700 (Electric) (000000-09999) Walk -Behind Scrubber Parts Manual The Safe Scrubbing Alternative R R ES Extended Scrub System North America / International www.tennantco.com MM400 Rev. 0 (09-00) *MM400*
When ordering replacement parts, use the illustrated parts list section in this manual. Before ordering parts or supplies, be sure to have your machine model number and serial number available. Only use TENNANT Company supplied or equivalent parts. Parts and supplies may be ordered online, by phone, or mail from any authorized parts and service center, distributor or from any of the manufacturer s subsidiaries. This machine will provide excellent service. However, the best results will be obtained at minimum costs if: S The machine is operated with reasonable care. S The machine is maintained regularly - per the machine maintenance instructions provided. S The machine is maintained with manufacturer supplied or equivalent parts. MACHINE DATA Please fill out at time of installation for future reference. Model No. -- Serial No. -- Machine Options -- Sales Rep. -- Sales Rep. phone no. -- Customer Number -- Installation Date -- Tennant Company PO Box 4 Minneapolis, MN 440 Phone: (800) --80 or (7) --80 www.tennantco.com FaST -PAK is a US registered and unregistered trademark of Tennant Company. Specifications and parts are subject to change without notice. Copyright E 998--000, 00--00 TENNANT, Printed in U.S.A.
This section on HOW TO USE THIS MANUAL will tell you how to: -- Find important machine information for ordering correct repair parts. -- Find TENNANT part numbers. -- Order TENNANT parts and supplies. HOW TO USE THIS MANUAL HOW TO USE THIS MANUAL IMPORTANT INFORMATION When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual. The model number of your machine is on the side of the machine. The serial number of your machine is printed on the machine data plate located as shown. 700 MM400 ( -9) -
HOW TO USE THIS MANUAL FINDING A TENNANT PART NUMBER This manual contains the following sections: -- HOW TO USE THIS MANUAL -- STANDARD PARTS -- OPTIONS -- BREAKDOWNS -- CROSS REFERENCE The STANDARD PARTS section lists repair parts for standard machines. They are grouped in this general order: -- General wear parts. -- Machine frame and related parts. -- Machine propelling system. -- Scrubbing components. -- Electrical parts. The OPTION section lists repair parts of options. The BREAKDOWN section lists available repair parts of major components. All sections in this manual consist of parts illustrations and corresponding parts lists. The parts illustrations are numbered with Ref numbers which refer to corresponding parts lists. The parts lists include a number of columns of information: -- Ref -- column refers to the reference number on the parts illustration. o -- indicates the part is an assembly. -- indicates the part is included in the assembly listed just before it. -- Part No. -- column lists the TENNANT part number for the part. -- Serial Number -- column indicates the set of machines the part number is applicable to. Serial numbers change when the machine design has been modified. The most current design of the machine is shown in the main illustration, older designs are boxed in a corner of the illustration. -- Description -- column is a brief description of the part. -- Qty. -- column lists the quantity of that part used in that area of the machine. - 700 MM400 (9-0)
HOW TO USE THIS MANUAL NOTE: If a service kit is installed on your machine, be sure to keep the INSTRUCTION BULLETIN which came with the kit. It contains repair parts numbers needed for ordering future parts. NOTE: Fasteners used in this machine may be metric or non-metric. Take care when replacing hardware to replace with same thread size. PLACING AN ORDER Orders may be placed by phone, fax, or by mail. Phone orders may need written confirmation. Follow the steps below to insure prompt delivery:. Identify the model number of your machine.. Identify the serial number of your machine.. Find the part number of the part you need. Do not order by page number or reference number. If you are not able to find the part number, call your TENNANT representative for help or send the old part as a sample. 4. Determine the quantity of the part you need.. Provide the following company information: -- Company name -- Customer ID Number -- Shipping address -- Billing address -- First and last name of person ordering parts -- Telephone number -- Purchase order number. Provide definitive shipping instructions. 700 MM400 ( -9) -
HOW TO USE THIS MANUAL Any claim for loss or damage to a shipment in transit should be filed promptly with the transportation company making the delivery. Shipments will be complete unless the packing list or order acknowledgement indicates items back ordered. If parts received are suspected to be incorrect or defective, please contact the TENNANT representative from whom you ordered the part. They will give authorization for return and/or handle replacement shipments when required. -4 700 MM400 ( -9)
STANDARD PARTS SECTION Contents Page Contents Page Fig. -- Genreal Recommended Maintenance Items... - Fig. -- Brushes, Replacement, Model 700, 700 mm (8 in)... -4 Fig. -- Brushes, Replacement, Model 800, 800 mm ( in)... - Fig. 4 -- Brushes, Replacement, Model 900, 900 mm ( in)... -8 Fig. -- Main Frame and Drive Group... -0 Fig. -- Tire and Rim Assembly, Black... - Fig. 7 -- Scrub Head Lift Group... -4 Fig. 8 -- Scrub Head Kit, Model 700D, 700 mm (8 in)... - Fig. 9 -- Scrub Head Kit, Model 800D, 800 mm ( in)... -9 Fig. 0 -- Scrub Head Kit, Model 900D, 900 mm ( in)... - Fig. -- Scrub Head Kit, Model 800D Heavy Duty, 800 mm ( in)... -4 Fig. -- Scrub Head Drive Group, Model 700C, 700 mm (8 in)... - Fig. -- Scrub Head Frame Group, Model 700C, 700 mm (8 in)... -8 Fig. 4 -- Scrub Head Drive Group, Model 800C, 800 mm ( in)... -0 Fig. -- Scrub Head Frame Group, Model 800C, 800 mm ( in)... - Fig. -- Scrub Head Drive Group, Model 900C, 900 mm ( in)... -4 Fig. 7 -- Scrub Head Frame Group, Model 900C, 900 mm ( in)... - Fig. 8 -- Recovery Tank Group (000000--008)... -8 Fig. 9 -- Recovery Tank Group (009-- )... -40 Fig. 0 -- Solution Tank Group... -4 Fig. -- Vacuum Fan Group... -44 Fig. -- Solution Control Group... -4 Fig. -- Battery Group... -48 Fig. 4 -- Steering Control Group... -0 Fig. -- Operator Console Group (000000--0794)... - Fig. -- Operator Console Group (0794-- )... -4 Fig. 7 -- Electrical Panel Group (000000--0999)... - Fig. 8 -- Electrical Panel Group (0000-- )... -8 Fig. 9 -- Squeegee Lift Group... -0 Fig. 0 -- Squeegee Linkage Group... - Fig. -- Squeegee Tight--Aisle Group, 0 mm ( in)... -4 Fig. -- Squeegee Group, Model 700, 700 mm (8 in)... - Fig. -- Squeegee Group, Model 800, 800 mm ( in)... -8 Fig. 4 -- Squeegee Group, Model 900, 900 mm ( in)... -70 Fig. -- Electrical Schematic (000000--0999)... -7 Fig. -- Electrical Schematic (0000-- )... -74 Fig. 7 -- Electrical Wire Harness Group (000000--0999)... -77 Fig. 8 -- Electrical Wire Harness Group (0000-- )... -80 Fig. 9 -- Label Group... -84 700 MM400 (9-0) -
