Plug-in manifold W4G4 Series

Low profile Plug-in manifold W4G4 Series PLUG-IN MANIFOLD W4G4 SERIES Easier to use with additional options CC-845A

Do more with less Less power consumption, less man hours, less footprint, allowing you to do more than ever. Plug-in, manifold W4G4 series. Drives cylinders up to Φ125. MW4GB4-T10 M4TB W4G4 series footprint 40% less power consumption Saves more energy by adopting 1W coils. (DC specifications) Expand with ease Connectors provided between manifold blocks. Frees you from the hassle of wiring and allows you to expand manifolds with less man-hours. 0% less footprint 0% The valve width and length have been decreased to make the manifold more compact -- 0% smaller than before. Restriction free wiring block layout Wiring block can be placed on the left or the right of the manifold Left (model no.: T10) Right (model no.: T10R) * Photograph of commong gland

IP65 or equivalent Ample electric connections CC-Link, DeviceNet, UNIWIRE, UNIWIRE H, common gland or I/O cable connector (individual wiring) available for serial connection Improved safety and reliability The rubber cover installed on manual buttons prevents malfunctions by preventing foreign materials from entering. Rubber cover Common gland I/0 connector Serial transmission D sub-connector CC-Link UNIWIRE UNIWIRE H Device Net CompoBus/S 2 color indicator light Orange (a solenoid) and green (b solenoid) power indicator light. Power indicator light Wide optional variation Spacer type regulator Common exhaust block Locking manual override Manual override operation Rc/8 back porting Push & unlock operation Press down the manual button. Push & lock operation Press down the manual button and rotate 90 Clockwise to lock. Easy and simple piping Large rotation angle for wrenching. Projection free piping joint side lets you use rotary tools without any obstructions, improving the efficiency of piping.

Series variation W4G4 Series Valve performance Voltage Discrete Base side porting Base back porting Series variation/appearance W4GB4*0 W4GZ4*0 Model no. W4GB4 W4GZ4 Position No. of solenoid JIS symbol (dm /(s bar)) Note 1 Flow characteristics C up to 7. Applicable cylinder bore size up to ø125 100 VAC 24 VDC 12 VDC 110 VAC 1 4 5 Individual wiring manifold Reduced wiring manifold Base side porting Base back porting Base side porting Base back porting MW4GB4*0 MW4GZ4*0 MW4GB4*0 Common gland (T10) D sub-connector (T0) Serial transmission (T6*) MW4GZ4*0 Common gland (T10) D sub-connector (T0) I/O connector (R1) I/O connector (R1) Common gland (T10R) D sub-connector (T0R) Serial transmission (T6*R) Common gland (T10R) D sub-connector (T0R) MW4GB4 (NW4GB4) MW4GZ4 (NW4GZ4) MW4GB4 (NW4GB4) MW4GZ4 (NW4GZ4) Individual wiring (-R1) Common gland Left (-T10) Right (-T10R) D sub-connector Left (-T0) Right (-T0R) Serial transmission Left (-T6*) Right (-T6*R) Common gland Left (-T10) Right (-T10R) D sub-connector Left (-T0) Right (-T0R) 5 port valve 2-position single solenoid a 4 2 (A) (B) 5 1 (R1)(P)(R2) 2-position double solenoid 4 2 a (A) (B) b 5 1 (R1)(P)(R2) -position all ports closed 4 2 (A) (B) a b 5 1 (R1) (P) (R2) -position A/B/R connection 4 2 (A) (B) a b 5 1 (R1) (P) (R2) -position P/A/B connection 4 2 (A) (B) a b 5 1 (R1) (P) (R2) up to 8. up to 8. up to 8. up to ø125 up to ø125 up to ø125 Serial transmission (T6*) Serial transmission (T6*R) Serial transmission Left (-T6*) Right (-T6*R) Intro 1

W4G4 Series Series variation Protective structure 2-position Single solenoid Double solenoid Note 1: Effective sectional area S and sonic conductance C are converted as S 5.0 x C. Solenoid position A/B piping port Electric connection All ports Block -position A/B/R connection P/A/B connection Mix Push-in joint ø8 ø10 ø12 Rc 1/4 Rc /8 Female thread G 1/4 G /8 NPT 1/4 NPT /8 C8 C10 C12 08 10 08G 10G 08N 10N Blank R1 T10 T0 T6* Terminal box IO connector Common gland D sub-connector Serial transmission Page IP65 1 IP65 1 IP65 9 IP65 9 IP65-1 IP65 IP65-1 IP65 Intro 2

Discrete Electric connection Individual wiring manifold Reduced wiring manifold Manual override (Provided as standard) Other options Blank Terminal box R1 I/O connector (DC) T10 Common gland (Left) Blank Non-locking/locking common type manual override M7 With OFF function K External pilot Manual override A port B filter F Integrated Z1 Air supply spacer Lead wire length 500mm Air supply spacer Main pressure and Individual circuit specifications of pilot pressure A/port B filter R1 I/O connector (DC) T10R Common gland M Non-locking (Right) manual override A Coolant proof Z Exhaust spacer Lead wire length 500mm Locking Slide upwards to turn pilot air off Original position during normal use. Resistant to entry of cutting oil Exhaust spacer T0 D sub-connector (Left) Z7 S p a c e r t y p e regulator T0R D sub-connector (right) T6* Serial transmission (Left) Electric connection circuit diagram (Inside the solenoid valve) With light and surge suppressor (provided as standard) ( ) A ( ) A SOLa Serial transmission T6*R (Right) Single solenoid AC ( ) COM ( ) A DC ( ) COM SOLa SOLa Double solenoid AC ( ) ( ) ( ) DC ( ) ( ) COM B A COM B SOLb SOLa SOLb Intro

