GF Sentry Series Infra-Red Salamander Broilers Parts List Models GFIR36C GFIR36 GFIR8 GFIR60 Document Number: G_GMD_PL_IRBROILER_GFIR (Rev 5 Updated 07/6)
Rating Plate Location Remove the drip tray to view the rating plate. Serial Number Explained (3-Digits, Year/Month Information) 0 05 00 00668 Sequential Number Factory Code Month Year Page
GF Sentry Series Infra-Red Salamander Broiler Contents: Rating Plate Location / Serial Number Explained (Year/Month Information)......... Components..................................................................... Rear Panel for 36in Model........................................................ 7 Rear Panel for 8in Model........................................................ 8 Rear Panel for 60in Model........................................................ 9 Optional Inter-Connect Gas Kit.................................................. 0 Revision History................................................................. Page 3
COMPONENTS 56 57 3 3 3 5 6 7 36A 5 55 36 39 33 9 8 37 57 38 3 5 0 0 35 6 7 58 8 7 3 9 5 5 53 5 3 0 8 9 5 9 30 6 3 5 7 8 30A GF Series Page
ITEM PART # DESCRIPTION MODEL 36 36C 8 60 G0377--9 Main Top Back G0376--9 Main Top Centre 3 G0375--9 Main Top Front 5700 MSR Burner (Required for North America / Export Models) CK7 SRC Burner Assembly (Required for Australia / CE Models) 5 5600 Flue Back 6 G037--6 Orifice Fitting Cover 7 G07- Front Bearing 8 F Washer Bearing 59798 Valve Housing Assy LH 9 59799 Valve Housing Assy RH 0 57600 Valve Housing Retainer 5998 Manifold Housing Bottom LH 5999 Manifold Housing Bottom RH 50800 Bottom Cover Used for GFIR36C Models ONLY 3 58000 Front Brace 0300 Cnt. Sunk /8 NPT Hex Plug 5 G05- Pressure Test Spigot 3 3 3 3 6 5799 Manifold Assembly 7 G077-9 Nipple / NPT x 8 Long 8 567999 Sub-Manifold Assembly 9 G07- Elbow - / NPT 0 G077-0 Nipple / NPT x -/ Long 59300 Front Frame CK5770 GFIR Series Salamander Knob Assembly C 3 56039 GFIR Salamander Handle 50 Door Handle End (Universal Left/Right Hand) 5 507 Door Handle End Insulator (Universal Left/Right Hand) 6 59600 Rack Veneer 7 60300 Grease Tray 8 50700 Grease Tray Front 9 G0- Large Roller Bearing 30 593099 Rack Frame & Grease Chute Assembly 30A* 5069 Rack (Double Sided - Half Round/Diamond) 3 G07-3 Rear Bushing G069-0-8 Roller Guide Assembly R/H 3 G069-0-8 Roller Guide Assembly L/H 33 G077- Nipple / NPT x -/8 Long 5678 Cover Plate 3 5678 Cover Plate AGA 35 597 Nameplate Large- GARLAND 36 G067-5 Pilot Burner C G067- Pilot Orifice Fitting - Natural Gas C 36A G067-3 Pilot Orifice Fitting - Propane Gas C 37 G069--6 Pilot Bracket * NOT ILLUSTRATED RECOMMENDED STOCK PARTS Note: Propane option has been discontinued since September, 03. CRITICAL Page 5
