9mm Size Multi-ganged / Other Specifications In addition to the products listed, we can accommodate the follow specifications. Total esistance Variety (kω) 0 0 esistance Taper esistance taper 1 1 3 1C otary Notes Can be fitted with center-taps. Dimensions of Terminal 9. 1 2 3 3. H 4. Outline drawing without tap 9. 6.7 1 2 3 4 3. H 4. Outline drawing with tap Mounting height (H): 6.mm (mm and12.mm also available upon request.) For single-unit type with tap is only available with H=6.mm. Tap is on the terminal 3 side only. 0.3 1.1 0.74 1.3 0.67 Detail of 2 terminal belong part Dimensions of ushings ushing M6 M7 M9 Dimensions ing pplications For single-shaft only For single and dual-shaft For dual-shaft only Single-shaft Dimension Flat type Style ( diameter: φ6) L 1 L 1 7 7 12() 2 12 12 Models in parenthesis apply to those with a push-on switch and those with a push-on, pushoff switch. Style ( diameter: φ3.) L 1 L 1 7 7 12() 2 12 12 Models in parenthesis apply to those with a push-on switch and those with a push-on, pushoff switch. efer to P.336 for ordering products not listed. 332
9mm Size Multi-ganged / Other Specifications In addition to the products listed, we can accommodate the follow specifications. Dimension of Dual-shaft Flat type for inner shaft, slotted type for outer shaft Style (Inner-shaft: φ6 Outer-shaft: φ) Style (Inner-shaft: φ3. Outer-shaft: φ6) L 1 L 2 L 1 2 2 3 1 2 7 4 otary L 1 L 2 L 1 2 2 1 7 4 3 2 pplications oth switchless and rotary switch models are available. Dimensions of with Push-lock Mechanism/Switch L 1 L 2 (.7) 4. (.7) 7 3 (1.7) 12 Dimensions in unlocked state ing Example of uses Note Marked are specifications recommended by lps. 333
9mm Size Multi-ganged / Switch Specifications Switch type Contact arrangement otary switch Push-on push-off switch Momentary push switch 1211 2412 4211 4611 222 Single pole and single throw Single pole and single throw Single pole and single throw Double pole and double throw Travel 0 m a x. 1.±0.mm +0.7 0. 0.3 mm 1.±0.mm ±0.mm Changeover force 0mN m max. 12±N +4 4 2 N ±2N N max. otary Electrical performance life under load ating Contact resistance Insulation resistance Voltage proof 3 16V DC (m 16V DC min. ratings),000 cycles,000 cycles,000 cycles 3 16V DC (m 16V DC min. ratings) 0. 12V DC (m 12V DC min. ratings) 0mΩ max. for initial period, 0mΩ max. after operating life. 0MΩ min. V DC 0V C for 1 minute 0.3 12V DC 9mm Size Multi-ganged / ttached Parts The following parts are included with the product. Nut Washer 2 0. ing 0.7 earing screw Dimension diameter M6 M6 M7 11 M7 M9 11 M9 earing screw Dimension diameter M6 φ φ6.2 M7 φ12 φ7.2 M9 φ14 φ9.1 334
9mm Size Multi-ganged / Configuration Chart ushing Outer-shaft control section Inner-shaft actuator Outer-shaft variety Single-unit Dual-unit Tone/Prefader otary Single-unit Dual-unit Vol./Tone Inner-shaft variety otary switch With switch Push-on push-off switch Momentary push switch 0.mm travel 1.mm travel ttached mechanisms Push-lock mechanism ing Note The single-shaft type product lineups are the same as those in the inner-shaft variety. 33
9mm Size Multi-ganged / Ordering Products Not Listed When ordering product varieties that are not listed, specify referring to the examples below. Sample Part Number K 0 9 7 1 1 1 0 F 1 C 0 1 0 3 Model type otary Model type 111 Single-shaft single-unit 121 Single-shaft dual-unit for tone 122 Single-shaft dual-unit for vol. Switch specifications Switch specifications 0 Without switch 1 2 With rotary switch With push-on push-off switch 4 With momentary push switch (0.mm travel) T U With push-lock mechanism * Push on switch 1.mm stroke is individually specified. type F type Flat (shaft diameter : 6) * diameter 3. is individually specified. Length of the shaft L1 (mm) 1 Length of the shaft 1 2 Length of the shaft 2 ing C0 Without 11 11 C1 Center 31 31 * With rotary switch; for applications in types other than push-lock mechanism. esistance taper esistance taper 1 1 V C esistance taper 3 1C * The resistance taper for rotary switches are individually defined. : For tone & general (model type : 111, 121) V: For vol. (model type : 111, 122) J 0 (%) Output volt.across term.1-2 Input volt. across term. 1-3 0 0 0 (1) V(vol.control)(3) (1) 0 (%) J Output volt.across term.2-3 Input volt. across term. 1-3 0 0 0 C(1C) 0 0 0 0 0 0 0 0 Term."1" otation travel (%) J Term."3" Term."1" otation travel (%) J Term."3" 3 3 (k Ω) 03 4 (k Ω) 0 0 Notes 1. Marked are specifications recommended by lps. 2. The above specification is only applicable to the one-shaft single-unit model and dual-unit ganged model. 336