NICE Unground Industrial Product

Nice Ball Bearings

In 902, William Nice founded one of the first anti-friction bearing manufacturers. Starting with unground ball bearing types and progressing into fully ground types, NICE today produces a complete line of precision ground, semi-ground and, unground bearings and bearing assemblies. NICE is a leading manufacturer of high quality inch series and specialty ball bearings for the automotive, agricultural, lawn equipment, semiconductor, medical and material handling industries. NICE Precision Ground Product NICE Ball Bearings produces a complete line of high quality, competitively priced precision ground and semi-ground ball bearings. The standard bearings are manufactured in easy to use inch dimensions and are recommended for medium loads and speeds up to 5000 rpm. They are available with nylon retainers as standard. Steel and stainless steel retainers for many sizes can be supplied as an option. The precision ground products are also available in a variety of seal or shield combinations. Special needs including non-standard or metric dimensions and bearings made of various specialty steels can also be supplied. NICE Unground Industrial Product NICE Ball Bearings produces a complete line of unground radial, thrust and combination radial and thrust ball bearings for applications where the speeds are low and the precision of a ground bearing is neither required nor cost effective. These products are full ball complement designs featuring unitized assembly for ease of installation. The NICE Advantage U. S. Made - Manufactured in the United States, NICE products consistently offer high quality, fast delivery and low freight costs. Technical Support - A full staff of application and design engineers offers fast, efficient response to technical questions and solutions based new or special product designs. High Quality - NICE manufacturing facilities operate under a total quality system utilizing statistical process control, resulting in the consistent supply of high quality products. Superior Availability & Fill Rates - Utilization of a make to forecast planning process and domestic manufacture results in short lead times, high reliability and low freight costs. Sales Support - Sold exclusively by SKF/MRC, with sales offices located nationwide.

SELECTION GUIDE PRODUCT FEATURES 600 SERIES 3000 SERIES 6900 SERIES 7500 SERIES 7600 SERIES 400 SERIES 5000 SERIES 500 SERIES 600 SERIES ENG. DATA SPECIALS & APPS TABLE of Contents Product Selection Guide Product Features 600 Series Precision Ground Radial Bearings 3000 Series Semi-Ground Radial Bearings 6900 Series Semi-Ground Radial Bearings, Extended Inner with Flanged Housing 7500 Series Heavy Duty Precision Ground Radial Bearings 7600 Series Heavy Duty Precision Ground Radial Bearings with Extended Inner Ring 400 Series Single Row Unground Radial Bearings 5000 Series Single Row Unground Flanged Radial Bearings 500 Series Single Row Unground Combination Radial and Thrust Bearings 600 Series Unground Thrust Bearings Engineering Data Specials and Applications 4 5 6-7 8-9 0-2-3 4-5 6-7 8-9 20-2 22-23 24-27 28-3 3

PRODUCT Selection Guide NICE Ball Bearings, Inc. produces a full line of ground, semi-ground, and unground bearing assemblies. To choose the exact bearing you need, start with the Nice line of standard inch-dimension, radial, angular contact and thrust ball bearings. Standard series bearings can be customized to include many features that can satisfy the demands of many special applications. They are available with special bores, modified outer ring shapes, extended inner rings, locking devices, and flanged housings. Standards can be ordered sealed, shielded, or open, and are offered in ground and semi-ground grades to deliver the most cost effective solution for your application. If you are now designing with only ABEC- level or higher bearings, chances are there may be a more economical solution to your application. A Nice application engineer can help you determine the exact precision your design requires, and show you how to take advantage of the savings, selection and special features available in our standard series. Even when a standard isn't the answer, our engineers can deliver an economical, modified standard design that is "fit for purpose." DESIGN Nice Standard Product Line Class Ground Semi- Ground Unground Modified Standards and Specials Series 600 7500 7600 6900 400 500 Type (Retainer) Radial Radial Radial Extended Inner (Full Complement) Radial Radial/Thrust 600 Thrust All Radial Flanged Extended Inner Radial Retainer and Full Types Thrust Radial/Thrust Ground Surfaces Raceways Bore, O.D., Faces Raceways, O.D., Faces 3000 (Retainer) Outer Radial Raceways, O.D., Faces Any Combination Bore Range 3/6"- 5/6" /2"- /4" 3/8"-" 3/6"-" 3/6"-2" /4"-2 /4" /4"- /2" 3/6"-2" Three basic ball bearing types are illustrated to assist in proper design selection. 2. 3. Radial bearings are designed primarily to carry loads perpendicular to the axis of the bearing bore. They will also accommodate limited thrust loading or a combination radial and thrust load. Thrust bearings carry loads applied parallel to the axis of the bearing bore. They are not designed to accommodate radial loads. Many sizes and types of the three basic designs illustrated are available for selection from this catalog. However, if you have an unusual application problem, NICE field and factory engineers will be glad to give you the benefit of their specialized training and broad practical experience. Combination radial and thrust bearings are designed for simultaneously applied thrust and radial loads. Combination assemblies will also carry pure thrust loading; however, they are not recommended for straight radial loads unless provisions are made to keep the inner rings and outer rings in proper contact with the balls. 4

PRODUCT Features Modified Standards Modified standard bearings feature a standard cage and ball complement or a full ball complement, with custom engineered modifications to the other bearing components. The exact inner and outer ring dimensions and designs can be combined with a wide range of seals, shields, special greases, special materials and special finishes. Outer Rings Outer rings can be custom engineered to include milled slots, snap rings, track grooves, or even a variety of plastic tires. Add to this flanges or pulley units and a variety of custom solutions are readily available. Modification instead of full customizing gives the user the benefits of a fully custom bearing with lower costs and faster delivery times. Prototype lots are readily affordable and available for testing and evaluation. Modified standard bearings offer the greatest value for your bearing dollar by offering custom bearings at standard prices. Here are some of the many ways we can modify standard ball bearings to fit any application. Milled Slots Sphered Inner Rings A variety of bore shapes and sizes can be custom engineered to simplify mounting procedures, reduce assembly costs, and allow misalignment. Track Groove Polyurethane Tire Splined Bore Hex Bore D-Shaped Bore Solid Inner Ring Materials and Finishes Nice has extensive experience with a variety of special materials and finishes developed to stand up to various contaminants or to take unusually hard wear. Nice bearings are made from steels of various chemical compositions. Carburizing grades are case hardened to desired depths and hardness values for wear and breakdown resistance. High carbon chrome alloy steels are through hardened for high wear and fatigue resistance. Stainless steels are available for corrosion resistance and food service applications. Special platings and finishes such as zinc, black oxide, and thin dense chrome are available for special applications. Nice application engineers can assist in bearing selection for special material applications. 5

