CAST BODY WEDGE GATE VAVES FIG. 20-150, STAINESS STEE - CASS 150 D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. TFE impregnated packing for temperature to 450 o F/232 o C and P 2-12. Precision machined flexible wedge gate and seat for light shut-off. Fully guided gate to ensure alignment. Outside screw and yoke, non-rising handwheel, rising stem. Two piece yoke and bonnet assembly. Flanges match ASME B 16.5-150 bs standard. Serrated gasket faces. Face to face ASME B16.10 Designed to ASME B16.34 & API 603 tested to API 598 D esigned to handle corrosive fluids in the process industries FOW CONTRO
FOW CONTRO STAINESS STEE WEDGE GATE VAVES FIG. 20-150, STAINESS STEE - CASS 150 FIG 20B-150-CF8M (316) FIG 20-150-CG8M (31) Item Description Fig. 20B Fig. 20 1 Body 2 Disc C 3 Nut AISI 304 AISI 304 11 23 4 Bonnet-Bolt AISI 304 AISI 304 10 5 Packing TFE Impregnated TFE Impregnated 20 24 9 8 6 Gland Flange Gland ASTM A49 Gr.316 ASTM A49 Gr.31 8 Yoke Gr.CF8 Gr.CF8 13 14 6 9 Stem Sleeve SAE 660 (Bronze) SAE 660 (Bronze) 10 andwheel ASTM A536 Gr.60-42-10 18 19 11 andwheel Nut MS Plated Steel D (OPEN) 21 22 1 5 15 3 4 16 12 2 1 12 Stem ASTM A49 Gr.316 ASTM A49 Gr.31 13 Yoke Bolt AISI 304 AISI 304 14 Nut AISI 304 AISI 304 15 Bonnet 16 Gasket P.T.F.E. P.T.F.E. 1 Gland Bolt Pin AISI 304 AISI 304 18 Gland Bolt AISI 304 AISI 304 19 Gland Bolt Nut AISI 304 Nylock AISI 304 Nylock B 20 Sleeve Retainer AISI 304 AISI 304 21 Nameplate ASTM A240 Gr.304 ASTM A240 Gr.304 22 Rivets Aluminium Aluminium 23 ock Screw SS-Commercial Grade SS SS-Commercial Grade 24 Grease Nipple Cadmium Plated Steel Cadmium Plated Steel A DIMENSIONS - INCES Size 2 2.5 3 4 6 8 10 12 14 16 18 20 24 A.5 8 9 10.2 11.5 13 14 15 16 1 18 20 B 2 2.5 3 4 6 8 10 12 13.2 16 18 20 24 C 8 9 12 14 16 18 18 20 20 20 20 D 13.3 15.1 18.1 20.5 28 36.4 44.3 51. 60 66.5 3.5 80.5 94 Wt. lb. 44 50 55 80 130 220 348 480 600 830 900 1150 1520 DIMENSIONS - MIIMETERS Size 50 65 80 100 150 200 250 300 350 400 450 500 600 A 18 190 203 229 260. 292 330 356 381 406 432 45 508 B 51 63.5 8 102 152 203 254 305 336.5 400 450 500 600 C 18 18 203 229 305 356 406 45 45 508 508 508 508 D 338 386 461 520 14 925 1126 1314 1525 1689 183 2051 2388 andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. Also available in larger sizes, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Wt. Kg. 20 23 25 36 59 100 158 218 26 33 410 523 690 SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 2/16/11-20-150.4
CAST BODY WEDGE GATE VAVES FIG. 20-300, STAINESS STEE - CASS 300 D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. TFE impregnated packing for temperature to 450 F/232 C and P 2-12. Precision machined flexible wedge gate and seat for light shut-off. Fully guided gate to ensure alignment. Outside screw and yoke, non-rising handwheel, rising stem. Two piece yoke and bonnet assembly. Flanges match ASME B 16.5-150 bs standard. Serrated gasket faces. Face to face ASME B16.10 Designed to ASME B16.34 & API 603 tested to API 598 D esigned to handle corrosive fluids in the process industries FOW CONTRO
FOW CONTRO STAINESS STEE WEDGE GATE VAVES FIG. 20-300, STAINESS STEE - CASS 300 FIG 20B - CF8M (316) FIG 20 - CG8M (31) Item Description Fig. 20B Fig. 20 1 Body 2 Disc C 3 Nut AISI 304 AISI 304 11 23 4 Bonnet-Bolt AISI 304 AISI 304 10 5 Packing TFE Impregnated TFE Impregnated 20 24 9 8 6 Gland Flange Gland ASTM A49 Gr.316 ASTM A49 Gr.31 8 Yoke Gr.CF8 Gr.CF8 13 14 6 9 Stem Sleeve SAE 660 (Bronze) SAE 660 (Bronze) 10 andwheel Ductile Iron Ductile Iron 18 19 11 andwheel Nut AISI 304 D (OPEN) 21 22 1 5 15 3 4 16 12 2 1 12 Stem ASTM A49 Gr.316 ASTM A49 Gr.31 13 Yoke Bolt AISI 304 AISI 304 14 Nut AISI 304 AISI 304 15 Bonnet 16 Gasket S.W.316+PTFE S.W.316+PTFE 1 Gland Bolt Pin AISI 304 AISI 304 18 Gland Bolt AISI 304 AISI 304 19 Gland Bolt Nut AISI 304 Nylock AISI 304 Nylock B 20 Sleeve Retainer AISI 304 AISI 304 21 Nameplate ASTM A240 Gr.304 ASTM A240 Gr.304 22 Rivets Aluminium Aluminium 23 ock Screw SS-Commercial Grade SS-Commercial Grade 24 Grease Nipple Cadmium Plated Steel Cadmium Plated Steel A DIMENSIONS - INCES Size 2 3 4 6 A 8.50 11.12 12.00 15.88 B 2.00 3.00 4.00 6.00 C 8.00 12.00 12.00 14.00 D 18.83 22.13 25.29 35.29 Wt. lb 68.34 130 194 39.19 DIMENSIONS - METRIC Size 50 65 80 100 A 215.9 282.4 304.8 403.4 B 50.8 6.2 101.6 152.4 C 203.2 304.8 304.8 355.6 D 48.3 562.1 642.4 896.4 andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. s also available in larger sizes or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Wt. kg 31 59 88 12 SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 2/16/11-20-300.6
STAINESS STEE TITING DISK CECK VAVES FIG. 40, A CAST S.S. CONSTRUCTION Design Features Cast corrosion resistant stainless steel Availability; 2 1/2" thru 12" (14" thru 24" POA) Precision machined tilting disc and seat for tight shut-off in reverse flow direction. D esigned to handle corrosive fluids in the process industries Designed with off center pivot to avoid the tendency of the disc to slam on the seat and to aid the operation at low pressure differentials. Blow out proof gaskets. Can be installed in both the horizontal or vertical positions provided fluid flow is upward. 150 PSI Maximum working pressure. Rugged construction FOW CONTRO Flanges meet ASME B16.5 150 class bolt pattern and 150-250 serrated flange gasket faces
