PUMPS Powered by tecpool
Variable Speed Pump TPOOL INTRNIONL SPÑ has developed innovative range of pool pumps combining the new inverter [e] pool drive and the new high efficiency synchronous motors with permanent magnets. The combination of these two technologies designed and developed entirely by TPOOL INTRNIONL SPÑ, assure energy savings of over 80% compared to the traditional pumps. Total adaptability, speed range from 600 rpm to 3,000 rpm. The pump automatically sets to the point of maximum savings.
tecpool eorizon Variable Speed Pump NI N I L tecpool Variable Speed Pump, the new range of pool pumps with the new inverter [e] pool drive and the new high efficiency synchronous motors with permanent magnets. The combination of these two innovative technologies, assure energy savings of over 80% compared to the traditional pumps. ontrol Panel tecpool [e] orizon pool drive Specifications Incorporates a specially developed software for automation of the [e] orizon pump with an easy and intuitive programming on the control panel. Very significant energy savings that can reach more than 80% of the energy cost. xtremely silent ( 40 d). Total adaptability, speed range from 600 rpm to 3,000 rpm. The pump automatically sets to the point of maximum savings. Great versatility, one single model to any size of pool from 15m 3 to 150 m 3. Not necessary to have different pumps, our [e] orizon is able to control filtration, fountains, backwashing and vacuuming in any situation. New IPM sensor less brushless motor with permanent magnets, which reduces the engine temperature and extends the life of bearings and mechanical parts. igh Protection, the parameters set during programming protect your pump, installation and sand filter. Integrated connectivity to manage salt chlorinator, heat pump, lights, etc. L display where all necessary information is clearly reflected. esides all these advantages, the new [e] pool drive is protected and protects your installation against: Over pressure protection Over current protection Input voltage fluctuations protection ry running protection roken pipe protection It also includes automatic settings such as: ilter protection against overflow utomatic reset of protections ailures and incidents history Partial and total counters of the most important parameters The new range of [e] orizon pool pumps are prepared to interact with the new communications technologies by using a Wii module (on request), and monitores all the parameters of the pool through applications for IOS, ndroid and Windows Phone. It also allows interaction with a wide range of accessories such as panels with transformers for lights, alarms, external sensors, remote controls, etc. nergy Savings comparison table Savings ode P RPM Motor type Pool m 3 Work m 3 /h h/day kw kw/h Saving kw/h/year Kg/O 2 /Year Tree saved nergy saving Pool of 80 m2 nergy saving Pool of 50 m2 1,5 P PUMP 1,5 2.850 asincrono 80 4,00 1, 1, 1.606 640 [e] T 300 3 800 brushless ipm 80 9 8,89 0,06 0,06 88% 195 90 550 1 P PUMP 1 2.850 asincrono 50 15 3,33 0,65 2,17 791 297 [e] T 300 3 600 brushless ipm 50 6 8,33 0,04 0,33 85% 122 56 241 Please refer to next page (tecpool orizon Pump) to find the dimensions table atecpool.com 13
tecpool orizon Plus Selfpriming pump NI N I L tecpool orizon Plus self priming pump for pools with large prefilter, which, together with its excellent hydraulic performance, gives a very large filtering capacity. filter with a transparent, polycarbonate lid that easily allows inspection of the interior of the prefilter sieve. No possible electrical contact with the water as no part of the motor is open to it. Includes fittings kit for gluing. tecpool orizon Plus Specifications Pump body, pump body lid and diffuser in polypropylene, resistant to the chemical products in pools and reinforced with glass fibre, guaranteeing excellent duration. Shaft in stainless steel ISI316. nclosed motor, totally silent, with IP55 protection, 3.000 rpm 230V 50z singlephase or 230 / 400V 50z threephase Noryl