Lifts Beissbarth Vehicle Lifts The perfect measurement station Ideal for customer reception areas Practical for quick tyre service
Wheel Alignment Brake Testers Vehicle Testing The Beissbarth v 2-post Vehicle lift E = Electro mechanical, H = Hydraulic Number of posts Generation (Index) Load capacity VLE 2130 VLE 2130 F VLE 2130 E VLE 2130 EL VLE 2140 EL VLH 2140 VLH 2155 VLH 4145 L VLH 4245 LA VLH 4345 LA F = Base, E = Electro synch, L = Platform Lift L = De Luxe edition, A = Alignment 4-post A Option for wheel alignment 2
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts ehicle lift range Small scissors H = Extra high, L = Platform Lift Load capacity Generation (Index) 3 = Short platform, 5 = Long platform S = Scissors Vehicle lift A = Alignment Large scissors VLS 3130 VLS 3132H VLS 5140 L A VLS 5150 L A Option for wheel alignment A 3
Wheel Alignment Brake Testers Vehicle Testing Lifting and measurement Beissbarth vehicle lifts are back. The perfect lifting and measurement station. For quick service, vehicle inspection, customer reception. 4
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts Contents 2-post... 6 4-post... 14 Small scissors... 20 Large scissors.... 26 Technical appendix.... 38 5
Wheel Alignment Brake Testers Vehicle Testing 2-post design with guaranteed stability 6
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts 2-post VLE 2130 VLE 2130 F VLE 2130 E VLE 2130 EL VLE 2140 EL VLH 2140 VLH 2155 VLE for Electromechanical VLH for Electrohydraulic 2-post vehicle lifts: Practical wheel-free scissor lifts. Ideal for service and repair work under the vehicle or on wheels. Robust, multi-functional, hardwearing. Beissbarth offer 2-post lifts: With or without frame With electromechanical or With electrohydraulic drive. 7
Wheel Alignment Brake Testers Vehicle Testing Fully enclosed spindle VLE 2130 F Electromechanical 2-post lift: Chain drive: Reliable, stable and hardwearing Chain in self-supporting frame Ideal for thin floors (minimum 140 mm) Rapid lifting/lowering: 45 seconds only 3.0 t Door guard Reliable, automatic lifting arm locking without gear wheel 3-piece lifting arms at front also suitable for short vehicles Pad height only 100 mm Lifting height: 2005 mm Automatic lifting arm locking without gear wheel, with screw thread and brake Self-lubricating lifting spindle for less maintenance Version VLE 2130: Without self-supporting frame Chain under hot-dip galvanised metal guard (height only 34 mm) Pad height: 85 mm Min. floor thickness 210 mm Further info: Pages 40-42 8
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts Cable gantry included in scope of delivery VLE 2130 E Electromechanical 2-post lift: Simple lifting with no frame Cable gantry Two motors Asymmetric lifting arms Two motors No oil spatter: Flexible lifting spindle cover Automatic lifting arm locking (with gear wheel) 3.0 t Extremely low pad height Low pad height of only 85 mm (suitable for lowered sports cars) Lifting height 2005 mm: For ease of working under vehicles Electronic level control Little maintenance required (grease lubrication) 4 rollers for minimal wear Loadbearing nut made of special plastic with long-life lubrication Asymmetric lifting arms for rapid raising of passenger cars and smaller commercial vehicles Further info: Pages 40-42 9
Wheel Alignment Brake Testers Vehicle Testing Cable gantry included in scope of delivery VLE 2130 EL Electromechanical 2-post lift: No frame but a hint of Luxury Fully enclosed motors and electronics No mechanical connection, with cable gantry Energy set Rapid lifting in just 45 sec. 3.0 t Energy set with 230 V socket and compressed air connection at each post Pad height only 85 mm (also suitable for sports cars) 3-piece lifting arms at front 420-830 mm and rear 840-1340 mm Electronic level control Lifting height: 2005 mm for the biggest of the big Automatic lifting arm locking without gear wheel (screw thread with brake) Rubber door guard Further info: Pages 40-42 10