FOW CONTRO STAINESS STEE TITING DISC CECK VAVES FIG 40A-CF8 (304 SS) FIG 40B-CF8M (316 SS) FIG 40-CG8M (31 SS) FIG 40SMO-CK3MCUN Item Part 40A 40B 40 40SMO 6 5 8 1 Body Gr.CF8 2 Seat Gr.CF8 CK3McuN CK3McuN 3 Disc Gr.CF8 CK3McuN D1 D C 4 3 2 4. Pin ASTM A49 Gr.31 ASTM A49 Gr.316 5 Bolts AISI 304 6 Nuts AISI 304 ASTM A49 Gr.31 254SMO (UNS31254) 1 Gasket PTFE n h 8 NPT Plug AISI 31 254SMO (UNS31254) Also available in special alloys such as CNM (Alloy 20), Duplex SS, astelloy on request. SIZE D C n h D1 Wt. lb./kgs DIMENSIONS (INCES/MIIMETERS) 2.5 3 4 6 8 10 12 14 16 18 20 24 65 5 100 150 200 250 300 350 400 450 500 600 8.5 9.5 11 14 18 21.5 25.25 28 30 31 32.5 34 216 241 292 356 45 552 641 11 62 8 825 864.5 9 11 13.5 16 19 21 23.5 25 2.5 32 18 190 229 29 343 406 483 533 59 635 698 813 5.5 6.5 9.5 11.5 14.25 1 18.5 21.25 22.5 25 29.5 140 152 190 241 298 362 432 46 540 58 635 49 4 4 8 8 8 12 12 12 16 16 20 20 4 4 8 8 8 12 12 12 16 16 20 20 0.5 0.5 0.5 0.85 0.85 1 1 1.14 1.14 1.25 1.25 1.35 19 19 19 22 22 25 25 29 29 32 32 35.85 9.5 11.5 13.5 16 19 21 23.5 25 2.5 32 38.5 200 24.6 292 343 406 483 533 59 635 698.5 813 984 33 50 62 100 168 255 350 43 62 15 900 1320 15 22 26 45 6 116 160 215 285 325 410 600 SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com CAROTTE, NC P: 04.52.022 F: 04.52.091 ONG BEAC, CA P: 562.595.1811 F: 562.426.6016 BAKERSFIED, CA P: 661.322.1935 F: 661.322.619 REV-2014-0-09
CAST BODY SWING CECK VAVES FIG. 45-150, STAINESS STEE - CASS 150 FIG. 45-300, STAINESS STEE - CASS 300 D e s i g n F e a t u r e s Bolted cover. Precision machined disc and seat for tight D esigned to handle corrosive fluids in the process industries shut off in reverse flow direction. Teflon cover gasket for temperature to 450 F/232 C. Flanges match ASME B16.5-150 & 300 lbs. standards. Serrated gasket faces. Face to Face ASME B16.10. Designed to ASME B16.34, Tested to API 598 FOW CONTRO
FOW CONTRO STAINESS STEE - ORIZONTA SWING CECK VAVES 150/300 B FIG 45B-150-CF8M (316 SS) FIG 45-150-CG8M (31 SS) FIG 45B-300-CF8M (316 SS) FIG 45-300-CG8M (31 SS) 13 Item Part Fig. 45B Fig. 45 10 11 2 1 Body 2 Cover 5 6 4 8 12 1 3 Disc 4 inge 5 Pin ASTM A49 Gr.316 ASTM A49 Gr.31 6 Plug AISI 316 AISI 31 Disc Nut AISI 316 AISI 31 9 3 8 Washer AISI 316 AISI 31 9 Split Pin AISI 316 AISI 31 10 Studs AISI 304 AISI 304 11 Nuts AISI 304 AISI 304 12 Gasket P.T.F.E P.T.F.E 13 EyeBolt ASTM A36 ASTM A36 DIMENSIONS - INCES 150 0.5 0.5 1 1.5 2 2.5 3 4 6 8 10 12 FF () 4.25 4.60 5.0 6.5 8.0 8.5 9.5 11.5 14.0 19.5 24.5 2.5 T () 3.0 3.25 3.5 3.5 5.53 6.0 6.22.09 8.39 11.83 12.9 15.3 Wt. (lb) 9 13 15 22 28 3 48 5 11 234 331 518 Also available in special alloys such as CNm (Alloy 20), Duplex SS, astelloy on request. 300 0.5 0.5 1 1.5 2 2.5 3 4 6 8 10 12 FF () 6.0.0 8.5 9.5 10.5 11.5 12.5 14.0 1.5 21.0 24.5 28.0 T () 3.5 3.86 4.0 4.5 5.05 5.95 6.3.25 9.40 12.1 13.15 15.25 Wt. (lb) 12 1 20 26 28 52 68 110 220 450 650 85 DIMENSIONS - MIIMETERS 150 15 20 25 40 50 65 80 100 150 200 250 300 F.F () 108 11 12 165 203 216 241 292 356 495 622 698 T () 6 83 89 95 140.5 152.4 158 180 213 300.5 329.5 390.4 Wt. (lb) 4 6 10 13 1 22 34 53 106 150 235 300 15 20 25 40 50 65 80 100 150 200 250 300 F.F () 152 18 216 241 26 292 318 356 444 533 622 11 T () 89 98 102 116 129 151 160 184 238 309 334 388 Wt. (kg) 5.5. 9.1 11.8 12. 23.6 30.9 50.0 100.0 204.5 295.5 39. SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 2/26/11-45.4
INSTRUMENT ISOATING VAVE FIG. 50B (CF8M) WAFER STYE UGGED BA VAVE FIG. 50 (CG3M) WAFER STYE UGGED BA VAVE D e s i g n F e a t u r e s Investment cast stainless steel Transmitter isolating valve drilled to replace Designed to handle corrosive fluids in the process industries. either existing K.G.V. s or standard 150 drilling for new installations Glass filled teflon Seats 800 W.O.G. Rating - quarter turn actuation - only 2 between vessel flange and transmitter flange Face purge connection direct to transmitter side Body purge connection direct to ball cavity FOW CONTRO which is vented to tank side by three 1/8 holes
FOW CONTRO 2 Slots 3/4 Wide on a 6 BCD N A M E / M A T E R I A 1. Body / Cast Stainless Steel 2. Ball / Stainless Steel 3. Retainer Gasket / Teflon 4. Seat / RTFE 25 2 5. Retainer / Stainless Steel 6. Packing / Teflon. Gland Nut 9/ Stainless Steel 8. Stem / Stainless Steel 9. 1/4 NPT 1/4 Plug NPT / Face Stainless Purge Steel Connection 10. ockout Pin / Stainless Steel 11. Name Plate / Stainless Steel 2 oles Drilled 3/4 Ø on a 6 BCD 3 4 4.6 Ø 5 6 8 3.54 Ø 1 15 /16 1 2 3/64 1 Ø 2 3 /4 Ø 5 3 /4 4 3 /8 45 45 10 1/4 PT Body Purge Connection Shown in Closed Position 2 oles Drilled & Tapped 5/8 UNC on a 6 BCD 11 2 Slots 3/4 Wide on a 6 BCD 25 2 1/4 NPT Face Purge Connection 2 oles Drilled 3/4 Ø on a 6 BCD 9 3 4 4.6 Ø 5 6 8 6 13/16 13/32 INSTAATION INSTRUCTIONS 6 FIG. 1 Stud Bolt Orientation For standard 3 150# Flange mounted level transmitter & FCC isolation valve Notes: 1. FCC s in this configuration will require the two tapped holes to be drilled out. 2. Tank Pad Thickness depends on Vessel Diameter or Wall (shell) Thickness. 1 /2" 6" 3" 1 1 /4" 1 15 /16" 1 1 /2" Transmitter 304 SS Studs 5 1 /2" ong 45 45 45 45 Vertical Axis Vertical Axis 45 45 45 45 1 /2" 1 /2" 6" 6" 3" 3" Tank Flange FIG. 2 Stud Bolt Orientation Serrated Face For replacement of Knife Gate s 304 SS Studs 2 3 /4" long 304 SS Cap Screws 3 1 /2" long Vertical Axis Vertical Axis Notes: Vertical Axis 1. FCC s will fit both Fig. 1 & Fig. 2 (Fig. 1 preferred orientation) 2. 5/8 ø Studs A & Nuts to be supplied by A Contractor installing the equipment. 3. All dimensions 45 are typical. Studs 45 are to be cut to length as required. 4. 1/16 Gaskets to be supplied by Contractor. 5. Weight: 10.5 lbs. 1 /2" 6" 3" Transmitter 304 SS Studs 5 1 /2" ong A A 45 45 A A 45 45 1 /2" 1 /2" 6" 6" 3" 3" 1 1 /4" 1 15 /16" 1 1 /2" SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 2/16/11-50.3
