Parts Book Spray Height Control Systems Effective Date: October 1, 2014 precision Spray Height Control

Similar documents
BOOM HEIGHT CONTROL PRECISION DEFINED SPRAYING REFINED

Spray Height Control Systems. Unprecedented spray height accuracy combined with the control you need. Guaranteed.

Trimble FMX Display Kit Installation Manual 54VT-TB-FMX

Rogator 854, 1054 & 1254 Series Installation Manual RG4

Case IH 3150, 3185, 3200, 3310, Tyler Patriot Installation Manual CS2

Top Air (1200/ /90 ft Boom) Installation Manual TA1

Spray Height Controller

Miller Condor & New Holland Rear Mount Truss Boom Installation Manual MC02

Spray Height Controller

Rogator 64 and 74 Series and Willmar Eagle 8650 (JIC) & 84, 94 & 1386 Series (Flat Faced O-Ring) Installation Manual RG2 & RG6

John Deere (4730 & 4830) with Proportional Main Lift Installation Manual JD08

Hardi. Precision Defined. precision Spray Height Control

Nitro (4000 Series) Installation Manual NT04

John Deere 4730, 4830 Installation Manual JD8

Goldacres Passive Roll G8 Installation Manual GA02

SUMMERS Pull-Type with Proxy Switch Sense Installation Manual SM2

Top Air (TA 1200/1600, 80/90 Boom) Installation Manual TA01

Spray Height Controller

John Deere R4030, R4038 and R4045 Installation Manual JD12

Spray Height Controller

MS Sprayers NT 1000/1250 Installation Manual MS1

Case IH (4420, 3320) Installation Manual CS03

Intelliview IV on NH Guardian Sprayers Display Kit Installation Manual 54VT-IV-SP01

Hardi North America/Australia AutoHeight Installation Manual HD03

FLEXI-COIL 67 Series (1999+) Installation Manual FC1

Fast Standard Control Installation Manual FT4

Rogator Passive Roll (2012+) 5 Height Sensors Installation Manual RG11

HARDI Economy EAGLE Installation Manual HD9

Rogator Active Roll (2012+) Installation Manual RG12

Rogator Passive Roll (2012+) 3 Height Sensors Installation Manual RG10

John Deere GS2 2600, 1800 and GS JD 4630 Display Kit Installation Manual GS2-SP02

Spray Height Controller

John Deere (4730 & 4830) Active Roll with Proportional Main Lift Installation Manual JD08A

Spray Height Controller

Rogator Passive Roll (2012+) 5 Height Sensors Installation Manual RG11

Hagie (STS 90/ ) Installation Manual HG03

Hagie 264, 284XP, DTS8, 2100, 2101, DTS10 Installation Manual HG2

Spray Height Control System

AGCO América do Sul (Factory Install) Installation Manual SP01

Spray Height Controller

Spray Height Controller

Hardi Europe AutoSlant DAH or DAH09 Installation Manual HD5

Topcon X30 Display Kit Installation Manual 54VT-TC-X30

Spray Height Controller

Spray Height Control System

Spray Height Controller

Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No.

Topcon X30 Display Kit Installation Manual 54VT-TC-X30

SPARE PARTS PRICE LIST SEAKEEPER SERIES

UC4. Total Control Automatic Boom Height System. Redball 690 (2006+) Installation Manual

Spray Height Controller

FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC

Clutch Control. PN: November 2013 Rev E 1

Open Center Compact Valve Custom Installation Guide Rev A

UC4. Total Control Automatic Boom Height System. Raptor Pro 1200 (2004) Installation Manual

AutoBoom Installation Manual

DISCLAIMER. COPYRIGHT 2010 by ATI Corporation 250 Earland Drive New Holland, PA U.S.A.

US Dollar Price List Precision Farming Products

UC4. Total Control Automatic Boom Height System. NITRO (Miller 200 Series 1999+, 120-ft Boom) Installation Manual

MONITORS AND CONTROLS. Liquid filled 100 PSI pressure gauge.

SureFire Drives and Harnesses for use with John Deere Dry Rate Controller

Sprayer Control. Manual for SprayLink Cable Installations. Tank. Jet Agitator. Agitator Valve. Diaphragm Pump. Pressure Transducer.

Instructions for 2-row monitoring only

ANALOG. PARAMETER SPECIFICATION Measured Variable: Displacement, Velocity (magnitude only) 16 bit or mm, whichever is greater

UC3 Sprayer Boom Control Operator s Manual

ISOBUS Down Force Hydraulics Kinze

MF 9520 / 9540 / 9560, Challenger 540C / 560C

Heavy Duty Hydrostatic Transmissions

EVRARD Auto Slant End User Installation Manual EV5-E

CANBUS G. Up to mm ( in.) < ± 0.01% of full stroke or ± 0.04 mm ( in.), whichever is greater*

AutoSteer Installation Guide

Adjustment range. Seal material. Pressure connection

Instructions for 2-row monitoring only

SECTION 10 - ELECTRICAL

SR1A-A2. Functional Description HA /2012. Directly Operated Pressure Relief Valves. Replaces HA /2010. Screw-in cartridge design

Multi Pro WM Turf Sprayer

2-row and All-row systems included.

Spray Height Control System

Case IH 3320, 3330, and Booms AutoBoom Installation Manual. P/N Rev B 06/15

VPN2-10/MR. Functional Description HU /2008. Pilot Operated Pressure Relief Valves. Replaces HU /2005

AutoFarm GPS AutoSteer Hardware Installation Guide

PRESSURE TRANSDUCERS. Specifications. Individual Specifications

SPARE PARTS PRICE LIST M SERIES

SAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves

8/6/2013 LX-30 MACHINES: COPYRIGHT 6/10/10 ALL RIGHTS RESERVED

1300 Dozer Owner s Manual & Parts Book

S P R AY E R VA L V E S AND C O N T ROL S C AT A L OG

Product Data Sheet. Part Number: Gen 2 Back of Cab. Product Technical Specifications

CMA90 Advanced Independent-Metering Mobile Valve

Sprayer Products Booklet

SSI. Synchronous Serial Interface

& Tower for PWM Control. Maximum Application Rates with Two 5.3 GPM Electric Pumps

Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions

Isonic Mod 3 Series 3000/ /2, 3/2 Direct - 4/2 Single & Double Solenoid Valves

MDG Mobile Directional Valve Build Kit. MDG for Mobile Equipment Flows to 60 I/min (15.8 US gpm)

PARTS BOOK CATALOG IMPLEMENT ASSEMBLIES STANDARD BOOM 3PT HITCH MOUNT

Rostselmash Torum 740

Table of Contents PRICE LIST PRODUCT PAGE PUMPS PWM Controlled Hydraulic Pumps A-4 GEMINI Dual Pump Kit A-5 FMC-75-HYD Series A-6 FMC-HYD Series A-6

Calibration & Operation Manual

Kit. Hydraulic Kit Installation Guide REV B Table 1 Component List. Item Component Part Number Qty

Transcription:

www.norac.ca Precision Defined Spraying Refined. 4 5 2015 Parts Book Spray Height Control Systems Effective Date: October 1, 2014 precision Spray Height Control

NORAC is the first independent height control system to receive ISOBUS certification.. 4 5 Effective October 1, 2014 ~ Printed in Canada Revision b.

Table of Contents UC5 Spray Height Control UC5 Display Kits... 2 NORAC Approved Virtual Terminals and Displays... 3 UC5 Display Parts... 4 UC5 Options... 8 UC5 Service Parts... 10 UC5 Service Tools... 11 UC5 Common Parts... 12 UC5 Sprayer Specific Electrical Parts... 15 Click To Navigate UC4.5 Spray Height Control UC4.5 Options... 18 UC4.5 Service Tools... 22 UC4.5 Common Parts... 24 UC4.5 Sprayer Specific Electrical Parts... 26 UC4+ Spray Height Control UC4+ - Discontinued... 28 UC4+ Options... 29 UC4+ Service Parts... 32 UC4+ Service Tools... 33 UC4+ Common Parts... 34 UC4+ Sprayer Specific Electrical Parts... 36 Hydraulic Components (UC5, UC4.5 and UC4+ ) Hydraulic Parts - Current Models... 40 Hydraulic Parts - Discontinued... 42 Open Center Compensated Proportional Valve Block... 44 Active Roll Control for John Deere Sprayers... 45 Linear Roll Cylinder and Linear Spring Damper... 46 Recharge Kit for Hydraulic Cylinder... 46 Additional Hydraulic Parts... 47 Other Contact Us... 49

www.norac.ca UC5 Display Kits PULSE The NORAC PULSE display offers a stand-alone option for the UC5 Spray Height Control system. The PULSE offers new functionality, user friendly diagnostics, and an easy to use color touchscreen. This stand-alone display is compact and minimizes cab clutter. UC5 Display Kits NORAC PULSE Display PULSE-PT01 PULSE Display Terminal Kit Kit PULSE-PT01 PULSE-SP01 PULSE Display Terminal Kit for UC5 Spray Height Control system for Pull Type Sprayers PULSE Display Terminal Kit for UC5 Spray Height Control system for Self-Propelled Sprayers ECHO - Discontinued NORAC ECHO Display ECHO-DT1 ECHO Display Terminal Kit Kit ECHO-DT1L ECHO Refurbished Display Terminal Kit for UC5 Spray Height Control system for Self Propelled Sprayers 43700L ECHO Display Panel with Power Switch Loaner 105421 Ram-B-101U Unpkd Ram Mount w/2 Ram-B-202 Bases 106586 ECHO Recovery Kit - 2 SD Cards 2 precision Spray Height Control

