FLOW CONTROL OPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM World Valve Wouter Witzel 1
FLOW CONTROL l PRODUCTS CONTENT: FLOW CONTROL 4-5 BUTTERFLY VALVES 6-7 BALL VALVES 8 GATE- AND GLOBE VALVES 9 KNIFE GATE VALVES 10-11 DAMPERS 13 ACTUATED VALVES, SWITCH BOXES & ACCESSORIES 14-15 CHECK VALVES 16 STEAM TEMPERATURE CONTROL 17 FIRE FIGHTING 18-19 FIRE FIGHTING ACCESSORIES 20 FLOW CONTROL SEGMENTS 22-23 2 3
FLOW CONTROL l PRODUCTS FLOW CONTROL OPTIMAL VALVE SOLUTIONS FLOW CONTROL DELIVERS ADVANCED VALVE SOLUTIONS BASED ON APPLICATION KNOWLEDGE AND UNDERSTANDING, COMPETENT LOCAL SUPPORT AND INTERNATIONAL COORDINATION. BACKED UP BY THE LEADING COMPANIES AND MANUFACTURERS OF INDUSTRIAL VALVES, YOU CAN EXPECT HIGH AND CONSISTENT QUALITY AND SERVICE 01 02 03 EXPECT APPLICATION KNOWLEDGE AND UNDERSTANDING EXPECT COMPETENT LOCAL SUPPORT EXPECT INTERNATIONAL COORDINATION 4 5
FLOW CONTROL l PRODUCTS BUTTERFLY VALVES Wouter Witzel WOUTER WITZEL EV TYPE Rubberlined vulcanised butterfly valves. Complete range of butterfly valves in wafer, semi-lug, tapped-lug, u-section, single flange and double flange. Electric and Pneumatic Actuation DN50 DN2200 Up to 25 Bar Up to +200 C Wouter Witzel SERIES DYNAXE High performance butterfly valve Double eccentric Carbon Steel or Stainless Steel body Carbon Steel disc or Stainless Steel disc Metal or PTFE seat Firesafe and anti-static Wafer or double flangedbody DN50 DN900 Maximum 50 bar -29 C to +540 C HIGH PERFORMANCE BUTTERFLY VALVE Wafer and Lugged Versions. Various Body and Disc Materials available Electric and Pneumatic Actuation Up to DN800 PN10, 16, 25 or 40 Up to +200 C TRIPLE OFFSET METAL TO METAL SEAT BUTTERFLY VALVE Body types: Wafer, lug and flange type. Various Body and Disc Materials available Electric and Pneumatic Actuation DN80 DN1400 Max. working pressure 50 bar (up to 100 bar) Up to +700 C World Valve DOUBLE ECCENTRIC HIGH PERFOR- MANCE. SERIES NUMBER. Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, mono flanged and double flanged design. Up to DN1200 Full vacuum to 25 Bar -50 to +230 C World Valve RUBBER LINED CENTRIC. SERIES NUMBER. Vulcanised Butterfly Valve. Wafer/Lugged/Double. Flanged. Rubber lined Available in various materials Quick delivery times available Up to DN2000 Full vacuum to 20 Bar -30 to +200 C SERIES 756/XX FLANGED DOUBLE ECCENTRIC Body and disc in ductile iron. Shaft, and pins in stainless steel. Fusion bonded epoxy coating acc to GSK. Stainless steel seat IP 68 gearbox DN200 - DN2800 PN10/16 & PN25 INTERAPP DESPONIA LUGGED TYPE Stainless Steel disc. Loose liner Other seat and disc material available Manual, Electric and Pneumatic Actuator PN 20 rating available DN25 DN600 Up to 20 Bar -40 to +200 C INTERAPP BIANCA WAFERTYPE Bianca - Butterfly valve: Food approved, FDA, EU1935/2004. DN32- DN900 PN10, PN16, ANSI cl. 150-20 C 200 C according to working conditions, other temperatures on request 6 7
FLOW CONTROL l PRODUCTS BALL VALVES GATE- AND GLOBE VALVES FLANGE BALL VALVE Stainless steel ball valve PN16/40 with flanged ends and two-piece body, full bore. Mounting flange for actuators according to ISO 5211. Antistatic execution Manual, Electric and Pneumatic Actuator DN15 DN100 Up to 63 Bar Up to +650 C BVE22 BVA 22 Ball valve (stainless steel) BVE23 Prepared for actuator DN10 DN100 PN63-20 C to +200 C TECGATE SHUT-OFF VALVE Shut-off valve fully welded design with internal spindle. Due to the use of a back seal for the spindle, the packing seals can be replaced during operation. DN80 DN400 PN16 PN100-1 TECSLIDE FLAT PLATE GATE VALVE Shut-off valve with a three-part modular design. The slider plate is moved over a rising spindle. Flange to DIN or ANSI DN50 to DN1200 DN10 DN40 Up to +550 C 3-WAY BALL VALVE (brass, nickel plated) suitable for applications with hot and cold water, compressed air, oils, hydrocarbons and non-corrosive fluids. 