INVESTMENT CAST 316 S.S. SAMPING VAVE FIG. NO. 51B (CF8M) RESIIENT SEAT - EVER OPERATED D e s i g n F e a t u r e s Cast in corrision resistant stainless steel. 2 NPT X 1 1/2 outlet Designed with all wetted parts of 316SS Designed to handle corrosive fluids in the process industries. (CF8M) and a viton resilient seat for positive shut-off. ever operated Designed for installation in pipe lines or tanks where an occasional sample is required. 150 PSI Maximum working pressure. FOW CONTRO
FOW CONTRO INVESTMENT CAST 316 STAINESS STEE SAMPING VAVES Size 2 NPT x 1 1 /2 Outlet Thread Flow Viton Seat W D outlet DIMENSIONS (UNIT: INC/MM) DIMENSIONS Size D TD W Y Weight 2 in 1.5 2 NPT 8.85 5.3125 11.25 9.25 5 BS 51 mm 38 2 NPT 225 135 285 235 2.3 KGS SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 2/16/11-51.3
CAST BODY KNIFE GATE VAVES FIG. 3, STAINESS STEE WIT D.I. TOPWORKS - FU PORT - META TO META SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for 150 psi @ 32-150 F (OC-66C) Full port one piece cast body with integral cast 210 back-up ring and self cleaning seat pocket. Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS 405-8 specifications. D esigned to handle dense mixtures of stock and slurries. The shearing action of the knife gate cuts through solids and cleans the seat as it closes. FOW CONTRO
FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 3, STAINESS STEE - FU PORT - META TO META SEAT FIG 3B - CF8M (316) FIG 3 - CG8M (31) G 21 11 13 10 26 9 20 19 (COSED) 8 12 M 22 18 (OPEN) 14 26 FOR 16 TO 24 TOP WORKS DETAI 1 25 16 15 5 2 6 andwheel actuator standard. 1 AØ BØ CØ 24 (D) BCØ 4 23 3 Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 1/16 K s 30" and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. J (E) NO. OF OES (F) DIAMETER Size DIMENSIONS - INCES A B C D E F G h J K M 2 1.85 3.625 6 4.5 4 0.625-11 8.5 11.85 14 1.85 0.5 0.5 0.3125 31 2.5 2.435 4.125 5.5 4 0.625-11 8.5 12.625 15.25 2 0.5 0.5 0.3125 35 3 2.85 5.5 6 4 0.625-11 10 14.3125 1.3125 2 0.5 0.5 0.3125 38 4 4 6.185 9.5 8 0.625-11 10 16.8125 21 2 0.5 0.5 0.3125 65 6 6 8.5 11 9.5 8 0.5-10 14 20.5625 26.5 2.25 0.625 1.125 0.3125 86 8 8 10.625 13.5 11.5 8 0.5-10 14 24.185 32.35 2.5 0.625 1.125 0.35 140 10 10 12.5 16 14.25 12 0.85-9 18 28.435 38.5 2.5 0.5 1.125 0.468 18 12 12 15 19 1 12 0.85-9 18 32.435 44.5 3 0.5 1.125 0.5625 225 14 13.25 16.25 21 18.5 12 1-8 20 36.125 49.685 3 0.85 1.5 0.5625 24 16 15.25 18.5 23.5 21.25 16 1-8 20 43 58.5 3.5 0.85 1.5 0.5 410 18 1.25 21 25 22.5 16 1.125-24 4 64.5 3.5 0.85 1.5 0.5 435 20 19.25 23 2.5 25 20 1.125-24 51.125 0.85 4.5 1 1.5 0.968 598 24 23.25 2.25 32 32 20 1.25-30 58.85 82.625 4.5 1 1.5 0.968 1 Size DIMENSIONS - MIIMETERS A B C D E F G h J K M 50 48 92 152 121 4 0.625-11 216 302 356 48 13 19 8 14 65 62 105 18 140 4 0.625-11 216 321 38 51 13 19 8 16 80 3 12 191 152 4 0.625-11 254 364 440 51 13 19 8 1 100 102 15 229 191 8 0.625-11 254 42 533 51 13 19 8 30 150 152 216 29 241 8 0.5-10 356 522 69 5 16 29 8 39 200 203 20 343 298 8 0.5-10 356 614 822 0 16 29 10 64 250 254 324 406 362 12 0.85-9 45 22 984 0 19 29 12 85 300 305 381 483 432 12 0.85-9 45 824 113 6 19 29 14 102 350 33 413 533 46 12 1-8 508 918 1262 6 22 38 14 125 400 38 40 59 540 16 1-8 508 1092 1492 89 22 38 19 186 450 438 533 635 58 16 1.125-610 1194 1645 89 22 38 19 198 500 489 584 699 635 20 1.125-610 1299 1800 114 25 38 25 22 600 591 692 813 49 20 1.25-62 1495 2099 114 25 38 25 350 Weight lbs Weight Kg Item Description 3B 3 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts Cadmium Plated Steel 5 Gland 6 Gland Nuts Cadmium Plated Steel Nylock Sleeve ousing Bolts Cadmium Plated Steel 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing A536 Gr.65-45-12 10 andwheel A536 Gr.60-42-10 11 andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr.304 13 Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts Cadmium Plated Steel Nylock 16 Clevis Bolts Cadmium Plated Steel 1 Clevis Gr.CF8 18 Yoke A536 Gr.65-45-12 19 Nameplate ASTM A240 Gr.304 20 andwheel Key Mild Steel 21 Thrust Bearing SKF 5112 (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring ycar 0 24 Yoke Bolts Cadmium Plated Steel 25 Yoke Nuts Cadmium Plated Steel Nylock 26 ousing Nuts Cadmium Plated Steel Nylock SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 2/16/11-3.8
CAST BODY KNIFE GATE VAVES FIG. 3, STAINESS STEE WIT D.I. TOPWORKS - FU PORT - UNI-DIRECTIONA META TO META SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for 150 psi @ 32-150 F (OC-66C) Full port one piece cast body with integral cast 210 back-up ring and self cleaning seat pocket. Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS 405-8 specifications. D esigned to handle dense mixtures of stock and slurries. The shearing action of the knife gate cuts through solids and cleans the seat as it closes. FOW CONTRO
FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 3, STAINESS STEE FU PORT UNI-DIRECTIONA META TO META SEAT FIG 3B - CF8M (316) FIG 3 - CG8M (31) G 21 11 13 10 26 9 20 19 (COSED) 8 12 M 22 18 (OPEN) 14 26 FOR 16 TO 24 TOP WORKS DETAI 1 25 16 15 5 2 6 andwheel actuator standard. 