UC5 Spray Height Control NORAC Approved Virtual Terminals and Displays NORAC s UC5 Spray Height Control System is ISOBUS certified and can be operated through a virtual terminal and other compatible displays. NORAC approved virtual terminals and compatible displays are listed below. Ag Leader VERSA TM Mueller COMFORT Ag Leader INTEGRA TM Mueller TOUCH Ag Leader EDGE TM AFS Pro 300/ Ag Leader IntellView TM InSight TM Plus lll AFS Pro 600/ IntellView TM Plus ll AFS Pro 700/ IntellView TM Plus lv Trimble FmX RoGator Outback Management TeeJet 570VT Topcon X30 MAX TM Center John Deere GS TM 2 Kverneland Group IsoMatch Tellus John Deere GS TM 3 Kverneland Group Tellus UC5 VT/Display Cable Kits Please contact NORAC to inquire about compatibility with other virtual terminals and displays. Virtual Terminal and Display Cable Kits Kit 54VT-GS2-PT01 Cable Kit for John Deere GS 2 1800 and 2600 and GS 3 2630 (All John Deere Tractors with GS 2 and GS 3 Displays) 54VT-GS2-PT02 Cable Kit for John Deere GS 2 1800 and 2600 and GS 3 2630 (All European Trailed Sprayers) 54VT-GS2-SP01 Cable Kit for John Deere GS 2 1800 and 2600 and GS 3 2630 (All John Deere Self Propelled, Except 4630) 54VT-GS2-SP02 Cable Kit for John Deere GS 2 1800 and 2600 and GS 3 2630 (John Deere 4630) 54VT-GS2-SP03 Cable Kit for John Deere GS 2 1800 and 2600 and GS 3 2630 (John Deere R4030 and R4038) 54VT-GS2-SP04 Cable Kit for John Deere GS 2 1800 and 2600 and GS 3 2630 (John Deere R4045) 54VT-IV-SP01 Cable Kit for Intelliview IV on New Holland Guardian Sprayers 54VT-OB-MAX Cable Kit for Outback MAX (Self Propelled and Pull Type Sprayers) 54VT-PRO-PT01** Cable Kit for Case AFS PRO 300, 600 and 700 and New Holland IntelliView II, III and IV (All Case and New Holland ISOBUS ready tractors) 54VT-PRO-SP01 Cable Kit for Case AFS PRO 300, 600 and 700 on Case Self Propelled Sprayers 54VT-TB-FMX Cable Kit for Trimble FmX (Self Propelled and Pull Type Sprayers) 54VT-TC-X30 Cable Kit for Topcon X30 Virtual Terminal (Self Propelled and Pull Type Sprayers) 54VT-TJ-570 Cable Kit for TeeJet Matrix 570VT (not compatible with the Matrix 570G) (Self Propelled and Pull Type Sprayers) Ag Leader Cable Kits and Displays - Available from Ag Leader ** Check product manuals for alternate cables before ordering. ISOBUS Interface Cables Part 43260-17 Cable, UC5 Interface CANbus Mueller VT 43260-19 Cable, UC5 Interface IBIC Used to connect UC5 control module to the ISOBUS (9 pin) connector on back of tractor. precision Spray Height Control 3

www.norac.ca UC5 Display Parts UC5 Display Parts Kit Part Model - 54VT-GS2-PT01 43240-26 Cable, UC5 Interface Switch Box 43260-02 Cable, UC5 Interface CANBus VT John Deere GS2/GS3 44602-01 Box Switch UC5 Remote Hand Control 54VT-GS2-PT02 43240-26 Cable, UC5 Interface Switch Box 43260-08 Cable, UC5 Interface CANBus 4 Pin DT 44602-01 Box Switch UC5 Remote Hand Control 54VT-GS2-SP01 43240-26 Cable, UC5 Interface Switch Box 43260-02 Cable, UC5 Interface CANBus VT John Deere GS2/GS3 44602-01 Box Switch UC5 Remote Hand Control 54VT-GS2-SP02 43240-26 Cable, UC5 Interface Switch Box 43260-08 Cable, UC5 Interface CANBus 4 Pin DT 44602-01 Box Switch UC5 Remote Hand Control 54VT-GS3-SP03 43240-26 Cable, UC5 Interface Switch Box 43260-28 Cable, UC5 Interface CANBus VT JD R403X 44602-01 Box Switch UC5 Remote Hand Control 54VT-IV-SP01 43240-26 Cable, UC5 Interface Switch Box 43250-10 Cable, UC5 Network Power Jumper 43260-11 Cable, UC5 Interface HD 16 9 Pin to 6 Pin DT 44602-01 Box Switch UC5 Remote Hand Control 54VT-OB-MAX 43240-26 Cable, UC5 Interface Switch Box 43260-29 Cable, UC5 Interface DT 4 Pin 12 inch Stub 44602-01 Box Switch UC5 Remote Hand Control 4 precision Spray Height Control

UC5 Spray Height Control Kit Part Model - 54VT-PRO-SP01 43240-26 Cable, UC5 Interface Switch Box 43250-14 Cable, UC5 Battery 2 Pin DT Fused (ECU and Signal Power) 43260-07 Cable, UC5 Interface CANBus 3 Pin DT J1939 44602-01 Box Switch UC5 Remote Hand Control 54VT-PRO-PT01 43240-26 Cable, UC5 Interface Switch Box 43250-06 Cable, UC5 Battery 2 Pigtail Fused 43260-08 Cable, UC5 Interface CANBus 4 Pin DT 44602-01 Box Switch UC5 Remote Hand Control 54VT-TB-FMX 43240-26 Cable, UC5 Interface Switch Box 43260-30 Cable, UC5 Interface DTM 4 Pin 12 inch Stub 44602-01 Box Switch UC5 Remote Hand Control 54VT-TC-X30 43240-26 Cable, UC5 Interface Switch Box 43260-08 Cable, UC5 Interface CANBus 4 Pin DT 44602-01 Box Switch UC5 Remote Hand Control 54VT-TJ-570 43240-26 Cable, UC5 Interface Switch Box 43260-21 Cable, UC5 Interface Tee Jet Matrix 570 44602-01 Box Switch UC5 Remote Hand Control UC5 Display Parts precision Spray Height Control 5

www.norac.ca UC5 Options Severe Terrain 5465BC Severe Terrain with Break-Away Brackets 5465BC-LP Severe Terrain with Low Profile Brackets UC5 Options By installing this option an operator adds a second sensor to each wing. This sensor is normally mounted half way down the length of the boom and provides additional boom protection in severe terrain. This option is helpful in any one or a combination of the following situations: Boom lengths longer than 90 ft. (27 m) Land with sharp knolls such as terraces Spraying in fall crop where there are thin or lodged areas Kit 5465BC 5465BC-LP 5465BC-JD 5465BC-JD-LP 5465BC-NT 5465BC-SM Severe Terrain Option with Break-Away Brackets (May be used with most UC5 and UC4.5 Kits) Severe Terrain Option with Low Profile Brackets (May be used with most UC5 and UC4.5 Kits) Severe Terrain Option with Break-Away Brackets (May be used with all John Deere Kits) Severe Terrain Option with Low Profile Brackets (May be used with all John Deere Kits) Severe Terrain Option with Break-Away Brackets (May be used with all Nitro Kits) Severe Terrain Option with Summers Bracket (May be used with all Summers Ultra Ultimate Sprayers) All Packages Include: Two ultrasonic sensors with two break-away brackets and all required cables & hardware. Severe Terrain Replacement Parts Item Part B10 44728 Mounting Bracket, Complete UC5 Break-Away Extended 44695-11 Nitro/Hagie Mounting Bracket, Break-Away Adapter UC5 Sensor 105415 John Deere Clamp Round 2 SS for Break-Away and Low Profile Brackets 44729 Nitro Mounting Bracket, Universal Spring Break-Away B20 44971 Bracket, Low Profile Short Flange 44734 Summers Ultra Ultimate Sensor Bracket C06 43210-10 Cable, UC5 Network 18 AWG 10M E05 43750 UC5 Ultrasonic Sensor E10 43760 UC5 Network Coupler 3-Way 6 precision Spray Height Control