impeller. Mechanical seal in stainless steel ISI316. note: 50 = orizon 0.5 P 75 = orizon 0.75 P 0 = orizon 1.0 P 150 = orizon 1.5 P 0 = orizon 2.0 P 300 = orizon 3.0 P tecpool orizon Plus allows two possible connections: Male thread of 2 onnection for PV pipe Ø 63 to glue. tecpool orizon Plus is equipped with standard asynchronous motor, sealed from external ventilation. lass insulation. ode P KW ond. µ Manometric height w.c.m. N NI II 230 III 230 III 400 4 6 8 12 14 16 21 low m 3 /h 4800M 16 3,6 0,5 0,37 4800T 2,4 1,4 17,5 15,6 13,5 11,1 8,4 4802M 4,75 0,75 0,55 4802T 3,1 1,8 19,5 15,7 13,5,8 7,9 4808M 25 5,5 1 0,75 4808T 3,8 2,2 23,2 21,1 19,7 15 12,3 8,7 2 & 2 & Ø63 Ø63 4812M 30 7,3 1,5 1 27 25 23 21 19 17 14 PV PV 4812T 5,0 2,9 4816M 40 9,2 2 1,5 4816T 6,0 3,5 28 26 24 21 14 12 48M 40 12,2 3 2,2 48T 8,6 5,0 32 30 29 27 23 15 12 ode I L L 1 1 1 NI Weight Packaging dimension Kg 4800M 4800T 216 265 370 6 2 550 630 230 360 2,9 4802M 4802T 216 265 370 6 2 550 630 230 360 2 11,4 4808M 4808T 216 265 370 6 2 550 630 230 360 2 12,4 4812M 4812T 216 265 370 6 2 580 630 230 360 2 13,9 4816M 650 705 216 265 370 6 2 4816T 575 630 230 360 2 15,4 48M 48T 216 265 370 6 2 650 705 230 360 2 17,4 14 atecpool.com
tecpool merica Selfpriming pump G I tecpool merica Selfpriming electric pump for swimming pools, with builtin prefilter Prefilter with transparent lid in polycarbonate which allows easy observation of the prefilter basket. The prefilter is closed by means of a thread. Pump body made in polypropylene reinforced with fibreglass, resistant to the chemical products in the swimming pool. Pump body lid and diffuser in Noryl. Noryl impeller with shaft in stainless steel ISI 316L. Mechanical seal in graphite and ceramics. nclosed motor, totally silent, with IP55 protection, 2.850 rpm 230V 50z singlephase or 230 / 400V 50z threephase. Possibility of 60z upon request. onnections of suction and return at 2 ¼ for Ø50 mm bush connections. Suction and return unions 50 included Manometric delivery head is expressed in metres of water column (mwc): 1 bar =.19 mwc. ode Power Manometric eight w.c.m. 2 4 6 8 12 14 16 P KW low m 3 /h M033M 0,3 0,25 13 12 7 4 M050M 0,5 0,37 15 13 11 9 5 M075M M075T M0M 0,75 0,55 15 13 11 8 4 M0T M125M 1 0,75 19 16 14 11 6 M125T 1,5 1, 19 17 14 9 ode Power imensions Weight Volume m 3 P KW G I Kg M033M 0,3 0,25 475 296 280 Ø 50 225 0 199 168 9,7 0,059 M050M 0,5 0,37 475 296 280 Ø 50 225 0 199 168 0,059 M075M M075T M0M M0T M125M M125T 0,75 0,55 490 311 280 Ø 50 225 0 199 168 12 0,059 1 0,75 490 311 280 Ø 50 225 0 199 168 12,5 0,059 1,5 1, 490 311 280 Ø 50 225 0 199 168 13,5 0,059 atecpool.com 15
tecpool Niagara Selfpriming pump L tecpool Niagara Selfpriming electric pump for swimming pools, with builtin prefilter. Prefilter with transparent lid in polycarbonate which allows easy observation of the prefilter basket. The prefilter is closed by means of a thread. Pump body made in polypropylene reinforced with fibreglass, resistant to the chemical products in the swimming pool. Pump body lid and diffuser in Noryl. Noryl impeller with shaft in stainless steel ISI 316L. Mechanical seal in graphite and ceramics. Motor shaft manufactured in stainless steel ISI 316L. nclosed motor, totally silent, with IP55 protection, at 3.000 rpm 230V 50z singlephase or 230 / 400V 50z threephase. Possibility of 60z upon request. onnections of suction and return at 2 ¾ for Ø 63 mm bush connections. ode Power Manometric eight w.c.m. 2 4 6 8 12 14 16 22 P KW low m 3 /h N050M N050T N075M 0,5 0,37 15 14 11 9 6 N075T N0M 0,75 0,55 19 17 14 12 9 5 N0T N150M 1 0,75 21 16 12 9 N150T N0M 1,5 1, 25 23 21 19 16 14 7 N0T N300M 2 1,50 27 25 23 21 14 6 N300T 3 2, 28 27 25 23 17 12 3 ode Power imensions Weight Volume m 3 P KW L Kg N050M N050T 0,5 0,37 312 Ø63 5 282 140 348 565 12,5 0,060 N075M N075T 0,75 0,55 312 Ø63 5 282 140 348 565 13 0,060 N0M N0T 1 0,75 312 Ø63 5 282 140 348 565 14 0,060 N150M N150T 1,5 1, 312 Ø63 5 282 140 348 590 17 0,060 N0M N0T 2 1,50 312 Ø63 5 282 140 348 605 19,5 0,060 N300M N300T 3 2, 312 Ø63 5 282 140 348 625 22,5 0,060 16 atecpool.com
