UL 489 Series UL 489 Series Description The Series miniature circuit breaker offers a compact solution for protection requirements. The U AND UP devices are UL 489 tested limiting and DIN rail mounted. The U and UP is available with application-specific trip characteristics to provide maximum circuit protection. The breakers offer thermal-magnetic trip protection according to K and Z characteristics. For the worldwide market, the breakers carry UL, CSA, IEC, CE and many other agency approvals and certifications. Features UL limiting Fast breaking time (.3.5 ms) Bus connection system Wide range of accessories Available with variable depth handle mechanism CE certified and marked DIN rail mounting Finger safe terminals Multi-function terminals Suitable for reverse feed but UDC has polarity UL 489 Listed - branch circuit protective device. UL File #E33 U UP SU00PR UDC Amperage 0. 63 0. 5 0. 35A ; 40 63A 63 Voltage 40 VAC 480Y/77VAC 480Y/77 VAC ; 40 VAC 60-5 VDC Poles,, 3, 4,, 3, 4,, 3, 4, Trip characteristics K, Z K, Z K K, Z Interrupting ratings Up to 5 ka : IEC 60947-0 ka : UL 489 0 ka : CSA. No. 5 Up to 5 ka : IEC 60947-0 ka : UL 489 0 ka : CSA. No. 5 0kA: UL489 0kA: CSA. No.5 Auxiliary contacts Yes Yes Yes Yes Bell alarm Yes Yes Yes Yes Shunt trip Yes Yes Yes Yes Bus bar Yes Yes No Yes 4 ka : UL489 4 ka: CSA. No. 5 5
U-K, 40 VAC Branch circuit protection 5 K S0U-K S0U-K 0. S0U-K0. 0. S03U-K0. 0.3 S0U-K0.3 0.3 S03U-K0.3 0.5 S0U-K0.5 0.5 S03U-K0.5 0.75 S0U-K0.75 0.75 S03U-K0.75 S0U-K S03U-K.6 S0U-K.6.6 S03U-K.6 S0U-K S03U-K 3 S0U-K3 3 S03U-K3 4 S0U-K4 4 S03U-K4 5 S0U-K5 5 S03U-K5 6 S0U-K6 6 S03U-K6 8 S0U-K8 3 8 S03U-K8 0 S0U-K0 0 S03U-K0 5 S0U-K5 5 S03U-K5 6 S0U-K6 6 S03U-K6 0 S0U-K0 0 S03U-K0 5 S0U-K5 5 S03U-K5 30 S0U-K30 30 S03U-K30 3 S0U-K3 3 S03U-K3 40 S0U-K40 40 S03U-K40 50 S0U-K50 50 S03U-K50 60 S0U-K60 60 S03U-K60 63 S0U-K63 63 S03U-K63 0. S0U-K0. 0. S04U-K0. 0.3 S0U-K0.3 0.3 S04U-K0.3 0.5 S0U-K0.5 0.5 S04U-K0.5 0.75 S0U-K0.75 0.75 S04U-K0.75 S0U-K S04U-K.6 S0U-K.6.6 S04U-K.6 S0U-K S04U-K 3 S0U-K3 3 S04U-K3 4 S0U-K4 4 S04U-K4 5 S0U-K5 5 S04U-K5 6 S0U-K6 6 S04U-K6 8 S0U-K8 8 S04U-K8 4 0 S0U-K0 0 S04U-K0 5 S0U-K5 5 S04U-K5 6 S0U-K6 6 S04U-K6 0 S0U-K0 0 S04U-K0 5 S0U-K5 5 S04U-K5 30 S0U-K30 30 S04U-K30 3 S0U-K3 3 S04U-K3 40 S0U-K40 40 S04U-K40 50 S0U-K50 50 S04U-K50 60 S0U-K60 60 S04U-K60 63 S0U-K63 63 S04U-K63 Tripping characteristic K UL 489 40 VAC 0 ka S03U-K Inductive loads K Curve Designed for allowing higher in-rush s during system start up Example: motors, transformers Accessories & technical data Accessories See page 5.9-5.3 Technical data See page 5.4-5.6 S04U-K Note: This breaker for AC use only