UC5 Spray Height Control UC5 Options Enhanced Stability Some boom movements, such as sprayer flex, are difficult for the standard system to measure. This option adds the ability to measure more of the boom movements (roll in two places), providing a more accurate representation of boom position, therefore improving system performance. This will be most useful on trapeze booms and is only available for specific sprayer models. 5468BC UC5 Enhanced Stability Option Kit 5468BC UC5 Enhanced Stability Option* (May be used with trapeze style booms to increase boom stability) Package Includes: One roll sensor with all the required cables & hardware. * Enhanced Stability can only be used with Version 2 Roll Sensors (part number 43741). Enhanced Stability Replacement Parts Item Part C03 43220-01 Cable, UC5 Network 14 AWG 1M C04 43220-03 Cable, UC5 Network 14 AWG 3M E04 43741 UC5 Roll Sensor Version 2 E10 43760 UC5 Network Coupler 3-Way E12 43764 UC5 Network Coupler 2-Way UC5 Options precision Spray Height Control 7

www.norac.ca UC5 Options Active Roll Control for John Deere Sprayers The addition of NORAC s patented Active Roll Control to the UC5 Spray Height Control systems enable the sprayer to go over severe terrain by rolling the center section, as well as controlling wing lift and center height. Spray height is maintained, even in the most severe conditions. Rotating and controlling the center section also increases the wing lift speed. UC5 Options 5467BC-4B Active Roll Control for John Deere 4700 and 4800 Series Sprayers 5467BC-4B-JD10 Active Roll Control for John Deere 4930 and 4940 Sprayers 5467BC-JD Active Roll Control Position Sensor Upgrade Kit for John Deere Sprayers Kit 5467BC-4B Active Roll Control for John Deere 4700 and 4800 Series Sprayers. Compatible with 44963D and 44960D. Currently available for packages UC5-BC-JD07 and UC5-BC-JD08. Package Includes: Valve assembly, roll cylinder and all required cables, hoses & hardware. 5467BC-4B-JD10 Active Roll Control for John Deere 4930 and 4940 Sprayers. Compatible with 44963D and 44960D. Package Includes: Valve assembly, roll cylinder and all required cables, hoses & hardware. 5467BC-JD Active Roll Control Position Sensor Upgrade Kit for John Deere 4700 and 4800 Series Sprayers. Replaces rods with position sensor for improved measurement of the boom and eliminate the potential for rods to become misaligned in the field. Package Includes: Roll cylinder with internal sensing position sensor and all required cables & mounting brackets. 8 precision Spray Height Control

UC5 Spray Height Control UC5 Options Active Roll Control for John Deere Sprayers - Replacement Parts (Excluding Hydraulics) Note - Hydraulic Parts start on page 40 Item Part B09 45032-1 Mounting Bracket, Position Sensor V1 B10 44695-21 Pin Active Roll JD Upper Mounting Kit B25 44760 Mounting Bracket, Linear Roll JD 4920 C03 43220-03 Cable, UC5 Network 14 AWG 3 M C04 43220-01 Cable, UC5 Network 14AWG 1M C10 43230-04 Cable, UC5 Valve 2 pin DT to 2 pin DT E05 43750 UC5 Ultrasonic Sensor E06 45030 UC5 Position Sensor without Hardware E12 43764 UC5 Network Coupler 2-Way UC5 Options precision Spray Height Control 9

www.norac.ca UC5 Service Parts Service Replacement Parts Part 44645-02 Transducer Service Kit (Includes 6 transducers)* 44645-03 Sensor O-Ring Service Kit (Includes 6 silicone O-Rings)* 106285 Hydraulic Filter Element 3000PSI 10 Micron Long End Cap 45020 Ultrasonic Sensor Velcro Field Update Kit (Updates one sensor) 105739 Vibration Mount 106489 Seal, Blue Front for Molded Deutsch 6 Pin Connector * Requires a NORAC resource kit. UC5 Service Parts Kit UC5-BC-SER UC5 Spray Height Control Service Kit This kit includes common parts that NORAC recommends all dealers stock. Part Quantity 104409 Foam Disc 45 PPI Conductive 1/2 X 2-3/4 Dia 12 43210-20 Cable, UC5 Network 18 Awg 20m 1 43220-10 Cable, UC5 Network 14 Awg 10m 1 43741 UC5 Roll Sensor Version 2 1 43750 UC5 Ultrasonic Sensor 2 43760 UC5 Network Coupler 3-Way 1 43764 UC5 Network Coupler 2-Way 1 43764T UC5 Network Coupler 2-Way With Terminator (White) 2 43765 UC5 Network Coupler 8-Way 1 10 precision Spray Height Control

UC5 Spray Height Control UC5 Service Tools Kit 54645 UC4+ Resource Kit Upgrade to UC5 This kit is used to upgrade the UC4+ Spray Height Control Resource Kit (part # 44645) to calibrate and test UC5 sensors. Part Quantity 43764T UC5 Network Coupler 2-Way With Terminator (White) 1 44644-08 Cable, BUS Monitor UC5 Adapter 1 54733 NORAC Toolsuite and Verification Tool USB Drive 1 Kit 54646 UC5 Resource Kit with PEAK Bus Monitor This kit includes the tools and spare parts required for updating UC5 software and calibrating/testing UC5 sensors. Part Quantity 106127 ADH RTV 162 White Silicone - 85ml Tube 1 106359 CANbus Monitor (Peak PCAN-USB) 1 43250-12 Cable, UC5 Battery Pigtail Fused (ECU and Signal Power) 1 43764T UC5 Network Coupler 2-Way With Terminator (White) 1 44644-11 Cable, Bus Monitor Peak PCAN Tee (Male and Female DT) 1 44645-02 Transducer Service Kit 1 44645-03 O-Ring Service Kit 2 44645-04 Foam Disc Service Kit 1 44968 Ultrasonic Sensor Calibration Fixture Type 2 1 54733 NORAC Toolsuite and Verification Tool USB Drive 1 UC5 Service Tools Kit 54647 UC5 Updating and Verification Tool Kit This kit includes a PEAK CANbus monitor and the software required for using NORAC s Verification Tool which is used to ensure proper installation and settings of UC4.5 and UC5. Also enables software downloads on UC5 modules and sensors. Part Quantity 106359 PEAK PCAN-USB CANbus Monitor 1 44644-11 Cable, PEAK CANbus Monitor UC5 Interface 1 43220-0.5 Cable, UC5 Network 14AWG 0.5M 2 43250-10 Cable, UC5 Network Power Jumper 1 43760 UC5 Network Coupler 3-Way 1 43764T UC5 Network Coupler 2-Way With Terminator (White) 1 54733 NORAC Toolsuite and Verification Tool USB Drive 1 precision Spray Height Control 11

www.norac.ca UC5 Common Parts UC5 Common Parts 12 precision Spray Height Control

UC5 Spray Height Control Common Parts Item Part 43708 UC5 Mounting Bracket Kit (Control and Input Modules) 44724 Bracket, Break-Away Spacer 2 inch with Bolts B10 44728 Mounting Bracket, Complete UC5 Break-Away B11 44743 Mounting Bracket, Universal Mount B17 44972 Mounting Bracket, Low Profile Rainflap B20 44971 Mounting Bracket, Low Profile Short Flange B21 44973 Mounting Bracket, Low Profile Long Flange 44973-02 Mounting Bracket, Low Profile Large Flange Tall Clamp 44706-01 Cable Tie Kit Black 10 pcs 21 inch, 150 pcs 7.5 inch C01 43220-0.5 Cable, UC5 Network 14 AWG 0.5M (1.6 ) 43220-01 Cable, UC5 Network 14 AWG 1M (3 ) 43220-03 Cable, UC5 Network 14 AWG 3M (10 ) 43220-05 Cable, UC5 Network 14 AWG 5M (16 ) 43220-07 Cable, UC5 Network 14 AWG 7M (23 ) 43220-10 Cable, UC5 Network 14 AWG 10M (33 ) 43220-15 Cable, UC5 Network 14 AWG 15M (50 ) C02 43210-10 Cable, UC5 Network 18 AWG 10M (33 ) 43210-15 Cable, UC5 Network 18 AWG 15M (50 ) 43210-20 Cable, UC5 Network 18 AWG 20M (65 ) 43210-25 Cable, UC5 Network 18 AWG 25M (82 ) C10 43230-04 Cable, UC5 Valve 2PIN Deutsch to 2PIN Deutsch C20 43240-17 Cable, UC5 Interface Tilt Pigtail Version C21 43240-18 Cable, UC5 Interface Main Pigtail Version C30 43250-04 Cable, UC5 Battery AMP Fused 43250-06 Cable, UC5 Battery Pigtail Fused 43250-12 Cable, UC5 Battery Pigtail Fused (ECU and Signal Power) 43250-16 Cable, UC5 Battery 6 Pin DT (ECU and Signal Power) D01 43800 UC5 PULSE Display Panel (Cables Not Included) E01 43710 UC5 Controller Module E02 43720 UC5 Valve Module E03 43732 UC5 Input Module Pass Thru E04 43741 UC5 Roll Sensor Version 2 (Current Model)* 44732 Mounting Bracket, UC5 Roll Sensor 44733 Mounting Bracket, UC5 Roll Sensor Trapeze Link Plate 43740RB UC5 Roll Sensor Version 1 Rebuilt* E05 43750 UC5 Ultrasonic Sensor 104409 Foam Disc 45 PPI Conductive 101050 Nut Metric Hex SS M8 102126 Washer Lock Spring SS 5/16 IN 43750RB UC5 Ultrasonic Sensor Rebuilt UC5 Common Parts * 43740 Roll Sensors can not be paired with 43741 Roll Sensors. Refer to NORAC Technical Bulletin #11-05 for more information. precision Spray Height Control 13

www.norac.ca Common Parts Item Part E06 45035-1 UC5 Position Sensor with Standard Hardware 45030 UC5 Position Sensor without Hardware 45032-1 Mounting Bracket, Position Sensor V1 43760 UC5 Network Coupler 3-Way E11 43765 UC5 Network Coupler 8-Way E12 43764 UC5 Network Coupler 2-Way E20 43764T UC5 Network Coupler 2-Way With Terminator (White) P01 106034 UC5 Network 2 Pin Plug P02 106602 UC5 Network 12 Pin Plug (A-Key) DT P03 105882 UC5 Network 6 Pin Plug Note - Hydraulic Parts start on page 40 UC5 Common Parts 14 precision Spray Height Control

