Potain Igo T 1 Product Guide Features 8 kg (17,637 ) maximum capacity 1 kg (86 ) capacity at 5 m (16 ) 5 m (16 ) maximum operating hook radius 37,3 m (1 ) maximum tip hook height with jib horizontal 61 m ( ) maximum hook height with 5 m (16 ) jib set at Variable height lattice mast from 19,3 m (63 ) to 37,3 m (1 ) with optional mast inserts EN 139 C25D25 EN 139 C5D5 FEM 1.1A3
Features Cab Mast inserts Increase your working height by up to 15 m (9 ) with optional mast inserts. Each insert is 6 m ( ) and provides the operator with additional heights under hook. Two cab options are available for the Igo T 1: the Ultra View cab is equipped with integrated controls and provides maximum operator comforts; the Cab 8 provides operators with an areal view and offers basic comforts. UL/CSA listed components SmartCom technology SmartCom is an embedded control system in CAN bus network which is based on a man to machine interface located in the control panel. This electronic system offers various functionalities which make putting the crane into service, as well as controlling the safety devices, faster and easier and makes crane maintenance easier than ever. The Igo T 1 is equipped with UL/CSA listed components in the main electrical panel for the North American market. Central lubrication Prolong the life of the slewing ring with our automated lubrication system. This centralized system allows the technician to program a specific grease application from a large reservoir ensuring the proper slewing ring gear and bearing lubrication on the job site.
Contents Specifications Transport 5 Weights 6 Dimensions 7 Crane profile 8 Load charts 9 Mechanisms 1 Metric dimension Metric crane profile 12 Metric load charts 13 Metric mechanisms 1 Symbols glossary 15
Specifications Jib Controls 7 m (15 ) radius standard offsettable lattice jib; 5 m (16 ) radius jib is optional. Jib can be offset to. Opening and aligning are carried out automatically by four hydraulic cylinders. Mast Telescoping lattice mast raised by an uaxiliary winch and pulley block. Hook heights of 19,3 m (63 ) and,3 m (73 ) achievable with standard mast. rotation possible during raising sequence. *Optional mast inserts Three (3) 6 m ( ) mast inserts available to reach a maximum horizontal hook height of 37,3 m (1 ). Increasing mast height with one insert provides hook heights of 25,3 m (83 ) and,3 m (93 ); second mast insert provides hook heights of 31,3 m (13 ) and,3 m (3 ); third mast insert provides a hook height of 37,3 m (1 ). Chassis Outriggers swing and lock into position. 5 m (16. ) square outrigger spread with m (13.1 ) maximum turning radius. 6 mm (23.6 in) square outrigger pads are stowed on the crane during transport. *Ballast Ballast requirement for the crane consists of, at minimum, eleven () slabs each weighing 5 kg (8929 ). An additional slab is required in some raised jib configurations. Maximum counterweight is permissible in all configurations except when forbidden, please consult the crane s manual for details. Wireless remote control provides information to the operator about wind speed, radius, hook height, load, and moment. Lights and buzzers alert the operator when nearing limits of