Power Tools. Product Catalogue

Power Tools Product Catalogue

Introduction Power Tools Ramset have 25 years of experience and history in concrete drilling and cutting applications dealing, directly with everyday users. Our high performance range includes, DynaDrill Rotary Hammers, Cordless Tools, Carbide, Diamond Drilling Rigs and Accessories, Angle Grinders, Concrete Chaser and Laser Levels. 1 www.ramset.com.au 1300 780 063

Contents Power Tools Selection Guide 3 Cordless Power Tools 4 Rotary Hammer - 18V Hammer Drill Driver - 18V Drill Driver - 18V Impact Wrench - 18V Impact Driver - 18V Circular Saw - 18V Reciprocating Saw - 18V Torch - 18V Jobsite Radio - 18V Charger & Battery - 18V Caulking Gun - 13.2V Drill Driver - 14.4V Hammer Drill Driver - 14.4V Impact Wrench - 18V Hammer Drill - 24V Accessories - Driver Bits, Hex Sockets & Blades DynaDrill Corded Power Tools 22 DynaDrill 526 - Rotary Hammer DynaDrill 527 - Combi Hammer DynaDrill 532 - Rotary Hammer DynaDrill 544 - Combi Hammer DynaDrill 565 - Combi Hammer DynaDrill 576 - Combi Hammer DynaDrill 665 - Demolition Hammer DynaDrill 610 - Demolition Hammer Accessories - Carbide, Drill Bits, Chisels & Core Bits Diamond Drilling Power Tools 34 Diamond Drilling Motor - RM160 Diamond Drilling Rig - Suits RM160 & RM250 Diamond Drilling Motor - RM350 Diamond Drilling Rig - Suits RM250 & RM350 Diamond Core Bits Wet & Dry Vacuum 30L & 50L Accessories Cutting & Grinding Power Tools 46 Surface Grinder Wall Chaser Angle Grinder - 230mm Accessories - Diamond Blades Laser Devices 52 Rotary Laser Multi-Liner Laser Multi Pointer Laser Cross Beam Laser Distance Meter Accessories www.ramset.com.au 1300 780 063 2

Selection Guide Rotary Hammers Which Ramset Rotary Hammer should I use? Selection Guide Concrete Drilling Concrete Demolition Corded DD526 DD527 DD532 DD544 DD565 DD576 DD665 DD610 Rated Input (watt) 800 800 720 900 1100 1350 1100 1500 Rated Speed (rpm) 0-900 0-900 0-800 0-760 0-400 0-280 - - Impact Rate (bpm) 0-4400 0-4400 0-4800 0-3600 0-3000 0-2800 0-3200 900-1890 Impact Energy (joules) 3.0 3.0 3.3 5 10 15 11 25 Power Source (volt) 240V 240V 240V 240V 240V 240V 240V 240V Weight (kg) 2.7 2.7 3.3 4.7 5.9 7.9 5.9 9.9 Tool Holder SDS Plus SDS Plus R3 Plus SDS Plus SDS Max SDS Max SDS Max SDS Max Suits Tool Drive R3 Plus R3 Plus R3 Plus R3 Plus R3 Max R3 Max R3 Max R3 Max Concrete Drilling Cordless CRH18V DD528-350 0-1200 0-1000 0-4500 0-4000 3.0 1.4 18V Battery 24V Battery 4 3.5 SDS Plus SDS Plus R3 Plus R3 Plus Drilling Range (mm) Concrete 4-26 4-26 5-26 6-32 14-40 14-45 - - Optimum Drilling (mm) 8-16 8-16 10-18 14-25 18-38 24-40 - - Drilling Range (mm) Steel up to 13 up to 13 up to 13 up to 13 - - Timber (mm) 30 30 30 30 - - Core Cutting (mm) 68 68 40-80 68-90 40-125 40-125 - - Chiselling Chiselling Positions 36 12 16 12 16 12 5-24 5-16 6-14 6-10 up to 13 up to 12 28 25 - - Variable Screwdriving Safety Clutch Double Insulated Sealed Lub. System Variable Speed Reversing Switch Impact Resistant Body Mouldings Adjustable Side Handle Service Light Indicator Electronic Monitoring Electro Pneumatic impact mechanism Quick Fit Chuck Optional Optional Optional - - - - Drill Chuck with Adaptor - - - - - - - - Optimum Use Not recommended Optional Optional 3 www.ramset.com.au 1300 780 063

Cordless Power Tools Cordless Power Tools www.ramset.com.au 1300 780 063 4

Rotary Hammer 18V Four Mode Hammer 4 mode setting - drilling, hammer drilling, chiseling & neutral Cordless Power Tools SDS-Plus chuck 1200 rmp Variable trigger for maximum drilling control Powerful class leading Ramset 18V cordless rotary hammer delivers corded tool performance for a variety of concrete drilling applications. Battery Pack Battery Type No-load Speed Blow Rate (Full-load) Impact Energy Maximum Drill Diameters Concrete Steel Wood Optimum Drilling Diameter - Concrete Tool Holder Weight incl. Battery Wear Eye and Ear Protection 18 V / 3.0 Ah Li-Ion 0-1200 rpm 0-4500 bpm 3.0 J 24 mm 13 mm 28 mm 6-14 mm SDS-Plus 4 kg Rotary Hammer Part No Order Qty CRH18V Rotary Hammer* 1 CBASEKIT18V 18V Base Kit (2x Batteries CBAT18V, 1x Charger CC1828V, 1x Torch CT18V, 1x Bag CKITBAG) 1 KIT *Can be purchased as bare unit or as part of a kit. Builder Plumber Electrician Drilling into Concrete 4 4 4 Light Chiseling 4 4 5 www.ramset.com.au 1300 780 063 High powered servicable motor - 3.0J impact energy High quality, large capacity 18V battery pack for fade free energy transfer and enhanced performance L-shape construction for perfect balance and control 4 mode - drilling, hammerdrilling, chiselling and neutral index All metal gearbox for durability High speed / maximum impact energy with safety clutch Block construction for exact seating of bearings and maximum robustness 2 year warranty (see page 15) Battery (3.0Ah Lithium Ion - CBAT18V) Charger (Tri-Mode - CC1828V) Carbide Drill Bits, Chisels & Cores (refer to page 31-33)

Hammer Drill Driver 18V Three Mode Drill All metal single sleeve 13mm/ 1/2 tungsten carbide jaw chuck Reversible battery pack to optimise balance All metal transmission - gearing system Auxillary side handle for improved control & stability Cordless Power Tools Powerful 18 volt combination tool for high torque drilling, screwdriving and percussion drilling. Battery Pack 18 V / 3.0 Ah Battery Type Li-Ion No Load Speed (1st gear / 2nd gear) 0-450 / 0-1700 rpm Beats Per Minute (1st gear / 2nd gear) 0-7200 / 0-27200 bpm Max. Drilling Capacity Steel / Wood / Masonry 13 / 38 / 16 mm Torque Settings 24 Torque Soft Joint / Hard Joint 32 / 71 Nm Weight incl. Battery 2.6 kg Wear Eye and Ear Protection Hammer Drill Driver Part No Order Qty CHDD18V Hammer Drill Driver* 1 CBASEKIT18V 18V Base Kit (2x Batteries CBAT18V, 1x Charger CC1828V, 1x Torch CT18V, 1x Bag CKITBAG) 1 KIT *Can be purchased as bare unit or as part of a kit. Builder Plumber Electrician Carpenter HVAC Timber / Steel Drilling 4 4 4 4 4 Masonry Drilling 4 4 4 4 4 Screw Driving 4 4 4 4 4 Impressive 71 Nm of torque Variable speed trigger for enhanced control All metal planetary gears for durability and high torque performance Convenient percussion drill mode for masonry and stone drilling 24 stage torque adjustment Spindle lock plus keyless chuck - comfortable bit change with one hand Ergonomic soft grip design for comfortable use Reversible battery pack optimises balance while drilling overhead 2 year warranty (see page 15) Battery (3.0Ah Lithium Ion - CBAT18V) Charger (Tri-Mode - CC1828V) Driver Bits (Refer to page 21) www.ramset.com.au 1300 780 063 6

Drill Driver 18V Two Mode Drill Cordless Power Tools All metal single sleeve 13mm / 1/2 tungsten carbide jaw chuck Reversible battery pack to optimise balance All metal transmission gearing system Soft grip handle for comfortable use Powerful 18 Volt combination tool for high torque drilling and screwdriving. Battery Pack 18 V / 3.0 Ah Battery Type Li-Ion No Load Speed (1st gear / 2nd gear) 0-450 / 0-1700 rpm Keyless Chuck 1.5-13 mm Max. Drilling Capacity in Steel/Wood 13 / 38 mm Wood Screws 12 mm Torque Settings 24 Torque Soft Joint / Hard Joint 32 / 71 Nm Weight incl. Battery 2.6 kg Wear Eye and Ear Protection Drill Driver Part No Order Qty CDD18V Drill Driver* 1 CBASEKIT18V 18V Base Kit (2x Batteries CBAT18V, 1x Charger CC1828V, 1x Torch CT18V, 1x Bag CKITBAG) 1 KIT *Can be purchased as bare unit or as part of a kit. Builder Plumber Electrician Carpenter HVAC Timber / Steel drilling 4 4 4 4 4 Screw Driving 4 4 4 4 4 Impressive 71 Nm of torque Variable speed trigger for enhanced control All metal planetary gears for high torque performance 24 stage torque adjustment Spindle lock and keyless chuck - comfortable bit change with one hand Reversible battery pack allows drill to fit in tight areas and optimises balance while drilling overhead Ergonomic softgrip design for comfortable use 2 year warranty (see page 15) Battery (3.0Ah Lithium Ion - CBAT18V) Charger (Tri-Mode - CC1828V) Driver Bits (Refer to page 21) 7 www.ramset.com.au 1300 780 063

