FULL-LINE PRODUCT BROCHURE

FULL-LINE PRODUCT BROCHURE

HYDRAULIC IMPACT HAMMERS Rammer hydraulic impact hammers (Compact ) Carrier 108 200 400-1,900 3-8 154 4.09 1,800-4,000 211 250 400-1,900 4-11 220 4.69 2,600-5,700 315 350 400-1,900 4-13 298 5.16 3,500-7,900 522 500 400-1,900 5-18 452 5.91 5,500-12,100 Unbreakable trapezoidal tool extends service-life No tie-rods, no tie-bolts and no side-bolts minimize downtime No steel tool bushings (one bushing made of composite wear-resistant material) lower operating costs Rammer hydraulic impact hammers (Small ) Carrier 111 150 1,000-2,600 4-9 150 1.42 1,800-4,000 255 200 600-3,200 4-9 240 1.57 2,600-5,500 355 350 800-3,000 7-15 330 1.89 3,500-7,900 455 450 700-2,600 11-19 510 2.20 6,000-11,500 555 500 600-1,800 9-24 610 2.83 7,100-17,600 777 750 500-1,700 11-32 850 3.15 9,500-20,900 999 1200 500-1,700 13-40 1,110 3.54 12,800-28,700 Integrated one-piece tool bushing design includes thrust ring, upper and lower bushing and dust seal all in one Vibration dampening prevents carrier damage and improves operator comfort No tie-rods for less maintenance

ALLIED FULL-LINE BROCHURE Rammer hydraulic impact hammers (Mid-) Carrier 1533 2000 550-1,050 21-37 1,920 4.13 22,000-41,900 2155 3000 490-780 32-48 2,770 4.65 35,300-57,300 Slim housing provides operator with good visibility and better accessibility in trenching and demolition applications Safety valve protects the hammer from damage due to excessive hydraulic input VIDAT System includes vibration dampened tie-rods that extend operating life, reduce operating costs and minimize downtime Rammer hydraulic impact hammers (Large ) Carrier 2577 5000 450-750 37-53 3,880 5.31 46,300-66,100 3288 8000 370-630 42-66 5,180 5.59 59,500-88,200 4099 11000 400-560 66-92 7,450 6.54 77,200-132,300 4511 12000 300-480 58-84 8,378 6.89 88,200-154,300 5011 13000 370-530 74-100 10,470 7.48 94,800-176,400 7013 16000 350-450 79-106 15,432 7.99 132,300-220,500 Sound-suppressed housing enhances use in urban areas and provides operator-friendly environment in the cab of carrier VIDAT System includes vibration dampened tie-rods that extend operating life, reduce operating costs and minimize downtime Centralized lubrication system extends service life of the tool and bushings

HYDRAULIC IMPACT HAMMERS Hy-Ram hydraulic impact hammers (Small ) Carrier HR 175 250 700-1,200 4-10 250 1.75 2,000-7,000 HR 230 500 550-1,000 8-15 490 2.34 6,000-13,000 HR 270 750 500-1,000 10-18 650 2.68 8,000-20,000 HR 290 1000 460-900 12-23 950 2.93 13,000-22,000 HR 330 1400 400-840 12-26 1,260 3.35 13,000-26,500 Hy-Ram hydraulic impact hammers (Mid- and Large ) Carrier HR 390 2500 450-800 22-29 2,320 3.86 20,000-29,000 HR 470 3000 450-900 24-36 2,760 4.72 29,000-40,000 HR 560 5000 400-800 34-50 3,710 5.51 40,000-55,000 HR 600 7000 250-600 48-68 6,620 6.02 62,000-88,000 HR 710 11000 200-450 67-87 8,600 7.09 88,000-154,000 Oil and gas operation uses pressurized nitrogen gas-assist to improve efficiency by reducing demand on the carrier s hydraulic system BreakerLube HML (HR 390 and above) mounted on the hammer housing dispenses lubricant each time the hammer is activated (optional)