ITEM PART # DESCRIPTION MODEL 36 36C 8 60 G0-8 Orifice Fitting #8 Natural (North America) C G0- Orifice Fitting Propane.MM (North America ) C Orifice Fitting -.6MM Natural (CE) C Orifice Fitting -.MM Propane (CE) C 38 Orifice Fitting -.MM Natural Gas (AUSTRALIA) C G0-XX Orifice Fitting -.MM Propane Gas (AUSTRALIA) C Orifice Fitting -.7MM Natural Gas (EXPORT) C Orifice Fitting -.MM Propane Gas (EXPORT) C 39 56785 Side Liner - Right Hand 56786 Side Liner - Left Hand 0 56730 Main Side R/H (S/S) 567303 Main Side L/H (S/S) G076- Tee / NPT G0989--8 Post Bearing / Dia x / Long 7500 Regulator 3/" Propane Gas 0IN W/C (North America/Export) C 750 Regulator 3/" Natural Gas.0IN W/C (North America/Export) C 3 - Regulator 3/" ISO Natural Gas.5IN W/C - (CE/AUSTRALIA) (Not supplied) - Regulator 3/" ISO Propane Gas 0IN W/C - (CE/AUSTRALIA) (Not supplied) 6000 Heat Shield Front S/S 5 600 Heat Shield Bottom S/S 7 5706 7/6 Dia Tubing Valve - Orifice Left (Used UP TO June, 06) 5000 7/6 Tubing Valve - Orifice Left (Used FROM June 5, 06) 8 60578 Flame Failure Valve C 9 980 Valve Connector Fitting 0mm C 5 5000 Valve Extension Block 5 G0367-3 Valve-Pilot / 90º 53 G03- Fitting 7-6 CC x / NPT C 5 5706 7/6 x 6 Dia Tubing Valve - Orifice Right (Used UP TO June, 06) 500 7/6 Tubing Valve - Orifice Right (Used FROM June 5, 06) 55 578 / Dia Tubing Pilot - Flame Failure Right (Used UP TO June, 06) 536000 / Tubing Pilot FF Valve RT (Used FROM June 5, 06) 56 390 Thermocouple 3 / C 57 550 M8 X Brass Nut - Thermocouple C 57 56780 Thermocouple Support Bracket - Left / Right 58 578 / x 8 Dia Tubing Pilot - Flame Failure Left (Used UP TO June, 06) 60 / Tubing Pilot - Flame Failure Left Salamander (Used FROM June 5, 06) * NOT ILLUSTRATED RECOMMENDED STOCK PARTS Note: Propane option has been discontinued since September, 03. CRITICAL Page 6
Range Mount Components to Install Salamander 36 Model 3 5 6 36 Rear Panel ITEM PART# DESCRIPTION QTY 55983 GFIR 36" Standard Back 55976 GFIR 36" Standard Back - S/S 55957 Upright Veneer Salamander - S/S 3 5593 Upright GF Series Salamander - GALVANIZED 536 Salamander Support Left Hand - GALVANIZED 5 537 Salamander Support Right Hand - GALVANIZED 6 530 36" High Shelf Front Panel - S/S * NOT ILLUSTRATED RECOMMENDED STOCK PARTS Page 7
Range Mount Components to Install Salamander 8 Model 0 3 6 5 7 8 Rear Panel ITEM PART# DESCRIPTION QTY 0 55966 Rear Panel GFIR8 - GALVANIZED 55996 GFIR 36" S/S Back 5055 8" Salamander Anti-Sway Bracket 5596 Upright Right Hand GFIR8 - GALVANIZED 3 55963 Upright Left Hand GFIR8 - GALVANIZED 55965 Centre Support GFIR8 - GALVANIZED 5 536 Salamander Support Left Hand - GALVANIZED 6 537 Salamander Support Right Hand - GALVANIZED 7 5596 Front Panel GFIR8 - S/S * NOT ILLUSTRATED RECOMMENDED STOCK PARTS Page 8
