ATL / MOT EQUIPMENT
DETAILED OVERVIEW Our play detectors are more likely to find fault than any other on the market as they accentuate any wear in steering Integral jacking beam has one of the highest lifting capacities on the market at 500mm Heavy duty recessed bearing radius plates - minimum maintenance Safety ladder locks on all posts Unique dimple design Fully galvanised chassis
Integrated rear slip plates allowing for dual usage when carrying out wheel alignment High quality finish platform Convex inspection mirrors Simple to operate icon-driven display Integrated inspection lamp incorporating buttons for play detector operation Wireless operation through tablet device
introduction MOT/ATL Equipment REDUCE TIME AND INCREASE ACCURACY Whether you are considering becoming a DVSA approved testing station, or renewing/modernising equipment in your existing bay, HOFMANN has a proven, totally integrated service that will help support you through all the required procedures and legislation requirements. Our in-house team based in our UK factory will guide you through the entire process. Our Area Sales Managers will visit your premises to provide advice on selecting the most suitable equipment mix and prepare quality drawings to support your application. Once your equipment is installed and your ATL/MOT bay is up and running, we can provide unrivalled product support, with over-the-telephone assistance from our dedicated team based in the UK. Our employed network of UKAS- and GEA-accredited engineers is on hand to provide calibration and routine maintenance to keep your investment in the best working condition. Our experience and dedicated team means the HOFMANN brand has an unparalleled reputation for providing the highest quality, excellent value and great service.
AUTOMATED TEST LANE HOFMANN s modernised, wirelessly-operated and tablet-enabled ATL is an industryleading, DVSA-approved automated test lane system for one-person operated MOT testing for class IV and VII with the optional class I, II, III and class VL ability. At the heart of the HOFMANN ATL is the geogas 5000, with a large 27-inch monitor providing clear visible information in your workshop. On top of that you have the convenience of the bay being completely wireless and being able to work via a tablet. This allows you to use the tablet to enter the results for the individual tests on the DVSA form as well as it being the driver for the brake and emissions test. Using the tablet means you can easily see the live readings without having to leave the vehicle. Your results can then be wirelessly sent to a printer that can be located anywhere in your garage. Individual customer vehicle details, data and test results can be stored for recall at any time. Using Windows-based, icon-driven software, the HOFMANN ATL requires minimum training for the test to be completed. Test procedures can be performed in fully automatic mode or manually. The geogas 5000 includes a wireless smoke head (Class A\Class B approved), a wireless RPM and oil temperature measurement device as well as a ripple\battery measurement function. Plus we have extended the capability of our emissions range to now include a new wireless EOBD RPM, oil temperature trigger device for diesel testing. This device allows triggering of low emission diesel vehicles RPM and oil temperature by simply plugging the adaptor into the EOBD port in the vehicle and the readings will be wirelessly transmitted back to the workstation. This new method has been officially approved. The brake rollers have a fully galvanised steel chassis for maximum protection against corrosion, and have been designed for installation into a dedicated recess. The unique dimpled rollers provide better grip in wet tyre conditions ensuring accurate brake testing and diagnosis. The 4 post lift comes with rear slip plates and turnplates built in as standard, along with a long 5.2m or 5.7m platform length. This high quality lift goes through a rigorous 66-point check procedure before it is even despatched to you for installation by our expert installation team. Features geogas 5000 with large screen plus tablet Class IV or VII lift with integral play detector Bearing radius plates Jacking beam 2000kg or 2800kg Class IV or VII roller brake tester, with easy-to-use PC software Brake roller cover plates Rail mounted headlight beam setter Can easily be upgraded to cover Class I and II tests Options ATL scissor lift with integral play detector Ancillary pack Lift 4000kg 5000kg 3500KG scissor 5000kg scissor Platform width 600mm 600mm 665mm 700mm Platform length 5200mm 5700mm 4600mm 5500mm Power 3kw 3kw 2.6kw 2.6kw Voltage 415v 415v 400v (3 phase); 415v Platform height when lowered 400v (3 phase); 415v 190mm 190mm 280mm 265mm Platform max height 1750mm 1750mm 1805mm 1805mm Overall length 5250mm 5750mm 4790mm 5710mm Overall width 3330mm 3330mm 2170mm 2240mm Overall height 2340mm 2340mm 1805mm 1805mm
