SAWS LR-88.5 Meets OSHA 1910.269 Overall Length 88.5" LR-75 Overall Length 75" LR-62.5 Overall Length 62.5" HYD. LONG REACH CHAIN SAW 96 Hoses & fittings are available from Reliable Equipment. Consult your representative when ordering to ensure compliance with all safety requirements. REL-LR-SS - LR SAW SCABBARD Handle Clip Ratchet Straps Scabbard Fits All Reliable Long Reach Chainsaws IF YOU DON T SEE WHAT YOU NEED CONTACT RELIABLE EQUIPMENT 800-966-3530 LR-88.5, LR-75, LR-62.5 HYDRAULIC LONG REACH CHAIN SAW Reliable s LR-SERIES long reach chainsaws are intended for safely cutting and trimming trees from the ground or an aerial bucket. The powerful hydraulic drive motor can easily make cuts up to 13 inches in diameter. With an overall length up to 88.5 inches, the operator may easily reach areas not possible with a standard chain saw. The dielectric property of the fiberglass extension tube will reduce the chance of electric shock when used near an energized electric line. Other features include a trigger guard to prevent accidental movement of the chain, a covered sprocket guard, and a rubber collar hand stop. A quick set spool can be turned 180 º for closed center/ open center operations. REL-SAWS Cutting Capacity 13 in. Weight 9.5 lbs. 5-8 gpm Cutting Chain @ 8gpm 4,200 fpm Operating Pressure 1,000-2,000 psi Pressure Port Thread 9/16" - 18 SAE O-ring Return Port Thread 3/4-16 SAE O-ring Chain Size 325 in. pitch Chain Gauge 0.058 in. QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION LR-CS-82 Meets OSHA 1910.269 SAWS LR-CS-82 HYDRAULIC LONG REACH CIRCULAR SAW Reliable s LR-Series long reach saws are intended for safely trimming trees from the ground or an aerial bucket. With an overall length up to 81 inches, the operator may easily reach areas not possible with a standard chain saw. The offset head provides a flush cut, from a comfortable stance, reducing operator fatigue and strain. FEATURES: Insulated fiberglass extension tube reduces risk of electrical shock when used near an energized line Powerful hydraulic drive motor and 9" blade can cut branches up to 3.5 inches in a single pass Quick Stop System - reduces blade coast time Trigger Guard - prevents accidental blade activation Quick Set Spool - may be turned 180 º for open center or closed center operation Rubber Collar Hand Stop REL-CS16 HYDRAULIC CHAIN SAW The REL-CS16 hydraulic chain saw is the perfect tool for line clearance, right of way, pruning, and tree removal applications. At around half the weight of gasoline chain saws This workhorse boasts more power to the pound, a 16 inch cutting capacity, a powerful motor, selector control for Open- and Closed- Center systems, and a reduced kickback bar and chain. The chain and bar are adjustable without removing the sprocket cover. The automatic chain oiler can be adjusted without tools. The sprocket cover can be easily removed for saw cleaning. 8-3/8F50F-S Adapters 6-3/8F50F-S FF-370-6FP Coupler Set Optional bar sizes available. Consult factory. R29201 Bar R29200 Chain REL-CS16 5-8 gpm Pressure Port Thread & Return Port Thread #6 & #8 SAE Operating Pressure 1,000-2,000 psi Weight 9.3 lbs. Length 82 inches BLADE Part Number 34356 Speed 5,400 RPM @ 6 gpm Blade Diameter 9 inches Blade Thickness 1/16 inch Arbor 0.635 in x 0.878 in. Cutting Capacity Weight System Operating Pressure Pressure Port Thread Return Port Thread Chain Size Chain Gauge REL-CS16 16 in. 9.5 lbs. 4-8 gpm Open- or Closed- Center 1,000-2,000 psi 9/16" - 18 SAE O-ring 3/4" - 16 SAE O-ring 3/8 in. pitch 0.050 in. REL-CS16 SAFETY FEATURES: Reduced Kickback Bar and Chain Two Step Safety Trigger Chain Catcher (stops chain rotation) Front Handle Shroud (protects hands and knuckles) Rear Handle Guard (protects hands and knuckles) HYD. TRIMMER & CHAIN 97