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts VLE 2140 EL Cable gantry included in scope of delivery Electromechanical 2-post lift: Suitable for almost all passenger cars, vans and off-road vehicles Also for lifting small vans up to 4 t All components reinforced 4-piece, symmetrical lifting arms Energy set Pad height only 85 mm (also suitable for sports cars) Reliable, automatic lifting arm locking without gear wheel No mechanical connection, with electronic level control Lifting arms specially designed for longer passenger cars, vans and small commercial vehicles between 660 mm and 1680 mm, also suitable for sports cars and off-road vehicles Lifting time just 45 sec. Further info: Pages 40-42 As compared to -30 EL: Reinforced post section and base Longer 4-piece symmetrical lifting arms Spindle fully enclosed to prevent oil spatter 4.0 t Door guard Zero-play lifting carriages with 6 rollers (3 at top, 3 at bottom) with roller bearings Bronze loadbearing nut and large 45 mm diameter steel spindle 11
Wheel Alignment Brake Testers Vehicle Testing 5.5 t VLH 2155 Synchronisation ensured by cable safety control 4.0 t VLH 2140 Oil level externally visible Covers guarantee quiet operation and keep dirt out of the drive system Lowering without power Optional sockets Holder for spacer sleeves 45 lifting carriage: For maximum door clearance for cars with short and long wheelbase (VLH 2140) Zero-play lifting carriages with 6 rollers (3 at top, 3 at bottom) with roller bearings 12
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts VLH 2140 and VLH 2155 Electrohydraulic 2-post lifts: Versatile, top-quality vehicle lifts with no frame Also suitable for lifting small vans up to 4 t or 5.5 t All components reinforced 4-piece, symmetrical lifting arms Low maintenance and wear: High-grade, hardwearing hydraulic system Metal high-pressure pipes throughout No vulnerable loadbearing nuts Further info: Pages 43-45 Automatically activated locking pawls (each post) Door guard Automatic limit switch (roof protection) Included in scope of delivery: 50 and 100 mm spacer sleeves Two maintenance-free, suspended lifting cylinders Variable lowering speeds for exact vehicle positioning 13
Wheel Alignment Brake Testers Vehicle Testing The 4-post alternative for wheel-free lifting 14
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts 4-post VLH 4145 VLH 4145 L VLH 4245 VLH 4245 L VLH 4245 A VLH 4245 LA VLH 4345 VLH 4345 L VLH 4345 A VLH 4345 LA Version L for wheel-free scissor Lift Version A for wheel Alignment 4-post vehicle lifts: The perfect lifting and measurement station. Standard lifts accurate enough for wheel alignment. Beissbarth offer 4-post vehicle lifts: With or without integrated wheel-free scissor lift Three different platform lengths 4.40 m (= VLH 4145) 4.81 m (= VLH 4245) 5.07 m (= VLH 4345) The designations 41 / 42 / 43 refer to the length. 15
Wheel Alignment Brake Testers Vehicle Testing VLH 4345 LA Noise insulation: Hydraulic unit is integrated into fluid reservoir Electrohydraulic 4-post lift: Precision lift for small motor vehicles and vans High-precision mechanical and hydraulic systems Integrated wheel-free scissor lift Ideal work station for wheel alignment Low access height of only 185 mm (including fillers for wheel alignment) Optionally: Additional 2 t or 2.6 t jacking beam Optionally: Play detector High-precision locking bars 3.5 t L = Wheel-free scissor Lift 4.5 t Lifting height up to 450 mm (off-road vehicles) Adjustable fillers of various lengths Protective sheathing for hoses and cables Provided with opening for wheel alignment turntables as standard feature 16
