Butterfly Valves Quality Valves at Low Cost
About Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and gas, mg, process, chemical and general dustries, and the reason Flow+ remas a leader when it comes to your valve needs. Our growg product le ranges from: 1, 2, and 3 piece ball valves, known as our B Series. Floatg flanged ball valves offered 1, 0 and 600 pressure classes, known as our Z Series. Trunnion ball valves, known as our T Series. A wide variety of butterfly valves, known as our BF Series. Straers and check valves. Valve position monitors. For more details, please visit www.flowplusvalves.com Certified to NSF/ANSI 61 CRN Table of Contents Butterfly Valves 2 to Butterfly Valve BFW & BFL Series... 3 1 to Butterfly Valve BFW & BFL Series... 4 2 to 4 Butterfly Valve BFD Series... 5 Cv Value and Technical Information... 6 Actuator formation SPNII Actuator Information... 7 Actuation Selection Chart... 7 Additional Information Flow+ Terms and Conditions... 8 Part Numberg System 1 2 3 4 5 1 = Size 02 = 2 25 = 21/2 03 = up to 2 = Style A = Wafer (ANSI 125/1) B = Wafer (ANSI 125/1) (DIN PN10/PN16) C = Lug (ANSI 125/1) D = Double Flanged 3 = Body 1 = Cast Iron 2 = Ductile Iron 4 = Pressure 0 = 2 PSI (2 ) 2 = 285 PSI (2 ) 4 = 2 PSI 8 = 125 PSI (2 and up) 5 = Disc 2 = Nickel Plated Ductile Iron 3 = Alumium Bronze 4 = 316SS 5 = Alloy 6 = Monel 7 = Hastelloy C 8 = Nylon Coated Ductile 9 = PTFE Coated 316SS 6 7 8 9 10 6 = Shaft 1 = 416SS / 431SS/4SS 4 = 316SS 5 = 174SS 7 = Bushgs 0 = Bronze 3 = PTFE 8 = Seat/Ler 1 = BunaN 4 = EPDM / NSF61 5 = EPDM 6 = Viton 8 = Hypalon 9 = PTFE Le EPDM (125 PSI Rated Only) 9 = Actuator 3 = Lockable Handle (2 ) 5 = Gear Operator 6 = Double Actg Actuator 7 = Fail Close Actuator 8 = Fail Open Actuator 9 = Electric Actuator C = Buried Gear / 2 Nut U = Cha Wheel X = None 10 = Special Features 0 = Custom Product 2.
2 Butterfly Valve Maximum Workg Pressure 2285 PSI BFW & BFL SERIES Body Disc Shaft Bushg Seat/Ler Materials Ductile Iron Cast Iron* Carbon Steel* Staless Steel* Ductile Iron Nickel Plated 316 Staless Steel Alumum Bronze* Alloy * Monel* Hastelloy C276* 316 Staless Steel 416 Staless Steel 174 Staless Steel Bronze* PTFE BunaN Viton PTFE Led EPDM (125 PSI Rated Only) EPDM Hypalon* *Optional equipment. ASTM A395 A126B A216 A351CF8M A395ENP A351CF8M A33910 A351CN7M A494M35 A494CW6M A182F316 A582 A564 B62 N/A Temperature (both F and C) 0 1 F (18) C 0 400 F (18) 4 C 0 2 F (18) 4 C () 275 F (35) 135 C () 0 F () 90 C 1. 4. 3. 2. 8. 8. 7. 7. 6. 5. 9. Size 2 2. Lever Gear A 4 6 213 2 4 257 6 3 4 414 B 89 98 104 123 1 147 184 184 212 255 C 1.5 139.5 152.5 0.5 216 1.5 8.5 8.5 2 4 D 25 25 nd /811UNC2B /811UNC2B /811UNC2B 85/811UNC2B 83/410UNC2B 83/410UNC2B 83/410UNC2B 83/410UNC2B 127/89UNC2B 127/89UNC2B E 85.2 98.6 107.8.9 82.7.4 114.2 114.2 93.7 111.8 Additional formation Available wafer or lug body Consult supplier for vacuum service Standard deadend service for lug style with downstream flange removed Compatible with ASME 125/1 flanges Applicable standards: API609, MSSSP67, tested per API598, CRN, Certified NSF/ANSI 61 Seats are field replaceable All valve bodies are epoxy coated Lockg lever handle with 10 position notch plate on sizes 2 to gear operator available on request L.1 49.1 48.4 55.3 58.8 59.1 64.1 64.1 71.8 81 W 261.5 261.5 261.5 261.5 4 4 4 0 0 0 *Units of measurement millimeters. For DIN dimensional data, contact a Flow+ supplier. 8. 2. features 1. ISO5211 mountg flange allows for easy actuation 2. 174PH SS blowout proof shafts 3. A395 ductile iron body 4. Bubble tight and bidirectional up to 2 PSI 5. Cartridge seat with a phenolic backg provides a dimensionally stable seatg surface, mimal seat wear and extends seat life 6. Two molded primary shaft seals on upper and lower seal bore I.D. 7. Three additional shaft seals 8. Two upper and one lower F4 bushg to provide additional support 9. Set screws to mata seat alignment on deadend service 6. 3.