1 AØ BØ CØ 24 (D) BCØ 4 23 3 Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 1/16 K s 30" and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. J (E) NO. OF OES (F) DIAMETER Size DIMENSIONS - INCES A B C D E F G h J K M 2 1.85 3.625 6 4.5 4 0.625-11 8.5 11.85 14 1.85 0.5 0.5 0.3125 31 2.5 2.435 4.125 5.5 4 0.625-11 8.5 12.625 15.25 2 0.5 0.5 0.3125 35 3 2.85 5.5 6 4 0.625-11 10 14.3125 1.3125 2 0.5 0.5 0.3125 38 4 4 6.185 9.5 8 0.625-11 10 16.8125 21 2 0.5 0.5 0.3125 65 6 6 8.5 11 9.5 8 0.5-10 14 20.5625 26.5 2.25 0.625 1.125 0.3125 86 8 8 10.625 13.5 11.5 8 0.5-10 14 24.185 32.35 2.5 0.625 1.125 0.35 140 10 10 12.5 16 14.25 12 0.85-9 18 28.435 38.5 2.5 0.5 1.125 0.468 18 12 12 15 19 1 12 0.85-9 18 32.435 44.5 3 0.5 1.125 0.5625 225 14 13.25 16.25 21 18.5 12 1-8 20 36.125 49.685 3 0.85 1.5 0.5625 24 16 15.25 18.5 23.5 21.25 16 1-8 20 43 58.5 3.5 0.85 1.5 0.5 410 18 1.25 21 25 22.5 16 1.125-24 4 64.5 3.5 0.85 1.5 0.5 435 20 19.25 23 2.5 25 20 1.125-24 51.125 0.85 4.5 1 1.5 0.968 598 24 23.25 2.25 32 32 20 1.25-30 58.85 82.625 4.5 1 1.5 0.968 1 Size DIMENSIONS - MIIMETERS A B C D E F G h J K M 50 48 92 152 121 4 0.625-11 216 302 356 48 13 19 8 14 65 62 105 18 140 4 0.625-11 216 321 38 51 13 19 8 16 80 3 12 191 152 4 0.625-11 254 364 440 51 13 19 8 1 100 102 15 229 191 8 0.625-11 254 42 533 51 13 19 8 30 150 152 216 29 241 8 0.5-10 356 522 69 5 16 29 8 39 200 203 20 343 298 8 0.5-10 356 614 822 0 16 29 10 64 250 254 324 406 362 12 0.85-9 45 22 984 0 19 29 12 85 300 305 381 483 432 12 0.85-9 45 824 113 6 19 29 14 102 350 33 413 533 46 12 1-8 508 918 1262 6 22 38 14 125 400 38 40 59 540 16 1-8 508 1092 1492 89 22 38 19 186 450 438 533 635 58 16 1.125-610 1194 1645 89 22 38 19 198 500 489 584 699 635 20 1.125-610 1299 1800 114 25 38 25 22 600 591 692 813 49 20 1.25-62 1495 2099 114 25 38 25 350 Weight lbs Weight Kg Item Description 3B 3 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts Cadmium Plated Steel 5 Gland 6 Gland Nuts Cadmium Plated Steel Nylock Sleeve ousing Bolts Cadmium Plated Steel 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing A536 Gr.65-45-12 10 andwheel A536 Gr.60-42-10 11 andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr.304 13 Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts Cadmium Plated Steel Nylock 16 Clevis Bolts Cadmium Plated Steel 1 Clevis Gr.CF8 18 Yoke A536 Gr.65-45-12 19 Nameplate ASTM A240 Gr.304 20 andwheel Key Mild Steel 21 Thrust Bearing SKF 5112 (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring ycar 0 24 Yoke Bolts Cadmium Plated Steel 25 Yoke Nuts Cadmium Plated Steel Nylock 26 ousing Nuts Cadmium Plated Steel Nylock SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 10/24/11-3.9
CAST BODY KNIFE GATE VAVES FIG. 4, STAINESS STEE WIT D.I. TOPWORKS - FU PORT - RESIIENT SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for 150 psi @ 32-150 F (OC-66C) Full port one piece cast body with integral resilient seat. Drip tight shut-off in both directions (Bi-directional) Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt-on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS 405-8 specifications. D esigned for shut-off on light consistency stock, white water or clear liquids. FOW CONTRO
FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 4, STAINESS STEE - FU PORT - RESIIENT SEAT G FIG 4B - CF8M (316) FIG 4 - CG8M (31) 30 13 29 11 20 8 12 9 19 22 10 26 21 (COSED) 15 5 M 18 26 25 14 1 2 (OPEN) FOR 16 16 TO 24 TOP WORKS 24 DETAI TOP WORKS DETAI 16 6 Optional seat: YCAR (BUNA N or NITRIE) 23 3 1 ØA ØB (RF) ØC 24 4 2 andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 28 1/16 J K D(BCD) (E) NO. OF OES (F) DIAMETER s 30 and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Size DIMENSIONS - INCES A B C D E F G h J K M 2 2 3.625 6 4.5 4 0.625-11 8.5 12.5 15 1.85 0.5 0.5 0.3125 31 2.5 2.44 4.125 5.5 4 0.625-11 8.5 13.5 16.35 2 0.5 0.5 0.3125 35 3 2.85 5.5 6 4 0.625-11 10 16.685 19.685 2 0.5 0.5 0.3125 38 4 3.85 6.185 9.5 8 0.625-11 10 19.185 23.35 2 0.5 0.5 0.3125 65 6 5.85 8.5 11 9.5 8 0.5-10 14 22.935 29.125 2.25 0.5625 1.125 0.3125 86 8.85 10.625 13.5 11.5 8 0.5-10 14 26.5625 34.5 2.5 0.625 1.125 0.35 140 10 9.85 12.5 16 14.25 12 0.85-9 18 30.8125 41.125 2.5 0.5 1.125 0.468 18 12 11.85 15 19 1 12 0.85-9 18 36.0625 4.125 3 0.5 1.125 0.5625 225 14 13.125 16.25 21 18.5 12 1-8 20 38.5 52.5 3 0.85 1.5 0.5625 24 16 15.5 18.5 23.5 21.25 16 1-8 20 45.5 59.5 3.5 1 1.5 0.5 410 18 1.5 21 25 22.5 16 1.125-24 49.5 6.35 3.5 1 1.5 0.5 435 20 19.5 23 2.5 25 20 1.125-24 5.625.125 4.5 1 1.5 0.968 598 24 23.5 2.25 32 29.5 20 1.25-30 63.25 98.25 4.5 1 1.5 0.968 1 Size DIMENSIONS - MIIMETERS A B C D E F G h J K M 50 51 92 152 121 4 0.625-11 216 324 381 48 13 19 8 14 65 62 105 18 140 4 0.625-11 216 349 416 51 13 19 8 16 80 3 12 191 152 4 0.625-11 254 424 500 51 13 19 8 1 100 98 15 229 191 8 0.625-11 254 48 594 51 13 19 8 30 150 149 216 29 241 8 0.5-10 356 583 40 5 14 29 8 39 200 200 20 343 298 8 0.5-10 356 65 883 0 16 29 10 64 250 251 324 406 362 12 0.85-9 45 83 1045 0 19 29 12 85 300 302 381 483 432 12 0.85-9 45 916 119 6 19 29 14 102 350 333 413 533 46 12 1-8 508 98 1322 6 22 38 14 125 400 394 40 59 540 16 1-8 508 1156 1518 89 25 38 19 186 450 445 533 635 58 16 1.125-610 125 111 89 25 38 19 198 500 495 584 699 635 20 1.125-610 1464 1960 114 25 38 25 22 600 59 692 813 49 20 1.25-62 160 2496 114 25 38 25 350 Weight lbs Weight Kg Item Description 4B 4 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts Cadmium Plated Steel 5 Gland 6 Gland Nuts Cadmium Plated Steel Nylock Sleeve ousing Bolts Cadmium Plated Steel 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing ASTM A536 Gr.65-45-12 10 andwheel ASTM A536 Gr.60-42-10 11 andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr.SS304 13 Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts Cadmium Plated Steel Nylock 16 Clevis Bolts Cadmium Plated Steel 1 Clevis Gr.CF8 18 Yoke ASTM A536 Gr.65-42-12 19 Nameplate ASTM A49 Gr.304 20 andwheel Key Mild Steel 21 Thrust Bearing SKF 51112 (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring Viton 0 24 Yoke Bolts Cadmium Plated Steel 25 Yoke Nuts Cadmium Plated Steel Nylock 26 ousing Nuts Cadmium Plated Steel Nylock 2 Resilient Seat Viton 0 28 Reinforcing Wire ASTM A49 Gr.SS316 29 Adjusting Nut ISO 3506 Gr.A2-0 30 ock Nut Cadmium Plated Steel SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 2/16/11-4.