Safety precautions Always read this section before starting use. When designing and manufacturing a device using CKD products, the manufacturer is obligated to check that device safety mechanism, pneumatic control circuit, or water control circuit and the system operated by electrical control that controls the devices is secured. It is important to select, use, handle, and maintain the product appropriately to ensure that the CKD product is used safely. Observe warnings and precautions to ensure device safety. Check that device safety is ensured, and manufacture a safe device. WARNING 1 This product is designed and manufactured as a general industrial machine part. It must be handled by an operator having sufficient knowledge and experience in handling. 2 Use this product in accordance of specifications. This product must be used within its stated specifications. It must not be modified or machined. This product is intended for use as a general-purpose industrial device or part. It is not intended for use outdoors or for use under the following conditions or environment. (Note that this product can be used when CKD is consulted prior to use and the customer consents to CKD product specifications. The customer must provide safety measures to avoid risks in the event of problems) 1 Use for special applications including nuclear energy, railway, aircraft, marine vessel, vehicle, medicinal devices, devices or applications coming into contact with beverages or foodstuffs, amusement devices, emergency cutoff circuits, press machines, brake circuits, or safety devices or applications. 2 Use for applications where life or assets could be adversely affected, and special safety measures are required. Observe corporate standards and regulations, etc., related to the safety of device design and control, etc. ISO4414, JIS B870 (pneumatic system rules) JFPS2008 (principles for pneumatic cylinder selection and use) High Pressure Gas Maintenance Law, Occupational Safety and Sanitation Laws, other safety rules, standards and regulations, etc. 4 Do not handle, pipe, or remove devices before confirming safety. 1 Inspect and service the machine and devices after confirming safety of the entire system related to this product. 2 Note that there may be hot or charged sections even after operation is stopped. When inspecting or servicing the device, turn off the energy source (air supply or water supply), and turn off power to the facility. Discharge any compressed air from the system, and pay enough attention to possible water leakage and leakage of electricity. 4 When starting or restarting a machine or device that incorporates pneumatic components, make sure that the system safety, such as pop-out prevention measures, is secured. 5 Observe warnings and cautions on the pages below to prevent accidents. The precautions are ranked as "DANGER", "WARNING", and "CAUTION" in this section. DANGER: When a dangerous situation may occur if handling is mistaken, leading to fatal or serious injuries, or when there is a high degree of emergency to a warning. WARNING: When a dangerous situation may occur if handling is mistaken, leading to fatal or serious injuries. CAUTION: When a dangerous situation may occur if handling is mistaken, leading to minor injuries or physical damage. Note that some items described as CAUTION may lead to serious results depending on the situation. In any case, important information that must be observed is explained. Disclaimer 1. CKD cannot be held liable for any business interruption, loss of profit, personal injury, delay cost, or any other ancillary or indirect loss, cost, or damage resulting from the use of or faults in the use of CKD products. 2. CKD cannot be held responsible for the following damage. 1 Damage resulting from disaster or failure of CKD parts due to fire from reasons not attributable to CKD, or by intentional or negligence of a third party or customer. 2 Damage that could have been avoided if customer equipment with the CKD product(s) installed were provided with functions and structure, etc., generally accepted in the industry. Damage resulting from use exceeding the scope of specifications provided in CKD catalogs or instruction manuals, etc., or from actions not following precautions for installation, adjustment, or maintenance, etc. 4 Damage resulting from product modifications not approved by CKD, or from faults due to combination with other software or other connected devices. Intro 4

Pneumatic components Safety precautions Always read this section before starting use. Refer to Pneumatic valves Catalog No. CB-02SA for the general valves. Specific Precautions: Pilot operated 5 port valve W4G4 Series Design & Selection 1. Design for Safety WARNING Use the product in accordance of specifications. Products in this catalog are for use only in a compressed air system. Use with pressure or temperature exceeding the specification range may result in damage or operation faults. (Refer to the specifications). Consult with CKD when using fluids other than compressed air When using the -position valve all port block as a brake, operation will not stop at the precise position due to air compression. There will be air leakage if cylinders and valves are used for pressure holding applications, so the brake position may change or pressure may drop. Take measures to prevent harm to operators or objects if this product fails. 2. Common WARNING Do not block exhaust port of a manifold valve. Other cylinders could malfunction due to back pressure generated by switch valve exhaust. In this case, exhaust from both sides of the manifold or replace the valve that is causing a problem with a discrete exhaust valve with a spacer or install individually valve. CAUTION Keep momentary power on and limit manual operation of the double-solenoid 2-position valve to 0.1 seconds or longer. Note that the cylinder may malfunction depending on secondary load conditions, so power ON and manual operations should be continued until the cylinder reaches the stroke end. Use dry compressed air that does not cause condensation in piping. CAUTION Check leakage current to prevent malfunction caused by leakage current from other fluid control components. When using a programmable logic controller, etc., the solenoid valve could malfunction due to leakage current. The value affected by leakage current differs with the solenoid valve. Dryer Air filter PLC Drainage will form if the temperature drops in the pneumatic piping or pneumatic components. Operation faults could occur if drainage enters the air flow path in pneumatic components or if it temporarily blocks passage. Drainage could cause rust, causing the pneumatic device to fail. Drainage may also wash out lubricant and cause lubrication failures. For 100 VAC For 12 VDC For 24 VDC.0mA or less 1.5mA or less 1.8mA or less Intro 5

W4G4 Series Design & Selection. Working environment CAUTION Tested for IP65 (IEC60529 (IEC529: 1989-11)) standards Avoid use in condition which water or coolant could directly contact the valve. Explanation of test procedure and protection property symbols of IP65 Protective structure Note: IP-65 standard is tested as follows. IEC (International Electrotechnical Commission) standards (IEC60529 (IEC529: 1989-11)) IP- * * Protection property symbols (International Protection) The surge suppressor limits solenoid valve surge voltage, which can reach several hundred volts, to a lower voltage level withstandable by the output contact. Depending on the output circuit used, this may be insufficient and could result in damage or malfunction. Check whether the surge suppressor can be used by the surge voltage limit of the solenoid valve in use, the output device's withstand pressure and circuit structure, and by the degree of return delay time. If necessary, provide other surge measures. Solenoid valves with surge suppressors suppress the reverse voltage surge generated during OFF operation to the levels below. Rated voltage Reverse voltage value when power turned OFF 12 VDC Approx. 27V 24 VDC Approx. 47V When using the NPN output unit, a surge voltage equivalent to the voltage above plus the power voltage surge could be applied. Provide contact protection circuit. (output transistor protection circuit, parallel setting example 1) 1st characteristic number (protection grade for foreign solid) Grade Degree of protection Dust proof type Powder and dust will not go inside. 6 2nd characteristic number (Protective class against entry of water) Grade Degree of protection Overview of test procedure (fresh water used) Protection for jet Undamaged even Using the following test device, spray water if water is sprayed for 1 minute per 1m 2 of test sample surface by nozzles from a r e a f r o m a l l 12.5L/min. 2.5 to m all directions. directions, for a 5 total of minutes or more. 4. Alternating current voltage specifications CAUTION AC voltage specifications are built into all wave rectification circuits. When using SSR to turn the solenoid valve on and off, solenoid valve recovery could fail. Beware when selecting the SSR. (Consult with the relay or PLC manufacturuer) 5. Surge suppressor CAUTION Spray nozzle bore size: ø6.mm The surge suppressor included with the solenoid valve is to protect the output contact for that solenoid valve's drive. There is no significant protection for other devices in the area, and the surge may cause damage or malfunctions. Surge generated by other devices could be absorbed and cause damage such as burning. Care must be taken for points below. (output transistor protection circuit, parallel setting example 2) Reverse voltage malfunction OFF If another device or solenoid valve is connected in parallel to the solenoid valve, reverse voltage surge generated when the solenoid valve is off is applied to these devices. Even when using the solenoid valve with a 24 VDC surge suppressor, the surge voltage could reach several tens of volts depending on the model. This reverse polarity voltage could damage devices connected in parallel or cause them to malfunction. Do not connect components that is weak against reverse polarity (ex. LED) in parallel. When driving multiple solenoid valves in parallel, the surge from other solenoid valves could enter the surge suppressor of one solenoid valve with a surge suppressor. Depending on the current value, that surge suppressor could burn. When driving multiple solenoid valves with surge suppressors in parallel, surge current could concentrate at the surge suppressor with the lowest limit voltage and cause similar burning. Even if the solenoid valve type is the same, the surge suppressor's limit voltage can be inconsistent, and in the worst case, could result in burning. Avoid driving several solenoid valves in parallel. Solenoid valve ON Solenoid valve The surge suppressor incorporated in the solenoid valve shortcircuits often if damaged by overvoltage or overcurrent from a source other than the solenoid valve. If the surge suppressor fails, if a large current flows when output is on, the output circuit or solenoid valve could be damaged or ignite. Do not keep power on in a faulty state. Provide an overcurrent protection circuit on the power or drive circuit or use a power supply with overcurrent protection so that a large current does not flow continuously. 6. Partition plug CAUTION ON Programmable Controller side Programmable Controller side Solenoid valve ON-OFF Solenoid valve side Solenoid valve side Example of failure Example of countermeasure 2 OFF ON-OFF Consult our sales representative when using partition plugs. Solenoid valve ON Solenoid valve Countermeasure diode ON Solenoid valve Intro 6