tecpool ig iscovery Selfpriming pump L G Ø Ø tecpool ig iscovery Selfpriming centrifugal electric pump for swimming pools, Selfpriming at 2 m. uiltin prefilter of great capacity (8 litres) Noryl impeller. ronze impeller on request. Prefilter with transparent lid in polycarbonate which allows easy observation of the prefilter basket. The prefilter is closed with a knob system of easy accessibility. Pump body made in polypropylene reinforced with fiberglass, resistant to the chemical products in the swimming pool. Mechanical seal in graphite and ceramics. Motor shaft manufactured in stainless steel ISI 316L. Motor with IP55 protection, at 3.000 r.p.m., 230 / 400V 50z threephase (Upon request 400 / 690V 50z versions available). Possibility of 60z upon request. Suction connection Ø90 mm, return connection Ø75 mm. oth supplied with bush connections. (m. O) 22 16 14 12 8 6 4 2 30 40 50 60 70 80 90 0 Q (m 3 /h) ode Power Manometric eight w.c.m. 2 4 6 8 12 14 16 P kw low m 3 /h 350T 3 2,2 62 57 51 46 40 30 13 400T 4 2,9 82 77 70 63 55 44 31 15 550T 5,5 4 91 85 80 72 65 56 45 30 3 ode Power imensions Weight Volume m 3 P kw G L Kg 350T 3 2,2 300 160 Ø90 Ø75 368 3 264 431 713 24 0,12 400T 4 2,9 300 160 Ø90 Ø75 368 3 264 431 743 27 0,12 550T 5,5 4 300 160 Ø90 Ø75 368 3 264 431 743 29 0,12 atecpool.com 17
tecpool eres entrifugal Pump L G tecpool eres igh low Plastic pumps. entrifugal electric pumps for swimming pools, with builtin prefilter, ideal for high flow at low pressure. guaranteed to last a long time. Prefilter with transparent lid in polycarbonate which allows easy observation of the prefilter basket. The prefilter is closed with a knob system of easy accessibility. Pump body and prefilter made in polypropylene reinforced with fibreglass, resistant to the chemical products in the swimming pool, guaranteed to last a long time. ronze impeller. Motor shaft manufactured in stainless steel ISI 316L. Prefilter basket in stainless steel too. Motors with IP55 protection, at 3.000 r.p.m., 230/400V50z or 400/690V 50z (7,5, and 12,5 P) threephase. Versions from 4P to 12,5P. Possibility of ISI 316L stainless steel impellers upon request. (m. 2 O) 25 15 5 0 S1 S400 S550 S750 S00 0 50 0 150 Q (m 3 /h) ronze impeller ode Power Manometric eight w.c.m. 5 8 12 14 16 P KW low m 3 /h S400 4 2,9 91 70 60 40 30 S550 5,5 4 1 80 70 50 40 S750 7,5 5,5 132 1 0 90 80 60 S00 7,4 150 130 1 1 0 80 50 40 S1 12,5 9,2 162 140 140 125 1 95 60 50 ode Power imensions Weight Volume m 3 P kw G L Kg S400 4 2,9 375 255 Ø90 405 470 330 0 535 8 46 0,252 S550 5,5 4 375 255 Ø1 405 470 330 0 535 840 51 0,252 S750 7,5 5,5 375 255 Ø1 405 470 330 0 535 840 57 0,252 S00 7,4 375 255 Ø1 405 470 330 0 535 9 68 0,252 S1 12,5 9,2 375 255 Ø1 405 470 330 0 535 955 72 0,252 atecpool.com
tecpool Thamesis entrifugal pump NI ØI G N Ø N N P M N L w/o prefilter UL SRI NUI SIN PRILTRO_LOW SRIS NUI WITOUT PRILTR tecpool Thamesis Specifications igh efficiency centrifugal pumps, ideal for high flow rates. ydraulic efficiency without prefilter of up to 85% depending on model. UL SRI NUI ON PRILTRO_LOW WIT PRILTR 24 24 22 22 16 16 14 14 12 12 1500 00 Independent 25litre 6 x 6 prefilter with transparent lid. 8 8 Low noise level (under 66 d depending on model). 6 6 4 4 Pump body made of stateoftheart thermoplastic resistant to swimming pool chemicals, guaranteeing a long highperformance life. 2 Standard 6 x 5 pump connections. 80 0 1 140 160 0 0 2 240 260 280 40 60 22 Motors with IP55 protection enclosure16 operating at 1,500 rpm (III Phase). 16 vailable versions: 7.5P / P / 15P.12 12 14 00 14 1500 0750 8 6 00 1500 6 ISI316 (4) grade stainless steel nuts4 and bolts. 4 2 2 0 0 40 60 80 0 1 140 160 0 0 2 240 260 280 Power P 60 WIT PRILTR ode 40 24 Standard drive shaft compatible with all motor manufacturers. Model 0 ighperformance mechanical seal suitable for sea water. 22 8 Motors classified as premium or high efficiency (I3 or I2). 