CAST BODY KNIFE GATE VAVES FIG. 4, STAINESS STEE WIT D.I. TOPWORKS - FU PORT - BI-DIRECTIONA RESIIENT SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for 150 psi @ 32-150 F (OC-66C) Full port one piece cast body with integral resilient seat. Drip tight shut-off in both directions (Bi-directional) Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt-on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS 405-8 specifications. D esigned for shut-off on light consistency stock, white water or clear liquids. FOW CONTRO
FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 4, STAINESS STEE - FU PORT - BI-DIRECTIONA RESIIENT SEAT G FIG 4B - CF8M (316) FIG 4 - CG8M (31) 30 13 29 11 20 8 12 9 19 22 10 26 21 (COSED) 15 5 M 18 26 25 14 1 2 (OPEN) FOR 16 16 TO 24 TOP WORKS 24 DETAI TOP WORKS DETAI 16 6 Optional seat: YCAR (BUNA N or NITRIE) 23 3 1 ØA ØB (RF) ØC 24 4 2 andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 28 1/16 J K D(BCD) (E) NO. OF OES (F) DIAMETER s 30 and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Size DIMENSIONS - INCES A B C D E F G h J K M 2 2 3.625 6 4.5 4 0.625-11 8.5 12.5 15 1.85 0.5 0.5 0.3125 31 2.5 2.44 4.125 5.5 4 0.625-11 8.5 13.5 16.35 2 0.5 0.5 0.3125 35 3 2.85 5.5 6 4 0.625-11 10 16.685 19.685 2 0.5 0.5 0.3125 38 4 3.85 6.185 9.5 8 0.625-11 10 19.185 23.35 2 0.5 0.5 0.3125 65 6 5.85 8.5 11 9.5 8 0.5-10 14 22.935 29.125 2.25 0.5625 1.125 0.3125 86 8.85 10.625 13.5 11.5 8 0.5-10 14 26.5625 34.5 2.5 0.625 1.125 0.35 140 10 9.85 12.5 16 14.25 12 0.85-9 18 30.8125 41.125 2.5 0.5 1.125 0.468 18 12 11.85 15 19 1 12 0.85-9 18 36.0625 4.125 3 0.5 1.125 0.5625 225 14 13.125 16.25 21 18.5 12 1-8 20 38.5 52.5 3 0.85 1.5 0.5625 24 16 15.5 18.5 23.5 21.25 16 1-8 20 45.5 59.5 3.5 1 1.5 0.5 410 18 1.5 21 25 22.5 16 1.125-24 49.5 6.35 3.5 1 1.5 0.5 435 20 19.5 23 2.5 25 20 1.125-24 5.625.125 4.5 1 1.5 0.968 598 24 23.5 2.25 32 29.5 20 1.25-30 63.25 98.25 4.5 1 1.5 0.968 1 Size DIMENSIONS - MIIMETERS A B C D E F G h J K M 50 51 92 152 121 4 0.625-11 216 324 381 48 13 19 8 14 65 62 105 18 140 4 0.625-11 216 349 416 51 13 19 8 16 80 3 12 191 152 4 0.625-11 254 424 500 51 13 19 8 1 100 98 15 229 191 8 0.625-11 254 48 594 51 13 19 8 30 150 149 216 29 241 8 0.5-10 356 583 40 5 14 29 8 39 200 200 20 343 298 8 0.5-10 356 65 883 0 16 29 10 64 250 251 324 406 362 12 0.85-9 45 83 1045 0 19 29 12 85 300 302 381 483 432 12 0.85-9 45 916 119 6 19 29 14 102 350 333 413 533 46 12 1-8 508 98 1322 6 22 38 14 125 400 394 40 59 540 16 1-8 508 1156 1518 89 25 38 19 186 450 445 533 635 58 16 1.125-610 125 111 89 25 38 19 198 500 495 584 699 635 20 1.125-610 1464 1960 114 25 38 25 22 600 59 692 813 49 20 1.25-62 160 2496 114 25 38 25 350 Weight lbs Weight Kg Item Description 4B 4 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts Cadmium Plated Steel 5 Gland 6 Gland Nuts Cadmium Plated Steel Nylock Sleeve ousing Bolts Cadmium Plated Steel 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing ASTM A536 Gr.65-45-12 10 andwheel ASTM A536 Gr.60-42-10 11 andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr.SS304 13 Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts Cadmium Plated Steel Nylock 16 Clevis Bolts Cadmium Plated Steel 1 Clevis Gr.CF8 18 Yoke ASTM A536 Gr.65-42-12 19 Nameplate ASTM A49 Gr.304 20 andwheel Key Mild Steel 21 Thrust Bearing SKF 51112 (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring Viton 0 24 Yoke Bolts Cadmium Plated Steel 25 Yoke Nuts Cadmium Plated Steel Nylock 26 ousing Nuts Cadmium Plated Steel Nylock 2 Resilient Seat Viton 0 28 Reinforcing Wire ASTM A49 Gr.SS316 29 Adjusting Nut ISO 3506 Gr.A2-0 30 ock Nut Cadmium Plated Steel SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 10/24/11-4.8
CAST BODY KNIFE GATE VAVES FIG. 83, A STAINESS STEE - FU PORT - META TO META SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for 150 psi @ 32-150 F (OC-66C) Full port one piece cast body with integral cast 210 back-up ring and self cleaning seat pocket. Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS 405-8 specifications. D esigned to handle dense mixtures of stock and slurries. The shearing action of the knife gate cuts through solids and cleans the seat as it closes. FOW CONTRO
FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 83, STAINESS STEE - FU PORT - META TO META SEAT FIG 83B - CF8M (316) FIG 83 - CG8M (31) 11 13 G 21 10 26 (COSED) 20 8 12 16 M 9 19 22 18 (OPEN) 26 25 24 14 1 2 FOR 16 TO 24 TOP WORKS DETAI 15 5 (D) BCØ 6 andwheel actuator standard. AØ BØ CØ 1 4 23 3 Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 1/16 J K (E) NO. OF OES (F) DIAMETER s 30 and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Size DIMENSIONS - INCES A B C D E F G h J K M 2 1.85 3.625 6 4.5 4 0.625-11 8.5 11.85 14 1.85 0.5 0.5 0.3125 31 2.5 2.5 4.125 5.5 4 0.625-11 8.5 12.625 15.25 2 0.5 0.5 0.3125 35 3 2.85 5.5 6 4 0.625-11 10 14.3125 1.3125 2 0.5 0.5 0.3125 38 4 4 6.185 9.5 8 0.625-11 10 16.8125 21 2 0.5 0.5 0.3125 65 6 6 8.5 11 9.5 8 0.5-10 14 20.5625 26.5 2.25 0.125 1.125 0.3125 86 8 8 10.625 13.5 11.5 8 0.5-10 14 24.185 32.35 2.5 0.125 1.125 0.35 140 10 10 12.5 16 14.25 12 0.85-9 18 28.435 38.5 2.5 0.5 1.125 0.468 18 12 12 15 19 1 12 0.85-9 18 32.435 44.5 3 0.5 1.125 0.5625 225 14 13.25 16.25 21 18.5 12 1-8 20 36.125 49.685 3 0.8125 1.5 0.5625 24 16 15.25 18.5 23.5 21.25 16 1-8 20 43 58.5 3.5 0.85 1.5 0.5 410 18 1.25 21 25 22.5 