DISTRIBUTOR NET PRICE LIST DS108-6 Effective July 6, 1998 Supersedes DS107-6 Dated January 6, 1997 CLUTCHES (Standard & Coaxial) FACTORY DIRECT PROGRAM All prices are subject to change without notice. No local taxes are included. The mailing of this Price List to you does not constitute an Offer to sell. INDEX PAGE Ordering Guidelines... 2 Core Allowance & Procedures (New Clutches)... 3 Core Allowance & Procedures (Reman Clutches)... 4 Core Credit Allowance and Component Value Breakdown... 5 Core Return Procedures... 5 Program Code and Weight Factors... 6 14" Easy-Pedal... 7 15 1/2" Easy-Pedal... 7 Clutch Brakes, Drive Pin, Lube Tube... 7 14" Stamped Angle-Spring... 8 14" Solo... 8 350 MM Angle-Ring... 8 330 MM Angle-Ring... 8 310 MM Angle-Ring... 8 Eaton Spicer Remanufactured 14" Angle-Spring... 9 Eaton Spicer Remanufactured 14" Easy Pedal... 9 Eaton Spicer Remanufactured 14" Stamped Angle-Spring... 9 Eaton Spicer Remanufactured 15 1/2" Angle-Spring... 10 Eaton Spicer Remanufactured 15 1/2" Easy Pedal... 10 DRIVETRAIN Remanufactured 14" Angle-Spring... 11 DRIVETRAIN Remanufactured 14" Stamped Angle-Spring... 11 DRIVETRAIN Remanufactured 15 1/2" Angle-Spring... 11 Factory Direct Supersession List... 12 1998 DANA CORPORATION Printed in U.S.A.
Ordering When ordering, releases for all product (new and remanufactured) may be sent or phoned in to our central order point for clutches in Richmond, Indiana. Please reference the appropriate purchase order number. The address for this facility is: Dana Corporation Drivetrain Service Division P.O. Box 1345 Richmond, IN 47375 Phone: (800) 621-8084 or (765) 973-6050 FAX: (800) 332-6124 or (765) 973-6124 Ordering Guidelines A. Quantities: (24): The minimum order is 24 clutch installations of new and/or remanufactured product. If your 24 piece order is a mix of new installations and remanufactured installations to achieve the 24 piece minimum quantity, your order must contain a minimum of eight (8) remanufactured installations and a minimum of eight (8) new installations. Brakes are to be ordered in multiples of 5, drive pins in multiples of 6, and lube tubes in a 30 piece pack. (36): You may also order clutches in 36 and up quantities to receive the best price. If your 36 piece order is a mix of new installations and remanufactured installations to achieve the 36 piece minimum quantity, your order must contain a minimum of eight (8) remanufactured installations and a minimum of eight (8) new installations. Brakes are to be ordered in multiples of 5, drive pins in multiples of 6, and lube tubes in a 30 piece pack. B. Clutch brakes, drive pins, and lube tubes are included in the program, but cannot be used to meet the minimum requirements. C. Each individual order new, reman, or combined product to be shipped to one location only. D. Each installation shipped will be individually boxed. E. Terms are 2% 15th. Prox./Net 30. F. Freight will be prepaid. (Prepaid shipments are made within the Continental United States only. Alaska, Hawaii, and U.S. Territorial Possessions are prepaid to port; collect from port to destination. Special requests to ship via air, UPS, bus, etc. will be shipped prepaid and shipping charges will be added to the invoice.) G. Delivery: We will ship all factory direct orders of new and/or remanufactured products within 2 weeks from receipt of order. This is a shipping time, not delivery time. H. Orders for 23 or smaller quantities of new and reman clutches will be shipped at the prices listed in the latest issue of our HEAVY DUTY CLUTCH PARTS & ASSEMBLIES price list. These orders will be combined with others for products normally purchased from Richmond and are subject to the ordering guidelines of Spicer products normally purchased from Richmond. DS108-6 2