600 Series Precision Ground Radial Bearings PRECISION GROUND ON ALL CONTACT SURFACES EASY TO USE INCH DIMENSIONS MEDIUM LOADS MAX SPEED RANGE - 5000-6000 RPM THROUGH HARDENED BEARING STEEL NYLON RETAINER STANDARD GREASED, DOUBLE SEALED OR DOUBLE SHIELDED STANDARD AVAILABLE SINGLE SEALED OR SINGLE SHIELDED, OPEN, AND WITH OR WITHOUT GREASE BEARING NUMBER PRINCIPAL DIMENSIONS DOUBLE SEAL SINGLE SEAL DOUBLE SHIELD SINGLE SHIELD OPEN 4 4 4 4 5 5 5 5 5 5 602DC 603DC 604DC 605DC 606DC 607DC 64DC 65DC 66DC 620DC 62DC 623DC 628DC 630DC 633DC 635DC 638DC 640DC 64DC 652DC 654DC 657DC 602SC 603SC 604SC 605SC 606SC 607SC 64SC 65SC 66SC 620SC 62SC 623SC 628SC 630SC 633SC 635SC 638SC 640SC 64SC 652SC 654SC 657SC 602DS 603DS 604DS 605DS 606DS 607DS 64DS 65DS 66DS 620DS 62DS 623DS 628DS 630DS 633DS 635DS 638DS 640DS 64DS 652DS 654DS 657DS 602SS 603SS 604SS 605SS 606SS 607SS 64SS 65SS 66SS 620SS 62SS 623SS 628SS 630SS 633SS 635SS 638SS 640SS 64SS 652SS 654SS 657SS 602NS 603NS 604NS 605NS 606NS 607NS 64NS 65NS 66NS 620NS 62NS 623NS 628NS 630NS 633NS 635NS 638NS 640NS 64NS 652NS 654NS 657NS BORE d +.0000/-.0005 0 0.325 0 0.325 0 0 0 0 0 0 0 0 0 0 0.8750.0000.250.2500.2500 O.D. D +.0000/-.0005 0.6875 0.8750 0.8750 0.9063 0.9063 0.9063.250.250.250.3750.3750.3750.6250.6250.7500.7500 2.5000 2.5000 2.5625 6 2 3 4 54 Width for sealed versions = 0.325 Width for sealed versions = 0.3438 Weights given are for greased and sealed versions Multi-part seals O.D. Tolerance +.0000/-.0006

600 Series Precision Ground Radial Bearings Precision ground 600 series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 600 series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction. The 600 series radial bearings are available open, single or doubled shielded, or single or double sealed. Double sealed and double shielded bearings are supplied grease packed as standard. Open and single closure bearings can be supplied greased on request. TO CLEAR r d B D BASIC LOAD RATINGS WEIGHT ABUTMENT AND FILLET DIMENSIONS WIDTH B +.0000/-.005 DYNAMIC C STATIC CO 3 W d a min D a max r max 0 0.283 0.283 0.325 0.325 0.325 0 0 0 0 0 0 0 0.5625 0.5625 0.5625 0 0 0.6875 2 2 5 644 644 698 698 698 200 200 200 878 878 878 2600 2600 2600 2600 2967 2967 2967 3864 3864 5360 70 255 255 300 300 300 475 475 475 850 850 850 00 00 025 025 350 350 350 220 220 2620 0.02 0.03 0.03 0.04 0.04 0.03 0.06 0.06 0.06 0.2 0. 0.0 0.8 0.6 0.22 0.20 0.32 0.26 0.38 0.46 0.5 0.57 0.330 0.474 0.474 0.503 0.57 0.57 0.595 0.622 0.622 0.658 0.720 0.753 0.845 0.965 0.845 0.965 0.988.3.97.375.500.500 0.64 0.778 0.778 0.778 0.778 0.778.04.04.04.203.203.203.446.446.530.530.760.760.760 2.244 2.244 2.34 0.02 0.02 0.05 0.02 0.05 0.05 7

3000 Series Semi-Ground Radial Bearings PRECISION GROUND ON ALL CONTACT SURFACES EXCEPT BORE EASY TO USE INCH DIMENSIONS ECONOMICAL BEARING FOR LIGHTER LOADS THAN THE 600 SERIES MAX SPEED RANGE - 2500-3000 RPM HARDENED BEARING STEEL NYLON RETAINER STANDARD GREASED, DOUBLE SEALED OR DOUBLE SHIELDED STANDARD AVAILABLE SINGLE SEALED OR SINGLE SHIELDED, OPEN, AND WITH OR WITHOUT GREASE BEARING NUMBER PRINCIPAL DIMENSIONS DOUBLE SEAL SINGLE SEAL DOUBLE SHIELD SINGLE SHIELD OPEN 4 3002DC 3002SC 3002DS 3002SS 3002NS 3003DC 3003SC 3003DS 3003SS 3003NS 3004DC 3004SC 3004DS 3004SS 3004NS 3005DC 3005SC 3005DS 3005SS 3005NS 3006DC 3006SC 3006DS 3006SS 3006NS 3007DC 3007SC 3007DS 3007SS 3007NS 304DC 304SC 304DS 304SS 304NS 305DC 305SC 305DS 305SS 305NS 306DC 306SC 306DS 306SS 306NS 3020DC 3020SC 3020DS 3020SS 3020NS 302DC 302SC 302DS 302SS 302NS 3023DC 3023SC 3023DS 3023SS 3023NS 3028DC 3028SC 3028DS 3028SS 3028NS 3030DC 3030SC 3030DS 3030SS 3030NS 5 3033DC 3033SC 3033DS 3033SS 3033NS 5 3035DC 3035SC 3035DS 3035SS 3035NS 5 3038DC 3038SC 3038DS 3038SS 3038NS 5 3040DC 3040SC 3040DS 3040SS 3040NS 5 304DC 304SC 304DS 304SS 304NS Width for sealed versions = 0.325 2 Width for sealed versions = 0.3438 3 Weights given are for greased and sealed versions 4 Multi-part seal 45 O.D. Tolerance +.0000/-.0006 BORE d +.005/-.000 0 0.325 0 0.325 0 0 0 0 0 0 0 0 0 0 0.8750.0000 O.D. D +.0000/-.0005 0.6875 0.8750 0.8750 0.9063 0.9063 0.9063.250.250.250.3750.3750.3750.6250.6250.7500.7500 8