16 1.125-24 4 64.5 3.5 0.85 1.5 0.5 435 20 19.25 23 2.5 25 20 1.125-24 51.125 0.85 4.5 1 1.5 0.968 598 24 23.25 2.25 32 32 20 1.25-30 58.85 82.625 4.5 1 1.5 0.968 1 Size DIMENSIONS - MIIMETERS A B C D E F G h J K M 50 48 92 152 121 4 0.625-11 216 302 356 48 13 19 8 14 65 62 105 18 140 4 0.625-11 216 321 38 51 13 19 8 16 80 3 12 191 152 4 0.625-11 254 364 440 51 13 19 8 1 100 102 15 229 191 8 0.625-11 254 42 533 51 13 19 8 30 150 152 216 29 241 8 0.5-10 356 522 69 5 16 29 8 39 200 203 20 343 298 8 0.5-10 356 614 822 0 16 29 10 64 250 254 324 406 362 12 0.85-9 45 22 984 0 19 29 12 85 300 305 381 483 432 12 0.85-9 45 824 113 6 19 29 15 102 350 33 413 533 46 12 1-8 508 918 1262 6 21 38 15 125 400 38 40 59 540 16 1-8 508 1092 1492 89 22 38 20 186 450 438 533 635 58 16 1.125-610 1194 1645 89 22 38 20 198 500 489 584 699 635 20 1.125-610 1299 1800 114 25 38 25 22 600 591 692 813 49 20 1.25-62 1495 2099 114 25 38 25 350 Weight lbs Weight Kg Item Description 83B 83 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts ISO 3506 Gr.A2-0 5 Gland 6 Gland Nuts ISO 3506 Gr.A2-0 Nylock Sleeve ousing Bolts ISO 3506 Gr.A2-0 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing Gr.CF8 10 andwheel ASTM A536 Gr.60-42-10 11 andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr.304 13 Nut ocking Screw SS Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts ISO 3506 Gr.A2-0 Nylock 16 Clevis Bolts ISO 3506 Gr.A2-0 1 Clevis Gr.CF8 18 Yoke Gr.CF8 19 Nameplate Gr.304 20 andwheel Key Mild Steel 21 Thrust Bearing SKF 51112 (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring ycar 0 24 Yoke Bolts ISO 3506 Gr.A2-0 25 Yoke Nuts ISO 3506 Gr.A2-0 Nylock 26 ousing Nuts ISO 3506 Gr.A2-0 Nylock SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 2/16/11-83.6
CAST BODY KNIFE GATE VAVES FIG. 84, STAINESS STEE - FU PORT - RESIIENT SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for 150 psi @ 32-150 F (OC-66C) Full port one piece cast body with integral resilient seat. Drip tight shut-off in both directions (Bi-directional). Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt-on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS 405-8 specifications. D esigned for shut-off on light consistency stock, white water or clear liquids. FOW CONTRO
FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 84, STAINESS STEE - FU PORT - RESIIENT SEAT G FIG 84B - CF8M (316) FIG 84 - CG8M (31) 30 29 21 11 13 (COSED) 20 8 12 M 9 19 22 10 26 25 14 (OPEN) 26 FOR 16 TO 24 TOP WORKS DETAI FOR 16 TO 24 TOP WORKS DETAI 15 18 5 23 3 1 16 ØA ØB (RF) ØC 24 1 2 6 4 2 Optional seat: YCAR (BUNA N or NITRIE) andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 28 1/16 J K D(BCD) (E) NO. OF OES (F) DIAMETER s 30 and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Size DIMENSIONS - INCES A B C D E F G h J K M 2 2 3.625 6 4.5 4 0.625-11 8.5 12.5 15 1.85 0.5 0.5 0.3125 31 2.5 2.44 4.125 5.5 4 0.625-11 8.5 13.5 16.35 2 0.5 0.5 0.3125 35 3 2.85 5.5 6 4 0.625-11 10 16.685 19.685 2 0.5 0.5 0.3125 38 4 3.85 6.185 9.5 8 0.625-11 10 19.185 23.35 2 0.5 0.5 0.3125 65 6 5.85 8.5 11 9.5 8 0.5-10 14 22.935 29.125 2.25 0.625 1.125 0.3125 86 8.85 10.625 13.5 11.5 8 0.5-10 14 26.5625 34.5 2.5 0.625 1.125 0.35 140 10 9.85 12.5 16 14.25 12 0.85-9 18 30.8125 41.125 2.5 0.5 1.125 0.468 18 12 11.85 15 19 1 12 0.85-9 18 36.0625 4.125 3 0.5 1.125 0.5625 225 14 13.125 16.25 21 18.5 12 1-8 20 38.5 52.0625 3 0.85 1.5 0.5625 24 16 15.5 18.5 23.5 21.25 16 1-8 20 45.5 59.5 3.5 1 1.5 0.5 410 18 1.5 21 25 22.5 16 1.125-24 49.5 6.35 3.5 1 1.5 0.5 435 20 19.5 23 2.5 25 20 1.125-24 5.625.125 4.5 1 1.5 0.968 598 24 23.5 2.25 32 29.5 20 1.25-30 63.25 98.25 4.5 1 1.5 0.968 1 Size DIMENSIONS - MIIMETERS A B C D E F G h J K M 50 51 92 152 121 4 0.625-11 216 324 381 48 13 19 8 14 65 62 105 18 140 4 0.625-11 216 349 416 51 13 19 8 16 80 3 12 191 152 4 0.625-11 254 424 500 51 13 19 8 1 100 98 15 229 191 8 0.625-11 254 48 594 51 13 19 8 30 150 149 216 29 241 8 0.5-10 356 583 40 5 16 29 8 39 200 200 20 343 298 8 0.5-10 356 65 883 0 16 29 10 64 250 251 324 406 362 12 0.85-9 45 83 1045 0 19 29 12 85 300 302 381 483 432 12 0.85-9 45 916 119 6 19 29 14 102 350 333 413 533 46 12 1-8 508 98 1322 6 22 38 14 125 400 394 40 59 540 16 1-8 508 1156 1518 89 25 38 19 186 450 445 533 635 58 16 1.125-610 125 111 89 25 38 19 198 500 495 584 699 635 20 1.125-610 1464 1960 114 25 38 25 22 600 59 692 813 49 20 1.25-62 160 2496 114 25 38 25 350 Weight lbs Weight Kg Item Description 84B 84 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts ISO 3506 Gr.A2-0 5 Gland 6 Gland Nuts ISO 3506 Gr.A2-0 Nylock Sleeve ousing Bolts ISO 3506 Gr.A2-0 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing Gr.CF8 10 andwheel ASTM A536 Gr.60-42-10 11 andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr.304 13 Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts ISO 3506 Gr.A2-0 Nylock 16 Clevis Bolts ISO 3506 Gr.A2-0 1 Clevis Gr.CF8 18 Yoke Gr.CF8 19 Nameplate ASTM A240 Gr.304 20 andwheel Key Mild Steel 21 Thrust Bearing SKF 51112 (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring Viton 0 24 Yoke Bolts ISO 3506 Gr.A2-0 25 Yoke Nuts ISO 3506 Gr.A2-0 Nylock 26 ousing Nuts ISO 3506 Gr.A2-0 Nylock 2 Resilient Seat Viton 0 28 Reinforce Wire (ss rod) ASTM A49 Gr.316 29 Adjusting Nut ISO 3506 Gr.A2-0 30 ock Nut AISI 304 Nylock SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 2/16/11-84.