UC5 Spray Height Control UC5 Sprayer Specific Electrical Parts Kit Part Model - Apache UC5-BC-AP02 43240-10 Cable, UC5 Interface Main GP (240 inch) 43240-13 Cable, UC5 Interface Tilt GP (Weatherpack) 43250-04 Cable, UC5 Battery AMP Fused UC5-BC-AP03 43240-01 Cable, UC5 Interface Tilt DT 43240-22 Cable, UC5 Interface Main DT (240 inch) 43250-04 Cable, UC5 Battery AMP Fused Case UC5-BC-CS01 / CS02 43240-10 Cable, UC5 Interface Main GP (240 inch) 43240-13 Cable, UC5 Interface Tilt GP (Weatherpack) 43250-04 Cable, UC5 Battery AMP Fused UC5-BC-CS03 / CS05 43240-01 Cable, UC5 Interface Tilt DT 43240-22 Cable, UC5 Interface Main DT (240 inch) 43250-04 Cable, UC5 Battery AMP Fused Fast UC5-BC-FT03 43240-01 Cable, UC5 Interface Tilt DT 43240-07 Cable, UC5 Interface Main DT (with AUX 1 & 2) Flexi-Coil UC5-BC-FC02 43240-01 Cable, UC5 Interface Tilt DT 43240-07 Cable, UC5 Interface Main DT (with AUX 1 & 2) GVM UC5-BC-GV01 43240-01 Cable, UC5 Interface Tilt DT 43240-07 Cable, UC5 Interface Main DT (with AUX 1 & 2) 43250-09 Cable, UC5 Battery GP Tee Fused HARDI UC5-BC-HD03 / HD07 43240-08 Cable, UC5 Interface Tilt Amp (Superseal) 43240-09 Cable, UC5 Interface Main Amp (Superseal 240 inch W/ Bypass) UC5-BC-HD06 43240-30 Cable, UC5 Interface HARDI DAH09 UC5 Sprayer Specific Electrical precision Spray Height Control 15

www.norac.ca UC5 Sprayer Specific Electrical Kit Part Model - HARDI UC5-BC-HD08A 43240-30 Cable, UC5 Interface HARDI DAH09 43240-34 Cable, UC5 Interface HARDI DAH09 TF Adapter John Deere UC5-BC-JD06 43240-19 Cable, UC5 Interface Tilt John Deere (4920, 4930) 43240-20 Cable, UC5 Interface Main John Deere (4920, 4930) 43250-07 Cable, UC5 Battery John Deere Fused UC5-BC-JD07 / JD07A / JD08 / JD08A 43240-05 Cable, UC5 Interface Main John Deere 43240-06 Cable, UC5 Interface Tilt John Deere 43250-07 Cable, UC5 Battery John Deere Fused UC5-BC-JD10 / JD10A 43240-19 Cable, UC5 Interface Tilt John Deere (4920, 4930) 43240-20 Cable, UC5 Interface Main John Deere (4920, 4930) 43250-07 Cable, UC5 Battery John Deere Fused UC5-BC-JD11 43240-05 Cable, UC5 Interface Main John Deere 43240-06 Cable, UC5 Interface Tilt John Deere 43250-04 Cable, UC5 Battery AMP Fused UC5-BC-JD12 43240-38 Cable, UC5 Interface John Deere R4030 H038 ML 43240-41 Cable, UC5 Interface Tilt DT R4038 43250-07 Cable, UC5 Battery John Deere Fused Miller Condor UC5-BC-MC01 43240-39 Cable, UC5 Interface Main Metripack (Reversed Polarity) 43240-40 Cable, UC5 Interface Tilt Metripack (Reversed Polarity) UC5-BC-MC02 43240-13 Cable, UC5 Interface Tilt GP (Weatherpack) 43240-14 Cable, UC5 Interface Main GP (Weatherpack) Nitro UC5-BC-NT04 43240-21 Cable, UC5 Interface Main MP (Nitro) 43240-25 Cable, UC5 Interface Tilt MP (Nitro) 43250-04 Cable, UC5 Battery AMP Fused 43250-07 Cable, UC5 Battery John Deere Fused 16 precision Spray Height Control

UC5 Spray Height Control Kit Part Model - Redball UC5-BC-RB01 43240-13 Cable, UC5 Interface Tilt GP (Weatherpack) 43240-14 Cable, UC5 Interface Main GP (Weatherpack) RoGator UC5-BC-RG04 / RG05 / RG06 / RG07 43240-01 Cable, UC5 Interface Tilt DT 43240-07 Cable, UC5 Interface Main DT (with AUX 1 & 2) 43250-04 Cable, UC5 Battery AMP Fused Spra-Coupe UC5-BC-SC01 / SC02 43240-01 Cable, UC5 Interface Tilt DT 43240-07 Cable, UC5 Interface Main DT (with AUX 1 & 2) 43250-04 Cable, UC5 Battery AMP Fused Summers UC5-BC-SM02 43240-01 Cable, UC5 Interface Tilt DT 43240-07 Cable, UC5 Interface Main DT (with AUX 1 & 2) Top Air UC5-BC-TA01 43240-01 Cable, UC5 Interface Tilt DT 43240-07 Cable, UC5 Interface Main DT (with AUX 1 & 2) Versatile UC5-BC-VS01 43240-01 Cable, UC5 Interface Tilt DT 43240-07 Cable, UC5 Interface Main DT (with AUX 1 & 2) 43250-04 Cable, UC5 Battery AMP Fused UC5 Sprayer Specific Electrical precision Spray Height Control 17

www.norac.ca UC4.5 Options Main Lift Control Option This option can be added to UC4.5 Kits to provide Main Lift Height Control. Kits include Main Lift Ultrasonic Sensor, cables and brackets. UC4.5 Options 4570BC Main Lift Control Option Kit 4570BC Compatible Spray Height Control Kits: UC4.5-BC-FC1 UC4.5-BC-RG2 UC4.5-BC-FC2 UC4.5-BC-RG4 UC4.5-BC-HD1 UC4.5-BC-RG5 UC4.5-BC-HD7 UC4.5-BC-RG6 UC4.5-BC-JD6 UC4.5-BC-RG7 UC4.5-BC-MC1 UC4.5-BC-SC2 UC4.5-BC-MC2 UC4.5-BC-SM2 UC4.5-BC-MS1 UC4.5-BC-TA1 UC4.5-BC-NT3 UC4.5-BC-VS1 UC4.5-BC-NT4 4571BC Main Lift Control Option Kit 4571BC Compatible Spray Height Control Kits: UC4.5-BC-CS1 UC4.5-BC-CS2 UC4.5-BC-CS3 UC4.5-BC-GN1 UC4.5-BC-JD7 Kit 4575BC Main Lift Control Option for Fast Sprayers Main Lift Sensor Replacement Parts Item Part B11 44743 Mounting Bracket, Universal Mount B21 44973 Mounting Bracket, Low Profile Long Flange C07 43220-01 Cable, UC5 Network 14 AWG 1M E05 43750 UC5 Ultrasonic Sensor E12 43764 UC5 Network Coupler 2-Way 18 precision Spray Height Control