SAWS HCS816 - CHAIN SAW - STANDARD Ideal for large trimming & cut-up applications Super Spool selector control for Open- and Closed-Center systems Automatic chain oiler 16" bar with adjustable bar angle Rugged gear motor Safety Features: two-step trigger, wide trigger guard, knuckle guard, sprocket guard, and anti-kickback chain Weight: 9.5 lbs. Length: 31.75 Width: 10 HCS816 HCS816 Cutting Capacity 15 in. Bar Length 16 in. 4-8 gpm Operating Pressure 1,000-2,000 psi Pressure Port Thread 9/16-18 SAE O-Ring Return Port Thread 3/4-16 SAE O-Ring Chain Size 3/8" pitch Bar Gauge 0.05 in. BAR LENGTH DESCRIPTION BAR & CHAIN GAUGE CHAIN & SPROCKET PITCH PART NUMBER BAR CHAIN SPROCKET 16" 0.050" 3/8" 90551419 50419600 90551036 20" 0.050" 3/8" 90551850 90551915 90551036 HYD. CIRCULAR / CHAIN CO25 - CUT-OFF SAW The Stanley CO25 Cut-Off Saw is used for metal or concrete cutting. The CO25 uses standard 14 inch (355.6 mm) abrasive or wet or dry diamond blades. It comes standard with an internal blade brake and water attachment porting (quick couplers not included). 7-9 gpm (26-34 lpm) operating range. 4-3/4 inch (120.6 mm) deep maximum cut. Adjustable wheel guard. HYREVZ gear-type motor. Flow regulator to prevent overspeed. Safety trigger. ACCESSORIES: 69704: Water Tank for 69290 Slab Saw Cart 34175: Handle Extension Kit 02691: 14 In. Abrasive Wheel for Metal, 1 In. Arbor 02692: 14 In. Abrasive Wheel for Masonry, 1 In. Arbor 62358: Diamond Blade, 14 In. Dry Cut 33228: Water Attachment for C025 69290: Slab Saw Cart CO25 62358 Diamond Blade, 14 in. Dry Cut 98 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION BAR & CHAIN COMBINATIONS FROM 15 TO 20 SAWS SAFETY TRIGGER Sealed for UNDERWATER Applications REL-HDS-20 20" HEAVY DUTY HYDRAULIC DIAMOND BLADE CHAIN SAW The REL-HDS-20 hydraulic chain saw has broad applications in underwater construction and deconstruction, as well as Municipal, D.O.T., and utility construction at the surface. The REL-HDS-20 has been designed to utilize Diamond Impregnated Chain to cut concrete, ductile iron, rebar reinforced concrete, and a variety of other substrate materials above and below the waters surface. A variety of bar and chain sizes and types help to adapt this tool for your application. Whether you are cutting a footer, foundation, or water main; Square off the end cut on a retaining wall, or dive in and plunge cut through a sea wall, the REL-HDS-20 will put the power to get the job done in the palm of your hand. REL-COS-14 14" HYDRAULIC CUT-OFF SAW GUARD METAL OR MASONRY Water Attachment Kit Included Shown with optional REL-370-6FP Couplers Sealed for UNDERWATER Applications A variety of blades and abrasive wheels, allow the REL-COS-14 to cut Metal, Masonry and More. The saw rotates counter clockwise to direct waste away from the operator. Cut dry or use the included water attachment kit. The REL-COS-14 will compliment any Utility or D.O.T. inventory. CUT CONCRETE DUCTILE IRON & MORE... WATER KIT INCLUDED REL-HDS-20 Capacity 15-20 (38-45 cm) Bar Chain Type 3/8 Pitch - Diamond Impregnated Pressure 1,000 to 2,000 psi 70 to 140 bar 7-9 gpm / 26-34 lpm Optimum Flow 8 gpm / 30 lpm System Open Center Lubrication/Cooling Internal Water Distribution Porting Length 35-43 / 89-110 cm (varies w/ chain & bar selection) Width 9.5 / 25 cm at handle Tool Weight 29 lbs./ 13 kg (varies w/ chain & bar selection) The Bar and Chain are NOT included with saw. Bar and Chain options will vary to meet the requirements of your application. Consult your Reliable representative. Capacity Pressure Optimum Flow Speed Porting Connector System Type Weight Length Width REL-CO-14 Up to 14 Circular Blade/Wheel 1,500-2,000 psi 105-140 bar 7-9 gpm / 26-34 lpm 8 gpm / 30 lpm (2,700 rpm) 4,700 rpm (Max.) 8 SAE O-ring 3/8 adapters (x2) Open Center, HTMA Type II 20 lbs. / 9 kg 21 inch / 53 cm 11 inch / 28 cm HYD. MASONRY & METAL 99
