LEDEEN GS Series Pneumatic and Hydraulic Actuators
LEDEEN GS Series typical application For on/off or modulating control of any quarter-turn operated valve. Pneumatic Quarter-turn Actuator MODULAR ASSEMBLY Hydraulic Quarter-turn Actuator Consistent engineering design and efficient modular assembly allows increased flexibility to be achieved. Double acting, single cylinder or dual cylinder are combinations readily available to meet specific pipeline application requirements. Pneumatic Cylinder Spring Cartridge Frame Hydraulic Cylinder Symmetric Yoke Canted Yoke 2
Standard Features All models available as double acting or spring return Torque outputs to 5,360 in-lb (60 N m) Open and close travel stops provide ± 3 degrees minimum Scotch yoke mechanism generates powerful opening and closing torque outputs Steel fabricated frame provides rugged foundation of modular assemblies Chrome-plated side load bar with guide block for effective elimination of piston rod deflection Bronze bushing interfaces provide low-friction support of sliding and rotating components Pneumatic Spring Return Actuator Aluminum bronze sliding blocks for a low-friction, low-stress pin connection Steel cylinder assembly provides robust pressure containment for all conditions Nickel-plated cylinder ID ensures sealing surface with excellent corrosion resistance Buna piston seal configurations specifically designed for pneumatic and hydraulic applications Hydraulic Spring Return Actuator Composite guide band on piston provides low-friction guidance and support Steel spring cartridge is fully enclosed from environmental conditions Epoxy-coated prestressed springs provide consistent performance with corrosion protection Seal-welded design construction provides maximum personnel safety standard product characteristics type temperature pressure Pneumatic 0 to 5 psig -22 F to 22 F (3 to 2 barg) Hydraulic (-30 C to 00 C) 5 to 3000 psig (0 to 202 barg) 3
Pneumatic Actuator Standard construction 2 3 5 6 5 3 2 0 6 Pneumatic Double Acting Actuator Pneumatic Spring Return Actuator Item Description Material 2 3 5 6 0 2 3 5 6 Guide Bar Pin Guide Block Sliding Block Cylinder Tie Rod Flange Guide Band Seal Piston Pitson Rod Travel Stop Scotch Yoke Bushing Frame Spring Cartridge Spring /Chrome Plated Aluminum Bronze Teflon and Graphite Buna O-ring Bronze
hydraulic actuator standard consturction 2 3 5 6 5 3 2 0 6 Hydraulic Double Acting Actuator Hydraulic Spring Return Actuator Item Description Material 2 3 5 6 0 2 3 5 6 Guide Bar Pin Guide Block Sliding Block Cylinder Tie Rod Flange Guide Band Seal Piston Piston Rod Travel Stop Scotch Yoke Bushing Frame Spring Cartridge Spring /Chrome Plated Aluminum Bronze Teflon and Graphite Buna Quad-ring Bronze 5
Standard Options Jackscrew override Hand pump override Fluorosilicone seals for low-temperature applications to -6 F (-60 C) Viton seals for high-temperature applications to 32 F (200 C) Pneumatic spring Return Actuator with Jackscrew Override Pneumatic Double Acting Actuator with Jackscrew Override certifications Cameron s LEDEEN GS Series of actuators comply with many industry standards. ISO 00:2000, Quality PED /23/EC, Design Pneumatic Double Acting Actuator with Hand Pump Override SI 25, Safety IEC 650:2000, Integrity (TUV/SIL3) 6
model number designation Cameron offers customizable actuators from the frame type to the override options. A sample of the actuator selection process is shown below. Starting with Step, Frame Type, the actuator components needed to fit the customer s requirements are built. An example model number is shown below, which specifically identifies each variable for selection. 2 3 5 6 GS 6 23 P A SR C 6 JS Manual Override Option (if required) HMO: Hand Pump JS: Jackscrew Spring Cartridge Size (only for spring return models) 0 6 Fail Position (only for spring return models) C: Closed O: Open 5 Actuator Type (only for spring return models) SR: Spring Return Yoke Type A: Canted (GS6 Models only) S: Symmetric Technical data 2 Frame Size 2, 6 3 Product Type P: Pneumatic H: Hydraulic Power Cylinder Size Pneumatic: 0 3 Hydraulic: 0 0 For additional technical data such as torque charts, dimensional drawings, etc., refer to the LEDEEN GS Series actuators technical data packages or contact LEDEEN@c-a-m.com Description Cameron customizes actuators to meet customer needs. The SY series of quarter-turn actuators are offered as hydraulic and pneumatic, double-acting and spring return. Technical Data Frame Type GS ABC kajske aknd;a SY Series SA KJEJ SK AJKa EKRW LKJF JKJ KJ N SY Direct Gas Actuators ABC kajske aknd;a SA KJEJ SK AJKa EKRW LKJF JKJ KJ N ABC kajske aknd;a SA KJEJ SK AJKa EKRW LKJF JKJ KJ N
HEALTH SAFETY AND ENVIRONMENTAL EXCELLENCE 3250 Briarpark Drive, Suite 300 Houston, TX 02 USA Toll Free 00 323 60 Via Gandini 205 Voghera, PV Italy Tel 3 033 333 Learn more about LEDEEN actuators at: www.c-a-m.com/ledeen or email LEDEEN@c-a-m.com www.c-a-m.com/valveautomation or email valveautomation@c-a-m.com HSE Policy Statement At Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt and nothing gets harmed. CAMERON 203 Cameron LEDEEN is a registered trademark of Cameron. Viton is registered trademarks of E.I. DuPont De Nemours & Company. 5/3 AD003V