S T F. Ultra modern manufacturing facility were the best team work in harmony to produce very high quality hydraulic motors

S T F Ultra modern manufacturing facility were the best team work in harmony to produce very high quality hydraulic motors

THE PRODUCTS For many years our company has been manufacturing Radial Piston Motor for our own use and market. Now, after many years of improvements, with the use of new technology, materials, machine tools we have achieved a quality equal or superior to our competitors. We are now offering our products to the open market. YSTFC (HD) SERIES YSTFD (HD) SERIES YITM SERIES This series of motor is based on the hydraulically balanced piston rod technology. Offering high efficiency, low noise, constant torque and long life even in the most severe applications page 2 This is a two-speed variation of the YSTFC. This series is based on the variable crankshaft which permits the motor to go from maximum displacement to zero during motion with a very smooth and constant torque output. By reducing the displacement and increasing the speed, we can meet many application requirements. page 27 This series with the bearing between the piston and crank permits even higher torque efficiency and smooth operation. With its hydraulically balanced Distributor, this series will deliver a very high volumetric efficiency. page 49 www.yptius.com YSTFC

YSTFC CONTENTS www.yptius.com YSTFC General Description page 3 Performance Data page 3 Installation Data page 4 Technical Specification page 5 YSTFC (HD) 8 Series page 6 YSTFC (HD) 1 Series page 8 YSTFC (HD) 125 Series page 1 YSTFC (HD) 2 Series page 14 YSTFC (HD) 27 Series page 18 YSTFC (HD) 325 Series page 2 YSTFC (HD) 4 Series page 22 Ordering Code page 25-2 -

GENERAL DESCRIPTION YSTFC (HD) The YSTFC Series consists of 7 sizes with 24 different displacements ranging from 61 to 415 Cu.ln/Rev (1-68 cc) and torque outputs from 2392 Lb-Ft ( 3243 Nm) to 15,427 Lb-Ft (2,916 Nm). The exceptionally well built and perfected design incorporates many of the most advanced technologies developed over the years to achieve the best efficiency, smooth running torque and speed. Our complete line of motors are manufactured to be interchangeable with other competitors and can be applied to many application. The YSTFC-HD series is an enhanced HEAVY DUTY Series for the most arduous application. A dual speed or variable speed series, (YSTFD) is also available. PERFORMANCE DATA YSTFC (HD) All performance data is based on mineral oil at 5 cst (232SSU). If motors are used with other fluid or under different condition, performance will change. Also motor return line at zero pressure. RATING DEFINITION: CONTINUOUS: For continuous duty the motor must run at rated speed and pressure INTERMITTENT: Operation within this range is based on motors running at not more than 15% of the time and for period of no more than 5 minutes. MAXIMUM: Operating without exceeding the max power and RPM for more than one minute periods. For Fire Resistant fluid, we recommend running the motors at 5% of rated speed, torque, and pressure. - 3 - www.yptius.com YSTFC

YSTFC (HD) INSTALLATION INSTRUCTIONS www.yptius.com YSTFC GENERAL INFORMATION: MOUNTING SURFACE: The mounting surface should be sufficiently strong and flat to prevent movement between the motor shaft and mating part. When motor is solidly coupled to a shaft with its own bearings, the concentricity must be within.12mm (.45:). MOUNTING POSITION: Motor housing must be filled with oil before start up of the motor. Motor mounting must be such where the drain line of the motor is below the lowest possible level of the tank to prevent draining the housing. If motor is above such line, it must have valve to prevent oil siphoning. Housing pressure must not exceed 3.5 BAR (5 PSI). In application where the drain line is long or back pressure from other components can exceed desired pressure, a relief valve should be installed. High pressure seal for 1 BAR (145 psi) available upon request. See options list HYDRAULIC FLUIDS: Depending on the application on the seal compounds, the motor can run with many different fluids Mineral Oil Water Glycols Phosphate ester HBS Water emulsion * HFA Water emulsion * * Operating pressure must be reduced see instruction page: TEMPERATURE LIMITS: Mineral oil Min. - 2C - -5 F Max. + BOC ( 175F) Water Emulsion Min. + 1C (5F) Max + 6C (14F) OTHER RECOMMENDATIONS Hydraulic fluid should be kept at 1 Micron Filtration at all time. Additives like anti-oxidant, anti-foam, and demulsifying should be used. Additional EP anti-wear should always be used. Regular motors oils and transmission fluid not recommended. BOOST PRESSURE: When operating the motor in application where the load can overrun the motor, a boost pressure must be maintained at all time to prevent cavitation. - 4 -

TECHNICAL SPECIFICATONS YSTFC (HD) TYPE YSTFC 8 YSTFC 1 YSTFC 125 YSTFC 2 YSTFC 27 YSTFC 325 YSTFC 4 Displacement Pressure nominal theory Rated pressure Max Pressure - 5 - Rated Torque ml/r in 3 /rev ml/r in 3 /rev MPA PSI MPA PSI N.m Lb/Ft N.m/MPA Unit Torque 1 61 988 6.3 23 3335 29 425 3243 2392 141.72 28 11 67 188 66.4 23 3335 29 425 3565 2629 155.79 28 125 76.3 1237 75.5 23 3335 29 425 391 2884 17.86 28 14 85.43 1385 84.5 23 3335 29 425 4554 3359 198 1.1 24 165 1.7 163 99.5 23 3335 29 425 545 3987 235 1.2 24 14 85.4 1459 89 23 3335 29 425 487 3545 29 1.6 21 16 97.6 1621 98.8 23 3335 29 425 5336 3936 232 1.18 21 18 11 1864 113.7 21 345 29 425 5586 412 266 1.35 16 2 122 227 123.7 21 345 29 425 69 4492 29 1.48 16 24 146.5 2432 148.4 23 3335 29 425 8188 639 356 1.81 175 28 17.8 2757 168.2 23 3335 29 425 9269 6836 43 2.5 15 31 189 38 188 21 345 29 425 9471 6985 451 2.29 135 33 21.4 3291 2.8 23 3335 29 425 1163 816 481 2.45 125 36 219.7 3575 218.2 23 3335 29 425 1229 8872 523 2.66 125 4 244.1 3973 242.4 21 345 29 425 1221 8999 581 2.96 1 43 262.4 4313 263.2 21 345 29 425 13251 9773 631 3.21 1 45 274.6 4538 276.9 23 3335 29 425 15272 11264 664 3.38 1 5 35.1 4992 34.6 23 3335 29 425 1679 12384 73 3.71 1 54 329.5 531 324.1 21 345 29 425 16317 1235 777 3.95 1 55 335.6 551 336.2 23 3335 29 425 18538 13673 86 4.1 12 6 366.1 5996 365.9 23 3335 29 425 2171 14877 877 4.46 12 65 396.7 6483 395.6 21 345 29 425 1998 14683 948 4.82 12 68 415 687 415.4 21 345 29 425 2916 15427 996 5.7 12 Lb/Ft/ PSI Speed Range Weight r/min kg lbs 144 318 144 318 235 518 285 628 42 926 43 948 495 19 www.yptius.com YSTFC

YSTFC (HD) 8 www.yptius.com YSTFC Torque N/M [Lb/Ft] YSTFC (HD) 8 TYPE YSTFC 8 Displacement Pressure nominal theory Rated pressure Max Pressure TECHNICAL SPECIFICATIONS - 6 - Rated Torque Unit Torque Speed Range Weight ml/r in 3 /rev ml/r in 3 /rev MPA PSI MPA PSI N.m Lb/Ft N.m/MPA Lb/Ft/PSI r/min kg lbs 1 61 988 6.3 23 3335 29 425 3243 2392 141.72 28 11 67 188 66.4 23 3335 29 425 3565 2629 155.79 28 125 76.3 1237 75.5 23 3335 29 425 391 2884 17.86 28 YSTFC (HD) 8 74 [2.91] 37 [1.46] 2-ø32 [1.26] 8-M12x27 [1.26] 6 [4425] 5 [3688] 4 [295] 3 [2213] 2 [1475] 1 [738] 2-G1/2 Drain Port 46.5 [1.83] 3.2 [1.19] 58.7 [2.31] 58.7 [2.31] 17 [22.8] 35 35 [46.9] 3 [1.19] 298.5 [11.75] 345 [13.58] 174 [6.85] YSTFC 8-125 Out Power 6 8 [8.5] [17.3] 29 [1.14] KW [HP] M16 21 [.83] 32 [1.26] 58 max [2.28] 7 15 14 175 21 245 28 Speed r/min INSTALLATION DIMENSIONS WITH F1 DISTRIBUTOR ø18 [7.9] 28.5 [4133] 23 [3335] 18 [261] 12 [174] 8 [116] +,28 +,7 ø31.5 [11.87] MPa [PSI] 126 [4.96] ø 495 [19.49] 87 [3.43] 143.51 [5.65] ø368 max [14.49] 144 318 5-ø 2 [.79] Equi-spaced Mounting holes P.C. D ø 327.3 ±,2 [12.88 ±,79 ] Rotation direction Flow direction Flow direction Rotation direction

OUTPUT OPTIONS YSTFC (HD) 8 P72 parallel key S71 BS 355 spline 7 [.28] 132 [5.2] S72 DIN 548 spline 54 [2.13] +1 +,4 +,44 -,1 +,17 -,3 18 [.71] 18 [4.25] 17 [6.69] 111 [4.37] +1,2 +,5 Key size +,37 -,19 18 [.71] wide +,1 -,6 12 [.47] thick 2 [.8] -,2 ø 54 [2.14] -,5 +,5 -,3 ø 6 [2.36] +,13 -,8 +,15 -,7 +,4 -,24 S72 DIN 548 W7x3x3x22x7h [W2.76x.12x1.18x.87x.28h] Q71 BS 355 female splined -,5 8 [3.15] -,19 ø 54,2 [2.13] 21 7 +,26 -,25 +,9 -,4 ø 74,92 [2.95] [.83] [2.76] Q71 BS 355 Pressure angle 3 Number of teeth 24 Pitch 12/24 Major diameter 53.246/52.916 [2.1/2.8] Minor diameter 48.811/48.684 [1.92/1.91] Pin diameter 3.658 [.14] Diameter between pins 45.626/45.55 [1.8/1.79] +,1 -,98 +,35 -,16-7 - +,6 -,2 132 [5.2] 19 [.75] 54 [2.13] +1 +,4 +,4 -,1 +1,5 82 [3.23] S71 BS355 Pressure angle 3 Number of teeth 14 Pitch 6/12 Major diameter 62.553/62.425 [2.46/2.45] Form diameter 55.52 [2.17] Minor diameter 54.84/53.525 [2.13/2.11] Pin diameter 8.128 [.32] Diameter over pins 71.593/71.544 [2.82/2.81] T71 tapered 95.2 [3.75] +,59 12 [.47] 6.4 [.25] 1.8 165.5 61 [6.5] [2.4] +,12 -,3 [.43] ø 95.3 [3.75] +,4 -,1 ø 61.252 [2.41] M42x2 Slotted nut 45.2 [1.78] Thick 57.15 A/F [2.25] www.yptius.com YSTFC

www.yptius.com YSTFC YSTFC (HD) 1 TYPE YSTFC 1 74 [2.91] 37 [1.46] 2-G1/2 Drain Port 46.5 [1.83] 58.7 [2.31] 2-ø32 [1.26] 8-M12x27 3.2 [1.19] 58.7 [2.31] Displacement 3 [1.19] 174 [6.85] 298.5 [11.75] 345 [13.58] YSTFC (HD) 1 M16 Pressure nominal theory Rated pressure Max Pressure 32 [1.26] 21 [.83] ø18 [7.9] 58 max [2.28] TECHNICAL SPECIFICATIONS +,28 +,7 ø31.5 [11.87] - 8 - ø 528 [2.79] 126 [4.96] Rated Torque 87 [3.43] 143.51 [5.65] ø368 max [14.49] Unit Torque Speed Range 5-ø 2 [.79] Equi-spaced Mounting holes P.C. D ø 327.3 ±,2 [12.88 ±,79 ] Rotation direction Flow direction Weight ml/r in 3 /rev ml/r in 3 /rev MPA PSI MPA PSI N.m Lb/Ft N.m/MPA Lb/Ft/PSI r/min kg lbs 14 85.43 1385 84.5 23 3335 29 425 4554 3359 198 1.1 24 165 1.7 163 99.5 23 3335 29 425 545 3987 235 1.2 24 YSTFC (HD) 1 Out Power KW [HP] Torque N/M [Lb/Ft] 7 [5163] 6 [4425] 5 [3688] 4 [295] 3 [2213] 2 [1475] 1 [738] 17 [22.8] YSTFC 1-165 35 [46.9] 48 6 [8.5] 8 [17.3] 96 144 192 24 Speed r/min 28.5 [4133] 23 [3335] 18 [261] 12 [174] 8 [116] MPa [PSI] INSTALLATION DIMENSIONS WITH F1 DISTRIBUTOR 144 318 Flow direction Rotation direction

OUTPUT OPTIONS YSTFC (HD) 1 7 [.28] P72 parallel key S71 BS 355 spline 18 [.71] 17 [6.69] ø 54 [2.13] S72 DIN 548 spline 132 [5.2] 54 [2.13] +1 +,4 111 [4.37] S72 DIN 548 W7x3x3x22x7h [W2.76x.12x1.18x.87x.28h] Same dimensions as S71 18 [.71] wide 12 [.47] thick ø 6 [2.36] Q71 BS 355 female spline ø 54,2 [2.13] +,44 -,1 -,5 8 [3.15] -,19 21 7 +,26 -,25 +,9 -,4 +,17 -,3 ø 74,92 [2.95] 18 [4.25] +1,2 +,5 [.83] [2.76] Key size 2 [.8] -,2 -,5 +,37 -,19 +,1 -,6 +,5 -,3 +,13 -,8 +,15 -,7 +,4 -,24 Q71 BS 355 Pressure angle 3 Number of teeth 24 Pitch 12/24 Major diameter 53.246/52.916 [2.1/2.8] Minor diameter 48.811/48.684 [1.92/1.91] Pin diameter 3.658 [.14] Diameter between pins 45.626/45.55 [1.8/1.79] +,1 -,98 +,35 -,16-9 - +,6 -,2 132 [5.2] 54 [2.13] +1 +,4 +,4 -,1 19 [.75] +1,5 82 [3.23] S71 BS355 Pressure angle 3 Number of teeth 14 Pitch 6/12 Major diameter 62.553/62.425 [2.46/2.45] Form diameter 55.52 [2.17] Minor diameter 54.84/53.525 [2.13/2.11] Pin diameter 8.128 [.32] Diameter over pins 71.593/71.544 [2.82/2.81] T71 tapered 95.2 [3.75] +,59 12 [.47] 6.4 [.25] 1.8 165.5 61 [6.5] [2.4] +,12 -,3 [.43] ø 95.3 [3.75] +,4 -,1 ø 61.252 [2.41] M42x2 Slotted nut 45.2 [1.78] Thick 57.15 A/F [2.25] www.yptius.com YSTFC

www.yptius.com YSTFC YSTFC (HD) 125 TYPE YSTFC 125 Out Power KW [HP] 17 [22.8] 8 [59] 7 [5163] 6 [4425] 5 [3688] 4 [295] 3 [2213] 2 [1475] 1 [738] Displacement YSTFC 125-2 Pressure nominal theory Rated pressure Max Pressure - 1 - Rated Torque Unit Torque Speed Range Weight ml/r in 3 /rev ml/r in 3 /rev MPA PSI MPA PSI N.m Lb/Ft N.m/MPA Lb/Ft/PSI r/min kg lbs 14 85.4 1459 89 23 3335 29 425 487 3545 29 1.6 21 16 97.6 1621 98.8 23 3335 29 425 5336 3936 232 1.18 21 18 11 1864 113.7 21 345 29 425 5586 412 266 1.35 16 2 122 227 123.7 21 345 29 425 69 4492 29 1.48 16 YSTFC (HD) 125 149.5 [5.89] 78.5 [3.9] 36.5 [1.44] Torque N/M [Lb/Ft] 58.7 [2.31] 8-M16x35 2-ø38 [1.15] 93.2 [3.67] 52.5 [2.7] 36.5 [1.44] 79.4 [3.13] 35 6 8 [46.9] [8.5] [17.3] 48 425 [16.73] YSTFC (HD) 125 2-G3/4 Drain Port 23 [7.99] 348.5 [13.72] 49 [1.93] 96 144 192 24 Speed r/min M2 3 [1.18] 21 [.83] 28.5 [4133] 23 [3335] 18 [261] 12 [174] 8 [116] MPa [PSI] TECHNICAL SPECIFICATIONS INSTALLATION DIMENSIONS WITH F2 DISTRIBUTOR ø26 [1.24] ø381f7 (ø31.5k7) [15.] [11.85] 16 [6.3] ø 575 [22.65] 44.4 max [1.75] (P73, T71, S71, S72) 57 max [2.24] (P72, P74, T72, T73, S73, S74, Q71) 7.1 [.28] YSTFC (HD) 125 OUTPUT OPTIONS 235 518 Q71 BS 355 female spline 118.6 [4.67] 41 [1.62] +1,6 135.5 [5.33] 148 [5.83] ø473 max [18.62] ø76.78 [3.3] 76.666 [3.2] 76.1 +,63 [2.99] 5-ø 21 [.83] Chioce mounting holes Equi-spaced P.C. D ø419.1 ±,2 [16.5 ±,7 ] ø 381 f7 [15.] 12 Rotation direction Flow direction Flow direction Rotation direction 5-ø 21 [.83] Standard Mounting holes Equi-spaced P.C. D ø 327 ±,2 [12.87 ±,7 ] ø 31.5 k7 [11.87] Q71 BS 355 Pressure angle 3 Number of teeth 34 Pitch 12/24 Major diameter 74.414/74.84 [2.93/2.92] Minor diameter 69.977/69.85 [2.76/2.75] Pin diameter 3.658 [1.14] Diameter over pins 66.815/66.744 [2.63/2.63]