SAWS FS20 Flat Saw S16 HydraSaw HYDRAULIC CIRCULAR HYDRASAWS RGC HydraSaws use hydraulic direct drive power to maintain constant cutting speeds and torque without belts, pulleys, excessive noise or exhaust fumes. Because the HydraSaw operates in a closed system it is virtually maintenance free. These saws are available in 14", 16", 20" and 24" models. The TS14 Trench Saw is ideal for foundation work and jobs in close quarters. With the FS20 it is possible to cut flush to a perpendicular surface, making it ideal for wall corner cutting. Use the FS20 with the Upright Handle attachment for easy wall cutting at the floor level. This combination is also the right choice for curb cutting. FEATURES: 14", 16", 20", and 24" models available Cuts concrete, stone, brick, block, pipe, reinforced concrete, steel and aggregates quickly and cleanly Lightweight, rugged steel tube construction is lighter than gas saws Heavy duty protective guard meets ANSI standards Cuts vertically, horizontally and underwater Dual function trigger for automatic wet cutting Accepts abrasive or diamond blades Wall Mounted HydraSaw Guide available Use inside or outside with no exhaust pollutants Hydracarts and Saw Carts available for floor and slab cutting HYDRAULIC CIRCULAR S14 TS14 S16 S20 S24 FS20 Blade Size 14 in. 14 in. 16 in. 20 in. 24 in. 20 in. Cutting Depth 5.25 in. 5.25 in. 6 in. 7.5 in. 9.5 in. 8 in. Blade Speed 4100 rpm 4100 rpm 2750 rpm 1830 rpm 1455 rpm 1830 rpm Flow 5-8 gpm 5-8 gpm 5-8 gpm 5-8 gpm 5-8 gpm 8 gpm Pressure Range 2000-2500 psi 2000-2500 psi 2000-2500 psi 2000-2500 psi 2000-2500 psi 2000-2500 psi Weight 28 lbs. 30 lbs. 39 lbs. 52 lbs. 52 lbs. 54 lbs. HydraCart HydraCart with S20 HydraSaw SawCart SawCart with S14 HydraSaw SAW CARTS AND HYDRACARTS When the job requires more precise floor cutting over a longer distance, the RGC HydraCart is the perfect companion for our HydraSaws. The HydraCart greatly reduces operator fatigue while enhancing cutting control. FEATURES: Ideal for continuous, straight cutting in roadways, driveways, sidewalks, and warehouse floors Cart mounting for precise control and less operator fatigue Rugged one-piece steel frame construction Folding handles and removable ballast box for easy transporting Control console at operator s fingertips, including depth-of-cut indicator and locking device Accommodates 14", 16", 20", and 24" HydraSaw models The light-duty SawCart is also available for 14" & 16" HydraSaws 100 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION MINISAW The RGC MiniSaw is about 1/3 the weight of a full size chain saw The versatile MiniSaw makes clean, fast, precise, and straight cuts through concrete, reinforced concrete, masonry, stone and various aggregates. The MiniSaw can be run from an RGC HydraPak or any other compatible hydraulic power supply. Makes plunge, bottom, notch, trim, and corner cuts with no overcutting Choice of chain types and 13 or 15 cutting depths Diamond cutting segments are laser welded to a high carbon steel chain chasis Dual-function trigger starts and stops tool and water flow simultaneously for convenience and operator safety Lightweight aluminum frame is ergonomically designed to enhance cutting precision while reducing operator fatigue Roller nose sprocket extends chain and bar life Water flow system delivers maximum lubrication, cooling, and abrasion flushing through eight internal bar channels Hydraulically powered In-Line pump is available to assure adequate water supply MiniSaw SAWS HYDRACUTTER C150 This rugged, versatile saw makes clean, fast, precise, and straight cuts through concrete, reinforced concrete, masonry, stone and aggregate. Newest features include a cast aluminum frame, redesigned valve, water drain and a choice of 8 gpm or 12 gpm hydraulic motors. Makes plunge, bottom, notch, trim, and corner cuts with no overcutting Diamond Cutting Segments are laser welded to high carbon steel chains Dual-function trigger starts and stops