vshine BOLLARD LED Bollard Luminaire Introduction The vshine Bollard is a reliable, highly vandal resistant lighting system. It achieves over 2000 lumens at a incredibly low level of energy making them perfect to run off 12 or 24 volts DC as well as AC power. The system s housing offers 2 sizes (low profile and High profile), together with forward throw type IV and V optics allowing for various applications ranging from Landscape, neighbourhood illumination, Pathways and community areas. vshine Bollard can be spaced up to 40 meters (130 feet) and meet a variety of pathway illumination standards. Dimensions Model No. (in) L W (in) H Weight (lb) (Kg) VBL-L6/L8 7.1 180 7.1 180 4.57 116 3.0 1.5 VBH-L6/L8 7.1 180 7.1 180 6.14 156 4.2 2.1 Ordering Information vshine Product Number of LEDs Driver Distribution LED Finish** Voltage Color Temperature Control VBH = HIGH VBL = LOW L6 = 6 L8 = 8 100 = 100mA 125 = 125mA 175 = 175mA 250 = 250 ma 300 = 300mA 350 = 350mA 480 = 480 ma 575 = 575mA 700 = 700 ma 900 = 900mA 1050 = 1050 ma T4 = IV T5 = V S = Standard P = Performance BKA = Black NLA = Natural BZA = Bronze V1 = 90-305 V V2 = 347-480 V (1) VS = Solar 30K = 3000 45K = 4500 55K = 5500 COEMS = External Motion Sensor (6) COTD = Time diming TD1- TD10 (5) COGC = Glare Control Standard: NLA Standard: V1 Standard: 45K Example: VBH-L6-100-T4-S-BKA-V1-30K-COEMS 1 347-480 V - No additional cost. 2 All lamps are configured to 4500K-5000K. 3000K-6000K available on request. Consult with your agent for lead times. 3 Dimming options factory programmed available on request. 4 External motion sensors used for wall or pole mounting separate to the fixture. * The 1050 ma model is available with up to 8 LEDs. ** Other body colors available upon request. Valen Light LLC reserves the right to make changes at any time in order to supply the best product possible.
Performance Data Lumen Output Lumen values are from photometric tests performed in accordance with IESNA LM-79-80. Data is considered to be representative of the configurations shown, with the tolerances allowed by Lighting Facts. Actual performance may vary as a result of end-user environment and application. Model LEDs Drive System Watts Lumens Lumens Standard Performance VB-L6-H/L 6 100 2 194.4 235.7 VB-L6-H/L 6 125 2.2 242.0 292.2 VB-L6-H/L 6 175 3.1 333.3 403.6 VB-L6-H/L 6 250 4.4 460.0 562.9 VB-L6-H/L 6 300 5.3 542.7 665.7 VB-L6-H/L 6 350 6.2 660.0 764.0 VB-L6-H/L 6 480 8.7 800.2 1014.1 VB-L6-H/L 6 575 10.5 919.1 1178.1 VB-L6-H/L 6 700 12.92 1059.4 1379.4 VB-L6-H/L 6 900 16.73 1249.7 1668.5 VB-L6-H/L 6 1050 19.35 1460.0 1856.6 VB-L8-H/L 8 100 2.63 259.2 314.2 VB-L8-H/L 8 125 3.31 322.6 389.6 VB-L8-H/L 8 175 4.68 444.4 538.1 VB-L8-H/L 8 250 5.9 614.1 752.9 VB-L8-H/L 8 300 7.13 723.6 896.0 VB-L8-H/L 8 350 8.38 880.4 1030.1 VB-L8-H/L 8 480 11.62 1066.9 1352.2 VB-L8-H/L 8 575 14.03 1225.5 1570.8 VB-L8-H/L 8 700 17.23 1412.5 1839.3 VB-L8-H/L 8 900 22.3 1666.3 2224.7 VB-L8-H/L 8 1050 25.8 1946.7 2475.5 Temperature Multipliers Ambient Temperature Lumen Multipliers 0ºC 32ºF 1.05 10ºC 50ºF 1.03 20ºC 68ºF 1.01 25ºC 77ºF 1.00 30ºC 86ºF 0.99 40ºC 104ºF 0.97 Photometric Diagrams To see complete isometric reports or to download.ies files, go to Valen Light s vshine Bollard. Axial Candela