1 Butterfly Valve Maximum Workg Pressure 2 PSI BFW & BFL SERIES Body Disc Shaft Bushg Seat/Ler Materials Ductile Iron Cast Iron Carbon Steel* Staless Steel* 316 Staless Steel Alumum Bronze* Alloy * Monel* Hastelloy C276* 316 Staless Steel 416 Staless Steel Bronze* PTFE BunaN Viton PTFE Led EPDM (125 PSI Rated Only) EPDM Hypalon* ASTM A395 A126B A216 A351CF8M A351CF8M A33910 A351CN7M A494M35 A494CW6M A182F316 A564 B62 N/A Temperature (both F and C) 0 1 F (18) C 0 400 F (18) 4 C 0 2 F (18) 4 C () 275 F (35) 135 C () 0 F () 90 C A B ØW nd A ØC 4D L Ød *Optional equipment. Size 1 1 1 A 4 5 527 600 682 B 267 2 339 1 1 C 476 9.5 578 635 749.5 nd 1218UN2B 1611/88UN2B 1611/88UN2B 11/88UN2B 11/48UN2B L 79.5 102 114 127 156 W 0 0 0 0 0 *Units of measurement millimeters. For DIN dimensional data, contact a Flow+ supplier. B ØC Features Available wafer or lug body Bubble tight and bidirectional to 2 PSI Consult supplier for vacuum service Standard deadend service for lug style with downstream flange removed Compatible with ASME 125/1 flanges Applicable standards; API 609, MSSSP67, tested per API598, CRN Phenolic backed seat provides a dimensionally stable seat sealg surface, mimal seat wear and extends seat life Blowout proof design All valve bodies are epoxy coated ISO 5211 mountg flange allowg easy actuation. Gear operator with handwheel on sizes 1 Actuation available to suit any requirement 4.
BFD SERIES 284 Butterfly Valve ANSI Class 1lb Flanged End Parts Body ORg Bushg P Shaft Disc Seat Materials Cast Iron EPDM/BUNA PTFE Staless Steel Staless Steel Staless Steel EPDM/BUNA ASTM A126 Class B AISI 316 AISI 316 AISI 316 features The U type flange body style fits between a FF or a RF flange PTFE bushg to ensure the maximum shaft support and centralized alignment 0 polished disc assures positive shutoff hard back cartridge seat one piece shaft, pned and spled disc Universal ISO5211 mountg pad ø c H3 ø D1 ø D1 n ø d1 H1 H2 L Size L Ø D Ø D1 n Ø d1 H1 H2 H3 Ø c 2 4 700 900 900 1000 10 6. 7.48 7.99 8. 10 165 0 3 216 254 35. 44. 59.90 895 11 1168 13 1511 33.07 40.25.75 49.5 56 840 10 1086 1257 14 281.38 1.62 1.62 441.62 *Please contact a Flow+ supplier for formation on sizes over 4. 2835 41 41 4441.88. 25.08 27.56 33.23 5 565 6 700 844.57 26. 28.35 31..01 6 6 7 0 940 0 0 4.65 5.59 6. 118 1 160 2.48 2.48 2.95 3.35 4.13 63 63 75 85 105 5.