Core Allowance & Procedures (New Clutches) Eaton Clutch will credit warehouse distributors $25.00 for a 14" cast Angle-Spring, Easy-Pedal, or Solo clutch core, or $15.00 for a 14" cast Meritor clutch core. They will credit warehouse distributors $80.00 for a 15 1/2" cast Angle-Spring, Easy-Pedal, Solo or cast Meritor clutch core, providing the following conditions are met: 1) New Angle-Spring, Easy-Pedal, or Solo clutches have been purchased; 2) All clutch core shipments under 1,000 lbs. must be shipped freight prepaid. All clutch core shipments over 1,000 lbs. can be shipped freight collect. Freight collect shipments must be shipped via Eaton approved carriers. Collect shipments on any other carriers will not be accepted. For approved carrier listing, see the attachment to the core form and/or call a remanufacturing facility. 3) Core returns must be approved by one of our core return centers, and they must be the Eaton Spicer Angle- Spring, Easy-Pedal, Solo, or the Meritor design; other manufacturers' products are not acceptable. 4) Credit will be issued strictly on our acceptance. We reserve the right to refuse any cores that are not in reusable condition. Disposition of material is to be indicated on the core return form. If rejected material is to be returned, we will ship it freight collect to your location. 5) Partial credit may be given, depending on the condition of the complete core assembly. NOTE: SEE CORE RETURN PROCEDURES ON PAGE 5. 3 DS108-6
Core Allowance & Procedures (Reman Clutches) Eaton Clutch will credit warehouse distributors the following amounts for reman core credit: 14" Eaton Spicer Angle-Spring, Easy-Pedal, Solo, or Meritor $50 15 1/2" Eaton Spicer Angle-Spring, Easy-Pedal, Solo, or Meritor $120 Eaton Clutch will issue credit as indicated above providing the following conditions are met: 1) Angle-Spring or Easy-Pedal clutches remanufactured by Eaton have been purchased. 2) 14" and 15 1/2" clutch core credits will be issued in equal quantities up to and not to exceed the quantity purchased. 3) Size and type of clutch cores must match the size and type of clutches that were ordered. 4) Core returns must be approved by one of our core return centers, and they must be Eaton Spicer Angle- Spring, Easy-Pedal, Solo, or Meritor cores; other products are not acceptable. 5) Cores must be returned within 180 days of the original remanufactured clutch purchase. Cores submitted in excess of purchases will be held 90 days for credit against future purchases, after which they will be purchased by Eaton Corporation at "New Clutch" core allowance prices. 6) Credit will be issued strictly on our acceptance. We reserve the right to refuse any cores that are not in reusable condition. Disposition of material is to be indicated on the core return form. If rejected material is requested to be returned, we will return it freight collect to your location. 