OUTPUT OPTIONS YSTFC (HD) 125 P72 parallel key P74 long keyed shaft +,51 +,2 24 [.95] +1,3 19 [7.48] 13.2 [5.13] +,5 3 [.12] -,3 77 [3.3] -,8 Key size +,66 24 [.94] wide +,5 16 [.63] thick +,4 -,5 ø 85 [3.35] +,11 -,9 +,2 +,19 S73 BS 355 spline 156.4 [6.16] +1,6 +,63 76 [2.99] S73 BS 355-1963 Pressure angle 3 Number of teeth 23 Pitch 6/12 Major diameter 1.652/1.526 [3.96/3.95] Form diameter 92.939 [3.66] Minor diameter 92.184/91.626 [3.63/3.61] Pin diameter 8.128 [.32] Diameter over pins 19.573/19.517 [4.31/4.31] T72 short tapered +,4 -,1 84.5 [3.33] 1.5 137 [5.39] 8.1 [3.15] [.41] +1,4 +,16 -,3 +,55 25.4 [1.] 35 [1.38] +,3 +,12 Key size ø 98.44 [3.86] M64x2 -,2 -,7 25.55 [1.] wide +,39 -,38 -,7 -,28 +,15 -,15 17.5 [.69] thick nut 29 thick 98.4 A/F 3.87-11 - +,2 -,3 +,8 -,12 22.2 [.87] +,51 73.2 [2.88] +,2 24 [.94] +,75 +,25 +1,4 195 [7.68] 13.2 [5.13] +,55 3 [.12] -,3 92 [3.62] -,8 Key size +,66 24 [.94] wide 16 [.63] thick +,7 +,2 +,5 ø 1 [3.35] +,2 +,19 S74 DIN 548 spline 156.4 [6.16] T73 long tapered 12.52 [4.74] 9.5 +1,6 +,63 +,3 +,9 [.37] +1,3 +,51 76 [2.99] 12 [.47] 185 [7.28] DIN 548 W1x4x27x7h [W3.94x.16x1.6x.28h] Same dimensions as S73 6.4 [.25] Key size 22.22 [.87] wide 16 [.63] thick ø 95.3 [3.75] 61 [2.4] +,7 +,2 -,8 -,13 ø 85.344 [3.36] +,28 +,7 -,31 -,51 M42x2 slotted nut 45.2 thick 57.15 A/F 2.25 www.yptius.com YSTFC

YSTFC 125 OUTPUT OPTIONS P73 parallel key S71 BS 355 spline www.yptius.com YSTFC +,51 +,2 24 [.95] 178 [7.] 13.2 [5.13] +1,4 +,55 S72 DIN 548 spline +1,6 142.2 [5.6] +,63 76 [2.99] 3 [.12] -,3 77 [3.3] -,8 Key size +,66 24 [.94] wide +,5 16 [.63] thick +,4 -,5 ø 85 [3.35] +,11 -,9 +,2 +,19 S72 DIN 548 W85x3x27x7h [W3.35x.12x1.6x.28h] Same dimensions as S71-12 - 22.2 [.87] +,2 -,3 +,7 -,11 +1,6 142.2 [5.6] +,63 133.4 [5.25] +,75 +,25 9.5 [.37] 12 [.47] 76 [2.99] 185 [7.28] T71 tapered +,3 +,9 S71 BS 355-1963 Pressure angle 3 Number of teeth 2 Pitch 6/12 Major diameter 87.953/87.825 [3.46/3.45] Form diameter 8.264 [3.16] Minor diameter 79.485/78.925 [3.13/3.11] Pin diameter 8.128 [.32] Diameter over pins 97.84/97.3 [3.82/3.82] 6.4 [.25] Key size 22,22 [.87] wide 16 [.63] thick ø95.3 [3.75] M42x2 61 [2.4] +,7 +,2 -,8 -,13 ø85.334 [3.36] -,31 -,51 +,27 +,7 Slotted nut 45.2 [1.779] Thick 57.15 A/F [2.25]

DISTRIBUTOR DATA YSTFC (HD) 125 F1 DISTRIBUTOR 74 [2.91] 37 [1.46] ø 254 [1.] 58.7 [2.31] 2-ø32 [1.26] 8-M12x27 85 [3.55] 46.5 [1.83] 58.7 [2.31] 3.2 [1.19] 3.2 [1.19] - 13-373 [14.69] 281 [11.6] www.yptius.com YSTFC

www.yptius.com YSTFC YSTFC (HD) 2 149.5 [5.89] TYPE YSTFC 2 78.5 [3.9] 36.5 [1.44] 8-M16x35 2-ø38 [1.5] 2-G3/4 Drain Port 52.5 [2.7] 79.4 [3.13] 36.5 [1.44] Displacement 79,4 [3.14] 361.5 [14.23] 438 [17.24] 216 [8.5] 35 [1.38] M2 3 [1.18] 23 [.91] Pressure nominal theory Rated pressure Max Pressure ø 215 [8.46] -,19 -,51 ø 381 [15.] -,5 -,13 16 [6.3] - 14 - ø 66 [25.98] 32 max [1.26] (P71, T71, S71, S72) 44.4 max [1.75] (P73, P72, T72, S73, S74, Q71) Rated Torque 135 [5.31] 17.5 [6.71] ø473 max [18.62] Unit Torque Speed Range Weight ml/r in 3 /rev ml/r in 3 /rev MPA PSI MPA PSI N.m Lb/Ft N.m/MPA Lb/Ft/PSI r/min kg lbs 24 146.5 2432 148.4 23 3335 29 425 8188 639 356 1.81 175 28 17.8 2757 168.2 23 3335 29 425 9269 6836 43 2.5 15 31 189 38 188 21 345 29 425 9471 6985 451 2.29 135 YSTFC (HD) 2 Out Power KW [HP] Torque N/M [Lb/Ft] Speed 14 [1326] 12 [8851] 1 [7376] 8 [59] 6 [4425] 4 [295] 2 [1475] r/min 3 [4.2] 2 YSTFC 2-31 55 75 [73.8] [1.6] 9 [12.7] YSTFC (HD) 2 4 6 8 1 12 135 28.5 [4133] 23 [3335] 18 [261] 12 [174] 8 [116] MPa [PSI] TECHNICAL SPECIFICATIONS INSTALLATION DIMENSIONS WITH F2 DISTRIBUTOR 285 628 5-ø 21 [.83] Equi-spaced mounting holes P.C. D ø419.1 ±,2 [16.5 ±,7 ] Rotation direction Flow direction Flow direction Rotation direction

OUTPUT OPTIONS YSTFC (HD) 2 P71 parallel key T71 tapered +,51 24 [.95] +,2 13.2 [5.13] +1,5 165 [6.5] +,59 3 [.12 ] +,1 -,9 +,4 -,35 77 [3.3] Key size +,66 24 [.95] wide +,5 +,26 +,2 16 [.63] thick +,11 -,9 +,4 -,3 ø85 [3.35] S71 BS 355 spline 76 [2.99] +1,4 129.6 [5.1] +,551 S71 BS 355-1963 Pressure angle 3 Number of teeth 2 Pitch 6/12 Major diameter 87.953/87.825 [3.46/3.45] Form diameter 8.246 [3.16] Minor diameter 79.485/78.925 [3.13/3.11] Pin diameter 8.128 [.32] Diameter over pins 97.84/97.3 [3.82/3.82] - 15-22.2 [.87] +,2 -,3 +,7 -,11 129.6 [5.1] 133.3 [5.25] +,75 +,25 +,3 +,9 9.5 [.37] 12 [.47] +1 6.7 [2.39] +,394 172 [6.77] 6.4 [.25] ø95.3 [3.75] M42x2 61 [2.4] Key size +,7 +,2 22,2 [.87] wide -,8 -,13 16 [.63] thick ø85.334 [3.36] -,31 -,51 Slotted nut 45.2 [1.78] Thick 57.15 A/F [2.25] +,27 +,7 S72 DIN 548 spline 76 [2.99] +1,4 +,551 DIN 548 W85x3x27x7h [W3.35x.12x1.6x.28h] Same dimensions as S71 www.yptius.com YSTFC

www.yptius.com YSTFC 7.1 [.28] YSTFC (HD) 2 143.8 [5.66] P73 parallel shaft Q71 BS 355 female spline 118.6 [4.67] 24 [.95] 182 S74 DIN 548 spline 76 [2.99] 98.3 [3.87] +1,5 +,51 +,591 13.2 [5.13] +1,6 +,2 +,63 41 [1.61] -,2 -,14 63.5 [2.5] ø76.8 [3.2] +1,5 -,7 -,55 +,591 Key size 24 [.95] wide 16 [.63] thick 3 [.12] +,2 -,5 [7.16] +,66 +,5 +,8 -,2 92 [3.62] +,2 +,26 +,2,8 ø1 [3.94] S74 DIN 548 W1x4x24x7h [W3.94x.16x.94x.28h Same dimensions as S73 Q71 BS 355-1963 Pressure angle 3 Number of teeth 34 Pitch 12/24 Major diameter 74.414/74.84 [2.93/2.92] Minor diameter 69.977/69.85 [2.76/2.75] Pin diameter 3.658 [.14] Diameter between pins 66.815/66.744 [2.63] - 16 - OUTPUT OPTIONS 76 [2.99] 98.3 [3.87] +1,5 143.8 [5.66] S73 BS 355 spline +,591 71.8 [2.83] 8.1 [3.15] +1,2 124 [6.77] +,472 S73 BS 355-1963 Pressure angle 3 Number of teeth 23 Pitch 6/12 Major diameter 1.652/1.526 [3.96/3.96] Form diameter 92.939 [3.66] Minor diameter 92.184/91.626 [3.63/3.61] Pin diameter 8.128 [.32] Diameter over pins 19.573/19.517 [4.31/4.32] T72 short tapered 25.4 [1.] 1.5 [.41] +,2 -,3 +,75 +,25 35 [1.38] +,7 -,11 +,3 +,9 ø98.44 [3.86] M42x2 Key size +,3 Nut 29 [1.14] Thick 98.4 A/F [3.87] 25.5 [1.1] wide +,39 -,38 -,8 -,28 -,15 -,15 17.5 [.69] thick

DISTRIBUTOR DATA YSTFC (HD) 2 F1 DISTRIBUTOR 74 [2.91] 37 [1.46] ø 254 [1.] 58.7 [2.31] 58.7 2-ø32 [1.26] 8-M12x27 85 [3.35] [2.31] 46.5 [1.83] 3.2 [1.19] - 17-3.2 [1.19] 294 [11.57] 386 [15.2] www.yptius.com YSTFC

www.yptius.com YSTFC YSTFC (HD) 27 TYPE YSTFC 27 149.5 [5.89] 78.5 [3.9] 36.5 [1.44] 2-G3/4 Drain Port 79.4 [3.13] 35 [1.38] 3 [1.18] 8-M16x35 24 [.94] 2-ø38 [1.5] Displacement 52.5 [2.7] 36.5 [1.44] 79.4 [3.13] 454 [17.87] 232 [9.13] 377.5 [14.86] M2 Pressure nominal theory Rated pressure Max Pressure ø255 [1.4] +,59 +,28 +,15 ø 457 +,7 [17.99] 37 max [1.46] 51 max [2.1] (P74) - 18 - ø 712 [28.3] ø 16 [6.3] Rated Torque 174 [6.85] 22 [8.66] ø 57 max [22.44] P74 long keyed shaft 14.2 [5.52] +1,4 +,51 24. [.95] 3 [.12] +,2 -,5 22.7 +,55 [7. 98] Unit Torque +,2 92 +,8 -,2 [3.62] 7-ø 21 [.83] Equi-spaced mounting holes P.C. D ø 52.7 ±,2 [2.5 ±,79 ] Key size 24 [.95] wide 16 [.63] thick +,2 +,66 +,5 +,8 ø 1 [3.94] Speed Range +,26 +,2 Weight ml/r in 3 /rev ml/r in 3 /rev MPA PSI MPA PSI N.m Lb/Ft N.m/MPA Lb/Ft/PSI r/min kg lbs 33 21.4 3291 2.8 23 3335 29 425 1163 816 481 2.45 125 36 219.7 3575 218.2 23 3335 29 425 1229 8872 523 2.66 125 4 244.1 3973 242.4 21 345 29 425 1221 8999 581 2.96 1 43 263.2 4313 263.2 21 345 29 425 13251 9773 631 3.21 1 YSTFC (HD) 27 Out Power KW [HP] Torque N/M [Lb/Ft] YSTFC 27-43 18 [13276] 28.5 [4133] 15 [1163] 12 [8851] 9 [6638] 6 [4425] 3 [2213] 75 [1.6] 3 55 [4.2] [73.8] 9 [12.7] 2 4 6 8 1 Speed YSTFC (HD) 27 r/min 23 [3335] 18 [261] 12 [174] 8 [116] MPa [PSI] TECHNICAL SPECIFICATIONS INSTALLATION DIMENSIONS WITH F3 DISTRIBUTOR 42 926 Rotation direction Flow direction Flow direction Rotation direction YSTFC (HD) 27 OUTPUT OPTIONS