3000 Series Semi-Ground Radial Bearings Semi-ground 3000 series bearings are specially designed to provide a line of economical bearings for lighter loads than the 600 series and speeds to approximately 2500 rpm. The 3000 series bearings are dimensionally the same as the 600 series bearings, except for the precision of the inner ring (as machined tolerances). Careful heat treatment provides a uniform and exact degree of hardness for maximum life. The 3000 series bearings are precision ground to the same close tolerances on the O.D. as the 600 series with exceptional care given to the ball grooves. A ball retainer, or separator, is employed to increase the range of allowable speeds by reducing ball contact friction. The 3000 series radial bearing is available open, single or doubled shielded, or single or double sealed. The double shielded and double sealed versions are grease packed as standard. Open and single closure bearings can be furnished with or without grease as desired. TO CLEAR r d B D BASIC LOAD RATINGS WEIGHT ABUTMENT AND FILLET DIMENSIONS WIDTH B +.0000/-.005 DYNAMIC C STATIC CO 3 W d a min D a max r max 0 0.283 0.283 0.325 0.325 0.325 0 0 0 0 0 0 0 0.5625 0.5625 0.5625 2 2 255 325 325 350 350 350 600 600 600 940 940 940 300 300 300 300 480 480 480 70 255 255 300 300 300 475 475 475 850 850 850 00 00 025 025 350 350 350 0.02 0.03 0.03 0.04 0.04 0.03 0.06 0.06 0.06 0.2 0. 0.0 0.8 0.6 0.22 0.22 0.32 0.29 0.26 0.64 0.778 0.778 0.778 0.778 0.778.04.04.04.203.203.203.446.446.530.530.760.760.760 0.330 0.474 0.474 0.503 0.57 0.57 0.595 0.622 0.622 0.658 0.720 0.753 0.845 0.965 0.845 0.965 0.988.3.97 0.02 0.02 0.05 0.02 0.05 0.05 9

6900 Series Semi-Ground Radial Bearings, Extended Inner with Flanged Housing EASY TO USE INCH DIMENSIONS MEDIUM LOADS MAX SPEED RANGE - 5000-6000 RPM THROUGH HARDENED RETAINER DESIGN NYLON RETAINER STANDARD DOUBLE SEALED STANDARD EXTENDED INNER RING WITH TWO SET SCREWS BEARINGS ARE AVAILABLE WITH OR WITHOUT FLANGE 6906 6908 690 692 696 ASSEMBLY NUMBER FLANGED UNIT 2 BEARING ONLY 6906 - B 6908 - B 690 - B 692 - B 696 - B d D Bore O.D. +.005/-.000 +.0000/-.0005.000 0.9063.6250.6250 O.D.Tolerance for 692 and larger is +.0000/-.0006 Weights given are for flanged versions. B +.000/-.005 0.325 0 0 0.5625 0.5625 PRINCIPAL DIMENSIONS C 0.6875.0000.0000.0625.0625 E 0.555 0.995 0.995.293.293 F G Bolt Centers.875 2.875 2.875 3.250 3.250 H 2.500 3.750 3.750 4.25 4.25 0

6900 Series Semi-Ground Radial Bearings, Extended Inner with Flanged Housing The 6900 series consists of a double sealed, ground bearing with an extended inner ring. It is provided with two set screws and a flanged housing designed for flush mounting. Bearings are supplied assembled in the housing. Flanged and non-flanged units are available from stock. The pressed steel flanged housing provides a secure yet inexpensive means for holding the bearing in place. Although these units are not of the selfaligning type, they will accommodate a limited amount of angular misalignment. For less exacting applications involving light loads and speeds up to 2500 rpm, semi-ground type bearings may be specified in lieu of a precision ground bearing at a cost savings. These assemblies are generally produced to order and may or may not be in stock. Contact your Nice sales representative or customer service for more information. FLANGED UNIT N S M O K L J BEARING ONLY D C G B H d F E P PRINCIPAL DIMENSIONS BASIC LOAD RATINGS WEIGHT J Overall Width K L M N O 2-Set Screws P Hole Dia. S DYNAMIC C STATIC C O W 2.25.875.875 2.250 2.250 0.3438 0.6875 0.6875 0.6875 0.6875 0.3438 0.6875.0000.0000.250.250 0.062 0.062 0.062 0.062 8-32 /4-28 /4-28 /4-28 0-32 0.325 0 0.0 0.0 0.062 0.062 580 60 60 870 870 300 000 000 350 350 0.07 0.35 0.32 0.55 0.33

7500 Series Heavy Duty Precision Ground Radial Bearings PRECISION GROUND ON ALL CONTACT SURFACES, SIMILAR TO THE 600 SERIES EASY TO USE INCH DIMENSIONS MEDIUM LOADS MAX SPEED RANGE - 5000-6000 RPM THROUGH HARDENED BEARING STEEL RETAINER DESIGN NYLON RETAINER STANDARD DOUBLE SEALED STANDARD HIGHLY EFFECTIVE SINGLE LIP CONTACT SEAL WITH TRASH GUARD AVAILABLE SINGLE SEALED OR OPEN ALL BEARINGS HAVE A SNAP RING GROOVE (SNAP RING ASSEMBLED AS AN OPTION) RECOMMENDED FOR APPLICATIONS WHERE ACCURATE, QUIET PERFORMANCE AND SUPERIOR SEALING ARE REQUIRED PRINCIPAL DIMENSIONS BASIC BEARING NUMBER BORE d +.0000/-.0005 O.D. D +.0000/-.0005 OUTER WIDTH B +.000/-.005 A INNER WIDTH C +.000/-.005 F 7508 750 752 754 756 758 7520 0.875.000.25.250.7500.7500.7500 2.5625 2.5625 0.875 0.875.009.009.009.306.306.672.672 2 3 O.D.Tolerance for 754 and larger is +.0000/-.0006 Radius R indicates the maximum fillet radius in housing or shaft which bearing will clear Weights given are for greased and sealed versions 2

7500 Series Heavy Duty Precision Ground Radial Bearings The Nice 7500 series bearings are single row retainer type radial bearings, similar in construction to the 600 series. They incorporate a highly effective single lip contact seal, with metal guard. The inner and outer rings are turned from chrome steel and after careful heat treatment the through hardened rings are accurately ground to close tolerances. The 7500 series bearings are recommended for applications requiring the accuracy of rotation and quiet performance of close tolerance precision grade bearings, and where a superior seal is required to retain lubricant and keep the bearing free from dust and dirt. Normally double sealed (type DL), the 7500 series bearings can be produced to order with seals on one side only (type SL) or without seals (type NL). Double sealed bearings are grease packed as standard; however, all types can be furnished with or without grease packing as desired. All types are provided with a snap ring groove, with the snap ring assembled on the bearing as an option. A C B d A F D H G J G +.000 -.005 0.36 0.36 0.36 0.36 0.36 0.90 0.90 PRINCIPAL DIMENSIONS H 0.042 0.042 0.042 0.042 0.042 0.065 0.065 J.929.929.929 2.563 2.563 2.7656 2.7656 R Radius WEIGHT W 2 3 0.330 0.290 0.30 0.360 0.330 0.795 0.565 BASIC LOAD RATINGS DYNAMIC C 2595 2595 2595 2970 2970 5360 5360 STATIC C O 00 00 00 350 350 2620 2620 ABUTMENT AND FILLET DIMENSIONS da min 0.875.000.25.250.375.500 Da max.500.500.500.750.750 2.32 2.32 r max 3