STANDARD PARTS - 700 MM400 ( -98)
STANDARD PARTS Fig. - Genreal Recommended Maintenance Items 700, XP, NA, CE 8 (000000-- ) Blade, Squeegee,Front, 8 8 (000000-- ) Blade, Squeegee,Rear, 8 o 4 (000000-- ) Squeegee Kit F/Tile Gumrbr 700 8 (000000-- ) Blade, Squeegee,Tile, 8 87 (000000-- ) Blade, Sqge,Rear,Gum, 8 o 48 (000000-- ) Squeegee Kit Oil Rs Urethn 700 9 (000000-- ) Blade, Sqge, Front, 8, Oil Rst 89 (000000-- ) Blade, Sqge, Rear, 8, Oil Rst 4 (000000-- ) Blade, Squeegee,Front, 4 (000000-- ) Blade, Squeegee,Rear, o 4 (000000-- ) Squeegee Kit F/Tile Gumrbr 800 84 (000000-- ) Blade, Squeegee,Tile, 8 (000000-- ) Blade, Sqge,Rear,Gum, o 49 (000000-- ) Squeegee Kit Oil Rs Urethn 800 9 (000000-- ) Blade, Sqge, Front,, Oil Rst 88 (000000-- ) Blade, Sqge, Rear,, Oil Rst 4 (000000-- ) Blade, Squeegee,Front, 4 (000000-- ) Blade, Squeegee,Rear, o 44 (000000-- ) Squeegee Kit F/Tile Gumrbr 900 44 (000000-- ) Blade, Squeegee,Tile, 4 (000000-- ) Blade, Sqge,Rear,Gum, o 4 (000000-- ) Squeegee Kit Oil Rs Urethn 900 44 (000000-- ) Blade, Sqge, Front,, Oil Rst 4 (000000-- ) Blade, Sqge, Rear,, Oil Rst 0 (000000-- ) Wheel,.0 Dia 4 88 (000000-- ) Nut Speed,Retainer,.--0 Thd 78 (000000-- ) Roller, Bumper 40 (000000-- ) Wheel,.0 Dia 40 (000000-- ) Skirt Assy, Disk Head, 8 4 (000000-- ) Skirt Assy, Disk Head, 4 (000000-- ) Skirt, Assy, Disk Head, o 7 (000000-- ) Replm Kit, Brush Skirts 80 (000000-- ) Skirt, Scrub Head 4 (000000--00890 ) Skirt, Deflector 8 (0089-- ) Skirt, Deflector 070 (000000-- ) Detergent Pkg, Liter, Sgl, -- 070 (000000-- ) Detergent Pkg, Liter, Sgl, -- 9000 (000000-- ) Detergent, Liter [Fast 9] -- 700 MM400 (9-0) -
STANDARD PARTS Fig. - Brushes, Replacement, Model 700, 700 mm (8 in) 7 4 4 0 9 8 8 9 0 7-4 700 MM400 ( -0)
STANDARD PARTS Fig. - Brushes, Replacement, Model 700, 700 mm (8 in) 00-8in, NA, CE 04 (000000-- ) Brush--Scr Grout 8 Lg 8Sr Poly 7404 (000000-- ) Brush--Scrub 8 Lg 8Sr Poly 0 (000000-- ) Brush--Scrub 8 Lg 8Sr Nylon 0 (000000-- ) Brush--Scrub 8 Lg 8Sr Ab o (000000-- ) Brush--Disk Scr 4 D Assy--Nylon 488 (000000-- ) Spring, Brush Retaining 4 499 (000000-- ) Bracket, Spring Retainer 084 (000000-- ) Washer, Flat, 0. Ss 74 (000000-- ) Screw, Pan, M X.0 X, Ss o 0 (000000-- ) Brush--Disk Scr 4 D Assy--Poly 488 (000000-- ) Spring, Brush Retaining 4 499 (000000-- ) Bracket, Spring Retainer 084 (000000-- ) Washer, Flat, 0. Ss 74 (000000-- ) Screw, Pan, M X.0 X, Ss o (000000-- ) Brush--Disk Scr 4 D--Assy--Ab 488 (000000-- ) Spring, Brush Retaining 4 499 (000000-- ) Bracket, Spring Retainer 084 (000000-- ) Washer, Flat, 0. Ss 74 (000000-- ) Screw, Pan, M X.0 X, Ss o 7 (000000-- xxxxxx ) Driver, Pad 4 D Assy (Replaced by 7004) 8 499 (000000-- xxxxxx ) Bracket, Spring Retainer 9 488 (000000-- xxxxxx ) Spring, Brush Retaining 0 9 (000000-- xxxxxx ) Adaptor, Brush 8 (000000-- xxxxxx ) Spacer, Pad Holder 978 (000000-- xxxxxx ) Holder, Pad o 7004 ( xxxxxx-- ) Driver, Pad 4 D Assy 4 70074 ( xxxxxx-- ) Back, Pad Drive W/Face 4 Dia. 9 ( xxxxxx-- ) Adaptor, Brush 488 ( xxxxxx-- ) Spring, Brush Retaining 7 499 ( xxxxxx-- ) Bracket, Spring Retainer 8 7009 ( xxxxxx-- ) Centering Device, F/Pad Driver 9 0998 ( xxxxxx-- ) Scr Panssm 4X0.7 0 479 ( xxxxxx-- ) Washer, Flat, #8, Ss 084 ( xxxxxx-- ) Washer, Flat, 0. Ss 74 ( xxxxxx-- ) Screw, Pan, M X.0 X, Ss 4 (000000-- ) Pad, Polish 4D White (000000-- ) Pad, Buff 4D Red (000000-- ) Pad, Scrub 4D Blue 7 (000000-- ) Pad, Strip 4D Brown 7009 (000000-- ) Pad, Strip--Hd 4D Black 700 MM400 ( -0) -
STANDARD PARTS Fig. - Brushes, Replacement, Model 800, 800 mm ( in) 7 4 4 0 9 8 8 9 0 7-700 MM400 ( -0)
STANDARD PARTS Fig. - Brushes, Replacement, Model 800, 800 mm ( in) 00 - in, NA, CE 07 (000000-- ) Brush--Scr Grout Lg 8Sr Poly 7404 (000000-- ) Brush--Scrub Lg 8Sr Poly 08 (000000-- ) Brush--Scrub --Lg--8Sr--Nyl 09 (000000-- ) Brush--Scrub Lg 8Sr Ab o 074 (000000-- ) Brush--Disk Scr D--Assy--Nyl 488 (000000-- ) Spring, Brush Retaining 4 499 (000000-- ) Bracket, Spring Retainer 084 (000000-- ) Washer, Flat, 0. Ss 74 (000000-- ) Screw, Pan, M X.0 X, Ss o 04 (000000-- ) Brush--Disk Scr D Assy Poly 488 (000000-- ) Spring, Brush Retaining 4 499 (000000-- ) Bracket, Spring Retainer 084 (000000-- ) Washer, Flat, 0. Ss 74 (000000-- ) Screw, Pan, M X.0 X, Ss o 07 (000000-- ) Brush--Disk Scr D--Assy--S Ab 488 (000000-- ) Spring, Brush Retaining 4 499 (000000-- ) Bracket, Spring Retainer 084 (000000-- ) Washer, Flat, 0. Ss 74 (000000-- ) Screw, Pan, M X.0 X, Ss o 7 0 (000000-- xxxxxx ) Driver, Pad D Assy (Replaced by 700) 8 499 (000000-- xxxxxx ) Bracket, Spring Retainer 9 488 (000000-- xxxxxx ) Spring, Brush Retaining 0 9 (000000-- xxxxxx ) Adaptor, Brush 8 (000000-- xxxxxx ) Spacer, Pad Holder 978 (000000-- xxxxxx ) Holder, Pad o 700 ( xxxxxx-- ) Driver, Pad D Assy 4 7007 ( xxxxxx-- ) Back, Pad Drive W/Face Dia. 9 ( xxxxxx-- ) Adaptor, Brush 488 ( xxxxxx-- ) Spring, Brush Retaining 7 499 ( xxxxxx-- ) Bracket, Spring Retainer 8 7009 ( xxxxxx-- ) Centering Device, F/Pad Driver 9 0998 ( xxxxxx-- ) Scr Panssm 4X0.7 0 479 ( xxxxxx-- ) Washer, Flat, #8, Ss 084 ( xxxxxx-- ) Washer, Flat, 0. Ss 74 ( xxxxxx-- ) Screw, Pan, M X.0 X, Ss 48-- (000000-- ) Pad, Strip D Brown 48-- (000000-- ) Pad, Scrub D Blue 48-- (000000-- ) Pad, Buff D Red 48--4 (000000-- ) Pad, Polish D White 7009 (000000-- ) Pad, Strip--Hd D Black 700 MM400 ( -0) -7
STANDARD PARTS Fig. 4 - Brushes, Replacement, Model 900, 900 mm ( in) 7 4 4 0 9 8 8 9 0 7-8 700 MM400 ( -0)