W4G4 Series Design & Selection 7. Exhaust cleaner CAUTION Refer to "Pneumatic, Vacuum and Auxiliary Components " (Catalog No. CB-024SA-7) for details on exhaust filters. Installation & Adjustment 1. Common CAUTION Port indication Port positions such as 1P and 4A, etc., are indicated in accordance with ISO and JIS standards. Applications ISO standards JIS standards Supply port 1 P Output port 4 A Output port 2 B Exhaust port 5 R1 Exhaust port R2 Pilot air supplying port 12/14 PA Pilot exhaust port 82/84 PR Valves can be mounted in any positions. Check the port symbol when piping to prevent reverse flow and etc. 2. Port filter CAUTION Port filter is used to prevent foreign materials from entering, to prevent problems in a valve. This does not improve the quality of the compressed air, so read Warnings and Precautions, then install, and adjust the filter accordingly. Do not remove or force the port filter. The filter could deform and result in problems. If contaminants and foreign materials are found on the filter surface, blow lightly, or remove them by tweezers, etc. Example of installing A/B port filter Apply adequate torque when connecting pipes to prevent air leaks and to protect thread. Tighten by hand at first, then tighten using tools so that screw thread is not damaged. Filter For female thread type. Spacer type regulator Filter For cartridge joint (Reference value) Port thread Tightening torque N m Rc1/8 to 5 Rc1/4 6 to 8 Rc/8 1 to 15 Rc1/2 16 to 18 Rc/4 19 to 40 CAUTION After adjusting pressure, tighten and fix the hexagon nut to prevent the adjustment screw from loosening. 4. Exhaust cleaner CAUTION The exhaust cleaner must be facing the bottom when installed. During Use & Maintenance 1. Assembling & Disassembling CAUTION When assembling or disassembling valves, read the instruction manual of the product very well and understand the contents before disassembling and assembling the product. Understand the structure and operational principle of the solenoid valve to secure safety. Intro 7 2. Pneumatics pressure source CAUTION If a pre-lubricated valve is once lubricated, oil-free property can not be maintained. Once lubricated, continue lubricating. Pneumatic components are to be oil-free or to be lubricated. The user must decide the lubrication method and the lubrication must be done accurately When using a lubricant, only use ISO VG2 (additive-free) turbine oil.

During Use & Maintenance W4G4 Series Specific precautions. Valve replacement CAUTION Check that the gasket does not fall off when replacing and installing the valve. Mounting bolt Thread size Hexagonal wrench Adequate tightening size torque (N m) Hexagon socket head cap bolt M4 Nominal 2.4 to 2.6 4. Manual override WARNING How to operate manual override Push and unlock operation Hold down the manual button. Output port destination list Solenoid position OFF function (energized side M7 switch) De-energized side manual No operation Operation (OFF) Operation 2-position Single solenoid a side solenoid energized 4 (A) 2 (B) - Double solenoid a side solenoid energized 4 (A) 4 (A) 2 (B) b side solenoid energized 2 (B) 2 (B) 4 (A) -position All ports a side solenoid energized 4 (A) 4 (A) 2 (B) Block b side solenoid energized 2 (B) 2 (B) 4 (A) A/B/R connection P/A/B connection a side solenoid energized 4 (A) - 2 (B) b side solenoid energized 2 (B) - 4 (A) a side solenoid energized 4 (A) 4 (A) /2 (B) 2 (B) b side solenoid energized 2 (B) 4 (A) /2 (B) 4 (A) How to operate M7 switch 1 When using OFF function Slide the M7 switch in the direction of the arrow until it stops. The switch will not be released even when released. Push and lock operation Push down and rotate the manual button 90 degrees clockwise to lock. Confirm that there are no people near the moving cylinder when conducting manual operations. When using locking/non-locking common type manual override, always unlock before returning to normal operation to prevent malfunctions. Do not use damaged products. 2 During normal use Return the M7 switch to the original position. WARNING When conducting manual operations, make sure that there are no people near the moving cylinder. 6. How to replace cartridge joint CAUTION Check procedures before changing the push-in joint size. Problems such as air leakage could occur if the joint is not installed properly or if mounting threads are not tightened sufficiently. Joint stopper plate Set screw CAUTION Always push and turn when locking to prevent damage. The protective cover will not close unless the lock is released. 5. Pilot air OFF function (M7) CAUTION The supply of pilot air will be forced to stop when power is on, so the main valve can be switched even when power is on. When using the OFF function, caution is required because the cylinder moves immediately when using the 2-position single and -position ABR connection or PAB connection. 1 2 4 Remove the set screw. Pull out the joint stopper plate and joint together. Align the stopper plate with the groove on the replacement joint, and assemble temporarily. Assemble the stopper plate and joint together, and tighten the set screw. Pull on the joint to confirm that it is properly installed. (Tightening torque: 0.55 to 0.65N m) Cartridge type push-in joint model no. Model Part name Model no. W4G4 ø8 straight 4G4-JOINT-C8 ø10 straight ø12 straight 7. Exhaust cleaner CAUTION 4G4-JOINT-C10 4G4-JOINT-C12 Applying undue external force to an exhaust cleaner will result in failure. Intro 8