7) All clutch core shipments under 1,000 lbs. must be shipped freight prepaid. All clutch core shipments over 1000 lbs. can be shipped freight collect. Freight collect shipments must be shipped via Eaton approved carriers. Collect shipments on any other carriers will not be accepted. For approved carrier listing, see the attachment to the core form and/or call a remanufacturing facility. 8) Returns must be boxed and/or strapped securely to pallets. Cores packaged in barrels, drums, or sacks WILL NOT BE ACCEPTED. CORE WEIGHTS (CAST) Description 14" 15 1/2" Complete Kits 108 lbs. 141 lbs. Cover Assembly 60 lbs. 86 lbs. Intermediate Plate 26 lbs. 27 lbs. Driven Disc (each) 11 lbs. 14 lbs. CORE WEIGHTS (STAMPED) Description 14" Complete Kits (Single Plate) Complete Kits (2-Plate) Cover Assembly Only Intermediate Plate Assembly Driven Disc (each) 66 lbs. 100 lbs. 56 lbs. 24 lbs. 10 lbs. NOTE: ALL WEIGHTS ARE APPROXIMATE AND MAY VARY WITH SPECIFIC PRODUCT TYPE DS108-6 4
Core Credit Allowance and Component Value Breakdown COMPLETE CORE KITS (CAST CLUTCHES) VALUED % Consisting of cover assembly, intermediate plate, and driven discs 100% DAMAGED PARTS CREDIT (CAST CLUTCHES) VALUED % Reusable cast cover assembly 70% Reusable intermediate plate 20% Reusable Driven Disc 10% Not Eaton or Meritor Disassembled Welded Broken/Cracked COMPLETE CORE KITS (STAMPED CLUTCHES) VALUED % Stamped single-plate (cover and disc) 100% Stamped 2-plate (cover, driven discs, and intermediate plate assembly) 100% DAMAGED PARTS CREDIT (STAMPED CLUTCHES) VALUED % Single Plate Stamped Angle-Spring or Stamped Solo Reusable stamped cover assembly 95% Reusable driven disc 05% Two Plate Stamped Angle-Spring or Stamped Solo Reusable stamped cover assembly 70% Reusable intermediate plate assembly 20% Reusable Driven Discs 10% Not Eaton or Meritor Disassembled Welded Broken/Cracked Core Return Procedures Cores may be returned on a freight collect basis, within the Continental U.S. only, on shipments of 1,000 lbs. or more. All clutch core shipments under 1,000 lbs. must be shipped freight prepaid. The shipping documents should be marked: CORES CORE ITEM NO. 17850, USED AUTO PARTS, VALUE FOR RECONDITIONING ONLY, AT CLASS 60. Use core return form supplied by Eaton. A packing list should also be sent listing the cores being returned, along with customer's address and telephone number. Returns must be boxed and/or strapped securely to pallets. Cores packaged in barrels, drums, or sacks WILL NOT BE ACCEPTED. Clutch discs are required. Freight collect shipments 1000 lbs. or over MUST be shipped via Eaton approved carriers. List of approved carriers accompanies core return form or may be obtained from the appropriate core return location. CORE RETURN LOCATIONS: WEST EAST Eaton Corporation Eaton Corporation Clutch Division Clutch Division 5001 S.W. 20th 6811 Belt Road Oklahoma City, OK 73128 Harrisburg, NC 28075 Phone: (405) 682-0873 Phone: (704) 792-1450 FAX: (405) 682-2031 FAX: (704) 792-1456 NOTE: EATON NOW REQUIRES DRIVEN DISCS AS PART OF THE CORE RETURN. 5 DS108-6
Program Code and Weight Factors The following are the definitions of codes used within our guidelines and price lists: Installation & Component Wgt. AS 14" Cast Iron Angle-Spring... 110 lbs. AS 15 1/2" Cast Iron Angle-Spring... 150 lbs. SAS 14" Stamped Angle-Spring (Single Plate)... 70 lbs. SAS 14" Stamped Angle-Spring (2-Plate)... 100 lbs. AR 350 MM/14" Angle-Ring... 46 lbs. AR 350 MM/14" Angle-Ring (Cover Assembly only)... 36 lbs. AR 350 MM/14" Angle-Ring (Driven Disc only)... 10 lbs. AR 310 MM/13"... 40 lbs. AR 310 MM/13" (Cover Assembly only)... 