ENDURON Crushers Excellent Minerals Solutions SP Series Cone Crushers
Introducing Enduron crushers from Weir Minerals.
The Enduron SP cone crusher is characterized by a unique and ingenious design, easily combining light weight, compact, and robust frames resulting in one of the most advanced cone crushers in the industry. Features and Benefits Higher Productivity The Enduron SP series cone crushers deliver one of the highest production capacity per ore ratio in the industry. Such a performance is achieved by combining the power of a higher eccentric speed - 375 RPM - with the potential of a bulkier crushing chamber. The former is achieved thanks to a better power transmission from the counter-shaft, which revolves at 800 RPM. The efficiency of the transmission is achieved by better gearing, which is partially due to the quality of the Spiral Beveled Gear Assembly used in Enduron cone crushers. The latter is the result of an ingenious design that features an increased mantle slope and a longer mantle shaft. A larger crushing chamber means higher material capacity, and faster eccentric speed results in more tons per hour produced when compared to standard cone crushers. As a matter of fact, the SP series cone crushers deliver 30 to 40% more capacity per hour than spring-type cone crushers. Additionally, the increased mantle slope feature confers a very cubical shape to the throughput essential for quality aggregate production. A larger crushing chamber means higher material capacity and faster eccentric results in more tons per hour produced, as opposed to standard cone crushers. Resulting from years of research and development, Enduron SP series cone crushers capitalize on extensive materials and engineering experience to design and manufacture these remarkably reliable crushers.
Minimal Downtime The Enduron SP series crusher features several characteristics that deliver minimal downtime for your operations. Low downtime means full operation of your crushers. And with a high performance cone crusher such as the SP series, it ultimately means quick return on your investment. All Enduron SP crushers are equipped with two 'adjust on the run' planetary gearbox hydraulic motors which allow you to unlock the top cell (bowl), adjust and re-iock all during full production. No need to stop operations. In addition, the hydraulic adjustment system aids not only in setting quick changes, but also in fast wear parts changes. The patented locking system allows you to change the liners in less than two hours. Low Operating Costs The SP series cone crusher combines several features and options that help you realize savings on your operating costs. The working environment of a crusher can be dusty, causing some parts to wear out fast and the lubrication oil to be contaminated. The patented dust seal system is equipped with an auto greaser and protects the crushers' dust-sensitive parts, leading to a longer service life, fewer spare parts change, and lower expense costs. 1 The SP series crushers also allow you to lower your labor costs. All adjustments and operations are fully automated. They come with an easy-to-operate control panel that requires no more than one individual to operate and a wireless remote control is offered for the convenience and freedom of your plant operators. 2 1: Adjust on-the-run planetary gearbox hydraulic motors 2: Tramp iron release system
The Enduron SP series crusher is an integral part of the Weir Minerals comminution solution. Easy-to-Operate Enduron SP crushers are built to make your operations and business run more smoothly and easily. Its simple and easy to read control panel provides you with the necessary information to properly run your crusher. For example, the SP crusher shows you the exact cone setting in millimeter, tenths and hundredths of a millimeter units. Easy-to-operate touchscreen control panel To enhance your crusher's life and maintain optimal crushing capacities, an automatic liner change reminder is included for your convenience. When new mantle and concave liners are installed, the automated reminder is reset. As the crusher operates, the system will track production capacities and calculate the liner wear rate. When the cone liners reach the maximum wear point, it sends a flashing reminder to 'change cone' on the cone setting meter. After the wear parts are changed, simply reset the automated reminder system and continue efficient, reliable crushing. Versatility The easy-to-operate touchscreen control panel for Enduron SP crushers can be used in a wide range of activities and for a wide range of products. The SP series has been widely used for applications ranging from mining and infrastructure development to quarrying and recycling industries. Moreover, each of the four models which encompass the SP series - the 100 model, 200 model, 300 model and the 400 model - can be mounted with a different concave to suit your throughput requirements: coarse or fine. Enduron SP crushers are designed for secondary or tertiary crushing purposes both in stationary and portable applications.