Impact Wrench 18V Heavy Duty Fastening Tool High torque 325Nm motor Magnesium gear case for added durability and lighter weight Reversible battery pack to optimise balance Soft grip handle for comfortable use Cordless Power Tools 18 Volt impact wrench for fast and easy fastening of large construction anchors, such as BraceSet and Boa Coil. Battery Pack Battery Type No Load Speed Impact Rate Drive Shank Square Torque Spindle Ø Weight incl. Battery Wear Eye and Ear Protection 18 V / 3.0 Ah Li-Ion 0-1400 rpm 0-2200 Ipm ½ Square Drive 325 Nm M14 3.9kg Impact Wrench Part No Order Qty CIW18V Impact Wrench* 1 CBASEKIT18V 18V Base Kit (2x Batteries CBAT18V, 1x Charger CC1828V, 1x Torch CT18V, 1x Bag CKITBAG) 1 KIT *Can be purchased as bare unit or as part of a kit. Setting & Removing Anchors Builder Plumber HVAC 4 4 4 Impressive 325 Nm of torque Variable speed trigger for enhanced control Soft grip handle reduces vibration and fatigue Dynamic brake stops unit immediatly after switch is released for faster socket changes Magnesium gear case for added durability and lighter weight Reversible battery pack allows drill to fit in tight areas and optimises balance while working overhead 2 year warranty (see page 15) Battery (3.0Ah Lithium Ion - CBAT18V) Charger (Tri-Mode - CC1828V) Hex Sockets (Refer to page 21) www.ramset.com.au 1300 780 063 8

Impact Driver 18V Fixing & Fastening Tool 1/4 hex bit holder High speed all metal gear and impact mechanism 160Nm torque Cordless Power Tools Reversible battery pack to optimise balance Soft grip handle for comfortable use High speed and high torque tool for fixing and fastening applications. Battery Pack Battery Type No Load Speed Beats Per Minute Bit Retention Torque Weight incl. Battery Wear Eye and Ear Protection 18 V / 3.0 Ah Li-Ion 0-2600 rpm 3200 bpm ¼ Hex 160Nm 2.4kg Impact Driver Part No Order Qty CID18V Impact Driver* 1 CBASEKIT18V 18V Base Kit (2x Batteries CBAT18V, 1x Charger CC1828V, 1x Torch CT18V, 1x Bag CKITBAG) 1 KIT *Can be purchased as bare unit or as part of a kit. Builder Plumber Electrician Carpenter HVAC Screw Driving 4 4 4 4 4 ¼ Hex bit holder. 160 Nm of torque Variable speed trigger for enhanced control High speed 2600rpm all metal gear and impact mechanism LED lighting for working in dark spaces All metal gear and impact mechanism Soft grip moulded handle for improved comfort Reversible battery pack allows drill to fit in tight areas and optimizes balance while drilling overhead 2 year warranty (see page 15) Battery (3.0Ah Lithium Ion - CBAT18V) Charger (Tri-Mode - CC1828V) Driver Bits (Refer to page 21) 9 www.ramset.com.au 1300 780 063

Circular Saw 18V Timber Trim Saw Soft grip handle for comfortable use Electronic motor brake stops saw within seconds Cordless Power Tools Lightweight aircraft aluminium shoe All metal upper and lower guards for impact resistance Powerful 18 Volt circular saw ideal for cutting and trimming timber on the job site. Battery Pack Battery Type No Load Speed Blade Size Max Cutting Depth Weight incl. Battery Wear Eye and Ear Protection 18 V / 3.0 Ah Li-Ion 0-3200 rpm 165mm 90 54mm 45 39mm 4.0kg Circular Saw Part No Order Qty CCS18V Circular Saw* 1 CBASEKIT18V 18V Base Kit (2x Batteries CBAT18V, 1x Charger CC1828V, 1x Torch CT18V, 1x Bag CKITBAG) 1 KIT *Can be purchased as bare unit or as part of a kit. Builder Carpenter Formworker Cutting Timber 4 4 4 18 volt Li-Ion technology with 3.0Ah for longer runtime and less weight than NiCd or NIMH 18 volt batteries Ergonomic soft grip handle for comfortable use All metal upper and lower guards for impact resistance Compact, light and well balanced Excellent visibility of cutting line Light weight aircraft aluminium shoe Electronic motor brake, saw stops within seconds Spindle lock 2 year warranty (see page 15) Battery (3.0Ah Lithium Ion - CBAT18V) Charger (Tri-Mode - CC1828V) Saw Blade (Refer to page 21) www.ramset.com.au 1300 780 063 10

Reciprocating Saw 18V Timber & Steel Cutting Heavy duty blades available for timber or steel Quick blade release mechanism Powerful, all metal heavy duty motor Cordless Power Tools Extendable shoe for full blade use The Ramset reciprocating saw offers cordless cutting convenience for a host of applications for tradesmen and maintenance workers.the saw is designed for maximum power, operator comfort and convenience. Battery Pack Battery Type Stroke Rate No Load Speed Stroke Length Weight incl. Battery Wear Eye and Ear Protection 18 V / 3.0 Ah Li-Ion 0-2700 rpm 29 mm 3.9 kg Reciprocating Saw Part No Order Qty CRS18V Reciprocating Saw* 1 CBASEKIT18V 18V Base Kit (2x Batteries CBAT18V, 1x Charger CC1828V, 1x Torch CT18V, 1x Bag CKITBAG) 1 KIT *Can be purchased as bare unit or as part of a kit. Builder Plumber Electrician Carpenter HVAC Cutting Timber 4 4 4 4 4 Cutting Steel 4 4 4 4 4 18 volt Li-ion technology with 3.0Ah for longer runtime and less weight than NiCd or NiMH batteries Lighter weight allows the user to work longer without fatigue Quick-shoe adjustment for efficient use of blade and cutting depth Quick release blade clamp for fast and easy blade changes without any key Comfortable two finger variable speed trigger Gear protection system - protects the gear box in case of blade lock-ups Low vibration due to Heavy-Duty wobble plate drive 2 year warranty (see page 15) Battery (3.0Ah Lithium Ion - CBAT18V) Charger (Tri-Mode - CC1828V) Saw Blades (Refer to page 21) 11 www.ramset.com.au 1300 780 063

Torch 18V Heavy Duty Jobsite Light 140 Swivel head Soft grip for maximum comfort Cordless Power Tools Poweful 3.0Ah Li-Ion battery provides up to 5 hours lighting Versatile work light for job site illumination. Battery Pack Battery Type 18 V / 3.0 Ah Li-Ion Torch Part No Order Qty CT18V Torch* 1 *Can be purchased as bare unit or as part of a kit. 140 swivel head provides floor to ceiling illumination. Recessed switch eliminates accidental actuation / battery drain. Soft grip for maximum comfort and control 2 year warranty (see page 15) Battery (3.0Ah Lithium Ion - CBAT18V) Charger (Tri-Mode - CC1828V) www.ramset.com.au 1300 780 063 12

Jobsite Radio 18V Heavy Duty Radio Rugged construction Cordless Power Tools Rockford-Fosgate 44 watt 14cm weather resistant speakers with seperate tweeters Impact resistant base Operates on mains supply or Ramset 18V battery packs Powered by a two-way Rockford Fosgate 44 Watt sound system with a 3-stage punch EQ bass boost, the jobsite radio provides crystal clear sound over all volumes. Battery Pack Battery Type Mains Supply Included 18 V / 3.0 Ah Li-Ion 240 V Jobsite Radio Part No Order Qty CRADIO Jobsite Radio* 1 CBASEKIT18V 18V Base Kit (2x Batteries CBAT18V, 1x Charger CC1828V, 1x Torch CT18V, 1x Bag CKITBAG) 1 KIT *Can be purchased as bare unit or as part of a kit. Impact resistant shell, steel handle and an impact resistant base. Operates on 240V AC power or 18V Ramset lithium-ion batteries. Rugged construction withstands a 2 metre drop test to concrete. 14cm, 25W weather resistant speakers with separate tweeters Input jack for MP3 player 12V power outlet for charging mobile phones and MP3 players 2 year warranty (see page 15) Battery (3.0Ah Lithium Ion - CBAT18V) Charger (Tri-Mode - CC1828V) 13 www.ramset.com.au 1300 780 063

Cordless Power Tools Charger & Battery 18V Power Supply LED charge indication Heavy duty construction withstands 2 metre drop Slide rail ensures secure conection to the tool Easy to operate release latches Rubberized feet keeps in place on slick surfaces 3.0 Ah Lithium-Ion Battery and 18V / 28V multi voltage charger. Battery Pack Battery Type Charger Power Supply 18 V / 3.0 Ah Li-Ion 240 V Charger & Battery Part No Order Qty CBAT18V 18V 3.0Ah Battery 1 CBAT1828V 18V / 28V Multi Voltage Charger 1 Batteries and charger can be purchased as individual items or as part of a base kit. Battery fuel gauge LED s light-up showing how much charge is left Heavy duty construction withstands up to a 2 metre drop Consistent Fade Free power throughout the discharge cycle Generator and inverter ready design Encapsulated circuit board protects charger from debris, moisture and impacts High visibility, 360 degree LED indicates charge status Design protects battery during charge cycle, prevents tipping and is wall mountable 45 minute charge time Durable non slip rubber footprint prevents slipping and protect against impacts 2 year warranty (see page 15) 18V Tool Range www.ramset.com.au 1300 780 063 14