30 lbs. AR 310 MM/13" (Driven Disc only)... 10 lbs. AL 13" Angle-Link... 45 lbs. AL 13" Angle-Link (Cover Assembly only)... 35 lbs. AL 13" Angle-Link (Driven Disc only)... 10 lbs. EP 14" Cast Iron Easy-Pedal... 110 lbs. EP 15 1/2" Cast Iron Easy-Pedal... 150 lbs. SOLO 14" Stamped (Single Disc)... 70 lbs. (Two Disc)... 100 lbs. Cover Type AFG Adjustment-Free with Greasable Bearing MG Manual Adjust with Greaseable Bearing G Greaseable Bearing Disc Type ROF Rigid Organic Facing DOF Dampened Organic Facing DOF-CO Dampened Organic Facing - Coaxial DCF Dampened Ceramic Facing DCF-CO Dampened Ceramic Facing - Coaxial DCF-SD Dampened Ceramic Facing - Super-Duty DCF-CO-SD Dampened Ceramic Facing - Coaxial - Super Duty DOF-FT Dampened Organic Facing - Free Travel DCF-FT Dampened Ceramic Facing - Free Travel DCF-CO-FT Dampened Ceramic Facing - Coaxial - Free Travel DOF-CO-FT Dampened Organic Facing - Coaxial - Free Travel DCF-CO-VCT Dampened Ceramic Facing - Coaxial - Vibration Control Technology DS108-6 6
14" EASY-PEDAL 2" - 10 Type Load Type Number Color Qty. Each Rating 24 & Up Pcs. 36 & Up Pcs. INSTALLATIONS WITHOUT BRAKE & PINS 108050-59B MG 3200 DCF-CO-FT-SD 4 White 8 110 1400 343.28 336.55 108034-82B MG 3600 DOF-CO-FT White 8 110 1150 290.51 284.81 108034-61B MG 2800 DCF-CO-FT 3 White 8 110 1000 300.56 294.67 15 1/2" EASY-PEDAL INSTALLATIONS WITHOUT BRAKE 108391-77B MG 3600 DOF-CO-FT White 8 150 1250 444.97 436.25 108391-81B MG 3600 DCF-CO-FT 4 White 8 150 1400 453.03 444.15 108391-74B MG 3600 DCF-CO-FT 4 Black 10 150 1650 474.29 464.99 108391-78B MG 4000 DOF-CO-FT Black 10 150 1450 469.58 460.37 108391-82B MG 4000 DOF-CO-FT White 8 150 1400 444.96 436.23 108925-10 MG 4000 DCF-CO-VCT 6 Red 6 150 1860 565.73 554.64 108925-82B MG 3600 DCF-CO-FT 4 Black 7 150 1650 500.22 490.42 NOTE: Installations with "B" suffix do not include Torque Limiting Brake and six (6) Drive Pins. Price Each CLUTCH BRAKES Part Number By Spline WD Net Type 1 3/4"-10 2" - 10 5 Piece Quantity 127740 127760 Torque Limiting 10.59* 127175 127200 Kwik-Konnect 15.77* 127200-20 20 Pc. Box Kwik-Konnect 288.13 127760-50 50 Pc. Box of Torque Limiting 461.31 * Price Each Must be ordered in multiples of 5 DRIVE PIN Part Number Type WD Net 6 Piece Quantity 274C6 Drive Pin 2.00** 274C6-300 50 Bags of 6 per Bag (300 Drive Pins) 527.54 ** Price Each - Must be ordered in multiples of 6 LUBE TUBE Part Number Type WD Net 30 Piece Quantity CLT008P-30 8" Lubrication Tube (30 Pieces) 127.83 7 DS108-6
14" STAMPED ANGLE-SPRING 1 3/4"-10 Type Load Type Number Color Qty. Each Rating 24 & Up Pcs. 36 & Up Pcs. SINGLE PLATE 107683-5 MG 3000 DCF-CO-FT 3 White 8 70 605 220.51 216.18 TWO PLATE (WITH ADAPTER RING & INTERMEDIATE PLATE) 107237-8 MG 2000 DCF-FT 3 Yellow 8 100 860 338.33 331.69 14" SOLO SINGLE PLATE 109400-5 AFG 3000 DCF-CO-FT 3 White 8 70 605 255.21 250.20 109404-5 (Short Stroke) AFG 3000 DCF-CO-FT 3 White 8 70 605 255.21 250.20 TWO PLATE (WITH ADAPTER RINGS & INTERMEDIATE PLATE) 109500-8 AFG 2000 DCF-FT 3 Yellow 8 100 860 391.57 383.89 109503-10 (Short Stroke) AFG 2000 DCF-CO 3 Plain 8 100 860 403.49 395.58 350 MM ANGLE-RING Part Number By Spline Cover Disc Facing Spring Wt. Torque WD NET. 1 1/4"-10 1 1/2"-10 Type Load Type Number Color Qty. Each Rating 24 & Up Pcs. 36 & Up Pcs. INSTALLATION FOR DIESEL ENGINES 107621-1 Cast 2400 DCF-FT 4 Yellow 8 46 500 141.91 139.13 107350-4* Cast 2400 DCF-FT 4 Yellow 8 46 500 231.57 