7600 Series Heavy Duty Precision Ground Radial Bearings with Extended Inner Ring PRECISION GROUND ON ALL CONTACT SURFACES, SIMILAR TO THE 600 SERIES EASY TO USE INCH DIMENSIONS MEDIUM LOADS MAX SPEED RANGE - 5000-6000 RPM THROUGH HARDENED CAGED DESIGN NYLON CAGE STANDARD DOUBLE SEALED STANDARD HIGHLY EFFICIENT SINGLE LIP CONTACT SEAL AVAILABLE SINGLE SEALED OR OPEN EXTENDED INNER RING WITH SET SCREWS ALL BEARINGS HAVE A SNAP RING GROOVE, SNAP RING ASSEMBLED AS AN OPTION RECOMMENDED FOR APPLICATIONS WHERE ACCURATE, QUIET PERFORMANCE AND SUPERIOR SEALING ARE REQUIRED 2 3 BASIC BEARING NUMBER 7608 7609 760 76 762 763 764 765 766 767 768 7620 BORE d +.0008/-.0000.5000.5625.6250.6875.7500.825.8750.9375.0000.0625.250.2500 O.D. D +.0000/-.0005.7500.7500.7500.7500.7500 2.5625 2.5625 2.5625 PRINCIPAL DIMENSIONS OUTER WIDTH B +.000/-.005 A O.D. Tolerance for 763 and larger is +.0000/-.0006 Radius R indicates the maximum fillet radius in housing or shaft which bearing will clear Weights given are for greased and sealed versions F.009.009.009.009.009.306.306.306.306.672.672.672 G +.005/-.005 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.90 0.90 0.90 4

7600 Series Heavy Duty Precision Ground Radial Bearings with Extended Inner Ring The Nice 7600 series bearings are single row retainer type radial bearings similar in construction to the 600 series. They incorporate a highly efficient single lip contact seal with metal guard. The inner and outer rings are turned from chrome steel and after careful heat treatment the through hardened rings are accurately ground to close tolerances. The inner ring is extended and contains set screws whereas the 7500 series bearing does not. The 7600 series bearings are recommended for applications requiring the accuracy of rotation and quiet performance of close limit precision grade bearings, and where a superior seal is required to retain lubricant and keep the bearing free from dust and dirt. Normally double sealed (type DL), the 7600 series bearings can be produced to order with seals on one side only (type SL) or without seals (type NL). Double sealed bearings are grease packed as standard; however, all types can be furnished with or without grease packing as desired. All types are provided with a snap ring groove, with the snap ring assembled on the bearing as an option. D A B K L M N d F J H G PRINCIPAL DIMENSIONS BASIC LOAD RATINGS WEIGHT H J INNER WIDTH K +.000/-.005 L M N 2 set screws R Radius DYNAMIC C STATIC C O W 2 3 0.042 0.042 0.042 0.042 0.042 0.042 0.042 0.042 0.042 0.065 0.065 0.065.929.929.929.929.929 2.563 2.563 2.563 2.563 2.7656 2.7656 2.7656.092.092.092.092.092.79.79.79.79.47.47.47 0.405 0.405 0.405 0.405 0.405 0.492 0.492 0.492 0.492 0.605 0.605 0.605 0.233 0.233 0.233 0.233 0.233 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0-32 0-32 0-32 0-32 0-32 /4-28 /4-28 /4-28 0-32 /4-28 /4-28 /4-28 2595 2595 2595 2595 2595 2970 2970 2970 2970 5360 5360 5360 00 00 00 00 00 350 350 350 350 2620 2620 2620 0.36 0.34 0.32 0.30 0.28 0.45 0.43 0.40 0.36 0.84 0.80 0.7 5

400 Series Single Row Unground Radial Bearings RADIAL UNGROUND BEARING EASY TO USE INCH DIMENSIONS MODERATE LOADS MAX SPEED RANGE - 000-200 RPM HARDENED RINGS FULL COMPLEMENT OF BALLS FULLY UNITIZED ASSEMBLY BEARING SUPPLIED PRE-GREASED STANDARD BEARING DIMENSIONAL DATA BASIC BEARING NUMBER BORE d +0.005/-0.000 O.D. D +0.005/-0.000 WIDTH A +0.00/-0.00 WIDTH B Reference No. BALLS Size 402-2V 400-4V 400-5V 400-6V 400-2V 400-4V 404-6V 400-8V 400-20V 400-2V 407-22V 400-23V 400-24V 400-26V 408-28V 40-30V 400-3V 400-33V 42-35V 400-36V 46-4V 400-47V 424-5V 400-55V 400-59V 0.32 0.437 0.32.000.250.500.750 2.000 0.687 0.875 0.875 0.875 0.937.062.062.062.25.25.25.28.28.28.375.375.500.500.625.750 2.000 2.625 2.750 3.093 3.375 0.32 0.370 0.32 0.32 0.32 0.470 0.470 0.437 0.437 0.562 0.572 0.687 0.875 0.937 0.32 0.406 0.32 0.32 0.32 0.687 0.875 0.937 0 4 4 4 5 6 6 6 8 8 5 6 6 6 6 6 7 7 8 4 7 23 20 2 2 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 5/32 5/32 5/32 5/32 3/6 3/6 3/6 3/6 3/6 /4 /4 /4 5/6 /32 NOTES BALLS - Carbon Steel Grade 200 RINGS - Carbon Steel, Case Hardened BANDS - 00 Carbon Steel, Soft Bearings supplied prelubricated with grease 6

