STRONG PARTNERS. TOUGH TRUCKS. TM HIGH CAPACITY FORKLIFT TRUCKS H812XM6, H1316XM6 STAGE IIIB 8 16 kg @ 6mm
H816XM6 DISTINGUISHING MARKS 1.1 Manufacturer 1.2 Manufacturer s type designation 1.3 Drive: electric (battery or mains), diesel, petrol, LPG 1.4 Operator type: hand, pedestrian, standing, seated, orderpicker 1.5 Rated capacity/rated load Q (kg) 1.6 Load centre distance c 1.8 Load distance, centre of drive axle to fork x 1.9 Wheelbase y HYSTER HYSTER HYSTER H8XM6 H9XM6 H1XMS6 Diesel Diesel Diesel Seat Seat Seat 8 9 1 6 6 6 785 785 819 27 27 27 WEIGHTS 2.1 Service weight 2.2 Axle loading, laden front/rear kg 2.3 Axle loading, unladen front/rear kg 12413 12748 15287 19132 1881 2585 172 23144 217 634 619 6288 646 7943 7344 TYRES & CHASSIS 3.1 Tyres: L=pneumatic, V=solid, SE=pneumaticshaped solid 3.2 Tyre size, front 3.3 Tyre size, rear 3.5 Number of wheels, front / rear (x = driven wheels) 3.6 Track track, front b 1 3.7 Track track, rear b 11 L L L 9.2 14PR 9.2 14PR 1.2 16PR 9.2 14PR 9.2 14PR 1.2 16PR 4X 2 4X 2 4X 2 219 219 219 193 193 193 DIMENSIONS 4.1 Tilt of mast/fork carrige, forward / backward Degrees 4.2 Height, mast lowered h 1 4.3 Free lift h 2 4.4 Lift h 3 4.5 Height of mast, extended h 4 4.7 Height of overhead guard (cabin) h 6 4.8 Seat /stand h 7 4.12 Coupling h 8 4.17 Overhang l 5 4.19 Overall length l 1 4.2 Length to face of forks l 2 4.21 Overall width b 2 4.22 Fork dimensions s/e/l 4.23 Fork carrige ISO 2328, class/type A, B 4.24 Fork carriage width b 3 4.25 Distance between forkarms b 5 4.3 Reach, lateral from vehicle centerline b 8 4.31 Ground clearance, laden, below mast m 1 4.32 Ground clearance, centre of wheelbase m 2 4.34.1 Aisle width with pallets 1 2 long x 1 2 crossways Ast 4.35 Turning radius (outer) Wa 4.36 Internal turning radius b 13 15 12 15 12 15 12 4155 4155 4455 5339 5339 5346 6822 6822 7118 315 315 335 1742 1742 1762 635 635 655 89 89 89 5514 5514 5548 4294 4294 4328 2425 2425 2448 65/2/122 65/2/122 75/2/122 75 mm pin type 75 mm pin type 75 mm pin type 235 235 235 52 223 52 223 52 223 15 15 15 248 248 225 274 274 292 699 699 6133 3914 3914 3914 1433 1433 1432 PERFORMANCE DATA 5.1 Travel speed, laden / unladen Stage IIIA engine km/h 5.1 Travel speed, laden / unladen Stage IIIB engine km/h 5.2 Lifting speed, laden /unladen Stage IIIA engine m/sec 5.2 Lifting speed, laden / unladen Stage IIIB engine m/sec 5.2.1 Lifting speed, laden / unladen (12 ccm) Stage IIIA engine m/sec 5.2.1 Lifting speed, laden / unladen (12 ccm) Stage IIIB engine m/sec 5.3 Lowering speed, laden / unladen Stage IIIA engine m/sec 5.3 Lowering speed, laden / unladen Stage IIIB engine m/sec 5.5 Drawbar pull, laden / unladen Stage IIIA engine kn 5.5 Drawbar pull, laden / unladen Stage IIIB engine kn 5.7 Gradeability, laden / unladen @ 1.6 km/h km/hr Stage IIIA engine % 5.7 Gradeability, laden / unladen @ 1.6 km/h km/hr Stage IIIB engine % 5.9 Acceleration time, laden / unladen Stage IIIA engine s 5.9 Acceleration time, laden / unladen Stage IIIB engine s 5.1 Service brake 3.2 31 3.2 31 3.6 31.2 3.2 31 3.2 31 3.6 31.2.47.51.47.51.36.39.47.51.47.51.37.39.55.69.55.69.42.52.57.69.57.69.44.52.5.48.5.48.5.48.5.48.5.48.5.48 14.6 36 14.4 36.5 99.8 41.4 14.6 36 14.4 36.5 99.8 41.4 63 32 57 31 46 31 63 32 57 31 46 31 5.5 4.7 5.6 4.8 6.2 5.3 5.3 4.6 5.4 4.7 6 5.1 oilimmersed / wet