227.03 107620-1 Ductile 2400 DCF-FT 4 Yellow 8 46 500 153.10 150.10 107621-7** Cast 2400 DCF-FT 4 Yellow 8 46 500 185.88 182.24 * Includes release bearing to fit MS or CS 200 or 250 Mack Midliner ** Includes release bearing for Freightliner Business Class only. 330 MM ANGLE-RING 6 1 3/8"-10 Type Load Type Number Color Qty. Each Rating 24 & Up Pcs. 36 & Up Pcs. 107943-3 Cast 2400 DCF 4 Green 6 40 450 139.06 136.33 Stripe 310 MM ANGLE-RING 1 1/4"-10 1 1/2"-10 Type Load Type Number Color Qty. Each Rating 24 & Up Pcs. 36 & Up Pcs. 107605-1 107606-1 Cast 2400 DCF 4 Blue Stripe 6 40 400 133.71 131.09 107616-4 Ductile 2400 DCF 4 Blue Stripe 6 40 400 144.58 141.74 Price Each DS108-6 8
EATON SPICER REMANUFACTURED 14" ANGLE-SPRING 1 3/4"-10 2" - 10 Type Load Type Number Color Qty. Each Rating 24 & Up Pcs. 36 & Up Pcs. WITH GROUND INTERMEDIATE PLATE 107034-30MR MG 3200 ROF 110 1000 117.42 115.11 107063-59MR 107050-59MR MG 3200 DCF-CO-FT-SD 4 White 8 110 1400 214.92 210.71 107034-61MR MG 2800 DCF-CO-FT 3 White 8 110 1000 177.97 174.48 107034-57MR MG 3200 DOF-CO-FT White 8 110 1000 177.22 173.74 WITH NEW INTERMEDIATE PLATE 107063-59MO 107050-59MO MG 3200 DCF-CO-FT-SD 4 White 8 110 1400 229.75 225.24 107034-61MO MG 2800 DCF-CO-FT 3 White 8 110 1000 190.09 186.36 107034-57MO MG 3200 DOF-CO-FT White 8 110 1000 189.33 185.62 EATON SPICER REMANUFACTURED 14" EASY PEDAL WITH NEW INTERMEDIATE PLATE 108034-61MO MG 2800 DCF-CO-FT 3 White 8 110 1000 225.41 220.99 108034-82MO MG 3600 DOF-CO-FT White 8 110 1150 217.14 212.88 108050-59MO MG 3200 DCF-CO-FT-SD 4 White 8 110 1400 265.46 260.25 EATON SPICER REMANUFACTURED 14" STAMPED ANGLE-SPRING SINGLE PLATE 107213-5MO MG 2800 DCF-FT 3 Yellow 8 70 560 146.08 143.21 TWO PLATE 107137-8MO MG 2000 DCF-FT 3 Yellow 8 100 900 231.58 227.04 107137-16MO MG 2800 DOF-FT Yellow 8 100 800 231.57 227.03 Add a $50 core charge to the above exchange prices. Price Each 9 DS108-6
EATON SPICER REMANUFACTURED 15 1/2" ANGLE-SPRING 1 3/4"-10 2" - 10 Type Load Type Number Color Qty. Each Rating 24 & Up Pcs. 36 & Up Pcs. WITH GROUND INTERMEDIATE PLATE 107091-83MR MG 3200 DOF-CO-FT White 8 150 1070 255.67 250.66 107091-77MR MG 3600 DOF-CO-FT White 8 150 1250 255.67 250.66 107091-80MR MG 3200 DCF-CO-FT 4 White 8 150 1400 273.28 267.92 107091-74MR MG 3600 DCF-CO-FT 4 Black 10 150 1650 274.05 268.68 107091-81MR MG 3600 DCF-CO-FT 4 White 8 150 1400 273.28 267.92 WITH NEW INTERMEDIATE PLATES 107091-83MO MG 3200 DOF-CO-FT White 8 150 1070 278.58 273.11 107091-77MO MG 3600 DOF-CO-FT White 8 150 1250 278.58 273.11 107091-80MO MG 3200 DCF-CO-FT 4 White 8 150 1400 296.20 290.39 107091-74MO MG 3600 DCF-CO-FT 4 Black 10 150 1650 296.96 291.14 107091-81MO MG 3600 DCF-CO-FT 4 White 8 150 1400 296.20 290.39 107935-51MO MG 3600 DCF-CO 4 Blue 9 150 1650 322.42 316.10 EATON SPICER REMANUFACTURED 15 1/2" EASY PEDAL WITH NEW INTERMEDIATE PLATE 108391-74MO MG 3600 DCF-CO-FT 4 Black 10 150 1650 357.20 350.20 108391-81MO MG 3600 DCF-CO-FT 4 White 8 150 1400 339.36 332.71 108391-82MO MG 4000 DOF-CO-FT White 8 150 1400 323.79 317.45 108935-51MO MG 3600 DCF-CO 4 Blue 9 150 1650 365.99 358.81 108935-82MO MG 3600 DCF-CO-FT 4 Black 7 150 1700 374.27 366.93 Add a $120 core charge to the above exchange prices. Price Each DS108-6 10