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts A = Alignment Long platform: 5070 mm Post spacing: 2780 mm also for commercial vehicles Standard: Pneumatic release of platforms (locking pawls), automatically controlled Extending wheel-free lift (1400-1900 mm) Platforms: Corrosion-proof Optionally: Mounting for Beissbarth Easy 3D Optionally: Non-slip surface Power Grip XXL sliding plates at rear (with versions A and LA) The turntable can be positioned as required and fillers are placed in the gaps. The covers (at top of illustration on left) are included as standard. Versions: VLH 4245 with medium platforms 4.80 m VLH 4145 with extra-short platforms 4.40 m Further info: Pages 46-47 17
18 Wheel Alignment Brake Testers Vehicle Testing
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts 3D CCD 19
Wheel Alignment Brake Testers Vehicle Testing Short and sweet 20
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts Small scissor lifts VLS 3130 VLS 3132H Short-stroke lift Double scissor lift with full lifting Height Small scissor lifts: Efficient and space-saving. Compact and effective for tyre and rapid repair workshops with a high customer turnover. Beissbarth offer the simple short-stroke lift with mobility kit or the double scissor lift with extra lifting height ( H ). Both of floor-mounted, ultra-shallow design. 21
Wheel Alignment Brake Testers Vehicle Testing VLS 3130 Short-stroke lift: Versatile for working on tyres, Ultra low profile: Minimum height just 100 mm Quick and easy to move Galvanised baseplates Safety: Two cylinders per platform (double crossover hydraulic circuit) Lifting height up to 930 mm Platform length between 1400 and 1932 mm No compressed air Pre-assembled (no additional on-site assembly work) 4 elastomer lifting blocks included in scope of delivery Fluid included Further info: Pages 48-49 22 Foot protection sensor
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts 3.0 t Operating console with hydraulic unit Fold-down access ramps Wear-free sliders Hot-dip galvanised baseplates bodywork and brakes Optional: Mobility kit for easy moving EDP no. 1 692 871 301 23
Wheel Alignment Brake Testers Vehicle Testing VLS 3132 H Double scissor lift: Extra-high also suitable for u Two lifting cylinders on each side Outstanding lifting height of 1945 mm Platform length between 1470 and 1990 mm Ultra low profile: Height of only 105 mm Auxiliary lever for starting assistance Short lifting/lowering time: 45 sec. Hydraulic fluid included 4 elastomer lifting blocks included in scope of delivery Further alternative: Under-floor installation (optional foundation trough) Further info: Pages 48-49 24
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts nderbody work 3.2 t Lockable access ramps Optimised joint lubrication for a long service life H = High 1945 mm in 45 sec. Hot-dip galvanised baseplates Ultra low profile: Height of only 105 mm 25
Wheel Alignment Brake Testers Vehicle Testing The heavyweight class 26
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts Large scissor lifts VLS 5140 L A VLS 5150 L A Version L for wheel-free scissor Lift Version A for wheel Alignment Large scissor lifts: The all-round performers. For customer reception, repairs and wheel alignment. Beissbarth offer the versions with wheel-free scissor lift and prepared for wheel alignment. 27