disc oilimmersed / wet disc oilimmersed / wet disc ADDITIONAL DATA 1.1 Operating pressure for attachments bar 1.2 Oil volume for attachments l/min 1.3 Hydraulic oil tank capacity l 1.4 Fuel tank, capacity l 1.5 Steering design 1.6 Number of steering rotation 1.7 Sound pressure level at the driver s seat db(a) 1.7.1 Sound power level during the workcycle db(a) 1.8 Towing coupling, type DIN 193 193 193 1 1 1 1 1 1 128 128 128 hydrostatic hydrostatic hydrostatic 3.7 3.7 3.7 73 73 73 18 18 17 yes / Pin yes / Pin yes / Pin Specification data is based on VDI 2198 EQUIPMENT AND WEIGHT: Weights and axle loadings (lines 2.1, 2.2, 2.3) are based on the following specifications: H89XM6: Complete truck with fully equipped cab, with 5336 mm BOF (541 mm TOF) 2stage lfl mast, 235 mm wide Integral Sideshift carriage and 122 mm long forks. H112XM6: Complete truck with fully equipped cab, with 5336 mm BOF (5411 mm TOF) 2stage lfl mast, 235 mm wide Integral Sideshift carriage and 122 mm long forks. 16
HYSTER HYSTER HYSTER HYSTER HYSTER 1.1 H1XM6 H12XM6 H13XM6 H14XM6 H16XM6 1.2 Diesel Diesel Diesel Diesel Diesel 1.3 Seat Seat Seat Seat Seat 1.4 1 12 13 14 16 1.5 6 6 6 6 6 1.6 819 819 896 896 896 1.8 27 29 33 33 33 1.9 1518 1634 18429 1964 2119 2.1 2288 2336 2576 231 29391 2121 3768 2336 33613 2517 2.2 7969 7211 7875 8159 1376 853 1364 87 1343 9776 2.3 L L L L L 3.1 1.2 16PR 1.2 16PR 12.2 16PR 12.2 16PR 12.2 16PR 3.2 1.2 16PR 1.2 16PR 12.2 16PR 12.2 16PR 12.2 16PR 3.3 4X 2 4X 2 4X 2 4X 2 4X 2 3.5 2 19 2 19 2 276 2 276 2 276 3.6 1 93 1 93 2 2 2 3.7 15 12 15 12 15 12 15 12 15 12 4.1 4455 4455 4466 4466 4466 4.2 4.3 5346 5346 531 531 531 4.4 7118 7118 712 712 712 4.5 335 335 364 364 364 4.7 1762 1762 1791 1791 1791 4.8 653 653 684 684 684 4.12 89 89 89 89 89 4.17 5748 5748 6225 6225 6225 4.19 4528 4528 55 55 55 4.2 2448 2448 267 267 267 4.21 75/2/122 75/2/122 9/2/122 9/2/122 9/2/122 4.22 75 mm pin type 75 mm pin type 85 mm pin type 85 mm pin type 85 mm pin type 4.23 235 235 25 25 25 4.24 52 223 52 223 52 238 52 238 52 238 4.25 15 15 2 2 2 4.3 225 225 178 178 178 4.31 292 292 346 346 346 4.32 6333 6333 688 688 688 4.34.1 4111 4111 4584 4584 4584 4.35 1475 1475 1754 1754 1754 4.36 3.6 31.2 3.5 31.1 26.6 28 26.6 28 26.3 27.3 5.1 3.6 31.2 3.5 31.1 26.6 28 26.6 28 26.3 27.9 5.1.36.39.36.39 5.2.37.39.37.39 5.2.42.52.42.52.34.41.34.41.34.41 5.2.1.44.52.45.52.36.41.36.41.36.41 5.2.1.5.48.5.48.5.48.5.48.5.48 5.3.5.48.5.48.5.48.5.48.5.48 5.3 99.8 41.4 99.2 44.9 118.6 51.4 113.4 52.9 113 53.8 5.5 99.8 41.4 99.2 44.9 118.6 51.4 113.4 52.9 113 53.8 5.5 46 31 38 3 45 33 38 33 35 31 5.7 46 31 38 3 45 33 38 33 35 31 5.7 6.2 5.3 6.2 5.3 6.3 5.4 6.4 5.5 6.5 5.6 5.9 6 5.1 6.1 5.2 6.1 5.3 6.2 5.4 6.3 5.5 5.9 oilimmersed / wet disc oilimmersed / wet disc oilimmersed / wet disc oilimmersed / wet disc oilimmersed / wet disc 5.1 193 193 193 193 193 1.1 1 1 1 1 1 1.2 1 1 14 14 14 1.3 128 128 128 128 128 1.4 hydrostatic hydrostatic hydrostatic hydrostatic hydrostatic 1.5 3.7 3.7 3.7 3.7 3.7 1.6 73 73 73 73 73 1.7 17 17 17 17 17 1.7.1 yes / Pin yes / Pin yes / Pin yes / Pin yes / Pin 1.8 DISTINGUISHING MARKS WEIGHTS TYRES & CHASSIS DIMENSIONS PERFORMANCE DATA ADDITIONAL DATA H1316XM6: Complete truck with fully equipped cab, with 531 mm BOF (54 mm TOF) 2stage lfl mast, 25 mm wide Integral Sideshift carriage and 122 mm long forks. (Note: Truck weight with open operator module instead of fully equipped cab is 4 kg less. For axle loadings with open operator module: Deduct 5 kg from the rear axle loadings and deduct 35 kg from the front axle loadings.) 17