tool and water flow simultaneously for convenience and operator safety Lightweight, ergonomic design with cushioned handles and balanced weight distribution enhances precision cutting with minimal force reducing operator fatigue & improving productivity Roller nose sprocket extends chain and bar life Water flow system delivers maximum lubrication, cooling, and abrasion flushing through internal bar ports Tapered bar design transmits increased power to the nose, reducing chain wear during plunge cuts Hydraulically powered In-Line pump is available to assure adequate water supply MiniSaw w/ 13 in. Bar MiniSaw w/ 15 in. Bar C150-8 w/ 15 in. Bar C150-8 w/ 20 in. Bar C150-12 w/ 15 in. Bar HydraCutter C150 C150-12 w/ 20 in. Bar C150-12 w/ 30 in. Bar Cutting Depth 13 in. 15 in. 15 in. 20 in. 15 in. 20 in. 30 in. Bar Size 15 x 2.25 in. 17 x 2.25 in. 22.3 x 4 in. 26.5 x 4 in. 22.3 x 4 in. 26.5 x 4 in. 34.8 x 4 in. Flow 8 gpm 8 gpm 8 gpm 8 gpm 12 gpm 12 gpm 12 gpm Pressure Range 2000-2500 psi 2000-2500 psi 2000-2500 psi 2000-2500 psi 2000-2500 psi 2000-2500 psi 2000-2500 psi Water Flow 2.5 gpm @ 50 psi 2.5 gpm @ 50 psi 2.5 gpm @ 50 psi 2.5 gpm @ 50 psi 2.5 gpm @ 50 psi 2.5 gpm @ 50 psi 2.5 gpm @ 50 psi Weight 16 lbs. 16 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. HYDRAULIC MASONRY 101
SAWS BATTERY SAWS STIHL battery-powered chainsaws bring the best of both worlds to you. First, they deliver strong, consistent power thanks to their 36-volt Lithium-Ion technology. They re also significantly quieter than gasolinepowered chainsaws and start instantly with the squeeze of a trigger. It s lightweight and features low vibration, quick chain adjustment and STIHL Quickstop Plus chain braking feature. It also comes with the exclusive 1/4" STIHL PICCO saw chain custom designed for use on STIHL battery-powered chainsaws. MSA 120 C-BQ MSA 120 C-BQ / MSA 120 C-BQ BUNDLE The MSA 120 C-BQ is your new go-to chainsaw for storm cleanup or limb removal. MSA 160 C-BQ MSA 200 C-BQ MSA 160 C-BQ Each charge of the AP 300 Lithium-Ion battery gives you up to 50 minutes of cutting time for storm cleanup, carpentry tasks and firewood cutting. Batteries and chargers must be purchased separately. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on. MSA 200 C-BQ The STIHL MSA 200 C-BQ is a cordless chainsaw tough enough to carry the name STIHL. Batteries and chargers must be purchased separately. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on. BATTERY CHAIN SAWS AP 300 LITHIUM-ION BATTERY All STIHL batteries are based on 36-volt Lithium-Ion technology. The AP 300 keeps more than 80% of its capacity after 500 charges. Features specialized voltage monitors and temperature sensors to help ensure optimal operation and a long service life. (Weight: 3.8 lbs.) AL 300 RAPID BATTERY CHARGER Charges STIHL Lithium-Ion batteries in approximately 25 minutes*. Features an onboard cooling fan and bright LED display to indicate current charge level. This smart charger switches off automatically once your battery is fully charged. MSA 120 C-BQ MSA 160 C-BQ MSA 200 C-BQ Guide Bar Lengths (Recommended Ranges) 10 in. or 12 in. 10 in. or 12 in. 10 in. to 14 in. Oilomatic Chain 1/4" STIHL PICCO 1/4" STIHL PICCO 1/4" STIHL PICCO *Run Time (w/ AK 20) Up to 35 minutes Up to 50 minutes Up to 45 minutes Weight (w/o AK 20) 4.8 lbs. 6.8 lbs. 7.3 lbs. Weight w/ AK 20 8.4 lbs. 10.6 lbs. 11 lbs. *Usage claim tested and verified by an independent third-party test laboratory. Run time may vary based on battery type, charge level and capacity, model, operating style and conditions. 