Wheel Alignment Brake Testers Vehicle Testing 3.5 t 4.0 t VLS 5140 LA Large 4 t scissor lift: Tough enough for wheel alignment. Precision standard for wheel alignment Automatic level control High-grade hydraulic components Light barrier for monitoring operation Operating console with hydraulic unit Optional: Non slip surface Power Grip Optional: Mounting for Beissbarth Easy 3D 28
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts Sliding plates Hot-dip galvanised access ramps Platform length of 4.80 m for extremely long vehicles Lifting time of only 35 sec. with standard 5.5 kw motor Low drive-over heights (160 to 210 mm) Little maintenance required Sturdy design with overall weight of 1500 to 2200 kg Surface or under-floor installation Further info: Pages 50-51 L = Wheel-free scissor Lift A = Alignment Extremely shallow design Low access height 29
Wheel Alignment Brake Testers Vehicle Testing The perfect lifting an Beissbarth For quick service, vehicle ins CCD 30
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts d measurement station. scissor lifts: pection, customer reception. 3D 31
Wheel Alignment Brake Testers Vehicle Testing VLS 5150 L Large 5 t scissor lift: Robust, flexible and ideal for customer reception. For precision customer reception work 5.2 m platform length for long vehicles 710 mm platform width for commercial vehicles Integrated wheel-free scissor lift with extendable platform 5.5 kw motor, lifting time 40 sec. Optional: Play detector set Platform corrosion protection Hot-dip galvanised baseplates and ramps Further info: Pages 50-51 Optional: Non slip surface Power Grip 5.0 t 3.5 t Safety sensors Optional: 2 t or 2.6 t jacking beam 32
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts Optional: 4 armoured glass neon lights Operating console with hydraulic unit L = Wheel-free scissor Lift Hot-dip galvanised baseplates and ramps Under-floor as standard, surface installation accessories on request. 33
Wheel Alignment Brake Testers Vehicle Testing For quick service, vehicle inspection and Beissbarth scissor lifts: Optionally with play detector and lighting 34
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts customer reception. 35
Wheel Alignment Brake Testers Vehicle Testing Model Overview 36
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts 2-post Compact vehicles Passenger cars SUV Sports cars Small vans Large vans VLE 2130 E VLE 2130 F VLE 2130 EL VLE 2140 EL VLH 2140 VLH 2455 4-post VLH 4145 VLH 4245 VLH 4345 Small scissors VLS 3130 VLS 3132 H Large scissors VLS 5140 VLS 5150 37
Wheel Alignment Brake Testers Vehicle Testing Technical appendix 38
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts Contents Page VLE 2130 + 2140... 40-42 VLH 2140 + VLH 2155... 43-45 VLH 4145 + VLH 4245 +VLH 4345... 46-47 VLS 3130 + VLS 3132... 48-49 VLS 5140 + VLS 5150... 50-51 39
VLE 2130 and 2140 VLE 2130 VLE 2130 E Auffahrrichtung Drive-on direction Auffahrrichtung Drive-on direction 40
Wheel Alignment Brake Testers Vehicle Testing Tyre Changers VLE 2130 EL VLE 2140 EL Auffahrrichtung Drive-on direction Auffahrrichtung Drive-on direction 41
Wheel Balancers AC Service Units Lifts Networking Lifts Technical data VLE 2130 / VLE 2130F VLE 2130E VLE 2130EL VLE 2140EL Art. no. 1 692 822 302 1 692 822 305 1 692 822 308 1 692 822 402 / 1 692 822 312 Loadbearing capacity 3 t 3 t 3 t 4 t Drive motor 1 x 3 kw 2 x 2.5 kw 2 x 3 kw 2 x 3 kw Motor overload protection Self-lubricating lifting spindle Operating unit Pushbuttons Reversing switch Pushbuttons Pushbuttons Lifting arms 3-piece at front 2-piece 3-piece at front 4-piece 2-piece at rear 2-piece at rear Loadbearing nut material Special bronze Plastic Special bronze Special bronze Lifting carriage guide 6 rollers 4 rollers 6 rollers 6 rollers Height