ALLIED FULL-LINE BROCHURE AR Series hydraulic impact hammers (Small ) Carrier AR 70D 500 500-1,200 10-24 730 2.75 9,000-15,000 AR 75B 750 520-1,000 16-22 740 2.95 12,000-25,000 AR 85B 1100 500-900 16-26 1,185 3.35 14,000-25,000 AR 95B 1500 350-700 18-33 1,600 3.74 16,000-25,000 AR Series hydraulic impact hammers (Mid- and Large ) Carrier AR 110C 2000 400-600 21-30 2,640 4.33 31,000-40,000 AR 120B 2500 400-500 29-39 3,200 4.72 40,000-58,000 AR 130B 3500 400-500 32-43 3,725 5.12 48,000-62,000 AR 140B 5500 400-500 45-53 4,620 5.51 55,000-80,000 AR 165 8000 300-450 50-58 6,500 6.50 73,000-99,000 AR 175 11000 300-400 55-64 8,270 6.89 88,000-154,000 AR 180D 13000 300-400 66-80 12,130 7.09 110,000-165,000 AR 205 16000 300-450 79-105 16,530 8.07 154,000-220,000 Proven design with an optimum combination of weight, power and performance Easy start with minimal downpressure allows operation in any position Steady blow energy for maximum breaking power with every blow Features for 165 and 175 only: High pressure input valve maintains optimum oil flow preventing reverse flow and overflow Upper bushing and thrust ring integrated into one single part allows removal from below for both bushings without disassembly of hammer

MATERIAL AND WASTE HANDLING SYSTEMS / MOBILE SHEARS Contractor's Mechanical Grapple material and waste handling systems Jaw Opening Jaw Closing Upper Jaw Width Lower Jaw Width Carrier in. in. in. in. lbs. lbs. ABG 30C-2 80 12 26 44 2,000 25,000-35,000 ABG 40C-2 94 16 26 44 2,700 35,000-46,000 ABG 50C-2 94 16 32 51 3,600 46,000-65,000 ABG 70C-2 116 20 34 56 5,000 65,000-88,000 ABG 100C-2 130 22 36 61 7,000 88,000-110,000 Completely reinforced internally with box-tine construction Both upper and lower jaws feature thicker, stronger lugs Heavy-duty mounting pad design and heavy-duty stiff arm offer durability for severe applications

ALLIED FULL-LINE BROCHURE AMS Series mobile shears Minimum Excavator 2nd Member (Boom) Minimum Excavator 3rd Member (Stick) Cutting Force Tip/Apex/Throat lbs. lbs. lbs. tons AMS 20 5,000 25,000 40,000 143/265/585 AMS 20R 5,445 30,000 45,000 143/265/585 AMS 30 6,900 38,000 55,000 187/355/795 AMS 30R 7,914 46,000 70,000 187/355/795 AMS 40 8,300 50,000 78,000 201/382/973 AMS 40R 9,788 58,000 93,000 201/382/973 AMS 50 11,910 60,000 105,000 240/467/1,144 AMS 50R 14,000 70,000 115,000 240/467/1,144 AMS 100 15,200 94,000 145,000 290/560/1,600 AMS 100R 18,300 105,000 175,000 290/560/1,600 Fast cycle times from a high-performance, integrated speed valve means lower costs per ton Four-way indexable cutting blades can cut on all four cutting edges Mounting can be optional as the design allows for quick and easy conversion from a rotation system to a non-rotation system

MECHANICAL PULVERIZERS / ROCK BREAKER SYSTEMS / WASTE TRANSFER SYSTEMS AMP Series mechanical pulverizers Full Opening Crushing Force Cutting Force Carrier lbs. in. tons tons lbs. AMP 50 3,920 42 39 110 44,000-66,000 AMP 70 4,660 46 42 121 66,000-84,000 AMP 100 6,780 59 63 143 84,000-110,000 New design allows jaw halves to stay together during disassembly Pin-on jaw design that permits easy transfer between excavators Fitted with replaceable and rebuildable, wear-resistant steel teeth for economical maintenance

