Universal Snap-In Hangers CABLE MANAGEMENT Stackable Snap-In Hanger Kits for 1/2 cable and LMR-600, 10-pack 82-2803 for 5/8 cable, 10-pack 82-2804 for 7/8 cable, 10-pack 82-2805 for EW52 Waveguide, 10-pack 82-2809 for EW63 Waveguide, 10 pack 82-2599 for EW77 Waveguide, 10 pack 82-2818 for EW90 Waveguide, 10 pack 82-2819 Standard/Butterfly Hanger Kit - Hardware not included for LMR-400 cable, 10-pack 82-2830 for 1/2 cable and LMR-600, 10-pack 82-2043 for 5/8 cable, 10-pack 82-2041 for 7/8 cable, 10-pack 82-2835 for EW52 Waveguide, 10-pack 82-2828 for EW63 Waveguide, 10-pack 82-2829 Angle Adapter, 3/8 tapped hole for standard 82-2870 or clip-on hangers, 10-pack, includes hardwarere Angle Adapter for Snap-in Hangers, 10-pack 82-2871 (two 3/4 holes for two snap-in hangers) Universal Angle Adapter with insert to 82-2872 convert 3/4 snap in hole to 3/8 tapped hole for standard or clip-on hangers, 10-pack includes hardware Spare Hardware Kit for Hangers, Stainless Steel, 82-2270 10-pack, 3/8 dia. x 3/4 long bolt, nuts and lockwashers Round Tower Standoff Adapter, 10-pack for 2 to 3 diameter, with 3/8 tapped hole for standard or clip-on hangers with round member adapter clamp 82-2876-3 without round member adapter clamp- 82-2876-0 order seperately below (82-2881-x) Round Tower Snap-in Standoff Adapter, 10-pack 82-2878-3 for 2 to 3 diameter, with 3/4 Hole for snap-in hangers Round Tower Snap-in Standoff Adapter 82-2878-0 with 3/4 Hole for snap-in hangers, 10-pack, (order round member adapter 82-2881-x separtately below) Round Member Adapter Clamp, 10-pack for 1 to 2 diameter pole 82-2881-2 for 2 to 3 diameter pole 82-2881-3 for 3 to 4 diameter pole 82-2881-4 for 4 to 5 diameter pole 82-2881-5 for 5 to 6 diameter pole 82-2881-6 Wall Mount Coax Brackets for standard or snap-in hangers with 7x 3/8 and 3/4 hole pairs (11 length) 82-2864-4 with 14x 3/8 and 3/4 hole pairs (23 length) 82-2864-8 for 1/2 cable and LMR-600, 10-pack 82-2271 for 7/8 cable, 10-pack 82-2815 for 1-1/4 cable, 10-pack 82-2816 for 1-5/8 cable, 10-pack 82-2817 Installation Tool for Snap-in hangers 68-1064 Clip-On Hanger Kits for 1/2 cable and LMR-600, 10-pack, includes hardware 82-2843 for 7/8 cable 10-pack, includes hardware 82-2845 Mini Cluster Snap-in Adapter Block, 10-pack 82-2873 with 3x 3/4 holes and 3x 3/8 holes for snap-in or standard hangers (mounts with 82-2870 or 82-2876-x). Hardware not included Three-way Snap-in Stand-off Adapter Only, 10-pack 82-2874-0 (order round member adapter 82-2881-x separtately below) Round Tower Universal Standoff Adapter, 10-pack with insert to convert 3/4 snap-in hole to 3/8 tapped hole for use with standard & clip-on hangers with adapter clamp for 1 to 2 diameter pole 82-2880-2 for 2 to 3 diameter pole 82-2880-3 for 3 to 4 diameter pole 82-2880-4 for 4 to 5 diameter pole 82-2880-5 Round Tower Universal Standoff Adapter, 10-pack 82-2880-0 (order round member adapter 82-2881-x separtately below) Stainless Steel Banding Kit 75-0021 Includes 100 ft. 1/2 band, 100 buckles and tool Star Support T-Bracket 82-2865 with 12x 3/8 and 12x 3/4 holes for 1½ to 5-9/16 OD round members or 2½ to 5 angle members Universal Strut for Snap-In Hangers, 82-2867-82867 8 8ft Section, 3/4 holes on 3 centers (cut to length) (UPSable)
