Injects ionized air over an angle of 60 or 90. Straight Bar Nozzle

Similar documents
High-frequency AC Method. panasonic-electric-works.net/sunx. A new style of charge removal New ultra-compact, high-performance ionizer!

How to Order BS B. Nil. Bracket (End bracket, Center bracket) Nil

Static Electricity Removing Unit Ionizer Blow Type

Ionizer (Nozzle type) Series IZN10

Blow Type Application Examples

High-frequency AC Method. panasonic-electric-works.net/sunx

ER-VSERIES. A new style of charge removal. New ultra-compact, high-performance ionizer! ULTRA-COMPACT IONIZER High-frequency AC Method

Ionizer. Discharge time: 0.3 seconds. Series IZS31. Ion balance control by an autobalance sensor CAT.EUS100-68A-UK. Without sensor.

Model Pressure range ON/OFF output Linear output

Series IZS31. RoHS compliant

New ultra-compact, high-performance ionizer!

16mm. Ionizer Nozzle type. IZN10 Series. Offset voltage ±10 v Slim design: Thickness dimension 16 mm RoHS compliant

Ready for outdoor use too!

Compressed Air Cleaning Filter Series

Compressed Air Cleaning Filter Series

Check Valve Series AK How to Order

Compressed Air Cleaning Filter Series

W1000/W3000/W4000/W8000 Series

Differential Pressure Sensor

Static Electricity Removal Unit Ionizer Ion Polarity Control Type

Digital display Pressure range ON/OFF output Linear output Model

Model Pressure range ON/OFF output Linear output

Model Number Structure

ION JET NOZZLE NIH-55

Vacuum / Release Unit

Nozzle Type Ionizer. 16 mm x 100 mm x 46 mm 33% reduction. IZN10E Series CAT.ES A

MULTISTAGE MICRO EJECTORS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution

Compact Proportional Solenoid Valve

Electro-Pneumatic Regulator/Electronic Vacuum Regulator

Vacuum pump system type

Inductive Proximity Sensor

Compressed Air Cleaning Filter Series

Inductive Proximity Sensor

Added 100 mm and 150 mm lengths. Actuators 10% Air leakage 20% Air blow 70% Current model

Operating instructions Accu Jet

Transistor Remote Modules

Power Controller. (see note 1) 10 sec

L1000/L3000/L4000/L8000-W Series

VSG Series Features Descriptions VSG VSG VSG Descriptions Supply valve Descriptions Vacuum filter

ER100 Series OUT. Specifications. Working fluid Working pressure range Control pressure range. Input voltage 2 wire Input impedance.

13 msec (at 500 mm )/18.5 msec (at 1000 mm )

TL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information

Miniature Regulator Series ARJ310

Ordering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays

Related vacuum products

1. Preface For best results, please refer to this manual before using this product. 2. Safety precautions Model Precautions DFS-1 The maximum pressure

20 amps 220 amps, 60 Hz VDC VAC G3PA-420B-VD-2 DC amps 440 amps, 60 Hz G3PA-450B-VD-2 DC12-24

Type Plunger Switch height Operating force Model Without ground terminal With ground terminal. 5.0 mm General-purpose: 100 g 150 g

Doc. No. IZ -OML0002-B OPERATION MANUAL. Ionizer PRODUCT NAME:

Proximity Sensor. Shield Size Sensing distance Output configuration Models Shielded M12 3 mm NO E2EQ-X3D1 E2EQ-X7D1 M30 10 mm E2EQ-X10D1

Ordering Information. Text Surface-Mounting Signal Relay G6K

Clean Air Module. Digital flow switch Regulator ON/OFF valve Restrictor Filter

4 Note 1) Value for communications type. (PROFIBUS DP)

Basic Switch Style Inductive Prox TL-M. Ordering Information. General-purpose Inductive Prox in a Basic Switch Housing

Anti-spatter Inductive Prox E2EQ. Ordering Information. Weld-Sputter Resistant DC 2-Wire Cylindrical Sensors. H Rugged fluoroplastic coated brass

MULTISTAGE MICRO EJECTORS

Insulation method Zero-cross function Indicators Applicable output load Model number Phototriac coupler Yes Yes (See page 6) Main Circuit

High-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.

Free position locking flat and compact cylinder UFCD Series

* E8MS-N1 is only 1-channel pressure sensor controller. E80-C2 can be used. For more details, please refer to E80 catalogue.