ALLIED FULL-LINE BROCHURE Pedestal Breaker System rock breaker and waste transfer systems Horizontal Reach Operating Hammer ft. lbs. ft. lbs. Swing Rotation PowerPortable 8-15 1,700-2,600 200-1,600 300 PowerBoom 10-25 7,430-8,590 550-3,500 180 PowerPlus 20-31 12,600-14,100 1,500-5,500 185 PowerMax 26-40 25,500-29,800 2,000-7,000 300 Rock Breaker System Choice of 40 standard models, ranging from 8 foot to 40 foot horizontal reach with custom configurations available 180, 185 (PowerPlus Series), 190 (Type A Series) swing frame or 300 (PowerMax Series) turntable-style Choice of 24 hydraulic impact breakers from 550 ft. lbs. to 7,000 ft. lbs. andchoice of 5 power units from 30 HP to 100 HP Waste Transfer System Allows the operator to transfer, sort and compact solid wastes quickly and precisely all with the same piece of equipment ally-powered system works like mechanical arm with either 180 or 270 swing rotation for the widest possible working range Grapple attachment lets the operator transfer waste to the shredder, compactor or trailer

VIBRATORY COMPACTOR/DRIVERS / GROUSER BARS / ROTARY ASPHALT CUTTERS Ho-Pac vibratory compactor/drivers Impulse Force Cycles Per Minute Flow Required Base Plate Dimensions Carrier lbs. gpm in. lbs. 300B 3,000 2,000 6/9/14/18 12 x 22 3,000-10,000 500B 5,000 2,000 6/9/14/18 13 x 27 6,000-12,000 700B 6,400 2,000 6/9/14/18 18 x 27 8,000-20,000 1000B 8,000 2,000 12/18/21 24 x 28 9,000-30,000 1600 16,000 2,100 25/30/43 29 x 32 19,000-45,000 2300 24,000 2,100 47 34 x 36 35,000-120,000 4000 40,000 2,100 62/86 42 x 48 77,000-150,000 Larger eccentric with mass further away from shaft centerline helps to increase impulse and compaction force Sealed bearings ( 300B, 500B, 700B and 1000B) or oil splash bearing ( 1600, 2300 and 4000) provide maintenance-free (no greasing) lubrication Four-function valve controls flow, pressure, regeneration and oil flow direction Skid-Pac vibratory compactors Impulse Force Cycles Per Minute Base Plate Dimensions Carrier lbs. gpm in. lbs. 1000B 8,000 2,000 12/18/21 18 x 72 4,000(Minimum) 9 square foot base plate covers the outside width of the skid-steer tires or compact track loader tracks to eliminate marks in the soil Base plate compacts soil in flatwork while the skid-steer or compact track loader is moving forward or in reverse The beveled front and back edges of the base plate push the soil to assist in the leveling of the sub bases

ALLIED FULL-LINE BROCHURE Grip-Lug grouser bars Size Bar Length in. ft. lbs. GL-KK 5/ 8 x 1 x 7/ 16 10 17.6 GL-BB 3/ 4 x 1 3/ 8 x 1/ 2 10 28.2 GL-CC 15/ 16 x 1 5/ 8 x 9/ 16 10 38.1 GL-FF 1 x 2 x 5/ 8 10 52.9 GL-HH 1 5/ 16 x 2 x 1 10 68.0 Restores original equipment quality and drawbar pull to crawler tractor Tough carbon, wear-resistant steel offers excellent service and value Properly welded won t crack from welding heat stresses or break off in use Roto-Cut rotary asphalt cutters Cutting Depth Wheel in. in. lbs. Carrier Type 1200S 3.5 12.0 50 Scarifier or Loader w/block 1200C 3.5 12.0 92 Loader or Backhoe Buckets 1800S 5.5 18.5 100 Scarifier or Loader w/block 1800L 5.5 18.5 173 Loader or Backhoe Buckets 1800C 5.5 18.5 263 Loader or Backhoe Buckets 1800M 5.5 18.5 265 Grader Moldboard Clamps Uses downpressure from the carrier to make clean cuts for digging which means better seals for the final patch Delivers straight smooth cuts up to 5.5 inches deep Extra-hard steel alloy rotary blade stays sharp to keep cutting longer even through high density asphaltic concrete

Allied Distributors are personally selected by the Allied staff and periodically reviewed to make sure they are offering the best, most informative service possible. They have made a commitment to Allied by being fully-prepared with repair tools, knowledge and the best re-placement parts in the business. Through this partnership, Allied continues to change with the markets and meets demands by supplying innovative and improved products to the end-users. Form No. Full-Line 2/14-5M 2014 Allied Construction Products, LLC Allied has a policy of continuous product improvements and reserves the right to change specifications, design or prices any time without obligation.