STANDARD PARTS Fig. 4 - Brushes, Replacement, Model 900, 900 mm ( in) 00 - in, NA, CE 0 (000000-- ) Brush--Scr Grout Lg 8Sr Poly 7404 (000000-- ) Brush--Scrub Lg 8Sr Poly (000000-- ) Brush--Scrub Lg 8Sr Nylon (000000-- ) Brush--Scrub Lg 8Sr Ab o 77 (000000-- ) Brush--Disk Scr 8 D Assy Nylon 488 (000000-- ) Spring, Brush Retaining 4 499 (000000-- ) Bracket, Spring Retainer 084 (000000-- ) Washer, Flat, 0. Ss 74 (000000-- ) Screw, Pan, M X.0 X, Ss o 77 (000000-- ) Brush--Disk Scr--8 D--Assy--Poly 488 (000000-- ) Spring, Brush Retaining 4 499 (000000-- ) Bracket, Spring Retainer 084 (000000-- ) Washer, Flat, 0. Ss 74 (000000-- ) Screw, Pan, M X.0 X, Ss o 77 (000000-- ) Brush--Disk Scr--8 D Assy Ab 488 (000000-- ) Spring, Brush Retaining 4 499 (000000-- ) Bracket, Spring Retainer 084 (000000-- ) Washer, Flat, 0. Ss 74 (000000-- ) Screw, Pan, M X.0 X, Ss o 7 77 (000000-- xxxxxx ) Driver, Pad 8 D Assy (Replaced by 7008) 8 499 (000000-- xxxxxx ) Bracket, Spring Retainer 9 488 (000000-- xxxxxx ) Spring, Brush Retaining 0 9 (000000-- xxxxxx ) Adaptor, Brush 8 (000000-- xxxxxx ) Spacer, Pad Holder 978 (000000-- xxxxxx ) Holder, Pad o 7008 ( xxxxxx-- ) Driver, Pad 8 D Assy 4 70078 ( xxxxxx-- ) Back, Pad Drive W/Face 8 Dia. 9 ( xxxxxx-- ) Adaptor, Brush 488 ( xxxxxx-- ) Spring, Brush Retaining 7 499 ( xxxxxx-- ) Bracket, Spring Retainer 8 7009 ( xxxxxx-- ) Centering Device, F/Pad Driver 9 0998 ( xxxxxx-- ) Scr Panssm 4X0.7 0 479 ( xxxxxx-- ) Washer, Flat, #8, Ss 084 ( xxxxxx-- ) Washer, Flat, 0. Ss 74 ( xxxxxx-- ) Screw, Pan, M X.0 X, Ss 777 (000000-- ) Pad, Strip 8D Brown 7009 (000000-- ) Pad, Strip--Hd 8D Black 778 (000000-- ) Pad, Scrub 8D Blue 780 (000000-- ) Pad, Buff 8D Red 78 (000000-- ) Pad, Polish 8D White 700 MM400 ( -0) -9
STANDARD PARTS Fig. - Main Frame and Drive Group 9 0 8 7 9 8 9 4 9 0 8 9 4 9 4, 4 7 0 9 7-0 700 MM400 ( -0)
STANDARD PARTS Fig. - Main Frame and Drive Group 00-700, NA, JP 98 (000000-- ) Frame, Main o 97707AM (087-- ) Transaxle Assy, W/O Parking Brake (See Breakdowns) 74AM ( xxxxxx-- ) Motor, Ele, Vdc 0.0Hp 000Rpm (See Breakdowns) 4 0900 (000000-- ) Scr Hexssm 8X. 0 (000000-- ) Isolator, Transaxle 0 (000000-- ) Bracket, Mtg, Isolator 7 098 (000000-- ) Bracket, Support, Frame 8 09 (000000-- ) Bracket, Mtg, Transaxle 9 474 (000000-- ) Isolator--Vibration,Lb.Ratng 0 08 (000000-- ) Bracket, Caster Pad 0484 (000000-- ) Bearing, Flange. Bore 47 (000000-- ) Caster,.0 Dia Wheel 49AM (000000-- ) Spring, Centering 4 787 (000000-- ) Bumper, Rubber 040 (000000-- ) Clip, Keeper, St 04 (000000-- ) Washer, Flt, 0.40b.d., Ss 7 84 (000000--07 ) Chain,Static, Brass 8 7 (000000-- ) Scr--Hexssm 8X. 0 Nylnloc 4 9 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 8 0 090 (000000-- ) Scr Hexssm 8X. 0 4 087 (000000-- ) Nut--Hxlocnyln M 8X. Reg Ss 8 090 (000000-- ) Scr Hexssm 8X. 40 0 (000000--07 ) Scr Hexssm 8X. 4 4 98 (000000-- ) Scr Hexssm 8X. Nylonloc 48 (000000-- ) Washer, Bellville. Pltd 8 (000000-- ) Scr--Hexssm 8X. Nylonloc 7 400 (077-- ) Chain, Coil, Str, #0, 09.0L 07 Link 8 0900 (077-- ) Scr Hexssm 8X. 9 08 (077-- ) Washer, Flat, 0.8b 0.88d.08, Ss 0 087 (077-- ) Nut--Hxlocnyln M 8X. Reg Ss o 07AM (000000--087 ) Transaxle Assy, W/Parking Brake (See Breakdowns) 7 (000000--087 ) Motor,Elec 0.HpV.Dc,000Rpm (See Breakdowns) 078 (000000-- ) Washer, Flt, 0.b.00d., Ss 8 4 7 (087--xxxxxx ) Motor, Ele, Vdc 0.0Hp 900Rpm (Replaced by 74) (See Brealdowns) 700 MM400 (9-0) -
STANDARD PARTS Fig. - Tire and Rim Assembly, Black 4-700 MM400 ( -98)
STANDARD PARTS Fig. - Tire and Rim Assembly, Black 0400 - NA o 787 (000000-- ) Tire and Rim Assembly, Black 74049 (000000-- ) Tire, 4.0/.--, Black 048 (000000-- ) Tube, Inner 047 (000000-- ) Rim 4 09 (000000-- ) Nut, Wheel 700 MM400 (9-99) -
STANDARD PARTS Fig. 7 - Scrub Head Lift Group 4 8 0 8 9 7 7 0 0 8 0 4 0 9-4 700 MM400 ( -00)
STANDARD PARTS Fig. 7 - Scrub Head Lift Group 008-700, EE, NA 07 (000000-- ) Arm, Lift, Head 099 (000000-- ) Spacer, Lift Arm 08 (000000-- ) Sleeve,.44B.D. Bronze 4 488 (000000-- ) Bracket, Tank Support 0 (000000-- ) Pin, Clevis, 0. Dia X.00Lg 094 (000000-- ) Pin,Hair Cotter.Wire.7Sl 7 04 (000000-- ) Bracket, Guide, Roller 8 04 (000000-- ) Bracket, Roller Guide 9 04 (000000-- ) Scr Hexssm 8X. 0 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 9 0 (000000-- ) Bracket, Mounting, Actuator 0 (000000-- ) Replm Kit, Actuator 98 (000000-- ) Pin,Clevis,0.7 Dia.X.0 Lg 4 88 (000000-- ) Pin, Hair Cotter.7D.07Wir 4 (000000-- ) Pin,Clevis,0.0 Dia.X.00 Lg 0407 (000000-- ) Clip, Keeper, Open 7 087 (000000-- ) Nut--Hxlocnyln M 8X. Reg Ss 8 09740 (000000-- ) Scr--Hexssm 8X. 0 9 498 (000000-- ) Scr--Hexssm 8X. Nylon Loc 700 MM400 (9-0) -
STANDARD PARTS Fig. 8 - Scrub Head Kit, Model 700D, 700 mm (8 in) 0 48 49 7 7 7 4 4 0 4 4 0 9 8 8 0 4 9 0 4 8 4 4 4 4 7 4 7 4 4 0 4 4 4 4 8 4 8 44 4 9 4 7 40 8 4 9 4 0 9 4 47-700 MM400 (9-0)
STANDARD PARTS Fig. 8 - Scrub Head Kit, Model 700D, 700 mm (8 in) 0440-700, XP, 8in, NA, JP o 0 (000000-- ) Scrub Head Kit 700D 700 (000000-- ) Cover, Scrub Head 8 Disk (000000-- ) Hose, Vinyl.8Id.Od 8.0L (000000-- ) Fitting--Plastic Tee 0Bm/0Bm/ 4 440 (000000-- ) Gasket, End Bell 77440AM (000-- ) Motor, Ele, vdc 0.0hp 00rpm.0a (See Breakdowns) 8 (000000-- ) Harness, Wire, Disk Head, Elec 7 449 (000000-- ) Tie, Cable 4.00 Max 4.0Lg 4 8 49 (000000-- ) Tie Cable.00D Max.4Lg 9 0088 (000000-- ) Bracket, Mtg, Spring 0 4048 (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 8 (000000-- ) Spring,Comp,.84Odx.0Wire.0L 4 (000000-- ) Sprng,Comp,0.74Idx.Wire.L 078 (0-- ) Screw, Hex,.8-- X.0, G 4 88 (000000-- ) Bracket, Pivot 07 (000000-- ) Pin, Clevis, 0.Dia X4.Lg 084 (000000-- ) Pin, Cotter.X0.7 7 (000000-- ) Spring, Tension 8 774 (000000-- ) Hub, Drive, Brush, Disk, 0.7b t 9 40 (000000-- ) Skirt Assy, Disk Head, 8 0 40 (000000-- ) Wheel,.0 Dia 49 (000000-- ) Sleeve 404 (000000-- ) Door, Scrub Head, Lh 40 (000000-- ) Door, Scrub Head, Rh 4 9849 (000000-- ) Nut, Retainer R/. Dia 9779 (000000-- ) Cover, Front, Trim, [700 Disk] 48 (000000-- ) Washer--Belleville. Pltd 0 7 0 (000000-- ) Roller, Linkage, Head 8 97 (000000-- ) Pin, Clevis 0.0 Dia X 4.7Lg 9 094 (000000-- ) Pin,Hair Cotter.Wire.7Sl 0 009 ( xxxxxx-- ) Key, Square 0. 0. 0.7Lg 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 070 (000000-- ) Scr--Hexssm0X. 40 Full Thd 094 (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss 4 08 (000000-- ) Washer Flt.8 Ss 087 (000000-- ) Nut--Hxlocnyln M 8X. Reg Ss 7 (000000-- ) Washer,.40B.8D.09Ureth 7 94 (000000-- ) Scr--Flt M8 X. 40 8 040 (000000-- ) Clip, Keeper, St 9 09740 ( xxxxxx-- ) Scr Hexss M8 X. 0 40 09007 ( xxxxxx-- ) Scr Hexss M X.0 8 4 9 (000000-- ) Nut, Hex, Std, M0 X. 4 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss 4 490 (000000-- ) Washer, Flat, 0. Std 4 44 08 (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss 4 4 48 (0-- ) Washer, Flt.0 SAE 700 MM400 (9-0) -7