075 2 0 24 0750 Performance graph w/ prefilter UL SRI NUI ON PRILTRO_LOW SRIS NUI UL SRI NUI SIN PRILTRO_LOW SRIS NUI Plastic turbine, with no metal parts coming in contact with water. WITOUT PRILTR 0750 40 60 80 0 1 140 160 0 0 2 240 260 280 Manometric eight w.c.m. KW 12 14 16 onnections 22 24 N NI low m /h 3 tecpool Thamesis w/o prefilter tecpool Thamesis w/ prefilter Model tecpool Thamesis w/o prefilter tecpool Thamesis w/ prefilter 0750 7,5 5,5 136 1 94 60 00 7,4 179 161 139 80 1500 15 11,2 252 238 8 178 132 32 0750 7,5 5,5 148 132 112 90 55 00 7,4 2 170 152 130 76 1500 15 11,2 252 232 2 6 160 1 32 ode Power imensions P KW N Ø NI ØI G L M N P 0750 7,5 5,5 446 150 125 653 550 192 667 1215 540 480 157 00 7,4 446 150 125 653 550 192 667 1 540 480 157 1500 15 11,2 446 150 125 653 550 192 667 1350 670 480 157 0750 7,5 5,5 326 150 125 254 550 192 653 815 140 480 00 7,4 326 150 125 254 550 192 653 850 140 480 1500 15 11,2 326 150 125 254 550 192 653 950 270 480 atecpool.com 19 80 0 1 140
tecpool Vert Maxim Selfpriming pump m.c.a. NI N ØT 1 1500 300 400 550 750 00 0 25 50 75 0 125 150 175 0 Q m 3 /h 3 to P note: 300 = V4300 400 = V4400 550 = V4550 750 = V4750 00 = V400 1 = V21 1500 = V21500 tecpool Vert Maxim Superquiet pump (4 poles motor). ighvolume selfpriming pump available in 2 and 4 poles versions ideal for larger filtration systems. eatures large suctionside prefilter which together with excellent hydraulic performance ensures extremely high filtration capacity. ounterflanges not supplied as standard (available on request). Turbine available in 2 versions. tecpool Vert Maxim Specifications Prefilter body, pump body, volute, countervolute and cover in glassfibre loaded polypropylene resistant to pool chemicals. Prefilter basket in polythene. Polycarbonate prefilter cover with fourpin closure system. Noryl impeller. ronze impeller on request. Mechanical seal in ceramic carbon and ISI316 stainless steel (ready to work with sea water). Shaft in ISI316 stainless steel. nclosed asynchronous motor with external ventilation. Protection grade IP55. lass insulation. ouble frequency (50z and 60z) available. 4 poles motor for power ratings between 3 and hp. 2 poles motor for 12.5 and 15 hp. With all models, impeller available in Noryl or bronze. ode Power RPM Manometric eight w.c.m. onnections P KW 6 8 12 14 16 22 N NI low m 3 /h V4300 3 2,2 1450 63 55 45 30 17 1 1 V4400 4 3 1450 73 66 58 46 35 23 1 1 V4550 5,5 4 1450 112 94 77 54 31 1 1 V4750 7,5 5,5 1450 137 121 5 83 60 28 1 1 V400 7,5 1450 158 142 126 7 84 60 27 1 1 V21 12,5 9,2 3000 160 150 1 0 75 40 1 1 V21500 15 11 3000 190 0 158 140 119 94 71 25 1 1 ode Power imensions Packing imensions P KW N NI ØT 1 1 L 1 Weight kg V4300 3 2,2 903 503 338 169 4 325 N 125 N 0 16 700 923 750 85,5 V4400 4 3 903 503 338 169 4 325 N 125 N 0 16 700 923 750 87,5 V4550 5,5 4 923 503 338 169 4 325 N 125 N 0 16 700 923 750 96,5 V4750 7,5 5,5 923 503 338 169 4 325 N 125 N 0 16 700 923 750 9 V400 7,5 923 503 338 169 4 325 N 125 N 0 16 700 923 750 119 V21 12,5 9,2 923 503 338 169 4 325 N 125 N 0 16 700 923 750 127,5 V21500 15 11 923 503 338 169 4 325 N 125 N 0 16 700 923 750 128,5 atecpool.com
tecpool oral 3000 entrifugal pump I I PI ØNI P ØN ØT G J tecpool oral 3000 is a large volume centrifugal pump, to which a prefilter has been attached to the inlet, making these the ideal pumps for large filtering units. The bronze version is ideal for sea water application. IP54, 3000 rpm, 5060 z 28 26 24 tecpool oral 3000 Specifications 22 ast iron version: Pump body, prefilter, coupling and impeller in cast iron. Shaft and prefilter sieve in ISI 316 stainless steel. Mechanical seal in carbonceramic. On request, the impeller may be in bronze and the mechanical seal in silicon carbide or tungsten carbon. ast bronze version: Pump body, prefilter, support and impeller IN 1705 RG 5 bronze (GuSn 5 ZnPb). Shaft, prefilter sieve and bolts in ISI 316 stainless steel. On request these pumps can be supplied in any other bronze alloy. 