3-way brass ball valve, full bore, top flange for mounting of actuator DN15 DN50 PN25 0 C to +150 C VARITEC HIGH PRESSURE BALL VALVE SOFT AND METAL SEATED. Soft and metal seated. On/off and control function. Custom made. Alternative: Ceramic parts. Tungsten carbide coating, On/off and control function. DN25 DN1400 / DN25 DN250/DN1000 From 16 to 400 Bar / From 16 to 420 Bar -196 C to +550 C SERIES 06/30 Resilient seated gate valve. Face to face. Body and bonnet in ductile iron. Operated with handwheel handwheel/ gearbox or actuator Stem in stainless steel Wedge in NBR rubber Replaceable stem sealing (up to DN500) DN40-600 and DN800 (OPTION: DN50 - DN300 PN25) Up to 16 Bar SERIE 15/XX Flanged gate valve prepared for actuator Face to face DIN F4 or DIN F5 (F4) DN40 - DN400 (F5) DN50 - DN500 PN10 16 GATE VALVE Welded ends, flange ends. For water, steam, condensate and gases, Atex, power, chemical applications DN50 DN350 Max 400 Bar Up to +600 C GLOBE VALVES Welded ends, flange ends. For water, steam, condensate and gases, Atex, power, chemical applications DN15 DN125 Max 400 Bar Up to +600 C CONTROL GLOBE VALVE Stop valve designed to open and stop a flow. Can be used as regulating device. For water, steam, condensate and gases. DN10 DN300 Up to 40 Bar Up to +560 C 8 9
FLOW CONTROL l PRODUCTS KNIFE GATE VALVES 10 GENERAL SERVICE KNIFE GATE VALVE Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.). Up to DN1200 10 Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200) -20 to +250 C BIDIRECTIONAL KNIFE GATE VALVE Cast iron or stainless steel body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.). Up to DN1200 10 Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200) -20 to +250 C SLURRY KNIFE GATE VALVE Ductile iron or stainless steel body, stainless steel gate, two rubber sleeves and various actuation solutions (manual, pneumatic, electric, etc.). Up to DN1200 10 Bar (DN600) / 5 Bar (DN1200) -20 to +200 C COAL BURNER LINE KNIFE GATE VALVE (ATEX CAT. I & DIN 14460) Ductile iron split body, stainless steel gate, viton seat and various actuation solutions (manual, pneumatic, electric, etc.). Up to DN1000 2 Bar (10 Bar explosion) -20 to +200 C KNIFE GATE VALVE ACC TO MSS SP-81 Stainless steel monoblock body and gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.). Up to DN900 10 Bar DN600 7 Bar DN900-20 to +250 C BIDIRECTIONAL KNIFE GATE VALVE ACC TO MSS SP-81 Stainless steel body and gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.). Up to DN900 10 Bar DN600 7 Bar DN900-20 to +250 C COAL BURNER LINE KNIFE GATE VALVE (NFPA 85) Full flanged -MSS SP 81 face to facekgv. Ductile iron body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.). Up to DN1200 10 Bar PN600 7 Bar PN900-20º C to +550ºC THROUGH CONDUIT KNIFE GATE VALVE Cast iron or stainless steel split body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.). Up to DN1000 10 Bar (DN125) / 8 Bar (DN250) 6 Bar (DN400) / 5 Bar (DN450) 4 Bar (DN600) / 2 Bar (DN1000) -20º C to +550ºC HOPPER SHAPE KNIFE GATE VALVE Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.). Up to DN600 3 Bar (DN250) / 2 Bar (DN400) 5 Bar (DN600) / 2 Bar (DN1200) -20º C to +550ºC SQUARE PORT FABRICATED KNIFE GATE GALVE Carbon steel or stainless steel body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.). Up to 1200 x 1200 mm 1 Bar -20º C to +550ºC 11
FLOW CONTROL l PRODUCTS DAMPERS BUTTERFLY DAMPER Carbon or stainless steel fabricated body and blade, rigid ledge or flexible seal and various actuation solutions (manual, pneumatic, electric). LOUVER DAMPER Carbon or stainless steel fabricated, parallel or opposed blades, rigid ledge or flexible seal and various actuation solutions (manual, pneumatic, electric). Up to DN3000 Max. 0,5 Bar Up to 10000 x 10000 mm Max. 0,5 Bar T-DUCT DAMPER Carbon or stainless steel fabricated body and blades, rigid ledge or flexible seal and various actuation solutions (manual, pneumatic, electric). GUILLOTINE DAMPER Carbon or stainless steel fabricated body and gate, rigid ledge seal and various actuation solutions (manual, pneumatic, electric). Up to DN3000 Max. 0,5 Bar Up to DN3000 Max. 0,5 Bar STACK DAMPER Carbon or stainless steel fabricated body and blades, rigid ledge or flexible seal and various actuation solutions (pneumatic, electric). Up to DN7000 Max. 0,5 Bar 12 13