HF2 Gauge Installation Guide Scantech

Ordering Information. Long Barrel Inductive Prox. E2E2 2-Wire DC. Reduce Wiring to Control Devices with 2-Wire Inductive Prox Sensors

Compact Vacuum Ejector

Piping labor reduced A flexible system has been adopted. E-P HYREG. Cylinder behavior and pressurization control. Example

Intermittent control timer

Micro Mist Separator. Model. Note) 1 8, , , , , 1. Model/Free Standing Type. Model AMD (2B)JIS 10K FF flange

Pressure Drop (Reference (typical)) 0.19 kpa 0.48 kpa Operating Temperature

PCB Relay. 2. Contact Form 2: DPDT 3. Terminal Shape None: PCB terminal F: Surface mount terminal

Mounting type Contact form PCB terminals Screw terminals Quick-connect terminals

Standard Specifications. Model. Port (Bypass lubrication adapter)

Static Electricity Prevention Equipment

Model Number Structure. Power Controllers G3PX. Single-phase Models. Model Number Legend

Clean Sensing System ZN Series. Advanced Clean-Monitoring for the Manufacturing Field

Electrostatic Fieldmeter

Operation angle Return angle Output rating Operating voltage Model 40 to to VDC 2.4 to 3.6 VDC D6BN-1P

How to Order ITV N. Nil. EXHc. Base type. Nil. ø1/4"

Pressure Control Equipment

JDV ATTACHMENT SOLENOID VALVE LIMIT SWITCH FILTER REGULATOR

Standard Specifications. Model. Port (Bypass lubrication adapter)

E2EZ-X2D1-N E2EZ-X2D2-N

Model Number Structure

Emergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm

SUB-LINE FILTERS CONTENTS

PCB Relay RC FCC. Ordering Information. Fully Sealed Relay with High Impulse Dielectric for Use in Telecommunications Equipment

Electronic Ignition Module

PCB Relay. Ordering Information. Compact, Low-cost 30-A Power Relay for PC Board or Panel-mounted Applications G8P - - VDC

panasonic.net/id/pidsx/global Solve issues related to machine safety and other safety measures with a safety door switch with key!

Pneumatic components (Electro pneumatic Regulator) Safety Precautions. 3 When releasing secondary control pressure,

JDV ATTACHMENT SOLENOID VALVE LIMIT SWITCH FILTER REGULATOR

Electro-Pneumatic Regulator Electronic Vacuum Regulator

Electro-Pneumatic Regulators. Electronic Vacuum Regulators

Electro-Pneumatic Regulators. Electronic Vacuum Regulators

Compact direct acting precision regulator

Electro-Pneumatic Regulators. Electronic Vacuum Regulators

G6K. Surface Mounting Relay with the World s Smallest Mounting Area. Application Examples. Model Number Legend. Ordering Information

Standard Specifications. Model IN side OUT side Fluid Proof pressure Maximum operating pressure

Super-Mini Complete with Easy-to-Use Functions. Guided Cylinder. STM Series GUIDED CYLINDER STM SERIES CC-884A 1

Series ITV0000. Compact Electro-pneumatic Regulator ITV N. IITV00 02 n. How to Order F.R.L. AV AU AF AR IR VEX AMR ITV IC VBA VE VY1 G PPA AL

0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h)

R1000/R3000/R4000/R8000 Series

Transcription:

Ionizer (Air Push Type) KS Wide Range of Nozzles for Optimal Ionization From pin-point to wide-area ionization, the optimal ionization for the application is now possible. High-frequency AC method with excellent ion balance. Be sure to read Safety Precautions on page 8. Features Select the Nozzle for the Application Standard Nozzle Shower Nozzle Flat Nozzle An application example of the basic standard nozzle. Injects ionized air over an angle of 6 or 9. Injects ionized air over an angle of 9 to enable ionization of comparatively wide objects. Cleaning / 6 or 9 Combination of Standard Nozzle and Optional Tube Attach the Optional Tube to the Standard Nozzle to blow ionized air close to the workpiece for pin-point ionization. Straight Bar Nozzle Neutralizes static electricity over a wide area. Five ionization areas from to mm. Efficient Pin-point Ionization High-speed ionization of the target spot is possible by using a tube or metal pipe to get closer to the workpiece. The Ionizer can be brought as close as mm to the workpiece. High-frequency AC Method with Excellent Ion Balance ZJ-FA // ZJ-FA Uses more compact high-frequency AC method with excellent ion balance and stability. KS Approx.㧗kV V Approx.㧙kV 68kHz Combination of Flexible Tube Nozzle and Optional Cap Combine the nozzle cap at the tip of the nozzle to enable many ionization applications. 6 or 9 Only the -VDC power supply for the Ionizer is needed. No dangerous high-voltage wiring is required. Compact Type with Built-in Controller Controller section built in. Simple all-in-one Unit that installs easily just about anywhere. The Ionizer oscillates at a much higher frequency (68 khz) than the previous AC method to generate high-density ions. Noise generation is also reduced by a ±kv low-voltage corona discharge. Safe because the high voltage parts are covered by the nozzle. 8 With a flexible shower nozzle cap -VDC Power Supply with No High-voltage Wiring Required With standard nozzle Driven by -VDC power supply with no high-voltage wiring required. 9