16 14 12 8 6 4 2 300 400 550 1500 1 00 750 0 25 50 75 0 125 150 175 0 225 551 Q m 3 /h note: 300 = 2300 400 = 2400 550 = 2550 551 = 2551 750 = 2750 00 = 200 1 = 21 21500 = 21500 ode Manometric height w.c.m. N NI ast Iron ronze P KW 230V 400V 6 8 12 14 16 22 low m 3 /h 2300 R2300 3 2,2 9 5,2 61 54 51 46 35 29 N80 N80 2400 R2400 4 3 12 6,9 70 64 59 55 49 42 30 N80 N80 2550 R2550 5,5 4 16,5 9,5 95 90 84 77 65 54 32 N125 N0 2551 R2551 5,5 4 16,5 9,5 128 121 7 90 69 30 N125 N0 2750 R2750 7,5 5,5 21,7 12,5 159 152 135 125 9 88 60 N125 N0 200 R200 7,5 15,5 175 166 158 147 135 119 98 68 N125 N0 21 R21 12,5 9,2 19 195 8 175 163 150 136 5 86 N125 N0 21500 R21500 15 11 23 0 197 193 3 170 155 132 1 87 N125 N0 ast Iron ronze imensions Intake Output Packaging Weight G I J ØN P NºT ØT ØNI I PI NºT ØT L 1 1 1 I r 2300 R2300 465 880 425 80 605 4 275 0 3 80 0 160 4 80 0 160 4 1.050 400 660 75 90 2400 R2400 465 9 425 80 605 4 275 0 3 80 0 160 4 80 0 160 4 1.050 400 660 79 96 2550 R2550 500 985 455 5 635 435 280 215 330 280 125 2 8 0 2 0 8 1.150 400 660 4 124 2551 R2551 500 985 455 5 635 435 280 215 330 280 125 2 8 0 2 0 8 1.150 400 660 4 124 2750 R2750 500 50 455 5 675 435 280 215 330 280 125 2 8 0 2 0 8 1.150 400 660 121 140 200 R200 525 95 470 1 725 465 325 275 345 330 125 2 8 0 2 0 8 1.150 400 660 140 163 21 R21 525 1130 470 1 725 465 325 275 345 330 125 2 8 0 2 0 8 1.150 400 660 148 163 21500 R21500 525 1130 470 1 725 465 325 275 345 330 125 2 8 0 2 0 8 1.150 400 660 148 168 atecpool.com 21
tecpool Wave 3000 entrifugal pump I I PI ØNI P ØN ØT G J tecpool Wave 3000 is a large volume centrifugal pump, to which a prefilter has been attached to the inlet, making these the ideal pumps for large filtering units. m.c.a. (37,5 P) ft. tecpool Wave 3000 Specifications 36 34 1,08 111,52 ast iron version: Pump body, prefilter, coupling in cast iron. Shaft and prefilter sieve in ISI 316 stainless steel. ronze impeller Mechanical seal in silicon carbide or tungsten carbon. Protection IP55. 2 poles 5060 z. Totally standard motor, allows the motor to be changed or repaired without emptying the installation. Standard asynchronous motor, sealed from external ventilation. Its standard construction allows it to be replaced with another standard motor at any time and in any place. Motor: 3000 rpm 32 30 28 26 24 22 558 308 408 0 30 40 50 44 88 132 176 2 4,96 98,40 91,84 85,28 78,72 758 72,16 65,60 59,04 Q m 3 /h Q US gpm WV 3000 (3 / 7,5P) ode Manometric height w.c.m. P KW 230V 400V 22 24 25 27 30 32 35 low m 3 /h 2308 3 2,2 8,5 5,2 16 14 12 2408 4 3 11,8 7,1 29 26 24 22 6 2558 5,5 4 16,2 9,4 36 34 33 30 25 21 12 2758 7,5 5,5 14,2 54 52 48 41 32 208 7,5 16,5 2 92 83 64 62 42 2 7,5 16,5 88 84 74 56 36 21508 15 11 24,2 117 113 2 78 54 208 15 32 165 140 125 1 114 85 28 25,5 41,5 240 225 0 190 175 145 125 72 note: 308 = 2308 408 = 2408 558 = 2558 m.c.a. (25 P) ft. 36 34 32 30 28 26 24 1,08 111,52 4,96 98,40 91,84 85,28 78,72 1.8 22 1.508 72,16 65,60 2.508 16 2.008 59,04 52,48 1.008 14 45,92 0 50 0 150 0 Q m 3 /h 2 440 660 880 1.0 Q US gpm WV 3000 ( / 25P) 758 = 2758 08 = 208 = 2 1508 = 1508 08 = 208 8 = 28 ast Iron imensions Intake Output Packing imensions Weight Kg G I J ØN P NºT ØT ØNI I PI NºT ØT 1 1 L 1 i 2308 465 979 430 70 639 360 224 212 265 302 65 5 145 4 50 165 125 4 660 400 1.050 94 2408 442 998 398 95 616 450 3 3 333 80 0 160 8 65 5 145 8 660 400 1.050 5 2558 442 21 398 95 616 450 3 3 333 80 0 160 8 65 5 145 8 660 400 1.150 1 2758 490 1138 443 95 733 430 246 280 345 365 0 2 0 8 80 0 160 8 660 400 1.150 140 208 490 1248 443 95 733 430 246 280 345 365 0 2 0 8 80 0 160 8 660 400 1.260 155 2 500 1258 440 1 743 480 3 280 360 392 125 2 8 0 2 0 8 660 400 1.260 176 21508 515 1413 455 1 788 505 335 315 400 424 125 2 8 0 2 0 8 660 400 1.415 272 208 585 1528 525 1 858 611 440 315 400 472 150 290 240 8 125 2 8 7 800 1.530 355 28 585 1558 525 1 858 611 440 315 400 472 150 290 240 8 125 2 8 7 800 1.530 385 22 atecpool.com