atl/mot equipment SCISSOR LIFTS Features All pivot points made with self-lubricating bushings for long life Mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing position Hydraulic levelling system with a patented synchronisation device assuring constant levelling of lifting platforms regardless of weight distribution No cross rails or torsion bars between lifting platforms (for maximum accessibility to the working area) Every time the platforms reach the floor, the lift is perfectly levelled thanks to a patented valve Minimal platforms height 265mm or 280mm dependant on lift easy access including cars with low spoilers. Limited length. Dual revenue lift for class IV MOT and wheel alignment with front recesses for turntables and rear slip plates, and long platform Base plates with levelling system ensures easy installation Rear slip plates with pneumatic locking in true position, angular and transversal movements in both directions specifications Lift 3500kg Scissor Lift 5000kg Scissor Platform width 665mm 700mm Platform length 4600mm 5500mm Power 2.6kw 2.6kw Voltage 400v (3 phase); 415v 400v (3 phase); 415v Platform height 280mm 265mm when lowered Platform max 1805mm 1805mm height Overall length 4790mm 5710mm Overall width 2170mm 2240mm Overall height 1805mm 1805mm Fitted shaker plates
ONE PERSON TEST LANE (OPTL) The HOFMANN One Person Test Lane is a great opportunity for your garage if you already have an existing MOT Bay in your workshop. By upgrading your MOT Bay to a One Person Test Lane you can dramatically reduce your labour costs per MOT. That means you ll only need to take one technician into the bay to test rather than two, resulting in better efficiency in your workshop. A HOFMANN One Person Test Lane can use one of our standard ATL lifts or we have a special version that fits the majority of existing MOT lift recesses. Features Four post ATL lift Play detector Radius plates Pedal depressor Convex mirrors 130mm recess fitment * Extra-long platform Options Jacking beam Headlamp beam tester specifications Lift Class IV Low Profile OPTL lift class iv standard optl lift class vii standard optl Platform width 560mm 630mm 630mm Platform length 4480mm 4460mm 5700mm Power 2.6kw 2.6kw 2.6kw Voltage 400V - 3 phase 415v 400V - 3 phase 415v 400V - 3 phase 415v Platform height when lowered 130mm 160mm 175mm Platform max height 1900mm 1915mm 1932mm Overall length 4783mm 4970mm 6023mm Overall width 2855mm 3005mm 3355mm Overall height 2300 ( * 2614mm) 2300 ( * 2614mm) 2300 ( * 2614) * Only applicable to low profile lift option
atl/mot equipment PLAY DETECTOR The HOFMANN integrated suspension and steering joint play detectors are made to the highest specifications from strong, heavy-gauge steel, which provides a long-lasting structure tough enough for any workshop that is in constant use. The HOFMANN play detectors are more likely than any other on the market to find faults as they accentuate any wear in the steering. Features Hydraulic operation for maximum power Two sets of moving plates for maximum power and increased wear detection Meets and exceeds all class IV and VII DVSA specifications Fast one person inspection of steering and suspension joint and steering linkage components Auto self centering Controls are handled through the wireless inspection lamp * specifications Lift 4 Post Lift Scissor Lift Operation Electro-hydraulic Electro hydraulic Lamp Supply Low voltage 24v wireless Button supply Max capacity on each plate Max stroke lateral movement Max angle Pivotal movement Max thrust for each plate Low voltage wireless 1300kg 24v 1300kg ± 40mm ± 40mm 8º Degrees 8º Degrees 10 Kilo newton per wheel 10 Kilo newton per wheel * Wired control supplied with scissor lift option