STANDARD PARTS Fig. 8 - Scrub Head Kit, Model 700D, 700 mm (8 in) 47 4 (000000--04 ) Nut, Hex, Lock,.8--, Nl, Thin 48 098 (000000-- xxxxxx ) Scr Hexss.--0X.00 8 49 099 (000000-- xxxxxx ) Scr Hexss.--8X0.7 0 490 (000000-- xxxxxx ) Motor Assy, Elec, (Replaced by 7400) (See Breakdowns) 80 ( xxxxxx--0499 ) Motor Assy, Elec, (Replaced by 77440) (See Breakdowns) 90004 (000000--04 ) Bolt Kit, Shld, F/ 490, Replmt 08 (000000--04 ) Sleeve,.00B.D. Stl 4 48 (000000--04 ) Washer, Flt.0 SAE 4-8 700 MM400 (9-0)
0 Fig. 9 - Scrub Head Kit, Model 800D, 800 mm ( in) STANDARD PARTS 48 49 7 7 7 4 4 0 4 4 0 9 8 8 0 4 9 0 4 8 4 4 4 4 7 4 7 4 4 0 4 4 4 4 8 4 8 44 4 9 4 7 40 8 4 9 4 0 9 4 47 700 MM400 (9-0) -9
STANDARD PARTS Fig. 9 - Scrub Head Kit, Model 800D, 800 mm ( in) 0440-700, XP, in, NA, JP o 0 (000000-- ) Scrub Head Kit 800D 700 (000000-- ) Cover, Scrub Head Disk (000000-- ) Hose, Vinyl.8Id.Od 8.0L (000000-- ) Fitting--Plastic Tee 0Bm/0Bm/ 4 440 (000000-- ) Gasket, End Bell 77440AM (000-- ) Motor, Ele, vdc 0.0hp 00rpm.0a (See Breakdowns) 8 (000000-- ) Harness, Wire, Disk Head, Elec 7 449 (000000-- ) Tie, Cable 4.00 Max 4.0Lg 4 8 49 (000000-- ) Tie Cable.00D Max.4Lg 9 0088 (000000-- ) Bracket, Mtg, Spring 0 4048 (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 8 (000000-- ) Spring,Comp,.84Odx.0Wire.0L 4 (000000-- ) Sprng,Comp,0.74Idx.Wire.L 078 (0-- ) Screw, Hex,.8-- X.0, G 4 88 (000000-- ) Bracket, Pivot 07 (000000-- ) Pin, Clevis, 0.Dia X4.Lg 084 (000000-- ) Pin, Cotter.X0.7 7 (000000-- ) Spring, Tension 8 774 (000000-- ) Hub, Drive, Brush, Disk, 0.7b t 9 4 (000000-- ) Skirt Assy, Disk Head, 0 40 (000000-- ) Wheel,.0 Dia 49 (000000-- ) Sleeve 404 (000000-- ) Door, Scrub Head, Lh 40 (000000-- ) Door, Scrub Head, Rh 4 9849 (000000-- ) Nut, Retainer R/. Dia 9779 (000000-- ) Cover, Front, Trim, [700 Disk] 48 (000000-- ) Washer--Belleville. Pltd 0 7 0 (000000-- ) Roller, Linkage, Head 8 97 (000000-- ) Pin, Clevis 0.0 Dia X 4.7Lg 9 094 (000000-- ) Pin,Hair Cotter.Wire.7Sl 0 009 ( xxxxxx-- ) Key, Square 0. 0. 0.7Lg 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 070 (000000-- ) Scr--Hexssm0X. 40 Full Thd 094 (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss 4 08 (000000-- ) Washer Flt.8 Ss 087 (000000-- ) Nut--Hxlocnyln M 8X. Reg Ss 7 (000000-- ) Washer,.40B.8D.09Ureth 7 94 (000000-- ) Scr--Flt M8 X. 40 8 040 (000000-- ) Clip, Keeper, St 9 09740 ( xxxxxx-- ) Scr Hexss M8 X. 0 40 09007 ( xxxxxx-- ) Scr Hexss M X.0 8 4 9 (000000-- ) Nut, Hex, Std, M0 X. 4 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss 4 490 (000000-- ) Washer, Flat, 0. Std 4 44 08 (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss 4 4 48 (0-- ) Washer, Flt.0 SAE -0 700 MM400 (9-0)
Fig. 9 - Scrub Head Kit, Model 800D, 800 mm ( in) STANDARD PARTS 47 4 (000000--04 ) Nut, Hex, Lock,.8--, Nl, Thin 48 098 (000000-- xxxxxx ) Scr Hexss.--0X.00 8 49 099 (000000-- xxxxxx ) Scr Hexss.--8X0.7 0 490 (000000-- xxxxxx ) Motor Assy, Elec, (Replaced by 7400) (See Breakdowns) 80 ( xxxxxx--0499 ) Motor Assy, Elec, (Replaced by 77440) (See Breakdowns) 90004 (000000--04 ) Bolt Kit, Shld, F/ 490, Replmt 08 (000000--04 ) Sleeve,.00B.D. Stl 4 48 (000000--04 ) Washer, Flt.0 SAE 4 700 MM400 (9-0) -
STANDARD PARTS Fig. 0 - Scrub Head Kit, Model 900D, 900 mm ( in) 0 7 4 7 4 0 48 9 4 7 4 4 9 7 4 0 0 48 4 4 8 8 4 4 8 7 4 9 8 44 0 44 4 4 9 9 40 8 47 8 7 4 8 8 7 44 0 44 4 49-700 MM400 (9-0)
STANDARD PARTS Fig. 0 - Scrub Head Kit, Model 900D, 900 mm ( in) 004-700, XP, in, NA, JP o 04 (000000-- ) Scrub Head Kit 900D 700 (000000-- ) Cover, Scrub Head Disk (000000-- ) Hose, Vinyl.8Id.Od 8.0L (000000-- ) Fitting--Plastic Tee 0Bm/0Bm/ 4 AM (000000-- ) Motor, Gear,.0Hp V (See Breakdowns) 0 (000000-- ) Plate, Adaptor, Motor 87 (000000-- ) Harness, Wire, Disk Head, Elec 7 449 (000000-- ) Tie, Cable 4.00 Max 4.0Lg 8 49 (000000-- ) Tie Cable.00D Max.4Lg 9 0088 (000000-- ) Bracket, Mtg, Spring 0 4048 (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 8 (000000-- ) Spring,Comp,.84Odx.0Wire.0L 4 (000000-- ) Sprng,Comp,0.74Idx.Wire.L 078 (0-- ) Screw, Hex,.8-- X.0, G 4 88 (000000-- ) Bracket, Pivot 07 (000000-- ) Pin, Clevis, 0.Dia X4.Lg 084 (000000-- ) Pin, Cotter.X0.7 7 (000000-- ) Spring, Tension 8 774 (000000-- ) Hub, Drive, Brush, Disk, 0.7b t 9 4 (000000-- ) Skirt, Assy, Disk Head 0 40 (000000-- ) Wheel,.0 Dia 49 (000000-- ) Sleeve 404 (000000-- ) Door, Scrub Head, Lh 40 (000000-- ) Door, Scrub Head, Rh 4 9849 (000000-- ) Nut, Retainer R/. Dia 9779 (000000-- ) Cover, Front, Trim, [700 Disk] 87 (0794-- ) Breaker, Circuit, Amp 7 07 (000000-- ) Ring, Spacer 8 48 (000000-- ) Washer--Belleville. Pltd 9 0 (000000-- ) Roller, Linkage, Head 0 97 (000000-- ) Pin, Clevis 0.0 Dia X 4.7Lg 094 (000000-- ) Pin,Hair Cotter.Wire.7Sl 090 (000000-- ) Scr Hexssm 8X. 0 8 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 4 087 (000000-- ) Nut--Hxlocnyln M 8X. Reg Ss 0 070 (000000-- ) Scr--Hexssm0X. 40 Full Thd 099 (000000-- ) Scr--Hex.--8X.0 Ss 7 08 (000000-- ) Washer Flt.8 Ss 8 7 (000000-- ) Washer,.40B.8D.09Ureth 9 94 (000000-- ) Scr--Flt M8 X. 40 40 040 (000000-- ) Clip, Keeper, St 4 094 (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss 4 9 (000000-- ) Nut, Hex, Std, M0 X. 4 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss 44 490 (000000-- ) Washer, Flat, 0. Std 4 4 4899 (000000-- ) Screw, Flt,.8-- X 0.7, Al 8 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss 4 47 08 (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss 48 48 (0-- ) Washer, Flt.0 SAE 49 99 (000000--0794 ) Breaker, Circuit, Amp 0 90004 (000000--04 ) Bolt Kit, Shld, F/ 490, Replmt 08 (000000--04 ) Sleeve,.00B.D. Stl 48 (000000--04 ) Washer, Flt.0 SAE 4 4 (000000--04 ) Nut, Hex, Lock,.8--, Nl, Thin 700 MM400 (9-0) -
STANDARD PARTS Fig. - Scrub Head Kit, Model 800D Heavy Duty, 800 mm ( in) 0 7 4 7 4 0 48 9 4 7 4 4 9 7 4 0 0 48 4 4 8 8 4 4 8 7 4 9 8 44 0 44 4 4 9 9 40 8 47 8 7 4 8 8 7 44 0 44 4 49-4 700 MM400 (9-0)