OUTPUT OPTIONS YSTFC 27 14.2 [5.52] 149,2 [5.87] P73 parallel key +2,9 +,51 +,2 24. [.95] 3 [.12] +,1 -,6 77 187.1 +,1142 [7. 36] 138.6 76 [2.99] [5.46] 83.3 [3.28] +,4 -,24 [3.3] Key size 24 [.95] wide 16 [.63] thick +,1 -,6 +,66 +,5 +,4 -,4 ø 85 [3.35] +,26 +,2 S72 DIN 548 spline +2,1 +,827 T72 short tapered +,3 71.75 [2.82] 25.4 [1.] 1.5 [.41] +1,1 +,12 +,43 +,4 -,1 +,16 -,4 124.6 35 [1.38] [4.9] S72 DIN 548 W1x4x24x7h [W3.94x.16x.94x.28h] Same dimensions as S71 ø98.44 [3.86] Key size -,2 -,7 25.55 [1.1] wide +,39 -,38 17.5 [.69] thick M64x2 Nut 29 [1.14] Thick 98.4 A/F [3.87] -,8 -,28 +,15 -,15-19 - 25.4 [1.] 57 [2.24] -,5 +1,6 138.6 [5.46] -,19 +,63 S71 BS 355 spline 76 [2.99] +2,1 +,827 133.4 [5.25] +,4 -,1 +,16 -,4 1.5 [.41] 12 [.47] 183 [7.2] S71 BS 355-1963 Pressure angle 3 Number of teeth 2 Pitch 6/12 Major diameter 87.953/87.825 [3.46] Form diameter 8.264 [3.16] Minor diameter 79.485/78.925 [3.13/3.11] Pin diameter 8.128 [.32] Diameter over pins 97.84/97.3 [3.82] T71 tapered 6.3 [.25] ø95.3 [3.75] M42x2 67 [2.64] Key size 25.55 [1.1] wide 17.5 [.69] thick ø 99.446 [3.92] -,2 -,7 +,39 -,38 Slotted nut 45.2 [1.779] Thick 57.15 A/F [2.25] -,8 -,28 +,15 -,15 Q72 BS 355 female spline 116.2 -,1 [4.57] 1 -,6 37 -,39 [.39] [1.46] -,236 +,5 +,197 +,33 ø 76.5 [3.1] 53.6 [2.11] +,1 -,4 +,29 -,157 +,13 +1,4 +,551 Q72 BS 355-1963 Pressure angle 3 Number of teeth 34 Pitch 12/24 Major diameter 74.414/74.84 [2.93/2.92] Minor diameter 69.977/69.85 [2.76/2.75] Pin diameter 3.658 [.14] Diameter between pins 66.815/66.744 [2.63] www.yptius.com YSTFC

www.yptius.com YSTFC YSTFC (HD) 325 TYPE YSTFC 325 149.5 [5.89] 78.5 [3.9] 2-G3/4 Drain Port 36.5 [1.44] 79.4 [3.13] 8-M16x35 2-ø38 [1.5] 22 [16226] 2 [17251] 18 [13276] 15 [1163] 12 [8851] 9 [6638] 6 [4425] 3 [2213] 52.5 [2.7] 36.5 [1.44] Displacement 79.4 [3.13] 454 [17.87] 232 [9.13] 377.5 [14.86] 35 [1.38] M2 3 [1.18] 24 [.94] ø255 [1.4] Pressure nominal theory Rated pressure Max Pressure +,59 +,28 +,15 ø 457 +,7 [17.99] 37 max [1.46] 51 max [2.1] (P74) ø 746 [29.37] - 2 - ø 16 [6.3] Rated Torque 14.2 [5.52] +1,4 174 [6.85] 22 [8.66] ø 57 max [22.44] 22.7 +,55 [7. 98] P74 long keyed shaft +,51 +,2 24. [.95] 3 [.12] +,2 -,5 92 Unit Torque +,8 -,2 [3.62] 7-ø 21 [.83] Equi-spaced mounting holes P.C. D ø 52.7 ±,2 [2.5 ±,79 ] Key size 24 [.95] wide 16 [.63] thick +,2 +,66 +,5 +,8 ø 1 [3.94] +,26 +,2 Speed Range Weight ml/r in 3 /rev ml/r in 3 /rev MPA PSI MPA PSI N.m Lb/Ft N.m/MPA Lb/Ft/PSI r/min kg lbs 45 274.6 4538 276.9 23 3335 29 425 15272 11264 664 3.38 1 5 35.1 4992 34.6 23 3335 29 425 1679 12384 73 3.71 1 54 329.5 531 324.1 21 345 29 425 16317 1235 777 3.95 1 YSTFC (HD) 325 2 YSTFC325 Out Power KW [HP] 45 75 1 [6.3] [1.6] [134.1] Torque N/M [Lb/Ft] YSTFC (HD) 325 4 6 8 1 Speed r/min 28.5 [4133] 23 [3335] 18 [261] 12 [174] 8 [116] MPa [PSI] TECHNICAL SPECIFICATIONS INSTALLATION DIMENSIONS WITH F2 DISTRIBUTOR 43 948 Rotation direction Flow direction Flow direction Rotation direction YSTFC (HD) 325 OUTPUT OPTIONS

25.4 [1.] 57 [2.24] -,5 P73 parallel key 187.1 +,1142 [7. 36] S71 BS 355 spline shaft S72 splined shaft DIN 548 76 [2.99] +2,1 138.6 [5.46] -,19 +1,6 +,63 14.2 [5.52] 149,2 [5.87] +2,9 +,827 +,51 133.4 [5.25] +,4 -,1 +,16 -,4 1.5 [.41] 12 [.47] 183 [7.2] +,2 24. [.95] 3 [.12] +,1 -,6 77 +,4 -,24 [3.3] Key size 24 [.95] wide 16 [.63] thick +,1 -,6 +,66 +,5 +,4 -,4 ø 85 [3.35] +,26 +,2 S71 BS 355-1963 Pressure angle 3 Number of teeth 2 Pitch 6/12 Major diameter 87.953/87.825 [3.46] Form diameter 8.264 [3.16] Minor diameter 79.485/78.925 [3.13/3.11] Pin diameter 8.128 [.32] Diameter over pins 97.84/97.3 [4.31/4.32] T71 tapered 6.3 [.25] OUTPUT OPTIONS YSTFC 325 ø95.3 [3.75] M42x2 67 [2.64] Key size 25.55 [1.1] wide 17.5 [.69] thick ø 99.446 [3.92] -,2 -,7 +,39 -,38 Slotted nut 45.2 [1.779] Thick 57.15 A/F [2.25] -,8 -,28 +,15 -,15-21 - Q72 BS 355 female spline 116.2 -,1 1 -,6 37 -,39 [.39] [1.46] -,236 +,5 T72 short tapered shaft 83.3 [3.28] [4.57] +,3 71.75 [2.82] 25.4 [1.] 1.5 [.41] +1,1 +,12 +,43 +,197 +,33 53.6 [2.11] +,1 -,4 +,29 -,157 +,13 ø 76.5 [3.1] +1,4 +,551 138.6 +,4 -,1 +,16 -,4 124.6 35 [1.38] [4.9] 76 [2.99] [5.46] +2,1 ø98.44 [3.86] Q72 BS 355-1963 Pressure angle 3 Number of teeth 34 Pitch 12/24 Major diameter 74.414/74.84 [2.93/2.92] Minor diameter 69.977/69.85 [2.76/2.75] Pin diameter 3.658 [.14] Diameter between pins 66.815/66.744 [2.63] +,827 Key size -,2 -,7 25.55 [1.1] wide +,39 -,38 17.5 [.69] thick M64x2 Nut 29 [1.14] Thick 98.4 A/F [3.87] S72 DIN 548 W1x4x24x7h [W3.94x.16x.94x.28h] Same dimensions as S71 -,8 -,28 +,15 -,15 www.yptius.com YSTFC

www.yptius.com YSTFC 15 [4.13] YSTFC (HD) 4 G1 1/4 77.7 [3.6] TYPE YSTFC 4 4-M12x25 ø 425 [16.73] ø 35 [1.38] 15 [4.13] 3 [22127] 25 [18439] 2 [14751] 15 [1163] 1 [7376] 5 [3688] 18 [4.25] 52 [2.5] 38.9 [1.53] 21.6 [.85] 43.2 [1.7] 136.5 [5.37] 117.5 [4.63] 43.2 [1.7] 77.7 [3.6] 21.6 [.85] 6-M12x28 44 [1.73] Displacement 66.5 [2.62] 157 [6.18] 565 [22.24] 35.3 [12.2] 16 [6.3] 5-ø 21 [.83] Equi-spaced mounting holes P.C. D ø 419.1 ±,2 [16.5 ±,79 ] 64.1 [2.52] 38.9 [1.53] 436 [17.17] G1 1/4 32 [1.26] Pressure nominal theory Rated pressure Max Pressure M2 13 [.51] 57 [2.24] ø 234 [9.21] 4 max [1.57] -,2 -,51 -,5 ø 381 -,13 [15.] 3 [1.18] - 22 - ø 476 max [18.74] Rated Torque 72 Unit Torque 72 Speed Range 2-G3/4 drain port ø 242 [9.53] ø 655 [25.79] Weight ml/r in 3 /rev ml/r in 3 /rev MPA PSI MPA PSI N.m Lb/Ft N.m/MPA Lb/Ft/PSI r/min kg lbs 55 335.6 551 336.2 23 3335 29 425 18538 13673 86 4.1 12 6 366.1 5996 365.9 23 3335 29 425 2171 14877 877 4.46 12 65 396.7 6483 395.6 21 345 29 425 1998 14683 948 4.82 12 68 415 687 415.4 21 345 29 425 2916 15427 996 5.7 12 YSTFC (HD) 4 Torque N/M [Lb/Ft] Speed r/min YSTFC 4-68 75 [1.6] 55 [73.8] 2 1 [134.1] 12 [16.9] Out Power KW [HP] 4 6 8 1 12 YSTFC (HD) 4 28.5 [4133] 23 [3335] 18 [261] 12 [174] 8 [116] MPa [PSI] TECHNICAL SPECIFICATIONS INSTALLATION DIMENSIONS WITH F4 DISTRIBUTOR 495 19

OUTPUT OPTIONS YSTFC 4 89 [3.5] 24. [.95] 114.3 [4.5] 119 [4.69] +,5 +,2 +2,4 182.6 [7.19] +,945 P71 keyed 3 [.12] -,1 84 -,39 [3.31] +,2 -,5 ø 92 [3.62] Key size +,66 +,26 24 [.95] wide +,5 +,2 16 [.63] thick +,8 ø 1 [3.94] S71 BS 355 splined 182.6 [7.19] +2.4 +.945 11.6 [4.] +,2 +,8 S71 BS 355-1963 Pressure angle 3 Number of teeth 23 Pitch 6/12 Major diameter 1.653/1.526 [3.96] Form diameter 92.939 [3.66] Minor diameter 92.184/91.625 [3.63/3.61] Pin diameter 8.128 [.32] Diameter over pins 19.573/19.517 [4.31] Q71 female splined BS 355 +,41 -,1 +,16 -,39 7.1 [.28] 7 max [2.76] 56 [2.2] 41 [1.61] +,3 +,25 +.118 +.98 114 [4.49] ø 191 [7.52] ø 254 [1.] Q71 BS 355-1963 Pressure angle 3 Number of teeth 31 Pitch 1/2 Major diameter 81.66/81.28 [3.21/3.2] Form diameter 8.83 [3.18] Minor diameter 76.33/76.2 [3.1/3.] Pin diameter 4.389/4.293 [.17] Diameter over pins 72.466/72.39 [2.85] - 23-8.1 [3.15] +,4 -,1 +,16 -,4 1.5 [.41] 136 35 [5.35] [1.38] T71 Tapered 25.4 [1.] +1,9 +,3 ø 98.44 [3.86] 83.51 [3.28] Key size -,2 -,8 25.5 -,7 [1.1] -,28 wide 17.5 -,38 [.69] -,15 thick M64x2 +,748 +,12 +,39 +,15 Nut 29 [1.14] Thick 98.4 A/F [3.87] S72 DIN 548 splined 182.6 [7.19] +2.4 +.945 11.6 [4.] 72 DIN 548 W1x4x24x7h [W3.94x.16x.94x.28h Same dimensions as S71 www.yptius.com YSTFC

www.yptius.com YSTFC YSTFC (HD) 4 F4 DISTRIBUTOR 18 [4.25] ø 425 [16.73] 79.3 [3.12] 14 [5.51] 14 [5.51] 39.7 [1.56] 4-ø 38 [1.5] 34 [1.34] 92 [3.62] 46 [1.81] 65.1 [2.56] 46 [1.81] 165 [6.49] 65.1 [2.56] 111 [4.37] 2-G3/4 [drain port] 568 [22.36] 422 [16.61] 12 M12x32-24 - DISTRIBUTOR DATA

ORDERING CODE YSTFC - Standard Motor YSTFC (HD) model of STF Hydraulic Motor TYPE NOMINAL DISPLACEMENT OUTPUT SHAFT P - Parallel Keyed Shaft T - Taper Key Shaft S - Spline Shaft Q - Internal Spline Shaft DISTRIBUTOR OTHERS EXAMPLE **** *** *** *** *** ****** YSTFC 27 43 P71 F3 YSTFC-27-43-P71-F3 Means YSTFC series low speed, high torque hydraulic motor type is 27 nominal displacement is 43 ml/r output shaft is P71 distributor is F3 Detailed mounting data refers to dimension drawing - 25 - www.yptius.com YSTFC

QUALITY CONTROL INSTRUMENTS The most modern and advanced quality control equipments are used to insure absolutely the best quality products available on the market today www.yptius.com - 26 -

YSTFD CONTENTS Product features page 28 Main characteristics page 28 YSTFD (HD) 1 Series page 29 YSTFD (HD) 125 Series page 33 YSTFD (HD) 2 Series page 37 YSTFD (HD) 27 Series page 41 YSTFD (HD) 325 Series page 45-27 - www.yptius.com YSTFD

PRODUCT FEATURE YSTFD (HD) The YSTFD, two-speed series, Low Speed High Torque hydraulic motor is a further development of the YSTFC single speed unit. This unit incorporates all the features of the single speed motors like hydrostatically balanced pistons and distributors, heavy duty tapered roller bearings and many other technological improvements over the competition to deliver the smoothest and most efficient power possible. www.yptius.com YSTFD With 5 series, many high and low displacements from 1 to 53 CC, these motors can fit such applications like marine, mining, constuction, forestry, farming, fishing and many more. Each motor is available in two pre-selected displacement with a wide range of options. The displacements are selected by a manual control located on the motor or a remotely located control. Displacement can be easily changed while the motor is running. MAIN CHARATCTERISTICS 1. Low Speed & High Torque output 2. High Efficiency 3. Smooth Running 4. Wide range of Displacements 5. Switch displacement while running 6. Change realized with either manual or remote control - 28 - YSTFD (HD)

YSTFD (HD) 1 YSTFD (HD) 1 ORDERING CODE **** *** *** *** *** *** *** ** EXAMPLE - 29 - TYPE OF SWITCH VALVE ** - Null control Valve EK - Electromagnetic control valve MK - Manual Control Valve VARIABLE CONTROL DISTRIBUTOR SHAFT OPTIONS P - Parallel Keyed Shaft T - Cone Shaft S - Involute Spline Shaft Q - Internal Spline Shaft SMALL DISPLACEMENT LARGE DISPLACEMENT TYPE YSTFD (HD) model YSTFD 1 12 6 S71 F2 L1A ** YSTFD-1-12-6-S71-F2-L1A-** Series YSTFD Type 1 Displacement 12/6 cc Shaft options S71 Distributor F2 Variable control L1A Type of switch valve ** www.yptius.com YSTFD

TECHNICAL SPECIFICATIONS YSTFD (HD) 1 www.yptius.com YSTFD Nominal displacement 16 15 14 13 12 11 1 9 8 7 6 5 4 3 2 1 Displacement ml/r 158 1481 1383 1284 1185 186 987 889 79 691 592 494 395 296 197 98 in 3 /r 96.4 9.3 84.4 78.3 72.3 66.3 6.2 54.7 48.2 42.2 36.1 3.1 24.1 18.1 12. 6. Unit Torque N.m/Mpa 225 212 198 184 169 155 14 125 18 94 78 68 45 3 18 lb ft/psi 11.48 1.81 1.1 9.38 8.62 7.91 7.14 6.8 5.51 4.99 3.98 3.47 2.3 1.53.92 Max. Cont. Speed r/min 26 27 28 3 33 37 45 485 54 54 54 54 54 54 54 9 Max. Cont Power KW 99 98 96 93 9 84 82 79 74 69 57 46 35 23 1 HP 132.7 131.3 128.6 124.6 12.6 112.6 19.9 15.9 99.2 92.5 76.4 61.6 46.9 3.8 13.4 Max. Top Power KW 12 117 113 19 15 1 97 93 87 81 68 54 4 28 14 HP 16.8 156.8 151.4 146.1 14.7 134. 129. 124.6 116.6 18.5 91.1 72.4 53.6 37.5 18.8 Max. Cont Pressure Mpa 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 15 PSI 345 345 345 345 345 345 345 345 345 345 345 345 345 345 345 2175 Max. Top Pressure Mpa 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 15 PSI 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 2175 DISPLACEMENT OPTIONS YSTFD (HD) 1 large displacement: 16, 15, 14, 13, 12, 11, 1, 9, 8 small displacement: 11, 1, 8, 7, 6, 5, 4, 3, 2, 1 F1 - L1C F1 - L1A FUNCTION SYMBOLS YSTFD (HD) 1-3 - F1 - L1D F1 - L1B

