ARI Air Release Valves High air discharge air release valve Patented conical body design Threaded and flanged ends Combination air/vacuum Kinetic/automatic air release 1 to 8 AUMA Electric Actuators and Valve Gearboxes Multi-turn, quarter-turn actuators and gearboxes Lever and linear actuators Up to 265,000 ft-lbs. Boehmer District Heating Ball Valves Fully welded design Forged steel material with full penetration weld construction Full or reduced port 2 to 48 ASME 150 class Boehmer Fully Welded Ball Valves Pipeline ball valve, double block and bleed Natural gas transmission/distribution Oil and gas Emergency sealant injection, PMSS sealing system 2 to 56 ASME 150 to 2500 class Camseal Ball Valves Metal seated, unibody construction Zero leakage Top entry pressure seal In-line renewable in minutes with cartridge assembly Up to ASME 4500 class Clampseal Globe Valves Available in angle, Y, or T pattern Pressure-assisted seal bonnet In-line repairable Up to ASME 4500 class Cryogenic Valves Single-piece stainless steel gland Forged stainless steel body Solid Stellite seat and disc In-line repairable ASME 1500 and 2500 class Throttling Valves Easy-to-read position indicator Pressure-assisted seal bonnet Replaceable seat/venturi Available in tandem configuration /HILTAP High-Pressure/Temperature Vents and Drains Hydrocarbon vents and drains Secondary leak containment Pressure-assisted seal bonnet Double isolation ¾ to 2 Up to ASME 4500 class Dragon 2Y Needle Valves High-pressure/temperature Carbon and 316 stainless steel Metal-to-metal seat (Stellite seat available) ¼, ⅜, ½ ASME 2500 class; up to 1125 F
Fossil Power Systems Aquarian Electronic Level Indicators No moving parts Solid state electronics & two-colour display NEMA 4x enclosure Swaged style high-pressure brazed probe Various electronic models available to support 1 through 48 probe levels Probe rating 3000 psi @ 1200 F Fossil Power Systems Aquarian Visual Gauges Bi-coloured ported gauge with LED illuminator No hot retorquing necessary Double mica provides extended port life Fulfills ASME Boiler & Pressure Code 1 PG-60 Flat glass and reflex gauges for lower pressure Up to 3000 psi Fossil Power Systems Fuel Gas and Liquid Handling Valves Automated and manual CSA 6.5-2000 / ANSI Z21.21 CGA 3.9 M94 Fire safe API 607 FM class 7400 FNPT ½ to 2 Flanged ½ to 6 ASME 150 and 300 class HILTAP RapidLok Series Safety Quick Couplings Metal-to-metal seal Leakproof operation Safe venting of residual pressure ¾ to 2 Equal to ASME 900/1500/2500 Attemperators/Desuperheaters Types: Multi-nozzle spray (standard and cooled); Steam atomized; Venturi Venturi nozzles atomize spray water Integral pressure control Electric and pneumatic actuation ASME 600 to 2500 class Automatic Pump Recirculation Valves On/off recirculation flow control Minimum flow Ensures pump protection No pneumatic or electrical connections 1¼ to 8, larger sizes available ASME 150 to 1500 class Control Valves High and low load designs Water, feedwater and steam Buttweld or flange connection Pneumatic, electric or hydraulic actuation Up to 24 ASME 300 to 2500 class Gas Control Valves Transmission and storage applications Turbine bypass valves Anti-surge and emergency shutdown for compressors Axial control valves for storage applications Gas pressure let down Up to 20 (DN 500) ASME to 1500 class Steam Conditioning Valves Combined pressure-reducing and desuperheating Globe, angle or z-style Carbon steel, stainless steel and other alloys Buttweld or flanged ends Up to ASME 1500 class Turbine Bypass Systems Custom engineered 100% of capacity of turbine High/intermediate/low pressure designs
Duck Bill Check Valves Exterior mount or internal installation Flanged or slip-on connection Open and enclosed designs NSF approved 1 to 60 Expansion Joints Prevent pipe displacement/stress and reduce noise and vibration Customizable to suit the application Single or multiple arch Standard design ships from stock Pinch Valves Full round Single pinch Pre-pinched Manual, electric, or pneumatic actuator On/off and modulating service ½ to 36 Pressure Sensors Modular seals for in-line maintenance Up to 3 instruments per ring Combinations to suit the application Guaranteed to never clog or plug Flanged, screw-on, tri-clover connections Available with gauges, pressure switches, and transmitters 1 to 42 Persta High-Pressure Forged Valves Gate, globe, check and line blinds Forged steel and alloy materials ½ and larger ASME 900 to 4500 class /Fetterolf Cam-Set, Cam-Slide, Cam-Goggle, and Stacey Line Blinds Positive isolation; fast changeover No flange separation required for Cam-Set/Slide/Goggle Buttweld and flanged ends Carbon and stainless steel Up to 60, larger sizes upon request ASME 150 to 1500 class; higher upon request Changeover Valves Tandem changeover valve design Carbon steel and alloy materials 1 to 14 Disc Bottom Outlet Valves Metal-to-metal positive shutoff PTFE disc and seat optional Disc lowering or rising design Dead space free and crust breaking 1 to 24 Diverter Valves 3,4,5 and multiple inlets and outlets Metal-to-metal seated Contoured ram, heating jacket, flushing ports optional Diverse body designs Dead space free 1 to 18 Lift Plug Valves Ideal for high-temp. and highly abrasive, clogging applications IsoPlug design: isolates media flow SwitchPlug design: switches between 3 inlets TruEPlug design: double block and bleed in one enclosed body Materials CS and C12A (to 36 )