Display LCS Display Features & Characteristics APPLICATIONS The vshine Bollard is ideal for commercial, industrial and residental site lighting applications, including pathways, building areas, walkways, and civic / community centres. The powerful lighting fixture offers powerful, low-maintenance nighttime illumination. CONSTRUCTION Die-cast aluminum bottom and top sections are mechanically joined to the extruded pole section. Our unique construction allows for passive cooling and natural cleaning of the top section, ensuring thermal control with reliable operation at 45-50 C high ambient conditions. Stainless steel fasteners and security screws allow access to electrical components for installation and maintenance. OPTICS vshine optics are precisely designed to shape the distribution, thereby maximizing efficiency through product spacing. The vshine optics are engineered from Poly-meth-methyl-acrylic-optical grade (PMMA) PC, which optimizes light transmission. The average transmittance in the visible spectrum is 400nm~700nm>90%. Meets global pathway standards and glare index. LEDS Manufactured with the Cree XLamp XP-G2 LED, the vshine Bollard is capable of up to 429 lumens when driven at 1.5 A. Calculated L70 value of 250,000 hours based on in-situ testing, LM-79 data and LM-80 data. Flux Characteristics (Tj = 85 degrees Celsius). ELECTRICAL The Philips Advance Xitanium LED driver offers up to 92% efficiency. It is mounted directly to aluminum back casting for optimal heat dissipation. Standard driver input is 90-528 Volts AC with an IP 66 rating and a power factor of 0.99. Optional dimming and occupation sensor functions maximize energy efficiency and user control. MOUNTING 4 security screws lock the vshine Bollard head onto the Adaptapole aluminium pole section. Drivers are monted insid ethe pole FINISH Cast components are finished in a revolutionary anodised 2 step finish for superior weather, wear, and fade protection. Standard colors is black. RAL and custom color matches are available. The anodised process utilises architectural 2 step finish for maximum UV, salt and caustic environmental conditions. WARRANTY Five year limited warranty on LEDs and driver. Ten year warranty on mold and extrusion. Valen Energy LLC reserves the right to make changes at any time in order to supply the best product possible.
M15-1SP Introduction The vertaic Solar powered bollard powerstation series is the most powerful solar bollard on the planet, It integrates unique solar panels vertically to capture the sun in all directions, Highly vandal resistant with glassless solar panel technology providing power without having to run any underground cabling. Just simply secure it to the ground and your completed. For lighting the 1 meter bollard full night operation middle of winter delivers over an unprecedented 500 lumens and over 1000 lumens running half night operation. Reduce your projects up front cost through zero underground reticulation works and wider spacings through the vshine Bollard lighting head optics. For power requirements the systems can power around 20 watts for 12 hours or 6 watts for 24 hours ( for larger power requirements see Vertaic column power stations. 2014-2015 Valen energy, L LC. All rights reserved.