Discrete Base side porting, back porting W4GB4/W4GZ4 Series Applicable cylinder bore size: ø6 to ø125 (DC voltage) Common specifications Descriptions Type of valve / operation method Working fluid W4GB4/W4GZ4 Pilot operated soft spool valve Compressed air Max. working pressure MPa 1.0 Min. working pressure MPa 0.2 Withstanding pressure MPa 1.50 Ambient temperature -5 to 55 (no freezing) Fluid temperature 5 to 55 Manual override Non-locking type (standard) Lubrication Note 1 Not required Protective structure Note 2 Dust proof/jet-proof (IP65 equivalent) Vibration/shock m/s 2 49 or less/294 or less Working environment Corrosive gas not permissible. Note 1: Use the turbine oil Class 1 ISO VG2 if lubricated. Excessive lubrication will result in unstable operation. Note 2: Tested with IP65 (IEC60529 [IEC529: 1989-11]) standards test. Refer to Intro 6 for details. Note : The working pressure range is 0 to 1.0 MPa when the external pilot (option symbol: K) is selected. Use within external pilot pressure of 0.2 to 1.0MPa. Electric specifications Descriptions W4GB4/W4GZ4 Rated voltage DC 12, 24 V AC 100 (50/60Hz) 110 (50/60Hz) Rated voltage fluctuation range ±10% Holding current 12 VDC 0.100 24 VDC 0.050 A 100 VAC 0.024 110 VAC 0.024 Power consumption 12 VDC 1.2 W Note 4 24 VDC 1.2 Apparent power 100 VAC 2.4 VA 110 VAC 2.6 Heat proof class B (molded coil) Note 4: Surge suppressor and indicator are provided as standard. JIS symbol 5 port valve 2-position single solenoid 4 2 a (A) (B) 5 1 (R1)(P)(R2) 2-position double solenoid 4 2 a (A) (B) b 5 1 (R1)(P)(R2) -position all ports closed 4 2 (A) (B) a b 5 1 (R1) (P) (R2) -position A/B/R connection 4 2 (A) (B) a b 5 1 (R1) (P) (R2) -position P/A/B connection 4 2 (A) (B) a b 5 1 (R1) (P) (R2) Individual specifications Port size Descriptions Flow characteristics ON W4GB4/W4GZ4 Response time ms 2-position Single solenoid 0 8 OFF Double solenoid 0 - -position A/B/R connection 50 58 Response time is the value at supply pressure 0.5MPa, 20 C and oilless. The value will change based on pressure and quality of oil. Descriptions Terminal box I/O connector Weight g 2-position Single solenoid 701 755 Model no. W4GB4 Descriptions W4GB4 W4GZ4 P/A/B port R port Double solenoid 745 799 -position All ports closed 777 81 Solenoid position Rc1/4, Rc/8, G1/4, G/8, NPT1/4, NPT/8 Rc1/4, Rc/8, G1/4, G/8, NPT1/4, NPT/8 P A/B A/B R C (dm / (s/bar)) b C (dm / (s/bar)) b 2-position 7.7 0.1 7. 0.16 All ports closed 6.6 0.19 6.4 0.21 -position A/B/R connection 6.5 0.15 7. 0.04 P/A/B connection 7.4 0.21 7.1 0.16 Note 1: Effective sectional area S and sonic conductance C are converted as S 5.0 x C. Note 2: Values for flow characteristics are for port size Rc/8. Rc1/4, G1/4, NPT1/4 PA/PR port Rc1/8, G1/8, NPT1/8 Rc1/8, G1/8, NPT1/8 Coolant proof specifications 1 Select option "A" in section (E) in "How to order" on page 2.

How to order Discrete W4GB4 0 10 R1 MF W4GZ4 0 10 R1 M7 Discrete sub-plate only W4GB4 SP 10 R1 W4GZ4 SP 10 R1 A Model no. B Solenoid position Note on selection guide C Port size Note 1: (R2) and 5 (R1) ports are Rc1/4 for back porting. Note 2: (R2) and 5 (R1) ports are G1/4 for back porting. Note : (R2) and 5 (R1) ports are NPT1/4 for back porting. Note 4: Only DC specifications are available with an I/O connector. Note 5: Do not select M or M7 with locking/non-locking common type manual override. Note 6: Both non-locking manual override and locking device with pilot air OFF function are provided. Locking/non-locking common type manual override can not be selected together. Electric connection D Electric connection E Option Name Terminal box I/0 connector (DC) Symbol Blank R1 Shape Sub-plate M12 4 pin Male (plug) K K F Voltage W4GB4/W4GZ4 Series Discrete valve: base side porting and back porting B Solenoid position 1 2-position single solenoid 2 2-position double solenoid -position all ports closed 4 -position ABR connection 5 -position PAB connection C Port size {1 (P), 2 (B), 4 (A) ports} Discrete Plate onlyw4gb4a Model no. W4GZ4Discrete sub 08 Rc1/4 Note 1 Note 1 10 Rc/8 Note 1 Note 1 08G G1/4 Note 2 Note 2 10G G/8 Note 2 Note 2 08N NPT1/4 Note Note 10N NPT/8 Note Note D Electric connection (light and surge suppressor provided as standard) Blank Terminal box R1 I/O connector (500mm for DC) Note 4 E Option Blank M No option Note 5 (Non-locking/locking common type manual override if M or M7 is not selected.) Non-locking manual override (standard) M7 Lock with pilot air OFF Note 6 K A F F Voltage External pilot Coolant proof A/B port filter 1 100 VAC 24 VDC 4 12 VDC 5 110 VAC is not available Kit model no. for terminal box type Cable clamp (with gasket) Model no. W4G-OA-W1608C1 G1/2 Gasket Descriptions This is used to protect cable from dust and jet. W4GW4GZ4Symbol Descriptions B421 Terminal Arrangement B COM A 2: B 1: COM (NPN) : COM 4: A (PNP) Applicable cable outer diameter Applicable cable outer diameter : ø6 to ø8 (Reference value) Cable clamp body tightening torque : 2.0 to 2.4N m Tightening cap tightening torque : 0.5 to 0.7N m 2

W4GB4/W4GZ4 Series Discrete valve: base side porting and back porting Dimensions W4GB410 Side porting Terminal box (blank) 2-Rc1/4 or Rc/8 4 (A), 2 (B) port 74.5 49.5 2-ø5.5 (Installation hole) 149.5 10 75 15 Manual override section light display G1/2 Wiring outlet Rc1/8 82/84 (PR) port 104 -Rc1/4 or Rc/8 5 (R1), 1 (P), (R2) port 24 24 9 62 14.5 W4GZ410 Terminal box (blank) Back porting 2-Rc1/4 5 (R1), (R2) port 25.5 25.5 62 1 26.5 0.5 8 55 25 0.5 -Rc1/4 or Rc/8 1 (P), 4 (A), 2 (B) port 25 49.5