KS Product Configuration Nozzles Ionizer Tubes For Standard Nozzle KS-ANNS-@ Caps For Flexible Tube Nozzle Shower Nozzle Cap KS-ANDC-SW@@ Flat Nozzle Cap KS-ANDC-FT9 Standard Nozzle KS-ANNS Shower Nozzle KS-ANSW@@ Flat Nozzle KS-ANFT9 Straight Bar Nozzle KS-ANSB@@ Flexible Tube Nozzle KS-ANDC@@ KS-AAT Filter and Connector Air Clean Filter KS-AZ Stainless Steel Connector (See note.) KS-AZ Note: The Connector can be mounted to the Ionizer even with no Air Clean Filter. Ordering Information Ionizer KS-AAT Accessories Nozzles Product Standard Nozzle KS-ANNS Shower Nozzle 6 KS-ANSW6 9 KS-ANSW9 9 Flat Nozzle KS-ANFT9 Straight Bar Nozzle mm KS-ANSB mm KS-ANSB mm KS-ANSB mm KS-ANSB mm KS-ANSB Tubes Product -mm Conductive Urethane Tube KS-ANNS-U -mm Fluororesin Tube KS-ANNS-F -mm Silicone Tube KS-ANNS-S Caps Product 6 Flexible Shower Nozzle Cap KS-ANDC-SW6 9 Flexible Shower Nozzle Cap KS-ANDC-SW9 9 Flexible Flat Nozzle Cap KS-ANDC-FT9 Cleaning / mm KS-ANDC Optional Products Flexible Tube Nozzle mm KS-ANDC mm KS-ANDC mm KS-ANDC mm KS-ANDC Product Replacement Dischargers (set of ) Tool for Replacing Dischargers Stainless Steel Connector Air Clean Filter KS-AZT KS-AZ KS-AZ KS-AZ ZJ-FA // ZJ-FA KS 8

KS Ratings and Specifications Cleaning / Ionizer Item KS-AAT Power supply voltage VDC ±% Current consumption Discharge method Output voltage Safety circuit Discharge time Ion balance Fluid used Amount of generated ozone Supplied airflow Indicators Air pressure range Ambient temperature Ambient humidity Weight Approx. ma High-frequency AC (approx. 68 khz) ±kv Output alarms for ionization errors.8 s max. (at a distance of mm from air outlet) ±V or less (at a distance of mm from air outlet) Air (refer to Applicable Air). ppm or less (when standard nozzle used, at a distance of mm from air outlet and primary side voltage of. Mpa) Approx. L/min (ANR) (when standard nozzle used, at primary side voltage of. Mpa) Green POWER indicator lit while Ionizer ON, red ALM indicator lit for ionizing errors When Standard Nozzle or Flexible Tube Nozzle is used:. to. MPa When Standard Nozzle Tube is attached:. to. MPa When Shower Nozzle, Flat Nozzle, or Straight Bar Nozzle is used:. to. MPa to C (with no condensation or icing) % to 6% (with no condensation) Approx. g (Ionizer only) Accessories One ground lead ( m) Air Clean Filter ZJ-FA // ZJ-FA Item KS-AZ Fluid used Air Connection aperture R(Rc)/8 Collected particle size. µm Collection efficiency 99.9% Volume of air processed l/min (ANR) * Film area 9.9cm² Maximum voltage used.9 MPa Withstanding pressure. MPa Operating temperature range to C Weight g Recommended tightening torque to 6 N cm Unit material Aluminum alloy (alumite treated) Element material Porous, hollow thread membrane * At. MPa (pressure drop of. MPa) KS 8

Discharge Characteristics (Typical) KS Standard Nozzle 6 C Shower Nozzle 9 C Shower Nozzle KS-ANNS KS-ANSW6 KS-ANSW9.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure Flat Nozzle -mm Straight Bar Nozzle -mm Straight Bar Nozzle KS-ANFT9 KS-ANSB KS-ANSB.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure Cleaning / -mm Straight Bar Nozzle -mm Straight Bar Nozzle -mm Straight Bar Nozzle KS-ANSB KS-ANSB KS-ANSB.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure.MPa Pressure ZJ-FA // ZJ-FA KS 8

