Needle Valves B

Similar documents
Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments

Oil and Gas Products Pressures to 30,000 psi

Products for the Oil & Gas Industry

3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)

Manual & Automated Ball Valves

Parker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)

SUBSEA VALVES

Ball Valves Pressures to 21,000 psi

Introduction. Application & Installation. Integral Block & Bleed Valves

* Contact your sales representative for compliance to NACE MR or later requirements.

115 Series, Needle Valves, Single Block, Male x Male

)SLIM LINE) MONOFLANGE VALVES

Static Pressure Manifolds PTM and PT7 2-Valve Manifolds

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas

* Contact your sales representative for compliance to NACE MR or later requirements.

Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control

Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features

HOKE Monoflange Valves. Primary Isolation Valves

CONTROL CHOKE SINCE1958. Unique. Precise. Quality. Reliable.

Manual & Automated Ball Valves

Floating Ball Valve - Design Features

413 barg 38 C 200 barg 230 C psig 100 F 3000 psig 750 F

General Specifications

STC Manual & Actuated Process Valves

Ball Valves 2-Way Series

Natural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds

Ball Valves 2-Way Series

P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S

Multi-Port Gauge Valves M5 and M51

Swing - Out Ball Valves. High Technology Valve & Fitting Series

IFC Series DR Retainerless Dual Disc Check Valves

197C. Valve Group. Series Farris Engineering Pressure Relief Valves

Swing - Out Ball Valves. High Technology Valve & Fitting Series

Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve

Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.

Anderson Greenwood Instrumentation Products - Manifolds and Accessories

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES

P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S

MV1. Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer. Cert. No License No. 6D-0840

QSS: Quick Set System. Product Catalog Compression Sleeve Valves and Fittings to 15,000 psi (1034 bar)

we are very grateful to our valuable customers who have shown a deep attention on to KpLÕ s growth and extended generous supports.

TRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type

TECHNICAL PRODUCT DATA SHEET

We Are the Worldwide Provider for All Your Valve and Fitting Needs

Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary

Anderson Greenwood M4TL Liquid Level Manifolds

Mallard Control Control Valves

TECHNICAL PRODUCT DATA SHEET

We Are the Worldwide Provider for All Your Valve and Fitting Needs

Instrument Manifold Valves

SWB 310 SERIES SWING - OUT BALL VALVES

TY-FLO 3 Piece Ball Valves

TECHNICAL PRODUCT DATA SHEET

TY-FLO 3 Piece Ball Valves

Medium and High Pressure Product Presentation

Kerotest KM4AP & KM4TP Static Pressure Manifolds

FILTERS, STRAINERS AND VALVES PRODUCT GUIDE

TY-FLO 3 Piece Ball Valves

Mark 6127 Series. Pressure Regulators Mark 6127 Series. Pressure Reducing Valves. Valve Features. Operation

Anderson Greenwood M25/M251 Block and Bleed Gauge Valves

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation. Motion & Flow Control Products, Inc

PH Series Pressures to 11,000 psi (759 bar)

HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.

Instrumentation Manifold Valves

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.

General Specifications

Anderson Greenwood M24A/M24T Differential Pressure Manifolds

Series MANIFOLD SYSTEMS BALL VALVES CHECK VALVES 3-WAY BALL VALVES THROTTLE BALL VALVES POPPET DIVERTER VALVES MANIFOLD COMPONENTS

Instrumentation Manifold Valves

Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation BALLVALVE.COM

M A N I F O L D S Y S T E M S 3 - WAY B A L L VA LV E S O P T I M U M - F L O W T E C H N O L O G Y B Y P I P E R

Forged Floating & Trunnion-Mounted Ball Valves

BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.

Installation Operation and Maintenance Instructions Model Contents

Static Pressure Manifolds M25, M25A, M25B, M251 and M251B

API 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG

Anderson Greenwood M1/M110 Differential Pressure Manifolds

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

T5 Series Pressures to 5,000 psi (345 bar)

TRUNNION BALL VALVES. TBV 7.10

ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS

Accutubes. Accuracy True double averaging design +1% of rate accuracy +0.1% repeatability Tested and certified by independent flow labs

Mark 5108 Series. Back Pressure Regulating Valves Mark 5108 Series. Back Pressure Regulating Valves. Valve Features. Operation

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN

SAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves

Contents. General Arrangements 1 Horizontal Mounts 2 Vertical Mounts 3 Transmitter and Adapter Mounts

International Standard Valve, Inc. Trunnion Mounted Ball Valve

TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port

Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L

Model 5400 / 5450 Control Valve

Anderson Greenwood PTM/PT7 Static Pressure Manifolds

CACTUS FLOW PRODUCTS

Static Pressure Manifolds M4AP and M4TP Manifolds

PERFECTION IS OUR STANDARD...