The Enduron SP series crusher your new crushing solution Dimensions Model Dimension (mm) A B C D R F SP 100 264 1119 1060 1450 1610 2667 SP 200 423 1445 1255 1808 2075 2945 SP 300 403 1583 1471 2126 2407 3252 SP 400 477 1770 1717 2505 2780 3727
Particle size distribution curves Accumulated Pass-Through (%) Mesh size (mm) Accumulated passthrough (%) Mesh size 13 mm 16 mm 19 mm 22 mm 25 mm 32 mm 38 mm 45 mm 51 mm 90 mm 100 96-100 75 mm 100 100 93-95 87-89 50 mm 100 100 92-95 83-86 79-82 70-72 38 mm 100 94-97 86-89 83-86 72-75 66-69 57-79 32 mm 100 92-95 86-89 79-82 70-73 63-66 52-55 48-51 25 mm 100 93-97 83-85 75-78 70-73 58-61 52-55 44-47 39-41 19 mm 84-89 79-83 71-74 63-66 58-61 48-51 43-46 37-40 31-33 16 mm 76-80 66-70 59-62 52-55 48-51 42-45 34-37 31-33 26-28 13 mm 65-70 56-62 52-55 43-48 40-43 34-37 30-33 26-29 21-23 10 mm 52-55 45-48 42-45 36-39 33-36 25-28 22-25 18-20 17-19 6 mm 34-39 28-32 23-28 19-22 17-20 16-18 14-16 12-14 8-10 Model No. Max Feed Size (mm) Min Dschrg Open (mm Motor Rating (kw) Throughput Ton/Hour (TPH) Closed Side Discharge Opening (mm) 13 16 19 22 25 32 38 45 51 Weight (Kg) SP100(C) 135 16 75-112 75-85 80-95 85-100 90-110 100-130 6800 SP100(F) 105 16 75-112 55-70 65-80 70-85 75-95 90-110 6800 SP200(C) 185 19 110-150 180-210 200-240 235-270 265-310 12000 SP200(F) 145 17 110-150 145-165 160-195 185-200 210-245 230-280 12000 SP200(S) 70 13 110-150 90-110 105-125 125-135 125-140 130--150 140-135 12000 SP300(C) 210 22 180-225 210-240 230-180 270-320 390-350 320-380 360-430 18700 SP300(F) 185 19 180-225 190-220 205-230 225-260 245-285 270-330 300-350 18700 SP300(S) 90 16 180-255 135-155 150-170 165-185 180-200 200-220 18700 SP400(C) 290 25 220-300 295-355 335-375 370-480 430-500 470-550 28400 SP400(F) 210 22 220-300 265-310 290-330 315-360 350-410 390-440 28400 SP400(S) 110 16 220-300 155-185 175-200 195-225 210-245 235-256 28400 * The above parameters for reference purposes only, subject to change without prior notice.
Geographical footprint Weir Minerals has the geographical presence to service all the major minerals markets around the world. This global supply capability provides a competitive advantage in this relatively fragmented market. Weir Minerals has operations across: North America Europe Latin America Australia Africa Asia Russia Service and support This global capability with our own dedicated service teams combined with the service centres of our sister companies within the Weir Group and those of our strategic partners provide support in virtually every developed market. Customer profile Our customers range from the world s largest minerals and mining multinationals to single pumpset operators. We support customer operations worldwide with consistent products and local engineering expertise. As part of the Weir Group, we have the reach and resource to build close, long term relationships with all our customers, helping them to achieve... The Lowest Cost of Ownership WARMAN Centrifugal Slurry Pumps GEHO PD Slurry Pumps LINATEX Rubber Products VULCO Wear Resistant Linings CAVEX Hydrocyclones ENDURON Comminution Equipment KHD* High Pressure Grinding Rolls FLOWAY PUMPS Vertical Turbine Pumps ISOGATE Slurry Valves MULTIFLO Mine Dewatering Solutions HAZLETON Specialty Slurry Pumps LEWIS PUMPS Vertical Chemical Pumps WEIR MINERALS SERVICES For further information on any of these products or our support services contact your nearest sales office or visit: www.weirminerals.com Weir Minerals Linatex - North America Excellent Minerals Solutions 1550 Airport Road Gallatin, TN 37066 USA Tel: +01 615 230 2100 Fax: +01 615 230 2101 www.weirminerals.com Copyright 2013, Weir Slurry Group, Inc.. All rights reserved. WARMAN is a trademark and/or registered trademark of Weir Minerals Australia Ltd and Weir Group African IP Ltd; CAVEX, HAZLETON, MULTIFLO are trademarks and/or registered trademarks of Weir Minerals Australia Ltd; LEWIS and LEWIS PUMPS are trademark and/or registered trademarks of Envirotech Pumpsystems Inc; GEHO is a trademark and/or registered trademark of Weir Minerals Netherlands bv; FLOWAY is a trademark and/or registered trademark of Weir Floway Inc.; VULCO is a trademark and/or registered trademark of Vulco SA; ISOGATE is a trademark and/or registered trademark of Weir do Brasil Ltda.; LINATEX is a trademark and/or registered trademark of Linatex Ltd; ENDURON, MATERIAL MATTERS and M2 Material Matters (logo) are trademarks and/or registered trademarks of Weir Minerals Europe Ltd; WEIR is a trademark and/or registered trademark of Weir Engineering Services Ltd. * KHD is a Humboldt Wedag GmbH brand used under license by The Weir Group.