400 Series Single Row Unground Radial Bearings The Nice 400 series of unground radial ball bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer and a soft steel band on the outer ring. This permits the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are designed for use in applications with speeds not exceeding 200 rpm. D d B A WEIGHT W RADIAL CAPACITY (LBS) REVOLUTIONS PER MINUTE 50 00 200 300 600 200 0.02 0.03 0.03 0.03 0.04 0.05 0.04 0.07 0.08 0.07 0.65 0.09 0.09 0.09 0.2 0.0 0.6 0.4 0.4 0.22 0.30 0.75 0.80.0.35 0 56 56 56 67 78 78 78 200 200 200 275 275 275 375 375 400 400 450 625 757 020 390 770 200 77 08 08 08 6 24 24 24 39 39 39 93 93 93 26 26 279 279 33 430 525 70 967 225 458 53 75 75 75 80 85 85 85 96 96 96 33 33 33 80 80 92 92 26 300 362 490 670 847 00 43 60 60 60 65 69 69 69 78 78 78 07 07 07 45 45 55 55 74 240 293 395 540 683 87 30 42 42 42 45 48 48 48 54 54 54 75 75 75 0 0 08 08 2 68 204 275 376 477 567 2 30 30 30 32 34 34 34 38 38 38 52 52 52 7 7 76 76 85 7 42 93 264 332 396 7

5000 Series Single Row Unground Flanged Radial Bearings RADIAL UNGROUND BEARING EASY TO USE INCH DIMENSIONS MODERATE LOADS MAX SPEED RANGE - 000-200 RPM HARDENED RINGS FULL COMPLEMENT OF BALLS FULLY UNITIZED ASSEMBLY FLANGE ON O.D. LOCATES BEARING IN TUBE OR HOUSING BEARING SUPPLIED PRE-GREASED STANDARD BASIC BEARING NUMBER 556-V 5543-V 5507-V 5368-V 549-V 588-V 5273-V 5327-V 528-V 589-V 5875-V 548-V BORE A +0.005/-0.000 0.32.000 O.D. B +0.005/-0.000 0.687 0.906.25.25.25.375.375.500.578.750 2.000 2.000 NOTES BALLS - Carbon Steel Grade 200 RINGS - Carbon Steel, Case Hardened BANDS - 00 Carbon Steel, Soft Bearings supplied prelubricated with grease BEARING DIMENSIONAL DATA OUTER WIDTH C +0.00/-0.00 0.305 0.385 0.385 0.385 0.463 0.463 0.447 0.55 0.595 0.572 0.572 D 0.047 0.040 0.062 0.062 0.062 0.062 0.062 0.062 0.40 0.093 0.093 0.093 E.000.250.250.250.500.500.656.687.875 2.25 2.25 F 0.050 0.088 0.25 0.25 0.25 0.25 0.25 0.25 0.234 0.56 0.28 0.28 INNER WIDTH G ±.00 0.350 0.437 0.437 0.437 0.546 0.546 0.53 0.609 0.687 0.78 0.78 8

5000 Series Single Row Unground Flanged Radial Bearings G The 5000 series of bearings is similar in construction to the 400 series except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pre-greased as a standard. The bearings are designed for use in applications with speeds not exceeding 200 rpm. B A E F D C WEIGHT RADIAL CAPACITY (LBS) BALLS W REVOLUTIONS PER MINUTE NO. SIZE 50 00 200 300 600 200 0 5 5 5 5 6 6 7 2 5 7 7 /8 /8 5/32 5/32 5/32 3/6 3/6 3/6 /4 /4 /4 /4 0.02 0.04 0.08 0.07 0.07 0.2 0.0 0.6 0.23 0.28 0.32 0.30 0 67 200 200 200 375 375 492 535 625 757 757 77 6 39 39 39 26 26 342 367 430 525 525 53 80 96 96 96 80 80 236 258 300 362 362 43 65 78 78 78 45 45 90 206 240 293 293 30 45 54 54 54 0 0 32 44 68 204 204 2 32 38 38 38 7 7 92 00 7 42 42 9

500 Series Single Row Unground Combination Radial and Thrust Bearings ANGULAR CONTACT UNGROUND BEARING EASY TO USE INCH DIMENSIONS MODERATE LOADS MAX SPEED RANGE - 000-200 RPM HARDENED RINGS FULL COMPLEMENT OF BALLS FULLY UNITIZED ASSEMBLY BEARING DIMENSIONAL DATA COMBINED RADIAL BASIC BEARING NUMBER BORE A +0.005 /-0.000 O.D. B +0.005 /-0.000 WIDTH C +0.00 /-0.00 D +0.05 /-0.05 E RADIUS R No. BALLS Size WEIGHT W REVOLUTIONS PER MINUTE 0 50 R T R T 50 503 504 505 507 508 5 52 53 55 56 57 58 2 2 2 2 0.437 0.437 0.437 0.875.000 T8.25 T0.250 T0.32 T0 0.688.062 0.82 0.906.047.25.359.594.687 2.047.82 2.3075 T0 2.3075 T0 0.406 0.29 0.28 0.359 0.344 0.422 0.469 0.609 0.422 0.594 0.609 0.29 0.344 0.87 0.32 0.32 0.422 0.422 0.547 0.344 0.547 0.53 0.79 0.688 0.875.047.250.28.625.438.844.844 0.094 0.72 0.078 0.094 0.72 0.4 0.72 0.203 0.88 0.29 0.4 0.234 20 6 3 6 4 5 4 24 7 9 /8 3/6 3/32 /8 3/6 3/6 3/6 /4 /4 5/6 3/6 5/6 9/32 0.0 0.06 0.0 0.04 0.04 0.06 0.08 0.4 0.08 0.25 0.0 0.28 0.30 72 62 73 05 77 90 235 366 393 573 354 696 630 48 08 49 70 8 27 57 244 262 382 236 464 420 50 5 52 73 25 36 67 260 273 400 250 490 442 33 77 35 49 83 9 73 82 267 67 327 295 2 Maximum fillet radius on shaft which the bearing will clear T8 = +.008/-.000 T0 = +.00/-.000 20 NOTES BALLS - Carbon Steel Grade 200 RINGS - Carbon Steel, Case Hardened BANDS - 00 Carbon Steel, Soft Bearings supplied prelubricated with grease