operation. Battery charger and extra battery are provided with crane. Auxiliary push button tethered remote ensures continual operation in case of battery or other malfunction of the wireless remote control. Optional tethered remote control ensures continual operation with same functions and ergonomics as standard wireless remote control. Swing RVF 161 Optima+ slewing mechanism with maximum swing speed of.8 rpm. Progressive control of speed with counterslewing possible, antiload swinging system makes aligning the load and jib easier. Multiple rpm speeds possible depending upon parameter selected. Hoist 33 LVF Optima: 29.5 HP variable frequency hoist with 2 t (2.2 USt) line pull. Progressive speed change according to the accelerating or decelerating ramps. Optima allows the hoist to adapt its speed to the weight of the load. Trolley 5 DVF 5: 5. HP variable frequency hoist with 5 kg (2 ) line pull. Progressive speed change according to acceleration or deceleration ramps controlled by the frequency converter. Hydraulic equipment Hydraulic cylinders are used for unfolding the mast and jib. All actions are carried about by the remote control. *Optional transport axle sets Electrical requirement 8 volt, 6 Hz measured at the turntable. Power Control allows for a reduction in power supply for a proportional reduction in hoisting speed. Earth rod and electric cable stored on the crane during transport. Reeving SM/DM block for 2 (SM) or part line (DM). Manual removal of one pin to change between SM and DM. Anemometer Electronic wind speed meter to alert the operator of wind speed conditions. Provides selective display on the radio remote. Maximum in service wind speed is km/h (5 mph) and maximum out service wind speed is 15 km/h (93 mph). Axle sets are available for both jobsite and highway applications. Jobsite axles are rated for 25 km/h (15.5 mph) and highway axles are rated for 8 km/h (5 mph). *Optional equipment * STANDARD NORTH AMERICAN SPECIFICATION: includes 16 (5 m) jib radius, offsettable jib, preequipment for interference system, Top Zone, 3 mast inserts, 12 counterweight slabs and central lubrication. * Offsetable jib * Mast inserts 6 m ( ) * Electric slip ring * Central lubrication * Ultra View cab * Cab 8 * Cold weather kit * Top Zone * Top Tracing II * Transport axles and kits *Denotes optional equipment **Requires optional anemometer
Transport SL1/S215M 25 km/h / 15.5 mph 2,5 m (8.2 ) m (13.1 ) 17,15 m (56.3 ) 1,1 m (3.7 ), m (1 ) 2 m (6.6 ) 5,38 m (17.7 ) P2,7 m (1.7 ) P 5,3 m (17. ) 2, m (7.9 ) P1 SL1/J215M 8 km/h / 5 mph 2,5 m (8.2 ) m (13.1 ) 17,15 m (56.3 ) 1,1 m (3.7 ), m (1 ) 2 m (6.6 ) 5,38 m (17.7 ) P2,7 m (1.7 ) P 5,3 m (17. ) 2,5 m (8 ) P1 NOTE: Dimensions and weights may vary due to manufacturing tolerances. 5 Potain Igo T 1