Range Mount Components to Install Salamander 60 Model 0 7 3 8 5 6 9 60 Rear Panel ITEM PART# DESCRIPTION 0 539 IN High Shelf Salamander Back Standard - GALVANIZED 5395 IN High Shelf Salamander Back - S/S 55983 GFIR 36" Series Back - GALVANIZED 55976 GFIR 36" Series Back S/S 53 Upright High Shelf - GALVANIZED 3 5393 " SHELF S/S 536 Salamander Support Left Hand - GALVANIZED 5 537 Salamander Support Right Hand - GALVANIZED 6 538 Salamander/High Shelf Support Bracket - Salamander Left Hand 7 55957 Upright Veneer Salamander - S/S 8 5593 Upright GF Series Salamander - GALVANIZED 5365 60" HIGH SHELF FRONT PANEL SALAMANDER LEFT HAND - S/S 53900 60" HIGH SHELF FRONT PANEL SALAMANDER RIGHT HAND - S/S 9 60" BROILER/GRIDDLE FRONT PANEL SALAMANDER LEFT HAND - 5390 S/S * NOT ILLUSTRATED RECOMMENDED STOCK PARTS Page 9
OPTIONAL INTER-CONNECT GAS KIT FOR 36 RANGE The gas supply of the range mounted salamanders may be inter-connected with the supply of the range, so both units are supplied from a single gas connection. The supply gas piping should be a minimum of (5mm) diameter to ensure enough gas capacity is available at the specified pressure to supply the total combined input rating of both appliances. The components comprising the optional inter-connect kit are shown below. Optional Interconnect Gas Kit #53606 - Version, Connecting to a 36in Range 5 CUT TUBING (ITEM 5-53608) TO SIZE AS REQUIRED TO SUIT SALAMANDER/CHEESEMELTER TOP OR REAR MANIFOLD INLET CONNECTION 8 TO INLET OF SALAMANDER/ CHEESEMELTER MANIFOLD REGULATOR - 6.0"w.c. NATURAL GAS OR 0.0"w.c. PROPANE GAS (SUPPLIED WITH SALAMANDER/ CHEESEMELTER) 5 5 3 SUPPLIED WITH RANGE 3 REGULATOR -.5" w.c. NATURAL GAS ATTACH SUPPORT CLAMP (ITEM 7-60800) OR 0.0" w.c. PROPANE GAS TO SUPPORT BRACKET ( ITEM 6-60700) (SUPPLIED WITH RANGE) WITH ()#0- SELF-TAPPING SCREWS (ITEM F3 - NOT SHOWN) PROVIDED. SUPPLIED WITH RANGE TO INLET OF RANGE MANIFOLD MARK HOLE LOCATIONS AND MOUNT SUPPORT BRACKET (ITEM 6-60700) TO RANGE BACK WITH ()#0-6 TEKS SELF-DRILL/TAP SCREWS (ITEM - F67 - NOT SHOWN) PROVIDED. 9 7 6 3 0 " NPT GAS SUPPLY CONNECTION ITEM PART# DESCRIPTION QUANTITY 36 750.5 W.C 3/ NPT, REGULATOR NATURAL GAS, SUPPLIED WITH RANGE 5507 3/ ISO 7-, REGULATOR NATURAL GAS, SUPPLIED WITH RANGE 7500 0 W.C 3/ NPT, REGULATOR PROPANE GAS, SUPPLIED WITH RANGE 5508 3/ ISO 7-, REGULATOR PROPANE GAS, SUPPLIED WITH RANGE G0738- NIPPLE, 3/ NPT X / (ONE SUPPLIED WITH RANGE) 3 3 G07-5 ELBOW, 90DEG, 3/ NPT (ONE SUPPLIED WITH RANGE) G0963- UNION, 3/ NPT 5 30300 3/ CC X 3/ NPT STRAIGHT FITTING 6 60700 BRACKET, PIPE SUPPORT 7 60800 CLAMP, PIPE SUPPORT BRACKET 8 G07-9 REDUCING ELBOW, 90DEG, 3/ NPT X / NPT 9 G0738-5 NIPPLE, 3/ NPT X 6.5 0 G0376- REDUCING TEE, 3/ NPT X 3/ NPT X F67 SCREW, #0-6 X / HEX, WASHER HEAD, TEKS SELF-DRILL/TAP (NOT SHOWN) F3 SCREW, #0- X / PAN HEAD, SELF-TAP, TYPE F (NOT SHOWN) 3 7503 6 W.C 3/ NPT, REGULATOR NATURAL GAS, SUPPLIED WITH SALAMANDER/ CHEESEMELTER 7500 0 W.C 3/ NPT, REGULATOR PROPANE GAS, SUPPLIED WITH SALAMANDER/ CHEESEMELTER G738- NIPPLE, 3/ NPT X 3.5 5 53608 TUBING 3/ Page 0