500 Series Single Row Unground Combination Radial and Thrust Bearings The Nice 500 series of unground combination radial and thrust bearings are designed for applications where a pure radial bearing or a pure thrust bearing would be unsuitable. The Nice 500 Series is an angular contact bearing designed for applications where thrust and/or radial load carrying capability is required. C B A E R D AND THRUST CAPACITY IN POUNDS THRUST CAPACITY IN POUNDS 00 REVOLUTIONS PER MINUTE 250 500 000 REVOLUTIONS PER MINUTE R T R T R T R T 0 50 00 250 500 000 35 80 25 52 88 98 7 82 96 284 77 345 32 23 53 7 35 59 65 78 2 3 89 8 230 208 23 5 23 33 56 6 74 6 24 8 2 220 99 5 34 5 22 37 40 50 77 83 2 74 47 33 6 35 6 22 40 42 52 82 85 27 79 56 39 23 5 27 28 35 55 57 85 53 04 93 0 25 0 6 27 3 37 58 60 90 57 09 99 7 7 7 8 2 25 39 40 60 38 73 66 7 6 73 04 76 90 234 364 390 569 35 69 625 58 30 59 84 42 54 89 294 35 459 284 558 505 43 96 44 62 05 3 40 27 233 339 209 42 373 25 56 25 36 6 66 8 26 35 97 22 239 27 8 40 8 26 44 48 59 9 98 42 88 73 56 5 34 5 22 37 40 49 76 8 8 73 44 30 2

600 Series Unground Thrust Bearings UNGROUND THRUST BEARING EASY TO USE INCH DIMENSIONS MODERATE LOADS MAX SPEED RANGE - 000-200 RPM HARDENED RINGS FULL COMPLEMENT OF BALLS SOFT STEEL BAND OFFERS EASE OF INSTAL- LATION UPPER RING IS FREE TO ROTATE AND HAS CLOSE FIT FOR SHAFTS LOWER RING IS FIXED AND HAS SHAFT CLEAR- ANCE IN THE BORE BASIC BEARING NUMBER 60-V 602-V 602 3/4-V 603-V 603 /4-V 605-V 606-V 607-V 608-V 609-V 60-V 60-/4V 6-V 63-V 66-V 69-V 62-V BORE A +.000/-.00.250.375.453.500.500.625.625.750.875.000.000.06.063.25.250.437.500 BORE A +/-.00.275.400.478.525.525.656.656.775.900.075.03.03.094.50.275.462.525 BEARING DIMENSIONAL DATA O.D. B Max. ±.00 27/32 3/64 55/64 7/64 /8 27/64 2/32 57/64 2 3/32 3/4 3/32 2 3/32 2 /32 2 5/32 2 9/32 HEIGHT BALLS C +/-.00 Size.333.359.28.437.344.344.453.545.594.630.625.625.625.625.625.625.625 No. 0 4 5 0 2 6 2 5 7 2 8 6 8 9 23 23 25 5/32 5/32 /8 /4 3/6 5/32 /4 /4 /4 3/8 /4 /4 /4 /4 /4 /4 /4 WEIGHT W (lbs) 0.03 0.06 0.03 0.09 0.04 0.04 0.2 0.9 0.28 0.30 0.29 0.2 0.26 0.3 0.40 0.43 0.45 NOTES BALLS - Carbon Steel Grade 200 RINGS - Carbon Steel, Case Hardened BANDS - 00 Carbon Steel, Soft Bearings supplied prelubricated with grease 22

600 Series Unground Thrust Bearings The Nice 600 series is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore. RADIAL CAPACITY (LBS) REVOLUTIONS PER MINUTE 0 50 00 250 500 000 5 304 246 82 98 7 5 426 344 254 38 00 7 292 236 74 94 68 48 780 630 465 252 82 29 526 425 34 70 23 87 858 693 5 277 200 43 936 750 558 302 28 55 70 945 698 378 273 94 326 07 79 428 309 220 706 378 07 55 398 284 404 34 837 454 328 233 248 008 744 403 29 207 404 34 837 454 328 233 482 97 883 479 346 246 794 449 069 579 49 298 794 449 069 579 49 298 950 575 62 630 455 324 23

BEARING Engineering Data The methods, equations, and technical data presented in this section allow the user to select the correct bearings and estimate their performance for a wide range of applications. These calculations apply to Nice's selection of ground and semi-ground product lines, namely the 600, 3000, 6900, 7500, and 7600 series. For applications with unusual operating conditions, Nice can provide engineering assistance and recommend the most suitable bearing design. Where standard bearings cannot be used, Nice can meet the application requirements with a special bearing design specifically tailored for optimum performance. Contact your RBC Sales Engineer for special sizes, materials, application requirements, dimensions, and tolerances. Capacity and Fatigue Life of Ball Bearings The BASIC DYNAMIC LOAD RATING, C, or "dynamic capacity," for a ball bearing is that calculated, constant radial load at which a group of apparently identical bearings with a stationary outer ring can statistically endure one million revolutions of the inner ring. The BASIC STATIC LOAD RATING, Co, or "static capacity," is that uniformly distributed load, which produces a maximum theoretical contact stress on the most heavily loaded ball of 609,000 psi. At this contact stress, a permanent deformation of ball and raceway occurs. This deformation is approximately 0.0% of the ball diameter in inches. The RATING LIFE L 0, is a statistical measure of the life which 90% of a group of apparently identical ball bearings will achieve or exceed. For a single bearing L 0 also refers to the life associated with 90% reliability. Median Life, L 50, is the life which 50% of the group of ball bearings will achieve or exceed. Median life is usually not greater than five times the rating life. The relationship between rating life, load rating and load is: L 0 = (C/P) 3 with L 0 = rating life (0 3 rev) C = basic load rating P = equivalent radial load To obtain the rating life in hours, use: L 0 hrs = 6667/N * (C/P) 3 with N= speed (rpm) The Equivalent Radial Load is defined as: P = XF r + YF a with F r = radial load F a = axial load X = see table below Y= see table below For radial contact ball bearings calculate P with X =.0 and Y=.0. Then recalculate P with X = 0.56 and Y from the chart below. Use the larger value of P to determine L 0 life. F a nd 2 25 50 00 50 200 300 500 750 000 Y 2.30.99.7.55.45.3.5.04.00 with n = number of balls d = diameter of balls 24