STANDARD PARTS 004-700, XP, HDin, NA, JP Fig. - Scrub Head Kit, Model 800D Heavy Duty, 800 mm ( in) o 0 (000000-- ) Scrub Head Kit Hd 800D700 (000000-- ) Cover, Scrub Head Disk (000000-- ) Hose, Vinyl.8Id.Od 8.0L (000000-- ) Fitting--Plastic Tee 0Bm/0Bm/ 4 AM (000000-- ) Motor, Gear,.0Hp V (See Breakdowns) 0 (000000-- ) Plate, Adaptor, Motor 87 (000000-- ) Harness, Wire, Disk Head, Elec 7 449 (000000-- ) Tie, Cable 4.00 Max 4.0Lg 8 49 (000000-- ) Tie Cable.00D Max.4Lg 9 0088 (000000-- ) Bracket, Mtg, Spring 0 4048 (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 8 (000000-- ) Spring,Comp,.84Odx.0Wire.0L 4 (000000-- ) Sprng,Comp,0.74Idx.Wire.L 078 (0-- ) Screw, Hex,.8-- X.0, G 4 88 (000000-- ) Bracket, Pivot 07 (000000-- ) Pin, Clevis, 0.Dia X4.Lg 084 (000000-- ) Pin, Cotter.X0.7 7 (000000-- ) Spring, Tension 8 774 (000000-- ) Hub, Drive, Brush, Disk, 0.7b t 9 4 (000000-- ) Skirt Assy, Disk Head, 0 40 (000000-- ) Wheel,.0 Dia 49 (000000-- ) Sleeve 404 (000000-- ) Door, Scrub Head, Lh 40 (000000-- ) Door, Scrub Head, Rh 4 9849 (000000-- ) Nut, Retainer R/. Dia 9779 (000000-- ) Cover, Front, Trim, [700 Disk] 87 (0794-- ) Breaker, Circuit, Amp 7 07 (000000-- ) Ring, Spacer 8 48 (000000-- ) Washer--Belleville. Pltd 9 0 (000000-- ) Roller, Linkage, Head 0 97 (000000-- ) Pin, Clevis 0.0 Dia X 4.7Lg 094 (000000-- ) Pin,Hair Cotter.Wire.7Sl 090 (000000-- ) Scr Hexssm 8X. 0 8 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 4 087 (000000-- ) Nut--Hxlocnyln M 8X. Reg Ss 0 070 (000000-- ) Scr--Hexssm0X. 40 Full Thd 099 (000000-- ) Scr--Hex.--8X.0 Ss 7 08 (000000-- ) Washer Flt.8 Ss 8 7 (000000-- ) Washer,.40B.8D.09Ureth 9 94 (000000-- ) Scr--Flt M8 X. 40 40 040 (000000-- ) Clip, Keeper, St 4 094 (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss 4 9 (000000-- ) Nut, Hex, Std, M0 X. 4 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss 44 490 (000000-- ) Washer, Flat, 0. Std 4 4 4899 (000000-- ) Screw, Flt,.8-- X 0.7, Al 8 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss 4 47 08 (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss 48 48 (0-- ) Washer, Flt.0 SAE 49 99 (000000--0794 ) Breaker, Circuit, Amp 0 90004 (000000--04 ) Bolt Kit, Shld, F/ 490, Replmt 08 (000000--04 ) Sleeve,.00B.D. Stl 48 (000000--04 ) Washer, Flt.0 SAE 4 4 (000000--04 ) Nut, Hex, Lock,.8--, Nl, Thin 700 MM400 (9-0) -
STANDARD PARTS Fig. - Scrub Head Drive Group, Model 700C, 700 mm (8 in) 0 8 4 40 7 9 7 8 4 4 7 8 0 0 9 4 4 4 0 9 7 4 8 4 0 9 0 8 4 4 7 4 44 44 0 0 8 4 9 7 9 8 4 0-700 MM400 ( -0)
STANDARD PARTS 0049-700, XP, 8in, NA, JP Fig. - Scrub Head Drive Group, Model 700C, 700 mm (8 in) NOTE: Scrub Head Kit, Tennant Part Number 0, includes Fig., and Fig.. 7 (000000--0880 ) Motor,.7 Hp, V, 700Rpm (See Breakdowns) 77AM (088-- ) Motor Assy, Ele, V, 0.7Hp, 700Rpm (See Breakdowns) 7 (000000--00890 ) Bracket, Mounting, Motor 4 (0089-- ) Bracket, Mounting, Motor 79 (000000-- ) Sprocket, Drive 4 087 (000000-- ) Nut--Hxlocnyln M 8X. Reg Ss 4 770 (000000-- ) Belt, Replmt, Brush Drive, F/0 74 (000000--00890 ) Guard, Belt, Rh 7 7 (000000--00890 ) Guard, Belt, Lh o 7 (000000-- ) Plug Drive Assy 8 7 (000000-- ) Shaft, Drive Plug 9 77 (000000-- ) Plug, Drive, Brush, [48 Tooth -- Gt/] 0 40AM (000000-- ) Bearing--Ball,0.9B.D 0.W 0 (000000-- ) Ring,Retain,Ex,0.9Od,Basic o 7408 (000000-- ) Door Assy, Brush 940 (000000-- ) Door, Brush o 7 (000000-- ) Plug Idler Assy 77 (000000-- ) Shaft, Idler Plug 4 84 (000000-- ) Pin, Roll 790 (000000-- ) Plug, Brush 0 (000000-- ) Ring,Retain,Ex,0.9Od,Basic 7 80 (000000-- ) Skirt, Scrub Head 8 087 (000000-- ) Nut--Hxlocnylon M 8X. Reg Ss 9 8 (000000-- ) Bar, Support 0 74077 (000000-- ) Scr--Flt M8 X. Ss 9099 (000000-- ) Scr--Flt M0 X. 0, Ss Nl 0780 (000000-- ) Scr Flt M8 x. 4 449 (000000-- ) Tie, Cable 4.00D Max 4.0 Lg 4 084 (000000-- ) Washer Flt. Ss 4 74077 (000000-- ) Screw, Flat,M 8X. Ss 09740 (000000-- ) Scr Hexssm 8X. 7 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 8 09 (000000-- ) Spring, Door 9 79 (000000--00890 ) Shield, Belt 0 88 (000000-- ) Scr--Set 8-- X. Nylon Loc 4 80 (000000--00890 ) Bracket, Shield (000000--00890 ) Skirt, Deflector 8 (0089-- ) Skirt, Deflector 4 (0089-- ) Bracket, Shield 9 (0089-- ) Gasket, Shield (0089-- ) Shield, Belt 7 78 (0089-- ) Screw, Hex, M0 X.0 X, Ss 4 8 0 (0089-- ) Guard, Belt, Rh 9 (0089-- ) Guard, Belt, Lh 40 7099 (000000-- ) Scr--Hxfmg M8 X. 4 4 80 (000000-- ) Skirt, Scrub Head 4 8 (000000-- ) Bar, Support 4 8 (000000--00890 ) Replm Kit, Seal 44 80 (000000-- ) Seal, Ring 4 094 (000000-- ) Screw, Hex, M0--.0 X 4 4 000 (000000-- ) Tool, Removal, Shaft, F/ 7 700 MM400 (9-0) -7
STANDARD PARTS Fig. - Scrub Head Frame Group, Model 700C, 700 mm (8 in) 8 7 0 9 4 0 8 9 49 4 8 7 7 8 9 9 40 9 4 44 44 4 7 0 4 7 0 0 4 4 4 4 4 9 8 4 7 4 48 47 4-8 700 MM400 (9-0)
STANDARD PARTS 00-700, XP, 8in, NA, JP Fig. - Scrub Head Frame Group, Model 700C, 700 mm (8 in) NOTE: Scrub Head Kit, Tennant Part Number 0, includes Fig., and Fig.. 74009 (000000--00890 ) Housing, Cyl, Replacement 8 04 (0089-- ) Housing, Cyl, Mach, 700mm 8 (000000-- ) Harness, Wire, Cyl Head, Elec 49 (000000-- ) Tie Cable.00D Max.4Lg 4 0088 (000000-- ) Bracket, Mtg, Spring 08 (000000--04 ) Sleeve,.00B.D. Stl 8 (000000-- ) Spring,Comp,.84Odx.0Wire.0L 7 4 (000000-- ) Sprng,Comp,0.74Idx.Wire.L 8 90004 (000000--04 ) Bolt Kit, Shld, F/ 490, Replmt 9 88 (000000-- ) Bracket, Pivot 0 07 (000000-- ) Pin, Clevis, 0.Dia X4.Lg 084 (000000-- ) Pin, Cotter.X0.7 (000000-- ) Spring, Tension 78 (000000-- ) Roller, Bumper 4 79 (000000-- ) Bracket, Mounting, Roller 9 (000000-- ) Pin, Roller 084 (000000-- ) Pin, Cotter.X0.7 o 84 (000000-- ) Debris Tray Kit, 8 in 7 7 (000000-- ) Tray, Debris, 8 8 0 (000000-- ) Lip, Debris Tray, 8 9 9 (000000-- ) Skirt, Debris Tray 0 70 (000000-- ) Strip, Debris Tray 09007 (000000-- ) Scr--HexssmX.0 4 084 (000000-- ) Washer Flt. Ss 744 (000000-- ) Scr--Hxfmg M X.0 0 4 08708 (000000-- ) Nut, Hex, Lock, M X.0, Nl 4 97 (000000-- ) Pin, Clevis 0.0 Dia X 4.7Lg 094 (000000-- ) Pin,Hair Cotter.Wire.7Sl 7 070 (000000-- ) Scr--Hexssm0X. 40 Full Thd 8 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 9 48 (000000--04 ) Washer, Flt.0 SAE 4 0 7400 (000000-- ) Channel 97794 (000000-- ) Cover, Front, Trim, [700 Cyl] (000000-- ) Fitting--Plastic Tee 0Bm/0Bm/ (000000-- ) Bracket, Hose Guide 4 090 (000000-- ) Screw, Hex, M08 X. X, Ss 087 (000000-- ) Nut, Hex, Lock, M08 X., Nl, Ss 74 ( xxxxxx-- ) Roller, Rwk 7 4 ( xxxxxx-- ) Washer, 0.b.7d., Stl, Pl 8 97 ( xxxxxx-- ) Spring, Cmpr, 0.8od.08wir.0l 9 4 (000000--04 ) Nut, Hex, Lock,.8--, Nl, Thin 40 08 (000000--04 ) Washer, Flat, 0.8b 0.88d.08, Ss 4 9 (000000-- ) Nut, Hex, Std, M0 X. 4 7099 (000000-- ) Screw, Hex, M8 X. X, Fmg 4 0 (000000-- xxxxxx ) Roller, Linkage, Head 44 094 (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss 4 4048 (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss 47 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss 48 08 (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss 49 078 (0-- ) Screw, Hex,.8-- X.0, G 0 48 (0-- ) Washer, Flt.0 SAE 700 MM400 (9-0) -9