tecpool oral 1500 entrifugal pump I I PI ØNI P ØN ØT G J tecpool oral 1500 ast Iron 1450 R.P.M. centrifugal pump, to which a prefilter has been attached to the inlet, making these the ideal pumps for large filtering units. The fact that the pump works with a 4 poles motor makes it very quiet and long lasting. m.c.a 30 27 24 tecpool oral 1500 Specifications Pump body, support, prefilter in cast iron. Shaftcoupling and prefilter sieve in ISI 316 stainless steel. Mechanical seal in carbon silicon carbide. ronze impeller Standard asynchronous motor, sealed from external ventilation. Its standard construction allows it to be replaced with another standard motor at any time and in any place. Protection IP55. 4 poles 5060 z. Motor: 1450 rpm 21 15 12 9 6 3 308 408 558 758 08 1508 0 15 30 45 60 75 90 5 1 ORL 1500 note: 308 = 4300 408 = 4400 558 = 4550 758 = 4750 08 = 400 1508 = 41500 08 = 400 8 = 40 3008 = 43000 Q m 3 /h ode Manometric height w.c.m. P KW 230V 400V 22 24 25 27 30 32 35 m.c.a 40 36 low m 3 /h 32 28 4300 3 2,2 9,4 5,5 23 13 4400 4 3 12,5 6,9 27 19 4550 5,5 4 17 9,2 51 43 33 24 16 12 8 3008 08 4750 7,5 5,5 23 12 75 64 50 12 400 7,5 15,5 85 75 63 54 41500 15 11 21,8 1 90 72 400 15 32 190 160 1 2 40 25,5 41,5 170 160 140 1 30 43000 30 22,5 52 2 0 190 160 135 2 8 4 0 25 50 75 0 125 150 175 0 ORL 1500 Q m 3 /h ast Iron imensions Intake Output Packing imensions Weight Kg G I J ØN P NºT ØT ØNI I PI NºT ØT 1 1 L 1 i 4300 465 979 430 70 639 360 224 212 265 302 65 5 145 4 50 165 125 4 660 400 1.050 94 4400 442 998 398 95 616 450 3 3 333 80 0 160 4 65 5 145 4 660 400 1.050 5 4550 442 21 398 95 616 450 3 3 333 80 0 160 4 65 5 145 4 660 400 1.150 1 4750 490 1138 443 95 733 430 246 280 345 365 0 2 0 8 80 0 160 8 660 400 1.150 140 400 490 1248 443 95 733 430 246 280 345 365 0 2 0 8 80 0 160 8 660 400 1.150 155 41500 500 1258 440 1 743 480 3 280 360 392 125 2 8 0 2 0 8 660 400 1.150 176 400 515 1413 455 1 788 505 335 315 400 424 125 2 8 0 2 0 8 660 400 1.150 272 40 585 1528 525 1 858 611 440 315 400 472 150 290 240 8 125 2 8 7 400 1.150 355 43000 585 1558 525 1 858 611 440 315 400 472 150 290 240 8 125 2 8 7 400 1.150 385 atecpool.com 23
tecpool ounter urrent SuperQuiet pump L G I tecpool ounter urrent ighflow centrifugal pump. Pump body made in polypropylene reinforced with fibreglass, resistant to chemical products in the swimming pool, guaranteed to last a long time. Impeller in Noryl. Mechanical seal in graphite and ceramics. Motor shaft manufactured in stainless steel ISI 316L. 3P singlephase motors at 230V50z, or threephase 3P, 4P or 5,5P at 230/400V50z motors, all at 3.000 r.p.m. and IP55 protection. Possibility of 60z upon request. onnections of suction and return at 3 ½ for Ø 75 mm bush connections. ush connections included with the pump note: 3 = KT4300 4 = KT4400 5 = KT4550 ode Power RPM Manometric height w.c.m. onnection P KW 6 8 12 14 16 N NI low m 3 /h KT4300 3 2,2 3.000 55 44 31 12 75 75 KT4400 4 2,9 3.000 73 66 58 49 36 21 75 75 KT4550 5,5 4 3.000 86 79 70 60 49 34 16 75 75 ode imensions Packing imensions G I L Weight kg KT4300 370 156 Ø75 260 Ø75 77 95 319 168 4,5 KT4400 4 156 Ø75 260 Ø75 77 95 319 168 450 23,5 KT4550 4 156 Ø75 260 Ø75 77 92 319 168 450 25,5 ounter urrent ontrol Panel Leak proof housing IP67, 160x160x140 mm. With pneumatic switch for remote control. Pumps protection by motor circuit breaker. ode imensions P Weight Volume mm Kg m 3 T173 160x160x140 6,0,0 4,0 / 5,5 P TRI 1,1 0,004 24 atecpool.com
tecpool ounter urrent Nozzle ounter current equipment tecpool Jet Stream Nozzle in stainless steel ISI 316 170 Ø 4 313 tecpool Jet stream Nozzle in Stainless steel construction, highly competitive in hydraulic performance. The Jet swim pump is activated via the piezoelectric switch. Wall mounted assembly with handle semicircular, the regulator forces the impact of the water jet into nozzle of 40mm. Installation of TPOOL Jet Stream Nozzle is hassle free with inlet outlet connections on the rear end. The center of the Jet stream housing must be 175 mm below the water surface. The stainless steel front plate is installed after the casting. vailable in three versions. Single Jet Stream 40mm, ouble Jet Stream 40mmx2 and ouble Jet Stream Nozzle 40mmx2 RG back light