DM 6 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 7 m 3 /h Max head 8, m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity up to 1 CPS Available with NPT fittings (on request) OPERATING TEMPERATURES: PP min. +3 C / max +6 C PVDF min. +3 C / max +9 C Continuous operation: YES Warranty: 1 year, according to our general conditions of sale Spare parts: to identify the spare parts check the exploded views provided at the end of the operation and maintenance manual MODEL Kw MOTOR HP MOTOR SIZE RPM MOTOR SPECIFICATIONS DM6,2,3 B3+B 29,37, B3+B 29 THREE-PHASE 23/4 V-/6 HZ 2-POLE (availability single phase motor) efficiency class IE1 protection rating IP - Ambient temperature -3 C + 4 C / ATEX motor available THREE-PHASE 23/4 V-/6 HZ 2-POLE (availability single phase motor) efficiency class IE2 protection rating IP - Ambient temperature -3 C + 4 C / ATEX motor available ATTENTION: technical data for standard motor, for any special design with reference to the pumped fluid contact DEBEM s technical support. Intake connections G 1 f (or DN 2 on request) Delivery connections G 3/4 m (or DN 2 on request) Max. flow rate 7 m 3 /h Max. head 8, m Construction materials PP - PVDF 1/4
DM 6 Q (U.S. gpm) 1 1 2 2 3 8 7 6 Ø81 Ø7 2 2 4 Ø6 1 3 1 2 1 (m) H H(ft) 6 Ø6 Ø7 Ø81 2 4 (m) NPSH 3 2 1 1 NPSH (ft).3.2 Ø81 Ø7.1.2 Ø6.1 P (kw). 1 2 3 Q (m3/h) 4 6.1 P(HP) impeller motor,2 Kw (.3 HP) motor,37 Kw (. HP) ø 81mm* up to 1,2 up to 1,8 ø 7 mm up to 1, up to 2 ø 6 mm up to 1,8 up to 2 *standard The curves and performance values refer to pumps spare delivery outlet and water at 2 C, 2 pole motor Hz (29rpm). DEBEM s.r.l. Via Del Bosco, 41-212 Busto Arsizio (VA) - Italy - ph. +39 331 7434 - fax +39 331 7436 - www.debem.it - info@debem.it 2/4
DM 6 AVAILABLE MATERIAL INSTALLATION POSITIVE SUCTION HEAD PP PVDF DM6 PP/PVDF A DM6 PP/PVDF B C L M E F (Dimensions in mm) N O Ø 146 H G P 4 hole Ø 7 Packing: wooden case - 47 x 23 x 3 cm-weight 8 Kg (the weight only refers to the packaging without the pump in it). MODEL MOTOR SIZE POWER A B C E F G H L M N O P KG PP KG PVDF DM6 IEC 63,2 Kw 383 32 8 3/4 m (*) 1 f (*) 211 8 27 46 63 91 1 6,7 7 DM6 IEC 71,37 Kw 44 346 8 3/4 m (*) 1 f (*) 217 9 27 46 71 91 112 7, 7,8 DM6 NEMA 6C, Hp 436 377 8 3/4 m (*) 1 f (*) 228 9 27 46 89 91 112 - - (*)gas bsp or NPT DEBEM s.r.l. Via Del Bosco, 41-212 Busto Arsizio (VA) - Italy - ph. +39 331 7434 - fax +39 331 7436 - www.debem.it - info@debem.it 3/4
DM 6 DM COMPOSITION CODE ex. DM6P-SD1BE71 DM6 in PP, Thrust washer standard, O-Ring EPDM, Impeller Ø 81, Connection BSP, Motor flange Mec, Motor Cassing 71 DM6 P- S D 1 B E 71 PUMP MODEL DM6 PUMP BODY P - Polypropylene FC - PVDF +CF THRUST WASHER O-RING IMPELLER CONNECTION MOTOR FLANGE S - Standard (ceramic + PTFE Grafite) D - EPDM V - Viton DM6 1=Ø 81 2=Ø 7 3=Ø 6 * It can be supplied only the pump with American flange for coupling with NEMA motor Attention: when choosing a pump to pair with NEMA motor, the pump will be supplied with the specific flange but not the NEMA motor, which is not covered by our standard supply N - NPT B - BSP E - MEC U* - NEMA DM6 63 71 MOTOR CASSING PRODUCT APPLICATION DEBEM s.r.l. Via Del Bosco, 41-212 Busto Arsizio (VA) - Italy - ph. +39 331 7434 - fax +39 331 7436 - www.debem.it - info@debem.it 4/4