STANDARD PARTS Fig. 4 - Scrub Head Drive Group, Model 800C, 800 mm ( in) 0 8 4 40 7 9 7 8 4 4 7 8 0 0 9 4 4 4 0 9 7 4 8 4 0 9 0 8 4 4 7 4 44 44 0 0 8 4 9 7 9 8 4 0-0 700 MM400 ( -0)
STANDARD PARTS 0049-700, EE, XP, in, NA, JP Fig. 4 - Scrub Head Drive Group, Model 800C, 800 mm ( in) NOTE: Scrub Head Kit, Tennant Part Number 0, includes Fig. 4, and Fig.. 7 (000000--0880 ) Motor,.7 Hp, V, 700Rpm (See Breakdowns) 77AM (088-- ) Motor Assy, Ele, V, 0.7Hp, 700Rpm (See Breakdowns) 7 (000000--0088 ) Bracket, Mounting, Motor 4 (0089-- ) Bracket, Mounting, Motor 79 (000000-- ) Sprocket, Drive 4 087 (000000-- ) Nut--Hxlocnyln M 8X. Reg Ss 4 770 (000000-- ) Belt, Replmt, Brush Drive, F/0 74 (000000--0088 ) Guard, Belt, Rh 7 7 (000000--0088 ) Guard, Belt, Lh o 7 (000000-- ) Plug Drive Assy 8 7 (000000-- ) Shaft, Drive Plug 9 77 (000000-- ) Plug, Drive, Brush, [48 Tooth -- Gt/] 0 40AM (000000-- ) Bearing--Ball,0.9B.D 0.W 0 (000000-- ) Ring,Retain,Ex,0.9Od,Basic o 7408 (000000-- ) Door Assy, Brush 940 (000000-- ) Door, Brush o 7 (000000-- ) Plug Idler Assy 77 (000000-- ) Shaft, Idler Plug 4 84 (000000-- ) Pin, Roll 790 (000000-- ) Plug, Brush 0 (000000-- ) Ring,Retain,Ex,0.9Od,Basic 7 80 (000000-- ) Skirt, Scrub Head 8 087 (000000-- ) Nut--Hxlocnylon M 8X. Reg Ss 9 8 (000000-- ) Bar, Support 0 74077 (000000-- ) Scr--Flt M8 X. Ss 9099 (000000-- ) Scr--Flt M0 X. 0, Ss Nl 0780 (000000-- ) Scr Flt M8 x. 4 449 (000000-- ) Tie, Cable 4.00D Max 4.0 Lg 4 084 (000000-- ) Washer Flt. Ss 4 74077 (000000-- ) Screw, Flat,M 8X. Ss 09740 (000000-- ) Scr Hexssm 8X. 7 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 8 09 (000000-- ) Spring, Door 9 79 (000000--0088 ) Shield, Belt 0 88 (000000-- ) Scr--Set 8-- X. Nylon Loc 4 80 (000000--0088 ) Bracket, Shield (000000--0088 ) Skirt, Deflector 8 (0089-- ) Skirt, Deflector 4 (0089-- ) Bracket, Shield 9 (0089-- ) Gasket, Shield (0089-- ) Shield, Belt 7 78 (0089-- ) Screw, Hex, M0 X.0 X, Ss 4 8 0 (0089-- ) Guard, Belt, Rh 9 (0089-- ) Guard, Belt, Lh 40 7099 (000000-- ) Scr--Hxfmg M8 X. 4 4 80 (000000-- ) Skirt, Scrub Head 4 8 (000000-- ) Bar, Support 4 8 (000000--0088 ) Replm Kit, Seal 44 80 (000000-- ) Seal, Ring 4 094 (000000-- ) Screw, Hex, M0--.0 X 4 4 000 (000000-- ) Tool, Removal, Shaft, F/ 7 700 MM400 (9-0) -
STANDARD PARTS Fig. - Scrub Head Frame Group, Model 800C, 800 mm ( in) 8 7 0 9 4 0 8 9 49 4 8 7 7 8 9 9 40 9 4 44 44 4 7 0 4 7 0 0 4 4 4 4 4 9 8 4 7 4 48 47 4-700 MM400 (9-0)
STANDARD PARTS 00-700, EE, XP, in, NA, JP Fig. - Scrub Head Frame Group, Model 800C, 800 mm ( in) NOTE: Scrub Head Kit, Tennant Part Number 0, includes Fig. 4, and Fig.. 7400 (000000--0088 ) Housing, Cyl, Replacement 0 (0089-- ) Housing, Cyl, Mach, 800mm 8 (000000-- ) Harness, Wire, Cyl Head, Elec 49 (000000-- ) Tie Cable.00D Max.4Lg 4 0088 (000000-- ) Bracket, Mtg, Spring 08 (000000--04 ) Sleeve,.00B.D. Stl 8 (000000-- ) Spring,Comp,.84Odx.0Wire.0L 7 4 (000000-- ) Sprng,Comp,0.74Idx.Wire.L 8 90004 (000000--04 ) Bolt Kit, Shld, F/ 490, Replmt 9 88 (000000-- ) Bracket, Pivot 0 07 (000000-- ) Pin, Clevis, 0.Dia X4.Lg 084 (000000-- ) Pin, Cotter.X0.7 (000000-- ) Spring, Tension 78 (000000-- ) Roller, Bumper 4 79 (000000-- ) Bracket, Mounting, Roller 9 (000000-- ) Pin, Roller 084 (000000-- ) Pin, Cotter.X0.7 o 8 (000000-- ) Debris Tray Kit, in 7 90 (000000-- ) Tray, Debris, 8 04 (000000-- ) Lip, Debris Tray 9 9 (000000-- ) Skirt, Debris Tray 0 70 (000000-- ) Strip, Debris Tray 09007 (000000-- ) Scr--HexssmX.0 4 084 (000000-- ) Washer Flt. Ss 744 (000000-- ) Scr--Hxfmg M X.0 0 4 08708 (000000-- ) Nut, Hex, Lock, M X.0, Nl 4 97 (000000-- ) Pin, Clevis 0.0 Dia X 4.7Lg 094 (000000-- ) Pin,Hair Cotter.Wire.7Sl 7 070 (000000-- ) Scr--Hexssm0X. 40 Full Thd 8 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 9 48 (000000--04 ) Washer, Flt.0 SAE 4 0 74007 (000000-- ) Channel 97794 (000000-- ) Cover, Front, Trim, [700 Cyl] (000000-- ) Fitting--Plastic Tee 0Bm/0Bm/ (000000-- ) Bracket, Hose Guide 4 090 (000000-- ) Screw, Hex, M08 X. X, Ss 087 (000000-- ) Nut, Hex, Lock, M08 X., Nl, Ss 74 ( xxxxxx-- ) Roller, Rwk 7 4 ( xxxxxx-- ) Washer, 0.b.7d., Stl, Pl 8 97 ( xxxxxx-- ) Spring, Cmpr, 0.8od.08wir.0l 9 4 (000000--04 ) Nut, Hex, Lock,.8--, Nl, Thin 40 08 (000000--04 ) Washer, Flat, 0.8b 0.88d.08, Ss 4 9 (000000-- ) Nut, Hex, Std, M0 X. 4 7099 (000000-- ) Screw, Hex, M8 X. X, Fmg 4 0 (000000-- xxxxxx ) Roller, Linkage, Head 44 094 (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss 4 4048 (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss 47 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss 48 08 (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss 49 078 (0-- ) Screw, Hex,.8-- X.0, G 0 48 (0-- ) Washer, Flt.0 SAE 700 MM400 (9-0) -
STANDARD PARTS Fig. - Scrub Head Drive Group, Model 900C, 900 mm ( in) 0 8 4 40 7 9 7 8 4 4 7 8 0 0 9 4 4 4 9 7 4 8 4 0 9 0 4 4 7 44 4 44 0 0 8 4 9 7 9 8 4 0-4 700 MM400 ( -0)