for relaxing chromotherapy. Note: odes below includes only the nozzle. ode escription imensions Pipe connection Materials iameter T017S Single Jet stream nozzle 40mm Ø 2,5 Stainless Steel ISI 316 T019S ouble Jet stream nozzle 40mmx2 Ø 313 2,5 Stainless Steel ISI 316 T0S ouble Jet stream nozzle 40mmx2 RG Ø 313 2,5 Stainless Steel ISI 316 tecpool ounter urrent Nozzle S Nozzle made entirely of white S, totally resistant to UV rays and the harsh chemicals generally used in swimming pools. uiltin pneumatic pushbutton to operate relay of the pump s control box, (T034, T035, T036). irectional jet, venturi outlet, connections. G = 15 o Vent for the counter current nozzle ontrol panel Pneumatic electropushbutton Impulsion Refoulement ounter current nozzle Suction ounter current pump ode Pool imensions Weight Volume G Kg m3 T034 oncrete 390 3 Ø,5 Ø 90 Ø 75 41 2,5 0,047 T035 Prefabricated 390 3 Ø,5 Ø 90 Ø 75 41 2,5 0,047 T036 Liner 390 3 Ø,5 Ø 90 Ø 75 41 2,5 0,047 Safety: The Jet is so strong, not to go closer than 0,4 m from the outlet. Small children to be accompanied by adults while ounter urrent Jet in operation. atecpool.com 25
tecpool ir lowers eavy uty ode imensions (mm) 140850 261 266 225 2131 287 302 280 2161 335 335 3 2151 350 365 375 315301 375 383 405 4321 375 383 405 505380 442 462 4 tecpool ir lowers Pumps designed for bubble baths and swimming pools, water treatment, car drying, ventilation / dust removal, etc. tecpool ir lower Specifications onstructive haracteristics: lower pumps constructed entirely in cast aluminum and suitable for continuous operation. Single stage side channel pumps, without any maintenance. 440 400 360 3 61 Sealed asynchronous motor with external ventilation. uiltin thermal protection. Single phase versions includes capacitor. IP55 protection. Isolation class. 280 240 0 160 31 32 42 43 52 1 80 22 40 0 0 1 160 0 240 280 3 360 400 440 Phase ode urve Output Voltage Max low Max Pressure Noise Weight onnection KW V (m³/h) (mbar) (d) Kg inch Three Phase Single Phase 140850 22 0,5 80 130 53 11 1 1/4 2131 31 0,75 145 160 63 16 1 1/2 2161 32 1,1 5 160 63 17 1 1/2 2151 42 1,3 0240 / Y 345 415 2 170 64 22 2 315301 43 1,5 255 2 64 24 2 4321 52 2,2 3 230 69 28 2 505380 61 3 376 4 69 29 2 80400 22M 0,5 80 130 53 11 1 1/4 140131 31M 0,75 145 160 63 16 1 1/2 2151 32M 1,1 230 5 160 63 17 1 1/2 215171 42M 1,3 2 170 64 22 2 315221 43M 1,5 255 2 64 24 2 26 atecpool.com
tecpool Submersible Pumps rain Series tecpool rain / tecpool rain Suitable for draining clean water without abrasive particles. tecpool rain Suitable for draining dirty water, so they are recommended for submerged draining of small flooded area (room, cellar, garage), and other domestic usages. tecpool rain / Specifications 2.850 r.p.m. uiltin thermal protector for single phase motor. Insulation class /. Pump body and prefilter made in polypropylene reinforced with fibreglass. xternal loat Switch for automatic pump operation. Mechanical Seal sets ceramic, graphite and rubber. Oil seal sets. Max liquid temperature 50º. ode Power mp. Max Q. Max Pipe ia Model P KW 230 V / Mono phase (m) (L/) Ø 9 0,35 0,25 1 6 4800 1, 1 1/4 9400 0,55 0,4 1,4 6,5 50 1, 1 1/4 9550 0,75 0,55 2,5 8 6400 1, 1 1/4 9750 1 0,75 3,4 9 9600 1, 1 1/4 9900 1,2 0,9 4 400 1, 1 1/4 0,35 0,25 1 5 4000 1, 1 1/4 400 0,55 0,4 1,4 6 4800 1, 1 1/4 550 0,75 0,55 2,5 6,5 5600 1, 1 1/4 750 1 0,75 3,4 7,5 8800 1, 1 1/4 900 1,2 0,9 4 8,5 9600 1, 1 1/4 tecpool rain I / I tecpool rain I suitable for draining clean water without abrasive particles. tecpool rain I Suitable for draining dirty water, so they are recommended for submerged draining of small flooded area (room, cellar, garage), and other domestic usages. tecpool rain I / I Specifications 2.850 r.p.m. uiltin thermal protector for single phase motor. Insulation class /. Pump body made in Stainless Steel. xternal loat Switch for automatic pump operation Mechanical Seal sets ceramic, graphite and rubber Oil seal sets Max liquid temperature 50º ode Power mp. Max Q. Max Pipe ia Model P KW 230 V / Mono phase (m) (L/) Ø I400 0,55 0,4 1,4 7 5600 1, 1 1/4 I550 0,75 0,55 2,5 8 6400 1, 1 1/4 I750 1 0,75 3,4 9 9600 1, 1 1/4 I900 1,2 0,9 4 400 1, 1 1/4 I10 1,5 1,1 5,2 11 0 1, 1 1/4 I400 0,55 0,4 1,4 6,5 5600 1, 1 1/4 I550 0,75 0,55 2,5 7,5 6400 1, 1 1/4 I750 1 0,75 3,4 8 9600 1, 1 1/4 I900 1,2 0,9 4 9 400 1, 1 1/4 I10 1,5 1,1 5,2 11 0 1, 1 1/4 atecpool.com 27