MAST AND CAPACITY INFORMATION H81XMS6 RATED CAPACITY KG@ 6 MM LOAD CENTRE Lift h 3 Lowered h1 Free lift h 2 Overall extended h 4 Without Sideshift (kg) H8XM6 H9XM6 H1XMS6 H8XM6 With Sideshift (kg) H9XM6 H1XMS6 2Stage standard 3Stage Full free lift 375 465 54 56 6 65 7 3329 3779 4155 321 3154 3321 3487 141 1534 171 1867 5172 672 6822 76 746 796 846 8 6 8 6 8 6 7 3 7 16 6 98 6 78 9 5 9 5 9 5 8 2 8 6 7 86 7 64 1 6 1 6 1 6 974 968 944 918 8 8 8 78 694 676 658 9 9 9 798 782 764 742 1 1 1 918 914 89 87 H112XM6 RATED CAPACITY KG @ 6 MM LOAD CENTRE Lift h 3 Lowered h 1 Free lift h 2 Overall extended h 4 Without Sideshift (kg) With Sideshift (kg) H1XM6 H12XM6 H1XM6 H12XM6 375 363 547 1 45 12 7 1 12 2Stage standard 465 54 62 48 4455 4855 637 712 792 1 45 1 45 1 45 12 7 12 7 12 7 1 1 1 12 12 12 67 515 842 1 3 12 4 9 7 11 7 3Stage Full free lift 56 6 65 7 346 3179 3346 3512 1436 157 1735 19 73 743 793 843 1 6 9 9 9 68 9 64 11 24 11 24 11 2 1 78 9 44 9 28 9 8 8 86 1 72 1 56 1 36 1 14 H1316XM6 RATED CAPACITY KG @ 6 MM LOAD CENTRE Lift h 3 Lowered h1 Free lift h 2 Overall extended h 4 Without Sideshift (kg) H13XM6 H14XM6 H16XMS6 With Sideshift (kg) H13XM6 H14XM6 H16XMS6 375 364 547 13 6 15 16 4 13 14 16 2Stage standard 465 54 62 49 4466 486 637 712 792 13 6 13 6 13 6 15 15 15 16 4 16 4 16 4 13 13 13 14 14 14 16 16 16 67 511 842 13 45 14 8 16 2 12 7 13 8 15 8 3Stage Full free lift 44 5 6 7 37 327 36 394 13 15 183 216 68 668 768 868 12 8 12 74 12 34 11 76 13 72 13 26 13 26 12 68 15 6 15 54 15 12 14 52 11 94 11 88 11 52 1 98 12 82 12 76 12 38 11 84 14 62 14 56 14 16 13 6 The capacities quoted are in conformance with the ISO 174 standard for stacking and travelling POWERTRAINS 1.3 Drive: electric (battery or mains), diesel, petrol, LPG Diesel Diesel Diesel POWER UNIT 7.1 Engine manufacturer/type 7.2 Engine power according ISO 1585 (nominal) kw @rpm 7.2.1 Engine power according ISO 1585 (maximum) kw @rpm 7.3 Rated speed min 1 7.3.1 Torque (maximum) Nm@rpm 7.4 Number of cylinders/displacement cm 3 7.5 Fuel consumption according VDI cycle l/h Cummins QSB 6.7 Stage IIIA Cummins QSB 4.5 Stage IIIB Cummins QSB 6.7 Stage IIIB 116 @ 23 119 @ 23 122@23 116 @ 23 122 @ 22 125@22 23 23 23 597 @15 624 @15 732@15 6 / 67 4 / 45 6/67 DRIVE TRAIN 8.1 Type of drive unit 8.2 Transmission manufacturer/type 8.6 Wheel drive/drive axle manufacturer/type 8.11 Service brake 8.12 Parking brake hydrodynamic 3 speed hydrodynamic 3 speed hydrodynamic 3 speed ZF / WG161 ZF / WG161 ZF / WG161 Axle Tech / PRC 425 Axle Tech / PRC 425 Axle Tech / PRC 425 oilimmersed / wet disc oilimmersed / wet disc oilimmersed / wet disc dry disc on drive axle dry disc on drive axle dry disc on drive axle 18