DM 1 Made in Italy product Available in PP-PVDF Below head use No welded seams Max. fl ow rate from 13 m 3 /h Max. head 14 m Extremely easy maintenance Low cost of spare parts No fl uid leaks Viscosity up to 1 cps Available with NPT connections (on request) OPERATING CONNECTION: PP min. +3 C / max. +6 C PVDF min. +3 C / max. +9 C Continuos operation: YES Warranty: 1 year, according to our general conditions of sale Spare parts: to identify the spare parts check the illustrations at the end of the operation and maintenance manual MODEL Kw MOTOR HP MOTOR SIZE RPM MOTOR SPECIFICATIONS DM1,,7 B3+B 29,7 1 B3+B 29 THREE-PHASE 23/4 V - /6 HZ - 2 POLES (single phase motor available) effi ciency class IE1 protection rating IP - Ambient temperature -3 C + 4 C / ATEX motor available THREE-PHASE 23/4 V - /6 HZ - 2 POLES (single phase motor available) effi ciency class IE2 protection rating IP - Ambient temperature -3 C + 4 C / ATEX motor available ATTENTION: technical data for standard motor, for special request please contact DEBEM technical department. Intake connections G 1 1/2 f (or DN 4 on request) Delivery connections G 1 m (or DN 2 on request) Max. flow rate 13 m 3 /h Max. head 14 m Construction materials PP - PVDF 1/4
DM 1 Q (U.S. g.p.m.) 1 1 2 2 3 3 4 4 1 Ø98 4 1 Ø8 3 Ø7 2 1 H (m) H(ft) 8 7 6 Ø7 Ø8 Ø98 2 (m) NPSH 4 3 2 1 1 NPSH(ft).6.8. Ø98.7.6.4..3 Ø8.4.2 Ø7.3.2 (kw) P.1.1 P(HP).. 1 2 3 4 6 7 8 9 1 11 12 13 Q (m 3 /h) impeller motor, Kw (.7 HP) motor,7 Kw (1 HP) ø 98mm* up to 1,1 up to 1, ø 8 mm up to 1,6 up to 2 ø 7 mm up to 2 up to 2 *standard The curves and performance values refer to pumps with free spare delivery outlet, water at 2 C, 2 pole motor Hz (29rpm). DEBEM s.r.l. Via Del Bosco, 41-212 Busto Arsizio (VA) - Italy - ph. +39 331 7434 - fax +39 331 7436 - www.debem.it - info@debem.it 2/4
DM 1 AVAILABLE MATERIALS INSTALLATIONS POSITIVE SUCTION HEAD PP PVDF DM1 PP/PVDF A DM1 PP/PVDF B C L M E F (Dimensions in mm) N O Ø 146 H G P 4 hole Ø 7 Packaging for pump with, Kw motor: wooden crate cm 47 x 23 x 3 weight 8 Kg Packaging for pump with,7 Kw motor: wooden crate cm x 29 x 41 weight 11 Kg (the weight only refers to the packaging without the pump inside). MODEL MOTOR SIZE POWER A B C E F G H L M N O P KG PP KG PVDF DM1 IEC 71, Kw 417 349 68 1 m (*) 1 1/2 f (*) 229 9 2 47 71 91 112 8,2 8, DM1 IEC 8,7 Kw 49 391 68 1 m (*) 1 1/2 f (*) 346 1 2 47 8 91 12 9,2 9, DM1 NEMA 6C,7 Hp 448 38 68 1 m (*) 1 1/2 f (*) 24 9 2 47 89 91 112 - - DM1 NEMA 143TC 1, Hp 482 414 68 1 m (*) 1 1/2 f (*) 24 9 2 47 89 91 112 - - (*)gas bsp or NPT DEBEM s.r.l. Via Del Bosco, 41-212 Busto Arsizio (VA) - Italy - tel. ph. +39 331 7434 - fax +39 331 7436 - www.debem.it - info@debem.it 3/4
DM 1 DM COMPOSITION CODE ex. DM1P-SD1BE71 DM1 PP, Thrust washer standard, O-Ring EPDM, Impeller Ø 98 mm, Connection BSP, Motor flange MEC, Motor Casing 71 DM1 P S D 1 B E 71 PUMP MODEL DM1 PUMP BODY P - Polypropylene FC - PVDF +CF THRUST WASHER O-RING IMPELLER CONNECTION MOTOR FLANGE S - Standard (ceramic + PTFE Graphite) D - EPDM V - Viton DM1 1=Ø 98 2=Ø 8 3=Ø 7 * It can be supplied only the pump with American flange for coupling with NEMA motor Attention: when choosing a pump to pair with NEMA motor, the pump will be supplied with the specific flange but not the NEMA motor, which is not covered by our standard supply N - NPT B - BSP E - MEC U* - NEMA DM1 71 8 MOTOR CASING APPLICATIONS DEBEM s.r.l. Via Del Bosco, 41-212 Busto Arsizio (VA) - Italy - ph. +39 331 7434 - fax +39 331 7436 - www.debem.it - info@debem.it 4/4