Dimensions W4GB420 Side porting Terminal box (blank) 2-Rc1/4 or Rc/8 4 (A), 2 (B) port W4GB4/W4GZ4 Series Discrete valve: base side porting and back porting 74.5 49.5 25 0.5 2-ø5.5 (Mounting hole) 149.5 86 75 17 15 7 8 55 2-manual override section 2-light indicator G1/2 Wiring outlet Rc1/8 82/84 (PR) port 0.2 104 0.5 -Rc1/4 or Rc/8 5 (R1), 1 (P), (R2) port 24 24 9 62 14.5 W4GZ420 Back porting Terminal box (blank) 2-Rc1/4 5 (R1), (R2) port 25.5 25.5 62 1 26.5 -Rc1/4 or Rc/8 1 (P), 4 (A), 2 (B) port 25 49.5 4

W4GB4/W4GZ4 Series Discrete valve: base side porting and back porting Dimensions W4GB 4 0 Side porting 5 Terminal box (blank) 2-Rc1/4 or Rc/8 4 (A), (B) port 74.5 49.5 25 0.5 2-ø5.5 (Mounting hole) 149.5 86 75 17 15 7 8 55 2-manual override section 2-light indicator Rc1/8 82/84 (PR) port G1/2 Wiring outlet 0.2 0.5 104 -Rc1/4 or Rc/8 5 (R1), 1 (P), (R2) port 24 24 9 62 14.5 W4GZ 4 0 Back porting 5 Terminal box (blank) 2-Rc1/4 5 (R1), (R2) port 25.5 25.5 62 1 26.5 -Rc1/4 or Rc/8 1 (P), 4 (A), 2 (B) port 25 49.5 5

Dimensions W4GB4/W4GZ4 Series Discrete valve: base side porting and back porting Non-locking, common lock type manual override (blank) 74.5 2-Rc1/4 or /8 4 (A), 2 (B) port 49.5 25 0.5 149.5 7 86 17 2-ø5.5 (Mounting hole) 75 15 8 55 2-manual override section 2-light indicator G1/2 Wiring outlet Rc1/8 82/84 (P port R) 0.2 116.4 0.5 -Rc1/4 or /8 5 (R1), 1 (P), (R2) port 24 24 14.5 9 62 6

W4GB4/W4GZ4 Series Discrete valve: base side porting and back piping Dimensions With pilot air OFF function (M7) 2-Rc1/4 or Rc/8 4 (A), 2 (B) port 74.5 49.5 25 0.5 2-ø5.5 (Mounting hole) 149.5 86 75 17 15 7 8 55 Pilot air OFF function switch (locking) a side 2-manual override section 2-light indicator Pilot air OFF function switch (locking) b side G1/2 Wiring outlet Rc1/8 82/84 (PR) port 0.2 104 0.5 -Rc1/4 or Rc/8 5 (R1), 1 (P), (R2) port 24 24 9 62 14.5 External pilot (K) I/O connector (R1) Use cable: VA-4DBXO5KUG-CKD276-PG7 (CORRENS) Rc1/8 12/14 (PA) port (475) Connector M12 with cable 4 pin male (plug) 2.4 4.5 7

M E M O 8

Individual wiring manifold Base side porting and back porting B MW4G Z 4-R1 Series Applicable cylinder bore size: ø6 to ø125 Common specifications Descriptions MW4GB4 MW4GZ4 Manifold type Air supply and exhaust method Pilot exhaust method Piping direction Type of valve/operation method Working fluid Block manifold Common supply and common exhaust Main valve and pilot valve individual exhaust Sub-base side porting Sub-base bottom porting Pilot operated soft spool valve Compressed air Max. working pressure MPa 1.0 Min. working pressure MPa 0.2 Withstanding pressure MPa 1.5 Ambient temperature -5 to 55 (no freezing) Fluid temperature 5 to 55 Manual override Non-locking type (standard) Lubrication Note 1 Not required Protective structure Note 2 Dust proof/jet-proof (IP65 or equivalent) Vibration/shock m/s 2 49 or less/294 or less Working environment Corrosive gas not permissible. Note 1: Use the turbine oil Class 1 ISO VG 2 if lubricated. Excessive lubrication will result in unstable operation. Note 2: Tested to IP65 (IEC60529 (IEC529: 1989-11)) standards. Refer to Intro 6 for details. Note : The working pressure range is 0 to 1.0 MPa when the external pilot (option symbol: K) is selected. Use within external pilot pressure of 0.2 to 1.0MPa. JIS symbol 5 port valve 2-position single solenoid 4 2 a (A) (B) 5 1 (R1)(P)(R2) 2-position double solenoid 4 2 a (A) (B) b Individual specifications Electric specifications Descriptions MW4GB4 MW4GZ4 Maximum station number 16 Port size P port A/B port R port PA/PR port Descriptions Note 4: Surge suppressor and indicator are provided as standard. Rc1/4, Rc/8, G1/4, G/8, NPT1/4, NPT/8, Push-in joint ø8, ø10, ø12 Rc1/2, G1/2, NPT1/2 Rc1/2, G1/2, NPT1/2 Rc1/8, G1/8, NPT1/8 MW4GB4/MW4GZ4 Rated voltage V DC 12, 24 Rated voltage fluctuation range ±10% Holding current A 12 VDC 0.100 24 VDC 0.050 Power consumption 12 VDC 1.2 W Note 4 24 VDC 1.2 Heat proof class Wiring method B (molded coil) I/O connector (DC) Rc1/4, G1/4, NPT1/4, Rc/8 9 5 1 (R1)(P)(R2) -position all ports closed 4 2 (A) (B) a b 5 1 (R1) (P) (R2) -position A/B/R connection 4 2 (A) (B) a b 5 1 (R1) (P) (R2) -position P/A/B connection 4 2 (A) (B) a b 5 1 (R1) (P) (R2) Descriptions Flow characteristics MW4GB4/MW4GZ4 ON OFF Response time ms 2-position Single solenoid 0 8 Double solenoid 0 - -position A/B/R connection 50 58 Response time is the value at supply pressure 0.5MPa, 20 C and oilless. The value will change based on quality of pressure and oil. Model no. W4GB4 Solenoid position P A/B A/B R C (dm / (s/bar)) b C (dm / (s/bar)) b 2-position 7.4 0.24 7.9 0.0 All ports closed 6.4 0.22 7.1 0.2 -position A/B/R connection 6.4 0.17 8. 0.28 P/A/B connection 7.1 0.16 7.4 0.28 Note 1: Effective sectional area S and sonic conductance C are converted as S 5.0 x C. Note 2: Flow characteristics are values for port size Rc/8. Coolant proof specifications Select option "A" in section (E) in "How to order" on page 2.