TRUCK DIMENSIONS NOTE: Specifications are affected by the condition of the vehicle and how it is equipped, as well as the nature and condition of the operating area. If these specifications are critical, the proposed application should be discussed with your dealer. Bottom of forks Without load backrest h6 +/ 3% tolerance depend on tyre inflated pressure / or tyre brand Full suspension seat in depressed position Add 5mm with load backrest 5 Stacking aisle width is based on the V.D.I. standard calculation as shown on illustration. The British Industrial Truck Association recommends the addition of 1 mm to the total clearance (dimension a) for extra operating margin at the rear of truck. Gradeability figures (lines 5.7) are provided for comparison of tractive performance, but are not intended to endorse the operation of vehicle on the stated inclines. Follow instructions in the operating manual regarding operation on inclines. Optional equipment Optional on models H812XM6 in XM version, standard on H1316XM6 in XM version. Measured according to the test cycles and based on the weighting values contained in EN1253. = Centre of gravity of unladen truck AST = Wa + X + l6 + a (if b12/2 < b13) AST = Wa + (l6 X ) 2 + (b12 b13) 2 + a (if b12/2 > b13) a = Minimum operating clearance (V.D.I. standard = 2 mm BITA recommendation = 3 mm) L6 = load lengths b12 = load width Data available on request, as values are dependent on application MAST TABLES: Add 25 mm if optional 1. x 2 tyres are fitted RATED CAPACITIES Rated load (kg) Load centre Load centre Distance from front of forks to centre of gravity of load. Rated load Based on vertical mast. H16XM6 H14XM6 H13XM6 H12XM6 H1XM6 H9XM6 H8XM6 NOTICE: Care must be exercised when handling elevated loads. When the carriage and/or load is elevated, truck stability is reduced. It is important that mast tilt in either direction be kept to a minimum when loads are elevated. Operators must be trained and adhere to the instructions contained in the Operating Manual. Hyster products are subject to change without notice. Lift trucks illustrated may feature optional equipment. Safety: This truck conforms to the current EU requirements. 19
TM STRONG PARTNERS. TOUGH TRUCKS. FOR DEMANDING OPERATIONS, EVERYWHERE. Hyster supplies a complete range of warehouse equipment, IC and electric counterbalanced trucks, container handlers and reach stackers. Hyster is committed to being much more than a lift truck supplier. Our aim is to offer a complete partnership capable of responding to the full spectrum of material handling issues: Whether you need professional consultancy on your fleet management, fully qualified service support, or reliable parts supply, you can depend on Hyster. Our network of highly trained dealers provides expert, responsive local support. They can offer costeffective finance packages and introduce effectively managed maintenance programmes to ensure that you get the best possible value. Our business is dealing with your material handling needs so you can focus on the success of your business today and in the future. HYSTER EUROPE Flagship House, Reading Road North, Fleet, Hants GU51 4WD, England. Tel: +44 () 1252 81261 www.hyster.eu @ infoeurope@hyster.com /HysterEurope @HysterEurope /HysterEurope www.hysterbigtrucks.com HYSTER and FORTENS are registered trademarks in the European Union and certain other jurisdictions. MONOTROL is a registered trademark, and DURAMATCH and are trademarks in the United States and in certain other jurisdictions. Hyster products are subject to change without notice. Lift trucks illustrated may feature optional equipment. A division of NACCO Materials Handling Limited. Form number: 91254/4. Printed in England. TLC/3/13