ACCESSORIES AND DIAPHRAGM SEAL TA102 TA201 TA202 TA203 TD101 TD103 TD104 TD202 Data sheet H20022a 05/2017 TD301 TD302 TD303 Trafag Italia Srl Via Cremona 1 20025 Legnano (Mi) Tel. +39 0331 59 23 97 Fax +39 0331 59 98 15 www.trafagitalia.com info@trafagitalia.com
GAUGE SIPHON TA102 FEATURES 3 different loop designs Tig welded & hydro-tested Seamless Standard pipes specifications construction Threads welded Max Type working pressure 160 bar Max working temperature 400 C Material connection 1 APPLICATION Rigid Construction STANDARD SPECIFICATIONS 2 different loop designs Tig welded & hydro-tested Seamless pipes construction GAUGE SIPHON Threads welded Max working pressure 160 bar Max working temperature 400 C Coiled type ½" BSP or ½ NPT (F) Pipe size & schedule Pipe ½" Schedule 80 type connection 1 Maximum working pressure Weld-in connection ½" BSP or ½ NPT (M) 160 bar Type : Pattern 1 (Coiled type) Heat dispenser for gauges, Material : switches & transmitters Maximum working temperature connection 400 C : ½" Pipe-end Boilers Pipe size & schedule : Pipe ½" Sch 40 1) Other process/instruments connections are available type through adaptors. : Weld-in connection connection : ½" Pipe-end Maximum working pressure : As per PT chart Maximum working temperature : As per PT chart Note General Tolerance in total length : ±10 mm, Ø : ±2 mm A102 DIMENSIONAL DRAWING Pipe Pipe Size Size as as per Schedule Pipe Size as per Schedule Pattern 1 Pattern 1 Pattern 1 Ø Ø61.5 ~ Ø61.5 ~ 270.0 270.0 Pattern 2 Pattern 2 Pipe Size Pipe as Size per as per Schedule Ø61.50 Ø 61.50 ~ All dimensions are in mm. All dimensions are in mm. ~ 270.0 www.itec.it www.itec.it A1-03 A1-03 H20022a 2/13
PULSATION DAMPENER / GAUGE SNUBBER All SS construction Adjustable needle design TA201 Standard specifications Type Adjustable needle Material connection 1 ½" NPT (F) connection 1 ½" NPT (M) Gaskets / Seals Viton Maximum working pressure 400 bar Maximum working temperature 180 C 1) Other process/instruments connections are available through adaptors. HEX 27 Adjustable Screw 61 H20022a 3/13
OVERLOAD PROTECTOR / GAUGE SAVER TA202 Adjustable ranges Bellow & Piston operated Over-pressure up to 600 bar Standard specifications Type Working range Material connection 1 connection 1 Gaskets / Seals Maximum working pressure Type and Ranges Sq. Body Sq.Body Pattern 1, 2 Bellow type A202 Bellow or Piston 200 mbar 400 bar ½" NPT (F) ½" NPT (M) Viton 600 bar Operating temperature 180 C 1) Other process/instruments connections are available through adaptors. 75 30 75 Bellow 0... 1,6 bar OVERLOAD PROTECTOR / GAUGE 0... 2,5 SAVER bar Range Range Adjustable Adjustable Nut Nut DIMENSIONAL DRAWING Ranges 0... 200 mbar 0... 400 mbar 0... 600 mbar 0... 1 bar 0... 4 bar Ranges 0... 6 bar 0... 10 bar 0... 16 bar 0... 25 bar 0... 40 bar 0... 60 bar 0... 100 bar 0... 160 bar 0... 250 bar 0... 400 bar connection Sq. Body Sq.Body 75 30 connection Piston type Pattern 3, 4, 5, 6, 7 65 Piston Range Adjustable Nut Nut ORDERING CODES H20022a 4/13 1. TYPE 4. PROCESS CONNECTION 3 14N 1 Pattern 1 (200 mbar 1.6 bar) 12B ¼" BSP (M) 2 2 Pattern 2 (2.5 4 bar) 13B 3/8" BSP (M)
COOLING TOWER TA203 All SS construction 4 variable designs Standard specifications Type 5 cooling fins Material connection 1 1/2" NPT or ½ BSP (F) connection 1 1/2" NPT or ½ BSP (M) Maximum working pressure 1000 bar Maximum working temperature 300 C 1) Other process/instruments connections are available through adaptors. Pattern 4 Cooling Fins mm Total Length 85 H20022a 5/13
THREADED DIAPHRAGM SEAL TD101 Forged chambers Rigid construction Laser welded diaphragm Optional exotic materials Range type -1... 0 to 0... 70 bar (Type S01) 0... 100 to 0... 160 bar (Type S02) 0... 210 to 0... 400 bar (Type S03) Top chamber material Gaskets Bottom chamber material connection 1 connection AISI 304 SS, laser welded on upper part PTFE Silicon DC 200 (-40 205 C) ½ NPT (M) or ½ BSP (M) Type S01 Type S02 Type S03 Ø 98.0 Ø 80.0 Ø 110.0 H20022a 6/13