18V Base Kit Cordless Power Tools Base kit includes: 1 x Charger (CC1828V), 2 x 18V Batteries (CBAT18V), 1 x 18V Torch (CT18V) and 1 x Kit Bag (CKITBAG) Add any number of bare unit tools to the Base Kit to suit your trade requirements. 18V cordless range base tool kit. Add tools to this base kit. Battery Pack Battery Type 18V Base Kit 18 V / 3.0 Ah Li-Ion Part No Order Qty CBASEKIT18V 18V Base Kit (2x Batteries CBAT18V, 1x Charger CC1828V, 1x Torch CT18V, 1x Bag CKITBAG) 1 KIT Items can also be purchased individually. 2 Year Warranty Every Ramset 18 Volt Lithium-Ion power tool (including battery charger) is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, Ramset will repair or replace any part on a 18 Volt Lithium-Ion power tool which, after examination, is determined by Ramset to be defective in material or workmanship for a period of two (2) years* after the date of purchase. Return the 18 Volt Lithium-Ion power tool and a copy of proof of purchase to the Ramset National Service Centre, freight prepaid and insured, as requested for this warranty to be effective. This warranty does not apply to damage that Ramset determines to be from repairs made or attempted by anyone other than Ramset authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents. *The warranty period for Li-Ion battery packs is two (2) years from the date of purchase. 15 www.ramset.com.au 1300 780 063

Caulking Gun Powered Caulking Gun Pneumatic function reduces risk of plunger breaking the sausage Weighted for comfortable use at different angles Cordless Power Tools Caulking gun for the fast application of sausage cartridges up to 600ml and sealant cartridges up to 300ml. Weight incl. Battery Battery Pack Batteriy Type Max Force Max Pressure Charging Time 2.5Kg 13.2v / 3.0Ah NiMH 1,400Nm 8.5 Bar 60min Noise / Vibration Information Sound Pressure Level: Sound Power Level: 70.5dB (A) 83.5dB (A) Wear Eye and Ear Protection Vibration: The typical weighted acceleration does not exceed 2.5m/s 2 Powered Caulking Gun Part No. Order Qty RCG600 Ramset Caulking Gun 1 Includes 600mm & 300mm nesting tubes, 2 x batteries, charger & plastic case. Pneumatic function reducing the risk of the plunger breaking the sausage and damaging the tool Increased speed Increased productivity Weighted for comfortable use at different angles Effortless dispensing Builder Plumbing Electrical Mechanical Passive Fire Maintenance Contractor Contractor Services Specialist Services Precast and tiltup concrete walls 4 4 4 4 4 4 Concrete ceilings & floors 4 4 4 4 4 4 Metal pipe penetrations 4 4 4 4 4 Cable penetrations 4 4 4 4 Plasterboard FR wall 4 4 4 4 4 4 www.ramset.com.au 1300 780 063 16

Drill Driver 14.4V Two Mode Drill 15 adjustable torque settings 10mm keyless chuck Cordless Power Tools Forward and reverse function Variable trigger for maximum drilling control Ergonomic design A standard duty drill / driver for small to medium drilling and screw driving tasks. Battery Pack 14.4v / 2.0Ah Battery Type NiCd No Load Speed (1st gear/2nd gear) 0-400 / 0-1200rpm Keyless Chuck 1-10mm Max Drilling Capacity in 11 / 25mm Steel / Wood Max Screw Diameter 7mm Torque Settings 15 Torque Adjustment Range 1-8Nm Charging Time 60min Weight incl. Battery 2.1Kg Noise / Vibration Information Sound Pressure Level: Sound Power Level: Wear Eye and Ear Protection 70dB (A) 85dB (A) Drill Driver Part No. Order Qty CSD14A20C Cordless Drill Driver Kit 1 Includes tool, 2.0Ah battery, charger and plastic case Builder Plumber Electrician Carpenter HVAC Timber / Steel drilling 4 4 4 4 4 Screw Driving 4 4 4 4 4 Advanced ergonomic design 10mm keyless chuck Forward and reverse rotation 15 adjustable torque positions and one drill setting Variable speed trigger with soft start up Battery 2.0Ah (BP1420) Driver Bits (Refer to page 21) 17 www.ramset.com.au 1300 780 063

Hammer Drill Driver 14.4V Three Mode Drill 15 adjustable torque settings 13mm keyless chuck Forward and reverse function Variable trigger for maximum drilling control Ergonomic design Cordless Power Tools A heavy duty hammer drill driver for small to medium drilling and screwing. Battery Pack 14.4v / 2.4Ah Battery Type NiCd No Load Speed (1st gear/2nd gear) 0-400 / 0-1400rpm Keyless Chuck 1.5-13mm Max Drilling Capacity in 13 / 35 mm Steel / Wood Max Screw Diameter 10mm Torque Settings 15 Torque Adjustment Range 2-10Nm Charging Time 60min Weight incl. Battery 3.2Kg Noise / Vibration Information Sound Pressure Level: Sound Power Level: 70.dB (A) 85dB (A) Wear Eye and Ear Protection Hammer Drill Driver Part No. Order Qty DD514A24C Cordless Drill Driver Kit 1 Includes tool, 2.4Ah battery, charger and plastic case Builder Plumber Electrician Carpenter HVAC Timber / Steel / Concrete drilling 4 4 4 4 4 Screw Driving 4 4 4 4 4 Advanced ergonomic design 13mm keyless chuck Forward and reverse rotation 15 adjustable torque positions and 1 drill setting Variable speed trigger Battery 2.4Ah (BP1424) Driver Bits (Refer to page 21) www.ramset.com.au 1300 780 063 18

Impact Wrench 18V Cordless ½ Square drive 220Nm of torque Cordless Power Tools Forward and reverse function Variable trigger for maximum control Ergonomic design High torque and lightweight impact wrench designed for anchor setting. Battery Pack Battery Type No Load Speed (1st gear/2nd gear) Impact Rate Max Torque Drive Charging time Weight including battery 18v / 2.6Ah NiMH 2800rpm 3200bpm 220Nm ½ Sq 60min 2.2Kg Noise / Vibration Information Sound Pressure Level: Sound Power Level: Wear Eye and Ear Protection 96dB (A) 107dB (A) Impact Wrench Part No. Order Qty CIW280 Cordless Impact Wrench 1 Includes tool, 2 x 2.6Ah battery, charger and plastic case Builder Plumber HVAC Setting Anchors 4 4 4 Electronic variable speed switch 1/2 Square Drive Well balanced, compact, lightweight, Soft grip handle for comfort 18v/2.6Ah battery 3 Position LED for increased visability Externally removed carbon brushes Large air vents for temperature control No Kick Back for user safety Battery 2.6Ah (CIW280BP) Bit Holder (CIW280BH) Hex Sockets (Refer to page 21) 19 www.ramset.com.au 1300 780 063

Hammer Drill 24V Cordless Electro Pneumatic Hammer Forward and reverse function Variable speed trigger Cordless Power Tools Long life 3.0Ah battery. 1,000 charge cycles Ideal for drilling overhead and on worksites that are without power. A compact yet powerful cordless 24V Electro Pneumatic Hammer for complete autonomy and high power. Battery Pack 24V 3.0Ah Battery Type NiMH Load Speed (1/min) 0-1000rpm Impact Rate 0-4400bpm Impact Force 2.0J Maximum Drill Diameters Concrete - 16mm, Steel - 10mm Wood - 20mm Optimum Drilling Size in Concrete 6-10mm Tool Holder R3 Plus Weight incl. Battery 3.9kg Noise / Vibration Information Sound Pressure Level: Sound Power Level: 91dB (A) 104dB (A) Wear Eye and Ear Protection Vibration: The typical weighted acceleration does not exceed 8m/s 2 Hammer Drill Part No. Order Qty DD528A60C* 2kg Electro Pneumatic Hammer 1 DD528BP30 Battery 24Volt 3.0Ah 2 DD528CH DD528 Charger 1 *Includes tool, battery, charger and plastic case Builder Plumber Electrician Drilling into concrete 4 4 4 Light chiseling 4 4 Equipped with a variable speed trigger, forward and reverse selector for all types of drilling, screwing and unscrewing operations Long life batteries - 1,000 charge cycles expected Charges quickly in 40 minutes Safety clutch Rotary only / Rotary Hammer selector built into casing 13mm (1/2 ) Keyless 3 Jaw Chuck - (B2608572105) Chuck Adaptor - (DAR3DH) Spare Quick Charger - (DD528CH) 3.0Ah Battery - (DD528BP30) Carbide Drill Bits, Chisels & Cores (refer to page 31-33) www.ramset.com.au 1300 780 063 20

Accessories Cordless Power Tools Phillips Head Driver Bits Part No. Driver Type Order Qty HDPH02025 #2 PH x 25 mm 10 HDPH02050 #2 PH x 50 mm 10 HDPH02100 #2 PH x 100 mm 10 HDPH02150 #2 PH x 150 mm 10 HDPH02045DE #2 PH Db. Ended x 45 mm 10 HDPH02065DE #2 PH Db. x 65 mm 10 Hex Driver Bits Part No. Driver Type Order Qty HDHX05032 Int. Hex Drive 5 x 32 mm 10 HDUN04065 Hex Drv. Mag 1/4 x 65 mm 10 HDUN05050 Hex Drv. Mag 5/16 x 50 mm 10 HDUN05065 Hex Drv. Mag 5/16 x 65 mm 10 HDUN06065 Hex Drv. Mag 3/8 x 65 mm 10 Hex Sockets Part No. Driver Type Order Qty 920508 8mm Socket 1 920510 10mm Socket 1 920515 15mm Socket 1 920517 17mm Socket 1 920518 18mm Socket 1 920519 19mm Socket 1 016707 10mm Long Socket 1 016708 13mm Long Socket 1 016709 15mm Long Socket 1 921556 SDS - 1/2 Drive Socket Adaptor 1 Reciprocating Saw Blades Part No. Driver Type Order Qty CRS18VBMC 18V Reciprocationg Saw Blade - METAL 5 CRS18VBWC 18V Reciprocationg Saw Blade - WOOD 5 Circular Saw Blade Part No. Driver Type Order Qty CCS18VBWC 18V Circular Saw 165mm Blade - Timber 1 21 www.ramset.com.au 1300 780 063