not including cable gantry 2565 mm / 2615 mm 2550 mm 2550 mm 2560 mm Exterior width 3160 mm / 3000 mm 3315 mm 3200 mm 3300 mm Drive-through width 2230 mm 2350 mm 2290 mm 2390 mm Inner post spacing 2630 mm 2650 mm 2630 mm 2730 mm Length of lifting arms at front 430-880 mm 560-760 mm 420-830 mm 660-1680 mm Length of lifting arms at rear 830-1330 mm 830-1330 mm 840-1340 mm 660-1680 mm Pad height 85 mm / 100 mm 85 mm 85 mm 85 mm Max. adjustment height of lifting saddles 30 mm 30 mm 30 mm 30 mm Lifting saddle diameter 130 mm 130 mm 130 mm 130 mm Max. lifting height 2005 mm 2005 mm 2005 mm 2005 mm Height of chain guard 34 mm / 50 mm Lifting time 45 sec. 50 sec. 45 sec. 45 sec. Minimum concrete thickness 140 mm (F only) 210 mm 210 mm 210 mm Grade C20 / 25 Grade C20 / 25 Grade C20 / 25 Grade C20 / 25 Power supply 400 V / 50Hz 400 V / 50Hz 400 V / 50Hz 400 V / 50Hz 3ph / 16 A / E+N 3ph / 16 A / E+N 3ph / 16 A / E+N 3ph / 16 A / E+N CE certification Net weight 600 kg / 680 kg 550 kg 650 kg 750 kg Lifting arm locking Automatic, via Automatic, via Automatic, via Automatic, via screw thread gear wheels screw thread screw thread Special accessories Art. description Article number VLE 2130 VLE 2130F VLE 2130E VLE 2130EL VLE 2140EL Spindle oil 1 692 871 003 Set of spacer sleeves 35 mm 1 692 872 142 Set of spacer collars 90 mm 1 692 872 143 Set of spacer sleeves 180 mm 1 692 872 144 Spacer sleeve holder (set) 1 692 872 145 100 mm mount, turntable 1 692 872 146 Auxiliary mount set for off-road vehicles 1 692 872 147 Storage tray set (4x) 1 692 872 148 Manual release mechanism 1 692 872 149 Ceiling cut-out, light barrier 1 692 872 152 Lashing straps for assembly removal 1 692 872 154 42 42
VLH 2140 and VLH 2155 VLH 2140 VLH 2155 Auffahrrichtung Drive-on direction Special accessories VLH 2140 VLH 2155 Standard Long Standard Long Art. description Article number lifting arms lifting arms Set +300 mm lifting arm extensions (4x) 1 692 871 402 Set +300 mm lifting arm extensions (4x) 1 692 871 523 Set of 2 long lifting arms 930-1480 mm 1 692 871 403 Set of spacer sleeves +150 mm (4x) 1 692 871 497 Set of spacer sleeves +250 mm (4x) 1 692 871 498 Set of lifting saddles with raised edges (4x) 1 692 871 526 Electrics box with 2 230 V connectors 1 692 871 527 Hydraulic fluid, 5 litres 1 692 872 372 Fastening materials M16 1 692 872 158 Lashing straps for assembly removal 1 692 872 154 43 43
Wheel Alignment Brake Testers Vehicle Testing Type VLH 2140 VLH 2140 VLH 2140 VLH 2140 VLH 2140 Electro-hydraulic drive Loadbearing capacity 4 t 4 t 4 t 4 t 4 t Cable gantry Drive motor 2.2 kw 2.2 kw 2.2 kw 2.2 kw 2.2 kw Motor overload protection Operating unit Lever Lever Lever Lever Lever Maintenance-free hydraulic cylinders, qty. 2 2 2 2 2 Synchronization control by way of 2 cables Safety locking: Mechanical locking pawl in each post, automatically actuated Hydraulic fluid*, fill 8 l 8 l 8 l 8 l 8 l Overall height (Hg) 3670 mm 4000 mm 4200 mm 4400 mm 4650 mm Cut-out height (Hl) 3550 mm 3880 mm 4080 mm 4280 mm 4530 mm Exterior width (Bg) 3035 mm 3035 mm 3035 mm 3035 mm 3035 mm Drive-through width (Bh) 2240 mm 2240 mm 2240 mm 2240 mm 2240 mm Post spacing, inner (Bl) 2565 mm 2565 mm 2565 mm 2565 mm 2565 mm Max. lifting height (Ho) 1851 mm 1851 mm 1851 mm 1851 mm 1851 mm Lifting time 32 sec. 32 sec. 32 sec. 32 sec. 32 sec. Minimum concrete thickness 210 mm 210 mm 210 mm 210 mm 210 mm Grade C20/25 Grade C20/25 Grade C20/25 Grade C20/25 Grade C20/25 Power supply 400V/50 Hz 400V/50 Hz 400V/50 Hz 400V/50 Hz 400V/50 Hz 3ph/16A/E+N 3ph/16A/E+N 3ph/16A/E+N 3ph/16A/E+N 3ph/16A/E+N CE certification Net weight 610 kg 616 kg 622 kg 632 kg 638 kg Lifting arm locking Automatic