CAST BODY KNIFE GATE VAVES FIG. 84, STAINESS STEE - FU PORT - BI-DIRECTIONA RESIIENT SEAT D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. eavy gate with wide spaced clevis. Wiper ring in stuffing box assists sealing during both operating and static conditions. rated for 150 psi @ 32-150 F (OC-66C) Full port one piece cast body with integral resilient seat. Drip tight shut-off in both directions (Bi-directional). Full lug pattern. Drilled and tapped to class 150 flanges. Easy bolt-on conversion to actuator or bevel gear operator. Designed and tested to conform to MSS-SP81 and TAPPI TIS 405-8 specifications. D esigned for shut-off on light consistency stock, white water or clear liquids. FOW CONTRO
FOW CONTRO STAINESS STEE KNIFE GATE VAVES FIG. 84, STAINESS STEE - FU PORT - BI-DIRECTIONA RESIIENT SEAT G FIG 84B - CF8M (316) FIG 84 - CG8M (31) 30 29 21 11 13 (COSED) 20 8 12 M 9 19 22 10 26 25 14 (OPEN) 26 FOR 16 TO 24 TOP WORKS DETAI FOR 16 TO 24 TOP WORKS DETAI 15 18 5 23 3 1 16 ØA ØB (RF) ØC 24 1 2 6 4 2 Optional seat: YCAR (BUNA N or NITRIE) andwheel actuator standard. Chainwheel, bevel gear, electric, hydraulic or pneumatic actuators are available. 28 1/16 J K D(BCD) (E) NO. OF OES (F) DIAMETER s 30 and larger, or in special alloys like CNm (Alloy 20), Duplex SS, astelloy are available on request. Size DIMENSIONS - INCES A B C D E F G h J K M 2 2 3.625 6 4.5 4 0.625-11 8.5 12.5 15 1.85 0.5 0.5 0.3125 31 2.5 2.44 4.125 5.5 4 0.625-11 8.5 13.5 16.35 2 0.5 0.5 0.3125 35 3 2.85 5.5 6 4 0.625-11 10 16.685 19.685 2 0.5 0.5 0.3125 38 4 3.85 6.185 9.5 8 0.625-11 10 19.185 23.35 2 0.5 0.5 0.3125 65 6 5.85 8.5 11 9.5 8 0.5-10 14 22.935 29.125 2.25 0.625 1.125 0.3125 86 8.85 10.625 13.5 11.5 8 0.5-10 14 26.5625 34.5 2.5 0.625 1.125 0.35 140 10 9.85 12.5 16 14.25 12 0.85-9 18 30.8125 41.125 2.5 0.5 1.125 0.468 18 12 11.85 15 19 1 12 0.85-9 18 36.0625 4.125 3 0.5 1.125 0.5625 225 14 13.125 16.25 21 18.5 12 1-8 20 38.5 52.0625 3 0.85 1.5 0.5625 24 16 15.5 18.5 23.5 21.25 16 1-8 20 45.5 59.5 3.5 1 1.5 0.5 410 18 1.5 21 25 22.5 16 1.125-24 49.5 6.35 3.5 1 1.5 0.5 435 20 19.5 23 2.5 25 20 1.125-24 5.625.125 4.5 1 1.5 0.968 598 24 23.5 2.25 32 29.5 20 1.25-30 63.25 98.25 4.5 1 1.5 0.968 1 Size DIMENSIONS - MIIMETERS A B C D E F G h J K M 50 51 92 152 121 4 0.625-11 216 324 381 48 13 19 8 14 65 62 105 18 140 4 0.625-11 216 349 416 51 13 19 8 16 80 3 12 191 152 4 0.625-11 254 424 500 51 13 19 8 1 100 98 15 229 191 8 0.625-11 254 48 594 51 13 19 8 30 150 149 216 29 241 8 0.5-10 356 583 40 5 16 29 8 39 200 200 20 343 298 8 0.5-10 356 65 883 0 16 29 10 64 250 251 324 406 362 12 0.85-9 45 83 1045 0 19 29 12 85 300 302 381 483 432 12 0.85-9 45 916 119 6 19 29 14 102 350 333 413 533 46 12 1-8 508 98 1322 6 22 38 14 125 400 394 40 59 540 16 1-8 508 1156 1518 89 25 38 19 186 450 445 533 635 58 16 1.125-610 125 111 89 25 38 19 198 500 495 584 699 635 20 1.125-610 1464 1960 114 25 38 25 22 600 59 692 813 49 20 1.25-62 160 2496 114 25 38 25 350 Weight lbs Weight Kg Item Description 84B 84 1 Body 2 Gate ASTM A240 Gr.316 ASTM A240 Gr.31 3 Packing 134 AF PAMETTO 4 Gland Bolts ISO 3506 Gr.A2-0 5 Gland 6 Gland Nuts ISO 3506 Gr.A2-0 Nylock Sleeve ousing Bolts ISO 3506 Gr.A2-0 8 Stem Sleeve SAE 660 (Bronze) 9 Sleeve ousing Gr.CF8 10 andwheel ASTM A536 Gr.60-42-10 11 andwheel Nut Cadmium Plated Steel 12 Stem ASTM A49 Gr.304 13 Nut ocking Screw SS-Commercial Grade (BSW) 14 Grease Nipple Cadmium Plated Steel 15 Clevis Nuts ISO 3506 Gr.A2-0 Nylock 16 Clevis Bolts ISO 3506 Gr.A2-0 1 Clevis Gr.CF8 18 Yoke Gr.CF8 19 Nameplate ASTM A240 Gr.304 20 andwheel Key Mild Steel 21 Thrust Bearing SKF 51112 (Ball Bearing) 22 Rivets Aluminium 23 Wiper Ring Viton 0 24 Yoke Bolts ISO 3506 Gr.A2-0 25 Yoke Nuts ISO 3506 Gr.A2-0 Nylock 26 ousing Nuts ISO 3506 Gr.A2-0 Nylock 2 Resilient Seat Viton 0 28 Reinforce Wire (ss rod) ASTM A49 Gr.316 29 Adjusting Nut ISO 3506 Gr.A2-0 30 ock Nut AISI 304 Nylock SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 24/10/11-84.8
CAST 316 STAINESS STEE VAVES FIG. 90B-200 SWING CECK VAVE (CF8M) FIG. 91B-200 WEDGE GATE VAVE (CF8M) FIG. 92B-200 GOBE VAVE (CF8M) D e s i g n F e a t u r e s 200 WOG/120 WSP @ 350 F Rated Investment Cast Compact Design An economical choice to handle a variety of corrosive fluids. FOW CONTRO
FOW CONTRO CAST 316 STAINESS STEE VAVES PRESSURE TEMPERATURE RATING 200 WOG/120 WSP @ 350 F FIG. 90B 200 N.P.T. or FIG. 90BSW Socket Weld P P A R T S / M A T E R I A 1. Cap / CF8M 2. Gasket / PTFE 3. inge Pin / 316 4. Plug / 316 5. Disc / CF8M 6. Body / CF8M DIMENSIONS 1 /2 3 /4 1 1 1 /4 1 1 /2 2 2 1 /2 3 15 20 25 32 40 50 65 5 2.60 3.18 3.58 4.19 4.5 5.50.06.89 66 81 91 106.5 121 141 160 190 1.81 2.13 2.36 2.6 2.95 3.23 3.58 3.94 46 54 60 0 5 82 91 100 P 0.59 0.9 0.98 1.22 1.46 1.89 2.48 2.95 15 20 25 31 3 48 63 5 lbs/kg 0.66 1.06 1.65 2.53 3.40 5.60 8.38 13.01 0.30 0.48 0.5 1.15 1.54 2.54 3.80 5.90 W FIG. 91B 200 N.P.T. Only (Non-Rising Stem) P (open) P A R T S / M A T E R I A 1. Name Plate / Aluminum 2. andwheel / FCD 3. Stem / 316 4. Packing Nut / CF8 5. Gland / CF8M 6. Gland Packing / PTFE. Packing Box / 316 8. Stem Washer / 316 9. Bonnet / CF8M 10. Snap Ring / 316 11. Body / CF8M 12. Disc / CF8M W P lbs/kg DIMENSIONS 1 /2 3 /4 1 1 1 /4 1 1 /2 2 15 20 25 32 40 50 2.24 2.38 2.64 2.99 3.43 3.0 5 60.5 6 6 8 94 3.98 4.25 4.65 5.08 6.81.40 101 108 118 129 13 186 2.44 2.44 2.8 2.8 3.4 4.61 62 62 3 3 95 11 0.63 0.80 0.98 1.25 1.48 1.90 16.1 