POWER REACH STACKER The ALPS 15RM is the perfect selection where short length is needed with a high lift capacity. In combination with the powerful components this truck comes with excellent performance.
1.2 1.3 Manufacturer`s type designation Drive:electric(battery or mains) diesel petrol fuel gas manual Technical data sheet 16RM 18RM 30RM Battery 36RM 45RM Basic Dimensions Wheels, Chassis Weights Identification 1.4 Type of operation: hand, pedestrian, standing, seated, Pedestrian order-picker 1.5 Load Capacity / Rated Load Q(kg) 1500 1.6 Load Centre Distance C(mm) 600 1.8 Load distance,centre of drive axle x(mm) 465 to fork 1.9 Wheelbase y(mm) 1500 2.1 Service weight kg 1800 1850 1950 2150 2200 2.2 1300/ 1330/ 1370/ 1470/ Axle loading, laden front/rear kg 2000 2020 2080 2180 2.3 1280/ 1300/ 1350/ 1450/ Axle loading, unladen front/rear kg 520 550 600 700 3.1 Tyres: solid rubber, superelastic, Polyurethane pneumatic, polyurethane 3.2 Tyre size, front ÆxW Æ250 82 3.3 Tyre size, rear ÆxW Æ230 100 3.4 Additional wheels (dimensions) ÆxW Æ124 60 3.5 Wheels, number front/rear 1 +2/2 (x=driven wheels) 3.6 Track width, front b 10(mm) 680 3.7 Track width, rear b 11(mm) 988 1500/ 2200 1480/ 720 4.1 Mast/fork carriage tilt α/β( ) 2/4 forward/backward 4.2 Lowered mast height h 1 (mm) 2196 2396 2096 1796 2096 4.3 Free lift h 2 (mm) 1600 1800-1200 1500 4.4 Lift height h 3 (mm) 1600 1800 3000 3600 4500 4.5 Extended mast height h 4 (mm) 2485 2685 3885 4485 5385 4.9 Height of tiller in drive position min./ max. h 14(mm) 1034/1415 4.15 Lowered height h 13(mm) 50 4.19 Overall length l 1 (mm) 2240 4.20 Length to face of forks l 2 (mm) 1870 4.21 Overall width b 1(mm) 1090
4.22 Fork dimensions s/e/l (mm) 35/100/950(1150) 4.25 Width over forks b 5 (mm) 200~760 4.26 Distance between supports arms/loading surfaces b 4 (mm) 790 4.28 Reach distance l 4(mm) 610 4.32 Ground clearance, centre of wheelbase m 2 (mm) 39 4.33 Aisle width for pallets 1000X1200 crossways Ast (mm) 2730 4.34 Aisle width for pallets 800X1200 lengthways Ast (mm) 2770 4.35 Turning radius Wa (mm) 1726 Performance Data E- Motor 5.1 Travel speed, laden/ unladen km/h 5.0/5.5 5.2 Lift speed, laden/ unladen m/s 1.1/1.65 5.3 Lowering speed, laden/ unladen m/s 1.0/0.95 5.8 Max. gradient performance, laden/ unladen % 5/8 5.10 Service brake Electromagnetic 6.1 Drive motor rating s2 60min kw 1.6 6.2 Lift motor rating at s3 15% kw 3.0 6.3 Battery acc. to DIN, no 3PzS 4Pzs 6.4 Battery voltage, nominal capacity V/Ah 24/270 24/400 Others 6.6 Energy consumption acc. to VDI KWh/h cycle 8.1 Type of drive control MOSFET Control 8.4 sound level at driver`s ear acc.to EN 12053 db(a) 67 ADVANTAGES Combines the counterbalance stacker with the reach-mast. Powerful AC drive unit. Electric power steering. High capacity battery. Optional foldable platform. Fork tilting.
1. CURTIS AC inverter controller carries CANBUS system: The combination provides smooth and continuous AC motor regenerative control. This highly advanced power unit comes with great efficiency and quiet operations with the help of a microprocessor, it also reduces the deterioration of the motor and battery. All functions can be manually set. 2. AC motor drive wheel combines multiple functions like dynamic transmission and braking. The motor and the shaft axle on the driving wheel are arranged vertically. It's secondary gear reduces stress on the primary gear, so the transmission is steady, noise is low but outputs a strong loading capacity. The pivotal bearing is assembled above the reducer, and the screw slot is on the bearing cup, which means the dissembly process is simple. Besides, two dampers and damping springs gives it a strong and powerful drive, with a strong grasp on the ground to prevent slipping. 3. German REMA-CANBUS Our dedicated control handle. The latest CANOPEN, PCB V1.3, not only is it excellent in appearance, smooth in shape, easy to operate and comfortable to touch, it is also equipped with totally integrated circuits making any job stable and safe, comes with high compatibilty. 4. Italian imported hydraulic power unit with strong power, steady operation and low motor noise. Also, it contains safety protection units of antiriot, reducing lowering speed when needed just to ensure the whole truck is always operating under safe conditions. 5. Curtis EPS (electric power steering) comes as standard configruation. The electric power steering assists with smooth and easy steering, which makes the operator's time with the stacker much easier and safer. 6. New protective arm and foot pedal, more convenient, higher protective strength. The protective gears are not easy to deform; they come with high anti-collision performance, so the safety grade improves largely. The foot pedal is longer than the older version, which improves damping performance. The standard configuration is assembled with electric induction protection system. After conducting operations with the new protective arm, the fork can lift normally even when it lifts to a certain height, better safety performance. 7. Various improvements according to the CE regulations, especially concerning the safety and durablity of the stacker: New power control system, the key, emergency stop button, hour meter are all neatly integrated making them more convenient and quick to operate. New German REMA emergency stop button comes as standard configuration, it serves as a quick cut off function for the control circuit, now the circuit is more safe and reliable. The electric box cover is pressed by top grade cold rolled shape steel, with high intensity and durablity. It also has radiating holes, which protects the electric elements in the box effectively. The battery cover is powerful, durable and with memoryeffect, pressed by top grade constructive plastic, this protects the battery effectively. 8. We now have the optional side shift to meet special demands from customers, this function allows the stacker to be operated in unique tight applications.