tecpool Submersible Pumps rain & Sewage Series tecpool rain L / L tecpool rain L suitable for draining clean water without abrasive particles. tecpool rain L Suitable for draining dirty water, so they are recommended for submerged draining of small flooded area (room, cellar, garage), and other domestic usages. ode Power Q. Max. Max Pipe ia Model P KW (m 3 /h) (m) Ø (mm) tecpool rain L / L Specifications uiltin thermal protector for single phase motor. Insulation class /. Pump body luminum (ast Iron on request). xternal loat Switch for automatic pump operation Suction Strainer (ast iron on request). Impeller in luminum (ast iron on request). Mechanical Seal sets ceramic, graphite and rubber Oil seal sets Max liquid temperature 50º 2.850 r.p.m. 230 V / 50z. L370 0.5 0,37 1,5 17 25 L5501 0.75 0,55 3 25 L5502 0.75 0,55 7 14 40 L5503 0.75 0,55 12 51 L7501 1 0,75 1,5 32 25 L7502 1 0,75 7 40 L7503 1 0,75 15 51 L7504 1 0,75 25 64 L10 1.5 1,1 30 76 L15001 2 1,5 15 64 L15002 2 1,5 40 9 76 L400 0.5 0,4 1,5 25 L6001 0.8 0,6 3 23 25 L6002 0.8 0,6 8 15 40 L6003 0.8 0,6 15 8 51 L8501 1.1 0,85 1,5 35 25 L8502 1.1 0,85 8 40 L8503 1.1 0,85 51 L8504 1.1 0,85 15 12 64 tecpool Sewage Q Pump composed of motor, pump, mechanical seal, and thermal protector. Suitable for draning sewage water. ode Power mp low. Max Pipe ia Remark Model P KW (m 3 /h) (m) Ø (mm) Q55025 0.33 0.25 2.7/1.2 5 5 40 Q57037 0.5 0.37 3.4/1.5 5 7 40 Q5055 0.75 0.55 4.4/1.8 5 40 Q7075 1 0.75 5.8/2.2 7 51 Q15711 1.5 1.1 7.5/3.5 15 7 51 Q25715 2 1.5 9/4.8 25 7 63 lange Outlet Q1515 2 1.5 9/4.8 15 51 lange Outlet Q35722 3 2.2 6.2 35 7 75 lange Outlet Q5073 4 3 7.5 50 7 75 lange Outlet Q7574 5 4 9.5 75 7 2 lange Outlet tecpool Sewage Q Specifications uiltin thermal protector for single phase motor Insulation class / Pump body ast Iron Pump housing Stainless Steel xternal loat Switch for automatic pump operation Suction Strainer Impeller ast iron Mechanical Seal sets ceramic, graphite and rubber Oil seal sets Max liquid temperature 50º. 230 / 380 V ~ 50 z 28 atecpool.com
tecpool Prefilters INOX Series Ø N NI Q Ø N NI 1 2 N tecpool Prefilters Inox Inlet and outlet clamps according to IN 1 with connections from N 65 (2 1/2 ) to 0 (8 ) with 3 4 closing handles in ISI316 (depending on model) for a perfect lid seal (odes start with N for Round Models in ISI304 and starts with Q for Square Models in ISI316). ode imensions 1 2 N NI Vol. Lts. Kg. N8080 273 423 260 ½ 1 400 80 80 28 23 N00 3 460 390 ¾ 1 570 0 0 38 45 N125125 400 600 475 ¾ 135 700 125 125 48 87 N150150 400 600 458 1 152 700 150 150 52 87 N00 400 600 430 1 0 800 0 0 58 0 N 500 700 600 1 8 900 85 176 Q080 370 370 330 330 260 3 0 80 34,2 42 Q1 370 370 330 330 260 3 125 0 37,4 42 Q150125 450 450 400 400 290 380 150 125 53,9 77 Q150 435 535 390 490 290 440 150 72,6 5 ast Iron Series tecpool Prefilters ast Iron Inlet and outlet clamps according to IN 1 with connections from N 65 (2 1/2 ) to N 0 (8 ) with 3 closing handles in ISI316 (depending on model) for a perfect lid seal. Pot and prefilter in cast iron. Strainer in stainless steel ISI316. V ode imensions Weight Volume N Pt e e s s ØT NºT N T Ltr 6565 65 145 380 260 415 360 5 5 1 4 38,5 8080 80 160 380 260 415 360 0 0 1 48 39 00 0 0 38o 260 415 360 2 270 2 155 8 40,5 125125 125 2 380 260 415 360 270 155 8 41 150150 150 240 460 340 555 500 380 190 22 8 71 42 00 0 295 460 340 555 500 340 380 340 190 22 8 72 42 V6565 65 145 489 372 338 5 169 5 155 4 78 47 V8080 80 160 489 372 338 0 169 0 155 48 78,5 47 V00 0 0 489 372 338 2 169 2 155 8 79 47 V125125 125 2 489 372 338 169 155 8 80 47 V150150 150 240 489 372 338 169 155 22 8 81 47 atecpool.com 29
30 atecpool.com atecpool.com