GROUNDING PRODUCTS Grounding Kits Universal Grounding Kit for 1/4 to 1-5/8 cable, 5 ft. ground cable, lug unattached 82-2970-5U Standard Grounding Kits for LMR-240 cable, 5 ft. ground cable, lug unattached 82-4546-5U for LMR-400 cable, 5 ft. ground cable, lug unattached 82-4547 for LMR-600 cable, 5 ft. ground cable, lug unattached 82-2652 for LMR-900 cable, 5 ft. ground cable, lug unattached 82-4548 for 1/4 and 3/8 cable, 2 ft. ground cable, lug attached 82-2973-2A for 1/2 cable, 2 ft. ground cable, lug attached 82-2974-2A for 5/8 & 7/8 cable, EW90 Waveguide, 2 ft. ground cable, lug attached 82-2040 for 1-1/4 cable, 2 ft. ground cable, lug attached 82-2977-2A for 1-5/8 cable, EW52/EW63 Waveguide, 2 ft. ground cable, lug attached 82-2978-2A for 2-1/4 cable, 2 ft. ground cable, lug attached 82-2979-2A Clip-on Grounding Kits for 1/2 Heliax cable, 5 ft. ground cable, lug unattached 94-2184 for 5/8 Heliax cable, 5 ft. ground cable, lug unattached 94-2185 for 7/8 Heliax cable, 5 ft. ground cable, lug unattached 82-2982-5U for 1-1/4 Heliax cable, 5 ft. ground cable, lug unattached 82-2983-5U Universal Copper Ground Bars - 5/8 to 1 spacing 2 x 10 with 10 hole pairs for 3/8 bolts, no hardware 82-2990 2 x 14 with 15 hole pairs for 3/8 bolts, no hardware 82-2991 4 x 12 with 26 hole pairs for 3/8 bolts, no hardware 82-2992 Universal Tinned Copper Ground Bars 2 x 10 with 10 hole pairs for 3/8 bolts, no hardware 82-2990-T 2 x 14 with 15 hole pairs for 3/8 bolts, no hardware 82-2991-T 4 x 12 with 26 hole pairs for 3/8 bolts, no hardware 82-2992-T Universal Copper Ground Bar with shelter mounting hardware 2 x 10 with 10 hole pairs for 3/8 bolts 82-2990-SB 2 x 14 with 15 hole pairs for 3/8 bolts 82-2991-SB 4 x 12 with 26 hole pairs for 3/8 bolts 82-2992-SB Universal Copper Ground Bar with tower mounting hardware 2 x 10 with 10 hole pairs for 3/8 bolts 82-2990-TB 2 x 14 with 15 hole pairs for 3/8 bolts 82-2991-TB 4 x 12 with 26 hole pairs for 3/8 bolts 82-2992-TB 3/8 Stainless Bolt Hardware Kit, includes 3/8-16 X 3/4 bolt, lockwasher and nut, 10-Pack 43-1313 Corrosion Preventing Compound, 5 oz. tube 75-2025 3ft Rack Vertical Ground Bar Kit with 1/4-20 threaded hole pairs (5/8 centers), 1/4 x 5/8 x 36, with hardware 19-3640-3 6ft Rack Vertical Ground Bar Kit with 1/4-20 threaded hole pairs (5/8 centers), 1/4 x 5/8 x 72, with hardware 19-3640-6 01/04/13
GROUNDING PRODUCTS Shelter Mounting Bracket Kits Tower Mounting Bracket Kits for mounting ground bar to shelter 82-2996 (pair), includes hardware Anti-theft Shelter Mounting Bracket Kit includes special hardware and bit 82-2996-ASB Grounding Cable 19-Strand Copper, Insulated Green Jacket, (sold by the foot) #6 AWG (1/4 OD Jacket) 94-2192-GN #2 AWG (3/8 OD Jacket) 94-2190-GN for mounting ground bar to tower 82-2997 (pair), includes hardware Universal Mounting Bracket Kit 82-2998 for mounting ground bars to shelter or tower (4pcs), includes hardware Standoff Insulator to isolate ground bars 82-2999 1.75 from mounting surface (3/8-16 hardware not included) Universal One-hole Screw Lug 15-4415 for #4 to 14 AWG with 1/4 Bolt Hole, (with screw terminal) Universal One-hole Screw Lug 15-4419 for #8 to 1/0 AWG, with 3/8 Bolt Hole, (requires 1/4 allen wrench) One-Hole Crimp Lug, Standard Barrel, for #6 AWG cable, with 3/8 Bolt Hole 16-5673 One-Hole Crimp Lug, Standard