YSTFD (HD) 1 INSTALLATION DIMENSIONS WITH F1 DISTRIBUTOR *1 UNF 3/4-16 drain port 2- G1/2 drain port 46.5 [1.83] 3.2 [1.19] Housing profile for type Q shaft see next page ø 528 [2.79] 5-ø 2 [.79] Equi-spaced P.C. D ø 327.3 ±,2 [12.88 ±,79 ] 74 [2.91] 37 [1.48] 58.7 [2.31] 2-ø32 [1.26] 8-M12x27 [1.6] YSTFD (HD) 1 11 [.43] L1A MOUNTING DATA 13 [.51] 58.7 [2.31] 2-G1/4 15 ø 22 [.87] Y 3.2 [1.19] X 35.5 [13.8] 397 [15.63] 27.2 [1.7] 17 [.67] 174 [6.85] 174 [6.85] 29 [1.14] M16 21 [.83] 59 max [2.32] ø 18 [7.9] +,28 32 [1.26] +,7 ø 31.5 [11.87] - 31-126 [4.96] 9 [3.54] 87 [3.43] 143.51 [5.65] ø 368 max [14.49] Rotation direction Flow direction Flow direction Rotation direction VARIABLE CONTROL MOUNTING DATA L1B-L1C-L1D - MOUNTING DATA 4-M5 2-G1/4 15 ø 22 [.87] 32.5 [1.28] 31 [1.22] 12 [.47] 19 [.75] 11.25 [.44] 174 [6.85] 4.5 [1.59] www.yptius.com YSTFD

OUTPUT OPTIONS YSTFD (HD) 1 www.yptius.com YSTFD 135 [5.31] 7 [2.76] 74 [2.91] -1,4 +,3 P71 keyed S72 DIN 548 splined 54 [2.13] 74 [2.91] 18 -,551 [.71] 3 [.12] -,24 -,6 54 [2.13] -1,4 +,12 135 [5.31] -,551 +,5 -,3 +,13 -,8 ø 6 [2.36] Key size +,37 +,19 W7x3x22x7h [W2.76x.12x.28h] 18 [.71] wide -,1 -,6 Same dimensions as S71 +,14 +,7 -,4 -,23 12 [.47] thick 21 [.83] - 32 - S71 BS 355 splined Q71 Female splined 71 -,56 [2.8] 6 [2.36] 8 [.31] ø 54.2 [2.13] 17 [.67] 79 -,6 [3.11] -,22 ø 75f7 [2.95] -,326 ø 23 [7.99] 54 [2.13] 74 [2.91] 135 [5.31] -,551 +,28 +,7-1,4 ø 31.5 [11.87] S71 BS 355-1963 Pressure angle 3 Number of teeth 14 Pitch 6/12 Major diameter 62.553/62.425 [2.46] Form diameter 55.52 [2.17] Minor diameter 54.85/53.525 [2.13/2.11] Pin diameter 8.128 [.32] Diameter over pins 71.593/71.544 [2.82] Q71 BS 355 Pressure angle 3 Number of teeth 24 Pitch 12/24 Major diameter 53.246/52.916 [2.1/2.8] Minor diameter 48.811/48.684 [1.92] Pin diameter 3.658 [.14] Diameter between pins 45.626/45.55 [1.79]

YSTFD (HD) 125 YSTFD (HD) 125 ORDERING CODE **** *** *** *** *** *** *** ** - 33 - TYPE OF SWITCH VALVE ** - Null control Valve EK - Electromagnetic control valve MK - Manual Control Valve VARIABLE CONTROL DISTRIBUTOR SHAFT OPTIONS P - Parallel Keyed Shaft T - Cone Shaft S - Involute Spline Shaft Q - Internal Spline Shaft SMALL DISPLACEMENT LARGE DISPLACEMENT TYPE YSTFD (HD) model EXAMPLE YSTFD 125 2 1 S71 F2 L1A ** YSTFD-125-2-1-S71-F2-L1A-** Series YSTFD Type 125 Displacement 2/1 cc Shaft options S71 Port Size F2 Variable control L1A Type of switch valve ** www.yptius.com YSTFD

TECHNICAL SPECIFICATIONS YSTFD (HD) 125 www.yptius.com YSTFD Nominal displacement 21 2 18 16 15 13 12 1 83 67 51 35 19 11 Displacement ml/r 266 1973 1811 1649 1487 1325 1163 11 839 677 515 353 191 11 in 3 /r 126.1 12.4 11.5 118.9 9.7 8.8 7.9 61.1 51.2 41.3 31.4 21.5 11.6 6.6 Unit Torque N.m/Mpa 293 281 258 231 26 18 154 125 1 79 57 39 6 lb ft/psi 14.94 14.33 13.16 11.78 1.51 9.18 7.85 6.8 5.1 4.3 2.41 1.99.31 Max. Cont. Speed r/min 17 175 19 21 23 265 35 35 395 485 54 54 54 9 Max. Cont Power KW 91 89 83 77 71 66 6 55 48 42 33 16 3 HP 121.9 119.1 111.2 13.2 95.1 88.4 8.4 73.7 64.3 56.3 44.2 21.4 4. Max. Top Power KW 16 14 99 95 9 85 79 73 65 57 44 28 5 HP 142. 139.4 132.7 127.3 12.6 113.9 15.9 97.8 87.1 76.4 58.9 37.5 6,7 Max. Cont Pressure Mpa 21 21 21 21 21 21 21 21 21 21 21 21 21 15 PSI 345 345 345 345 345 345 345 345 345 345 345 345 345 2175 Max. Top Pressure Mpa 25 25 25 25 25 25 25 25 25 25 25 25 25 15 PSI 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 2175 DISPLACEMENT OPTIONS YSTFD (HD) 125 large displacement: 21, 2, 18, 16 small displacement: 16, 15, 13, 12, 1, 83, 67, 51, 35, 19, 11 F1 - L1C F2 - L1C FO1-L1A FO2-L1A FUNCTION SYMBOLS YSTFD (HD) 125-34 - F1 - L1D F2 - L1D F1 - L1B F2 - L1B

YSTFD (HD) 125 INSTALLATION DIMENSIONS WITH F2 DISTRIBUTOR 149.5 [5.89] 74 [2.91] 78.49 [3.9] 36.5 [1.44] 8-M16x55 2-ø38 [1.5] YSTFD (HD) 125 F1 DISTRIBUTOR MOUNTING DIMENSIONS ø 254 [1.] 37 [1.46] *1 UNF 3/4-16 drain port 2-G1/2 DRAIN PORT 52.5 [2.7] 36.5 [1.44] 58.7 [2.31] 79.4 [3.13] 85 [3.35] 2-ø32 [126] 8-M12 27 58.7 [2.31] ø 254 [1.] 79.4 [3.13] 52 [2.5] 4.5 [15.77] 477 [18.78] 23 [7.99] 333 [13.11] 425 [16.73] 46.5 [1.83] 3.2 [1.19] 3.2 [1.19] 33 [1.3] M2 3 [1.18] 21 [.83] 44.4 max [1.75] ø 26 [1.24] ø 381f7[15.] (ø31.5k7 [11.87] - 35-16 [6.29] ø 528 [22.64] 159 [6.26] 9 [3.54] 135.5 [5.33] 5-ø 21 [.83] Chioce mounting hole equi-spaced P.C. D ø 419.1 ±,2 [16.5 ±,79 ] 381f7 [15.] 147.96 [5.83] ø 473 max [18.62] Rotation direction Flow direction Flow direction Rotation direction 5-ø 21 [.83] Standard mounting hole equi-spaced P.C. D ø 327 ±,2 [12.87 ±,79 ] 31.5f7 VARIABLE CONTROL MOUNTING DATA 11 [.43] 13 [.51] VARIABLE CONTROL DIMENSIONS 27.2 [1.7] 17 [.67] 23 [7.99] 4 M5 2-G1/4 15 ø 22 [.86] 1 2-G1/4 15 ø 22 [.86] 1 32.5 [1.28] 31 [1.22] 12 [.47] 19 [,75] 11.25 [.44] 23 [7.99] 4.5 [1.59] www.yptius.com YSTFD

OUTPUT OPTIONS YSTFD (HD) 125 P71 keyed S71 BS 355 splined www.yptius.com YSTFD 9 [3.54] 97 [3.82] 3 [.12] S72 DIN 548 splined 76 [2.99] 97 [3.82] 144 [5.67] -1,5 -,591 24 [.94] 144 [5.67] +,33 +,13-1,5 -,591 -,7 -,28 77 [3.3] Key size +,66 24 [.94] wide +,5 16 [.63] thick ø 85 ±,1 [3.35] ±,4 W85x3x27x7h [W3.35x.12x1.6x.28h] Same dimension as S71 +,26 -,2-36 - 76 [2.99] 97 [3.82] 144 [5.67] -1,5 -,591 71 [2.8] Q71 Female splined 7 [.28] 67 [2.64] ø9f7 [3.54] -1,2 -,472 S71 BS 355-1963 Pressure angle 3 Number of teeth 2 Pitch 6/12 Major diameter 87.953/87.825 [3.46] Form diameter 8.264 [3.16] Minor diameter 79.485/78.925 [3.13/3.11] Pin diameter 8.128 [.32] Diameter over pins 97.84/97.3 [3.82] Q71 BS 355 Pressure angle 3 Number of teeth 32 Pitch 12/24 Major diameter 7.18/69.85 [2.76/2.75] Minor diameter 65.743/65.616 [2.59/2.58] Pin diameter 3.658 [.14] Diameter between pins 62.619/62.553 [2.47/2.46]

YSTFD (HD) 2 YSTFD (HD) 2 ORDERING CODE **** *** *** *** *** *** *** ** - 37 - TYPE OF SWITCH VALVE ** - Null control Valve EK - Electromagnetic control valve MK - Manual Control Valve VARIABLE CONTROL DISTRIBUTOR SHAFT OPTIONS P - Parallel Keyed Shaft T - Cone Shaft S - Involute Spline Shaft Q - Internal Spline Shaft SMALL DISPLACEMENT LARGE DISPLACEMENT TYPE YSTFD (HD) model EXAMPLE YSTFD 2 26 13 S71 F2 L1A ** YSTFD-2-26-13-S71-F2-L1A-** Series YSTFD Type 2 Displacement 26/13 cc Shaft options S71 Distributor F2 Variable control L1A Type of switch valve ** www.yptius.com YSTFD

TECHNICAL SPECIFICATIONS YSTFD (HD) 2 www.yptius.com YSTFD Nominal displacement 31 29 28 26 24 23 21 2 18 16 15 13 12 1 83 67 51 35 19 11 ml/r 38 2958 2796 2634 2472 231 2148 1973 1811 1649 1487 1325 1163 11 839 677 515 353 191 11 Displacement in 3 /R 187.9 18.5 17.6 16.7 156.8 14.9 131.1 12.4 11.5 1.6 9.7 8.8 7.9 61.1 51.2 41.3 31.4 21.5 11.6 6.6 N.m/ 447 422 4 375 351 326 3 281 258 231 26 18 154 125 1 79 57 3 6 Mpa Unit Torque lb ft/ 22.8 21.52 2.4 19.13 17.9 16.3 15.3 14.33 13.16 11.78 1.51 9.18 7.85 6.38 5.1 4.3 2.91 1.53.31 PSI Max.Cont.Speed r/min 11 115 125 135 14 15 16 175 19 21 23 265 35 35 395 485 54 54 54 9 Max. Cont Power Max. Top Power Max. Cont Pressure Max. Top Pressure large displacement: 31, 29, 28, 26, 24, 23, 21, 2, 18, 16 small displacement: 23, 21, 2, 18, 16, 15, 13, 12, 1, 83, 67, 51, 35, 19, 11 F1 - L1A F2 - L1A F1 - L1C F2 - L1C KW 11 11 11 15 1 96 92 89 83 77 71 66 6 55 48 42 33 16 3 HP 147.4 147.4 147.4 14.7 134. 128.6 123.3 119.3 111.2 13.2 95.1 88.4 8.4 73.2 64.3 56.3 44.2 21.4 4. KW 135 135 135 13 125 12 114 14 99 95 9 85 79 73 65 57 44 28 5 HP 18.9 18.9 18.9 174.2 167.5 16.8 152.8 139.4 132.7 127.3 12.6 113.9 15.9 97.8 87.1 76.3 58.9 37.5 6.7 Mpa 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 15 PSI 345 345 345 345 345 345 345 345 345 345 345 345 345 345 345 345 345 345 345 345 Mpa 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 15 PSI 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 2175 DISPLACEMENT OPTIONS FUNCTION SYMBOLS - 38 - F1 - L1B F2 - L1B F1 - L1D F2 - L1D YSTFD (HD) 2 YSTFD (HD) 2

YSTFD (HD) 2 INSTALLATION DIMENSIONS WITH F2 DISTRIBUTOR 149.5 [5.89] *1 UNF 3/4-16 drain port 2-G3/4 drain ports 52.5 [2.7] YSTFD (HD) 2 74 [2.91] 78.5 [3.9] F1 DISTRIBUTOR MOUNTING DIMENSIONS 37 [1.46] 36.5 [1.44] 8-M16 35 2-ø38 [1.5] ø 254 [1.] 58.7 [2.31] 79.4 [3.13] 36.5 [1.44] 85 [3.35] 58.7 [2.31] 2-ø32 [1.26] 8-M12 ø 254 [1.] 79.4 [3.13] 52 [2.5] 413.5 [16.28] 493 [19.41] 216 [8.5] 346 [13.62] 438 [17.28] 46.5 [1.83] 3.2 [1.19] 3.2 [1.19] 33 [1.3] M2 3 [1.18] 23 [.91] 32 max [1.26] ø 215 [8.46] -,24 -,47 ø 381f7 [15.] -,62 -,119-39 - 16 [6.3] ø 66 [25.98] 159 [6.26] 9 [3.54] 14.5 [5.53] 17.5 [6.71] ø 473 max [18.62] 5-ø 21 [.83] equi-spaced mounting hole P.C. D ø 419.1 ±,2 [16.5 ±,79 ] VARIABLE CONTROL DIMENSIONS Rotation direction Flow direction Flow direction Rotation direction VARIABLE CONTROL MOUNTING DATA 11 [.43] 13 [.51] 27.2 [1.7] 17 [.67] 2.16 [8.5] 4 M5 2-G1/4 15 ø 22 [.86] 1 2-G1/4 15 ø 22 [.86] 1 32.5 [1.28] 31 [1.22] 12 [.47] 19 [,75] 11.25 [.44] 2.16 [8.5] 4.5 [1.59] www.yptius.com YSTFD

OUTPUT OPTIONS YSTFD (HD) 2 P71 keyed S71 BS 355 splined www.yptius.com YSTFD 24 [.95] S72 DIN 548 splined 76 [2.99] 97 [3.82] 131 [5.16] +,33 9 [3.54] 97 [3.82] 131 [5.16] +,13-1,2 -,472-1,2 -,472 3 [.12] -,7 77 [3.3] -,28 Key size +,66 24 [.94] wide +,5 ø 85 ±,1 [3.35] ±,4 +,26 -,2 16 [.63] thick W85x3x27x7h [W3.35x.12x1.6x.28h] Same dimensions as S71-4 - 7 [.28] 76 [2.99] 97 [3.82] 131 [5.16] -1,2 -,472 Q71 Female splined +,5 +,2 ø76.7 [3.2] 25.4 [1.] 14.5 [4.11] ø8.5 [3.17] -1,1 -,433 S71 BS 355-1963 Pressure angle 3 Number of teeth 2 Pitch 6/12 Major diameter 87.953/87.825 [3.46] Form diameter 8.264 [3.16] Minor diameter 79.485/78.925 [3.13/3.11] Pin diameter 8.128 [.32] Diameter over pins 97.84/97.3 [3.82] Q71 BS 355 Pressure angle 3 Number of teeth 34 Pitch 12/24 Major diameter 74.414/74.18 [2.93/2.91] Minor diameter 69.977/69.85 [2.76/2.75] Pin diameter 3.658 [.14] Diameter between pins 66.744/66.815 [2.63]