Automatic Automatic Automatic Automatic VLH 2140 with standard telescopic lifting arms Vehicle lift order no. 1 692 821 442 1 692 821 415 1 692 821 416 1 692 821 417 1 692 821 418 Lifting arms 2-piece 2-piece 2-piece 2-piece 2-piece Length of lifting arms, at front Min./max. (Lk) 570-890 mm 570-890 mm 570-890 mm 570-890 mm 570-890 mm Length of lifting arms, at rear Min./max. (Ll) 930-1480 mm 930-1480 mm 930-1480 mm 930-1480 mm 930-1480 mm Pad height (Hu) Min./max. 100 / 135 mm 100 / 135 mm 100 / 135 mm 100 / 135 mm 100 / 135 mm Turntable, diameter 120 mm 120 mm 120 mm 120 mm 120 mm VLH 2140 with long telescopic lifting arms Vehicle lift order no. 1 692 821 445 1 692 821 425 1 692 821 426 1 692 821 427 1 692 821 428 Lifting arms 3-piece 3-piece 3-piece 3-piece 3-piece Length of lifting arms, at front Min./max. (Lk) 726-1447 mm 726-1447 mm 726-1447 mm 726-1447 mm 726-1447 mm Length of lifting arms, at rear Min./max. (Ll) 726-1447 mm 726-1447 mm 726-1447 mm 726-1447 mm 726-1447 mm Pad height (Hu) Min./max. 100 / 135 mm 100 / 135 mm 100 / 135 mm 100 / 135 mm 100 / 135 mm Turntable, diameter 120 mm 120 mm 120 mm 120 mm 120 mm * Type ISO 32, not included in scope of delivery 44
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts Type VLH 2155 VLH 2155 VLH 2155 VLH 2155 Electro-hydraulic drive Loadbearing capacity 5.5 t 5.5 t 5.5 t 5.5 t Cable gantry Drive motor 3 kw 3 kw 3 kw 3 kw Motor overload protection Operating unit Lever Lever Lever Lever Maintenance-free hydraulic cylinders, qty. 2 2 2 2 Synchronization control by way of 2 cables Safety locking: Mechanical locking pawl in each post, automatically actuated Hydraulic fluid*, fill 8 l 8 l 8 l 8 l Overall height (Hg) 4000 mm 4300 mm 4600 mm 4900 mm Cut-out height (Hl) 3857 mm 4157 mm 4457 mm 4757 mm Exterior width (Bg) 3600 mm 3600 mm 3600 mm 3600 mm Drive-through width (Bh) 2765 mm 2765 mm 2765 mm 2765 mm Post spacing, inner (Bl) 3000 mm 3000 mm 3000 mm 3000 mm Max. lifting height (Ho) 1985 mm 1985 mm 1985 mm 1985 mm Lifting time 36 sec. 36 sec. 36 sec. 36 sec. Minimum concrete thickness 230 mm 230 mm 230 mm 230 mm Grade C20/25 Grade C20/25 Grade C20/25 Grade C20/25 Power supply 400V/50 Hz 400V/50 Hz 400V/50 Hz 400V/50 Hz 3ph/16A/E+N 3ph/16A/E+N 3ph/16A/E+N 3ph/16A/E+N CE certification Net weight 816 kg 831 kg 841 kg 861 kg Lifting arm locking Automatic Automatic Automatic Automatic VLH 2155 with standard, symmetrical telescopic lifting arms Vehicle lift order no. 1 692 821 515 1 692 821 516 1 692 821 517 1 692 821 518 Lifting arms 3-piece 3-piece 3-piece 3-piece Length of lifting arms, at front Min./max. (Ll) 700-1421 mm 700-1421 mm 700-1421 mm 700-1421 mm Length of lifting arms, at rear Min./max. (Ll) 700-1421 mm 700-1421 mm 700-1421 mm 700-1421 mm Pad height (Hu) Min./max. 135 / 169 mm 135 / 169 mm 135 / 169 mm 135 / 169 mm Turntable, diameter 120 mm 120 mm 120 mm 120 mm VLH 2155 with long symmetrical telescopic lifting arms Vehicle lift order no. 1 692 821 525 1 692 821 526 1 692 821 527 1 692 821 528 Lifting arms 3-piece 3-piece 3-piece 3-piece Length of lifting arms, at front Min./max. (Ll) 900-2000 mm 900-2000 mm 900-2000 mm 900-2000 mm Length of lifting arms, at rear Min./max. (Ll) 900-2000 mm 900-2000 mm 900-2000 mm 900-2000 mm Pad height (Hu) Min./max. 156 / 190 mm 156 / 190 mm 156 / 190 mm 156 / 190 mm Turntable, diameter 120 mm 120 mm 120 mm 120 mm * Type ISO 32, not included in scope of delivery 45