Barrel, for #2 AWG cable, with 3/8 Bolt Hole 16-5683 Two-Hole Crimp Lug, Long Barrel, for #6 AWG, with 1/4 Bolt Holes, 5/8 spacing 16-5674 Two-Hole Crimp Lug, Long Barrel, for #2 AWG, with 1/4 Bolt Holes, 5/8 spacing 16-5684 Two-Hole Crimp Lug, Long Barrel, for #6 AWG, with 3/8 Bolt Holes, 1 spacing 16-5675 Two-Hole Crimp Lug, Long Barrel, for #2 AWG, with 3/8 Bolt Holes, 1 spacing 16-5685 Two-Hole (Elongated) Crimp Lug for #6 AWG cable, with 3/8 Bolt Holes, 3/4 to 1 spacing 16-5676 Suppressor Grounding Ring Lug for attachment to N-Female Bulkhead for #6 AWG wire 82-6438 Suppressor Grounding Ring Lug Cable Kit with #6 AWG Grounding Wire Attached, 6ft length 94-3130-6 Professional Hand Crimp Tool ol 68-1062 Adhesive Heat Shrink Tubing Kits (Pre-cut Lengths) to Crimp Cable Lugs to #8-#2 Awg Grounding Cable for #6 lugs (1/4 OD x 1-1/8 long) for #2 lugs (1/2 OD x 1-3/8 long) for general use (3/4 OD x 3 long) 16-8605-25PK 16-8607-25PK 16-8608I3-25PK Standard Copper Ground Rod, 5/8 x 8 ft 15-4422-8 Ground Rod Clamp, 5/8, to secure #10-#2 AWG ground wire to ground rod 15-4416 Heavy Duty Long Copper Ground Rod, 3/4 x 10 ft 15-4423-10 Ground Rod Clamp, 3/4, to secure #10-#2 AWG ground wire to ground rod 15-4417 Ground Rod Driver Tool for 5/8 Ground Rods 68-1065 5/8 Replacement Insert for Ground Rod Driver Tool 68-1067 3/4 Insert for 5/8 Ground Rod Driver Tool (68-1065 above) 68-1068 01/04/13
PORT PRODUCTS / WEATHERIZING Port Entry Feed-thru (4 ) Panels Single Hole, 5.5 x5.5 82-2910-1 Single Hole, 7 x7 82-2910-1A 2-hole, 15.5 x 9.5 (1x2) 82-2910-2 3-hole, 20 x 9.5 (1x3) 82-2910-3 Feed-thru Boot (4 ) & Cushions with single hole 1/2 (shown) 82-2916-1 with 2 holes 1/2 (shown) 82-2916-2 with 3 holes 1/2 82-2916-3 with 4 holes 1/2 82-2916-4 with single hole 7/8 82-2917-1 with 2 holes 7/8 82-2917-2 with 3 holes 7/8 (shown) 82-2917-3 with 4 holes 7/8 82-2917-4 with 1 hole for EW52 Waveguide 82-2940 with 1 hole for EW63 Waveguide 82-2941 with 1 hole for EW90 Waveguide 82-2942 4-hole, 25.5 x 9.5 82-2910-4 4-hole, 17.5 x 17.5 (2x2) 82-2910-4A Standard Port Cushions Blank (no holes) 82-2919 with 6 holes for LMR-400 coax 82-2920-6 with 1 holes for LMR-600 coax 82-2921-1 with 2 holes for LMR-600 coax 82-2921-2 with 3 holes for LMR-600 coax 82-2921-3 with 4 holes for LMR-600 coax 82-2921-4 with 1 hole for 5/8 Heliax 82-2923-1 6-holes, 23 x 17.5 (2X3) 82-2910-6 Cushion Plug for LMR-600, Pkg of 5 82-2931 for 1/2 Foam Coax, Pkg of 5 82-2933 for 7/8 Foam Coax, Pkg of 5 82-2934 Port Entry Sealing Cap (4 ) 82-2913 Fusion Tape, 20 foot roll 16-8506 Fusion Tape, 5 foot roll 16-8506-5 Universal Weatherproofing Kit 82-6548 Includes: 1 roll 2 PVC tape, 6 rolls 2-1/2 butyl rubber tape, 2 rolls 3/4 PVC tape Lace-Up Hoisting Grip for terminated or unterminated: LMR-600 and 1/2 Cable 82-2959 LMR-900 and 5/8 Cable 82-2960 7/8 Cable 82-2961 1-1/4 Cable 82-2962 Boot Assembly Only (order cushion insert separately) 82-4927 Cold Shrink Tubing (.48 to.95 ID) 16-8541 Adhesive Heat Shrink Tubing (by the foot) 1/4 OD Flexible 16-8532 3/8 OD Flexible 16-8533 1/2 OD Flexible 16-8534 3/4 OD Flexible 16-8536 1 OD Flexible 16-8537 1-1/2 OD Flexible 16-8538 Pre-Laced Hoisting Grip for unterminated: LMR-400 Cable 82-2950 LMR-600 and 1/2 Cable 82-2951 LMR-900 and 5/8 Cable 82-4933 7/8 Cable 82-2953 01/04/13