STANDARD MOT BAY The HOFMANN standard MOT Bay is the entry level package that allows you to become a fully operational DVSA approved testing station. This option is part of our comprehensive range and allows your business to move into MOT testing on a budget. Should you wish to upgrade your MOT Bay to an Automated Test Lane at a later date, we have an upgrade option available. As expected with all HOFMANN products, our standard MOT bay provides a quality product with the service and support that you expect. Options Ancillary pack Headlight beam tester Features Class IV and class VII configurations Lift includes integrated jacking beam Safety ladder locks on all posts The HOFMANN brake testers have robust galvanised frames with long life brake tester rollers Cover plates as standard Recessed radius plates Specifications Lift 4000kg 5000kg Max vehicle lifting height 1820mm 1830mm Min ground clearance of lift 190mm 190mm Platform length 5200mm 5700mm Platform width 600mm 600mm Lift time 50sec 50sec Lowering time 45sec 45sec Power 3kw 3kw Voltage 415V 230-400V Frequency 50Hz 50Hz Noise 70dB(A)/1 m 70dB(A)/1 m Beam Setter Class IV Class VII Height 1520mm 1520mm Maximum height of beam 1410mm 1410mm Minimum height of beam 240mm 240mm Length 610mm 610mm Focal length 520mm 520mm Brake Tester Maximum axle weight 4000kg 6000kg Roller coefficient dry-wet 0.9-0.7/0.7-0.5 0.9-0.7/0.7-0.5 Operating temp 0 C - 70 C 0 C - 70 C Electronics Principle of measurement DMS DMS Processing of measured value Power Supply Microprocessor Microprocessor Voltage 3N - PE - 400 3N - PE - 400 V Frequency 50Hz 50Hz Fuse rating C TYPE 32 32 Motor power 2 x 3.7kw 2 x 3.7kw Main lead diameter 5 x 4mm 5 x 4mm Roller Frame Roller diameter 204mm 204mm Roller length 700mm 1000mm Roller displaced in height 25mm 25mm Idle running speed 5.2km/h 2.6km/h
atl/mot equipment PIT LANE The HOFMANN MOT Pit Lane is the package to consider for garages with height restrictions in their premises. The HOFMANN MOT Pit Lane is available in standard, ATL and OPTL configuration for class IV and class VII DVSA approved testing stations. Options Radius frame plate kit Please note: prefabricated metal pit (as illustrated above) only available from third party supplier at additional cost. specifications Operation Electro-hydraulic Max capacity on each plate 1300kg Max stroke platform P1 mm ± 40 Max angle platform P2 ± 15 Max thrust for each plate 800kg Minimum inner distance 800mm (suggested) Maximium outer distance 2020mm (suggested) Power 2.2kw Weight 150kg Working temperature 5-55 c
MOTORCYCLE UPGRADES Want to expand your workshop offering? Why not upgrade your bay to include Class I & II at the same time as purchasing your bay. Options Ancillary pack Features Brake tester Wheel alignment bars Motorcycle stand Image shows adapter kit in stand
atl/mot equipment HOFMANN BRAKE TESTER The new generation of HOFMANN Brake Testers now uses a solid state motor control system and for new HOFMANN ATL lanes includes wireless connectivity to the PC. With the wireless connectivity option between the roller chassis control box and the PC you have the flexibility to place your PC/display in the most convenient place in the workshop for testing (within the required range). The elimination of cables reduces the cause of trip hazards and wire damage. There are two chassis options available: 700mm rollers have a drive over capacity of up to 4000kg (800Kgf brake force) and can be used for MOT class I, II, III, and IV. 1000mm rollers have a drive over capacity up to 6000KG (1250Kgf brake force) and can be used for MOT class I, II, III, IV, VL and VII. (class I and II require optional adaptor plate). The chassis are built from fully galvanised steel for long life and roller covers as standard. The dimpled roller surface is designed to offer protection to tyres whilst giving a coefficient similar to the road surface, allowing for accurate and repeatable results wet or dry. The roller brake surface also includes a 10-year warranty. The graphical user interface is designed for ease of use and simulates the well known meter displays from the older analogue units whilst including all the benefits of modern technology and the latest ATL test procedure and manual brake testing functions. The weighing system allows weighing by wheel (standard on ATL, optional on non-atl) as well as the auto sensing 4x4 option as standard. HOFMANN Brake Testers are supplied with a 21-inch monitor, laser printer and database for saving test results as standard. Once the brake test is completed the results can be reviewed in the following ways: On the display with highlighting of any errors Printed and also recording reason for failure if applicable You can store the results into the database for recalling at a later date Recall and review the results in a graphical format. Options Motorcycle (class I and II) software package and cover plate Feature Locked roller for easy exiting of the roller specifications Maximum axle weight 4t 6t Roller coefficient dry-wet 0.9-0.7/0.7-0.5 0.9-0.7/0.7-0.5 Operating temp 0 C - 70 C 0 C - 70 C Electronics Principle of measurement Processing of measured value DMS Microprocessor DMS Microprocessor Power supply Voltage 3N - PE - 400 3N - PE - 400 V Frequency 50Hz 50Hz Fuse rating c type 32 32 Motor power 2 x 3.7kw 2 x 3.7kw Main lead diameter 5 x 4mm 5 x 4mm Roller frame Roller diameter 204mm 204mm Roller length 700mm 1000mm Roller displaced in height 25mm 25mm Idle running speed 5.2 km/h 2.6 km/h Dimpled rollers