THREADED DIAPHRAGM SEAL TD103 Economical and light weight All welded construction Laser welded diaphragm Range type -1... 0 to 0... 2,5 bar (Type S11) 0... 4 to 0... 70 bar (Type S12) 0... 100 to 0... 250 bar (Type S13) 0... 280 to 0... 600 bar (Type S14) Chamber material connection 1 connection Silicon DC 200 (-40... 205 C) ½ NPT (M) or ½ BSP (M) H20022a 7/13
Type S11 TD103 Welded Joint Ø 62.2 Type S12 Example for female process connection Welded Joint Ø 55.0 Type S13 Type S14 Welded Joint Welded Joint Ø 46.5 Ø 34.0 H20022a 8/13
THREADED DIAPHRAGM SEAL TD104 One piece construction Laser welded diaphragm Flushed diaphragm Ideal for Transmitters Range type 0... 4 to 0... 600 bar 2 Body material connection 1 connection 2) Refer range vs connection table Silicon DC 200 (-40... 205 C) see table G1 SW H I dm G d G PN dm 1 G1 SW d I H Range (bar) ½ 600 17 ¼ or ½ 30 26 20 45 0... 70 to 0... 700 ¾ 600 22 ¼ or ½ 32 32 20 45 0... 40 to 0... 700 1 600 25 ½ 41 39 28 66 0... 25 to 0... 700 1 ½ 600 40 ½ 55 55 30 68 0... 4 to 0... 600 1) dm = Effective diameter of diaphragm. H20022a 9/13
FLANGED DIAPHRAGM SEAL TD202 Large volume type design Flush diaphragm Laser welded diaphragm Optional flushing ring Optional exotic materials Range type -1... 0 to 0... 400 bar (Type S45) 0... 4 to 0... 400 bar (Type S46) Chamber material / Flange material connection 1 connection Flange facing type Type S45 Silicon DC 200 (-40... 205 C) Flange as per ANSI B16.5 / EN1092-1 Raised face Type S46 b Flange b Flange d4 K D d4 K D flanges according to DIN EN 1092-1 flanges according to ANSI B16.5 DN PN b d4 k D SIZE RATING b d4 k D 25 10-40 18 68 85 115 1 150# 14,2 50,8 79,2 108 25 50 17.5 50.8 88.9 124 1 300# 17,5 50,8 88,9 123,9 25 63-100 24 68 100 140 1 400-600# 23,9 50,8 88,9 124 40 10-40 18 88 110 150 1 ½ 150# 17,5 73,2 98,6 127 40 50 20.6 73 114.3 156 1 ½ 300# 20,6 73,2 114,3 155,4 40 63-100 28 88 125 170 1 ½ 400-600# 28,8 73,2 114,3 155,4 50 10-16 18 102 125 165 2 150# 19,1 91,9 120,7 152,4 50 25-40 20 102 125 165 2 300# 22,4 91,9 127 165,1 50 100 30 102 145 195 2 400-600# 31,8 91,9 127 165,1 H20022a 10/13
SANITARY DIAPHRAGM SEAL TD301 Quick connect/disconnect Laser welded flush diaphragm Tri-clamp connection Range type -1... 0 bar to 0... 40 bar Tri-Clover (Type S31 or S32) Chamber material connection 1 Food Grade oil [-20 C to 140 C] connection 1 up to 2.5 Type S31 Type S32 35.0 44.0 OD OD size vs range chart Thread size 1 1 ½" 2 2 ½" Size (OD) in mm 35 38 48 62 Range (bar) 0... 4 to 0... 40 0... 2 to 0... 40 0... 1 to 0... 40-1... 0 to 0... 40 H20022a 11/13
SANITARY DIAPHRAGM SEAL TD302 Quick connect/disconnect Laser welded flush diaphragm DIN, SMS connections Range type 0... 1 to 0... 40 bar Chamber material connection 1 Food Grade oil [-20 C to 140 C] connection Union-nut (DIN 11851 / SMS / RJT/APV / IDF/ISS) Standard: DIN 11851 Standard: SMS 35.0 35.0 OD DIN Female SMS Female. OD size vs range chart DIN SMS Size 25 32 40 50 80 Size (OD) in mm 35 38 48 59 80 Range (bar) 0... 4 to 0... 40 0... 2 to 0...40 0... 1 to 0... 40 0... 1 to 0... 40-1... 0 to 0... 40 Size 1 1 ½ 2 - - Size (OD) in mm 30 45 58 - - Range (bar) 0... 4 to 0... 40 0... 2 to 0... 40 0... 1 to 0... 40 - - H20022a 12/13
SANITARY DIAPHRAGM SEAL TD303 Quick connect/disconnect Laser welded flush diaphragm DIN, SMS connections Range type 0... 1,6 to 0... 40 bar DIN 11851 Chamber material connection 1 Glycerine [10 C to 150 C] connection 1.5 Capillary for remote mounting Optional Standard: DIN 11851 Standard: SMS 42.0 42.0 OD DIN Male OD SMS Male size vs range chart DIN SMS Size 25 32 40 50 80 Size (OD) in mm 35 38 48 59 80 Range (bar) 0... 4 to 0... 40 0... 2 to 0...40 0... 1 to 0... 40 0... 1 to 0... 40-1... 0 to 0... 40 Size 1 1 ½ 2 - - Size (OD) in mm 30 45 58 - - Range (bar) 0... 4 to 0... 40 0... 2 to 0... 40 0... 1 to 0... 40 - - Additional information Documents Data sheet H20022 www.trafag.com/h20022 H20022a 13/13