Ram Bottom Outlet Valves Metal-to-metal positive shutoff Self-draining and dead space free at inlet Special body/trim materials: titanium; Hastelloy; duplex stainless steel Multistage and cage release design for pressure letdown optional 1 to 24 Sampling Valves Metal-to-metal or PTFE positive shutoff Non-clogging/dead space free Ram and disc type PTFE or graphite packing Wafer and integral pipe design Bottle systems available ½ to 1½ Up to ASME 600 class Severe Service Angle Control Valves Custom designs Cast or forged Special body/trim materials: titanium; Hastelloy; Inconel; tungsten carbide; ceramic 1 to 36 Tank Emergency Shut-Off Valves Designed for storage tanks, as required by API 625 Engineered to shut off on loss of power, or valve damage Available in disc, bottom outlet, lift plug SOMAS Ball Segment Valves Control and on/off Stainless steel and exotic alloys Metal and soft seated 1 to 10 standard, up to 28 ASME 150 to 600 class SOMAS Butterfly Valves High-performance, triple offset Stainless steel and exotic alloys Isolation and control Metal and soft seated Inherently fire safe 3 to 48 ASME 150 to 600 class HG Knife Gate Valves Bidirectional operation Through-going gate High pulp stock consistency Mounts between ANSI 125/150 flanges 3 to 32 MV Knife Gate Valves One-piece body design (up to 24 ) Suited for a wide range of applications Modular design, easy to maintain Metal and soft seats 2 to 40 in stainless steel or ductile iron RKO Knife Gate Valves Round inlet and square outlet Suited for extreme process conditions Design minimizes clogging/choking High density cleaner valves Scavenger dump valves Cast iron and stainless steel 4 to 24 SLV/F/H/X Knife Gate Valves Slurry and abrasive applications Bidirectional Full bore for max flow capacity One- or two-piece body design 2 to 48 V: fully lugged (MWP 150 psig) F: fully flanged (MWP 150 psig) H: high pressure (MWP 290 psig) X: higher pressure (MWP 720 psig)
TVE Knife Gate Valves Transmitter and instrument isolation All stainless steel construction All stainless steel ratchet mechanism Special tank connection flange 3 ANSI 150 class WB14 Knife Gate Valves Dual seated, fully lugged, non-rising stem Bidirectional, for dead end service Ductile iron and stainless steel body options One- or two-piece body design 2 to 48 Stainless Valve Co. O-Port Slide Gate Valves The flat ball valve Tight shutoff in severe applications Custom designed to application Slurry applications ASME 150 to 900 xanik High-Pressure Cast Valves Gate, globe, T and Y, stop check, tilting disc check Bolted bonnet and pressure seal Steam, high-pressure water, gases and liquids HF alkylation service ½ to 36 ASME 600 to 4500 class ZWICK Triple Offset (TOV) Butterfly Valves Metal-to-metal seat Bidirectional Double block and bleed Tilting disc check valve Fully lugged, butt weld, and gate valve face-to-face Fire safe BS 6755 and API 607 2 to 88 (DN 50-2200) ASME 150 to 900 class
Actuation Solutions and Services From sizing and selection to adaption and mounting, we provide a single source for complete valve assemblies for your most demanding valve applications. We have experience mounting the following brands of actuators: SERVICES Assembly and Function Testing Our technicians are factory-trained by our manufacturers and are available to perform routine maintenance and repair of Armour Valve supplied assemblies either at our warehouse or on-site at your facility. In-house and On-site Service and Repair We mount and stroke test all completed valve assemblies to ensure proper function and that required stroke times are met. Inspection reports are available upon request. For service, contact your local sales representative or customercare@armourvalve.com Head Office 126 Milner Avenue Toronto, ON M1S 3R2 tel 416-299-0780 fax 416-299-0394 Western Region Office/Stocking Warehouse 6, 2221-41 Avenue NE Calgary, AB T2E 6P2 tel 403-229-3171 fax 403-245-9297 Sales Representatives Atlantic & Quebec Ontario West/East Saskatchewan Alberta Central/South Fort McMurray British Columbia North/South Ext 131 176/134 174 161/162 131 162/161 www.armourvalve.com sales@armourvalve.com 1-800-268-3508