Mark 608 Series. Pressure Regulators Mark 608 Gas Pressure Regulators. Gas Pressure Regulators. Specifications. CRN Registration Number Available

ANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM

Flow Limit Safety Shutoff Valves Model 1

Designing Solutions For Technical Applications. Product selections

Transcription:

Subsea Needle Valves Description Detail MAWP Orifice CV Barrior Body Stem O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem B-4957-01 Sub-Sea Needle Valve -way Straight 6,000 psig 0.75 3/8 SAE 1 9,000 psig Valve Features Internal stem threads protected from ingress of crud and debris Pressures to 15,000 psi with M/P connections Higher flow with larger trim options Available in Multi-Stem manifold valves API flange face mount options Can be produced in CE and CR alloys 4.00'' 3.5''.81'' 4'' 6.15''.75''.50'' dia.94''.94'' 1.5''.50'' 6

Additional s For more information, please contact factory. nd Item Number Description Detail MAWP Orifice CV Subsea Check Valves B-3865-0 Subsea Check Valve Poppet s B-4560-01 B-474-01, with 3/ MP tube stub adapter B-4760-01 -way angle, 1/ FNPT x 1/ MNPT B-5063-01 B-5567-0 -way angle, with replacable seat 0,000 psig.09 C-145-01.4 C-1555-01, API BX-151/CE MRO175.359 C-1754-01 Needle Valve, API BX-151/CE MRO175.47 C-177-0 Needle Valve -way angle, API BX-151/CE MRO175.47 C-399-01 Needle Valve Assembly -way angle.5 C-39-01.4 C-540-01.4 D-35-01.47 D-36-01.47 Ball Valves - -Way 90 Degree Turn C-1641-01 C-513-01 C-336-01 C-418-01 C-178-01 C-33-01 C-311-01 C-83-01 C-935-01 C-30-01 C-303-01 C-307-01 C-3037-01 C-3130-01 C-8-0 C-3489-01 C-3567-01 C-3591-01 C-3618-01 C-369-01 C-1903-01 C-14-01 C-461-01 C-3143-01 C-3300-01 C-3358-01 C-3443-01 C-1148-0 C-195-01 Metal Boss Seal Valve Ball Valve SOG Ball Valve Assembly Subsea -Way Ball Valve, 90 degree turn, 90 degree turn, Sour Gas, Sour gas -way/90 degree turn -way/90 degree turn 1,500 psig.47.500.31.46 0.31.500 7

Barrior Body Stem Trunnion O-Ring Connection Actuator Length Width Height 3/8 NPT 3.5 1.1 1.1 6.5 6. 1/ NPT 7.15 315 1/ NPT 1/ HP 7.05 annld 1/ NPT 9.7 annld 9/1 MP 5 annld 1/ NPT 5 11. annld 1/ NPT 5.90 4 9.9 annld Inconel 75 1 MP 9.8 1/ FNPT 9.75 3/ MP x 1/ FNPT 9.75 annld 1/ FNPT 3 4 annld 1/ FNPT 3 4 Monel K500 viton 5.75 5.75 6.8 05 Duplex 507 Duplex 5.3 7.75 annld.37 1/ FNPT 8.69 annld 3/8 M/P 5.1.59 3/ MP 6. annld 5.1 7.8 6.8 EPDM 7.3 6.8 6.8 5.7 5.7 Alloy 65 4.5 annld 3/8 M/P Blade.75 6.8 5.6 Alloy 65 Blade.75 7.7 05 SD 5.1. 6.7 annld 7.75 5.1.8 Nipple Blade 5.8 inconel 65 8.0 6.8 Alloy 65 4.5 1.75: 8. annld 5.1.59 8

Additional s For more information, please contact factory. nd Item Number Description Detail MAWP Orifice CV Ball Valves - -Way 90 Degree Turn C-1949-01 -Way -way/90 degree turn C-3060-01 8,000 psig C-33-01 C-34-01 C-78-01 C-3-01 -way/90 degree turn 6,000 psig C-3-01 C-98-01 0.61 30 C-3396-01 -Way Ball Valves - 3-Way 90 Degree Turn C-3460-01 C-1958-01 3-Way C-1980-0 Subsea 3-Way Ball Valve C-046-01 C-336-01 C-345-0 C-641-01 3-Way C-969-01.31 C-306-01 C-338-01.8 C-3435-0 C-348-0 7.5 Ball Valves - 3-Way 180 Degree Turn C-1838-01 3-Way Ball Valve 3-way Ball Valve, 180 deg turn C-556-01 3-Way C-308-0 Assembly C-351-0 Assembly C-3439-0 8,000 psig Ball Valves - 4-Way 90 Degree Turn C-1166-01 4-Way C-1803-01 4-Way C-1900-01 4-Way.15 x 1. C-1971-01 4-Way W/O Adapters.34 0.1 C-041-01 C-134-0 Ball Valve C-148-01.8 C-378-01 C-466-01.8 C-485-01.8 C-3474-01 4-Way x.15 1. C-3487-01 x.15 1. Ball Valves - 5-Way 180 Degree Turn C-136-01 5-way, 180 degree turn 9

Barrior Body Stem Trunnion O-Ring Connection Actuator Length Width Height annld 05 Duplex annld 507 Duplex 507 Duplex Nipple.75 Nipple nipple 1 Nipple 3/ M/P Blade Blade 5.5.37 3 5.7 9.7 7.6 9.7 7.81 9.7 annld annld annld annld 507 duplex annld 1/ FNPT 1 FNPT Blade.75.37 6.1 6.38 7.17 6. 7.3 8.5 7.35 6.8 9.1 5.79 8.5 annld annld 05 Duplex 05 Duplex annld 17-4 PH Alloy 65 507 Duplex viton.38 5.1 7.35 7.57 5.57 8.61 annld annld annld annld annld annld annld annld annld annld annld annld Monel K500 17-4 PH Varous 1/ FNPT 1/ FNPT 8.1 5.4 5.1 5.4 5.4 5.7 5.58 4.47 annld 5.3 30