DM 3 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 3 m 3 /h Max head 24 m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity up to 1 CPS Available with NPT fittings (on request) OPERATING TEMPERATURES: PP min. +3 C / max +6 C PVDF min. +3 C / max +9 C Continuous operation: YES Warranty: 1 year, according to our general conditions of sale Spare parts: to identify the spare parts check the exploded views provided at the end of the operation and maintenance manual MODEL Kw MOTOR HP MOTOR SIZE RPM MOTOR SPECIFICATIONS DM3 2,2 3 B3+B 29 3 4 B3+B 29 4, B3+B 29 THREE-PHASE 23/4 V-/6 HZ 2-POLE (availability single phase motor) efficiency class IE2 protection rating IP - Ambient temperature -3 C + 4 C / ATEX motor available THREE-PHASE 23/4 V-/6 HZ 2-POLE efficiency class IE1 protection rating IP - Ambient temperature -3 C + 4 C THREE-PHASE 23/4 V-/6 HZ 2-POLE efficiency class IE1 protection rating IP - Ambient temperature -3 C + 4 C ATTENTION: technical data for standard motor, for any special design with reference to the pumped fluid contact DEBEM s technical support. Intake connections G 2 f (or DN on request) Delivery connections G 1/4 m (or DN 4 on request) Max. flow rate 3 m 3 /h Max. head 24 m Construction materials PP - PVDF 1/4
DM 3 Q (U.S. gpm) 1 2 3 4 6 7 8 9 1 11 12 13 14 1 3 1 2 2 1 1 Ø134 Ø122 Ø11 9 8 7 6 4 3 (m) H 2 1 H (ft) 8 7 6 Ø11 Ø122 Ø134 2 4 (m) NPSH 3 2 1 1 NPSH (ft) 2. Ø134 3. 2. 1. Ø122 2. 1. Ø11 1. 1. (kw) P.... P (HP) 1 1 2 2 3 3 Q(m3/h) impeller motor 2,2 Kw (3 HP) motor 3 Kw (4 HP) motor 4 Kw (. HP) ø 134 mm* fino a 1,1 fino a 1,8 fino a 1,8 ø 122 mm fino a 1,4 fino a 2 fino a 2 ø 11 mm fino a 1,8 fino a 2 fino a 2 *standard The curves and performance values refer to pumps spare delivery outlet and water at 2 C, 2 pole motor Hz (29rpm). DEBEM s.r.l. Via Del Bosco, 41-212 Busto Arsizio (VA) - Italy - ph. +39 331 7434 - fax +39 331 7436 - www.debem.it - info@debem.it 2/4
DM 3 AVAILABLE MATERIAL INSTALLATION POSITIVE SUCTION HEAD PP PVDF DM3 PP/PVDF A B C DM3 PP/PVDF L M E F (Dimensions in mm) N O Ø 146 H G P 4 hole Ø 7, 1, 7, 7 Packing for pump with 2,2 Kw motor: wooden case cm 61 x 29 x 41 weight 12 Kg Packing for pump with 3 Kw motor: wooden case cm 64 x 29 x 44 weight 13 Kg Packing for pump with 4 Kw motor: wooden case cm 69 x 37 x 48 weight 1 Kg (the weight only refers to the packaging without the pump in it). MODEL MOTOR SIZE POWER A B C E F G H L M N O P KG PP KG PVDF DM3 IEC 9 2,2 Kw 499 48 91 1 1/2 m (*) 2 f (*) 38 12 31 66 9 14 14 - - DM3 IEC 1 3 Kw 24 433 91 1 1/2 m (*) 2 f (*) 31 14 31 66 1 14 16 - - DM3 IEC 112 4 Kw 49 48 91 1 1/2 m (*) 2 f (*) 322 14 31 66 112 14 19 - - DM3 NEMA 14TC 3 Hp 41 4 91 1 1/2 m (*) 2 f (*) 337 127 31 66 14 139 - - DM3 NEMA 184TC Hp 68 17 91 1 1/2 m (*) 2 f (*) 328 139 31 66 89 14 19 - - (*)gas bsp or NPT DEBEM s.r.l. Via Del Bosco, 41-212 Busto Arsizio (VA) - Italy - tel. ph. +39 331 7434 - fax +39 331 7436 - www.debem.it - info@debem.it 3/4
DM 3 DM COMPOSITION CODE ex. DM3P-SD1BE9 DM3 in PP, Thrust washer standard, O-Ring EPDM, Impeller Ø 134, Connection BSP, Motor flange Mec, Motor Cassing 9 DM3 P- S D 1 B E 9 PUMP MODEL DM3 PUMP BODY P - Polipropilene FC - PVDF +CF THRUST WASHER O-RING IMPELLER CONNECTION MOTOR FLANGE S - Standard (ceramica + PTFE Grafite) D - EPDM V - Viton * It can be supplied only the pump with American flange for coupling with NEMA motor DM3 1=Ø 134 2=Ø 122 3=Ø 11 N - NPT B - BSP E - MEC U* - NEMA DM3 9 1 122 MOTOR CASSING PRODUCT APPLICATION DEBEM s.r.l. Via Del Bosco, 41-212 Busto Arsizio (VA) - Italy - ph. +39 331 7434 - fax +39 331 7436 - www.debem.it - info@debem.it 4/4