KS Flexible Tube Nozzle Standard Nozzle with Conductive Standard Nozzle with Fluororesin Urethane Tube Tube KS-ANDC@ KS-ANNS-U@ Connected to KS-ANNS KS-ANNS-F@ Connected to KS-ANNS Tube length: mm Tube length: mm Tube length: mm Tube length: mm Tube length: mm.mpa Pressure Tube length: mm Tube length: mm Tube length: mm Tube length: mm Tube length: mm.mpa Pressure Tube length: mm Tube length: mm Tube length: mm Tube length: mm Tube length: mm.mpa Pressure Cleaning / Standard Nozzle with Silicon Tube Flexible Tube and 6 Shower Nozzle Flexible Tube and 9 Shower Cap Nozzle Tube KS-ANNS-S@ Connected to KS-ANNS KS-ANDC-SW6 Connected to KS-ANDC@ KS-ANDC-SW9 Connected to KS-ANDC@ Tube length: mm Tube length: mm Tube length: mm Tube length: mm Tube length: mm.mpa Pressure Tube length: mm Tube length: mm Tube length: mm Tube length: mm Tube length: mm.mpa Pressure Tube length: mm Tube length: mm Tube length: mm Tube length: mm Tube length: mm.mpa Pressure Flexible Tube and Flat Nozzle Cap KS-ANDC-FT9 Connected to KS-ANDC@ Tube length: mm Tube length: mm Tube length: mm Tube length: mm Tube length: mm.mpa Pressure ZJ-FA // ZJ-FA KS 86

Connection Diagrams KS Wiring Diagram Terminal Block Diagram Power supply VDC Ground -VDC input power supply Ground (power supply and output) Output terminal Alarm output LOAD ma max. VDC max. Note: Alarm outputs are NC. Safety Precautions Refer to Warranty and Limitations of Liability on page F-. WARNING Precautions for Correct Use This product is not designed or rated for Do not use the product in atmospheres or environments that ensuring safety of persons. Do not use it for exceed product ratings. such purpose. Dimensions Ionizer (Unit: mm) Cleaning / KS dia. 9 8 R6 9 -. dia. 6 dia. G /8 G /8 R /8 Plug R /8 Plug 6 6.6 ZJ-FA // ZJ-FA KS 8

KS Nozzles and Optional Products Used with the Ionizer Nozzles Standard Nozzle KS-ANNS (M ). dia. (ion air outlet) 6 Shower Nozzle KS-ANSW6 (M ) 6 6 9 Shower Nozzle KS-ANSW9 (M ) 6 6 dia. (See note.) (). dia. (Double walled) dia. () Seven, dia. (ion air outlet) (.) (Double walled) dia. 8 () Seven, dia. (ion air outlet) (.) (Double walled) Straight Bar Nozzles KS-ANSB@ Flat Nozzle KS-ANFT9 Cleaning / dia. (M ) (8.) Double-wall thickness: Double-wall thickness: (nut) 6 dia. (B) A Pitch N,. dia. (ion air outlet) C (L) 6 A B C L N KS-ANSB 9. 68 KS-ANSB 9. 68 KS-ANSB 9. 68 KS-ANSB 9. 68 KS-ANSB 9. 68.6 dia. (M ) dia. Double-wall thickness: (8.) Flexible Tube Nozzles KS-ANDC@ (M ) dia. 6 dia. Double-wall thickness: (nut) (.) (9.) 8 (9) dia. dia. (ion air outlet) Five, dia. (ion air outlet) (Double walled) (Double walled) dia. dia. dia. (L) A A L KS-ANDC 9 KS-ANDC 9 KS-ANDC 9 KS-ANDC 9 KS-ANDC 9 ZJ-FA // ZJ-FA KS 88

KS Caps Flexible Flat Nozzle Cap KS-ANDC-FT9 Flexible Shower Nozzle Caps KS-ANDC-SW@ Optional Tubes Optional Tubes for Standard Nozzles KS-ANNS-@ (9.) Lock nut.. (Double walled) (Double walled) Five, dia. (ion air outlet) A A dia. 6 6 (Double walled) Seven, dia. (ion air outlet) Type A KS-ANDC-SW6 6 KS-ANDC-SW9 9 A B C KS-ANNS-U 6 dia. dia. Conductive Urethane Tube KS-ANNS-F dia. dia. Fluororesin Tube KS-ANNS-S dia. dia. Silicon Tube Optional Products Optional Air Clean Filter KS-AZ 8 6 8 Stainless Steel Connector KS-AZ 9 6. IN dia. dia. Rc/8 dia. R/8 R/8 (Double walled). (opposing) Attached to the Ionizer for air tube connection. If using products from other manufacturers, consider using stainless steel products for less impact on the ozone layer. Cleaning / ZJ-FA // ZJ-FA KS Cat. No. E86-E- In the interest of product improvement, specifications are subject to change without notice. 89