DynaDrill Corded Power Tools DynaDrill Corded Power Tools www.ramset.com.au 1300 780 063 22

DynaDrill 526 2kg Electro Pneumatic Hammer Powerful 800w motor DynaDrill Corded Power Tools 2 mode drilling. Drilling and hammering Soft grip handle for comfortable control The Ramset DynaDrill 526 rotary hammer, with its quick change R drive tool-holder/keyless chuck assemblies, makes it the ideal choice for the busy tradesman that requires a truly versatile tool to cover all those common applications regardless whether you re drilling into concrete, timber or steel. Voltage 240V Power Input 800w Rated Speed 0-900rpm Impact Rate 0-4400bpm Impact Force (Max) 3.0J Maximum Drill Diameters Concrete 26mm Masonary (using Core Bit) 68mm Steel 13mm Wood 30mm Optimum drilling size in concrete 8-16mm Weight 2.7Kg Tool Holder R3 Plus DynaDrill 526 Part No. Order Qty DD526 2kg Electro Pneumatic Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual Builder Plumber Electirician Drilling into concrete 4 4 4 Powerful 800w motor Soft grip main handle with an auxiliary handle for a more secure hold Rotating brush plate for increased power Same power forward and reverse Depth gauge Positive locking drill bits 3J impact force! Noise / Vibration Information Sound pressure level: Sound power level: 91dB (A) 102dB (A) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 13m/s 2 Carbide Drill Bits, Chisels & Cores (refer to page 31-33) 23 www.ramset.com.au 1300 780 063

DynaDrill 527 2kg Combi Hammer Powerful 800w motor 3 mode drilling. Drilling, hammering and chiselling Soft grip handle for comfortable control DynaDrill Corded Power Tools The Ramset DynaDrill 527 Rotary Hammer, with quick change R drive tool-holder, is a multiple use medium duty rotary hammer, with the added versatility of light chiselling, the comfort fit handle ensures a positive grip for both chiselling and overhead applications. Voltage 240V Power Input 800w Rated Speed 0-900rpm Impact Rate 0-4400bpm Impact Force (Max) 3.0J Maximum Drill Diameters Concrete 26mm Masonary (using Core Bit) 68mm Steel 13mm Wood 30mm Optimum Drilling Size in Concrete 8-16mm Chiselling Positions 36 Weight 2.7Kg Tool Holder R3 Plus DynaDrill 527 Part No. Order Qty DD527 2kg Combi Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual Builder Plumber Electirician Drilling into concrete 4 4 4 Light Chiselling 4 4 4 Powerful 800w motor Chiselling function for increased applications & versatility Rotating brush plate for increased power Same power forward and reverse Depth gauge Positive locking drill bits 3J impact force! Noise / Vibration Information Sound pressure level: Sound power level: 91dB (A) 102dB (A) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 13m/s 2 drill or 11m/s 2 chisel. Carbide Drill Bits, Chisels & Cores (refer to page 31-33) www.ramset.com.au 1300 780 063 24

DynaDrill 532 3kg Electro Pneumatic Hammer DynaDrill Corded Power Tools Vibration dampening handle Ergonomic D-shape handle The Ramset DynaDrill 532 Rotary Hammer, fitted with R Drive, the latest development in long life drill drive systems. The ideal Rotary Hammer for plumbing, air conditioning, fire protection, electrical and mechanical services installation. Where fast, efficient drilling into ceiling slabs with minimal operator fatigue is paramount, the DD532 is in a league of its own. Voltage 240V Power Input 720w Rated Speed 0-800rpm Impact Rate 0-4000bpm Impact Force (Max) 3.3J Maximum Drill Diameters Concrete 26mm Masonary (using Core Bit) 80mm Steel 13mm Wood 30mm Optimum Drilling Size in Concrete 10-18mm Weight 3.3Kg Tool Holder R3 Plus DynaDrill 532 Part No. Order Qty DD532 3kg Electro Pneumatic Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual Builder Plumber Electirician Drilling into concrete 4 4 4 Anti vibration handle, adjustable through 360 Ergonomic D shaped handle - well balanced Specially treated drive key for longer tool-holder life Lubricant reservoir in tool-holder Vibration-damping D handle Rotary Only / Rotary Hammer selector built into casing Noise / Vibration Information Sound pressure level: Sound power level: 87dB (A) 100dB (A) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 10m/s 2 13mm (1/2 ) Keyless 3 Jaw Chuck (B2608572105) Chuck Adaptor 1/2 x 20mm Thread (DAR3DH) Carbide Drill Bits, Chisels & Cores (refer to page 31-33) 25 www.ramset.com.au 1300 780 063

DynaDrill 544 4kg Combi Hammer Quick release SDS drive tool holder. Additional 3 jaw keyless chuck available as accessory (Part No. 054288) 180 auxillary handle adjustment for left and right handed use Vibration dampening mechanism Soft grip handle for comfortable use DynaDrill Corded Power Tools The Ramset DynaDrill 544 is a class leading 4kg combi hammer drill in terms of performance and vibration reduction mechanisms. A robust and ergonomic design makes it the ideal tool for volume drilling in concrete, light picking Voltage 240V Power Input 900w Rated Speed 0-760rpm Impact Rate 0-3600bpm Impact Force (Max) 5.0J Maximum Drill Diameters Concrete 32mm Masonary (using Core Bit) 90mm Steel 13mm Wood 30mm Optimum Drilling Size in Concrete 14-25mm Chiselling Positions 12 Weight 4.7Kg Tool Holder R3 Plus DynaDrill 544 Part No. Order Qty DD544 4kg Electro Pneumatic Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual Builder Plumber Electirician Drilling into concrete 4 4 4 Removing Tiles (light chiseling) 4 4 Core Cutting 4 4 4 Powerful 900w motor Vibration damping mechanism for super smooth operation Quick lock keyless bit exchange Reverse switch Electro pneumatic impact mechanism In-built safety clutch providing operator protection should a drill bit jam. Soft grip, back and side handle for safe and fatigue free operations Finger tip control for point start accuracy with variable speed adjustment Sealed lubrication system for extended service intervals Noise / Vibration Information Sound pressure level: Sound power level: 93dB (A) 104dB (A) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 10m/s 2 drill or 9m/s 2 chisel. 3 Jaw Keyless Chuck (054288) Carbide Drill Bits, Chisels & Cores (refer to page 31-33) www.ramset.com.au 1300 780 063 26

DynaDrill 565 5kg Combi Hammer Vibration dampening mechanism DynaDrill Corded Power Tools Improved impact mechanism excellent transfer of energy to the drill bit or chisel Variable speed trigger The Ramset DynaDrill 565 Rotary Hammer is a versatile multiple use rotary hammer designed to get through the toughest job with ease. The DD565 incorporates many new innovative features that make it the ideal tool for those who want consistent hard work from a tool that can take it. Voltage 240V Power Input 1,100w Rated Speed 0-400rpm Impact Rate 0-3000bpm Impact Force (Max) 10.0J Maximum Drill Diameters Concrete 40 mm Masonary (using Core Bit) 125 mm Optimum Drilling Size in Concrete 18-38mm Chiselling Positions 16 Weight 5.9Kg Tool Holder R3 Max Cable Length 4m DynaDrill 565 Part No. Order Qty DD565 5kg Electro Pneumatic Combi Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual Builder Plumber Electirician Drilling into concrete 4 4 4 Removing Tiles (light chiseling) 4 4 Core Cutting 4 4 4 Robust design and oil lubrication, guarantees the longest tool lifetime, even under the toughest working conditions Ergonomically designed and well balanced High removal rates, excellent performance / weight ratio Safety clutch system allows continuous drilling even when the drill bit jams in the toughest materials Horizontal and vertical drilling level gauge for accurate drilling Vibration reduction system for comfort while working Power LED indicator Service LED indicator shows 8 hours before tool requires service Rotary and Hammer / Hammer only selector built into casing Noise / Vibration Information Sound pressure level: Sound power level: 98dB (A) 109dB (A) Carbide Drill Bits, Chisels & Cores (refer to page 33) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 8.8m/s 2 27 www.ramset.com.au 1300 780 063

DynaDrill 576 7kg Combi Hammer Safety clutch mechanism 15 Joules of impact force DynaDrill Corded Power Tools Powerful 1350watt motor The Ramset DynaDrill 576 electro pneumatic combi hammer, is designed for large diameter drilling, picking and chiselling in concrete. Voltage 240V Power Input 1,350W Rated Speed 0-280rpm Impact Rate 0-2,800bpm Impact Force (Max) 15J Maximum Drill Diameters Concrete 45 mm Masonary (using Core Bit) 150 mm Optimum Drilling Size in Concrete 24-40mm Machine Weight 7.9kg Chiselling Positions 12 Tool Holder R3 Max Cable Length 4m DynaDrill 576 Part No. Order Qty DD576 7kg Electro Pneumatic Combi Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual Builder Plumber Electirician Drilling into concrete 4 4 4 Removing Tiles (light chiseling) 4 4 Core Cutting 4 4 4 Powerful and robust hammer for large diameter holes or concrete breaking Tool holder adjustment - 12 positions Safety clutch Optimum ergonomics Rotary and Hammer / Hammer only selector built into casing 15J of impact force Noise / Vibration Information Sound pressure level: Sound power level: 97dB (A) 110dB (A) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 9m/s 2 R3 Max Carbide Drill Bits, Chisels & Cores (refer to page 33) www.ramset.com.au 1300 780 063 28