Weights North American Highway Axle 2,5 m (8.2 ) m (13.1 ) 17,15 m (56.3 ) 1,1 m (3.7 ), m (1 ) 2 m (6.6 ) 5,38 m (17.7 ) P2 5,16 m (16.9 ) 2,6 m (8.5 ),61 m (15.1 ) P P1 *Other axle sets are available. Chassis data (in transort position) SL1/S215M 25 km/h (15.5 mph) SL1/J215M 8 km/h (5 mph) North American Highway Axle meters (feet) meters (feet) meters (feet) Overall length 17,15 56.3 17,15 56.3 17.15 56.3 Overall height 13.1 13.1 13.1 Overall width 2,5 8.2 2,5 8.2 2,6 8.5 Overhang 5,3 17. 5,3 17.,61 15.1 Weights Crane weight less counterweight: 27 96 kg 61,61 Counterweight for operation (12 slabs): 8 6 kg 17,15 Crane with counterweight: 76 56 kg 168,786 Crane with transport equipment SL1/S215M 25 km/h (15.5 mph) SL1/J215M 8 km/h (5 mph) North American Highway Axle kilograms (pounds) kilograms (pounds) kilograms (pounds) Gross (P) 1,359,139 8 67,96 Rear (P1) 19 2,59 19 2,9 2, Front (P2) 1 8 23,81 1 8 23,81 1 71 23,6 In transport with no counterweight: NOTE: Dimensions and weights may vary due to manufacturing tolerances. 6
Dimensions H () H+3 H+1 H+ * 19 * 18 171 161 151 1 138 1 5 2 6 2 15 3 16 96 378 86 3 3 H () 17,637 1 3 13 93 H+1 83 73 H+ 63 H+3 H () 9 19 99 89 H+1 7 H+ 6 H+3 H+3 139 98 17,637 2 5 R = 13 61 17,637 65 F1 5.3 USt 5 USt 61,61 17,18 (12 x 8929 ) F1 16. x 16. *For these heights, the load charts are reduced. Potain Igo T 1 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 7
Crane profile 177 171 16 157 151 1 138 131 125 8 2 15 98 92 59 6 39 33 13 7 15 kva 31 mph 13 7 13 39 92 15 8 131 1 157 171 Jib raised 21 3 197 19 18 177 171 16 157 151 1 138 131 125 8 2 15 98 92 59 6 39 33 13 7 13 7 8 H +3 H +2 H +1 H + 13 39 92 15 8 131 1 157 171 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts 138 98 15 96 16 378 16 3 6 59 17,637 16,31 13,9,95 1,2 9259 15 6 9 59 17,637 16,31 1,991 13,7, 1,11 939 138 5 59 82 17,637 16,755 1,3 12,5, 1,11 98 939 16 15 138 7 75 98 8818 98 2 86 8157 8157 65 92 98 15 2 8 125 131 138 1 151 157 16 796 68 6173 57 91 519 189 3968 378 37 37 86 796 68 6173 57 91 519 189 3968 378 37 37 86 8 82 98 8818 98 8157 8157 88 8818 92 98 15 2 8 125 131 138 1 151 15 796 68 63 57 51 96 6 9 38 378 796 68 63 57 51 96 6 9 38 378 89 92 98 15 2 8 125 131 138 98 8378 7716 755 65 663 56 91 96 98 8378 7716 755 65 663 56 91 96 61 82 89 92 98 15 18 17,637 16,9 1,3 13,7 12,6,6, 1,83 9921 939 98 8818 98 5 59 88 92 98 15 2 17,637 16,755 1,3 12,5, 1,11 939 8378 7716 755 65 8818 8378 7716 755 65 135 H () 378 16 15 138 H+ 96 H+1 1 13 86 18 171 161 151 175 165 156 16 1 156 17 137 151 11 1 1 96 98 16 92 98 15 2 8 125 131 138 13 8818 7716 755 63 57 5181 7 9 378 37 37 86 15 7 92 98 15 2 8 125 135 8818 98 7716 68 63 57 91 519 189 378 138 77 92 98 15 2 1 8818 7716 755 65 59 5512 96 9 96 8818 98 135 3197 Potain Igo T 1 6 H+3 H () 16 15 138 13 19 195 1 16 6 92 98 15 2 8 125 131 138 13 8818 7716 68 6173 5512 96 519 189 38 37 3197 2976 2756 6 15 63 92 98 15 2 8 125 135 8818 8378 796 1 59 51 96 519 189 38 37 3197 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 9
Mechanisms 98 65 H+1 H () H+ 16 15 138 77 92 98 8818 98 7716 755 65 16 15 138 1 12 133 123 8 V 6 Hz hp kw 29.5 33 LVF Optima fpm 1 2 17 7 5 56 87 13 8818 8818 8818 9 25 17,637 17,637 17,637 8818 9 5 DVF 5 m/min 9 98 18 (8818 17,637 ) 9 98 2 (2 8818 ) 9 98 3 ( 2 ) 5. RVF 161 Optima+ rpm.8 7.5 5.5 TVF 1 fpm 82 2x 2x3 IEC 6 31 19 kva + 8 V (+6% 1%) 6 Hz kva 35 kva 33 LVF Optima +25 % fpm 7 17 2 25 9 8818 Hoisting Trolleying Slewing Traveling 1 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Metric dimensions * * F1 5, t 5,6 t 27 96 kg 6,13 m 8 6 kg (12 x 5 kg) F1 * For these heights, the load charts