U-Z, 40 VAC Branch circuit protection Z S0U-Z S0U-Z 0.5 S0U-Z0.5 0.5 S03U-Z0.5 S0U-Z S03U-Z.6 S0U-Z.6.6 S03U-Z.6 S0U-Z S03U-Z 3 S0U-Z3 3 S03U-Z3 4 S0U-Z4 4 S03U-Z4 5 S0U-Z5 5 S03U-Z5 6 S0U-Z6 6 S03U-Z6 8 S0U-Z8 8 S03U-Z8 0 S0U-Z0 0 S03U-Z0 5 S0U-Z5 3 5 S03U-Z5 6 S0U-Z6 6 S03U-Z6 0 S0U-Z0 0 S03U-Z0 5 S0U-Z5 5 S03U-Z5 30 S0U-Z30 30 S03U-Z30 3 S0U-Z3 3 S03U-Z3 40 S0U-Z40 40 S03U-Z40 50 S0U-Z50 50 S03U-Z50 60 S0U-Z60 60 S03U-Z60 63 S0U-Z63 63 S03U-Z63 0.5 S0U-Z0.5 0.5 S04U-Z0.5 S0U-Z S04U-Z.6 S0U-Z.6.6 S04U-Z.6 S0U-Z S04U-Z 3 S0U-Z3 3 S04U-Z3 4 S0U-Z4 4 S04U-Z4 5 S0U-Z5 5 S04U-Z5 6 S0U-Z6 6 S04U-Z6 8 S0U-Z8 8 S04U-Z8 0 S0U-Z0 0 S04U-Z0 5 S0U-Z5 4 5 S04U-Z5 6 S0U-Z6 6 S04U-Z6 0 S0U-Z0 0 S04U-Z0 5 S0U-Z5 5 S04U-Z5 30 S0U-Z30 30 S04U-Z30 3 S0U-Z3 3 S04U-Z3 40 S0U-Z40 40 S04U-Z40 50 S0U-Z50 50 S04U-Z50 60 S0U-Z60 60 S04U-Z60 63 S0U-Z63 63 S04U-Z63 S03U-Z Tripping characteristic Z UL 489 40 VAC 0 ka Resistive loads Z Curve Designed to provide maximum protection with a very low short circuit trip setting Example: semiconductors, control circuits Accessories & technical data Accessories See page 5.9-5.3 Technical data See page 5.4-5.6 5 S04U-Z Note: This breaker for AC use only
UP-K, 480Y/77 VAC Branch circuit protection K S0UP-K 0. S0UP-K0. 0. S03UP-K0. 0.3 S0UP-K0.3 0.3 S03UP-K0.3 0.5 S0UP-K0.5 0.5 S03UP-K0.5 0.75 S0UP-K0.75 0.75 S03UP-K0.75 S0UP-K S03UP-K.6 S0UP-K.6.6 S03UP-K.6 S0UP-K S03UP-K 3 S0UP-K3 3 S03UP-K3 4 S0UP-K4 3 4 S03UP-K4 5 S0UP-K5 5 S03UP-K5 6 S0UP-K6 6 S03UP-K6 8 S0UP-K8 8 S03UP-K8 0 S0UP-K0 0 S03UP-K0 5 S0UP-K5 5 S03UP-K5 6 S0UP-K6 6 S03UP-K6 0 S0UP-K0 0 S03UP-K0 5 S0UP-K5 5 S03UP-K5 0. S0UP-K0. 0. S04UP-K0. 0.3 S0UP-K0.3 0.3 S04UP-K0.3 0.5 S0UP-K0.5 0.5 S04UP-K0.5 0.75 S0UP-K0.75 0.75 S04UP-K0.75 S0UP-K S04UP-K.6 S0UP-K.6.6 S04UP-K.6 S0UP-K S04UP-K 3 S0UP-K3 3 S04UP-K3 4 S0UP-K4 4 4 S04UP-K4 5 S0UP-K5 5 S04UP-K5 6 S0UP-K6 6 S04UP-K6 8 S0UP-K8 8 S04UP-K8 0 S0UP-K0 0 S04UP-K0 5 S0UP-K5 5 S04UP-K5 6 S0UP-K6 6 S04UP-K6 0 S0UP-K0 0 S04UP-K0 5 S0UP-K5 5 S04UP-K5 S0UP-K Tripping characteristic K UL 489 480Y/77 VAC 0 ka 5 Inductive loads K Curve Designed for allowing higher in-rush s during system start up Example: motors, transformers Accessories & technical data Accessories See page 5.9-5.3 Technical data See page 5.4-5.6 S03UP-K S04UP-K Note: This breaker for AC use only