OPTIONAL INTER-CONNECT GAS KIT FOR 8 /60 RANGE Optional Interconnect Gas Kit #53606 - Version, Connecting to a 8in or 60in Range NOTE: CUT TUBING (ITEM 8-53608) TO SIZE AS REQUIRED TO SUIT SALAMANDER/CHEESEMELTER TOP OR REAR MANIFOLD INLET CONNECTION TO INLET OF SALAMANDER/ CHEESEMELTER MANIFOLD FOR LEFT-MOUNTED SALAMANDER/CHEESEMELTER SUBSTITUTE COMPONENTS SHOWN FOR ITEM 7 CIRCLED IN ADJACENT VIEW 6 7 8 7 3 REGULATOR - 6.0"w.c. NATURAL GAS OR 0.0"w.c. PROPANE GAS (SUPPLIED WITH SALAMANDER/CHEESEMELTER) 0 TO INTER-CONNECT TUBING ( ITEM 8-53608) 7 ATTACH SUPPORT CLAMP (ITEM 0-60800) TO SUPPORT BRACKET (ITEM 9-5360) WITH () #0- SELF-TAPPING SCREWS (ITEM F3 - NOT SHOWN) PROVIDED 6 7 SUPPLIED WITH RANGE SUPPLIED WITH RANGE TO INLET OF RANGE MANIFOLD 6 9 MARK HOLE LOCATIONS AND MOUNT SUPPORT BRACKET (ITEM 9-5360 ) TO RANGE BACK WITH () #0-6 TEKS SELF-DRILL/TAP SCREWS (ITEM - F67 - NOT SHOWN) PROVIDED. 3 TO OUTLET OF SALAMANDER/ CHEESEMELTER REGULATOR REGULATOR -.5"w.c. NATURAL GAS OR 0.0"w.c. PROPANE GAS (SUPPLIED WITH RANGE) 5 6 5 8 ATTACH SUPPORT CLAMP (ITEM 0-60800) TO SUPPORT BRACKET (ITEM 9-5360) WITH () #0- SELF-TAPPING SCREWS (ITEM F3 - NOT SHOWN) PROVIDED MARK HOLE LOCATIONS AND MOUNT SUPPORT BRACKET (ITEM 9-5360) TO BACK WITH () #0-6 TEKS SELF-DRILL/TAP SCREWS (ITEM - F67 - NOT SHOWN) PROVIDED. 9 0 " NPT GAS SUPPLY CONNECTION QUANTITY ITEM PART# DESCRIPTION 8 / 60 F3 SCREW, #0- X / PAN HEAD, SELF-TAP, TYPE F (NOT SHOWN) 5.5 W.C NPT, REGULATOR NATURAL GAS, SUPPLIED WITH RANGE 5509 ISO 7-, REGULATOR NATURAL GAS, SUPPLIED WITH RANGE 5 0 W.C NPT, REGULATOR PROPANE GAS, SUPPLIED WITH RANGE 55050 ISO 7-, REGULATOR PROPANE GAS, SUPPLIED WITH RANGE 3 7503 6 W.C 3/ NPT, REGULATOR NATURAL GAS, SUPPLIED WITH SALAMANDER/ CHEESEMELTER 7500 0 W.C 3/ NPT, REGULATOR PROPANE GAS, SUPPLIED WITH SALAMANDER/ CHEESEMELTER 07609-0 NIPPLE, NPT X (ONE SUPPLIED WITH RANGE) 3 5 G738-5 NIPPLE, 3/ NPT X 6.5 6 G07-5 ELBOW, 90DEG, 3/ NPT 3 7 07609-7 ELBOW, 90DEG, NPT (SUPPLIED WITH RANGE) 8 53089 UNION, NPT 9 5360 BRACKET, PIPE SUPPORT 8/60 0 60800 CLAMP, PIPE SUPPORT BRACKET 30800 REDUCING TEE, NPT X NPT X 3/ G0738-6 NIPPLE, 3/ NPT X.75 3 G0738- NIPPLE, 3/ NPT X F67 SCREW, #0-6 X / HEX, WASHER HEAD, TEKS SELF-DRILL/TAP (NOT SHOWN) 5 G0738- NIPPLE, 3/ NPT X 3.5 6 G07-9 REDUCING ELBOW, 90DEG, 3/ NPT X / NPT 7 303000 3/ CC X 3/ NPT STRAIGHT FITTING 8 53608 TUBING 3/ Page
REVISION HISTORY (GFIR) REV BY PAGE/ITEM NOTES DATE 0 CM NEW BOOK - MODEL: GFIR SERIES INFRA-RED SALAMANDER BROILER MAY 0/0 CM,3 FIXED FRONT PAGE MODELS NAME OCT 6/0 p. Added serial# info, rating plate loc. pp.7-8 New gas interconnect kits PCO 06579/0703 MAY 08/ HH pp.-6 # #6, 8, 38, 39,, 3, 7, 5, 55, 57, 58 New part numbers. MAY 3/ p.5 #6 Incorrect P/N. Should be G037--6. p.5 #9 59799, qty=, all models (was 0) 3 HH p.5 #3 Added 5678. Used on units for Australia. p.6 #3 750 Regulator, pressure should be.0 WC. DEC 8/5 p.5, 6 Added Note: Propane option has been discontinued since September, 03. Ref: Bulletin GAR_SB_0008 (Nov, 05) HH p.6 #8 New FF valve, direct replacement. Was 0099. ECO-00037G p.6 #38 Corrected P/N and descriptions. APR 7/6 5 HH p.6 #7, 5, 55, 58 Added new solid tubing ECO-000766C JUL 5/6 Page
KitchenCare -8-7-CARE www.mtwkitchencare.com