UC4.5 Spray Height Control UC4.5 Options Severe Terrain 5465BC Severe Terrain with Break-Away Brackets 5465BC-LP Severe Terrain with Low Profile Brackets UC4.5 Options By installing this option an operator adds a second sensor to each wing. This sensor is normally mounted half way down the length of the boom and provides additional boom protection in severe terrain. This option is helpful in any one or a combination of the following situations: Boom lengths longer than 90 ft. (27 m) Land with sharp knolls such as terraces Spraying in fall crop where there are thin or lodged areas Kit 5465BC 5465BC-LP 5465BC-JD 5465BC-JD-LP 5465BC-NT 5465BC-SM Severe Terrain Option with Break-Away Brackets (May be used with most UC5 and UC4.5 Kits) Severe Terrain Option with Low Profile Brackets (May be used with most UC5 and UC4.5 Kits) Severe Terrain Option with Break-Away Brackets (May be used with all John Deere Kits) Severe Terrain Option with Low Profile Brackets (May be used with all John Deere Kits) Severe Terrain Option with Break-Away Brackets (May be used with all Nitro Kits) Severe Terrain Option with Summers Bracket (May be used with all Summers Ultra Ultimate Sprayers) All Packages Include: Two ultrasonic sensors with two breakaway brackets and all required cables & hardware. Severe Terrain Replacement Parts Item Part B10 44728 Mounting Bracket, Complete UC5 Break-Away Extended 44695-11 Nitro/Hagie Mounting Bracket, Break-Away Adapter UC5 Sensor 105415 John Deere Clamp Round 2 inch SS for Break-Away and Low Profile Brackets 44729 Nitro Mounting Bracket, Universal Spring Break-Away B20 44971 Bracket, Low Profile Short Flange 44734 Summers Ultra Ultimate Sensor Bracket C06 43210-10 Cable, UC5 Network 18 AWG 10M E05 43750 UC5 Ultrasonic Sensor E10 43760 UC5 Network Coupler 3-Way precision Spray Height Control 19

www.norac.ca UC4.5 Options Enhanced Stability UC4.5 Options Some boom movements, such as boom flex, are difficult for the standard system to measure. This option adds the ability to measure more of the boom movements (roll in two places), providing a more accurate representation of boom position, therefore improving system performance. This will be most useful on trapeze booms and is only available for specific sprayer models. 4568BC Enhanced Stability Option Kit 4568BC UC4.5 Enhanced Stability Option* (May be used with some trapeze style booms to increase boom stability) Package Includes: One roll sensor with all the required cables & hardware. * Enhanced Stability can only be used with Version 2 Roll Sensors (part number 43741). Enhanced Stability Replacement Parts Item Part C07 43220-01 Cable, UC5 Network 14 AWG 1M C08 43220-03 Cable, UC5 Network 14 AWG 3M E04 43741 UC5 Roll Sensor Version 2 E10 43760 UC5 Network Coupler 3-Way E12 43764 UC5 Network Coupler 2-Way 20 precision Spray Height Control

UC4.5 Spray Height Control UC4.5 Options Active Roll Control for John Deere Sprayers The addition of NORAC s patented Active Roll Control to the UC4.5 Spray Height Control systems enable the sprayer to go over severe terrain by rolling the center section, as well as controlling wing lift. Spray height is maintained, even in the most severe conditions. Rotating and controlling the center section also increases the wing lift speed. UC4.5 Options 4567BC Active Roll Control for John Deere 4730 and 4830 Sprayers Kit 4567BC Active Roll Control for John Deere 4730 and 4830 Sprayers. Compatible with 44963D and 44960D. Package includes: Valve assembly, internal sensing position sensor and required cables & mounting brackets. Active Roll Control for John Deere Sprayers - Replacement Parts (Excluding Hydraulics) Note - Hydraulic Parts start on page 40 Item Part B09 45032-1 Mounting Bracket, Position Sensor V1 B10 44695-21 Pin Active Roll JD Upper Mounting Kit C04 43220-0.5 Cable, UC5 Network 14AWG 0.5M C70 44658-08D Cable, Valve Roll Bias DT E06 45030 UC5 Position Sensor without Hardware E12 43764 UC5 Network Coupler 2-Way precision Spray Height Control 21

www.norac.ca UC4.5 Service Tools Kit 45010 UC4.5 / UC4+ Spray Height Control Panel Programming Kit This kit includes the required tools and software for updating UC4.5 and UC4+ panels. Part Quantity 44649 UC4+ Panel Programmer 1 54733 NORAC Toolsuite and Verification Tool USB Drive 1 UC4.5 Service Tools Kit 64645 UC5 / UC4.5 / UC4+ Verification Tool Kit This kit includes a PEAK CANbus monitor and the software required for using NORAC s Verification Tool which is used to ensure proper installation and settings of UC5, UC4.5 and UC4+. Part Quantity 106359 PEAK PCAN-USB CANbus Monitor 1 44644-08 Cable, Bus Monitor (DT Female to AMP Male) 1 44644-11 Cable, PEAK CANbus Monitor UC5 Tee Male and Female DT 1 44644-12 Cable, Bus Monitor (DT Male to AMP Female) 1 54733 NORAC Toolsuite and Verification Tool USB Drive 1 22 precision Spray Height Control

UC4.5 Spray Height Control UC4.5 Service Tools Kit 54647 UC5 Updating and Verification Tool Kit This kit includes a PEAK CANbus monitor and the software required for using NORAC s Verification Tool which is used to ensure proper installation and settings of UC4.5 and UC5. Also enables software downloads on UC5 modules and sensors. Part Quantity 106359 PEAK PCAN-USB CANbus Monitor 1 44644-11 Cable, PEAK CANbus Monitor UC5 Tee Male and Female DT 1 43220-0.5 Cable, UC5 Network 14AWG 0.5M 2 43250-10 Cable, UC5 Network Power Jumper 1 43760 UC5 Network Coupler 3-Way 1 43764T UC5 Network Coupler 2-Way With Terminator (White) 1 54733 NORAC Toolsuite and Verification Tool USB Drive 1 UC4.5 Service Tools precision Spray Height Control 23

www.norac.ca UC4.5 Common Parts UC4.5 Common Parts Common Parts Item Part 43708 UC5 Mounting Bracket Kit (Control and Input Modules) 44724 Bracket, Break-Away Spacer 2 inch with Bolts B10 44728 Mounting Bracket, Complete UC5 Break-Away B11 44743 Mounting Bracket, Universal Mount B17 44972 Mounting Bracket, Low Profile Rainflap B20 44971 Mounting Bracket, Low Profile Short Flange B21 44973 Mounting Bracket, Low Profile Long Flange 44973-02 Mounting Bracket, Low Profile Large Flange Tall Clamp 44706-01 Cable Tie Kit Black 10 pcs 21 inch, 150 pcs 7.5 inch 24 precision Spray Height Control

UC4.5 Spray Height Control Common Parts Item Part C03 44656D Cable, Valve Variable Rate (for valve part # 44933D) 43220-0.5 Cable, UC5 Network 14 AWG 0.5M (1.6 ) 43220-01 Cable, UC5 Network 14 AWG 1M (3 ) 43220-03 Cable, UC5 Network 14 AWG 3M (10 ) 43220-05 Cable, UC5 Network 14 AWG 5M (16 ) 43220-07 Cable, UC5 Network 14 AWG 7M (23 ) 43220-10 Cable, UC5 Network 14 AWG 10M (33 ) 43220-15 Cable, UC5 Network 14 AWG 15M (50 ) C05 43210-10 Cable, UC5 Network 18 AWG 10M (33 ) 43210-15 Cable, UC5 Network 18 AWG 15M (50 ) 43210-20 Cable, UC5 Network 18 AWG 20M (65 ) 43210-25 Cable, UC5 Network 18 AWG 25M (82 ) C10 44650-50 Cable, UC4.5 Power Generic Self-Propelled 44650-51 Cable, UC4.5 Power Generic Pull Type C11 44651-50 Cable, Generic Valve Extension C12 44658-35 Cable, UC4+ Interface Generic C13 44658-36 Cable, UC4+ Interface Wings Generic C30 43250-04 Cable, UC5 Battery AMP Fused 43250-06 Cable, UC5 Battery Pigtail Version Fused E01 45100 UC4.5 Spray Boom Control Panel E03 43742 UC5 Roll Sensor with Temperature Probe E04 43741 UC5 Roll Sensor Version 2 (Current Model)* 44732 Mounting Bracket, UC5 Roll Sensor 44733 Mounting Bracket, UC5 Roll Sensor Trapeze Link Plate E05 43750 UC5 Ultrasonic Sensor 104409 Foam Disc 45 PPI Conductive 101050 Nut Metric Hex SS M8 102126 Washer Lock Spring SS 5/16 IN 43750RB UC5 Ultrasonic Sensor Rebuilt 45035-1 UC5 Position Sensor with Standard Hardware 45030 UC5 Position Sensor without Hardware 45032-1 Mounting Bracket,Position Sensor V1 E10 43760 UC5 Network Coupler 3-Way E11 43765 UC5 Network Coupler 8-Way E12 43764 UC5 Network Coupler 2-Way E20 43764T UC5 Network Coupler 2-Way With Terminator (White) P03 105882 Connector 6 Pin Molded Plug UC4.5 Common Parts Note - Hydraulic Parts start on page 40 precision Spray Height Control 25