UP-Z, 480Y/77 VAC Branch circuit protection Z S0UP-Z 0.5 S0UP-Z0.5 0.5 S03UP-Z0.5 S0UP-Z S03UP-Z.6 S0UP-Z.6.6 S03UP-Z.6 S0UP-Z S03UP-Z 3 S0UP-Z3 3 S03UP-Z3 4 S0UP-Z4 4 S03UP-Z4 5 S0UP-Z5 5 S03UP-Z5 6 S0UP-Z6 3 6 S03UP-Z6 8 S0UP-Z8 8 S03UP-Z8 0 S0UP-Z0 0 S03UP-Z0 5 S0UP-Z5 5 S03UP-Z5 6 S0UP-Z6 6 S03UP-Z6 0 S0UP-Z0 0 S03UP-Z0 5 S0UP-Z5 5 S03UP-Z5 0.5 S0UP-Z0.5 0.5 S04UP-Z0.5 S0UP-Z S04UP-Z.6 S0UP-Z.6.6 S04UP-Z.6 S0UP-Z S04UP-Z 3 S0UP-Z3 3 S04UP-Z3 4 S0UP-Z4 4 S04UP-Z4 5 S0UP-Z5 5 S04UP-Z5 6 S0UP-Z6 4 6 S04UP-Z6 8 S0UP-Z8 8 S04UP-Z8 0 S0UP-Z0 0 S04UP-Z0 5 S0UP-Z5 5 S04UP-Z5 6 S0UP-Z6 6 S04UP-Z6 0 S0UP-Z0 0 S04UP-Z0 5 S0UP-Z5 5 S04UP-Z5 S0UP-Z Tripping characteristic Z UL 489 480Y/77 VAC 0 ka Resistive loads Z Curve Designed to provide maximum protection with a very low short circuit trip setting Example: semiconductors, control circuits Accessories & technical data Accessories See page 5.9-5.3 Technical data See page 5.4-5.6 5 S03UP-Z S04UP-Z Note: This breaker for AC use only
5 K SU0PR-K0. SU0PR-K0. SU00PR-K, 480Y/77 VAC, Ring tongue Branch circuit protection UL489, CSA. No.5 0. SU0PR-K0. 3 0. SU03PR-K0. 0.3 SU0PR-K0.3 0.3 SU03PR-K0.3 0.5 SU0PR-K0.5 0.5 SU03PR-K0.5 0.75 SU0PR-K0.75 0.75 SU03PR-K0.75 SU0PR-K SU03PR-K.6 SU0PR-K.6.6 SU03PR-K.6 SU0PR-K SU03PR-K 3 SU0PR-K3 3 SU03PR-K3 4 SU0PR-K4 4 SU03PR-K4 5 SU0PR-K5 5 SU03PR-K5 6 SU0PR-K6 6 SU03PR-K6 8 SU0PR-K8 8 SU03PR-K8 0 SU0PR-K0 0 SU03PR-K0 3 SU0PR-K3 3 SU03PR-K3 5 SU0PR-K5 5 SU03PR-K5 6 SU0PR-K6 6 SU03PR-K6 0 SU0PR-K0 0 SU03PR-K0 5 SU0PR-K5 5 SU03PR-K5 30 SU0PR-K30 30 SU03PR-K30 3 SU0PR-K3 3 SU03PR-K3 35 SU0PR-K35 35 SU03PR-K35 40 SU0PR-K40 40 SU03PR-K40 50 SU0PR-K50 50 SU03PR-K50 60 SU0PR-K60 60 SU03PR-K60 63 SU0PR-K63 63 SU03PR-K63 0. SU0PR-K0. 0. SU04PR-K0. 