MW4GNW4GNW4GW4GB4Symbol Descriptions How to order Manifold model no. Individual wiring I/O connector MW4GB4 8 0 10 R1 M 6 B MW4G Z 4-R1 Series Individual wiring manifold: base side porting and back porting Manifold solenoid valvemw4gba Model no. Discrete valve block Discrete with solenoid valve Discrete valve block with solenoid valve NW4GB4 1 0 10 R1 M7 NW4GZ4 1 0 08N R1 M7 4 Discrete solenoid valve W4GB4 A Model no. 1 9 00 M B Solenoid position B Solenoid position 1 2-position single solenoid 2 2-position double solenoid -position all ports closed 4 -position ABR connection 5 -position PAB connection 8 Mix manifold 4Z4B4Z4MW4GZ4 8 0 08 R1 M 6 C Port size D Electric connection E Option C Port size {2 (B), 4 (A) port} 08 Rc1/4 10 Rc/8 08G G1/4 10G G/8 08N NPT1/4 10N NPT/8 C8 ø8 push-in C10 ø10 push-in C12 ø12 push-in CX Push-in joint mix HX Screw-in mix D Electric connection (light and surge suppressor provided as standard) R1 I/O connector (500mm) E Option Blank No option Note 1 (Non-locking/locking common type manual override if M or M7 is not selected.) M Non-locking manual override (standard) M7 Lock with pilot air OFF Note 2 Z1 Air supply spacer Note Z Exhaust spacer Note Z7 Spacer type regulator Note 4 K External pilot Note 5 Note 5 Note 5 A Coolant proof F A/port B filter Note 6 Note on selection guide F Station number F Station number 1 1 station to to 16 16 station Fill out "manifold specifications". Note 1: Do not select M or M7 with locking/non-locking common type manual override. Note 2: Both lock equipment with non-locking manual override and pilot air OFF function are provided. Non-locking/ locking common type manual over drive can not be selected with lock device with OFF function. Note : Specify the spacer mounting location and quantity in manifold specifications. Refer to a 7 page for the details. Note 4: The stacked assembly of the spacer is available as a special order. Note 5: This is internal and external pilot common. G Voltage G Voltage 24 VDC 4 12 VDC is not available 10

B MW4G Z 4-R1 Series Individual wiring manifold: base side porting and back porting Manifold components explanation and parts list Valve set screw 5 4 Tie rod set screw Gasket Tie rod 2 1 Gasket Main parts list (refer to page 27 to 8 for details) No. Component name Model no. (example) No. Component name Model no. (example) 1 End block L NW4G4-EL 4 Discrete solenoid valve W4GB419-00-M- 2 Discrete valve block NW4GB4-V-10-R1 5 End block R NW4G4-ER Discrete valve block with solenoid valve NW4GB410-10-R1M- Component weight (DC specifications) Component Weight Component Weight End block NW4G4-EL 16 Discrete valve block with masking plate NW4GB4-MP-10-R1 415 NW4G4-ER 08 NW4GZ4-MP-08-R1 448 Discrete valve block with solenoid valve NW4GB410-10-R1M- 584 Tie rod W4G4-TR-V1 (2 pc. per set) 16 NW4GB420-10-R1M- 629 W4G4-TR-V2 (2 pc. per set) 6 NW4GB40-10-R1M- 661 Tie rod set screw (2 pc.) 16 NW4GZ410-08-R1M- 617 NW4GZ420-08-R1M- 662 NW4GZ40-08-R1M- 694 (g) Repair parts and related parts list No. Parts name Model no. - Cartridge type ø8 straight 4G4-JOINT-C8 push-in joint and ø10 straight 4G4-JOINT-C10 related parts ø12 straight 4G4-JOINT-C12 Blanking plug GWP10-B for ø8, GWP8-B for ø10 GWP12-B for ø12 11

Dimensions MW4GB4 Side porting I/O connector (R1) B MW4G Z 4-R1 Series Individual wiring manifold: base side porting and back porting Use cable: VA-4DBXO5KUG-CKD276-PG7 (CORRENS) L2= (25 n) + (25 l) +76 Connector M12 with cable 4 pin male (plug) 6.5 L1= (25 n) + (25 l) +6 (n: valve block no. : partition block no.) 8 25 25 25 8 122 40.6 18.6 (480) (20) 4-R4.5 (Mounting hole) 14 106 9 122.5 (single solenoid) 14 (double solenoid) 152 (-position) 21 21 6-Rc1/2 5 (R1), 1 (P), (R2) port 7.6 48 65 Non-locking, common lock type manual override (blank) 14.5 Push-in joint for valve block ø8 (C8) ø10 (C10) ø12 (C12) MW4GZ4 Back porting I/O connector (R1) 44 2n-Rc1/4, Rc/8 4 (A), 2 (B) port 24 5 10 Light indicator Manual override section 2-Rc1/8 82/84 (PR) port 20. For K (external pilot) 2-Rc1/8 12/14 (PA) port 59 27.6 17 10.5 76 50.5 2n-Rc1/4, Rc/8, C8, C10, C12 4 (A), 2 (B) port 15 21 2 12