YSTFD (HD) 27 YSTFD (HD) 27 ORDERING CODE **** *** *** *** *** *** *** ** - 41 - TYPE OF SWITCH VALVE ** - Null control Valve EK - Electromagnetic control valve MK - Manual Control Valve VARIABLE CONTROL DISTRIBUTOR SHAFT OPTIONS P - Parallel Keyed Shaft T - Cone Shaft S - Involute Spline Shaft Q - Internal Spline Shaft SMALL DISPLACEMENT LARGE DISPLACEMENT TYPE YSTFD (HD) model EXAMPLE YSTFD 27 41 19 S71 F2 L1A ** YSTFD-27-41-19-S71-F2-L1A-** Series YSTFD Type 27 Displacement 41/19 cc Shaft options S71 Port Size F2 Variable control L1A Type of switch valve ** www.yptius.com YSTFD

TECHNICAL SPECIFICATIONS YSTFD (HD) 27 www.yptius.com YSTFD Nominal displacement 46 41 36 33 3 26 23 19 16 14 97 68 34 17 Displacement ml/r 4597 486 3632 3291 2951 261 227 193 1646 1362 965 681 34 17 in 3 R 28.5 249.3 221.6 2.8 18.1 159.2 138.5 117.8 1.4 83.1 58.9 41.5 2.7 1.4 Unit Torque N.m/Mpa 657 585 514 46 419 356 31 259 21 168 18 73 24 lb ft/psi 33.51 29.83 26.21 23.46 21.37 18.16 15.81 13.21 1.71 8.57 5.51 3.72 1.22 Max. Cont. Speed r/min 18 12 135 145 165 18 215 24 29 315 315 315 315 9 Max. Cont Power KW 123 115 14 97 9 83 76 68 59 48 37 25 8 HP 164.8 154.1 139.4 129.9 12.6 111.2 11.8 91.1 79.1 64.3 49.6 33.5 1.7 Max. Top Power KW 153 149 142 136 129 122 112 12 91 81 68 47 12 HP 25. 199.7 19.3 182.2 172.9 163.5 15.1 136.7 121.9 18.5 91.1 62.9 16.1 Max. Cont Pressure Mpa 21 21 21 21 21 21 21 21 21 21 21 21 21 15 PSI 345 345 345 345 345 345 345 345 345 345 345 345 345 2175 Max. Top Pressure Mpa 25 25 25 25 25 25 25 25 25 25 25 25 25 15 PSI 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 2175 DISPLACEMENT OPTIONS YSTFD (HD) 27 large displacement: 46, 41, 36, 33 small displacement: 33, 3, 26, 23, 19, 16, 14, 97, 68, 34, 17 F3 - L2C F3 - L2A FUNCTION SYMBOLS YSTFD (HD) 27-42 - F3 - L2D F3 - L2B

YSTFD (HD) 27 INSTALLATION DIMENSIONS WITH F3 DISTRIBUTOR 149.5 [5.89] 78.5 [3.9] *1 UNF 3/4-16 drain port 2-G3/4 drain port 52.5 [2.7] 36.5 [1.44] 36.5 [1.44] 79.4 [3.13] 8-M16 35 2-ø38 [1.5] ø 311 [12.24] 79.4 [3.13] 51 [2.1] 232 [9.13] 428.5 [16.87] 51 [2.8] 35 [1.38] YSTFD (HD) 27 13 [.52] 6.5 [.26] 2-G1/4 2.8 [.82] 1.7 [.42] 232 [9.13] M2 3 [1.18] 24 [.94] 37 max [1.46] ø 255 [1.4] -,59 -,28 ø 457 [17.99] -,15 -,7 16 [6.3] - 43 - ø 712 [28.3] 187 [7.36] 9 [3.54] 174 [6.85] 22 [8.66] ø 57 max [22.44] 4 M5 2-G1/4 7-ø 21 [.87] equi-spaced mounting hole P.C. D ø 52.7 ±,2 [2.47 ±,79 ] 32.5 [1.28] 31 [1.22] 11.5 [.45] 1.75 [.42] Rotation direction Flow direction 232 [9.13] Flow direction Rotation direction VARIABLE CONTROL MOUNTING DATA 19 [,75] 4.5 [1.59] www.yptius.com YSTFD

OUTPUT OPTIONS YSTFD (HD) 27 P71 keyed S71 BS 355 splined www.yptius.com YSTFD -,52 25 [.98] 95.5 [3.76] 11.6 [4.] 139.5 [5.49] -,2 3 [.12] -,157 72 [2.83] -,4 -,79 81 [3.19] -,2 +,8 -,4 ø 9 [3.54] +,2 -,1 Key size -,52 -,2 25 [.98] wide 14 [.55] thick S72 DIN 548 splined 139.5 [5.49] 76 [2.99] 11.6 [4.] -1,3 -,512 -,11 -,43 W9x4x21x7h [W3.54x.16x.83x.28h] Same dimensions as S71-44 - 5.8 [2.] 139.5 [5.49] -1,5 Q71 Female splined 85.6 [3.37] -,591 76 [2.99] 11.6 [4.] -1,3 -,512 6.4 [.25] Q71 DIN 548 W75x3x24x9h [W2.95x.13x.94x.35h] ø76.7 [3.2] S71 BS 355-1963 Pressure angle 3 Number of teeth 2 Pitch 6/12 Major diameter 87.953/87.825 [3.46] Form diameter 8.264 [3.16] Minor diameter 79.485/78.925 [3.13/3.11] Pin diameter 8.128 [.32] Diameter over pins 97.84/97.3 [3.82]

YSTFD (HD) 325 YSTFD (HD) 325 ORDERING CODE **** *** *** *** *** *** *** ** - 45 - TYPE OF SWITCH VALVE ** - Null control Valve EK - Electromagnetic control valve MK - Manual Control Valve VARIABLE CONTROL DISTRIBUTOR SHAFT OPTIONS P - Parallel Keyed Shaft T - Cone Shaft S - Involute Spline Shaft Q - Internal Spline Shaft SMALL DISPLACEMENT LARGE DISPLACEMENT TYPE YSTFD (HD) model EXAMPLE YSTFD 325 S71 F3 L2A ** YSTFD-325- - -S71-F3-L2A-** Series YSTFD Type 325 Displacement / cc Shaft options S71 Port Size F3 Variable control L2A Type of switch valve ** www.yptius.com YSTFD

TECHNICAL SPECIFICATIONS YSTFD (HD) 325 www.yptius.com YSTFD Nominal displacement 53 51 49 36 33 3 26 23 19 16 15 14 Displacement ml/r 5335 518 4937 3632 3291 2951 261 227 193 1646 1532 1362 in 3 R 325.5 311.5 31.7 221.6 2.8 18. 159.2 138.5 117.8 1.4 93.5 83.1 Unit Torque N.m/Mpa 763 731 76 514 46 419 356 31 259 21 196 168 lb ft/psi 38.91 37.28 36. 26.21 23.46 21.37 18.16 15.81 13.21 1.71 1. 8.57 Max. Cont. Speed r/min 9 15 11 135 145 165 18 215 24 29 315 315 Max. Cont Power KW 123 123 123 14 97 9 83 76 68 59 54 48 HP 164.8 164.8 164.8 139.4 129.9 12.6 111.2 11.8 91.1 79.1 72.4 64.3 Max. Top Power KW 153 153 153 142 136 129 122 112 12 91 87 81 HP 25. 25. 25. 19.3 182.2 172.9 163.5 15.1 136.7 121.9 116.6 18.5 Max. Cont Pressure Mpa 21 21 21 21 21 21 21 21 21 21 21 15 PSI 345 345 345 345 345 345 345 345 345 345 345 2175 Max. Top Pressure Mpa 25 25 25 25 25 25 25 25 25 25 25 15 PSI 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 3625 2175 DISPLACEMENT OPTIONS YSTFD (HD) 325 large displacement: 53, 51, 49 small displacement: 36, 33, 3, 26, 23, 19, 16, 15, 14 F3 - L2C F3 - L2A FUNCTION SYMBOLS YSTFD (HD) 325-46 - F3 - L2D F3 - L2B

YSTFD (HD) 325 INSTALLATION DIMENSIONS WITH F3 DISTRIBUTOR 149.5 [5.89] 78.5 [3.9] *1 UNF 3/4-16 drain port 2-G3/4 drain port 36.5 [1.44] 79.4 [3.13] 8-M16x35 2-ø38 [1.5] 52.5 [2.7] 36.5 [1.44] ø 311 [12.24] 79.4 [3.13] 51 [2.1] 232 [9.13] 428.5 [16.87] 51 [2.8] 35 [1.38] YSTFD (HD) 325 13 [.52] 6.5 [.26] 2-G1/4 2.8 [.82] 1.7 [.42] 232 [9.13] M2 3 [1.18] 24 [.94] 37 max [1.46] ø 255 [1.4] -,59 -,28 ø 457 [17.99] -,15 -,7 16 [6.3] - 47 - ø 746 [29.37] 187 [7.36] 9 [3.54] 174 [6.85] 22 [8.66] ø 57 max [22.44] 4 M5 2-G1/4 7-ø 21 [.87] equi-spaced mounting hole P.C. D ø 52.7 ±,2 [2.47 ±,79 ] 32.5 [1.28] 31 [1.22] 11.5 [.45] 1.75 [.42] Rotation direction Flow direction 232 [9.13] Flow direction Rotation direction VARIABLE CONTROL MOUNTING DATA 19 [,75] 4.5 [1.59] www.yptius.com YSTFD

OUTPUT OPTIONS YSTFD (HD) 325 www.yptius.com YSTFD -,52 25 [.98] 95.5 [3.76] 11.6 [4.] 139.5 [5.49] -,2 3 [.12] -,157 72 [2.83] -,4 P71 keyed -,79 81 [3.19] -,2 +,8 -,4 ø 9 [3.54] +,2 -,1 Key size -,52 -,2 25 [.98] wide 14 [.55] thick S72 DIN 548 splined Q p 139.5 [5.49] 76 [2.99] 11.6 [4.] -1,3 -,512 -,11 -,43 W9x4x21x7h [W3.54x.16x.83x.28h] Same dimensions as S71-48 - 5.8 [2.] 139.5 [5.49] -1,5 S71 BS 355 splined Q71 Female splined 85.6 [3.37] -,591 76 [2.99] 11.6 [4.] -1,3 -,512 6.4 [.25] Q71 DIN 548 W75x3x24x9h [W2.95x.13x.94x.35h] ø76.7 [3.2] S71 BS 355-1963 Pressure angle 3 Number of teeth 2 Pitch 6/12 Major diameter 87.953/87.825 [3.46] Form diameter 8.264 [3.16] Minor diameter 79.485/78.925 [3.13/3.11] Pin diameter 8.128 [.32] Diameter over pins 97.84/97.3 [3.82]

YITM CONTENTS Technical specifications page 5 YITM 1 page 52 YITM 2 page 54 YITM 3 page 56 YITM 6 page 58 YITM 8 page 62 YITM 11 page 64 YITM 16 page 68 YITM 31 page 72 YITM 7 page 76 YITM 1 page 78 Distributor Option page 79 Port Orientation page 8 Ordering Code page 81-49 - THE YITM Series motors superior performance and high efficiency come from the roller bearing connection between the piston and the crankshaft. This reduces the friction to a minimum, increase efficiency and speed resulting in longer life. This series performance is enhanced due to special piston seals, hydraulically balanced Distributor, resulting in high efficiency and smooth consistent output torque. With 16 frames and a total of 59 displacements the YITM series is one of the largest and most complete series of radial piston motors available on the market today. With displacements from 3.9 CU. to 978 Cu.ln/Rev (64 to 1639 CC Rev.) torques from 116 to 34.21 Lf-Ft (189 to 46429 Nm) and speed from.3 to 9 RPM this series can deliver the performance required of most applications. www.yptius.com YITM

YITM TECHNICAL SPECIFICATIONS TYPE MAIN SPECIFICATION Displacement Pressure Torque Speed Weight Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM1-63 64 3.9 2 29 28 46 189 139 9.46 17 23 15 ~ 9 YITM1-8 78 4.8 2 29 28 46 22 162 11.56 19 25 15 ~ 8 YITM1-1 96 5.9 2 29 28 46 28 27 14.71 22 29 15 ~ 75 21 46 YITM1-125 126 7.7 16 232 24 348 34 224 19.97 18 24 15 ~ 6 YITM1-16 159 9.7 16 232 24 348 368 272 23 1.17 17 23 15 ~ 45 YITM2-1 113 6.9 2 29 28 46 33 244 17.87 24 32 15 ~ 7 YITM2-15 159 9.7 2 29 28 46 47 347 23 1.17 32 43 15 ~ 65 www.yptius.com YITM YITM2-175 18 11. 2 29 24 348 541 399 27 1.38 33 44 15 ~ 6 YITM2-2 26 12.6 16 232 24 348 489 361 3 1.53 28 38 8 ~ 55 YITM2-25 235 14.3 16 232 2 29 567 418 35 1.78 29 39 8 ~ 5 YITM2-28 276 16.8 16 232 2 29 661 488 41 2.9 31 42 8 ~ 45 YITM3-175 181 11. 2 29 3 435 55 46 27 1.38 58 78 8 ~ 1 YITM3-2 21 12.3 2 29 3 435 6 443 3 1.53 48 64 8 ~ 8 YITM3-25 254 15.5 2 29 3 435 761 562 38 1.94 49 66 8 ~ 63 YITM3-3 289 17.6 2 29 25 3625 864 638 43 2.19 43 58 6 ~ 5 YITM3-35 34 2.7 16 232 25 3625 813 66 5 2.55 33 44 6 ~ 4 YITM3-4 38 23.2 16 232 2 29 91 665 56 2.86 37 5 6 ~ 4 YITM6-4 397 24.2 2 29 3 435 1185 875 59 3.1 61 82 5 ~ 5 YITM6-45 452 27.6 2 29 3 435 1342 99 67 3.42 63 84 5 ~ 45 YITM6-5 491 3. 2 29 25 3625 1463 18 73 3.72 69 96 5 ~ 45 YITM6-6 594 36.2 18 261 22 319 1775 131 88 4.49 78 15 4 ~ 42 YITM6-7 683 41.7 16 232 2 29 1616 1193 11 5.15 69 92 4 ~ 4 YITM6-75 754 46. 16 232 2 29 176 1299 11 5.61 59 79 4 ~ 32 YITM8-6 617 37.6 25 3625 32 464 2282 1684 91 4.64 119 159 4 ~ 5 YITM8-7 71 43.3 25 3625 32 464 2626 1938 15 5.35 11 147 4 ~ 4 YITM8-8 81 49.4 2 29 25 3625 2396 1768 119 6.7 1 134 4 ~ 4 YITM8-9 889 54.2 2 29 25 3625 2629 194 131 6.68 94 126 3 ~ 35 YITM8-1 1 61. 16 232 2 29 2366 1746 147 7.5 74 99 3 ~ 3-5 - 28 67 36 79 58 128 72 158