FLOW CONTROL l PRODUCTS ACTUATED VALVES, SWITCH BOXES & ACCESSORIES ELECTRIC ACTUATORS Torque range from 50 Nm to 2,400 Nm Swing angles from 75 to 105 Operating time ranges for 90 from 4 s to 100 s Limit and torque seating 3-ph AC and 1-ph AC motors Handwheel for manual operation Mechanical Position indicator ELECTRIC ACTUATORS Torque range - Md =10-20-35-60-100 Nm Limit switches - 4 adjustable limit switches 5A (2x int. + 2x ext.) Heating resistance - ER 10 + 20 7 W, ER 35 + 100 10 W controlled Duty rating - ED = 50% Protection - IP66 Temperature range - -10 C 55 C (Fail Safe: -10 C 40 C) Electronic torque limiter, failure feedback relay ELECTRO-PNEUMATIC POSITIONER 4-20mA input Input and output pressure gauges Aluminium housing Push button programming Plastic or Stainless Steel housing Exd or Exia certification Output signal SOLENOID VALVE 1000 KPA pressure rating Namur mount Aluminium construction 24DC supply 240VAC supply 110VAC supply 24VAC supply Process valves Body materials MANUAL ACTUATOR Handlever Aluminium - Valve size 25-300 Handlever GGG40 - Valve size 50-200 Gearbox Aluminium IP65 Valve size 25-400 Gearbox GG25 IP67 - Valve size 50-1000 Buried Service available AIR TORQUE PNEUMATIC ACTUATORS The rack and pinion pneumatic actuator The design in fully compliance with all the international standards. Double acting and spring return - 6 different protection levels - 3 different working temperature executions (from -55 C up to +150 C) Due to our innovative design features with the latest technology, materials and protection coatings available, our actuator is one of the highest grade pneumatic actuators on the market. SWITCH BOX Aluminium housing ISO 5211 mounting Open/closed indicator 2 x Microswitch output IP67 weather proof 2x 1/2 NPT conduit Cam adjustment Explosion proof housing Plastic housing BALL VALVE PNEUMATIC SINGLE OF DOUBLE ACTING ACTUATOR Ball Valve DN 15-100 2 Piece body Stainless Steel construction Threaded BSP/NPT 14 15 11
FLOW CONTROL l PRODUCTS CHECK VALVES STEAM TEMPERATURE CONTROL SERIES 41/XX Swing check valve. Resilient seated. Free shaft. Ductile iron lever and weight lever and spring DN50 DN600 PN 10 or 16 SERIES 641/12 Recoil Check Valve. Metal seated high performance, fast acting, non slam check valve. DN350 - DN500 10 + 16 + 25 Bar STEAM CONVERSION STATION Steam pressure and temperature control. Safety function acc. to TRD421 DN50 DN2000 25 400 Bar Up to +580 C CHECK VALVE Metal seated check valves. Other PN ratings on request DN32 DN600 Up to 16 Bar -10 to +400 C CHECK VALVE Metal seated check valves. Other PN ratings on request DN32 DN600 Up to 16 Bar -10 to +400 C MOTIVE STEAM NOZZLE Steam temperature control near saturation curve. Custom made DN200 DN2000 Up to 400 Bar CHECK VALVE Metal seated check valves. DN32 DN600 Up to 16 Bar -10 to +400 C Wouter Witzel EUROVALVE CHECK VALVE Flangeless wafer type. Seat bonded to the body EN 1092 PN6 and 16. ASME B16.5 cl. 150. MMS SP 44 cl. 150. Face to face: EN558-1/2 Series 16. DN50 600 Up to 16 Bar -40 to +200 C DESUPERHEATER VALVE Steam temperature control by injecting boiler feed water Control range 1:50 standard Control range 1:2500 HT version DN200 DN1000 25 400 Bar 16 17