www.norac.ca UC4.5 Sprayer Specific Electrical Parts UC4.5 Sprayer Specific Electrical Kit Part Model - Apache UC4.5-BC-AP3 44658-90 Cable, UC4+ Sense AP3 44658-91 Cable, UC4+ Valve AP3 Main Case UC4.5-BC-CS1 44658-21 Cable, UC4+ Interface GP All 44658-40 Cable, UC4+ Interface GP Main Extension UC4.5-BC-CS2 44658-21 Cable, UC4+ Interface GP All 44658-34 Cable, UC4+ Interface Bypass RoGator 854 98 and Older 44658-40 Cable, UC4+ Interface GP Main Extension 43250-04 Cable, UC5 Battery AMP Fused UC4.5-BC-CS3 43250-04 Cable, UC5 Battery AMP Fused 44658-24 Cable, UC4+ Interface Power Pigtail 44658-47 Cable, UC4+ Interface DT2 Main Extension 44658-72 Cable, UC4+ Interface Roll Sense DT UC4.5-BC-CS5 43250-04 Cable, UC5 Battery AMP Fused 44658-24 Cable, UC4+ Interface Power Pigtail 44658-46D Cable, UC4+ Valve Roll with Pigtail 44658-47 Cable, UC4+ Interface DT2 Main Extension 44658-62 Cable, UC4+ Interface Valve CS4 44658-72 Cable, UC4+ Interface Roll Sense DT Flexi-Coil UC4.5-BC-FC1 44650-53 Cable, UC4.5 Power for Flexi-Coil 67 Series 44653-10 Cable, UC4.5 Adapter Molex to Deutsch UC4.5-BC-FC2 44658-24 Cable, UC4+ Interface Power Pigtail 44658-27 Cable, UC4+ Interface DT2 GND2 Bypass HARDI UC4.5-BC-HD7 44658-42 Cable, UC4+ Interface AMP ML Only 44658-60 Cable, UC4+ Interface Bypass AMP Superseal John Deere UC4.5-BC-JD7 44650-57 Cable, UC4.5 Power John Deere 44653-10 Cable, UC4+ Adapter Molex to Deutsch 44658-01 Cable, UC4+ Valve John Deere UC4.5-BC-JD8 43250-07 Cable, UC5 Battery John Deere Fused 44658-54 Cable, UC4+ Interface RMAN/Bypass 26 precision Spray Height Control

UC4.5 Spray Height Control Kit Part Model - John Deere UC4.5-BC-JD8A 43250-07 Cable, UC5 Battery John Deere Fused 44658-45D Cable, UC4+ Valve Main DT 44658-46D Cable, UC4+ Valve BC C5 Roll with Pigtail 44658-54 Cable, UC4+ Interface RMAN/Bypass 45101 UC4.5 Boom Control Panel One Switch MS UC4.5-BC-MS1 44658-19 Cable, UC4+ Interface FT1 Main 44658-20 Cable, UC4+ Interface FT1 Wings Nitro UC4.5-BC-NT3 44650-58 Cable, UC4.5 Power Nitro 44653-10 Cable, UC4.5 Adapter Molex to Deutsch 44688 Cable, Valve Disconnect Extension 4 Foot UC4.5-BC-NT4 43250-04 Cable, UC5 Battery AMP Fused 43250-07 Cable, UC5+ Battery John Deere Fused 44651-52 Cable, UC4.5 Valve Extension Nitro 4000 Series Rau UC4.5-BC-RA1 / RA2 44658-58 Cable, UC4+ Interface Rau I/O 1 44658-59 Cable, UC4+ Interface Rau I/O 2 RA1 Only 44658-61 Cable, UC4+ Interface Rau Bypass RoGator UC4.5-BC-RG2 / RG6 43250-04 Cable, UC5 Battery AMP Fused 44658-24 Cable, UC4+ Interface Power Pigtail UC4.5-BC-RG4 43250-04 Cable, UC5 Battery AMP Fused 44658-32 Cable, UC4+ Interface RoGator 854, 1054, 1254 (RG4) 44658-33 Cable, UC4+ Interface MP2 GND2 Bypass Summers UC4.5-BC-SM2 44658-69 Cable, UC4+ Interface Roll DT 44658-70 Cable, UC4+ Interface Remote Manual DT Top Air UC4.5-BC-TA1 44658-74 Cable, UC4+ Interface Deutsch Bypass 44658-97 Cable, UC4+ Interface DT06-2X GND2 - Diode Versatile UC4.5-BC-VS1 43250-04 Cable, UC5 Battery AMP Fused 44658-24 Cable, UC4+ Interface Power Pigtail UC4.5 Sprayer Specific Electrical precision Spray Height Control 27

www.norac.ca UC4+ - Discontinued UC4+ Spray Height Control kits have been discontinued and replaced by UC4.5 kits. UC4+ options and spare parts will continue to be available. 28 precision Spray Height Control

UC4+ Spray Height Control UC4+ Options Severe Terrain UC4+ Options 4465BC+ Severe Terrain with Break-Away Brackets 4465BC+LP Severe Terrain with Low Profile Brackets By installing this option an operator adds a second sensor to each wing. This sensor is normally mounted half way down length of the boom and provides average height for each boom, as well as a minimum height override. This option is helpful in any one or a combination of the following situations: Boom lengths longer than 90 ft. (27 m) Land with sharp knolls such as terraces Spraying in fall crop where there are thin or lodged areas Kit 4465BC+ Severe Terrain Option with Break-Away Brackets (May be used with all UC4-BC and UC4+BC kits) 4465BC+LP Severe Terrain Option with Low Profile Brackets (May be used with all Case Kits and Generic Kits) 4465BC+HG Severe Terrain Option with Break-Away Brackets (May be used with all Hagie Kits) 4465BC+JD Severe Terrain Option with Break-Away Brackets (May be used with all John Deere Kits) 4465BC+JD-LP Severe Terrain Option with Low Profile Brackets (May be used with all John Deere Kits) 4465BC+NT Severe Terrain Option with Break-Away Brackets (May be used with all Nitro Kits) All Packages Include: Two ultrasonic sensors with two breakaway brackets and all required cables & hardware. Severe Terrain Replacement Parts Item Part B13 44728 Mounting Bracket, Complete UC4+ Break-Away Extended 44695-11 Mounting Bracket, Break-Away Adapter UC4+ Sensor (for Nitro or Hagie) 105415 Clamp Round 2 inch SS for Break-Away and Low Profile Brackets (for John Deere) 44729 Nitro Mounting Bracket, Universal Spring Break-Away B20 44971 Mounting Bracket, Low Profile Short Flange C02B 44669 Cable, UC4+ Severe Terrain 4 th and 5 th Sensor Cable E02 44631 UC4+ Ultrasonic Sensor precision Spray Height Control 29

www.norac.ca UC4+ Options UC4+ Options Enhanced Stability Some boom movements, such as boom flex, are difficult for the standard system to measure. This option adds the ability to measure more of the boom movements (roll in two places), providing a more accurate representation of boom position, therefore improving system performance. This will be most useful on trapeze booms and is only available for specific sprayer models. 4468BC+ UC4+ Enhanced Stability Option Kit 4468BC+ UC4+ Enhanced Stability* (May be used with trapeze style booms to increase boom stability. Requires Version 7 & higher software.) Package Includes: One roll sensor with all the required cables & hardware. * Enhanced Stability can only be used with Version 2 Roll Sensors (part numbers 45000 and 45001). Enhanced Stability Replacement Parts Item Part C01 44674 Cable, UC4+ Sensor Roll Bias E01 45001 UC4+ Roll Sensor Version 2 Main Lift Sensor This option can be added to Active Roll Control with only one ultrasonic sensor on the center section to provide a more accurate representation of boom position, therefore improving system performance. 4470BC+ UC4+ Main Lift Sensor Kit 4470BC+ UC4+ Main Lift Sensor (Used for Active Roll Control systems) Package Includes: One sensor with all the required cables & hardware. Main Lift Sensor Replacement Parts Item Part B13 44743 Mounting Bracket, Universal Mount C71 44674 Cable, UC4+ Sensor Roll Bias E02 44631 UC4+ Ultrasound Sensor 30 precision Spray Height Control