TECHNICAL SPECIFICATIONS YITM TYPE MAIN SPECIFICATION Displacement Pressure Torque Speed Weight Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM11-7 682 41.6 25 3625 3 435 2511 1853 1 5.1 15 141 4 ~ 4 YITM11-8 782 47.7 25 3625 3 435 293 2142 116 5.91 121 162 4 ~ 4 YITM11-9 894 54.5 25 3625 3 435 3311 2444 132 6.73 138 185 4 ~ 4 YITM11-1 981 59.9 2 29 25 3625 2917 2153 145 7.39 95 127 3 ~ 32 95 29 YITM11-11 114 67.4 2 29 25 3625 338 2441 165 8.41 111 149 3 ~ 32 YITM11-12 1234 75.3 2 29 25 3625 3657 2699 182 9.28 119 159 3 ~ 32 YITM11-13 131 79.4 16 232 2 29 38 2273 192 9.79 8 17 3 ~ 25 YITM16-14 1413 86.2 2 29 3 435 4191 393 21 1.71 175 235 2 ~ 4 YITM16-16 1648 1.5 2 29 3 435 4881 362 244 12.44 197 264 2 ~ 4 YITM16-18 1814 11.7 18 261 25 3625 487 3594 268 13.69 161 216 2 ~ 32 YITM16-2 234 124.1 16 232 25 3625 4826 3562 31 15.35 157 21 2 ~ 32 YITM16-24 2267 138.3 16 232 2 29 5374 3966 335 17.8 137 184 2 ~ 25 YITM31-25 2553 155.7 25 3625 32 464 9523 728 38 19.38 249 334 2 ~ 25 YITM31-28 2683 163.7 25 3625 32 464 149 7416 41 2.45 27 277 1 ~ 2 YITM31-3 363 186.9 2 29 25 3625 9189 6782 459 23.41 191 256 1 ~ 2 YITM31-315 3218 196.3 2 29 25 3625 961 786 48 24.48 196 263 1 ~ 2 YITM31-35 3462 211.2 2 29 25 3625 122 7542 511 26.6 171 229 1 ~ 16 YITM31-4 4152 253.3 2 29 25 3625 12481 9211 624 31.82 25 275 1 ~ 16 YITM31-5 4828 294.6 16 232 2 29 11449 8449 715 36.46 187 251 1 ~ 16 YITM7-5 4946 31.8 2 29 25 3625 14626 1794 731 37.28 22 295 1 ~ 16 YITM7-54 5452 332.6 2 29 25 3625 16125 119 86 41.1 243 326 1 ~ 16 YITM7-6 5984 365.1 2 29 25 3625 17697 1361 885 45.13 28 279.5 ~ 125 YITM7-63 654 399. 18 261 22.5 3262 1748 12847 967 49.32 25 275.5 ~ 125 YITM7-7 7122 434.5 16 232 2 29 16849 14649 153 53.7 198 265.5 ~ 125 YITM1-63 6758 412.3 2 29 25 3625 1934 14273 967 49.32 226 33.5 ~ 125 YITM1-7 739 45.8 2 29 25 3625 2116 15616 158 53.96 248 332.5 ~ 125 YITM1-8 7985 487.2 2 29 25 3625 22896 16897 1145 58.39 269 36.5 ~ 125 YITM1-9 8636 526.9 2 29 25 3625 2474 18258 1237 63.9 29 389.5 ~ 125 YITM1-1 116 611.1 18 261 25 3625 25758 191 1431 72.98 245 328.5 ~ 1 YITM16-125 13333 813.5 2 29 25 3625 3946 29122 1973 1.62 331 444.3 ~ 8 YITM16-16 1639 978.6 2 29 25 3625 4642 34258 2321 118.37 36 41.3 ~ 8-51 - 17 374 298 656 55 121 83 1826 1 22 www.yptius.com YITM

YITM 1 YITM 1 TECHNICAL SPECIFICATIONS Displacement Pressure Torque Speed Weight TYPE Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM1-63 64 3.9 2 29 28 46 189 139 9.46 17 23 15 ~ 9 YITM1-8 78 4.8 2 29 28 46 22 162 11.56 19 25 15 ~ 8 YITM1-1 96 5.9 2 29 28 46 28 27 14.71 22 29 15 ~ 75 YITM1-125 126 7.7 16 232 24 348 34 224 19.97 18 24 15 ~ 6 YITM1-16 159 9.7 16 232 24 348 368 272 23 1.17 17 23 15 ~ 45 21 46 YITM 1 INSTALLATION DIMENSIONS www.yptius.com YITM 2-G3/4 13 [4.5] 56 [2.2] 55.5 [2.19] G1/4 YITM 1 P11 1 parallel key 29 [1.14] 23.5 [.93] 175.5 [6.91] 2-ø 11 [.43] Equi-spaced Mounting holes P.C. D ø 16.4 ±,2 [4.19 ±,79 ] 35 [1.38] 6.38h9 [.25] 4 [.16] 6 [.24] 54 [2.13] ø25.4f7 [1.] 28 [1.1] ø 82.55 [3.25 ] -,13 -,51 26 [1.2] 8 [.31] 18 [.71] M8-52 - 72 [2.83] ø 238 [9.37] 65 [2.56] OUTPUT OPTIONS P12 35 mm parallel key 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 16 ±,2 [6.3 ±,79 ] 4 [1.57] 44 [1.73] 62 [2.44] 1h9 [.39] ø35f7 [1.38] 2 [.8] 38 [1.5] Rotation direction Flow direction Flow direction Rotation direction ø 92 [3.62] ø 125f7 [4.92]

YITM 1 P13 25 mm parallel key OUTPUT OPTIONS P14 35 mm parallel key 4-ø 11 [.43] Equi-spaced Mounting holes P.C. D ø 15 ±,1 [4.13 ±,39 ] 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 16 ±,2 [6.3 ±,79 ] 4 [1.57] 4 [.16] 8 h9 [.31] ø25f7 [.98] 28 [1.1] ø 125f7 [4.92] 4 [1.57] 8 h9 [.31] ø25f7 [.98] 28 [1.1] 37 [1.46] ø 92 [3.62] ø 125f7 [4.92] 1 [.39] 55 [2.17] 55 [2.17] 22 [.87] S15 6-3b12x25bx12x6f8 involute spline 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 16 ±,2 [6.3 ±,79 ] 51 [2.1] 6-3b12x25b12x6f8 22 [.87] 33 [1.3] ø 92 [3.62] ø 125f7 [4.92] - 53 - www.yptius.com YITM

YITM 2 YITM 2 TECHNICAL SPECIFICATIONS TYPE Displacement Pressure Torque Speed Weight Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM2-1 113 6.9 2 29 28 46 33 244 17.87 24 32 15 ~ 7 YITM2-15 159 9.7 2 29 28 46 47 347 23 1.17 32 43 15 ~ 65 YITM2-175 18 11. 2 29 24 348 541 399 27 1.38 33 44 15 ~ 6 YITM2-2 26 12.6 16 232 24 348 489 361 3 1.53 28 38 8 ~ 55 YITM2-25 235 14.3 16 232 2 29 567 418 35 1.78 29 39 8 ~ 5 YITM2-28 276 16.8 16 232 2 29 661 488 41 2.9 31 42 8 ~ 45 28 67 YITM 2 INSTALLATION DIMENSIONS www.yptius.com YITM 35 [1.38] 2-G3/4 13 [4.6] 56 [2.2] 23.5 [.93] 55.5 [2.19] G1/4 182.5 [7.19] YITM 2 P21 1. parallel key 4-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 16 ±,2 [6.3 ±,79 ] 35 [1.38] 42.4 [1.67] 5 [.2] 51 [2.1] 6.38 h9 [.25] 4 [.16] ø 25.4 [1.] 28 [1.1] ø 125 f7 [4.42] 13 [.51] 18 [.71] 3 [1.18] M8 8 [3.15] ø 254 [1.] - 54-65 [2.56] OUTPUT OPTIONS 45.3 [1.78] Rotation direction Flow direction Flow direction Rotation direction P22 1.25: parallel key 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 16 ±,2 [6.3 ±,79 ] 35 [1.38] 6 [.24] 8 h9 [.31] 2.2 [.8] ø 31.75 f7 [1.25] 35.1 [1.38] ø 13 f7 [5.12]

YITM 2 P23 25 mm parallel key 4-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 16.35 ±,2 [4.19 ±,79 ] OUTPUT OPTIONS P24 4 mm parallel key 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 18 ±,2 [7.9 ±,79 ] 4 [1.57] 4 [.16] 5 [.2] 8 h9 [.31] ø 25 f7 [.96] 28 [1.1] ø 82.55 f7 [3.25] 45 [1.77] 4 [.16] 56.5 [2.22] 12h9 [.47] ø 4f7 [1.57] 43 [1.69] ø 12 [4.72] ø 162f7 [6.38] 45[1.77] 54 [2.13] 72 [2.83] 35[1.35] FS28 6-48h11x42h11x12d9 female spline 3 [1.18] P25 4 mm parallel key 4-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø D ±,2 [ ±,79 ] 5 [1.97] 5 [.2] 66 [2.6] 1-ø 9 [.35] Equi-spaced Mounting holes P.C. D ø 165 ±,2 [6.5 ±,79 ] 6-48H11x42H11x12D9 3 [1.18] 12 h9 [.47] ø 4f7 [1.57] 4 [.16] 45 [1.77] 5 [.2] 41 [1.61] 43 [1.69] ø D 1 f7 D D 1 mm inch mm inch B 1 16 6.3 125 4.92 B 2 127 5. 1 3.4 ø 6f7 [2.36] ø 13 g7 [5.12] S26 involute spline 6-3b12x25bx12x6f8 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 18 ±,2 [7.9 ±,79 ] 6-3b12x25b12x6f8 36 [1.42] 53 [2.9] 56.5 [2.22] 72 [2.83] - 55 - ø 12 [4.72] ø 162f7 [6.38] FS29 6-48h11x42h11x12d9 female spline 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 18 ±,2 [7.9 ±,79 ] 45 [1.77] 53,2 [2.9] 71 [2.8] 25 [.98] S27 involute spline 6-34d11x28d11x7f8 6-48H11x42H11x12D9 3 [1.18] ø 6f7 [2.36] 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 21 ±,2 [8.27 ±,79 ] 3 [.12] ø 12 [4.72] 6-34d11x28d11x7f8 ø 162f7 [6.38] 22 [.87] 42 [1.65] ø 175f7 [6.89] www.yptius.com YITM

YITM 3 YITM 3 TECHNICAL SPECIFICATIONS TYPE Displacement Pressure Torque Speed Weight Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM3-175 181 11. 2 29 3 435 55 46 27 1.38 58 78 8 ~ 1 YITM3-2 21 12.3 2 29 3 435 6 443 3 1.53 48 64 8 ~ 8 YITM3-25 254 15.5 2 29 3 435 761 562 38 1.94 49 66 8 ~ 63 YITM3-3 289 17.6 2 29 25 3625 864 638 43 2.19 43 58 6 ~ 5 YITM3-35 34 2.7 16 232 25 3625 813 66 5 2.55 33 44 6 ~ 4 YITM3-4 38 23.2 16 232 2 29 91 665 56 2.86 37 5 6 ~ 4 36 79 YITM 3 INSTALLATION DIMENSIONS www.yptius.com YITM 2-G3/4 13 [4.6] 56 [2.2] 23.5 [.93] 55.5 [2.19] 196.5 [7.74] YITM 3 P31 38 mm parallel key 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 21 ±,2 [8.27 ±,79 ] 45 [1.77] 57 [2.24] 58 [2.28] 79 [3.11] 1h9 [.39] ø 38f7 [1.5] 5 [.2] 41 [1.61] ø 134 [5.28] ø 19f7 [7.48] 13 [.51] 18 [.71] 3 [1.18] M8 84 [3.31] ø 298 [11.73] - 56-65 [2.56] 76.5 [3.1] G3/8 OUTPUT OPTIONS Rotation direction Flow direction Flow direction Rotation direction P32 4 mm parallel key 36 [1.42] 4-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 21 ±,2 [8.27 ±,79 ] 5 [1.97] 4 [.16] 5 [.2] 65 [2.56] 12 h9 [.47] ø4f7 [1.57] 43 [1.69] ø 125f7 [4.92]

YITM 3 P33 4 mm parallel key 4-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 16 ±,2 [6.3 ±,79 ] OUTPUT OPTIONS P34 5 mm parallel key 2-ø 17 [.67] Equi-spaced Mounting holes P.C. D ø 2 ±,2 [7.87 ±,79 ] 7 [2.76] 12 h9 [.47] 5 [1.97] 14 h9 [.55] 84 [3.31] ø 4 f7 [1.57] 43 [1.69] ø 125 [4.92] 4 [.16] ø 5 f7 [1.97] 53.5 [2.11] ø 16f7 [6.3] 5 [.2] 5 [.2] 113 [4.45] 85 [3.35] 36 [1.42] 37 [1.46] 2 [.79] S35 8-4d11x36d11x7f8 36 [1.42] 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 195 ±,2 [7.68 ±,79 ] 48 [1.89] 5 [.2] 8-4d11x36d11x7f8 72 [2.83] S37 6-34d11x28d11x7f8 3 [.12] 22 [.87] 42 [1.65] ø 175f7 [6.87] ø 15f7 [5.91] 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 21 ±,2 [8.27 ±,79 ] 6-34d11x28d11x7f8 FS38 female spline 6-48h11x42h11x12d9 24 [.94] 1-ø 11 [.43] Equi-spaced Mounting holes P.C. D ø 22 ±,2 [8.66 ±,79 ] 6-48H11x42H11x12D9 5 [.2] 35 [1.38] 5 [1.97] 36 [1.42] ø 6f7 [2.36] - 57 - ø 2 [7.89] S36 8-38bx32b12x6f8 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 21 ±,2 [8.27 ±,79 ] 57 [2.24] 58 [2.28] 79 [3.11] 8-38b12x32b12x6f8 38 [1.5] ø 134 [5.28] FS39 female spline 6-48h11x42h11x12d9 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 21 ±,2 [8.27 ±,79 ] 6-48H11x42H11x12D9 3 [1.18] 4 [1.57] 6 [.24] 27 [1.6] ø 19 [7.48] ø 6f7 [2.36] ø 134 [5.28] ø 19f7 [7.48] www.yptius.com YITM

YITM 6 YITM 6 TECHNICAL SPECIFICATIONS TYPE Displacement Pressure Torque Speed Weight Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM6-4 397 24.2 2 29 3 435 1185 875 59 3.1 61 82 5 ~ 5 YITM6-45 452 27.6 2 29 3 435 1342 99 67 3.42 63 84 5 ~ 45 YITM6-5 491 3. 2 29 25 3625 1463 18 73 3.72 69 96 5 ~ 45 YITM6-6 594 36.2 18 261 22 319 1775 131 88 4.49 78 15 4 ~ 42 YITM6-7 683 41.7 16 232 2 29 1616 1193 11 5.15 69 92 4 ~ 4 YITM6-75 754 46. 16 232 2 29 176 1299 11 5.61 59 79 4 ~ 32 58 128 YITM 6 INSTALLATION DIMENSIONS www.yptius.com YITM 13 [4.6] 2-G3/4 Standard 56 [2.2] 23.5 [.93] 55.5 [2.19] 22.5 [8.68] YITM 6 14 [.55] 21 [.83] P61 42 mm parallel key 5-ø 16 [.63] Equi-spaced Mounting holes P.C. D ø 254 ±,2 [1 ±,79 ] 5 [1.97] 6 [.24] 63 [2.48] 69.5 [2.74] 9 [3.54] 12h9 [.47] ø42f7 [1.63] 45 [1.77] ø15 [5.91] ø23f7 [9.6] M14 36 [1.42] 99 [3.9] ø392 [15.43] - 58-65 [2.56] 89 [3.5] OUTPUT OPTIONS 38 [1.5] 2-G1/2 drain port Rotation direction Flow direction Flow direction Rotation direction P62 5 mm parallel key 4-ø 17 [.67] Equi-spaced Mounting holes P.C. D ø 2 ±,2 [7.87 ±,79 ] 5 [1.97] 4 [.16] 6 [.24] 85 [3.35] 14h9 [.55] ø5f7 [1.97] 53.5 [2.11] ø 16 f7 [6.3]

YITM 6 P63 5 mm parallel key 5-ø 18 [.71] Equi-spaced Mounting holes P.C. D ø 26 ±,2 [1.24 ±,79 ] OUTPUT OPTIONS P64 5 mm parallel key 3-ø 21 [.83] Equi-spaced Mounting holes P.C. D ø 2 ±,2 [7.87 ±,79 ] 9 [3.54] 12h9 [.47] -,7 -,23 7 [2.76] 14h9 [.55] 5 [.2] ø5f7 [1.97] 53.5 [2.11] -,17 ø 2 -,59 [7.87] 5 [.2] ø5f7 [1.97] 53.5 [2.11] ø 152.4 g8 [6.] 5 [.2] 6 [.24] 86 [3.39] 91 [3.58] 36 [1.42] 43 [1.69] S66 8-4d11x36d11x7f8 5-ø 16 [.63] Equi-spaced Mounting holes P.C. D ø 254 ±,2 [1 ±,79 ] 43 [1.69] 63 [2.48] 69.5 [2.74] 9 [3.54] 8-42b12x36b12x7f8 ø15 [5.91] ø23f7 [9.6] S67 8-54d11x46g7x9f8 38 [1.5] 5-ø 13 [.63] Equi-spaced Mounting holes P.C. D ø 195 ±,2 [7.68 ±,79 ] 48 [1.89] 5 [.2] 72 [2.83] 8-4d11x36d11x7f8 ø 15 f7 [5.71] - 59 - S65 8-42b12x36b12x7f8 38 [1.5] 5-ø 16 [.63] Equi-spaced Mounting holes P.C. D ø 25 ±,2 [9.84 ±,79 ] 48 [1.89] 5.3 [.21] 72 [2.83] 8-4d11x36d11x7f8 ø 15 f7 [5.91] S68 8-54d11x46g7x9f8 5-ø 13 [.51] Equi-spaced Mounting holes P.C. D ø 266 ±,2 [1.47 ±,79 ] 8-54d11x46g7x9f8 56.5 [2.22] 8 [.31] 72 [2.83] 25 [.98] ø 19 f7 [7.48] www.yptius.com YITM