Wheel Alignment Brake Testers Vehicle Testing VLH 4145, VLH 4245 and VLH 4345 G J F K L C C A E H I B D Vehicle lift type Dimensions in mm A B C D E F G H I J K L VLH 4145 3220 4570 280 5560 2780 4440 2300 980 500 VLH 4145L 3220 4570 280 5560 2780 4440 2300 980 500 450 1400 620 1190 1190 1900 VLH 4245 3220 4940 280 5930 2780 4810 2300 980 500 VLH 4245A 1190 VLH 4245L 3220 4960 280 5930 2780 4810 2300 980 500 450 1400 620 VLH 4245LA 1190 1900 VLH 4345 3220 5200 280 6190 2780 5070 2300 850 630 VLH 4345A 1070 VLH 4345L 3220 5200 280 6190 2780 5070 2300 850 630 450 1400 665 VLH 4345LA 1070 1900 46
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts Technical data VLH 4145 VLH 4245 VLH 4345 Loadbearing capacity 4.5 t 4.5 t 4.5 t Min. height 135 mm 135 mm 135 mm 185 mm (A + LA models) 185 mm (A + LA models) Max. lifting height 1850 mm 1850 mm 1850 mm Platform length 4400 mm 4810 mm 5070 mm Platform width 500 mm 500 mm 630 mm Drive-through width 2780 mm 2780 mm 2780 mm Lifting time 35 sec. 35 sec. 35 sec. Dimensions 5570 x 3220 x 2510 mm 5930 x 3220 x 2510 mm 6190 x 3220 x 2510 mm Power and air supply 400 V / 3 ph / 50 Hz / 400 V / 3 ph / 50 Hz / 400 V / 3 ph / 50 Hz / E+N / 16 A E+N / 16 A E+N / 16 A Motor 3.0 kw 3.0 kw 3.0 kw Max. fluid pressure 190 bar 190 bar 190 bar Compressed air 8-10 bar 8-10 bar 8-10 bar Minimum concrete thickness 150 mm Grade C20 / 25 150 mm Grade C20 / 25 150 mm Grade C20 / 25 Secondary lift ("L" versions) loadbearing capacity 3.5 t 3.5 t 3.5 t Max. height 450 mm 450 mm 450 mm Platform length 1400/1900 mm 1400/1900 mm 1400/1900 mm Lifting time 15 sec. 15 sec. 15 sec. Wheel alignment equipment ("A" versions) Recesses at front for turntables Sliding plates at rear Net weight 1000 kg 1200 kg 1400 kg "L versions 1200 kg 1400 kg 1600 kg "A versions 1600 kg 1800 kg "LA versions 1800 kg 2000 kg CE certification Art. no.: VLH 4145 1 692 841 412 VLH 4145L 1 692 841 442 VLH 4245 1 692 841 452 VLH 4245L 1 692 841 462 VLH 4245A 1 692 841 472 VLH 4245LA 1 692 841 482 VLH 4345 1 692 841 512 VLH 4345L 1 692 841 522 VLH 4345A 1 692 841 532 VLH 4345LA 1 692 841 502 Special accessories Easy 3D adapter for 4-post vehicle lifts. Art. no. 1 692 872 249 Lighting kit (4 neon tubes) for all models. Art. no. 1 692 872 356 Play detector set, suitable for all models. Art. no. 1 692 872 378 Jacking beam 2 t / 2.6 t, suitable for all models. Art. no. 1 692 872 384 Art. no. 1 692 872 385 Hydraulic fluid (5 litres). Art. no. 1 692 872 372 Compressed air service unit complete (0-10 bar). Art. no. 1 692 872 365 Connectors, 1 set. Art. no. 1 692 872 370 47
Wheel Alignment Brake Testers Vehicle Testing VLS 3130 and VLS 3132 H VLS 3130 VLS 3132 H Special accessories Art. description Art. no. VLS 3130 VLS 3132H Mobility set 1 692 871 301 Hose extension per metre 1 692 871 012 Fastening materials 1 692 871 013 Biodegradeable fluid (5 litres) 1 692 872 372 Foundation trough 1 692 871 014 Elastomer blocks 250 x 150 x 20 1 692 872 361 Elastomer blocks 250 x 150 x 60 1 692 872 362 Elastomer blocks 250 x 150 x 90 1 692 872 363 48
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts Art. no. Basic version VLS 3130 VLS 3132H Elevated 1 692 852 302 1 692 852 322 Under-floor With integrated wheel-free scissor lift "L" Elevated Under-floor With wheel alignment equipment "A" Elevated Under-floor With "L and "A Elevated Under-floor Technical data Type Short-stroke lift Double scissor lift Drive Electrohydraulic Electrohydraulic Loadbearing capacity 3 t 3.2 t Drive motor 1.1 kw 3.0 kw Lifting height 930 mm 1945 mm Platform length 1400-1932 mm 1470-1990 mm Platform width 450 mm 580 mm Lifting time 30 sec. 45 sec. Mobile/stationary M / S S Minimum height 100 mm 105 mm Hydraulic synchronization safety system Double cylinder in each scissor mechanism Elastomer blocks included in scope of delivery Secondary lift loadbearing capacity Secondary lift lifting height Secondary lift platform length Secondary lift platform width Fluid pressure 330 bar 240 bar Minimum concrete thickness 210 mm Grade C20 / 25 210 mm Grade C20 / 25 Power supply 400 V / 3 PH / 50 Hz / 400 V / 3 PH / 50 Hz / 16 A / E+N 16 A / E+N Compressed air supply Fluid quantity 10 l 10 l CE certification Net weight 450 kg 800 kg 49