Reduced wiring manifold Base side porting and back porting B MW4G Z 4-T1//6 Series Applicable cylinder bore size: ø6 to ø125 (DC voltage) Common specifications Descriptions MW4GB4 MW4GZ4 Manifold type Air supply and exhaust method Pilot exhaust method Piping direction Type of valve/operation method Working fluid Block manifold Common supply and common exhaust Main valve and pilot valve individual exhaust Sub-base side piping Sub-base bottom piping Pilot operated soft spool valve Compressed air Max. working pressure MPa 1.0 Min. working pressure MPa 0.2 Withstanding pressure MPa 1.5 Ambient temperature -5 to 55 (no freezing) Fluid temperature 5 to 55 Manual override Non-locking type (standard) Lubrication Note 1 Not required Protective structure Note 2 Dust proof/jet-proof (IP65 or equivalent) Vibration/shock m/s 2 49 or less/294 or less Working environment Corrosive gas not permissible. Note 1: Use the turbine oil Class 1 ISO VG 2 if lubricated. Excessive lubrication will result in unstable operation. Note 2: Tested to IP65 (IEC60529 (IEC529: 1989-11)) standards. Refer to Intro 6 for details. Note : The working pressure range is 0 to 1.0 MPa when the external pilot (option symbol: K) is selected. Also, use within external pilot pressure of 0.2 to 1.0MPa. Electric specifications Descriptions MW4GB4/MW4GZ4 Rated voltage DC 12, 24 Note 4 V AC 100 (50/60Hz) 110 (50/60Hz) Rated voltage fluctuation range 10% Holding current 12 VDC 0.100 24 VDC 0.050 A 100 VAC 0.024 110 VAC 0.024 Power consumption W 12 VDC 1.2 Note 5 24 VDC 1.2 Apparent power 100 VAC 2.4 VA 110 VAC 2.6 Heat proof class B (molded coil) Note 4: Serial transmission connection is used only with 24 VDC. Note 5: Surge suppressor and indicator are provided as standard. 1 JIS symbol 5 port valve 2-position single solenoid 4 2 a (A) (B) 5 1 (R1)(P)(R2) 2-position double solenoid 4 2 a (A) (B) b 5 1 (R1)(P)(R2) -position all ports closed 4 2 (A) (B) a b 5 1 (R1) (P) (R2) -position A/B/R connection 4 2 (A) (B) a b 5 1 (R1) (P) (R2) -position P/A/B connection 4 2 (A) (B) a b 5 1 (R1) (P) (R2) Individual specifications Descriptions MW4GB4 MW4GZ4 T10 (R) T0 (R) T6*1 (R) T10 (R) T0 (R) T6*1 (R) Common gland D sub-connector Serial transmission Common gland D sub-connector Serial transmission Standard wiring 16 Maximum station number Double wiring 8 Maximum solenoid number 16 Port size P port A/B port R Port PA/PR port Descriptions Rc1/4, Rc/8, G1/4, G/8, NPT1/4, NPT/8, Push-in joint ø8, ø10, ø12 Rc1/2, G1/2, NPT1/2 Rc1/2, G1/2, NPT1/2 Rc1/8, G1/8, NPT1/8 Rc1/4, G1/4, NPT1/4, Rc/8 MW4GB4/MW4GZ4 ON OFF Response time ms 2-position Single solenoid 0 8 Double solenoid 0 - -position A/B/R connection 50 58 Response time is the value at supply pressure 0.5MPa, 20 C and oilless. The value will change based on quality of pressure and oil. Flow characteristics Model no. W4GB4 Solenoid position P A/B A/B R C (dm / (s bar)) b C (dm / (s bar)) b 2-position 7.4 0.24 7.9 0.0 All ports closed 6.4 0.22 7.1 0.2 -position A/B/R connection 6.4 0.17 8. 0.28 P/A/B connection 7.1 0.16 7.4 0.28 Note 1: Effective sectional area S and sonic conductance C are converted as S 5.0 x C. Note 2: Flow characteristics are values for port size Rc/8.

Reduced wiring specifications Type Descriptions T10 T0 Connector Common gland M screw type - B MW4G Z 4-T1//6 Series Reduced wiring manifold base side porting and back porting D sub-connector MIL standards D sub-connector 25 pin Serial transmission slave unit specifications (refer to page 49 for the applicable PLC table) Descriptions T6D1 (R) Note 1 T6G1 (R) T6A1 (R) T6J1 (R) T6C1 (R) Network name DeviceNet CC-Link ver1.10 UNIWIRE SYSTEM UNIWIRE H system CompoBus/S Unit side 24 VDC ±10% 24 VDC 24 VDC ±10% Power voltage Valve side 24 VDC + 10%, -5% + 10%-5% (power supply terminal common) 24 VDC + 10%, -5% Unit side Current consumption 100mA or less (Output when all points ON) 200mA or less Output when all points ON 150mA or less Output when all points ON Valve side 15mA or less (when all points OFF) (Current consumption of body is not included) (Current consumption of body is not included) 15mA or less (when all points OFF) Note 1: Consult with CKD for EDS file. (EDS file: A text file of parameters for communicating with host system of various manufacturers) 60mA or less (Output when all points ON) Output no. 16 points 16 points 16 points 16 points 16 points Coolant proof specifications Select option "A" in (G), (F) in "How to Order" on pages 15 and 16 14

B MW4G Z 4-T1/ Series Reduced wiring manifold: base side porting and back porting How to order Manifold model no. MW4GB4 8 0 10 T10 W M 6 MW4GZ4 Discrete valve block with solenoid valve NW4GB4 NW4GZ4 Discrete solenoid valve W4GB4 A Model no. 8 0 08 T10R W M 6 1 0 10 1 M7 1 1 0 08N 1 M7 4 1 B Solenoid position 9 00 M C Port size D Electric connection E Wiring method F Terminal and connector pin array B Solenoid position 1 2-position single solenoid 2 2-position double solenoid -position all ports closed 4 -position ABR connection 5 -position PAB connection 8 Mix manifold C port size {2 (B), 4 (A) port} 08 Rc1/4 10 Rc/8 08G G1/4 10G G/8 08N 10N C8 C10 C12 CX HX NPT1/4 NPT/8 ø8 push-in ø10 push-in ø12 push-in Push-in joint mix Screw-in mix D Electric connection Blank Reduced wiring DC specifications 1 Common gland AC specifications for 1 to 6th station 2 Common gland AC specifications for 7 to 12th station Common gland AC specifications for 1 to 16th station A Model no. Discrete valve block Discrete Manifold with solenoid valve E Wiring method (light and surge suppressor provided as standard) Blank Discrete Note 1 T10 T10R T0 T0R Common gland D sub-connector Left Right Left Right F Terminal and connector pin array Blank Standard wiring Note 2 W Double wiring Note 2 solenoid valvemw4gmw4gnw4gnw4gw4gb4symbol Descriptions B4Z4B4Z415 Note on selection guide Fill out "manifold specification sheet". Note 1: W4GB4*9: plug-in connector NW4G*4*0: electric wire for relay (AC) Connector for relay (DC) Note 2: Standard wiring Wired based on the installed valve. Double wiring Double-solenoid wiring used regardless of installed valve. Note : Do not select M or M7 with locking/non-locking common type manual override. Note 4: Both a lock device with non-locking manual override and pilot air OFF function are provided. Nonlocking/locking common type manual over drive can not be selected with lock device with OFF function. Note 5: Specify the spacer mounting location and quantity in manifold specifications. Refer to a 7 page for the details. Note 6: The stacked assembly of the spacer is available as a special order. Note 7: Common for internal and external pilot. Note 8: The maximum number of MF stations is 16 with standard wiring and 8 with double wiring. G Option H Station number I Voltage G Option Blank No option Note (Non-locking/locking common type manual override if M or M7 is not selected.) M Non-locking manual override (standard) M7 Lock with pilot air OFF Note 4 Z1 Air supply spacer Note 5 Z Exhaust spacer Note 5 Z7 Spacer type regulator Note 6 K External pilot Note 7 Note 7 Note 7 A Coolant proof F A/port B filter H Station number 1 1 station to to Note 8 Note 8 16 16 station I Voltage 1 100 VAC 24 VDC 4 12 VDC 5 110 VAC section indicates "not available".