DynaDrill 665 5kg Demolition Hammer Vibration reduction system DynaDrill Corded Power Tools 11J of impact force Ergonomic Design 360 rotary auxillary handle suitable for left or right hand use Powerful 1100w motor The Ramset DynaDrill 665 electro pneumatic demolition hammer is designed for light demolition work. Voltage 240V Power Input 1,100W Impact Rate 0-3,200bpm Impact Force (Max) 11.0J Chisel Positions 16 Weight 5.9kg Tool Holder R3 Max Cable Length 4m DynaDrill 665 Part No. Order Qty DD665 5kg Demolition Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual Robust design and oil lubrication guarantees the longest tool lifetime, even under the toughest working conditions Ergonomically designed - well balanced, little down-force pressure necessary, high removal rates, excellent performance / weight ratio 16 different chisel positions Improved impact mechanism, excellent transfer of energy to the chisel Vibration Reduction System for comfort while working Electronic switch with locking function and variable chiselling speeds Power LED indicator Service LED indicator shows 8 hours before tool requires service D - Handle especially designed for chiselling actions Builder Plumber Electirician Concrete breaking 4 4 4 Noise / Vibration Information Sound pressure level: Sound power level: 98dB (A) 109dB (A) R3 Max Chisels (refer to page 33) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 8.8m/s 2 29 www.ramset.com.au 1300 780 063

DynaDrill 610 10kg Demolition Hammer Vibration dampening mechanism 25J of impact force DynaDrill Corded Power Tools 360 rotary auxillary handle suitable for left or right hand use Powerful 1500w motor The Ramset DynaDrill 610 is a strong and robust demolition hammer. It s compact design with a high power to weight ratio, makes it ideal for large concrete demolition jobs. Voltage 240V Power Input 1,500w Impact Rate 950-1,890bpm Impact Force (Max) 6-25J Chiselling Positions 12 Weight 9.9Kg Tool Holder R3 Max Cable Length 4m DynaDrill 610 Part No. Order Qty DD610 10kg Demolition Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual High-performance and power make this demolition hammer one of the highest performing hammers of its kind on the market Impact force adjustable through 6 levels to match base material and application Multi position tool holder Fixed position power switch Builder Plumber Electirician Concrete breaking 4 4 4 Noise / Vibration Information Sound power level: 108dB (A) R3 Max Chisels (refer to page 33) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 13m/s 2 www.ramset.com.au 1300 780 063 30

Accessories Carbide Drill Bits R3 PLUS patented carbide drill bits are the perfect match for your Ramset DynaDrill or cordless rotary hammer. Together, they form a powerful concrete drilling system to get the job done faster. R3 PLUS carbide comprises tough tungsten carbide head design and 4 spiral flutes for faster waste removal and drilling speed. R3 PLUS Carbide and Chisels fit all SDS Plus machines and previous Ramset model 63 Series tools. R3 PLUS carbide drill bits are also available with 4 cutter heads for greater performance and drilling accuracy. DynaDrill Corded Power Tools Standard (2 Cutter) Carbide Drill Bits Part No. Diameter (mm/inch) Work Length (mm) Total Length (mm) Use with CRH18V Use with DD528 Use with DD526/527 Use with DD532 Use with DD544 DDR305050 5 50 110 DDR305100 5 100 160 DDR305065X5 5.5 80 140 DDR305125X5 5.5 150 210 DDR306050 6 50 110 DDR306100 6 100 160 DDR306150 6 150 210 DDR306050X3 1/4 50 110 DDR306100X3 1/4 100 160 DDR306150X3 1/4 150 210 DDR307065 7 100 160 DDR308065 8 100 160 DDR308150 8 150 210 DDR310100 10 100 160 DDR310180 10 200 260 DDR310400 10 400 460 DDR312125 12 150 210 DDR312250 12 250 310 DDR312400 12 400 460 DDR312125X7 1/2 150 210 DDR313200 13 200 260 DDR314200 14 200 250 DDR315150 15 150 200 DDR316125 16 150 200 DDR316200 16 200 250 DDR316400 16 400 450 Optimum Use Outside Optimum Not Recommended Quattro (4 cutter) Carbide Drill Bits Part No. Diameter (mm/inch) Work Length (mm) Total Length (mm) Use with CRH18V Use with DD528 Use with DD526/527 Use with DD532 Use with DD544 DQR316200 16 250 300 DQR316400 16 400 450 DQR318200 18 200 250 DQR318400 18 400 460 DQR319250 19 250 310 DQR320200 20 200 250 DQR320400 20 400 450 DQR322200 22 200 250 DQR322400 22 400 450 DQR324200 24 200 250 DQR324400 24 400 450 DQR325400 25 400 450 DQR326200 26 250 300 DQR326400 26 400 450 Optimum Use Outside Optimum Not Recommended 31 www.ramset.com.au 1300 780 063

Accessories Carbide Drill Bits & Chisels U3 Ulitmate (Tri-Cutter) Carbide Drill Bits The new Ramset U3 multi-cutter carbide drilling range sets new standards in drilling performance, drill bit lifetime, dust removal and operator comfort. Unique Undulating tip design means faster drilling due to less contact. Curved cutting edge offers improved durability. Extra long centering cutting edge makes drilling smoother and more comfortable. Tri-Cutter carbide head fully embedded and braised into drill bit gives more structural strength. Large volume triple helix for faster dust removal preventing blow back. Universal Fits all SDS plus type chucks. Suitable for drilling all masonry substrates including Brick, Stone, High Strength Concrete and Reinforced Concrete. Ultimate Combining the patented features of the new high strength drill tip and the Ramset DynaDrill program, drilling on construction sites has never been quicker, cleaner or more efficient. NEW Fully embedded cutting element High strength durable head Comfortable smooth drilling Clear wear marking Accurate drill hole diameter Extreme drilling progress Extremely high service life Extra-long centering cutting edge* Improved durability Two-point centering* Optimum drilling performance Two-point centering with recess Curved cutting edge* Wide carbide blades Extremely high service life Undulating tip design* Reduce contact line Extreme drilling progress DynaDrill Corded Power Tools Part No. Diameter (mm/inch) Work Length (mm) Total Length (mm) Use with CRH18V Use with DD528 Use with DD526/527 Use with DD532 Use with DD544 DDU305050 5 50 110 DDU305100 5 100 160 DDU306050 6 50 110 DDU306100 6 100 160 DDU306150 6 150 210 DDU306050X3 1/4" 50 110 DDU306100X3 1/4" 100 160 DDU306150X3 1/4" 150 210 DDU308100 8 100 160 DDU308150 8 150 210 DDU310100 10 100 160 DDU310200 10 200 260 DDU312150 12 150 210 DDU312250 12 250 310 DDU314200 14 200 250 DDU316200 16 200 250 Optimum Use Outside Optimum Not Recommended Chisels Part No. Type Width (mm) Total Length (mm) Use with CRH18V Use with DD527 Use with DD544 DHR3PCS Point - 250 DHR3FCS Flat 20 250 DHR3SC040 Spade 40 250 Optimum Use www.ramset.com.au 1300 780 063 32

Accessories Carbide, Chisels & Core Bits Carbide Drill Bits DynaDrill Corded Power Tools R3 MAX Carbide Drill Bits and Chisels are tough, long-life and designed to also fit all SDS Max machines. R3 MAX Drill Bits have precision engineered cutting and cleaning flutes for efficient and trouble free drilling providing a long life solution. *Larger sizes above 16mm diameter have 4 tungsten carbide cutter heads for efficient heavy duty drilling and long life operation. Part No. Diameter (mm) Work Length (mm) Total Length (mm) Use with DD565 Use with DD576 DDSM12200 12 200 340 DDSM12400 12 400 540 DDSM14200 14 200 340 DDSM14400 14 400 450 DYSM16200 16 250 390 DYSM16400 16 400 540 DYSM18200 18 250 390 DYSM18400 18 400 540 DYSM20200 20 200 320 DYSM20400 20 400 520 DYSM22400 22 400 520 DYSM24200 24 200 320 DYSM24400 24 400 520 DYSM25400 25 400 520 DYSM25800 25 800 920 DYSM26400 26 400 520 DYSM28450 28 450 570 DYSM30450 30 450 570 DYSM32450 32 450 570 DYSM35450 35 450 570 DYSM38450 38 450 570 DYSM40450 40 450 570 Optimum Use Outside Optimum Not Recommended Chisels Part No. Type Width (mm) Total Length (mm) Use with DD565 Use with DD576 Use with DD665 Use with DD610 DHSMPCS Point - 280 DHSMPCM Point - 400 DHSMPCL Point - 600 DHSMFCS Flat 25 280 DHSMFCM Flat 25 400 DHSMFCL Flat 25 600 DHSMSC080 Spade 80 300 DHSMSC115 Spade 115 300 DHSMSC050 Spade 50 400 Optimum Use For large diameter concrete hole drilling. From 50mm to 100mm hole diameter. Suits both R3 PLUS and R3 Max drive systems. Core Bit System Part No. DDHR12150 DCHR050 DCHR065 DCHR080 DCHR100 DAHR25280 DAR3HR DASMHR 33 www.ramset.com.au 1300 780 063 12mm Pilot bit 50mm Core bit 65mm Core bit 80mm Core bit 100mm Core bit 250mm Extension R3 Plus Drive Adaptor R3 Max Drive Adaptor