0.3 SU0PR-K0.3 0.3 SU04PR-K0.3 0.5 SU0PR-K0.5 0.5 SU04PR-K0.5 0.75 SU0PR-K0.75 0.75 SU04PR-K0.75 SU0PR-K SU04PR-K.6 SU0PR-K.6.6 SU04PR-K.6 SU0PR-K SU04PR-K 3 SU0PR-K3 3 SU04PR-K3 4 SU0PR-K4 4 SU04PR-K4 5 SU0PR-K5 5 SU04PR-K5 6 SU0PR-K6 6 SU04PR-K6 8 SU0PR-K8 8 SU04PR-K8 0 SU0PR-K0 4 0 SU04PR-K0 3 SU0PR-K3 3 SU04PR-K3 5 SU0PR-K5 5 SU04PR-K5 6 SU0PR-K6 6 SU04PR-K6 0 SU0PR-K0 0 SU04PR-K0 5 SU0PR-K5 5 SU04PR-K5 30 SU0PR-K30 30 SU04PR-K30 3 SU0PR-K3 3 SU04PR-K3 35 SU0PR-K35 35 SU04PR-K35 40 SU0PR-K40 40 SU04PR-K40 50 SU0PR-K50 50 SU04PR-K50 60 SU0PR-K60 60 SU04PR-K60 63 SU0PR-K63 63 SU04PR-K63 SU03PR-K0. SU04PR-K0. Tripping characteristic K UL 489 480Y/77 VAC 0 ka Inductive loads K Curve Designed for allowing higher in-rush s during system start up Example: motors, transformers Accessories & technical data Accessories See page 5.9-5.3 Technical data See page 5.4-5.6
UDC-K, pole 60 VDC, pole 5 VDC Branch circuit protection K S0UDC-K S0UDC-K S0UDC-K S0UDC-K.6 S0UDC-K.6.6 S0UDC-K.6 S0UDC-K S0UDC-K 3 S0UDC-K3 3 S0UDC-K3 4 S0UDC-K4 4 S0UDC-K4 5 S0UDC-K5 5 S0UDC-K5 6 S0UDC-K6 6 S0UDC-K6 8 S0UDC-K8 8 S0UDC-K8 0 S0UDC-K0 0 S0UDC-K0 3 S0UDC-K3 3 S0UDC-K3 5 S0UDC-K5 5 S0UDC-K5 6 S0UDC-K6 6 S0UDC-K6 0 S0UDC-K0 0 S0UDC-K0 5 S0UDC-K5 5 S0UDC-K5 30 S0UDC-K30 30 S0UDC-K30 3 S0UDC-K3 3 S0UDC-K3 40 S0UDC-K40 40 S0UDC-K40 50 S0UDC-K50 50 S0UDC-K50 60 S0UDC-K60 60 S0UDC-K60 63 S0UDC-K63 63 S0UDC-K63 NOTE: Standard UL 489 (only DC; please note polarity of device). Tripping characteristic K UL 489 480Y/77 VAC 4 ka Inductive loads K Curve Designed for allowing higher in-rush s during system start up Example: motors, transformers Accessories & technical data Accessories See page 5.9-5.3 Technical data See page 5.4-5.6 Tripping time Minutes Seconds 0 60 40 0 0 6 4 40 0 0 6 4 I I K I =.0 x In I =.35 x In ϑ R = 5 C = marginal characteristic measured in cold status 0.6 0.4 0. 0. 0.06 0.04 DC 5 0.0 0.0.5 3 4 5 6 8 0 5 0 30 4 Multiple of rated 5
Z S0UDC-K S0UDC-K UDC-Z, pole 60 VDC, pole 5 VDC Branch circuit protection S0UDC-Z S0UDC-Z.6 S0UDC-Z.6.6 S0UDC-Z.6 S0UDC-Z S0UDC-Z 3 S0UDC-Z3 3 S0UDC-Z3 4 S0UDC-Z4 4 S0UDC-Z4 5 S0UDC-Z5 5 S0UDC-Z5 6 S0UDC-Z6 6 S0UDC-Z6 8 S0UDC-Z8 8 S0UDC-Z8 0 S0UDC-Z0 0 S0UDC-Z0 3 S0UDC-Z3 3 S0UDC-Z3 5 S0UDC-Z5 5 S0UDC-Z5 6 S0UDC-Z6 6 S0UDC-Z6 0 S0UDC-Z0 0 S0UDC-Z0 5 S0UDC-Z5 5 S0UDC-Z5 30 S0UDC-Z30 30 S0UDC-Z30 3 S0UDC-Z3 3 S0UDC-Z3 40 S0UDC-Z40 40 S0UDC-Z40 50 S0UDC-Z50 50 S0UDC-Z50 60 S0UDC-Z60 60 S0UDC-Z60 63 S0UDC-Z63 63 S0UDC-Z63 NOTE: Standard UL 489 (only DC; please note polarity of device). Tripping characteristic Z UL 489 480Y/77 VAC 4 ka marginal characteristic measured in cold status Resistive loads Z Curve Designed to provide maximum protection with a very low short circuit trip setting Example: semiconductors, control circuits Accessories & technical data Accessories See page 5.9-5.3 Technical data See page 5.4-5.6 Tripping time Minutes Seconds 5 Multiple of rated