102 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION MS 241 C-M A compact, lightweight chainsaw with professional-grade power and STIHL M-Tronic technology. For professionals who need power without the bulk, the MS 241 C-M chainsaw is an agile, fuel efficient, low-exhaust operation, and easy-to-operate package. MS 241 C-M SAWS MS 362 C-M A compact, lightweight chainsaw with professional-grade power and STIHL The MS 362 chainsaw plus our exclusive STIHL M-Tronic engine management technology. Brains and brawn come together in this well-rounded professional chainsaw. MS 661 C-M The MS 661 C-M chainsaw also delivers less vibration and 20% greater fuel efficiency than the MS 660. Other features include a long-life filter system using HD-2 filter elements to provide longer run times between maintenance, an ElastoStart handle, and a high output adjustable oiler. Wrap-handle version available in select areas. MS 362 C-M MS 661 C-M Shown with optional lightweight guide bar. MS 170 MS 170 is the perfect lightweight chainsaw for owners seeking a great value. Compact, lightweight with just the right amount of power, the MS 170 makes quick work of trimming or cutting small trees, fallen limbs after a storm, and other tasks around the yard. And even at its great price, the MS 170 has many of the same design features the professionals depend on. (Reliable standard w/ 16" bar) MS 241 C-M MS 362 C-M MS 661 C-M MS 170 Guide Bar Lengths (Recommended Ranges) 12 in. to 16 in. STIHL ROLLOMATIC E 16 in. to 25 in. STIHL ROLLOMATIC 16 in. to 32 in. STIHL ROLLOMATIC E Super MS 170 12 in. to 16 in. STIHL ROLLOMATIC Displacement 42.6 cc (2.6 cu. in.) 59.0 cc (3.6 cu. in.) 91.1 cc (5.56 cu. in.) 30.1 cc (1.8 cu. in.) *Engine Power 2.3 kw (3.1 bhp) 3.5 kw (4.69 bhp) 5.4 kw (7.2 bhp) 1.3 kw (1.7 bhp) GAS CHAIN SAWS Powerhead Weight 9.9 Ibs. Flush-Cut: 12.35 lbs. Wrap-Handle: 13.2 lbs. Flush-Cut: 16.3 lbs. Wrap-Handle: 16.8 lbs. 8.6 lbs. Fuel Capacity 12.5 oz. 20.3 oz. 27.9 oz. 8.5 oz. OILOMATIC Chain 63 PS3 3/8" RS3 33 RS3 3/8" PMM3 Chain Oil Capacity 207 cc (7.0 oz.) 325 cc (11.0 oz.) 360 cc (12.2 oz.) 145 cc (4.9 oz.) *Features our exclusive STIHL M-Tronic engine management technology. This innovative microprocessor-controlled engine management system optimizes engine performance and compensates for changes in operating conditions, such as temperature, elevation, fuel quality, and dirty air filters. 103
SAWS BATTERY CUT-OFF MACHINE STIHL introduces the world s first battery cut-off machine, powered by 36-volt Lithium-Ion technology. In addition to being powerful, it produces zero exhaust emissions you can even use it indoors. It is also lightweight, offering more portability on the jobsite. Add it to your battery-powered lineup today and discover the many benefits of owning STIHL battery. TSA 230 Note: Batteries and chargers must be purchased separately. TSA 230 STIHL introduces another world s first a cut-off machine powered by 36-volt Lithium-Ion battery technology. The TSA 230 STIHL Cutquik cut-off machine starts instantly and changes the game for the jobsite, delivering maneuverability and solid cutting performance in a lightweight, compact package that can be used indoors. Its onboard water control helps suppress dust while a toolless wheel lock prevents wheel rotation when removing the wheel attachment bolt. And because it is battery powered, there is no air filter to maintain. The TSA 230 even provides great value priced below its gasoline-powered counterpart. Groundbreaking innovation, grounded in quality engineering. BATTERY CUT-OFF SAWS B10 Diamond Wheel - Economy Grade Available in 12, 14 and 16 diameters. TSA 230 Wheel Diameter 9 in. Cutting Depth 2.75" Run Time (w/ AP 300) Up to 18 min. Weight w/o Battery & Wheel 8.6 lbs. Weight w/ AP 300 12.3 lbs. AP 300 LITHIUM-ION BATTERY The AP 300 battery features 28% more power than the AP 180, while remaining the same weight (3.8 lbs.). And all STIHL batteries are based on 36-volt Lithium-Ion technology. The AP 300 keeps more than 80% of its battery capacity after 500 charges. It even features specialized voltage monitors and temperature sensors to help ensure optimal operation