Diamond Drilling Power Tools Diamond Drilling Power Tools www.ramset.com.au 1300 780 063 34

Drilling Motor RM160-2000w 3 speed selector Diamond Drilling Power Tools ½ BSP & 1¼ UNC Connection Water connection Powerful 2000w motor A comfortable yet powerful diamond core drill with superb power to weight ratio that can be hand operated or mounted on a rig. Voltage 240w Power Input 2000w Connection ½ BSP and 1¼ UNC Motor Speeds Speed 1 Speed 2 Speed 3 Load 0-660rpm 0-1550rpm 0-3300rpm Diameter 65-131mm 35-60mm 10-30mm Rig Compatibility TRIX160 Cable Length 5m Weight 5.9kg Noise / Vibration Information Sound pressure level: Sound power level: Wear ear and eye protection Diamond Motor RM160 Part No. Order Qty RM160 Ramset Diamond Motor 1 Accessories 172770 Copper Rings 5 622020 Core Bit Extension ½ x 300Mm 1 622070 Core Bit Extension 1-¼ x 400Mm 1 172710 Portable Water Supply Unit 1 Refer to Page 40 for the full range of core bits 85dB (A) 90dB (A) Integrated friction clutch for highest level of safety Compact & ergonomic Optimal power / speed balance for maximum core drill life Integrated spirit levels for efficient and precise machine adjustment LED indicator for overpressure Drilling Rig Diamond Cores Wet and Dry Vacuums Plumber Electirician HVAC Concrete Coring 4 4 4 35 www.ramset.com.au 1300 780 063

Drilling Rig Suits RM160 & RM250 Motors NEW Adjustable angle Integrated vacuum plate Neck mount connection Diamond Drilling Power Tools A lightweight and easy to handle rig that is capable of very accurate coring from 0 to 90. The trolley system is fitted with rollers to ensure smooth even work in the worst conditions. Height 880mm Length 340mm Width 250mm Weight 12Kg Max Drill Depth 850mm Max Core Diameter 200mm Operational Tilt 0-90 Motor Mounting 60mm connection neck mount Suitable for Motors RM160 & RM250 Diamond Rig TRIX160 Part No. Order Qty TRIX160 Rig to suit RM160 motor 1 Accessories 620827 Vacuum Pump 1 622220 Quick Release Connector Bolts 1 624025 Vacuum Set 1 624019 Small Water Collector 1 624020 Membranes For Water Collector 1 172710 Portable Water Supply Unit 1 622200 Sharpening Plate 1 Robust rig that enables more stable and controlled drilling Integrated vacuum plate Increased life of core bits Reduces drilling vibration Drilling Motors Wet and Dry Vacuums Diamond Cores www.ramset.com.au 1300 780 063 36

Drilling Motor RM250-2500w Diamond Drilling Power Tools NEW Powerful 2500w motor 2 speed selector The RM250 is a high performance drilling machine designed for use in conjunction with a drilling rig. A 2 speed motor with a maximum drilling diameter of 250mm makes it the ideal machine for a range of coring applications on the construction site. Voltage 240V Power Input 2500w Connection ½ BSP & 1¼ UNC Max Drilling Capacity Rig Mounted 250mm Motor Speeds Speed 1 Speed 2 Load 360rpm 850rpm Diameter 150-250mm 52-150mm Rig Compatibility TRIX160 & TRIX350 Cable Length 3m Insulation Class II Weight 11Kg Noise / Vibration Information Noise level with motor: 90dB (A) Diamond Motor RM250 Part No. Order Qty RM250 Diamond Drilling Motor 1 Accessories 622020 Core Bit Extension 1/2 x 300mm 1 622070 Core Bit Extension 1-1/4 x 400mm 1 172770 Copper Rings 5 172710 Portable Water Supply Unit 1 Refer to Page 40 for the full range of core bits Double shank 1 ¼ UNC & ½ BSP connection Integrated friction clutch for highest level of user safety 2 speed gear box Thermal protection to avoid over heating the motor Double shank means the machine is compatible with 1/2 and 1 1/4 cores Progressive start Drilling Rig Diamond Cores Wet and Dry Vacuums Plumber Electirician HVAC Concrete Coring 4 4 4 37 www.ramset.com.au 1300 780 063

Drilling Motor RM350-3000w Powerful 3000w motor 3 speed selector Diamond Drilling Power Tools UNC 1 ¼ connection The RM350 is designed for ease of use on the TRIX350 drilling rig. The combination is ideally suited to heavy duty work in the demanding conditions found on construction sites. With a 3000w motor, it is powerful enough to tackle even the biggest jobs. Voltage 240V Power Input 3000w Connection 1¼ UNC Max Drilling Capacity Rig Mounted 350mm Motor Speeds Speed 1 Speed 2 Speed 3 Load 230rpm 500rpm 1030rpm Diameter 150-350mm 90-150mm 50-90mm Rig Compatibility TRIX350 Cable Length 3m Insulation Class II Weight 13Kg Noise / Vibration Information Noise level with motor: 90dB (A) Diamond Motor RM350 Part No. Order Qty 623003 RM350 Motor 1 Accessories 622070 Extension 1-1/4 x 400mm 1 172770 Copper Rings 5 172710 Portable Water Supply Unit 1 Refer to Page 40 for the full range of core bits Integrated friction clutch for highest level of safety Robust and powerful design 3000w provides optimum torque and drilling speed Thermal protection Long life Drilling Rig Diamond Cores Wet and Dry Vacuums Plumber Electirician HVAC Concrete Coring 4 4 4 www.ramset.com.au 1300 780 063 38

Drilling Rig Suits RM250 & RM350 Motors NEW Diamond Drilling Power Tools Block mount connection Adjustable angle Wheel for easy transport Integrated vacuum plate A heavy duty rig that is capable of very accurate coring up to a diameter of 350mm. The trolley system is fitted with rollers to ensure smooth operation even in the worst conditions. A simple low maintenance rig built strong enough to take a heavy work load. Height 1030mm Length 400mm Width 310mm Weight 20Kg Max Drill Depth 652mm Max Core Diameter 350mm Operational Tilt 0-45 Suitable for Motors RM250 & RM350 Diamond Rig TRIX350 Part No. Order Qty TRIX350 Large Drilling Rig 1 Accessories 620827 Vacuum Pump 1 624026 Vacuum Set 1 622200 Quick Release Connector Bolts 1 624022 Large Water Collector 1 624023 Membranes for Water Collector 1 172710 Portable Water Supply Unit 1 622200 Sharpening Plate 1 Continuous angle adjustment to any position Integrated vacuum plate Easy to operate and adjust Reduces drilling vibration Drilling Motors Wet and Dry Vacuums Diamond Cores 39 www.ramset.com.au 1300 780 063

Diamond Core Bits NEW 1¼ UNC connection ½ BSP connection Operating Tips Refer to the drilling machine instructions to ensure the correct speed is selected for the hole size and the hardness of the material being drilled. General rule: Smaller holes higher speed Larger holes lower speed Ensure the motor has adequate power Keep constant pressure on the core, do not force it, allow the diamonds to cut at there own pace For best results ensure an adequate flow of water. Diamond Drilling Power Tools Ramset Diamond Cores use industrial grade diamond, which is the hardest material on earth. They are ground down into very small pieces and mixed with a metallic paste called the bond. This is what holds the diamonds in place and forms the segments or the teeth of the core bit. Diamonds within the segments are very brittle and break several times before wearing away, this breaking constantly exposes new sharp cutting edges and it is these edges that cut the material. Ramset offer a comprehensive range of Diamond Cores, which have been selected to meet most common coring applications. Drilling Motors Drilling Rigs Wet and Dry Vacuums Sharpening Plate Diamond Core Drill Bits Part No. ½ BSP Thread Suits Drilling Motor DCDS14300 14mm x 300mm RM160 DCDS16300 16mm x 300mm RM160 DCDS18300 18mm x 300mm RM160 DCDS20300 20mm x 300mm RM160 DCDS24300 24mm x 300mm RM160 DCDS26300 26mm x 300mm RM160 DCDS32300 32mm x 300mm RM160 DCDS35300 35mm x 300mm RM160 DCDS40300 40mm x 300mm RM160 DCDS45300 45mm x 300mm RM160 DCDS52300 52mm x 300mm RM160, RM250 Laser welded diamond segments Wet Core Drill Bits Part No. 1 1/4 UNC Thread Suits Drilling Motor DCDL52450 52mm x 450mm RM160, RM250, RM350 DCDL66450 66mm x 450mm RM160, RM250, RM350 DCDL76450 76mm x 450mm RM160, RM250, RM350 DCDL82450 82mm x 450mm RM160, RM250, RM350 DCDL91450 91mm x 450mm RM160, RM250, RM350 DCDL101450 101mm x 450mm RM160, RM250, RM350 DCDL116450 116mm x 450mm RM160, RM250, RM350 DCDL121450 121mm x 450mm RM160, RM250, RM350 DCDL126450 126mm x 450mm RM160, RM250, RM350 DCDL131450 131mm x 450mm RM160, RM250, RM350 DCDL142450 142mm x 450mm RM250, RM350 DCDL151450 151mm x 450mm RM250, RM350 Other cores sizes (150-350mm) are available on request. Please consult your Ramset representative for advice. www.ramset.com.au 1300 780 063 40