Cv Value Valve Sizg Coefficients Disc Angle Open 2 2. Valve Size 10o o o 40o o 60o 70o o 90o 0.1 5 12 15 27 44 70 105 115 0.2 8 25 75 1 178 6 0.3 12 23 39 70 116 183 275 2 0.5 17 78 139 2 4 5 600 0.8 61 133 2 3 6 9 10 2 95 5 6 605 958 14 1579 3 89 188 408 7 12 03 2854 31 4 151 0 694 12 49 40 4859 54 5 234 495 10 11 3162 05 77 82 6 338 715 1549 2761 68 10844 117 8 4 983 21 97 6282 99 14913 16388 14 791 1647 28 65 10698 16931 296 27908 CV Value USGPM water @ 70F passed through the valve with 1 PSI pressure drop. For sizes 2 and up, please contact a Flow+ supplier. 1 1 12 2587 5605 9989 16528 26157 3 43116 Technical Information Weights and Valve Sizes Weights Valve Size Bare Stem 2 2. 1 1 1 Wafer lb 6 7 10 13 18 70 95 117 165 275 440 kg 2. 3.18 4.54 5.90 8.16 9.07 14.51.05 31.75 43.09.07 74.84 1.74 9.58 Lug lb 7 8 14 26 28 31 49 105 155 5 2 396 610 kg 3.18 3.63 6.35 11.79 12.70 14.06.23. 47.63 703.1 88. 104.33 179.62 276.70 Lever Operated 2 2. Wafer lb kg 7.8 3.52 Lug lb 8.8 kg 3.98 Gear Operated 2 Wafer lb kg 33.1 15.02 Lug lb 34.1 kg 15.48 8.8 3.98 9.8 4.43 2. 34.1 15.48 35.1 15.93 11.8 5.34 15.8 7.15.1 16.84 41.1 18.65 14.8 6.70 27.8 12.59 40.1 18.2.1.09 For sizes 2 and up, please contact a Flow+ supplier..8 8.96.8 13.5.1. 55.1 25 21.8 9.87.8 14.86 47.1 21. 58.1 26.35 16.31.03 63.7 28.91.7.63.85 76 34. 73.7 33. 103.7 47.06 74 33.55 109 49.43 73.7 33. 103.7 62.03 1 1 126.7 57.49 186.7 84.71 1 1 4.4 88.27 2.4 123.65 1 1 2.4 110.04 7.4 139. 352.4 159.94 473.4 214.82 517.4 234.78 387.4 311.90 6.
SPNII Actuator Information Model Unit A B C D E F G H H1 H2 I J L 0 0 063 075 085 100 115 125 1 160 1 0 0 265 0 4.61 117 5.8 147 6.26 159 8.39 213 9.8 9 10.67 271 12.40 315 13.62 3 16. 412 17.44 443. 4 21.54 547.17 614 28.7 9 33.03 839 3.62 4.25 108 4. 125 5.43 138 5.94 151 6.89 175 7.48 0 8.25 210 9.06 2 9.96 2 10.91 277 13.7 348 15.31 389 16.14 410 0.88 1.35 34 1.67 2.01 51 2.27 58 2.5 64 2.85 3.09 78 3. 88 3.88 99 4. 109 4.8 1 5.75 1 6.57 167 6.99 178 0.88 1.12 28 1. 1.71 43 1.91 49 2.2 56 2.52 64 2. 69 3. 88 3.88 99 4. 109 5.14 131 5.79 147 6.38 162 0.88 1.61 41 1.14 2.07 2. 56 3.03 77 3.23 82 3.54 90 3.87 98 4.15 105 4.41 112 5.16 131 5.78 147 6.81 173 2.28 58 3.39 86 3.8 97 4.17 106 5.00 127 1 5.85 1.49 6.28 160 7.07 1 7.64 4 9.09 231 9.99 254 11. 0.88 1.02 26 1.03 26 1. 1.67 1.8 2.17 55 2.04 52 2. 60 2.76 70 3.54 90 3.35 85 1.57 40 1.57 40 1.57 40 0.39 10 0.47 12 0.63 16 0.75 0.75 0.91 23 0.91 23 1.14 1.14 1.14 1.34 34 1.34 34 1.34 34 1.89 48 1.89 48 2.56 65 2.56 65 2.56 65 3.62 3.62 3.27 3.27 3.27 1.25 1/ 3/ 3/ 1/2 1.4 Actuation Selection Chart Actuator Sizg Info** 2 2. Seatg Torque** 133 211 278 4 648 940 1510 89 Double Actg* 63DA 63DA 75DA 75DA 85DA 100DA 125DA 1DA Sprg Return* 75SR 75SR 75SR 85SR 115SR 125SR 1SR 160SR Model Unit M N P Q1 Q2 Q3 Q4 R S T U V W 28 1DA 160SR 0 0 063 075 085 100 115 125 1 160 1 0 0 265 0 1 1 1 1 1 F03 F04 F05 F05 F05 F07 F07 F12 F07 F07 F12 F12 F14 F14 F16 F16 F16 M12 M12 M16 M16 M M M M12 0.35 9 0.67 17 0.67 17 0.87 0.87 0.87 0.87 1. 1. 1. 1. 1. 1.81 1.81 1.81 3.9 99 3.9 99 1. 1. 1. 1. 2.09 2.09 1 00 160DA 0SR 1 00 0DA 0SR 1 9840 0DA 265SR 100 0DA 265SR 21840 265DA *** * Recoended SPN II piston pneumatic actuators have been sized based on PSI air supply and have been tested utilizg 1 PSI le pressure (water). Rubber seated valves only, contact Flow+ supplier for more formation. ** All torque values on chart are /lbs based on 1 PSI differential pressure and are for wet (water and other lubricatg media) onoff service. For dry service (nonlubricatg, dry gas media), multiply values by 1.5. *** Consult Flow+ supplier. **** For high or low temperature applications, consult a Flow+ supplier for special seal kits. For sizes 2 and up, please contact a Flow+ supplier. 7.