Accessories U, UP, SU00PR & UDC Auxiliary contacts The auxiliary contacts will signal whether the breaker is in the ON or OFF position. Description For field mounting: right side SC-H6RU Bell alarm The bell alarm includes a set of contacts that will only signal when the breaker has tripped. Typically the contacts would be connected to an alarm or bell to signal the operator that an over trip has occurred. The bell alarm also includes a test button for testing the alarm contacts without opening the breaker. SC-H6RU Description For field mounting: right side SC-S6RU Rotary operating mechanism Allows through the door operation. Description Handle mechanism SC-DH Shunt trip For remote tripping of breaker, a shunt trip device can be added to the MCB. The solenoid device opens the breaker after control voltage is applied. SC-S6RU Description For field mounting: right side SC-AU 60 VAC/DC For field mounting: right side 0 45 VAC SC-AU 0 50 VDC NOTE: For shafts and handles, refer to parts in the MCCB section. Possible mounting arrangements of MCB accessories 5 SC-DH +ST+H+H+H) Legend Auxiliary contact Bell alarm/auxiliary contact H S/H +ST+S/H+S/H (H)+S/H (H) Bell alarm/auxiliary contact used as auxiliary contact S/H (H) NOTE: Right hand mount accessories cannot be used in conjunction with SC-DH, Rotary operating mechanism. Shunt trip ST SC-AU
Accessories U, UP, UDC & SU00PR Connection drawings Bell alarm SC-S6RU In ON and OFF position after hand operation Auxiliary contact SC-H6RU Auxiliary contact in ON position Shunt trip SC-A...U Shunt trip in OFF position SC-AU SC-AU In OFF position after tripping Auxiliary contact in OFF position Mounting Addition of a SC-H6RU auxiliary contact 5 Addition of a SC-S6RU bell alarm contact Addition of a SC-A..U shunt trip U-UP SC-A...U
Accessories SU00PR SU00PR Accessory overview H S ST Auxiliary contact SC-H6RU Signal contact SC-S6RU Shunt trip SC-A...U SU00PR Instructions for use 5