Wet & Dry Vacuum 30 Litre NEW Diamond Drilling Power Tools Permanent filter cleaning function Powerful 1600w motor Heavy duty wheels Powerful industrial quality vacuum cleaner for dust and water extraction. Auto electromagnetic pulse filter cleaning with Permanant Clean - cleans the filters permantly during the vacuuming process without interrupting the intake flow. Voltage Power Container Volume Max Airflow Max Water Column Depression Electric Cable Suction Hose Weight (without hose) Size Noise / Vibration Information Noise level: 70dB (A) 240V 1600W 30 Litres 61 L/s 248 mbar 8m 5m / Ø35mm 15kg 550 x 400 x 550mm Wet and Dry Vacuum AC1630P Part No. Order Qty AC1630P 30L vacuum wet & dry 1 Accessories 644004 5m antistatic hose 1 41 www.ramset.com.au 1300 780 063 Permanent Clean function Powerful motor provides industrial quality cleaning Polyester filters provide longer life Dust free coring, grinding and cutting Dust bag optional All accessories included Suits all trades 644006 2 sets polyester filters 1 Drilling Motors Diamond Cores Angle Grinders Wall Chaser Builder Plumber Electrician HVAC Core cutting dust extraction 4 4 4 Wall chasing dust extraction 4 Angle Grinder dust extraction 4 4 4

Wet & Dry Vacuum 50 Litre Longlife polyester filters 50 litre capacity Powerful 1600w motor Diamond Drilling Power Tools Industrial quality wet and dry vacuum unit for powerful dust and water extraction. It s extremely powerful cyclonic suction system makes it the ideal companion for the Ramset Diamond program. Voltage Power Container Volume Max Airflow Max Water Column Depression Electric Cable Suction Hose Weight (without hose) Size Noise / Vibration Information Noise level: 70dB (A) 240V 1600W 50 Litres 64 L/s 259 mbar 8m 5m / Ø35mm 11.50kg 400 x 400 x 560mm Wet and Dry Vacuum R1600-50L Part No. Order Qty 620900 50L vacuum wet & dry 1 Accessories 644004 5m antistatic hose 1 644006 2 sets polyester filters 1 Drilling Motors Diamond Cores Angle Grinders Wall Chaser Polyester filters provide longer life Dust free coring, grinding and cutting No dust bag required Automatic vibration system for filter cleaning prevents downtime Suits all trades Builder Plumber Electrician HVAC Core cutting dust extraction 4 4 4 Wall chasing dust extraction 4 Angle Grinder dust extraction 4 4 4 www.ramset.com.au 1300 780 063 42

Diamond Drilling Power Tools Diamond Drilling Accessories Vacuum System Drill anywhere anchor free *for use in retrofit where anchors cannot be set Water Collection Mess free concrete coring, water collection kit ensures that there is no mess, portable water unit allows you to work anywhere. Vacuum Cleaner - Part No. 620900 or AC1630P Portable water supply unit - Part No. 172710 43 www.ramset.com.au 1300 780 063

Diamond Drilling Accessories Vacuum Sets Part No. 624025 to suit TRIX160 Drilling Rig Part No. 624026 to suit TRIX350 Drilling Rig Vacuum Pump For use with Diamond Drilling Rigs 0.48kw, 20V, 4.5amp, 50-60hz 10 litre vacuum tank capacity Maximum pressure 8 bar Produced volume 5.9m 3 /hour Dimensions 340 x 360 x 620mm Vacuum Pump - Part No. 620827 Diamond Drilling Power Tools Quick Release Bolts M12 for fixing into DynaSet drop-in masonry anchors to secure drill rigs. Quick Realse Bolts - Part No. 622220 Water Collector Water collector - to suit TRIX160 Rig - Part No. 624019 Membranes for water collector - Part No. 624020 Water collector to suit TRIX350 Rig- Part No. 624022 Membranes for water collector- Part No. 624023 Copper Rings and Sharpening Plate Set of 5 rings to suit 1 ¼ drive core drills to prevent seizure Copper Rings - Part No. 172770 Sharpening plate - Part No. 622200 Extensions for Core Drills ½ x 300mm - Part No. 622020 1 ¼ x 400mm - Part No. 622070 www.ramset.com.au 1300 780 063 44

Notes 45 www.ramset.com.au 1300 780 063

Cutting & Grinding Power Tools Cutting & Grinding Power Tools www.ramset.com.au 1300 780 063 46

Surface Grinder SG125E Cutting & Grinding Power Tools 1800w motor Dust extraction connection Ergonomic side handles Fast dust free concrete surface grinding. Ideal for small concrete grinding jobs. Power Speed (no load) Spindle Weight Cable Noise / Vibration Information Sound pressure level: Sound intensity level: 1800w 10000rpm M14 5.5kg 3m 93dB (A) 106dB (A) Surface Grinder SG125E Part No. Order Qty SG125E Concrete Surface Grinder 1 Accessories 610492 Cup wheel - 125mm Turbo Grinding (Concrete) 1 610497 Cup wheel - 125mm Turbo Grinding (Abrasive) 1 610477 Cup wheel - 125mm Single Row Grinding (Concrete) 1 610487 Cup wheel - 125mm Single Row Grinding (Abrasive) 1 610472 Cup wheel - 125mm Double Row Grinding (Concrete) 1 610482 Cup wheel - 125mm Double Row Grinding (Abrasive) 1 610494 Cup wheel - 125mm Superturbo Grinding (Concrete) 1 610499 Cup wheel - 125mm Superturbo Grinding (Abrasive) 1 Cup wheels are available in soft bond for concrete (hard) substrates and hard bond for abrasive (soft) materials to ensure longevity. Single row is for maximum material removal. Double row is used for universal grinding. Turbo cup wheels are designed for light grinding and finishing. The new Superturbo is designed for finishing applications such as formwork seams and graffiti removal. 1800w motor Max. 10,000rpm Ergonomic side handles Dust extraction connection Cup Wheels Wet and Dry Vacuums Builder Concretor Formworker Concrete surface grinding 4 4 4 Concrete finishing / polishing 4 4 4 47 www.ramset.com.au 1300 780 063

Wall Chaser RW150E Dust extraction connection Ergonomic handles Powerful 2200w motor 2.6-46.5mm wide x 50mm deep Cutting & Grinding Power Tools Fast and dust free concrete chasing. Ideal for concealment of conduit or wires adjustable from 2.6mm to 46.5mm wide and 50mm deep. Voltage Power Input Disc Diameter Groove Depth Groove Width Weight Concrete blades (610002) included Noise / Vibration Information Sound pressure level: Sound intensity level: Wet and Dry Vacuums Saw Blades 240 Watt 2,200 Watt 150mm 0-50mm 2.6-46.5mm 7.5kg 93dB (A) 106dB (A) Wall Chaser RW150E Part No. Order Qty RW150E Wall Chaser 1 Accessories 610120 Universal blades 2 610002 Concrete blades 2 610220 Abrasive blades 2 Quick blade fixing and removal Variable width and depth of the cut Safe ergonomic design Soft start motor Secure concrete face contact for straight cut Close to edge operation Constructed for optimum dust extraction Builder Plumber Electrician HVAC Concrete Wall Chasing 4 4 4 4 www.ramset.com.au 1300 780 063 48

Angle Grinder 230mm (9 ) Vibration absorbing handle Ergonomic Rat Tail handle Cutting & Grinding Power Tools Powerful 2400w motor Dust extraction hood 610980 Cutting dust hood 610999 Unique anti-lock flanges prevent jams and reduce down time. With 2400w of power and progressive start the RG230E is perfectly suited to larger cutting and grinding jobs. Voltage Power Motor Speed Saw Diameter Cup Grinding Wheel Max Weight Cable Length Size Noise / Vibration Information Sound power level Vibration 240V 2400w 6500rpm 230mm 180mm 6.55kg 5m 495 x 104 x 133mm 102dB (A) The typical hand-arm vibration does not exceed 3m/s 2 Angle Grinder Part No Order Qty RG230E Angle Grinder 230mm (9 ) 2400w 1 Accessories 610999 Dust hood - cutting 1 610980 Dust hood - grinding 1 610468 Cup wheel - 180mm Turbo Abrasive (Soft) 1 610493 Cup wheel - 180mm Turbo Concrete (Hard) 1 GR230FS Anti Lock Flanges 1 GA230MCU7 Cut Off Wheel to suit masonry 1 GA230SCU7 Cut Off Wheel to suit steel 1 49 www.ramset.com.au 1300 780 063 Powerful 2400w motor Soft start for comfort and safety Ergonomically designed handles to ensure solid vibration absorbing comfort Dust extraction system available for grinding applications Anti lock flanges for cutting Diamond Cutting Blades Diamond Cup Wheels Wet & Dry Vacuums RG230E Accessories (included in tool) Builder Plumber HVAC Formworker Concrete Grinding & Cutting 4 4 Steel Cutting & Grinding 4 4 4

Cutting & Grinding Power Tools Diamond Blades Accessories Universal Blades are suited to most general cutting applications and have a large operating range for multi surface use. Turbo Titan+ is the long lasting choice into hard concrete. Abrasive Type A is the choice for use into abrasive materials such as brick and block. Material removal process Blade Types Part No. Diameter (mm) TITAN+ / Universal 610401 115mm 610411 125mm 610431 180mm 610441 230mm TITAN+ / Concrete 610001 125mm 610002 150mm 610004 230mm TYPE A / Abrasive 610210 125mm 610220 150mm 610240 230mm Universal Silver 610046 125mm 610045 230mm Factors affecting the cutting characteristics of a diamond saw blade Cutting conditions Machine Material Cutting depth Power drawn Density Feed rate RPM Abrasivity Cutting pressure Condition of the machine Nature of aggregates Quality of coolant Coolant supply Size of aggregates Type of reinforcement Type of foundation www.ramset.com.au 1300 780 063 50

Notes 51 www.ramset.com.au 1300 780 063

Laser Devices Laser Devices Measuring/Levelling Tools www.ramset.com.au 1300 780 063 52