YITM 6 S69 8-6b12x52b12x9f8 5-ø 13 [.57] Equi-spaced Mounting holes P.C. D ø 29 ±,2 [11.42 ±,79 ] OUTPUT OPTIONS FS61 6-55h11x5h11x14d9 female spline 5-ø 16 [.63] Equi-spaced Mounting holes P.C. D ø 254 ±,2 [1 ±,79 ] 6-55H11x5H11x14D9 8-6b12x52b12x9f8 6 [2.36] ø 22 f6 [8.66] 4 [1.57] 7 [.28] ø 7 f7 [2.75] ø 115 [4.53] ø23f7 [9.6] 1 [.39] 54 [2.13] 3 [1.18] 11 [3.98] 28 [1.1] www.yptius.com YITM FS611 6-7-h11x62h16d9 female spline 33 [1.3] 1-ø11 [.43] Equi-spaced Mounting holes P.C. D ø 22 ±,2 [8.66 ±,79 ] 35 [1.38] 5 [.2] 6-7h11x62h16D9 ø 85 f7 [3.35] 55 [2.17] 36 [1.42] ø 16 f7 [6.3] - 6 -

TESTING Rigorous testing of new products and production guarantees our customers products of the highest quality. Our products are tested 1% prior to shipping. - 61 - www.yptius.com

YITM 8 YITM 8 TECHNICAL SPECIFICATIONS TYPE Displacement Pressure Torque Speed Weight Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM8-6 617 37.6 25 3625 32 464 2282 1684 91 4.64 119 159 4 ~ 5 YITM8-7 71 43.3 25 3625 32 464 2626 1938 15 5.35 11 147 4 ~ 4 YITM8-8 81 49.4 2 29 25 3625 2396 1768 119 6.7 1 134 4 ~ 4 YITM8-9 889 54.2 2 29 25 3625 2629 194 131 6.68 94 126 3 ~ 35 YITM8-1 1 61. 16 232 2 29 2366 1746 147 7.5 74 99 3 ~ 3 72 158 YITM 8 INSTALLATION DIMENSIONS ø396 [15.59] www.yptius.com YITM 128 [5.4] 2-G1 Standard 69 [2.79] 31 [1.22] 72 [2.83] 243 [9.57] 25 [.98] YITM 8 15 [,59] P81 42 mm parallel key 5-ø 16 [.63] Equi-spaced Mounting holes P.C. D ø 254 ±,2 [1. ±,79 ] 5 [1.97] 63 [2.48] 16 [.63] 89.5 [3.52] 12h9 [.47] ø 42f7 [1.65] 45 [1.77] ø 23 f7 [9.6] M14 3 [1.18] 12 [4.2] - 62-68 [2.68] 89 [3.5] 2-G1/2 drain port OUTPUT OPTIONS Rotation direction Flow direction Flow direction Rotation direction P82 54 mm parallel key 5-ø 17 [.67] Equi-spaced Mounting holes P.C. D ø 3 ±,2 [11.81 ±,79 ] 8 [3.15] 5 [.2] 9 [3.54] 1.2 [3.94] 122.5 [4.82] ø 54f7 [2.13] 57 [2.24] 14h9 [.55] ø 178 [7.1] ø 256 f7 [1.8]

YITM 8 S83 8-42b12x36b12x7f8 5-ø 16 [.63] Equi-spaced Mounting holes P.C. D ø 254,2 [1. ±,79 ] 8-42b12x36b12x7f8 OUTPUT OPTIONS S84 8-5b12x46b12x9f8 5-ø 17 [.67] Equi-spaced Mounting holes P.C. D ø 3 ±,2 [11.81 ±,79 ] +,1 5.3 [.21] +,1 4.7 [.18] +,39 +,39 43 [1.69] 63 [2.48] ø 23 f7 [9.6] 8-5b12x46b12x9f8 5 [1.97] 7 [2.76] ø 178 [7.1] ø 256 f7 [1.8] 16 [.63] 89.5 [3.52] 8.2 [3.16] 12.5 [4.4] - 63 - www.yptius.com YITM

YITM 11 YITM 11 TECHNICAL SPECIFICATIONS TYPE Displacement Pressure Torque Speed Weight Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM11-7 682 41.6 25 3625 3 435 2511 1853 1 5.1 15 141 4 ~ 4 YITM11-8 782 47.7 25 3625 3 435 293 2142 116 5.91 121 162 4 ~ 4 YITM11-9 894 54.5 25 3625 3 435 3311 2444 132 6.73 138 185 4 ~ 4 YITM11-1 981 59.9 2 29 25 3625 2917 2153 145 7.39 95 127 3 ~ 32 YITM11-11 114 67.4 2 29 25 3625 338 2441 165 8.41 111 149 3 ~ 32 YITM11-12 1234 75.3 2 29 25 3625 3657 2699 182 9.28 119 159 3 ~ 32 YITM11-13 131 79.4 16 232 2 29 38 2273 192 9.79 8 17 3 ~ 25 95 29 YITM 11 INSTALLATION DIMENSIONS www.yptius.com YITM 13 [5.12] 2-ø 25 [.98] Standard 69 [2.72] 26 [1.2] 8-M1 2 52 [2.5] 36 [1.42] 77 [3.3] 25 [.98] 261 [1.28] P111 5 mm parallel key 5 [1.97] YITM 11 4-ø21 [.83] Equi-spaced Mounting holes P.C. D ø 229 ±,2 [9.2 ±,79 ] 7 [2.76] 82 [3.23] 12 [.47] 14h9 [.55] 96 [3.78] ø5f7 [1.97] 5 [.2] 53.5 [2.11] ø 152.4 f8 [6.] 15 [.59] 42 [1.65] M14 112 [4.41] - 64 - ø 456 [17.95] 65 [2.56] 11 [4.33] OUTPUT OPTIONS 2-G1/2 drain port Rotation direction Flow direction Flow direction Rotation direction P112 54 mm parallel key 5-ø 17 [.67] Equi-spaced Mounting holes P.C. D ø 3 ±,3 [11.81 ±,118 ] 8 [3.15] 5 [.2] 9 [3.54] 94 [3.7] 123 [4.84] 14 h9 [.55] 54 f7 [2.13] 57 [2.24] ø 178 [7.1] ø 256 f7 [1.8]

YITM 11 P113 6 mm parallel shaft 4-ø21 [.83] Equi-spaced Mounting holes P.C. D ø 229 ±,3 [9.2 ±,118 ] OUTPUT OPTIONS S114 8-4d11x36d11x7f8 5-ø 13 [.67] Equi-spaced Mounting holes P.C. D ø 25 ±,3 [9.84 ±,118 ] 95 [3.74] 18 h9 [.71] ø6f7 [2.36] 64 [2.52] ø 152.4 f8 [6.] 8-4d11x36d11x7f8 48 [1.89] ø 15 f7 [5.91] 5 [1.97] 12 [.47] 123 [4.84] 4 [1.57] 5 [.2] 72 [2.83] S115 8-42b12x36bx7f8 5-ø 17 [.67] Equi-spaced Mounting holes P.C. D ø 3 ±,3 [11.81 ±,118 ] 7 [2.76] 74 [2.91] 13 [4.6] 8-42b12x36b12x7f8 5 [1.97] ø 256 f7 [1.8] S117 8-65d11x56d11x1f8 6 [.24] 42 [1.65] 5-ø 15 [.59] 8-65d11x56d11x1f8 61[2.4] 5-ø 15 [.59] 86 [3.39] ø 175 f7 [6.89] ø 245 ±.2 [9.65] ±.79 ø 33 ±.2 [12.99] ±.79-65 - S116 8-6b12x52b12x12f8 3 [1.18] S118 8-65d11x56d11x1f8 19 [.75] 5-ø 15 [.59] Equi-spaced Mounting holes P.C. D ø 31 ±,3 [12.2 ±,118 ] 8-65d11x56d11x1f8 61 [2.4] 6 [.24] 86 [3.39] 15 [.59] 11 [3.98] 5-ø13 [.51] Equi-spaced Mounting holes P.C. D ø 292 ±,2 [11.5 ±,79 ] 8-6b12x52b12x1f8 6 [2.36] ø 175 f7 [6.89] ø 22 f6 [8.66] www.yptius.com YITM

YITM 11 S119 8-65d11x56d11x1f8 5-ø15 [.59] Equi-spaced Mounting holes P.C. D ø 31 ±,3 [12.2 ±,118 ] OUTPUT OPTIONS FS111 6-9h11x8h11x2d9 female spline 5-ø 17 [.67] Equi-spaced Mounting holes P.C. D ø 3 ±,3 [11.81 ±,118 ] 6-9h11x8h11x2D9 8-65d11x56d11x1f8 61 [2.4] 6 [.24] ø175f7 [6.89] ø 265 f7 [1.43] 38 [1.5] 53 [2.9] ø 178 [7.1] ø 256 f7 [1.8] 86 [3.39] 92 [3.62] 9 [3.54] 37 [1.46] www.yptius.com YITM FS1111 6-9h11x8h11x2d9 female spline 47 [1.85] 1-ø11 [.43] Equi-spaced Mounting holes P.C. D ø 283 ±,2 [11.14 ±,79 ] 6-9h11x8h11x2D9 38 [1.5] 53 [2.9] 5 [.2] 43 [1.69] ø 15 f7 [4.13] ø 16 g7 [6.3] - 66 -

ASSEMBLY New assembly facility will improve quality control, cleanliness of operation increase production. This most advanced equipment will permit our company to improve assembly operation while lowering cost. - 67 - www.yptius.com

YITM 16 YITM 16 TECHNICAL SPECIFICATIONS TYPE Displacement Pressure Torque Speed Weight Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM16-14 1413 86.2 2 29 3 435 4191 393 21 1.71 175 235 2 ~ 4 YITM16-16 1648 1.5 2 29 3 435 4881 362 244 12.44 197 264 2 ~ 4 YITM16-18 1814 11.7 18 261 25 3625 487 3594 268 13.69 161 216 2 ~ 32 YITM16-2 234 124.1 16 232 25 3625 4826 3562 31 15.35 157 21 2 ~ 32 YITM16-24 2267 138.3 16 232 2 29 5374 3966 335 17.8 137 184 2 ~ 25 17 374 YITM 16 INSTALLATION DIMENSIONS www.yptius.com YITM 13 [5.12] 69 [2.72] 2-ø25 standard 26 [1.2] 8-M1 2 52 [2.5] 36 [1.42] 77 [3.3] 18 [.71] 3 [1.18] P161 6 mm parallel key 5 [1.97] 292 [11.5] YITM 16 4-ø21 [.83] Equi-spaced Mounting holes P.C. D ø 229 ±,2 [9.2 ±,79 ] 95 [3.74] 5 [.2] 123 [4.84] 6 [.24] 131 [5.16] 18h9 [,71] ø6f7 [2.36] 65 [2.56] ø 152.4 f7 [6.] 3 [1.18] M16 142 [5.59] - 68 - ø 518 [2.39] 65 [2.56] 12 [4.72] OUTPUT OPTIONS 2-G1/2 Drain Port Rotation direction Flow direction Flow direction Rotation direction P162 6 mm parallel key 5-ø21 [.83] Equi-spaced Mounting holes 1 [3.94] 11 [4.33] 129 [5.8] 17 [6.69] 18 h9 [,71] ø6 f7 [2.36] 5 [.2] 65 [2.56] ø 26 [8.11] ø 31.5 f6 [11.87]

YITM 16 P163 72 mm parallel key 5-ø21 [.83] Equi-spaced Mounting holes P.C. D ø 327 ±,2 [12.87 ±,79 ] OUTPUT OPTIONS P164 75 mm parallel shaft 5-ø22 [.87] Equi-spaced Mounting holes P.C. D ø 36 ±,2 [14.17 ±,79 ] 1 [3.94] 18h9 [,71] 11 [4.33] 2-2h9 [.79] 5 [.2] 11 [4.33] ø 72 f7 [2.83] 75.5 [2.97] ø 26 [8.11] ø 31.5 f6 [11.87] 5 [.2] ø 75 m7 [2.95] 91.2 [3.59] ø 33 h8 [12.99] 129 [5.8] 17 [6.69] 35 [1.38] 1 [.39] 148 [5.83] P165 75 mm parallel shaft 3 [1.18] 5-ø21 [.83] Equi-spaced Mounting holes P.C. D ø 327 ±,2 [12.87 ±,79 ] S167 8-65d11x56d11x1f8 5-ø15 [.59] Equi-spaced Mounting holes P.C. D ø 245 ±,2 [9.65 ±,79 ] 65 [2.56] 6 [,24] 86 [3.39] 5 [1.97] 1 [3.94] 5 [.2] 137 [5.39] 17 [6.69] 8-65d11x56d11x1f8 ø 175 f6 [6,89] 25 h9 [.98] ø 95 m7 [3.74] 1 [3.94] ø 26 [8.11] ø 31.5 f6 [11.87] - 69 - P166 8 mm parallel shaft 41 [1.61] S168 8-65d11x56d11x1f8 47 [1.85] 5-ø18 [.71] Equi-spaced Mounting holes P.C. D ø 339 ±,2 [13.35 ±,79 ] 11 [4.33] 8 [.31] 115 [4.53] 24 h9 [,94] 5-ø15 [.59] Equi-spaced Mounting holes P.C. D ø 31 ±,2 [12.2 ±,79 ] 5 [,2] 85 [3.35] 9 [3.45] ø 8 f7 [3.15] 8-65d11x56d11x1f8 65 [2.56] 88 [3.46] ø 175 f6 [6,89] ø 318 f7 [12.52] ø 265 f7 [1.43] www.yptius.com YITM

YITM 16 OUTPUT OPTIONS S169 8-72b12x62b12x12f8 5-ø21 [.83] Equi-spaced Mounting holes P.C. D ø 327 ±,2 [12.87 ±,79 ] S161 1-82b12x72b12x12f8 5-ø17 [.67] Equi-spaced Mounting holes P.C. D ø 38 ±,2 [14.96 ±,79 ] 8-72b12x62b12x12f8 1-82b12x72b12x12f8 88 [3.46] 65 [2.56] ø 26 [8.11] ø 31.5 f6 [11.87] 8 [3.15] 115 [4.53] -,5 -,15 ø 29 [11.42] -,2 -,59 17 [4.21] 148 [5.83] 35 [1.38] 1 [.39] 132 [5.2] www.yptius.com YITM FS1611 1-98h11x92h11x14d9 FS1613 12-98h11x92h11x14d9 32 [1.26] 5-ø21 [.83] Equi-spaced Mounting holes P.C. D ø 327 ±,2 [12.87 ±,79 ] 1-ø13 [.51] Equi-spaced Mounting holes P.C. D ø 32 ±,2 [12.6 ±,79 ] 6 [2.36] 8 [3.15] 8 [.31] 1-98h11x92h11x14d9 1-98h11x92h11x14d9 28 [1.1] 6 [2.36] 8 [3.15] 29 [1.14] 24.5 [.96] 6 [2.36] ø 12 g7 [4.72] ø 12 g7 [4.72] ø 17 g7 [6.69] - 7 - FS1612 1-98h11x92h11x14d9 38 [1.58] 1-ø13 [.51] Equi-spaced Mounting holes P.C. D ø 299 ±,2 [11.77 ±,79 ] 1-98h11x92h11x14d9 6 [.24] 6 [2.36] 9 [3.54] 47 [1.85] ø 12 g7 [4.72] ø 17 g7 [6.69]

ENGINEERING Our products are designed by experienced engineers, are manufactured with the most modern equipments, are tested with the most rigorous and stringent rules and guarantee a long and trouble free life. - 71 - www.yptius.com