Dimensions Model No. (in) L W H1 H2 H3 Weight (lb) (Kg) -DB 6.89 175 6.89 175 34.5 900 18.5 470 0 0 73.0 33.5 -DB 6.89 175 6.89 175 59.0 1500 18.5 470 25.59 650 86.0 39.8 -DB 6.89 175 6.89 175 67.0 1700 18.5 470 0 0 93.1 42.2 -DB 6.89 175 6.89 175 86.5 2200 18.5 470 20.57 520 113.9 51.7 : level H1= LED mounting height and may vary slightly Ordering Information vps Pole Height* Mounting Solar Panels Extreme Batteries Operation Profile Finish Infill Panel Height VPS M10 = 1 meters M15 = 1.5 meters M20 = 2 meters AB = anchor base DB = direct bury 1LP = 1 large panel 1SP = 1 small panel 1LB = 1 large battery 2LB = 2 large 3LB = 1 large 4LB = 1 large 1SB = 1 small battery 2SB = 2 small 3SB = 1 small 4SB = 1 small FN = full night 9hr night 9-1 9-2 9-3 9-4 6hr night 6-1 6-2 6-3 6-4 3hr night 3-1 3-2 3-3 3-4 BKA = Black NLA = Natural BZA = Bronze MB = Metalic Black (standard) MS = Metalic Silver MW = Metalic White MI = Mirror WG = Wood grain SB = Standard Blue SG = Standard Green SY = Standard yellow SO = Standard Orange SR = Standard Red 300 = 300 mm 600 = 600 mm * Pole Height - All sizes in model no. are nominal sizes, see above table for lamp heights Example: VPS-M30-AB-1LP-1LB-FN-BKA 1 12 Volt DC solar column lighting system. 2 Coating- Achitectural 2 step anodising for longevity in full sunlight 3 INfill panels can be substituted with local artwork or advertising- Ask your local distributor for details 4 Large / Small panel refers to panel size which is information not available. All systems are designed to the minimum Peak sunlight hour for that region and has solar panels to suit those conditions. 5 Pole heights are Nominal. Actual heights are listed below on this data sheet under the table dimensions. 6 Large / Small Battery refers to the battery sizes which is information not available. All systems have a back up of 4-5 days based on the load selected. 7 Other body colors available upon request as powdercoat options. * Pole Height - All sizes in model no. are nominal sizes, see below table for actual height ** Height - total maximum height of Anchor base pole is 8 meters and 7.1 meters for the direct bury option Valen Light LLC reserves the right to make changes at any time in order to supply the best product possible.
Performance Data Lumen and Wattage Output per Location Lumen values are from photometric tests performed in accordance with IESNA LM-79-80. Data is considered to be representative of the configurations shown, with the tolerances allowed by Lighting Facts. Actual performance may vary as a result of end-user environment and application. Height Model No. Run Time Lumens Lumens Lumens 1 vps- Full night 8 920 6.5 747.5 4 460 1 vps- Half Night 18.5 2127.5 15 1725 9.5 1092.5 1.5 vps- Full night 8 920 6.5 747.5 4 460 1.5 vps- Full night 19 2185 15.5 1782.5 10 1150 1.5 vps- Half Night 18.5 2127.5 15 1725 9.5 1092.5 1.5 vps- Half Night 45 5175 36.5 4197.5 23.5 2702.5 2 vps- Full night 19 2185 15.5 1782.5 10 1150 2 vps- Half Night 45 5175 36.5 4197.5 23.5 2702.5 Features & Characteristics APPLICATIONS - The vertaic Column is ideal for commercial, industrial and residential site lighting, Wifi hotspots, Communications, pumps, Cellular device and laptop charging. CONSTRUCTION - 6000 series T6 Aluminium extrusion. Our unique construction allows for passive cooling and natural cleaning of the solar panels and internal, ensuring thermal control with reliable operation at 45-50 C high ambient conditions. Stainless steel fasteners with hidden access hatch to electrical components and battery. SOLAR PANELS - Vertaic utilises cutting edge glassless encapsulant for solar panels that will never shatter and are as vandal resistant as possible all whilst increasing panel efficiency and sunlight harvest when compared to glass type solar panels. BATTERIES - Our extreme temperature have been manufactured with a high temperature electrolyte, increased battery plate width and adjusted electroyte ratio allowing for an increased temperature range of -39 to +68 degrees Celcius ELECTRICAL - All electronics are located inside the pole for maintenance and accessability. MPPT solar charge control with 98% efficiency, DC double pole circuit breakers, wago quick connect terminal blocks with room for any type of electronics for switching. MOUNTING - Anchor base or direct bury options available. All vertaic product comes complete fully assembled ready to install onto your chosen mounting option. FINISH - Architectural anodised 2 step process in natural, Black and Dark bronze. Standard colors is Natural anodise. RAL and custom color matches are available as optional. WARRANTY - Five year limited warranty on Electronics and Batteries. Ten year warranty on solar panels, mold and pole assembly. Valen Energy LLC reserves the right to make changes at any time in order to supply the best product possible. 2014-2015 Valen energy, L LC. All rights reserved.