Wheel Alignment Brake Testers Vehicle Testing VLS 5140 and VLS 5150 VLS 5140 VLS 5150 Caution: if a play detector is installed on the lift, then the platforms are longer. Long wheel bases are welcome. Special accessories Easy 3D adapter for scissor lifts. Art. no. 1 692 872 250 Lighting kit (4 neon tubes) for VLS 5140. Art. no. 1 692 871 050 Play detector set, suitable for both models. Art. no. 1 692 872 378 Jacking beam 2 t or 2.6 t, suitable for all models. Art. no. 1 692 872 384 Art. no. 1 692 872 385 Hydraulic fluid (5 litres). Art. no. 1 692 872 372 Compressed air service unit complete (0-10 bar). Art. no. 1 692 872 365 50
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts Art. no. Basic version VLS 5140 VLS 5150* Elevated 1 692 852 402 Under-floor 1 692 851 402 1 692 851 502 With integrated wheel-free scissor lift "L" VLS 5140L VLS 5150L Elevated 1 692 852 408 Under-floor 1 692 851 408 1 692 851 508 With wheel alignment equipment "A" VLS 5140A VLS 5150A Elevated 1 692 852 412 Under-floor 1 692 851 412 1 692 851 512 With "L and "A VLS 5140LA VLS 5150LA Elevated 1 692 852 418 Under-floor 1 692 851 418 1 692 851 518 Technical data Type Scissor lift Scissor lift Drive Electrohydraulic Electrohydraulic Loadbearing capacity 4 t 5 t Drive motor 5.5 kw 5.5 kw Lifting height 1870 mm 2150 mm Platform length 4800 mm 5200 mm Platform width 705 mm 710 mm Lifting time 35 sec. 40 sec. Mobile/stationary S S Minimum height 160 / 210 mm 350 / 420 mm Hydraulic synchronization safety system Double cylinder in each scissor mechanism Elastomer blocks included in scope of delivery "L" and "LA" "L" and "LA" Secondary lift loadbearing capacity 3.5t 3.5t Secondary lift lifting height 450 mm 400 mm Secondary lift platform length 1400 mm 1450 mm Secondary lift platform width 705 mm 510 mm Fluid pressure 330 bar 240 bar Minimum concrete thickness 210 mm Grade C20 / 25 210 mm Grade C20 / 25 Power supply 400V / 3 PH / 50 Hz / 400V / 3 PH / 50 Hz / 20 A / E+N 20 A / E+N Compressed air supply 8-10 bar 8-10 bar Fluid quantity 15 l 15 l CE certification Net weight 1500-2200 kg 1500-2200 kg *in preparation 51
Wheel Alignment Brake Testers Vehicle Testing Workshop equipme Precision for I Wheel Alignment Vehicle Testing Wheel Balancers Tyre Changers AC Service Units 52
Tyre Changers Wheel Balancers AC Service Units Lifts Networking Lifts nt from Beissbarth: AM and OEM 53
Beissbarth Service worldwide Service from Beissbarth Munich: Immediate telephone support Rapid replacement parts deliveries Individual maintenance contracts Factory customer service: Beissbarth and certified partner companies provide on-site assistance with installation, instruction, equipment assembly and maintenance with partners in more than 90 countries around the world. Training Centre: Instruction and training at STC of Robert Bosch GmbH, 73207 Plochingen Software Centre: Technical documentation, specified vehicle data and marketing material for immediate download: www.beissbarth.com Subject to technical modification and changes to scope of delivery. Pictures may sometimes show special accessories or similar versions. Please contact your Beissbarth dealer for a binding up-todate quotation. Beissbarth GmbH A Bosch Group Company Hanauer Strasse 101 80993 Muenchen (Munich, Bavaria) Germany Tel. +49-89-149 01-0 Fax +49-89-149 01-240 www.beissbarth.com sales@beissbarth.com B/Drucknorm 178/09.2012-1 692 826 062 EN