Rotary Laser RL300 - Interior & Exterior Applications NEW Rotating high powered red class 3R laser diode Laser Devices Dual rotating speeds and various scanning angles IP66 dust and water protection Vertical mode A fully automatic horizontal and vertical laser. Compact ergonomic design and intuitive operation. A multi function laser for both interior and exterior applications. Power Supply 6.4V Li-Ion Self Levelling Range 5 Laser Diode Red 635nm Accuracy Horizontal ± 0.5mm / 10m Accuracy Vertical ± 1.0mm / 10m Working Range with Receiver Ø 600m Rotating Speed 800, 300rpm Scan Angles 0, 10, 45, 90, 180 Manual Slope Setting X and Y Axis ± 5 (± 9%) Temperature Range -10 C - +45 C Dust and Water Protection IP66 Laser Class 3R Weight 2.6kg Rotary Laser Part No Order Qty RL300 Rotating Laser 1 Remote control, floor mount, magnetic target, rechargeable battery / charger, laser glasses and carry case Formwork levelling & allignment Pipe & Cable tray installation Allignment and placement of drywall track Concrete levelling 4 Site preparation & 4 excavation Builder Plumber Electrician HVAC 4 4 4 Ceiling & Partitioners 4 High powered laser beam for easy visibility Two rotating speeds Variable scanning and laser point mode for set-up Permanent 90 beam to zenith for set outs V-W-S function combined with TILT function ensures rotation even with light vibration Adjusted slope setting (manual) up to ± 5 ( ± 9%) in X and Y axis for grade work Li-Ion battery technology. No memory effect or self discharge Related Accessories Universal Tripod Wall and Ceiling Mount Floor to Ceiling Pillar Stave Bracket mounted 53 www.ramset.com.au 1300 780 063

Multi-Liner Laser RLML - Interior Applications NEW Plumb up and down laser beam 2 vertical and 1 horizontal laser lines Laser Devices Mini tripod A versatile laser for numerous indoor applications. Two laser crosses at 90 to each other. Laser cross to the ceiling. Plumb down beam to the floor Power Supply 3 x 1.5V AA Batteries Self Levelling Range ± 3 Laser Diode Red 635nm Accuracy ± 3mm / 10m Working Range without Receiver Ø 10m* Working Range with Receiver Ø 30m Operating Time 12h Temperature Range -10 C - +45 C Dust and Water Protection IP54 Laser Class 3R Weight 1.0kg * Depending on room illumination Multi-LIner Laser Part No Order Qty RLML Multi Liner Laser 1 Floor/wall mount, mini tripod, magnetic target, set of batteries and Padded carry case Allignment and placement of drywall track Allignment and placement of tiles Ceiling & Partitioners 4 Tiler 4 Two lasers cross at 90 to each other for set out work Laser cross to the ceiling giving plumb up Plumb down beam Pulse function for use with receiver giving extended range or outdoor use Locking device for safe transport Visual and audible alarm when out of level Related Accessories Universal Tripod Wall and Ceiling Mount Floor to Ceiling Pillar Stave www.ramset.com.au 1300 780 063 54

Multi-Pointer Laser RL5W - Interior Applications Laser Devices 5 point 650nm red laser diode Magnetic mounted Strong magnetic base plate Strap mounted A versatile laser for numerous indoor applications. Three laser crosses at 90 to each other. Laser cross to the ceiling. Plumb down beam to the floor Power Supply 3 x 1.5V AA Batteries Self Levelling Range ± 3-5 Laser Diode Red 650nm Accuracy ± 2mm / 10m Working Range Ø 30m Operating Time 24h Temperature Range -10 C - +40 C Laser Class 2 Weight 0.74kg * Depending on room illumination Multi-Pointer Laser Part No Order Qty RL5W Multi Pointer Laser 1 Multi-functional mount, magnetic target, strap attachment, batteries & hard case Electrician Partitioners Alignment of drywall 4 Planning, layout for 4 fixtures & fittings 5 ways gives user more measurements without repositioning the laser, and is easily re-calibrated High accuracy delivers a better finish and reduces time spent on site Strong magnetic base plate allows laser to be set up where ever it is needed quickly and accurately Laser target helps operator use laser in high ambient light Ease of operation provides less chance of inaccurate readings Related Accessories Universal Tripod Wall and Ceiling Mount Floor to Ceiling Pillar Stave 55 www.ramset.com.au 1300 780 063

Cross Beam Laser RLCL - Interior Applications NEW Detachable multi functional mount High specification red 635nm laser diode Locking mechanism for safe transport Laser Devices Robust and handy high powered cross level laser for horizontal and vertical levelling and aligning Power Supply 3 x 1.5V AA Batteries Self Levelling Range ± 4 Laser Diode Red 635nm Accuracy ± 3mm / 10m Working Range without Receiver Ø 20m* Working Range with Receiver Ø 30m Operating Time 48h Temperature Range -10 C - +45 C Dust and Water Protection IP54 Laser Class 3R Weight 0.8kg * Depending on room illumination Cross Beam Laser Part No Order Qty RLCL Cross Beam Laser 1 Multi-Functional mount, magnetic target, set of batteries and padded carry case Plumber Electrician HVAC Conduit, Trunking, 4 Switches, Sockets Pipes 4 Cables & Radiators 4 High specification diodes for optimum visibility of laser lines Detachable multi-functional mount to fit 5/8 or 1/4 thread Strong and side magnets for easy positioning on steel structure Pulse function for use with receiver Locking device for safe transport Visual and audible alarm when out of level Related Accessories Universal Tripod Wall and Ceiling Mount Floor to Ceiling Pillar Stave www.ramset.com.au 1300 780 063 56

Distance Meter RLM50 - Interior & Exterior Applications Robust lightweight design Laser Devices IP54 dust and water protection The RLM50 provides fast and accurate measurement of lengths, area and volume on the job site. Suitable for all trades it saves time and money. Power Supply 4 x AAA batteries Laser Diode 635nm<1mW Accuracy ± 1.5mm Measuring Range 0.05-50m Measurement Time 0.5sec/min - 4.0 sec/max Laser Diameter 6mm@10m/30mm@50m Dimensions 100x58x32mm Laser Class 2 Dust and Water Protection IP54 Weight 180g Distance Meter Part No Order Qty RLM50 Laser Measurer 1 Remote control, floor mount, magnetic target, rechargeable battery / charger and carry case Robust lightweight design Allows pin head accurate measurements to be taken from difficult to get to positioning Automatic switch off conserves battery power (5min tool/30s laser) IP54 dust and water resistance Builder Plumber Electrician HVAC Ceiling & Partitioners Measuring Distances 4 4 4 4 4 57 www.ramset.com.au 1300 780 063

Laser Accessories Tripod A strong, durable and reliable aluminium tripod that is ideal for use with all laser measuring devices. Robust aluminium construction Quick clamp system Shoulder carrying strap Tripod Head: Tripod Head Dia: Size: Weight: Flat Head 158mm 105 170 cm 5.1kg Part No. RLTP Aluminium Laser Tripod Floor to Ceiling Pillar A floor to ceiling pillar for use indoor use to set and adjust the height positioning of a laser device. Pillar is made up of 5 sections 5/8 and 1/4 adaptor The individual; poles are equipped with 5/8 threads to enable them to be mounted on a tripod should no ceiling surface be available. Supplied with a carrying bag. Laser Devices Maximum Length: 3.4m Part No. RFSP Floor to Ceiling Pillar Wall & Ceiling Mount A robust mount for use with all Ramset lasers on walls and ceilings. Ideal for indoor uses such as setting out suspended ceilings. Precise adjustment / alignment with large slow motion wheel Graduation - cm / inch Supplied with a carrying bag. Platform Size: 150 x 95mm Part No. RWCM Wall and Ceiling Mount 1 metre extension rods available on request Telescopic Leveling Staff A strong fully adjustable aluminium staff for easy reading of levels. Silver anodised finish Fully adjustable Secure snap-in at each metre. Front side cm-e graduation throughout total length Reverse side graduation in mm for height measurements. Maximum Height: 5m Part No. RST5 Laser Measuring Staff 5m www.ramset.com.au 1300 780 063 58

Sales, Orders and Enquiries Tel: 1300 780 063 Fax: 1300 780 064 Email: Web: enquiry@ramset.com.au www.ramset.com.au HEAD OFFICE 296-298 Maroondah Highway Mooroolbark, Victoria 3138 Tel: 03 9726 6222 STATE BRANCHES VICTORIA 5/71 Victoria Crescent, Abbotsford 3067 296-298 Maroondah Highway, Mooroolbark 3138 SOUTH AUSTRALIA 115 Sir Donald Bradman Drive, Hilton 5033 NEW SOUTH WALES 71 Carnarvon Street, Silverwater 2128 563 Gardeners Road, Mascot 2020 3/8 Channel Road, Mayfield West 2034 ACT 5/19 Tennant Street, Fyshwick 2609 ITW Construction Systems Australia Pty. Ltd. ABN 48 004 297 009 trading as Ramset. Trademarks of Cetram Pty. Ltd. used under licence by Ramset Copyright 2010 RAM/PT10/2010 QUEENSLAND 281 Montague Road, West End 4101 153 Ingham Road, Townsville 4810 WESTERN AUSTRALIA 1/12 Colin Jamieson Drive, Welshpool 6106 In the interests of product improvement, Ramset reserves the right to alter product specifications as required. Information included in this Product Catalogue is correct at time of printing. It is the responsibility of the user to ensure product selected is appropriate for its intended use. For further technical information go to www.ramset.com.au or contact Ramset on the numbers indicated.