Accessories U, UP & UDC UL approved busbars UL file # E5045 UL 489 busbar cannot be cut. For use on: U UP S0UDC Amp rating 80 Number of 6 8 Phases Busbar length (mm) 03. 08.8 34.4 Catalog number PS /6/6BP PS //6BP PS /8/6BP Phase PS/6/6 BP U UP S0UDC 80 6 8 03. 08.8 34.4 PS /6/6BP PS //6BP PS /8/6BP U UP S0UDC 80 6 8 3 3 3 03. 08.8 34.4 PS 3/6/6BP PS 3//6BP PS 3/8/6BP Phase Busbar tooth covers for BS...BP (UL 489) Description Covers three unused of busbar BSK-BP 3 Phase BSK-BP Feeder terminals for PS...BP (UL 489) Description Terminal, insulated with pin contact Feeder Terminal, single-pole terminal, can be mounted side by side, feed on the pin of the busbar AST35/5BP SZ-ESK BP AST35/5BP SZ-ESPBP 5
Technical data U, UP, SU00PR & UDC Technical data U UP SU00PR UDC Specifications: UL 489, C. No. 5, IEC 60947- UL 489, VDE 0660 UL File-Number: E 33, UL, Current limiting series ratings E33, UL :,, 3 & 4, Tripping characteristics: K, Z K K, Z : 0. (K) 0.5 (Z)... 63 A 0. (K) 0.5 (Z)... 5 A 0.... 63A - 63 A voltage: Single pole: 40VAC Multi pole: 40VAC Single pole: 77VAC Multi pole: 480Y/77VAC Single pole: 77VAC (<=35A); 40VAC (>35A) Multi pole: 480Y/77VAC (<=35A); 40VAC (>35A) P: 60 V DC P:5 V DC Short circuit capacity: 0 ka 4 ka Frequency: 50/60 Hz 50/60 Hz Degree of protection: IP 0 IP0, IP40 in enclosure w/cover IP 0 Mounting position: Vertical and horizontal Any Vertical and horizontal Fixing: 35 mm DIN rail 35 mm DIN rail Clamps only for Cu: 8-4 AWG (0.75 5 mm ) 8-4 AWG (0.75 5 mm ) Service life, mech. and at rated 6000 operations (AC) 0,000 operations load: cycle (s-on, 9S-OFF) 0,000 operations Tightening torque: 5 in. lbs (.8 Nm) 5 in. lbs (.8 Nm) Ambient temperature: 5 C + 55 C/ 3 F + 3 F 5 C + 55 C/ 3 F + 3 F Shock resistance: 30 g at least impacts shock, duration 3 ms 5 g, shocks - 3ms 30 g at least impacts shock, duration 3 ms Auxiliary contact SC-H6RU and SC-S6RU : 0 voltage AC / DC: 4 Contact: pole double throw Connection capacity mm 8 4 AWG (0.75.5 mm) Tightening torque: in.ibs (. Nm) Shock resistance acc. to DIN IEC 68--6: 5 g, 0 frequency cycles 5...50...5 Hz at 4 VAC/DC, 5 ma auto-reclosing < 0 ms Mechanical service life: 0,000 operations Shunt trip Type SC-AU SC-AU 5 voltage AC DC V V... 60... 60 0... 45 0... 50 Max. release duration ms < 0 < 0 Min. release voltage AC DC V V 7 0 55 80 Consumption on release AC DC VA VA 40... 00 40... 00 55... 0 55... 0 Coil resistance Ω 3.7 5 Terminals AWG/mm 8 6 / 0.75 6 8 6 / 0.75 6 Tightening torque in.ibs/nm 8 / 8 / Poles connected in series.