BEARING Engineering Data Operating Temperature Maximum recommended operating temperatures for Nice ball bearings is a function of the bearing cage, seal, and grease materials used in the final assembly. For Nice's standard precision product series (600, 3000, 7500, 7600, and 6900) the maximum recommended operating temperature is 250 F. Operation at temperatures as high as 300 F can be tolerated intermittently. When oper-ating at the extremes of allowable temperatures, grease may purge out between the seal lip and the bearing inner ring. If this is unacceptable for a particular application, other design arrangements might be necessary. Nice's full complement unground series (400, 5000, 500, and 600) can operate at higher temperatures than above, and will be limited only by choice of lubricant. However, Nice Engineering should be consulted for application verification. Limiting Speeds Limiting operating speed is dependent upon the materials used in construction and the internal design and finishing of the bearing. For Nice's standard selection of ball bearings the recommended speed limits are as follows: Lubrication Bearing Series 600 3000 7500 7600 6900 400 5000 500 600 Limiting Speed (rpm) 5000 2500 5000 5000 5000 200 200 000 000 All Nice double sealed and double shielded precision ground bearings (600, 3000, 7500, 7600, and 6900 series) are supplied pre-greased 33% full with Shell Alvania #2 grease. Shell Alvania #2 is a general purpose lithium soap grease with a useful temperature range of -40 F to +280 F. Single closure and open bearings are supplied slushed with a rust preservative. Nice can supply bearings with a wide variety of greases by special order, some of which are listed below. Contact Nice Engineering for details. GREASES Manufacturer Product Trade Name Temperature Range ( F) Amoco Amolith#2-40 to +250 Chevron Ultra Duty# -20 to +350 Chevron SRI-2-22 to +347 Dupont Krytox 240 AC -30 to +550 Exxon Unirex #2-40 to +400 Exxon Andok C +4 to +250 Mobil Mobilgrease 28-65 to +250 Shell Alvania #2-40 to +284 Shell Alvania #3-40 to +284 Shell Dolium R -40 to +320 Shell Darina AX -40 to +320 Retainers/Cages Nice precision ground ball bearings of standard production are fitted with snap-in ball riding retaining cages made from heat stabilized polyamide 6/6. For special applications or design requirements cages made of special materials can be supplied. These include pressed steel or stainless steel, glass reinforced polyamide 6/6, and brass. Availability of bearings fitted with non-standard cages should be checked before ordering. Axial Load Capacity Deep groove ball bearings by nature of their design can carry axial loads either alone or in combination with radial loads. Axial load capacity of standard bearings is 0.5 times the Basic Static Load Rating, C O of that bearing. Smaller bearings should not be subject to a load greater than 0.25 times C O. Excessive axial loads can lead to serious reduction of bearing service life. 25

BEARING Engineering Data Misalignment Radial deep groove ball bearings do have the ability to accomodate a limited amount of angular misalignment. The amount of angular misalignment that can be tolerated before adversely effecting bearing performance is a function of a variety of parameters. Internal radial clearance, internal design, applied loads, and the size of the bearing all play a role in determining the bearing's misalignment capability. Because of this, exact values for allowable misalignment are not provided. Under normal operating conditions, a safe estimate of permissable angular misalignment is usually between.0005 in/in and.003 in/in. Noise levels may increase when the bearing is operating misaligned. Finish and Accuracy Nice ball bearings are available in several different finish and accuracy grades that may be selected to suit the functionality of a particular application. Nice fully ground precision bearings are available in single row radial configurations. Boundary dimensions and internal fit-up are held to exacting tolerances by precision grinding of all external surfaces and both ball grooves. These bearings are recommended for applications requiring quiet running, higher speeds, and applied loads. Normal tolerances for series 600, 7500, and 7600 bearings range from " to 0.00". See product tables for exact tolerances. Nice functional precision and unground bearings are designed for those applications where speeds and loads are moderate, and running accuracy and noise requirements do not warrant a fully ground precision bearing. Single row radial, single row angular contact, and thrust ball bearings can be supplied in semi-ground or unground accuracy. Series 3000, 6900, 400, 5000, 500, and 600 bearings are available with functional tolerances that range from 0.005" to 0.00". See product tables for exact tolerances. Seals and Shields Contact seals are used on bearings to prevent solid contaminants and moisture from entering the bearing while retaining the lubricant in the bearing. Nice design and field experience has resulted in a variety of heavy duty and effective sealing designs. The Nice RSP seal, which is standard on the 600, 3000, and 6900 series bearings, is made of oil and wear resistant synthetic rubber with a steel reinforcement. The sealing action is accomplished via interference (deflection) of the seal lip against a recess in the inner ring shoulder. The outside diameter of the seal is retained in a recess groove cut into the outer ring. The DC seal is an old style multi-part assembly consisting of a nylon seal insert held in place with a metal shield. It is a cost effective seal used only on a few sizes and specials. The Nice DL and Super Ag seals are special high efficiency contact seals for heavy duty applications. They are constructed of synthetic rubber molded to the back of a metal shroud or guard. The seal lip rides in a labyrinth groove for reduced seal drag and lower torque against the inner ring land surface. Bearings fitted with non-contacting metal shields are primarily intended for applications where the inner ring rotates and low drag torque is a requirement. They retain the grease at normal operating speeds and temperatures while protecting the bearing from contamination. Metal shields are also utilized in applications where contaminants may DC Seal RSP Seal DS Shield pose a threat to the seal materials. DL Seal Super-Ag Seal Old Shields 26

BEARING Engineering Data Radial Internal Clearance All Nice single row deep groove ball bearings are designed and produced with radial internal clearance to provide for optimum performance. Nice ball bearings are supplied with "normal" radial clearance as standard, but can be ordered with radial clearance tighter than normal or looser than normal as a special item. The values listed in the table below apply to bearings before mounting and under no load and are supplied as a design guide. Consult Nice engineering when ordering other than normal radial clearance. RADIAL INTERNAL CLEARANCE (.000) INCH PRECISION LEVEL SERIES / TYPE 600/GROUND 3000/SEMI-GROUND 7500/GROUND 7600/GROUND 6900/SEMI-GROUND 400/UNGROUND 500/UNGROUND NORMAL MIN.-MAX. 2-2 0-50 2-2 2-2 0-30 0-70 0-70 TIGHT MIN.-MAX. 2-6 0-40 2-6 2-6 0-20 --- --- LOOSE MIN.-MAX. 7-22 0-60 7-22 7-22 0-40 --- --- EXTRA LOOSE MIN.-MAX. 0-25 0-70 0-25 0-25 0-25 --- --- Recommended Shaft and Housing Fits Proper mounting fits of ball bearings to shafts and in housings are critical to their performance. Excessively tight or excessively loose fits can result in premature bearing failures. Recommended fit values have been established which will facilitate optimum bearing performance. The shaft and housing fits listed below apply to the Nice 600 and 7500 series bearings. They may also be used for the housing fits only on the 3000, 7600, and 6900 series bearings. BEARING OUTSIDE DIAMETER MAX 0 0.6875 0 0.8750 0.9063.250.3750.6250.7500.8750 2.250 2.2500 2.5000 2.5625 MIN 0.6245 0.6870 0.7495 0.8745 0.9058.245.3745.6245.7495.8745.9994 2.244 2.2494 2.4994 2.569 0.8752 0.9065.252.3752.6252.7502.8752 2.0002 2.252 2.2502 2.5002 2.5627 HOUSING FITS HOUSING ROTATING HOUSING STATIONARY Housing Inside Theoretical Housing Inside Theoretical Dia Fit Dia Fit MAX MIN TIGHT LOOSE MAX MIN TIGHT LOOSE 2 0.6887 2 0.6245 0.6870 0.7495 0.0007 0.0007 0.0007 5 0.6880 5 0 0.6875 0 0.8745 0.9058.242.3742.6242.7492.8742.9990 2.240 2.2490 2.4990 2.565 0.0008 0.0008 0.0008 0.0008 0.0008 0.0007 0.0007 0.0007 0.0007 0.0007 0.0007 0.0008 0.0008 0.0008 0.0008 0.0008 0.0008 0.8755 0.9068.255.3755.6258.7508.8758 2.000 2.260 2.250 2.500 2.5635 0.8750 0.9603.250.3750 2.225.8750 2.250 2.2500 2.5000 2.5625 0.003 0.003 0.003 0.006 0.006 0.006 0.006 0.006 BEARING BORE DIAMETER MAX MIN 0.875 0.805 0 0.2495 0.325 0.320 0 0.3745 0 0.4995 0.5625 0.5620 0 0.6245 0 0.7495 0.8750 0.8745.0000 0.9995.250.245.2500.2405.325.320.3750.3745 MAX 0.870 0 0.325 0 0 0.5625 0 0 0.8752.0002.252.2502.327.3752 MIN 0.865 0.2495 0.320 0.3745 0.4370 0.4995 0.5620 0.6245 0.7495 0.8747 0.9997.247.2497.322.3747 SHAFT FITS SHAFT ROTATING Shaft Theoretical Dia Fit TIGHT 0.0007 0.0007 0.0007 0.0007 0.0007 0.0007 LOOSE 0.0003 0.0003 0.0003 0.0003 0.0003 0.0003 SHAFT STATIONARY Shaft Theoretical Dia Fit MAX TIGHT 0.865 0.2490 0.35 MAX 0.870 0.2495 0.320 0.3745 0.4370 0.4995 0.5620 0.6245 0.7495 0.8745 0.9995.245.2495.320.3740 0.3740 0.4365 0.4990 0.565 0.6240 0.7490 0.8740 0.9990.240.2490.35.3740 LOOSE 27