FLOW CONTROL l PRODUCTS FIRE FIGHTING SERIES 45/56 OS&Y Body, bonnet, yoke and hand wheel in ductile iron. Stem in copper alloy. Wedge in ductile iron vulcanized with EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by hand wheel. UL/FM approved. Flanged, pushon or mechanical joint ends. DN65 DN300 PN16 SERIES 06/37 With Pin Indicator and handwheel according to AWWA C 606 EPDM rubber wedge Epoxy coated according to DIN 30677-2 and GSK guide lines DN50 DN300 PN16 0 to 70 C SERIES 27/00 Body, upper and lower barrel, monitor elbow in ductile iron. Wedge in ductile iron vulcanized with EPDM rubber. Stem in stainless steel. Stem rod in epoxy coated steel. Fusion bonded epoxy coating acc. to GSK, with UV resistant polyester top coat. UL/FM approved. Monitor flange options: 3-4 Up to DN1200 16.1 Bar SERIES 34/00 Body in ductile iron. Stem in galvanized steel. Fusion bonded epoxy coating acc. to GSK, with UV resistant polyester top coat. DN100-DN400 LANDING VALVES Couplings in gunmetal, bronze, brass or light alloy. DN25 DN15 Up to PN16 Max 120 C SERIES 45/59 Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by stem extension. UL/FM approved. DN100-300: 250 PSI. DN350-400: 200 PSI Flanged, pushon or mechanical joint ends. DN65-DN400 PN16 Up to +70 C SERIES 34/80 wall post indicators are available in three fixed lengths. The handwheel can be locked, and the wall post indicators have a pre-cast threaded boss for mounting a supervisory switch. DN65 DN400 WET BARREL FIRE HYDRANT TO AWWA wet barrel hydrant is designed to be a trouble free, easy to maintain hydrant. Designed so that one person can perform all routine repairs and maintenance. DN150 PN16 SERIES 45/59 NRS Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by stem extension. UL/FM approved. Flanged, pushon or mechanical joint ends. DN50-DN400 PN16 Wouter Witzel SERIES 75/31 Butterfly valve Centric with fixed liner Semi lug Ductile iron VdS approved DN50 DN300 PN10 or PN16 SERIES 27/00 Body, upper and lower barrel in ductile iron. Wedge in ductile iron vulcanized with EPDM rubber. Stem in stainless steel. Stem rod in epoxy coated steel. Fusion bonded epoxy coating acc. to GSK, with UV resistant polyester top coat. Inlet options: 4-6 flanged 4-6 PE End DN150 16.1 16.5 Bar SERIES 06/35 Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by hand wheel. DN50 DN400 PN10 or 16 SERIES 75/41 Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by hand wheel. 18 19 Wouter Witzel DN50 DN300 PN10 or PN16
FLOW CONTROL l PRODUCTS FIRE FIGHTING ACCESSORIES SERIES 04 Key adaptor #23-32, with spindle adaptor fitting to US type wrench nut. Extension Stem. Galvanised Steel inner shaft. PE outer tube 450-5250mm. Fixed or Telescopic. Available in following lengths (in mm): 800 1000 1250 1500 2000 3000 SERIES 04/041 Extension spindle for gate valves Telescopic. Key adaptor #23-32 with spindle adaptor fitting to US type wrench nut DN 40-400 Available in following lengths (in mm): 450-700 650-1100 1050-1700 1700-2900 SERIES 04/74 Universal street cover for telescopic ext. spindle. Can be used as fixed and floating street cover with deflection ability. Body and distance ring of ductile iron, lid of grey cast iron. Lid diameter: 131mm Lid inscription: Fire SERIES 04/15 T-key for gate valves SERIES 854/00 Ball float valve with lever and floating ball. Ductile iron DN50-300 PN16 20 21
FLOW CONTROL l PRODUCTS FLOW CONTROL SEGMENTS AT FLOW CONTROL, WE FOCUS ON FOUR MAIN TARGET SEGMENTS. IN THIS WAY WE ARE ABLE TO HIGHTEN THE QUALITY OF OUR SOLUTIONS, AND BE CLOSER TO OUR CUSTOMERS AT ALL TIMES. OPTIMAL VALVE SOLUTIONS FOR POWER GENERATION OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS OPTIMAL VALVE SOLUTIONS FOR THE MINING INDUSTRY OPTIMAL VALVE SOLUTIONS FOR WATER TREATMENT 22 23
FLOW CONTROL Stein Schierenbeck Product Manager Flow Control Mobile: +47 4143 0452 E-mail: stsc@avk.no Ole Alexander Gloppen Selger / Salgssupport Mobile: +47 9036 2040 E-mail: olgl@avk.no Norge AS Hågasletta 7 3236 Sandefjord Norway www.avk.no Tel.: +47 3348 2999 20