20.3 25.0 31.8 3.5 48.3 1.15 1.39 1.9 2.60 4.41 6.22 0.52 0.63 0.81 1.18 2.00 2.82 W FIG. 92B 200 N.P.T. Only (Rising Stem) P N A M E / M A T E R I A 1. Name Plate / Aluminum 2. andwheel / FCD 3. Stem / 316 4. Packing Nut / CF8M 5. Gland / CF8M 6. Gland Packing / PTFE. Packing Box / 316 8. Stem Washer / 316 9. Body / CF8M 10. Bonnet / CF8M 11. Disc / 316 12. Snap Ring / 316 open close W P DIMENSIONS 1 /2 3 /4 1 1 1 /4 1 1 /2 2 15 20 25 32 40 50 2.60 2.0 3.08 3.39 3.86 4.35 66 68.5 8.3 86 98 110.5 4.02 3.98 4.09 4.2 5.59 6.18 102 101 104 120 142 15 3.8 3.66 3.4 4.41 4.88 5.43 96 93 95 112 124 138 2.44 2.44 2.8 3.4 3.4 4.61 62 62 3 95 95 11 0.59 0.63 0.5 0.94 1.26 1.50 15 16 19 24 32 38 lbs/kg 0.88 0.99 1.3 2.31 3.09 4.63 0.40 0.45 0.62 1.05 1.40 2.10 SURREY, BC P: 604.594.8431 F: 604.594.4335 surrey@mastewart.com EDMONTON, AB P: 80.436.9051 F: 80.435.0463 edmonton@mastewart.com AJAX, ON P: 905.683.303 F: 905.683.9108 ajax@mastewart.com MONTREA, QC P: 514.421.6311 F: 514.421.6323 montreal@mastewart.com 2/16/11-90.2
CAST BODY KNIFE GATE VAVES ACTUATORS & ACCESSORIES TO SUIT A MODES OF FCC KNIFE GATE VAVES D e s i g n F e a t u r e s can be supplied with Actuator mounted at factory. Four-hole flange on top of yoke allows for easy bolt-on conversion in the field. Actuators include pneumatic, hydraulic, electric or bevel gear operators. Accessories can be mounted, including Solenoid s, imit Switches, Positioners and Speed Controls. Optional positive lock-out mechanism is available to lock gate in open or closed positions. Designed and tested to conform to MSS-SP81 and TAPPI TIS 405-8 specifications. Actuated knife gate valve assemblies. Metal seated and resilient seated models designed to suit most service conditions. FOW CONTRO
STAINESS STEE KNIFE GATE VAVES DIMENSIONS FOR FCC KNIFE GATE VAVES WIT PNEUMATIC AIR CYINDER ACTUATORS FCC s Series 3, 83 - Metal Seat & Series 4, 84 - Resilient Seat Dimensions - Inches Cyl. Stroke Cylinder Weight (lb) Size Bore RDC Model A B C NPT D E ( & Cyl.) A PNEUMATIC ACTUATOR PNEUMATIC ACTUATOR E KK A C D B 2 3.25 2.125 PAGE1NE9-0213 3 3/4 16 1/4 4 1 /8 42 2 4 2.125 PAE1NE9-0213 4 1/2 16 1/4 4 1 /8 45 2.5 4 2.625 PAE1NE9-0263 4 1/2 1 1/8 1/4 4 1/4 2 49 3 3.25 3.125 PAGE1NE9-0313 3 3/4 18 3/8 1/4 4 1/2 2 49 3 4 3.125 PAE1NE9-0313 4 1/2 18 3/8 1/4 4 1/2 2 53 4 3.25 4.125 PAGE1NE9-0413 3 3/4 21 1/4 1/4 5 5/8 2 4 4 4.125 PAE1NE9-0413 4 1/2 21 1/4 1/4 5 5/8 2 80 4 5 4.125 PAKE1NE9-0413 5 1/2 21 3/8 1/4 5 5/8 2 89 6 3.25 6.125 PAGE1NE9-0613 3 3/4 2 3/8 1/4 1/4 2 1/4 100 6 4 6.125 PAE1NE9-0613 4 1/2 2 3/8 1/4 1/4 2 1/4 103 6 5 6.125 PAKE1NE9-0613 5 1/2 2 1/2 1/4 1/4 2 1/4 112 6 6 6.125 PAE1NE9-0613 6 1/2 2 1/2 1/4 1/4 2 1/4 119 8 3.25 8.125 PAGE1NE9-0813 3 3/4 33 1/4 8 /8 2 3/4 155 8 4 8.125 PAE1NE9-0813 4 1/2 33 1/4 8 /8 2 3/4 159 8 5 8.125 PAKE1NE9-0813 5 1/2 33 1/8 1/4 8 /8 2 3/4 168 8 6 8.125 PAE1NE9-0813 6 1/2 33 1/8 1/4 8 /8 2 3/4 15 8 8.125 PAME1NE9-0813 1/2 33 3/4 3/8 8 /8 2 3/4 196 8 8 8.125 PANE1NE9-0813 8 1/2 33 3/4 3/8 8 /8 2 3/4 212 10 4 10.25 PAE1NE9-1025 4 1/2 39 1/8 1/4 10 5/8 2 3/4 20 10 5 10.25 PAKE1NE9-1025 5 1/2 39 1/4 1/4 10 5/8 2 3/4 21 10 6 10.25 PAE1NE9-1025 6 1/2 39 1/4 1/4 10 5/8 2 3/4 225 10 10.25 PAME1NE9-1025 1/2 39 /8 3/8 10 5/8 2 3/4 246 10 8 10.25 PANE1NE9-1025 8 1/2 39 /8 3/8 10 5/8 2 3/4 264 10 10 10.25 PAPG9NE9-1025 10 5/8 41 5/8 3/8 10 5/8 2 3/4 33 12 5 12.25 PAKE1NE9-1225 5 1/2 45 5/8 1/4 12 /8 3 25 12 6 12.25 PAE1NE9-1225 6 1/2 45 5/8 1/4 12 /8 3 265 12 12.25 PAME1NE9-1225 1/2 46 1/4 3/8 12 /8 3 288 12 8 12.25 PANE1NE9-1225 8 1/2 46 1/4 3/8 12 /8 3 306 12 10 12.25 PAPG9NE9-1225 10 5/8 48 3/8 12 /8 3 41 12 12 12.25 PARG9NE9-1225 12 3/4 48 1/2 12 /8 3 485 14 5 13.5 PAKE1NE9-1350 5 1/2 50 3/8 1/4 14 1/4 3 308 14 6 13.5 PAE1NE9-1350 6 1/2 50 3/8 1/4 14 1/4 3 316 14 8 13.5 PANE1NE9-1350 8 1/2 51 3/8 14 1/4 3 35 14 10 13.5 PAPG9NE9-1350 10 5/8 52 3/4 3/8 14 1/4 3 40 14 12 13.5 PARG9NE9-1350 12 3/4 52 3/4 1/2 14 1/4 3 539 14 14 13.5 PASG9NE9-1350 14 3/4 53 1/2 1/2 14 1/4 3 623 16 6 15.5 PAE1NE9-1550 6 1/2 56 3/4 1/4 16 5/8 3 1/2 454 16 8 15.5 PANE1NE9-1550 8 1/2 5 3/8 3/8 16 5/8 3 1/2 49 16 10 15.5 PAPG9NE9-1550 10 5/8 59 1/8 3/8 16 5/8 3 1/2 612 16 12 15.5 PARG9NE9-1550 12 3/4 59 1/8 1/2 16 5/8 3 1/2 681 16 14 15.5 PASG9NE9-1550 14 3/4 59 /8 1/2 16 5/8 3 1/2 62 18 6 1.5 PAG9NE9-1550 6 1/2 62 1/2 1/4 18 5/8 3 1/2 481 18 8 1.5 PANG9NE9-1550 8 1/2 63 1/8 3/8 18 5/8 3 1/2 526 18 12 1.5 PARG9NE9-150 12 3/4 64 /8 1/2 18 5/8 3 1/2 13 18 14 1.5 PASG9NE9-150 14 3/4 65 5/8 1/2 18 5/8 3 1/2 91 18 16 1.5 PATJ9NE9-150 1 66 /8 1/2 18 5/8 3 1/2 943 20 8 19.5 PANG9NE9-1950 8 1/2 69 1/2 3/8 20 1/4 4 1/2 693 20 10 19.5 PAPG9NE9-1950 10 5/8 0 3/4 3/8 20 1/4 4 1/2 812 20 12 19.5 PARG9NE9-1950 12 3/4 1 1/2 20 1/4 4 1/2 882 20 14 19.5 PASG9NE9-1950 14 3/4 1 3/4 1/2 20 1/4 4 1/2 95 20 16 19.5 PATJ9NE9-1950 1 3 1/2 20 1/4 4 1/2 1112 24 8 23.5 PANG9NE9-2350 8 1/2 81 1/4 3/8 24 4 1/2 84 24 10 23.5 PAPG9NE9-2350 10 5/8 83 3/8 24 4 1/2 99 24 12 23.5 PARG9NE9-2350 12 3/4 82 3/4 1/2 24 4 1/2 1069 24 14 23.5 PASG9NE9-2350 14 3/4 83 1/2 1/2 24 4 1/2 113 24 16 23.5 PATJ9NE9-2350 1 84 3/4 1/2 24 4 1/2 1296 24 18 23.5 PAVJ9NE9-2350 19 85 3/4 24 4 1/2 138 24 20 23.5 PAWJ9NE9-2350 21 85 1/4 3/4 24 4 1/2 1538 FOW CONTRO For cylinder sizing please consult M.A. Stewart & Sons td with air supply information and service conditions. Specifications and dimensions are subject to change without notice. 02/16/11 www.mastewart.com