ValvSource Equipment Limited (here referred to as ValvSource ) is pleased to advise its customers ( Purchaser ) of Flow+ brand products ( Product or Products ) that the manufacturer ( Manufacturer ) warrants its Products agast defects material and workmanship ( Defects ) for a period of eighteen (18) months from shipment or one (1) year from stallation ( Warranty Period ). Purchaser acknowledges that the Products are provided to the Purchaser subject only to the limited warranties provided by the manufacturer of the Products and are subject to all of the conditions, limitations and exclusions set out there, all of which are hereby accepted by the Purchaser. Extent of Remedy. Where ValvSource is advised writg of Defects with the Warranty Period, Manufacturer will be deemed to have received notice of the defect and Manufacturer will, at its option, replace or recondition the Product without charge. Where a replacement or reconditioned Product is provided durg the Warranty Period, that Product shall be subject to the same warranty for the unexpired portion of the origal Warranty Period. This remedy shall constitute the exclusive remedy available to Customers for defective Products. Limitations. Neither ValvSource nor Manufacturer shall be liable for any cidental, consequential or other damages, costs or economic losses, cludg, without limitation, any resultg from labour charges, delays, vandalism, negligence, foulg caused by foreign material, damage from adverse water conditions, chemicals, acts of God, or circumstances that are not controllable or reasonably foreseeable by either Manufacturer or ValvSource. Invalidation of Warranty. The warranty exclusions clude, without limitation, (I) any defects caused by faulty stallation performed by Purchaser or third parties, (II) any damage caused by the contractors or tradesman of the Purchaser, (III) any damage caused by improper use or misuse, cludg exposure to excessive temperatures, moisture or cleang agents and solvents and (IV) any damage caused durg transportation or improper storage. All claims received by ValvSource beyond the Warranty Period are valid and shall not be accepted. Disclaimer. Except for the express written warranty contaed here, neither Manufacturer nor ValvSource makes any other warranty, condition, guarantee or demnity, express or implied, statutory or otherwise, regardg the Products INCLUDING WITHOUT LIMITATION, TO THE EXTENT PERMITTED BY LAW, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. All other warranties, conditions guarantees and demnities regardg any Products are hereby disclaimed, excluded and overridden. Further Warranty Information. For complete detailed terms of sale and warranty formation on all products distributed by ValvSource, cludg brands from third party manufacturers distributed by ValvSource, please visit: http://www.valvsource.com. Please refer to terms and conditions section. Flow+ is a registered trademark. Contact Information Your local Sales Representative: www.flowplusvalves.com Version 014