Technical data U, UP, SU00PR & UDC Internal resistance and power loss Internal resistance per pole in mz, power loss per pole in W. Type Device series K Device series Z Type Device series K Device series Z A mz W mz W A mz W mz W U UP 0. 4500.7 0.3 0000.8 0.5 6340.6 000.5 0.75 500.4 400.4 70.3.6 65.6 00.8 460.8 69.5 3.9.9 4 63.6 63.6 6 67.4 04 3.7 8 45.9 55 3.5 0 9.9. 3 6 8.. 0.9.8 0 7.3.9 7.3.9 5 5.6 3.5 5.6 3.5 3 4. 4. 4. 4. 40 4.0 6.4 4.0 6.4 UDC 400.4 70.3.6 65.6 00.8 460.8 69.5 3.9.9 4 53.6 63.5 6 67.4 04 3,7 8 45.9 55 3.5 0 9.9. 3 6 8.. 0.9.8 0 7.3.0 7.3.9 5 5.6 3.5 5.6 3.5 3 4. 4. 4. 4. 40 4.0 6.4 4.0 6.4 50. 3.0.8 4.4 63.3 5..3 5. 50. 3.0.8 4.4 63.3 5..3 5. SU00PR 5 Internal resistance per pole ) Power loss per pole ) A mω W 0. 5300.0 0.3 3700.3 0.5 4740.9 0.75 067.6 70.7.5 60.56 44.77 3 40.6 4 09.75 5 50.6 6 54.94 8.4 0 8..8 3 4.8.50 5 8..83 6..83 0 8.5 3.40 5 5.5 3.43 30 3.8 3.39 3 4.6 4.70 35 3.9 4.76 40.8 4.40 50.7 4.5 60.7 6.8 63.9 7.56 4) Internal resistances and power loss are subject to application-specific and environmentspecific conditions and are therefore to be considered as typical values.
Technical data U, UP, SU00PR & UDC Tripping characteristic K (68 F) Breaker calibration temperature 68 F See chart below for temperature DeRating Tripping characteristic Z (68 F) Breaker calibration temperature 68 F See chart below for temperature DeRating Temperature derating Max. operating values depending on the ambient temperature for a circuit-breaker of characteristics type K and Z K and Z Ambient temperature T ( C/ F) I n (A) 40/ 40 30/ 0/ 4 0/4 0/3 0/50 0/68 30/86 40/04 50/ 60/40 70/58 0.5 0.66 0.64 0.6 0.59 0.56 0.53 0.50 0.47 0.43 0.40 0.35 0.3.0.3.7..7..06.00 0.94 0.87 0.79 0.7 0.6.6..04.96.88.79.70.60.50.39.6.3 0.98.0.65.55.45.35.4..00.87.73.58.4. 3.0 4.0 3.8 3.7 3.5 3.4 3. 3.0.8.6.4..8 4.0 5.3 5. 4.9 4.7 4.5 4. 4.0 3.7 3.5 3..8.4 6.0 7.9 7.6 7.3 7.0 6.7 6.4 6.0 5.6 5. 4.7 4. 3.7 8.0 0.8 0. 9.8 9.4 8.9 8.5 8.0 7.5 6.9 6.3 5.7 4.9 0.0 3..7..7. 0.6 0.0 9.4 8.7 7.9 7. 6. 3.0 7. 6.6 5.9 5. 4.5 3.8 3.0..3 0.3 9. 8.0 6.0. 0.4 9.6 8.8 7.9 7.0 6.0 5.0 3.9.6.3 9.8 0.0 6.5 5.5 4.5 3.5.4. 0.0 8.7 7.3 5.8 4.. 5.0 33. 3.9 30.6 9.3 8.0 6.5 5.0 3.4.7 9.8 7.7 5.3 3.0 4.3 40.8 39. 37.5 35.8 33.9 3.0 9.9 7.7 5.3.6 9.6 40.0 5.9 5.0 49.0 46.9 44.7 4.4 40.0 37.4 34.6 3.6 8.3 4.5 50.0 66. 63.7 6. 58.6 55.9 53.0 50.0 46.8 43.3 39.5 35.4 30.6 63.0 83.3 80.3 77. 73.9 70.4 66.8 63.0 58.9 54.6 49.8 44.5 38.6 5
Approximate dimensions U, UP, UDC & SU00PR Approximate dimensions in mm UDC U UP SU00PR SC-H6RU, SC-S6RU SC-A..U 5