Electrocomponents Series 450 Data Sheet Rotary Potentiometer Industrial 4 Diameter 1/ Watt, Composition Rotary Potentiometer Features - Bushing - Twist or Bend Tab - Snap-in PC Bracket - PC Terminal Electrical and Mechanical Specifications Resistance Range 100 ohms through 10 Megohms, linear 1K ohms through 1 Megohms, audio Resistance Tolerance ±30%, ±0%, ±10% Rotational Torque Standard: 54-43 gf-cm (Consult CTS for special torque) Stop Strength 10.36 kgf-cm minimum Power Rating 1/ watts @ 55 C (Resistance up to 100K ohms) 1/3 watts @ 55 C (Resistance above 100K ohms) Dielectric Strength 1080 VAC for 1 minute Maximum Operating Voltage 750 VDC Insulation Resistance 100 Megohms minimum @ 50 VDC Angle of Rotation Total Rotation (Potentiometer and Switch) With rotary switch: 30 Without switch or with push switch: 300 Electrical Effective Angle (Potentiometer) 300 Push-Pull Strength of Shaft 10 kg for 10 seconds Rotational Life Standard: 10K cycles Special: 100K, 50K cycles Operating Temperature -10 C to +80 C Solder Heat Resistance 60 C for 5 seconds Mounting Information - Bushing - Twist Tab - Bend Tab - Snap-in PC Bracket - PC Terminal 1-9 015 CTS Corporation. All rights reserved. Information subject to change. 04/9/15
OPTIONAL POWER SWITCHES Contact Series Arrangement Electrical Rating Outline Drawing FR-GC SPST 3 amps @ 15 volts, Rotary 1 amp @ 50 volts AC UL Recognized GC SPST 5 amps @ 0 volts DC Rotary (Automotive) Actuating Angle 0 Actuating Torque 7 to 17 in. oz. (504 to 15 gf-cm) HOLES.39/.094x3.18/.15.50.65 Ø3.4.91 TGC SPST 6 amps @ 15 volts AC Rotary UL & CSA Recognized Actuating Angle 0 Actuating Torque 7 to 17 in. oz. (504 to 15 gf-cm) HOLES.39/.094x3.18/.15.50.65 Ø3.4.91 TV-03 SPST TV-5 rating Rotary UL & CSA Recognized Actuating Angle 0 Actuating Torque 10 to 0 in. oz. (70 to 1441 gf-cm).50.65 Ø3.4.91 HOLES.39/.094x3.18/.15-9 015 CTS Corporation. All rights reserved. Information subject to change. 04/9/15
OPTIONAL POWER SWITCHES Contact Series Arrangement Electrical Ratin g Outline Drawing 040 SPST 6 amps @ 15 volts AC Push-on Push-off 5.6.19 17.5.687 11.9.469 Pre-travel 13/64 (5. ) Activating Force: to 5 lb (0.9 to.3 kg) Ø3.6.930 Ø17.5.687 HOLES-1.93/.076x3.15/.14 041 SPDT 6 amps @ 15 volts AC Push-on Push-off 5.6.19 17.5.687 11.9.469 Pre-travel 13/64 (5.) Activating Force: to 5 lb (0.9 to.3 kgf) Ø3.6.930 Ø17.5.687 HOLES-1.93/.076x3.15/.14 050 SPST 3 amps @ 15 volts AC Rotary (Shallow construction switch) UL & CSA Recognized 7.5 amps @ 0 volts DC (Automotive) 7.14.81 7.14.81 9.5.375 5.6 4.0.19.156 Actuating Angle: 5 Actuating Torque: to 15 in. oz. (144 to 1080 gf-cm) 0.40.016 0.4.016 0.8.031 Ø.4.094 FR-07 DPST 3 amps @ 15 volts, Rotary 1 amp @ 50 volts AC UL Recognized Actuating Angle: 0 Actuating Torque: 10 to 0 in. oz. (70 to 1441 gf-cm) POLE #1.50.65 Ø3.39.91 POLE # HOLES.39/.094 x 3.18/.15 3-9 015 CTS Corporation. All rights reserved. Information subject to change. 04/9/15