AGRICULTURE Applications The Nice 7227-4V stud mounted cam follower bearing is utilized in hay tine rake applications. It employs specially designed heavy duty seals to withstand the harsh working environment. It features an internal hex socket for ease of installation. The Nice 822-TN radial ball bearing features special land riding seals and an extended inner ring. It is dimensionally unique and is used in hay baler rakes to support the tine bar shafts. It is designed to withstand the harsh environment and heavy loads that it encounters. The 8403-V is another radial ball bearing cam follower. It is used to guide hay rake tine bars on agricultural equipment. It features a spherical O.D. to accommodate any angular misalignment. It has two seals on one side and a fully enclosed dust shield on the other to keep dirt and hay debris out of the bearing. www.rbcbearings.com 28

SPECIALS and Applications PUMPS AND METERS The 7473-J radial bearing features all stainless steel construction including the ball retainer. This precision ground bearing is used in a gas meter pump where it is immersed in gasoline. It therefore is not lubricated. This application requires a high degree of corrosion resistance, accuracy, and reliability. CANNING AND BOTTLING MACHINERY URETHANE TIRE The 837-TN is a fully ground radial ball bearing featuring a molded urethane tire on the O.D. of the bearing. It is used in a bottle making machine to guide the bottles. The soft urethane tire minimizes handling damage due to contact with the bearing. WOODWORKING MACHINERY The Nice 8224-TN is a fully ground radial ball bearing featuring a track wheel configuration on the O.D. of the bearing. In addition, there is a fourpoint contact in the ball grooves to minimize the radial and axial play. This bearing is used to guide a radial arm saw along a linear track. Accuracy and repeatability are paramount in this application. COMMERCIAL MOWERS LOW TORQUE SEALS The Nice 7488-8 TNN RLD radial ball bearing is unique due to its ground inch dimension bore and the ground metric O.D. It is used in a variety of applications including lawn mower decks and conveyors. It features low torque seals for easier start up and a special radial play range for pre-loading. The seals also have an outboard dust shield for protection from debris. 29

MATERIAL Handling The CONV3Y4-TN is a fully ground conveyor bearing for higher load ratings and ease of installation. It is used in material handling applications. It features a milled slot on the O.D. for ease of installation as well as a heavy-duty seal for protection from coal dust, dirt, etc. The fully enclosed dust shield, in addition to the solid washer in the bore, effectively eliminates lubricant leakage thus allowing for a sealed-for-life bearing. The CB504-TN heavy duty radial ball bearing is designed for long and dependable life in idler roller applications for bulk handling belt conveyors. The specially designed hexagonal bore accepts hexagonal shaped stub shafts in a ball and socket arrangement. This allows for a wide range of conveyor trough angles. SEAL HEX BORE DUST SHIELD The Nice 7868-5TN radial ball bearing features special low torque land riding seals. The seals also have an outboard dust shield for protection from debris. One application for this design is an idler sprocket in chain drives. It has an inch dimension unground bore to facilitate mounting on standard fasteners. The bearing internal geometry and outer ring O.D. are ground to precision tolerances for smoother operation. It also features an extended inner ring on both sides to accommodate mounting clearances. 30 www.rbcbearings.com

STEERING STEERING Column and Strut Bearings The Nice NB543-DCTN radial bearing is a fully ground double sealed thin section bearing. It is used in the headset of high-end bicycles. Because of shock loads, severe environmental conditions and the necessity of smooth feel for the rider, this bearing requires a high degree of accuracy and reliability. Unique metal backed nitrile seals are utilized to retain a special water-resistant grease for a greased for life bearing. The 8493-V is a thrust ball bearing in which one of the rings is partially encapsulated in plastic. It is used in front strut mount applications of front wheel drive automobiles. It has the advantage of combining low mounting height, low weight, and reduced operational noise. The Nice 8408-V is a full complement, angular contact ball bearing used in steering column applications. It incorporates precise yet economical solid races, and features a ground O.D. for close-tolerance housing fits. www.rbcbearings.com 3

Nice Speciality Bearings 50 Gehman Road Kulpsville, PA 9443 SKF USA Inc. -888-753-3477 MRC Bearing Services -800-MRC-7000 SKF USA Inc. is the authorized distributor for Nice Ball Bearings, Inc. SKF is a registered trademark of SKF USA Inc. Although care has been taken to assure the accuracy of the data compiled in this publication, SKF does not assume liability for errors or omissions. 2000 SKF USA Inc. Publication 990-700 (0M/FG 6/2000) version 6/2000 Printed in U.S.A.