and a long service life. AL 300 RAPID BATTERY CHARGER The STIHL AL 300 rapid battery charger fits that bill perfectly. Charges STIHL Lithium-Ion batteries in approximately 25 minutes*. It features an onboard cooling fan and bright LED display to indicate current charge level. This smart charger even switches off automatically once your battery is fully charged. STIHL CUTQUIK CART The STIHL Cutquik Cart is specially designed for use with STIHL cut-off machines when cutting expansion cuts or curbs and a wheeled tool is necessary. This cart offers improved handling and cutting performance with a forward weight orientation and a toolless quick connect system. The cart also features a large deflector as well as sealed bearing wheels to help keep out dust and debris. The handle folds for easy transport, making this lightweight, compact and portable cart an ideal accessory to anyone that uses a cut-off machine. Designed to fit STIHL TS 420, TS 480i, TS 700 and TS 800 cut-off machines. Note: A mounting kit will be required to mount the TS unit to the cart. 104 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION TS 420 STIHL CUTQUIK A 14 cutting wheel puts this cut-off machine in the big leagues of performance, efficiency and ease of use. The TS 420 is so popular, it could possibly be called the standard to which other cut-off machines are compared. Users like it because it is compact, lightweight, and reliable. NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately. TS 420 STIHL Cutquik SAWS TS 480I STIHL CUTQUIK The TS 480i STIHL Cutquik cut-off machine features an electronically controlled fuel-injection system. Powerful, lightweight and well-balanced, designed for superior handling (maximum wheel size is 12 inches). With low exhaust emissions, the engine provides optimal torque throughout the RPM range and eliminates the need for a choke, simplifying the starting procedure. The standard electronic water control feature allows for easy and efficient water flow adjustment while operating. TS 480i STIHL Cutquik TS 700 STIHL CUTQUIK The 14 STIHL TS 700 cut-off machine is the powerhouse of the STIHL line. Designed for superior handling during the toughest jobs, this machine features a powerful, high-speed engine, large fuel capacity, five-point dual element vibration control system built right into the handle, and a semi-automatic belt tensioner with an innovative ribbed belt. NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately. TS 800 STIHL CUTQUIK Features a magnesium guard making the machine a full 0.7 pounds lighter than the previous model. The TS 800 features a 16 cutting wheel, the largest size we offer in a handheld design. When used with the optional STIHL Cutquik cart, the TS 800 is an excellent alternative to conventional walk behinds because it can be used as a handheld or quickly snapped into our cart for long, straight, controlled cuts. It s also fuel efficient, with enough power to cut through asphalt, concrete, rebar, iron and steel with ease. TS 700 STIHL Cutquik TS 800 STIHL Cutquik TS 420 STIHL Cutquik TS 480i STIHL Cutquik TS 700 STIHL Cutquik TS 800 STIHL Cutquik Displacement 66.7 cc (4.07 cu. in.) 72.2 cc (4.41 cu. in.) 98.5 cc (6.0 cu. in.) 98.5 cc (6.0 cu. in.) Engine Power 3.2 kw (4.4 bhp) 3.9 kw (5.2 bhp) 5.0 kw (6.7 bhp) 5.0 kw (6.7 bhp) *Weight 21.2 lbs. 22.0 lbs. 25.6 lbs. 28 lbs. Fuel Capacity 24 oz. 24.5 oz. 40.6 oz. 40.6 oz. Engine Speed 9,000 rpm 9,000 rpm 9,300 rpm 9,300 rpm Max. Spindle Speed 5,350 rpm 5,350 rpm 5,350 rpm 4,600 rpm Arbor Size 20 mm 20 mm 20 mm 20 mm Max. Wheel Size 14" 12" 14" 16" Max. Cutting Depth 4.9" 3.9" 4.9" 5.6" X2 Filtration System X X X N/A *Weight includes water attachment and guard. Shown with optional STIHL diamond wheel. **X2 filtration system is low maintenance and cleans airflow, reducing downtime for filter maintenance. GAS CUT-OFF SAWS 105