STANDARD PARTS 8-700, XP, in, NA, JP Fig. - Scrub Head Drive Group, Model 900C, 900 mm ( in) NOTE: Scrub Head Kit, Tennant Part Number 07, includes Fig., and Fig. 7. 7 (000000--0880 ) Motor,.7 Hp, V, 700Rpm (See Breakdowns) 77AM (088-- ) Motor Assy, Ele, V, 0.7Hp, 700Rpm (See Breakdowns) 7 (000000--009 ) Bracket, Mounting, Motor 4 (0089-- ) Bracket, Mounting, Motor 79 (000000-- ) Sprocket, Drive 4 087 (000000-- ) Nut--Hxlocnyln M 8X. Reg Ss 4 770 (000000-- ) Belt, Replmt, Brush Drive, F/0 74 (000000--009 ) Guard, Belt, Rh 7 7 (000000--009 ) Guard, Belt, Lh o 7 (000000-- ) Plug Drive Assy 8 7 (000000-- ) Shaft, Drive Plug 9 77 (000000-- ) Plug, Drive, Brush, [48 Tooth -- Gt/] 0 40AM (000000-- ) Bearing--Ball,0.9B.D 0.W 0 (000000-- ) Ring,Retain,Ex,0.9Od,Basic o 7408 (000000-- ) Door Assy, Brush 940 (000000-- ) Door, Brush o 7 (000000-- ) Plug Idler Assy 77 (000000-- ) Shaft, Idler Plug 4 84 (000000-- ) Pin, Roll 790 (000000-- ) Plug, Brush 0 (000000-- ) Ring,Retain,Ex,0.9Od,Basic 7 80 (000000-- ) Skirt, Scrub Head 8 087 (000000-- ) Nut--Hxlocnylon M 8X. Reg Ss 9 8 (000000-- ) Bar, Support 0 74077 (000000-- ) Scr--Flt M8 X. Ss 9099 (000000-- ) Scr--Flt M0 X. 0, Ss Nl 0780 (000000-- ) Scr Flt M8 x. 4 449 (000000-- ) Tie, Cable 4.00D Max 4.0 Lg 4 084 (000000-- ) Washer Flt. Ss 4 74077 (000000-- ) Screw, Flat,M 8X. Ss 09740 (000000-- ) Scr Hexssm 8X. 7 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 8 09 (000000-- ) Spring, Door 9 79 (000000--009 ) Shield, Belt 0 88 (000000-- ) Scr--Set 8-- X. Nylon Loc 4 80 (000000--009 ) Bracket, Shield (000000--009 ) Skirt, Deflector 8 (009-- ) Skirt, Deflector 4 (009-- ) Bracket, Shield 9 (009-- ) Gasket, Shield (009-- ) Shield, Belt 7 78 (009-- ) Screw, Hex, M0 X.0 X, Ss 4 8 0 (009-- ) Guard, Belt, Rh 9 (009-- ) Guard, Belt, Lh 40 7099 (000000-- ) Scr--Hxfmg M8 X. 4 4 80 (000000-- ) Skirt, Scrub Head 4 8 (000000-- ) Bar, Support 4 8 (000000--009 ) Replm Kit, Seal 44 80 (000000-- ) Seal, Ring 4 094 (000000-- ) Screw, Hex, M0--.0 X 4 4 000 (000000-- ) Tool, Removal, Shaft, F/ 7 700 MM400 (9-0) -
STANDARD PARTS Fig. 7 - Scrub Head Frame Group, Model 900C, 900 mm ( in) 8 0 7 9 4 0 9 8 9 9 40 9 4 44 4 7 0 8 7 49 4 44 4 7 0 0 7 8 4 4 4 4 4 4 9 8 7 47 48 4 4-700 MM400 (9-0)
STANDARD PARTS 8-700, XP, in, NA, JP Fig. 7 - Scrub Head Frame Group, Model 900C, 900 mm ( in) NOTE: Scrub Head Kit, Tennant Part Number 07, includes Fig., and Fig. 7. 740 (000000--009 ) Housing, Cyl, Replacement 0 (009-- ) Housing, Cyl, Mach, 900mm 8 (000000-- ) Harness, Wire, Cyl Head, Elec 49 (000000-- ) Tie Cable.00D Max.4Lg 4 0088 (000000-- ) Bracket, Mtg, Spring 08 (000000--04 ) Sleeve,.00B.D. Stl 8 (000000-- ) Spring,Comp,.84Odx.0Wire.0L 7 4 (000000-- ) Sprng,Comp,0.74Idx.Wire.L 8 90004 (000000--04 ) Bolt Kit, Shld, F/ 490, Replmt 9 88 (000000-- ) Bracket, Pivot 0 07 (000000-- ) Pin, Clevis, 0.Dia X4.Lg 084 (000000-- ) Pin, Cotter.X0.7 (000000-- ) Spring, Tension 78 (000000-- ) Roller, Bumper 4 79 (000000-- ) Bracket, Mounting, Roller 9 (000000-- ) Pin, Roller 084 (000000-- ) Pin, Cotter.X0.7 o 8 (000000-- ) Debris Tray Kit, in 7 400 (000000-- ) Tray, Debris, 8 0 (000000-- ) Lip, Debris Tray, 9 9 (000000-- ) Skirt, Debris Tray 0 70 (000000-- ) Strip, Debris Tray 09007 (000000-- ) Scr--HexssmX.0 4 084 (000000-- ) Washer Flt. Ss 744 (000000-- ) Scr--Hxfmg M X.0 0 4 08708 (000000-- ) Nut, Hex, Lock, M X.0, Nl 4 97 (000000-- ) Pin, Clevis 0.0 Dia X 4.7Lg 094 (000000-- ) Pin,Hair Cotter.Wire.7Sl 7 070 (000000-- ) Scr--Hexssm0X. 40 Full Thd 8 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 9 48 (000000--04 ) Washer, Flt.0 SAE 4 0 74008 (000000-- ) Channel 97794 (000000-- ) Cover, Front, Trim, [700 Cyl] (000000-- ) Fitting--Plastic Tee 0Bm/0Bm/ (000000-- ) Bracket, Hose Guide 4 090 (000000-- ) Screw, Hex, M08 X. X, Ss 087 (000000-- ) Nut, Hex, Lock, M08 X., Nl, Ss 74 ( xxxxxx-- ) Roller, Rwk 7 4 ( xxxxxx-- ) Washer, 0.b.7d., Stl, Pl 8 97 ( xxxxxx-- ) Spring, Cmpr, 0.8od.08wir.0l 9 4 (000000-- ) Nut, Hex, Lock,.8--, Nl, Thin 40 08 (000000--04 ) Washer, Flat, 0.8b 0.88d.08, Ss 4 9 (000000-- ) Nut, Hex, Std, M0 X. 4 7099 (000000-- ) Screw, Hex, M8 X. X, Fmg 4 0 (000000-- xxxxxx ) Roller, Linkage, Head 44 094 (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss 4 4048 (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss 47 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss 48 08 (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss 49 078 (0-- ) Screw, Hex,.8-- X.0, G 0 48 (0-- ) Washer, Flt.0 SAE 700 MM400 (9-0) -7
STANDARD PARTS Fig. 8 - Recovery Tank Group (000000-008) 9 8 0 7 7 8 7 4 7 0 4 0 9 4 4 8 9 0 4-8 700 MM400 ( -04)
STANDARD PARTS Fig. 8 - Recovery Tank Group (000000-008) 00-700, EE, XP, NA 98440 (000000--008 ) Tank, Recovery 7 (000000--008 ) Ftg--Plug Npt Pm Rd Hd Plstc. (000000--008 ) Hose, Inlet Recovery Tank 4 79 (000000--09 ) Clip, Hose, Hanger 7409 (000000--008 ) Hose & Cuff Assy, Drain.Id 7.L 0 (000000--000 ) Washer,.0B.00D. Rbr 7 04400 (000000--000 ) Washer-- Flt 7 X0X Ss M 8 94 (000000--008 ) Hose, Drain, Flex 9 (000000--008 ) Tube, Drain 0 09740 (000000--008 ) Scr--Hexssm 8X. 0 788 (000000--008 ) Hose, Drain, Tank, Solution 99 (000000--008 ) Clamp--Wormdrive, 0.8--.0D 7 (000000--008 ) Strap, Cap Retainer 4 74 (000000--008 ) Plug, Expandable.00 Dia 79 (000000--008 ) Clip, Hose, Hanger 44 (000000--008 ) Clamp--Wormdrive,.8--.7D 7 8 (000000--008 ) Strap, Drainhose 8 9880 (000000--008 ) Plug, Expandable.D X.7L 9 7400 (000000--008 ) Hose & Cuff Assy, Vacuum.D L 0 87 (000000--0047 ) Sensor Kit, Liq Level 797-- (000000--008 ) Ftg,Plstc,Cplg,Barb.7Pt--.0Hs 7 (000000--008 ) Cable Assy, Hose Retainer 49 (000000--008 ) Tie, Cable.00D Max.4Lg 4 94 (000000--008 ) Clamp, Cable,.00D 0.W Stl 08 (000000--008 ) Washer, Flat, 0.8b 0.88d.08, Ss 8 7 (000000--008 ) Scr Hexssm 8X. 7 087 (000000--008 ) Nut--Hxlocnyln M 8X. Reg Ss 8 04 (000000--0999 ) Stud, M8X. 0 8.8 Pltd 4 9 470 (000000--0999 ) Knob, M8X. Insert 4 0 8 (0048--008 ) Switch, Float 70 (009--008 ) Filter, Vac Fan 00 (000000--008 ) Washer, Flat,. Fender 4 08 (0000--008 ) Washer, Flat, 0.8b 0.88d.08, Ss 4 4 (0000--008 ) Sleeve, P/M, 0.49d 0.8b 0.l 40ss 4 7 (0000--008 ) Screw, Hex, M 8 X. X 0, Ss, Nl 4 700 MM400 (9-0) -9
STANDARD PARTS Fig. 9 - Recovery Tank Group (009 - ) 8 7 7 4 0 0 9 0 9 8 7 4 4 8 9 0 4-40 700 MM400 ( -0)