UC4+ Spray Height Control UC4+ Options Active Roll Control for John Deere Sprayers The addition of NORAC s patented Active Roll Control to the UC4+ Spray Height Control systems enable the sprayer to go over severe terrain by rolling the center section, as well as controlling wing lift. Spray height is maintained, even in the most severe conditions. Rotating and controlling the center section also increases the wing lift speed. UC4+ Options 4467BC+4B Active Roll Control for John Deere Sprayers. Kit 4467BC+4B Active Roll Control for John Deere Sprayers (Current Model) - single station valve with 4 mounting bolts and compatible with 44963D and 44960D. Currently available for packages UC4+BC+JD7 and UC4+BC+JD8. Package Includes: Valve assembly, roll cylinder and all required cables, hoses & hardware. Active Roll Control for John Deere Sprayers - Replacement Parts (Excluding Hydraulics) Note - Hydraulic Parts start on page 40 Item Part B09 44695-10 Bracket Sprayer Frame Target Roll Bias Cylinder B11 44740 Mounting Bracket, Universal Mount B12 44741 Mounting Bracket, Roll Sensor Target UC4+ C70 44658-08D Cable, Valve Roll Bias DT C71 44674 Cable, UC4+ Sensor Roll Bias E02 44631 UC4+ Ultrasonic Sensor 44695-18 Pin Active Roll Cylinder Upper JD 20MM Zinc UC4+ Upgrade Package Kit 4473BC UC4+ Roll Sensor Upgrade From UC4 (Package Includes: Two roll sensors & cable) NOTE: For upgrade packages, the customer must return the Control Panel and all system sensors to NORAC Service. Price includes programming and testing of components but does not include repairs to components that are not returned in operating condition. Additional charges may apply to the UC3 system after inspection of components. precision Spray Height Control 31

www.norac.ca UC4+ Service Parts Service Replacement Parts UC4+ Service Parts Part 44645-02 Transducer Service Kit (Includes 6 transducers) 44645-03 Sensor O-Ring Service Kit (includes 6 silicone O-Rings) 106285 Hydraulic Filter Element 3000PSI 10 Micron Long End Cap 45020 Ultrasonic Sensor Velcro Field Update Kit (Updates one sensor) 105739 Vibration Mount Kit UC4+BC+SER UC4+ Spray Height Control Service Kit This kit includes common parts that NORAC recommends all dealers stock. Part Quantity 104409 Foam Disc 45 PPI Conductive 1/2 X 2-3/4 Dia 12 44631 UC4+ Ultrasonic Sensor 2 44664 Cable, UC4+ Can Node Dual 5 1 44668 Cable, UC4+ Sensor Branch 1 Amp Recept 3 Amp Plug BC 1 45000 UC4+ Plus Roll Sensor with Temperature Probe Version 2 1 45001 UC4+ Plus Roll Sensor Version 2 1 32 precision Spray Height Control

UC4+ Spray Height Control UC4+ Service Tools Kit 45010 UC4+ Spray Height Control Panel Programming Kit This kit includes the required tools and software for updating UC4+ panels. Part Quantity Kit 44649 UC4+ Panel Programmer 1 54733 NORAC Toolsuite and Verification Tool USB Drive 1 44645 UC4+ Spray Height Control Resource Kit This kit includes the tools and spare parts required for updating UC4+ panels and calibrating/testing UC4+ sensors. Part Quantity 106127 ADH RTV 162 White Silicone - 85ml Tube 1 44644 CANbus Monitor 1 44644-04 Cable, Busmonitor Power Stand-Alone Device 1 44645-02 Transducer Service Kit 1 44645-03 O-Ring Service Kit 2 44645-04 Foam Disc Service Kit 1 54733 NORAC Toolsuite and Verification Tool USB Drive 1 44968 Ultrasonic Sensor Calibration Fixture Type 2 1 UC4+ Service Tools Part 44644 CANbus Monitor Used with NORAC software for monitoring CANbus communication and programming UC4+ panels. Kit 64645 UC5 / UC4.5 / UC4+ Verification Tool Kit This kit includes a PEAK CANbus monitor and the software required for using NORAC s Verification Tool which is used to ensure proper installation and settings of UC5, UC4.5 and UC4+. Part Quantity 106359 PEAK PCAN-USB CANbus Monitor 1 44644-08 Cable, Bus Monitor (DT Female to AMP Male) 1 44644-11 Cable, PEAK CANbus Monitor UC5 Tee Male and Female 1 44644-12 Cable, Bus Monitor (DT Male to AMP Female) 1 54733 NORAC Toolsuite and Verification Tool USB Drive 1 precision Spray Height Control 33

www.norac.ca UC4+ Common Parts UC4+ Common Parts 34 precision Spray Height Control

UC4+ Spray Height Control Common Parts Item Part B11 44743 Mounting Bracket, Universal Mount B13 44728 Mounting Bracket, Complete UC4+ Break-Away 44724 Bracket, Break-Away Spacer 2 inch with Bolts B17 44972 Sensor Mounting Bracket Low Profile Rainflap B20 44971 Sensor Mounting Bracket Low Profile Short Flange B21 44973 Sensor Mounting Bracket Low Profile Long Flange 44706-01 Cable Tie Black 10 pcs 21 inch, 150 pcs 7.5 inch C02 44668 Cable, UC3 Sensor Branch 1 AMP Recept 3 AMP Plug BC C02B 44664 Cable, UC4+ Can Node Dual 5 44662B-40 Cable, UC3 Sensor Trunk To AMPF - 40 Long 44669 Cable, UC4+ Severe Terrain 4th and 5th Sensor Cable 44672TB-3 Cable, UC4+ Sensor AMPF to Pigtail w/termination Resistor Black Standard 3 C03 44656 Cable, Valve Variable Rate (for valve part # 44933S) 44656D Cable, Valve Variable Rate (for valve part # 44963D) C10 44650-35 Cable, Power Generic Pull-Type 44650-39 Cable, Power Generic Self-Propelled C11 44651-03 Cable, Generic Valve Extension (input/output) 44651 Cable, Valve Extension (output only) C12 44658-35 Cable, Interface UC4+ Generic C13 44658-36 Cable, Interface Wings UC4+ Generic 44658-38 Cable, Interface UC4+ DIN All 44658-39 Cable, Interface UC4+ DIN 44658-49 Cable, Valve UC4+ Roll Pigtail C14 44658-28 Cable, Interface UC4+ Power Pigtail E01 4461BC+ UC4+ Sprayer Boom Control Panel 105421 UC4+ Mount Modular Flex Black E02 44631 UC4+ Ultrasound Sensor 104409 Foam Disc, 1/2 inch x 2 5/8 inch 101050 Metric Nut 8 mm 102126 Metric Lock Washer 8 mm 105739 Vibration Mount DIA 30MMx30MMx8MM Thread Custom 44631RB UC4+ Ultrasound Sensor Rebuilt E03 44641 UC4+ Roll Sensor With Temperature Probe Version 1 (Previous Model)* 44641RB UC4+ Roll Sensor With Temperature Probe Version 1 Rebuilt 45000 UC4+ Roll Sensor With Temperature Probe Version 2 (Current Model)* 45000RB UC4+ Roll Sensor With Temperature Probe Version 2 Rebuilt E04 44642 UC4+ Roll Sensor Version 1 (Previous Model)* 44642RB UC4+ Roll Sensor Version 1 Rebuilt 45001 UC4+ Roll Sensor Version 2 (Current Model)* 44732 Mounting Bracket, UC4+ Roll Sensor 44733 Mounting Bracket, UC4+ Roll Sensor Trapeze Link Plate 45001RB UC4+ Roll Sensor Version 2 Rebuilt UC4+ Common Parts * 44641 and 44642 Roll Sensors can not be paired with 45000 and 45001 Roll Sensors. Refer to NORAC Technical Bulletin #11-05 for more information. Note - Hydraulic Parts start on page 40 precision Spray Height Control 35

www.norac.ca UC4+ Sprayer Specific Electrical Parts UC4+ Sprayer Specific Electrical Kit Part Model - Generic Kit UC4+BC+AN2 44658-31 Cable, UC4+ Interface Hand Control Pigtail 44658-37 Cable, UC4+ Interface Main Generic Apache UC4+BC+AP1 44650-12 Cable, Power CASE IH 4260 44658-07 Cable, UC4+ Interface Pigtail to Shroud 44674 Cable, UC4+ Sensor Roll Bias UC4+BC+AP2 44658-17 Cable, UC4+ Sense AP2 44658-18 Cable, UC4+ Valve AP2 Main 44658-99 Cable, UC4+ Power Pigtail Fused 44674 Cable, UC4+ Sensor Roll Bias UC4+BC+AP3 44658-90 Cable, UC4+ Sense AP3 44658-91 Cable, UC4+ Valve AP3 Main 44658-99 Cable, UC4 Power Pigtail Fused 44674 Cable, UC4+ Sensor Roll Bias Case UC4+BC+CS1 44658-21 Cable, UC4+ Interface GP All 44658-40 Cable, UC4+ Interface GP Main Extension UC4+BC+CS2 44658-21 Cable, UC4+ Interface GP All 44658-34 Cable, Interface Bypass Rogator 854 98 and Older 44658-40 Cable, UC4+ Interface GP Main Extension UC4+BC+CS3 44658-24 Cable, UC4+ Interface DT06-2X GND2 44658-47 Cable, UC4+ Interface DT2 Main Extension 44658-72 Cable, UC4+ Interface Roll Sense DT UC4+BC+CS5 44658-24 Cable, UC4+ Interface DT06-2X GND2 44658-46D Cable, Valve DT Roll With Pigtail 44658-47 Cable, UC4+ Interface DT2 Main Extension 44658-62 Cable, UC4+ Interface Valve CS4 44658-72 Cable, UC4+ Interface Roll Sense DT 44674 Cable, UC4+ Sensor Roll Bias Case UC4+CS4-4B 44658-46D Cable, Valve DT Roll With Pigtail 44658-62 Cable, UC4+ Interface Valve CS4 36 precision Spray Height Control