JACKING BEAM There are two options of jacking beams available, 2000 kg for class IV and 2800 kg for class VII. They feature a two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. The beams have spring-loaded flat arms with roller bearings, and when unloaded these support the weight of the beam allowing the entire unit to run smoothly along the pit or ramp, but when loaded they locate the unit firmly. Options High rise adaptors available Features Purpose designed to fit lift Manually operated hydraulics Safety valve to prevent overloading Rubber topped lifting pad HEADLIGHT BEAM TESTER The HOFMANN Headlight Tester is a fully adjustable DVSA approved headlamp alignment unit that comes with a digital lux meter as standard. The Headlight Tester also benefits from two lasers: the first for longitude alignment with the vehicle; the second a forward-facing laser, central to the lens for setting the height against the vehicle. Both lasers come with a 30-second auto-off timer as standard. HOFMANN s Headlight Tester is approved by DVSA for the testing of all vehicle classes with the appropriate rails at four meters for cars and light commercials. For class V testing of HGV/PSV vehicles, an optional unit is available. Additional extension rails are available upon request. Options Class V HGV/PSV Track extension specifications Height Maximum height of beam measurement Minimum height of beam measurement Length Focal length 1500mm 1400mm 250mm 540mm 520mm Features DVSA approved for class I - VII (class V is an optional unit) Robust design Rail mounted (4.0m standard) for class IV & VII MOT Clear and simple to read aim screen Laser alignment visor with auto off timer for longitudinal alignment with vehicle Central lens laser pointer with auto off timer for correct height adjustment to vehicle lights Lens allows accurate focusing of all current types of headlights including gas and xenon Digital lux meter 360 degree turning of body on base 520mm focal length
atl/mot equipment GEOGAS 5000 With over 80 years of experience in the automotive aftermarket, the HOFMANN brand has become synonymous with quality and service with an unparalleled reputation for providing excellent value. The HOFMANN geogas 5000, diagnostic gas analyser and emissions platform has been developed with all the above qualities in mind, but also provides the modern workshop with an expandable tool that can grow and develop with your business. The geogas 5000 is available as a combined unit with the wireless smoke meter. With fast warm-up and initialisation the geogas 5000 Combi is ready for action in a matter of seconds. The unit is operated through a simple, icon-based navigation system that can be used without any special training. A remote control device is provided so that you can even operate the programme while sitting in the car or walking around the bay. The geogas 5000 Combi is powered by an industrial standard PC, with a large 27-inch flatscreen monitor providing the test technician with clear and easily visible information, plus a wireless printer for hard copy printout of test results. All the geogas 5000 Combi s component parts are housed in a modern and compact workstation that can be easily moved or placed where works best for you. The geogas 5000 is supplied with a remote mouse to allow operation from within the vehicle, and is compatible with HOFMANN s optional tablet for full remote functionality in or around the vehicle. The geogas 5000 Combi includes a wireless smoke head (Class A\Class B approved), a wireless RPM and oil temperature measurement device as well as a ripple\battery measurement function. specifications Operating temperature 5 C to 40 C Control Cabinet Height (including monitor) 1570mm Width 620mm Depth 580mm Weight 90kg approx. Power Supply Voltage 115/230 V Current 7.5/6 A Frequency 47 63Hz Gas Measurements Range O2 0-25% vol. CO 0-15% vol. CO2 0-20% vol. HC 0-10000 ppm vol. Prop. RPM 0rpm to 9999rpm C 0 C