STANDARD PARTS Fig. 9 - Recovery Tank Group (009 - ) 00 - NA, CE o 98440 (009-- ) Tank, Recovery 7749 (009-- ) Fitting, Plstc, Pf/Pf, Bh (009-- ) Hose, Inlet Recovery Tank o 4 08 (009-- ) Hose, Assembly, Drain,.7 o 0089 (009-- ) Cap, Drain Assembly 09 (009-- ) Strap, Drain Cap 7 0087 (009-- ) O Ring,.48 Id,.7 Od 8 94 (009-- ) Hose, Drain, Flex 9 (009-- ) Tube, Drain 0 09740 (009-- ) Scr--Hexssm 8X. 0 7 (009-- ) Screw, Hex, M 8 X. X 0, Ss, Nl 4 99 (009-- ) Clamp--Wormdrive, 0.8--.0D (009-- ) Sleeve, P/M, 0.49d 0.8b 0.l 40ss 4 4 08 (009-- ) Washer, Flat, 0.8b 0.88d.08, Ss 4 79 (009-- ) Clip, Hose, Hanger 97 (009-- ) Clamp--Wormdrive,.--.0d,.0w 7 00 (009-- ) Washer, Flat,. Fender 4 8 70 (009-- ) Filter, Vac Fan 9 7400 (009-- ) Hose & Cuff Assy, Vacuum.D L 0 8 (009-- ) Switch, Float 797-- (009-- ) Ftg,Plstc,Cplg,Barb.7Pt--.0Hs 7 (009-- ) Cable Assy, Hose Retainer 49 (009-- ) Tie, Cable.00D Max.4Lg 4 94 (009-- ) Clamp, Cable,.00D 0.W Stl 08 (009-- ) Washer, Flat, 0.8b 0.88d.08, Ss 4 7 (009-- ) Scr Hexssm 8X. 7 087 (009-- ) Nut--Hxlocnyln M 8X. Reg Ss 8 (009-- ) Clamp, Hose, Wormdrive,.0--.00d o 9 07 (009-- ) Hose, Assembly, Drain,.7 o 0 0089 (009-- ) Cap, Drain Assembly 09 (009-- ) Strap, Drain Cap 0087 (009-- ) O Ring,.48 Id,.7 Od 7 (009-- ) Ftg--Plug Npt Pm Rd Hd Plstc. 700 MM400 (9-0) -4
STANDARD PARTS Fig. 0 - Solution Tank Group 4 9 9 0 7 4 4 8 8 8 8 7 7 0 0 8 7-4 700 MM400 ( -0)
STANDARD PARTS Fig. 0 - Solution Tank Group 00-700, XP, NA 9770 (000000-- ) Bracket, Prop Arm (000000-- ) Sleeve,.8B.49D. Ss 00 (000000-- ) Washer--Flt. Fender Pltd 4 7 (000000-- ) Tank, Solution, w/label 7 (000000-- ) Ftg--Plug Npt Pm Rd Hd Plstc. 7 (000000-- ) Cover, Solution Tank, w/label 7 0 (000000-- ) Gasket, Tank, Front 8 (000000-- ) Gasket, Tank, Rear 9 40 (000000-- ) Stop, Tank 0 40 (000000-- ) Sleeve 4 (000000-- ) Spring, Torsion 9 (000000-- ) Hinge Leaf 7 (000000--0987 ) Hinge Wldt, Leaf 4 4 (000000-- ) Scr--Flt M 8X. 0 Blk Nyloc 90 (000000--0084 ) Plug, Solution Tank 89 (000000--0987 ) Hinge Leaf, Wldt, Rear 7 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 8 09740 (000000-- ) Scr--Hexssm 8X. 0 4 9 (000000-- ) Scr--Hexssm 8X. Nylnloc 0 9848 (09874-- ) Hinge Wldt, Leaf 700 MM400 ( -0) -4
STANDARD PARTS Fig. - Vacuum Fan Group 4 0 7 8 9 7-44 700 MM400 ( -0)
STANDARD PARTS Fig. - Vacuum Fan Group 004-700, XP, NA o 7 (000000--004 ) Fan, Vac (See Breakdowns) 4 (000000--004 ) Seal, Vac Fan (000000-- ) Bracket, Mounting, Vac Fan 4 704 (000000--009 ) Filter, Vac Fan 700, Field Kit 4078 (000000-- ) Clamp--Cable, 0.44D 0.W 49 (000000-- ) Tie, Cable.7D Max 7.0Lg 7 09740 (000000-- ) Scr--Hexssm 8X. 0 8 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 4 9 7 (000000-- ) Scr Hexssm 8X. o 0 980 (0044-- ) Fan Assy, Vacuum (See Breakdowns) 4 (0044-- ) Seal, Vac Fan 700 MM400 ( -0) -4
STANDARD PARTS Fig. - Solution Control Group 8 7 4 7 0 4 9 0 4 4 8 8 0 9 8 9-4 700 MM400 (9-0)
STANDARD PARTS Fig. - Solution Control Group 00-700, EE, XP, NA, JP 8 (000000-- ) Lever, Control 90 (000000-- ) Grip, Handle 8 (000000-- ) Housing, Control Lever 4 44 (000000-- ) Swivel 444 (000000-- ) Washer,.44B.9D.0Nylon 4 (000000-- ) Scr--Flt M 8X. 0 Blk Nyloc 7 4 (000000-- ) Washer, Finish M8 Blk 8 88 (000000-- ) Cable Assy, Water 9 74 (000000--0908 ) Kit, Ci, Sol Valve [700] 0 97787 (0908-- ) Bracket, Mtg, Valve 747 (0908-- ) Valve, Solenoid 80 (000000-- ) Clamp, Hose, Wormdrive, 0.--.0d,.w 4 (000000-- ) Clamp--Wormdrive, 0.-- 0.88D 4 097 (000000-- ) Lever, Valve 97777 (000000-- ) Hose, Rbr, E90,.Id 0.8Id 8 (000000--0049 ) Replm Kit, Screen 7 090 (000000-- ) Scr Hexssm 8X. 0 8 087 (000000-- ) Nut--Hxlocnyln M 8X. Reg Ss 4 9 09740 (000000-- ) Scr--Hexssm 8X. 0 0 08 (000000-- ) Washer, Flat, 0.8b 0.88d.08, Ss 74 (0049-- ) Screen, Drain 78 (0049-- ) Ftg Str Plastic 747 (0908-- ) Hose, Pvc 4 7 (0908-- ) Screw, Hex, M08 X. X, Ss (0908-- ) Screw, Pan, #08 -- X 0.8 090 (000000--0908 ) Hose, Rbr, Pinch Valve 700 MM400 (9-0) -47
STANDARD PARTS Fig. - Battery Group 8 8 9 7 4 7 0 4 0 0 0 0-48 700 MM400 (9-0)
STANDARD PARTS Fig. - Battery Group 008 - EE, NA 8 (000000--0999 ) Cable, Battery 7 (000000-- ) Cable Assy--Lead,.0, Ga 4 0 (000000--09704 ) Cable, Battery 4 49 (000000-- ) Cover, Terminal,Poly 007 (000000-- ) Boot, 90Deg.0D.7X.84 o 7 (000000-- ) Harness, Cable, Battery 7 488 (000000-- ) Connector, Grey, SB0 o 778 (000000-- ) Battery Kit V Ah Wet 8 47 (000000-- ) Spacer, Battery.X.X.0 9 474 (000000-- ) Spacer, Battery.0X4.X.0 0 80 (000000-- ) Battery, V, Res Cap: 9 Wet 8 (000000-- ) Strap, Poly, Webbing, 00 L 7 (0970-- ) Cable Assy--Lead,.0, Ga 97907 (0000-- ) Wire Assy, Cable, 4ga, Red 4 97908 (0000-- ) Wire Assy, Cable, 4ga, Red 09 (000000-- ) Screw, Pan, M X 0. X 0, 4.8 077 (000000-- ) Washer, Lock, Int, M Ss 7 874 (000000-- ) Nut, Hex, Flexlock,.--8 700 MM400 (9-0) -49
STANDARD PARTS Fig. 4 - Steering Control Group 4 0 9 8 7-0 700 MM400 ( -0)
STANDARD PARTS Fig. 4 - Steering Control Group 000-700, EE, NA, CE 740 (000000-- ) Handle, Speed Control 48 (000000-- ) Grip, Handle, Round 079 (000000-- ) Gear, Speed Control 4 0 (000000-- ) Washer, Spacer, Speed Control 494 (000000-- ) Bearing, Snap.87 Bore 08 (000000-- ) Spring, Torsion Centering 7 87 (000000-- ) Potentiometer Assy, Electronic 8 07 (000000-- ) Nut--Hx Thin.8-- 9 7974 (000000-- ) Gear, 8 T. 4P 0 08 (000000-- ) Plate, Shield 4 (000000-- ) Scr--Flt Mx0. SS8--8 700 MM400 ( -0) -
STANDARD PARTS Fig. - Operator Console Group (000000-0794) 8 7 4 7 4 9 0 4 8 7 8 7 0 9 8 9 0 0 8 9-700 MM400 (9-0)
STANDARD PARTS Fig. - Operator Console Group (000000-0794) 004-700, EE, NA 74 (000000--0794 ) Housing, Steering, Adj, Std, w/label (000000--0794 ) Latch 478 (00--0794 ) Rivet, Pop,.D X. X.Dhd 4 4 7888 (000000--0794 ) Plugbtn.H. Max Blacknyl 80 (000000--0794 ) Replm Kit, Rear Panel o 4 (000000--0794 ) Gauge, Hourmeter, Electronic 7 8 (000000--0794 ) Gasket, Hourmeter 8 4 (000000--0794 ) Plug, Switch o 9 8 (000000--0794 ) Switch Assy, Key Spst 0 84 (000000--0794 ) Key Set 74 (000000--0794 ) Light Assy, Indicator, Green, Vdc (000000--0794 ) Meter, Volt, Battery Condition (000000--0794 ) Meter, Brush Down Pressure 4 (000000--0794 ) Switch, Scrub 74 (000000--0794 ) Light Assy, Indicator, Red, Vdc 74 (000000--0794 ) Breaker--Circuit 0 Resetable 7 79 (000000--007 ) Strip, Stop, Adj. Shroud 8 9 (000000--0794 ) Breaker, Circuit 0 Amp 9 97 (000000--0794 ) Breaker, Circuit, Amp 0 77 (000000--0794 ) Boot--Circuit Breaker 878 (000000--0794 ) Breaker--Circuit. Resetable 09 (000000--0794 ) Diode, Bridge Amp 9 (000000--0794 ) Seal, Rbr,. X.8 X.0 4 0999 (000000--0794 ) Plug, Hole, Hourmeter, Blk 74 (000000--0794 ) Light Assy, Indicator, Blue, Vdc 00 (000000--0794 ) Washer--Flt. Fender Pltd 7 0900 (000000--0794 ) Scr Hexssm 8X. 8 747 (008--0794 ) Bracket, Locking, Shroud 9 879 (00--0794 ) Bracket, Steering Adjustment 0 9 (00--0794 ) Nut, Hex, Std, M8 X. 44 (00--0794 ) Washer, Lock, Int--ext, 0. 700 MM400 (9-0) -