UC4+ Spray Height Control Kit Part Model - Flexi-Coil UC4+BC+FC1 44650-09 Cable, Power Flexi-Coil 67 series 44687 Cable, Sensor Trunk PT Extension AMPM to AMPF Black 14 UC4+BC+FC2 44658-24 Cable, UC4+ Interface DT06-2X GND2 44658-27 Cable, UC4+ Interface DT2 GND2 Bypass 44658-29 Cable, UC4+ Interface Power AMP Tee Gregson UC4+BC+GM1 44650-11 Cable, Power Gregson Maverick GVM UC4+BC+GV1 44658-24 Cable, UC4+ Interface DT06-2X GND2 44658-71 Cable, UC4+ Interface Power GP Tee 44658-72 Cable, UC4+ Interface Roll Sense DT 44674 Cable, UC4+ Sensor Roll Bias HARDI UC4+BC+HD1 44650-32 Cable, UC4+ Power HARDI 44687 Cable, UC4+ Sensor Trunk PT Extension AMPM to AMPF Black 14 UC4+BC+HD3 / HD7 44658-42 Cable, UC4+ Interface AMP ML Only 44658-49 Cable, UC4+ Valve Roll Pigtail 44658-60 Cable, UC4+ Interface Bypass AMP Superseal UC4+BC+HD4 44658-50 Cable, UC4+ Interface Extension HARDI 44658-51 Cable, UC4+ Interface HARDI 44658-52 Cable, UC4+ Power HARDI 44658-78 Cable, UC4+ Interface HARDI DAH09 UC4+ Sprayer Specific Electrical precision Spray Height Control 37

www.norac.ca UC4+ Sprayer Specific Electrical Kit Part Model - John Deere UC4+BC+JD6 44650-14 Cable, Power John Deere 44658-10 Cable, UC4+ Valve BC JD4920 UC4+BC+JD7 44650-14 Cable, Power John Deere 44658-01 Cable, UC4+ Valve BC JD UC4+BC+JD7A 44650-14 Cable, Power John Deere 44658-01 Cable, UC4+ Valve BC JD 44658-08D Cable, UC4+ Valve Roll Bias DT 44674 Cable, UC4+ Sensor Roll Bias UC4+BC+JD8 / JD10 44658-30 Cable, UC4+ Interface Power JD 44658-45D Cable, UC4+ Valve Main DT 44658-54 Cable, UC4+ Interface RMAN/Bypass UC4+BC+JD8A 44658-30 Cable, UC4+ Interface Power JD 44658-45D Cable, UC4+ Valve Main DT 44658-46D Cable, Valve Roll With Pigtail 44658-54 Cable, UC4+ Interface RMAN/Bypass 44602-01 Box Switch UC5 Remote Hand Control 44674 Cable, UC4+ Sensor Roll Bias UC4+BC+JD11 44658-45D Cable, UC4+ Valve Main DT 44658-87 Cable, UC4+ Interface RM JD 4630 UC4+JD9-4B 44658-45D Cable, UC4+ Valve Main DT Miller Condor UC4+BC+MC1 44658-89 Cable, UC4+ Interface GP Reversed Polarity 44674 Cable, UC4+ Sensor Roll Bias UC4+BC+MC2 44658-21 Cable, UC4+ Interface GP All 44674 Cable, UC4+ Sensor Roll Bias 38 precision Spray Height Control

UC4+ Spray Height Control Kit Part Model - Nitro UC4+BC+NT3 44650-22 Cable, Power Nitro 44687 Cable, Sensor Trunk PT Extensions AMPM to AMPG 14 44688 Cable, Valve Disconnect Extension 4 UC4+BC+NT4 44658-30 Cable, UC4+ Interface Power JD 44658-55 Cable, Extension Nitro 4000 Series 44658-56 Cable, Valve Extension Nitro 4000 Series 44687 Cable, Sensor Trunk PT Extensions AMPM to AMPG 14 Redball UC4+BC+ RB1 44658-22 Cable, UC4+ Interface RB1 Main 44658-23 Cable, UC4+ Interface RB1 Wings RoGator UC4+BC+RG2 44658-24 Cable, UC4+ Interface DT06-2X GND2 UC4+BC+RG4 44658-32 Cable, UC4+ Interface Rogator 854,1054,1254 (RG4) 44658-33 Cable, UC4+ Interface MP2 GND2 Bypass 44658-41 Cable, UC4+ Interface Hand Control RG4 UC4+BC+RG5 / RG6 / RG7 44658-24 Cable, UC4+ Interface DT06-2X GND2 Spra-Coupe UC4+BC+SC1 / SC2 44650-38 Cable, UC4+ Power Spra-Coupe 7000 Series 44658-15 Cable, UC4+ Interface Valve Bypass Spra-Coupe 7000 Series UC4+BC+SC4 44658-93 Cable, UC4+ Interface Spra-Coupe Top-Air UC4+BC+TA1 44658-74 Cable, UC4+ Interface Deutsch ByPass 44658-97 Cable, UC4+ Interface DT06-2X GND2 - Diode Willmar UC4+BC+WR1 44650-06 Cable, Power Willmar 8100 UC4+BC+WR2 44650-20 Cable, Power Willmar 8400 UC4+ Sprayer Specific Electrical precision Spray Height Control 39

www.norac.ca Current Hydraulic Parts Hydraulic Parts - Current Models Part s 44963D, 44960D & 44962D NORAC Proportional Valves are used in both the UC5, UC4.5 and UC4+ product lines. This valve was changed in 2011 to include: Redesigned filter cap A & B ports were reversed to accommodate internal design changes Move from 3-bolt pattern to a 4-bolt pattern for the additional of expansion models 44963D Proportional Valve Block 40 precision Spray Height Control

Hydraulic Components (UC5, UC4.5 and UC4+ ) Hydraulic Parts - 44963D, 44960D & 44962D Item Part 44963D 44960D 44962D Valve Package 2-Station Closed Center Proportional Expandable (Deutsch Connectors) Valve Package 3-Station Closed Center Proportional Expandable (Deutsch Connectors) Expansion Valve Closed or Open Center Proportional DPOC (Deutsch Connectors) 1 106282 Hex Socket Capscrew NC 3/8x1-1/4 Clear Chrome 2 106203 Filter Cap 4 Bolt with #6 ORB Port 3 106284 Seal Quad Ring for Filter Cap 4 106285 Hydraulic Filter Element 3000PSI 10 Micron Long End Cap 5 106329 Plug #4 SAE Zero-Leak 6 44896 Insert Valve Block Filter Rev B 7 104998 O-Ring 5/8 OD X.420 ID X.103 8 106076 Hydraulic Check Valve C-8-2 with Poly Seal 44-SKC82 Seal Kit for 8-2 Cartridge Teflon Ring, NBR Boss, Poly O-Ring 10 106281 Hydraulic Check Valve Pilot Operated C-8-3 44-SKC83 Seal Kit for 8-3 Cartridge Teflon Rings, NBR Boss, Poly O-Rings 11 106065 Hydraulic Check Valve Dual Pilot Operated C-8-4 44-SKC84 Seal Kit for 8-4 Cartridge Teflon Rings, NBR Boss, Poly O-Rings 12 102706 O-Ring Square Valve D05 12.42 x 1.68 NBR70 13 Hydraulic Fittings for NORAC Block - See Page 47 14 Hydraulic Orifices - See Page 47 16 44956 Orifice Screw-in 0.016-1/4-20x3/8 (Can be replaced with part #105500, see item #26) 17 106328 Plug #2 SAE Zero-Leak 18 100739 Hex Socket Capscrew 10-24 x 2 Stainless Steel 19 106063 Hydraulic Solenoid Valve 12V CC Proportional Deutsch Connector 20 106118 O-Ring Solenoid Body Seal (Viton 22mm ID X 1.5mm) 21 106080 Coil 12V for Proportional Hydraulic Valve NORAC P/N 106063 22 105948 Coil Nut and O-Ring for NORAC P/N 106063, 105723, 105599 23 102705 O-Ring for D03 Square 24 104943 Hydraulic Check Valve C-10-2 44-SKC102 Seal Kit for 10-2 Cartridge Teflon Ring, NBR Boss, Poly O-Ring 25 106328 Plug #2 SAE Zero-Leak 26 105500 Setscrew Plug NC 1/4 x 3/8 Stainless Steel 29 44700-06 Valve Mounting Kit Replacement Manifolds 15 44969 Valve Assembly Expansion 4 Bolt NO Solenoids 9 44970 Valve Assembly 2-Station CC/LS 4 Bolt NO Solenoids 9 44974 Valve Assembly 3-Station CC/LS 4 Bolt NO Solenoids Current Hydraulic Parts precision Spray Height Control 41

www.norac.ca Hydraulic Parts - Discontinued Part s 44933D & 44952D 44933D Proportional Valve Block Discontinued Hydraulic Parts 42 precision Spray Height Control