to 120 C Lambda (l) 0-9.99 AFR 5.00 to 50.00 (calculated) Plus we have extended the capability of our emissions range to now include a new wireless EOBD RPM, oil temperature trigger device for diesel testing. This device allows you to measure the vehicle s RPM and oil temperature by simply plugging the adaptor into the EOBD port in the vehicle and the readings will be wirelessly transmitted back to the workstation. This new method, which has been officially approved, allows triggering of low emission diesel vehicles. The geogas 5000 gives you everything you need in today s modern workshop for petrol and diesel emissions testing. Plus, if you own a HOFMANN brake tester, you can complete the entire emissions and brake test from the one unit. The geogas 5000 can also be upgraded to carry out computerised wheel alignment with HOFMANN's Prism alignment option. Options of petrol or smoke as separate units
WIRELESS SMOKE METER HOFMANN supplies the DSS 10 Diagnostic Wireless Smoke Meter as part of the geogas range of DVSA approved emissions testers. The wireless DSS 10 provides fast accurate testing of diesel emissions for both mandatory and voluntary test procedures. The Wireless Smoke Meter has an automatic standby mode which is activated if the unit is left out of the charger and is not in use, helping to preserve the battery power. When the unit is put back on the charging station the meter is constantly warmed up and instantly ready for use. Using a powerful industry standard PC, the HOFMANN emissions platform is expandable to allow the addition of other hardware and software options, transforming the wireless DSS 10 into a diagnostic information centre for the modern workshop. Features Wireless operation with extensive operating range Meets and exceeds all current DVSA specifications Fast autocal no seven-day calibration required Fast pass software included Smart technology ensures quick operation every time Approved for category A&B including RPC test Longlife and fast charge battery specifications Dimensions Weight Battery charger Low voltage powerful supply 190 x 123 x 145mm 4.1kg 115 / 230V ~ 50 / 60Hz (+15% / -10%) 9.6v Ni-MH battery Data connection Bluetooth Class 1 Smoke density range (m-1) Resolution (m-1) 0 9.99m-1 0.01m-1 Smoke density range (%) 0-100% Resolution (%) 0.1% Accuracy < 1.5% Operating temperature 5 C 40 C
atl/mot equipment HOFMANN provides a free survey and CAD drawing service to DVSA approved specifications to give you complete piece of mind. CLASS IV ATL BAY HOFMANN 4-tonne, 4 post lift (5.2m platform length) Integrated suspension and steering joint play detectors 2000kg jacking beam Rail-mounted headlight tester Captive bearing radius turning plates Calibration, certification and manuals Built in rear slip plates CLASS IV ATL PIT BAY Brake Tester Console Beam Setter ATL Class IV Captive Turnplates 2000kg Jacking Beam Calibration, certification and manuals
CLASS VII ATL BAY ATL Class VII HOFMANN 5 tonne, 4 post lift (5.7m platform length) Integrated suspension and steering joint play detectors 3000kg jacking beam Rail-mounted headlight tester Captive bearing radius turning plates Calibration, certification and manuals Built in rear slip plates CLASS VII SCISSOR ATL ATL Class VII HOFMANN 5-tonne, scissor lift (5.2m platform length) Integrated suspension and steering joint play detectors 3000kg jacking beam Rail-mounted headlight tester Captive bearing radius turning plates Calibration, certification and manuals * PLEASE NOTE: Dimensions shown are not minimum DVSA specification, but typically used examples
mot accessory pack Decelerometer Brake Tester The MOT Accessory Pack contains tools and equipment to help the test technician Decelerometer Brake Tester MOT Notice Board MOT Sign Pack Cordless LED Hand Lamp Windscreen Damage Template Autodata 3 Pack H/D Rubber Wheel Chocks (Pair) Wheel Chock Must Be Used - Lift Sticker Large Yellow Wax Markers (Box of 10) Shadow Panel with All Tools Tyre Tread Width Gauge 30-inch Tyre Lever Tyre Pressure Gauge Rolling Head Pry Bar 5m Steel Tape Wire Scratch Brush Corrosion Assessment Tool Tyre Tread Depth Gauge Trailer Socket Tester Leak Spray Options Motorcyle test accessories
UNCOMPROMISING QUALITY SINCE 1931 hofmann.co.uk tel: +44 (0) 1553 697233 email: ukequipment@snapon.com HOFMANN is a trademark of Snap-on Incorporated. Snap-on Incorporated 2017. All other marks are trademarks of their respective holders. Pictures are for illustration purposes only. Specifications are subject to change without notice. V.01.17