are reduced. Potain Igo T 1 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Metric crane profile 5 m 5 8 6 2 38 18 16 1 12 1 8 6 2 15 kva 5 km/h 8 6 2 8 12 16 8 m Jib raised 6 m 62 6 58 56 5 5 8 6 2 38 18 16 1 12 1 8 6 2 H +3 H +2 H +1 H + 8 6 2 12 8 12 16 8 m THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Metric load charts 3 m 2 m 39 kg 7 m 5 kg 5 m m 1 kg 17 kg 295 kg 5 m 13,2 1 16 18,7 23 38 2 6 8 5 m 8 7 6 5 7 39 37 31 2 5 19 18 17 16 15 1 kg 39 37 31 2 5 19 18 17 16 15 1 kg 7 m 1,1 15 16 18, 25 38 2 6 7 8 7 68 59 51 6 1 39 37 31 5 5 5 21 1 175 17 39 37 31 5 5 5 21 1 175 17 2 m 15,3 16 18 25,7 27 38 2 m 8 76 65 57 51 6 1 39 38 35 295 275 255 5 kg 39 38 35 295 275 255 5 kg 3 m 5 m 7 m 2 m m kg kg 18,6 25 27,8 3 m 8 7 65 59 56 5 51 9 5 1 39 kg 39 kg 15,3 16 18,7 m 8 76 65 57 51 6 1 38 35 295 kg 38 35 295 kg 3,6 m 1 kg 1 m H (m) 17 kg H+1,7 m H+ 5 kg 5 m 7 m 2 m 3 m 55 9 6 53, 5, 7,, 5,7 7,7,7 1,7 6,1 3,1,1 37,1 29,3 m 39 kg 5 m 38 2 3,6 m 35 5 235 215 1 17 16 15 1 kg 7 m 21, 38 1 39 35 31 5 2 5 19 17 2 m 3 m 2,7 m 35 295 27 25 5 kg,8 29,3 m 39 kg 3,6 m 1 kg 1 m m kg H (m) H+3 5 m 7 m 61 58 59, 56, 2 m 3 m 15 kg 5 m 18,2 38 2 3,6 m 35 31 25 5 5 19 175 16 15 135 125 1 kg 7 m 19,3 38 1 38 27 5 5 5 19 175 16 15 m kg Potain Igo T 1 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 13
Metric mechanisms 29,8 m 295 kg H+1 H (m) H+ 5 m 7 m 2 m 5 m 7 m 2 m 6, 3,, 37, 23, 29,8 m 39 35 295 kg 8 V 6 Hz hp kw 29,5 33 LVF Optima m/min 3,2 16 53 63 1,6 8 17,5 31,5 kg 1 8 8 8 5 DVF 5 m/min 15 55 ( 8 kg) 15 7 (5 kg) 15 1 ( 5 kg) 5, RVF 161 Optima+ rpm,8 7,5 5,5 TVF 1 m/min 25 2x 2x3 IEC 6 31 19 kva + 8 V (+6% 1%) 6 Hz kva 35 kva 33 LVF Optima +25 % m/min 63 53 1 kg Hoisting Trolleying Slewing Traveling 1 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Symbols glossary Jib Mast Anemometer Swing Outrigger Chassis Hydraulic equipment Controls Electrical requirement Ballast Transport axle Ballasting derrick Reeving Hoist Trolley Jib extension 15 Potain Igo T 1
Manitowoc Cranes Regional headquarters Americas Manitowoc, Wisconsin, USA Tel: +1 9 68 21 Fax: +1 9 683 6277 Europe, Middle East, Africa Dardilly, France Tel: +33 () 18 Fax: +33 () 18 China Shanghai, China Tel: +86 21 657 Fax: +86 21 657 955 Greater AsiaPacific Singapore Tel: +65 6 88 Fax: +65 6862 Shady Grove, Pennsylvania, USA Tel: +1 717 597 8121 Fax: +1 717 597 62 Regional offices Americas Brazil Alphaville Mexico Monterrey Chile Santiago Europe, Middle East, Africa France Baudemont Cergy Decines Germany Langenfeld Italy Lainate Netherlands Breda Poland Warsaw Portugal Baltar Russia Moscow South Africa Johannesburg U.A.E. Dubai U.K. Buckingham 1 Manitowoc Form No. Igo T 1 PG Part No. 1 China Beijing Chengdu Guangzhou Xian Greater AsiaPacific Australia Brisbane Meourne Sydney India Chennai Delhi Hyderabad Pune Korea Seoul Philippines Makati City Singapore Factories Brazil Passo Fundo China TaiAn Zhangjiagang France Charlieu Moulins Germany Wilhelmshaven India Pune Italy Niella Tanaro Portugal Baltar Fânzeres USA Manitowoc Port Washington Shady Grove This document is noncontractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment. www.manitowoccranes.com Powered by TCPDF (www.tcpdf.org)