MW4GNW4GNW4GW4GB4Symbol Descriptions How to order Manifold model no. MW4GB4 8 0 10 T6G1 W M 6 B MW4G Z 4-T6 Series Reduced wiring manifold: base side porting and back porting Manifold solenoid valvemw4ga Model no. Discrete valve block Discrete with solenoid valve MW4GZ4 Discrete valve block with solenoid valve NW4GB4 NW4GZ4 Discrete solenoid valve W4GB4 A Model no. 8 0 08 T6D1R W M 6 1 0 10 M7 1 0 B Solenoid position 08N C Port size M7 1 9 00 M H Voltage B Solenoid position 1 2-position single solenoid 2 2-position double solenoid -position all ports closed 4 -position ABR connection 5 -position PAB connection 8 Mix manifold C Port size {2 (B), 4 (A) port} 08 Rc1/4 10 Rc/8 08G G1/4 10G G/8 08N NPT1/4 10N NPT/8 C8 ø8 push-in C10 ø10 push-in C12 ø12 push-in CX Push-in joint mix HX Screw-in mix B4Z4B4Z4Note on selection guide Fill out "manifold specification sheet". Note 1: W4GB4*9: Plug-in connector NW4G*4*0: Electric wire for relay (AC) Connector for relay (DC) D Wiring method D Wiring method (light and surge suppressor provided as standard) Blank Discrete Note 1 T6G1 Serial transmission Left T6G1R CC-Link 16 points Right T6J1 Serial transmission Left T6J1R UNIWIRE H 16 points Right T6A1 Serial transmission Left T6A1R UNIWIRE 16 points Right T6D1 Serial transmission Left T6D1R Device Net 16 points Right T6C1 Serial transmission Left T6C1R CompoBus/S 16 points Right Note 2: Standard wiring Wired based on the installed valve. Double wiring Double-solenoid wiring used regardless of installed valve. Note : Do not select M or M7 with locking/non-locking common type manual override. Note 4: Both a lock device with non-locking manual override and pilot air OFF function are provided. Non-locking/ locking common type manual over drive can not be selected with lock device with OFF function. Note 5: Specify the spacer mounting location and quantity in manifold specifications. Refer to page 7 for details. Note 6: The stacked assembly of the spacer is available as a special order. Note 7: Common for internal and external pilot. Note 8: For slave unit (OPP2), standard specifications are different from coolant proof specifications. Option Slave unit guard material Specifications Standard Polycarbonate Spatter proof A Nylon Coolant proof Note 9: The maximum number of MF stations is 16 with standard wiring and 8 with double wiring. Note 10: Only 24VDC setting is available for serial transmission connection specifications. E Terminal and connector pin array F Option G Station number E Terminal and connector pin array Blank Standard wiring Note 2 W Double wiring Note 2 F Option Blank No option Note (Non-locking/locking common type manual override if M or M7 is not selected.) M Non-locking manual override (standard) M7 Lock with pilot air OFF Note 4 Z1 Air supply spacer Note 5 Z Exhaust spacer Note 5 Z7 Spacer type regulator Note 6 K External pilot Note 7 Note 7 Note 7 A Coolant proof Note 8 F A/port B filter G Station number 1 1 station to to Note 9 Note 9 16 16 stations H Voltage 24 VDC Note 10 section indicates "not available". 16

B MW4G Z 4-T1//6 Series Reduced wiring manifold: base side porting and back porting Manifold components explanation and parts list Valve set screw 5 Gasket Tie rod set screw The configuration shown below applies for the AC type. 6 Tie rod The drawing is for gland type. 2 4 1 Gasket Main parts list (refer to page 27 8 for details.) No. Component name Model no. (example) No. Component name Model no. (example) 1 End block L NW4G4-EL 4 Discrete valve block with solenoid valve NW4GB410-10-M- 2 Wiring block NW4G4-T10 5 Discrete solenoid valve W4GB419-00-M- Discrete valve block NW4GB4-V1-10 6 End block R NW4G4-ER Component weight (DC specifications) Block type Weight Block type Weight End block NW4G4-EL 16 Discrete valve block with masking plate NW4GB4-MPD-10 60 NW4G4-ER 08 NW4GZ4-MPD-08 9 Discrete valve block with solenoid valve NW4GB410-10-M- 527 Wiring block NW4G4-T10 550 NW4GB420-10-M- 57 NW4G4-T0 905 NW4GB40-10-M- 605 NW4G4-T6G1 710 NW4GZ410-08-M- 560 Tie rod W4G4-TR-V1 (2 pc. per set) 16 NW4GZ420-08-M- 606 W4G4-TR-V2 (2 pc. per set) 6 NW4GZ40-08-M- 68 Tie rod set screw (2 pc.) 16 (g) 17

Repair parts and related parts list No. Parts name Model no. - Cartridge type ø8 straight 4G4-JOINT-C8 push-in joint and ø10 straight 4G4-JOINT-C10 related parts ø12 straight 4G4-JOINT-C12 Blanking plug For ø8: GWP10-B, for ø10: GWP8-B, for ø12: GWP12-B B MW4G Z 4-T1//6 Series Reduced wiring manifold: base side porting and back porting Kit for wiring block T10 Cable clamp Model no. Applicable cable outer diameter Descriptions W4G-SCL-18A ø14.5 to 16.5 This is used to protect cable from W4G-SCL-18B ø16.5 to 18.5 dust and jet. Kit for wiring block T6* Cable clamp Model no. Applicable cable outer diameter Descriptions W4G-OA-W1608C1 ø6 to 8 This is used to protect cable from dust and jet. G/4 Gasket 6 G1/2 Gasket 21 8 max29.5 max40 Applicable cable outer diameter Applicable cable outer diameter (Reference value) Body tightening torque : 4.0 to 4.5N m Cable clamp tightening torque:.0 to.5n m Applicable cable outer diameter: ø6 to ø8 (Reference value) Body tightening torque : 2.0 to 2.4N m Cable clamp tightening torque : 0.5 to 0.7N m 18

B MW4G Z 4-T1//6 Series Reduced wiring manifold: base side porting and back porting Dimensions MW4GB4 Side porting Common gland (T10) Left L2= (25 n) + (25 l) +126 14 106 6.5 9 L1= (25 n) + (25 l) +11 (n: valve block no. l : partition block no.) 88 25 25 4-R4.5 (Mounting hole) Manual Light Controls Indicator 25 8 122.5 (single solenoid) 14 (double solenoid) 152 (-position) 122 40.6 18.6 6-Rc1/2 5 (R1), 1 (P), (R2) port 21 21 7.6 48 65 10 2-Rc1/8 82/84 (PR) Port 20. 2-G/4 Wiring outlet (1 plug attached) For K (external pilot) 2-Rc1/8 12/14 (PA) port Non-locking/locking common type manual overdrive (blank) Push-in joint for valve block ø8 (C8) ø10 (C10) ø12 (C12) MW4GZ4 Back porting Common gland (T10) Left 94 2n-Rc1/4, Rc/8 4 (A), 2 (B) port 24 5 59 17 27.6 10.5 14.5 110.5 81 4.5 100.5 2n-Rc1/4, Rc/8, C8, C10, C12 4 (A), 2 (B) port 15 21 2 76 19