EATON DRIVETRAIN REMANUFACTURED 14" ANGLE-SPRING 1 3/4"-10 2" - 10 Type Load Type Number Color Qty. Each Rating 24 & Up Pcs. 36 & Up Pcs. WITH GROUND INTERMEDIATE PLATE 107034-30DR MG 3200 ROF 110 1000 114.11 111.87 107063-59DR 107050-59DR MG 3200 DCF-CO-FT-SD 4 White 8 110 1400 208.85 204.75 107034-61DR MG 2800 DCF-CO-FT 3 White 8 110 1000 172.96 169.57 107034-57DR MG 3200 DOF-CO-FT White 8 110 1000 172.20 168.83 WITH NEW INTERMEDIATE PLATE 107063-59DO 107050-59DO MG 3200 DCF-CO-FT-SD 4 White 8 110 1400 223.25 218.88 107034-61DO MG 2800 DCF-CO-FT 3 White 8 110 1000 184.72 181.09 107034-57DO MG 3200 DOF-CO-FT White 8 110 1000 183.98 180.37 EATON DRIVETRAIN REMAN 14" STAMPED ANGLE-SPRING SINGLE PLATE 107213-5DO MG 2800 DCF-FT 3 Yellow 8 70 560 141.94 139.15 TWO PLATE 107137-8DO MG 2000 DCF-FT 3 Yellow 8 100 900 225.04 220.63 107137-16DO MG 2800 DOF-FT Yellow 8 100 800 225.04 220.63 Add a $50 core charge to the above exchange prices. EATON DRIVETRAIN REMANUFACTURED 15 1/2" ANGLE-SPRING WITH GROUND INTERMEDIATE PLATE 107091-83DR MG 3200 DOF-CO-FT White 8 150 1070 248.44 243.56 107091-77DR MG 3600 DOF-CO-FT White 8 150 1250 248.44 243.56 107091-80DR MG 3200 DCF-CO-FT 4 White 8 150 1400 265.58 260.37 107091-74DR MG 3600 DCF-CO-FT 4 Black 10 150 1650 266.30 261.07 107091-81DR MG 3600 DCF-CO-FT 4 White 8 150 1400 265.58 260.37 WITH NEW INTERMEDIATE PLATES 107091-83DO MG 3200 DOF-CO-FT White 8 150 1070 270.70 265.39 107091-77DO MG 3600 DOF-CO-FT White 8 150 1250 270.70 265.39 107091-80DO MG 3200 DCF-CO-FT 4 White 8 150 1400 287.82 282.18 107091-74DO MG 3600 DCF-CO-FT 4 Black 10 150 1650 288.57 282.91 107091-81DO MG 3600 DCF-CO-FT 4 White 8 150 1400 287.82 282.18 107935-51DO MG 3600 DCF-CO 4 Blue 9 150 1650 313.31 307.17 Add a $120 core charge to the above exchange prices. Price Each 11 DS108-6
FACTORY DIRECT SUPERSESSION LIST Old Eaton Spicer Superseding Old Eaton Spicer Superseding Part Number Eaton Spicer Part No. Part Number Eaton Spicer Part No. 107034-19MO 107034-30MO 107091-59MR 107091-83MR 107034-19MR 107034-30MR 107091-71MO 107091-77MO 107034-53MO 107034-61MO 107091-71MR 107091-77MR 107034-53MR 107034-61MR 107091-75MO 107091-80MO 107034-54MO 107034-57MO 107091-75MR 107091-80MR 107034-54MR 107034-57MR 107134-57MO 107034-57MO 107035-54MO 107063-59MO 107134-57MR 107034-57MR 107035-54MR 107063-59MR 107137-17MO 107137-16MO 107050-1MO 107050-59MO 107150-52MO 107050-59MO 107050-1MR 107050-59MR 107150-52MR 107050-59MR 107050-52MO 107050-59MO 107234-57MO 107034-57MO 107050-52MR 107050-59MR 107234-57MR 107034-57MR 107050-58MO 107050-59MO 107250-52MO 107050-59MO 107050-58MR 107050-59MR 107250-52MR 107050-59MR 107063-52MO 107063-59MO 107263-52MO 107063-59MO 107063-52MR 107063-59MR 107263-52MR 107063-59MR 107090-11MO 107090-83MO 107291-52MO 107091-80MO 107090-11MR 107090-83MR 107291-52MR 107091-80MR 107090-59MO 107090-83MO 107606-2 107606-1 107090-59MR 107090-83MR 107608-52MO 107608-59MO 107091-10DR,DO,MO,MR 107091-83DR,DO,MO,MR 107608-52MR 107608-59MR 107091-35MO 107091-77MO 107608-59MO 107091-80MO 107091-35MR 107091-77MR 107608-59MR 107091-80MR 107091-3MO 107091-74MO 107615-1 107943-3 107091-3MR 107091-74MR 107621-6 107621-1 107091-52MO 107091-80MO 107625-50DR,DO,MO,MR 107935-51DO,MO 107091-52MR 107091-80MR 107625-51DR,DO,MO,MR 107935-51DO,MO 107091-55MO 107091-81MO 108391-78A 108391-78B 107091-55MR 107091-81MR 108908-59B 108391-80B 107091-59MO 107091-83MO 108925-51MO 108935-51MO 108925-82MO 108935-82MO Drivetrain Service Division Dana Corporation P.O. Box 321 Toledo, OH 43697 Phone:419-866-3900 Fax:419-866-3925 www.dana.com DS108-6 7/98 Dana Corporation, 1998