YITM 31 YITM 31 TECHNICAL SPECIFICATIONS TYPE Displacement Pressure Torque Speed Weight Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM31-25 2553 155.7 25 3625 32 464 9523 728 38 19.38 249 334 2 ~ 25 YITM31-28 2683 163.7 25 3625 32 464 149 7416 41 2.45 27 277 1 ~ 2 YITM31-3 363 186.9 2 29 25 3625 9189 6782 459 23.41 191 256 1 ~ 2 YITM31-315 3218 196.3 2 29 25 3625 961 786 48 24.48 196 263 1 ~ 2 YITM31-35 3462 211.2 2 29 25 3625 122 7542 511 26.6 171 229 1 ~ 16 YITM31-4 4152 253.3 2 29 25 3625 12481 9211 624 31.82 25 275 1 ~ 16 YITM31-5 4828 294.6 16 232 2 29 11449 8449 715 36.46 187 251 1 ~ 16 298 656 YITM 31 INSTALLATION DIMENSIONS www.yptius.com YITM 19 [7.48] 1 [3.94] 2-ø4 [1.57] standard 36.7 [1.44] 8-M16 22 P311 85 mm parallel key 4 [1.57] 54 [2.13] 79.4 [3.13] 113 [4.45] 411 [16.18] YITM 31 5-ø2 [.79] Equi-spaced Mounting holes P.C. D ø 419 ±,2 [16.5 ±,79 ] 9 [3.54] 3 [.12] 24h9 [.94] 1 [.39] 13 [5.22] ø 85 f7 [3.35] 91 [3.58] ø 381 f7 [15.] 3 [1.18] 2 [.79] 4 [1.57] M2 183 [7.2] - 72 - ø 669 [26.34] 95 [3.74] 152 [5.98] OUTPUT OPTIONS P312 85 mm parallel key 5-ø25 [.98] Equi-spaced Mounting holes P.C. D ø 42 ±,2 [16.54 ±,79 ] 12 [4.72] 131 [5.16] 132.5 [5.2] 166.5 [6.56] 24 h9 [.94] ø 85 f7 [3.35] 2-G1/2 Drain Port 9 [3.54] ø 26 [1.24] Rotation direction Flow direction Flow direction Rotation direction ø 38 f7 [14.96]

YITM 31 P313 85 mm parallel key OUTPUT OPTIONS P314 4. parallel shaft 7-ø2 [.79] Equi-spaced Mounting holes P.C. D ø 52 ±,2 [2.47 ±,79 ] 6-ø22 [.87] Equi-spaced Mounting holes P.C. D ø 46 ±,2 [18.11 ±,79 ] 14 [5.51] 3 [.12] 149 [5.87] 1 [.39] 24h9 [.94] ø 85 f7 [3.35] 91 [3.58] +,59 +,28 ø 457 [17.99] +,15 +,7 145 [5.71] 9 [.35] 117 [4.61] 5 [.2] 25.4 h9 [1.] ø11.6 ±,5 [4.] ±,2 113.5 [4.47] ø 225f8 [8.86] 4 [1.57] 19 [7.48] 8 [3.15] P315 4. parallel shaft 5-ø25 [.98] Equi-spaced Mounting holes P.C. D ø 42 ±,2 [16.54 ±,79 ] 145 [5.71] 18 [7.9] 187 [7.36] 22 [.87] 221 [8.7] S317 1-92b12x82b12x12f8 8 [3.15] 11 [4.33] 132.5 [5.22] 166.5 [6.56] 25.4 h9 [1.] -,53 5-ø25 [.98] Equi-spaced Mounting holes P.C. D ø 42 ±,2 [16.54 ±,79 ] 1-92b12x82b12x12f8 ø 26 [1.24] -,21 ø11.5 [4] ø 38 f7 [14.96] 113.5 [4.47] ø 26 [1.24] ø 38 f7 [14.96] - 73 - S316 1-88b12x8b12x12f8 5-ø25 [.98] Equi-spaced Mounting holes P.C. D ø 42 ±,2 [16.54 ±,79 ] 13.5 [5.14] 1-88b12x8b12x12f8 72 [2.83] 95 [3.74] 96.5 [3.8] ø 318 f8 [15.] www.yptius.com YITM

YITM 31 FS318 1-98h11x92h11x14d9 female spline 5-ø25 [.98] Equi-spaced Mounting holes P.C. D ø 42 ±,2 [16.54 ±,79 ] 1-98h11x92h11x14d9 OUTPUT OPTIONS FS319 1-98h11x92h11x14d9 female spline 12-ø13 [.51] Equi-spaced Mounting holes P.C. D ø 32 ±,3 [12.6 ±,118 ] 1-98h11x92h11x14d9 5 [1.97] 8 [3.15] 38.5 [1.52] ø 12 f7 [4.72] ø 26 [1.24] ø 38 f7 [14.96] 5 [1.97] 8 [3.15] ø 12 f7 [4.72] ø 34 f8 [13.39] www.yptius.com YITM FS311 1-12h11x112h11x14d9 12h11x112h11x14d9 female spline 53 [2.9] 9.5 [3.56] 12-ø22 [.87] Equi-spaced Mounting holes P.C. D ø 36 ±,2 [14.17 ±,79 ] 1-12h11x112h11x14d9 5 [1.97] 8 [3.15] 1 [.39] 35.5 [1.4] ø 15 f7 [5.91] ø 315 f8 [12.4] ø 42 f8 [16.54] - 74-4 [1.57] 14 [.55] 5.5 [1.99]

YITM 7 YITM 7 TECHNICAL SPECIFICATIONS TYPE Displacement Pressure Torque Speed Weight Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM7-5 4946 31.8 2 29 25 3625 14626 1794 731 37.28 22 295 1 ~ 16 YITM7-54 5452 332.6 2 29 25 3625 16125 119 86 41.1 243 326 1 ~ 16 YITM7-6 5984 365.1 2 29 25 3625 17697 1361 885 45.13 28 279.5 ~ 125 YITM7-63 654 399. 18 261 22.5 3262 1748 12847 967 49.32 25 275.5 ~ 125 YITM7-7 7122 434.5 16 232 2 29 16849 14649 153 53.7 198 265.5 ~ 125 55 121 YITM 7 INSTALLATION DIMENSIONS ø 785 [3.91] 19 [7.48] 1 [3.94] 36.7 [1.44] YITM 7 P71 85 mm parallel shaft 65 [2.56] 2-ø4 [1.57] standard 8-M16 22 54 [2.13] 12 [4.72] 5 [.2] 131 [5.16] 1 [.39] 166 [6.54] 79.4 [3.13] 113 [4.45] 5-ø25 [.98] Equi-spaced Mounting holes P.C. D ø 42 ±,2 [16.54 ±,79 ] 24 h9 [.94] 438 [17.24] ø85f6 [3.35] 9 [3.54] ø 38 f7 [14.96] 3 [1.18] 2 [.79] 4 [1.57] M2 186 [7.32] - 75-95 [3.74] OUTPUT OPTIONS P72 12 mm parallel shaft 7-ø21 [.83] Equi-spaced Mounting holes P.C. D ø 52.7 ±,2 [2.5 ±,79 ] 14 [5.51] 4 [.16] 149 [5.87] 188 [7.4] 19 [7.48] 24 h9 [.94] ø85f7 [3.35] 2-G3/4 Drain Port 9 [3.54] ø 26 [1.24] Rotation direction Flow direction Flow direction Rotation direction ø 457.1 h7 [18.] www.yptius.com YITM

YITM 7 P73 85 mm parallel key 5-ø22 [.87] Equi-spaced Mounting holes P.C. D ø 58 ±,2 [22.83 ±,79 ] OUTPUT OPTIONS S74 1-12b12x112b12x16f8 7-ø21 [.83] Equi-spaced Mounting holes P.C. D ø 52.7 ±,2 [2.5 ±,79 ] 16 [6.3] 32 h9 [1.26] 1-12b12x112b12x16f8 5 [.2] 188 [7.4] ø 12 f7 [4.72] 127 [5.] 38 [14.96] 17 [6.69] 32 [1.26] ø 26 [1.24] ø 457.1 f7 [18.] 1 [.39] 24 [9.45] 27 [1.63] 58 [2.28] www.yptius.com YITM S75 1-92b12x82b12x12f8 5-ø25 [.98] Equi-spaced Mounting holes P.C. D ø 42 ±,2 [16.54 ±,79 ] 1 [.39] 166.5 [6.56] 65 [2.56] 1-92b12x82b12x12f8 8 [3.15] 132.5 [5.22] ø 38 f7 [14.96] - 76 -

YITM 1 YITM 1 TECHNICAL SPECIFICATIONS TYPE Displacement Pressure Torque Speed Weight Rated pressure Max Pressure Rated Torque Unit Torque KW HP Range ml/r in 3 /rev MPA PSI MPA PSI N.m lb/ft N.m/MPA lb ft/psi r/min kg lbs YITM1-63 6758 412.3 2 29 25 3625 1934 14273 967 49.32 226 33.5 ~ 125 YITM1-7 739 45.8 2 29 25 3625 2116 15616 158 53.96 248 332.5 ~ 125 YITM1-8 7985 487.2 2 29 25 3625 22896 16897 1145 58.39 269 36.5 ~ 125 YITM1-9 8636 526.9 2 29 25 3625 2474 18258 1237 63.9 29 389.5 ~ 125 YITM1-1 116 611.1 18 261 25 3625 25758 191 1431 72.98 245 328.5 ~ 1 83 1826 YITM 1 INSTALLATION DIMENSIONS 19 [7.48] 1 [3.94] 36.7 [1.44] 8-M16 22 79.4 [3.13] 54 [2.13] 2-ø4 [1.57] standard 113 [4.45] YITM 1 P11 12 mm parallel shaft 16 [6.3] 188 [7.4] 22 [.87] 24 [9.45] 498 [19.61] 7-ø33 [1.3] Equi-spaced Mounting holes P.C. D ø 63 ±,2 [24.8 ±,79 ] ø 12 f7 [4.72] 127 [5.] ø 36 [14.17] ø 51 f7 [19.72] 3 [1.18] 3 [1.18] 38 [1.5] M2 217 [8.54] - 77 - ø 83 [32.68] YITM 1 95 [3.74] 222 [8.74] OUTPUT OPTIONS S12 1-12b12x112b12x18f8 7-ø33 [1.3] Equi-spaced Mounting holes P.C. D ø 63 ±,2 [24.8 ±,79 ] 1-12b12x112b12x18f8 165 [6.5] 188 [7.4] 22 [.87] 24 [9.45] ø 36 [14.17] 2-G3/4 Drain Port ø 51 f7 [19.72] Rotation direction Flow direction Flow direction Rotation direction www.yptius.com YITM

DISTRIBUTOR OPTIONS YITM 1 DISTRIBUTOR TYPE STANDARD THREAD MOTOR TYPE DISTRIBUTOR DIMENSION 55.5 [2.19] 127 [5.] 32 [1.26] 56 [2.56] G 3/4 3/4 BSPP Thread YITM1 D31 G 1 M 1 1 BSPP Thread 27x2 Metric YITM2 YITM3 13 [4.6] 56 [2.2] M 2 33x2 Metric YITM6 2-G3/4 47 [1.85] ø124 4.88 www.yptius.com YITM D4 D47 D9 G 1 M 1 M 2 C61 M 1 M 2 C61 M 1 M 2 1 BSPP Thread 27x2 Metric 33x2 Metric A-B ports 25 mm 4 Bolts flange code 61 27x2 Metric 33x2 Metric A-B ports 4 mm 4 Bolts flange code 62 33x2 Metric 42x2 Metric YITM8 YITM11 YITM11 YITM16 YITM16 YITM31 YITM7 YITM1-78 - 128 [5.4] 13 [5.12] 19 [7.48] 26 [1.2] 69 [2.72] 2-G1/2 26 [1.2] 8-M1 2 36.7 [1.44] 36.7 [1.44] 8-M16 22 41 [1.61] 72 [2.83] 62 [2.44] 77 [3.3] 52 [2.5] 113 [4.45] 79.4 [3.13] 41 [1.61] 2-ø25 [.98] 69 [2.72] 2-ø4 [1.57] ø129 [5.8] ø129 [5.8] 133 [5.24] 131 [5.16] 65 [2.56] 19 [7.48] 68 [2.68] 59 [2.32] 95 [3.74] 1 [3.94] ø19 [7.48]

YITM PORT ORIENTATION Drain Port Drain Port Drain Port Input Input Input Output Output Output Mounting Holes Mounting Holes Mounting Holes A-B 1 A-B 2 A-B 3 Drain Port Drain Port Drain Port Input Input Input Output Output Output Mounting Holes Mounting Holes Mounting Holes A-B 4 A-B 5 A-B 6-79 - www.yptius.com YITM

ORDERING CODE YITM YITM H ** *** *** ** * * INPUT/OUTPUT PORT DIRECTION please see the illustration if there is no special indication. It means the motor mounting hole according to 72 on equispaced on PCD, oil input and output port direction follow 9. 18 position change. The specific request can be confirmed by the port direction, please see Page 78 and state it in your orders I/O PORT THREAD standard thread may not state. If you have special request, please see Page 22 and state it in your orders www.yptius.com YITM - 8 - DISTRIBUTORS (please see the graph of dimension of alla series of motors). If you have special request please see page 78 and state it ion your orders OUTPUT SHAFT 1. No symbol--- standard rectangle spline shaft (the center is up to outside diameter) 2. B--Key shaft; footnote number means the installation dimension same as BM series motor or ither motor or other bands (with flange) 3. D--installation dimension same as 1 JMD series motor (KunSan HYD element plant) 4. I--inside spline (the center is up inner diameter); footnote number means the intallation dimension same as QJM series motor (with flange which produced by Ningbo hydraulic motor factory) 5. GM, SL--the installation dimension same as M series, L series of SAI ITALY, footnote number means means different kinds of installation dimension DISPLACEMENT (ml/r) SERIES MOTOR TYPE 1. no letter stands for standard hydraulic motor 2. H for high performance hydraulic motor YITM/YITM model of STF hydraulic motor

HYDRAULIC MOTOR DATA SHEET Date: Company Contact Phone Machine Model Existing Motor Mfg Code Model # Quantity YSTFC Type YSTFD Radial piston YITM Displacement Cu in/rev Max oil flow GPM Max working pressure PSI Nominal oil flow GPM Porting Nominal working pressure PSI Shaft Speed RPM cont Mnt Flange RPM int RPM peak Is a drain line available? Yes No Type of flow circulation Closed Loop Open Loop Free-wheeling required Yes No Max torque lb/in Max fluid temp F Additional application info. Duty Cycle % of Time Torque lb/in % of Time Speed Rpm % of Time 1 2 3 4 For Internal use: Date: Selection Reviewed by Approved by

36 Plaza Dr. Unit 17 Garnet Valley, PA 1961 Tel: (61)558-76 Fax: (61)558-762 www.youngpowertechinc.com LIMITED ONE YEAR WARRANTY FOR HYDRAULIC MOTORS If the hydraulic motor (product) fails to function within one (1) year after the date of its original shipment, or invoice date whichever come first, due to a defect in the materials or workmanship, Young Powertech Inc. (YPT) will remedy the defect without charge to the consumer purchaser. The foregoing limited warranty does not cover failure to function caused by damage to the product while in your possession, improper installation, unreasonable use or abuse of the product, failure to provide or use of improper maintenance, failure to follow written installation and instructions, or any use other than for personal, family or household purposes. THE REMEDIES PROVIDED IN THE ABOVE EXPRESS LIMITED WARRANTY ARE THE SOLE AND EXCLUSIVE REMEDIES AVAILABLE TO YOU. NO OTHER EXPRESS WARRANTIES ARE MADE. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR- POSE OR USE, ARE LIMITED IN DURATION AS SET FORTH ABOVE. IN NO EVENT SHALL YPT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. The consumer-purchaser must maintain proof of purchase and shipment date of the product to prove the date of purchase and shipment in the unlikely event of a warranty claim. In order to obtain a return authorization number you must contact Young Powertech Inc. at 61-558-76 prior to shipping. The customer will be required to ship only the defective parts, freight pre-paid to : Young Powertech Inc 36 Plaza Dr. Unit 17 Garnet Valley, PA 1961 Young Powertech Inc, will repair or replace any part found defective and return the unit prepaid by ground shipment to the customer. In the event that the unit is not found to have a defect the customer will be charged an inspection fee and the unit will be returned freight collect to the customer.