OPTIONAL POWER SWITCHES Contact Series Arrangement Electrical Ratin g Outline Drawing TV-00 Actuating Angle DPST Rotary Actuating Torque 10 to 0 in. oz. (70 to 1440 gf-cm) 15 volts AC Pole #1, TV-1 rating Pole #, TV-3 rating UL & CSA Recognized POLE #1 Ø3.4.91.50.65 POLE # HOLES.39/.094x3.18/.15 FR-0 8 SPDT 3 amps @ 15 volts AC Rotary UL Recognized Actuating Angle Actuating Torque 10 to 0 in. oz. (70 to 1440 gf-cm) POLE #1 Ø3.4.91.50.65 POLE # HOLES.39/.094x3.18/.15 TV-01 SPDT TV-4 rating Rotary UL Recognized Actuating Angle Actuating Torque 10 to 0 in. oz. (70 to 1440 gf-cm) Ø3.4.91.50.65 POLE # POLE #1 HOLES.39/.094x3.18/.15 FR-K SPST 3 amps @ 15 volts AC Pull-on Push-off UL & CSA Recognized Pre-travel 5/3 (3.97) Actuating force 7 to 16 oz. - Single section control (198 to 454 gf) 7 to 0 oz. - Tandem control (198 to 567 gf) 10. 8.33.406.38 0.65.813 6.8.66 16.3.641 9.5.375 HOLES.39/.094 X 3.18/.15 4-9 015 CTS Corporation. All rights reserved. Information subject to change. 04/9/15
450T Metal Shaft, Bushing Mou, Type "T" Solder Lug Terminals 0.4 "A"±.016 0.8 "L"±.031.08±0.08.08±.003 Ø3.8 3.±0.13.15±.005 15.1 19.8.781 MAX..06±.003.06±.003 3/8-3NEF 1.7 MAX..500 1 0.4 3 C 450X / 450Y Metal Shaft, Bushing Mount, Printed Circuit Type "X" Or "Y" Terminals LOC. LUG.03.080 ABOVE 5.97 5.97.35.35 MOUNTING SUR FACE 3/8-3 UNEF- A THRD. 4.70.185 Ø3.8 A "L" 3.±0.13.15±.005 15.1 X=17.48.688 Y=.3.875 X=.3.875 Y=8.17 1.109 C.08Ø (3) HOLES.08 ±0.05 PANEL PIERCING GEN. TOL. ±.00 0.69.07 1 0.4 3 450U Metal Shaft, Bushing Mount, Printed Circuit Type "U" Termina ls "L" A.08±0.08.08±.003.06±.003.06±.003 4.17±0.08 Ø3.8 9.9.390 3/8-3 UNEF- A THRD. 3.±0.13.15±.005 1 3 0.4 15.1 16.15±0.05.636±.00 C 5.97±0.05 5.97±0.05.35±.00.35±.00.08±0.05.08±.00 DIA. 3 HOLES 5-9 015 CTS Corporation. All rights reserved. Information subject to change. 04/9/15
450V Metal Shaft, Bushing Mount, Printed Circuit Type V Terminals A "L".08±0.08.08±.003.06±.003.06±.003 4.17±0.08 Ø3.8 11.9.469 3/8-3 UNEF- A THRD. 3.±0.13.15±.005 1 0.4 3 15.1 16.15±0.05.636±.00 C 5.97±0.05 5.97±0.05.35±.00.35±.00.08±0.05.08±.00 DIA. 3 HOLES T-450 Dual-section, Metal Shaft, Bushing Moun t, Type T Solder Lug Terminals (R)..874 (P).08±0.08.08±.003 Ø3.8 3.±0.13.15±.005.06±.003.06±.003 3/8-3 UNEF- A THRD. C "A" 1 3 4 5 6 L 0.4 4 5 6 * Consult CTS for its part no. or availability of more sections 6-9 015 CTS Corporation. All rights reserved. Information subject to change. 04/9/15
TC-450 Dual-section, Concentric Metal Shafts, Bushing Mount, Type T Solder Lug Terminals..874 3/8-3 UNEF- A THRD..08±0.08.08±.003 Ø3.8 "A" l L 3.±0.13.15±.005 1 3 4 5 6.06±.003 C 4 6.06±.003 0.4 5 * Consult CTS for its part no., or availability of more sections 040-TMG450 Metal Shaft, Bushing Mount with Insulated Plate, Type T So lder Lug Terminals, 040 Switch 5.56.19 11.89.468 1.7.500 MOUNTING SUR FACE 1.57.06 0±0.05 0±0.05.437±.00.437±.00 Ø3.8 3/8-3 UNEF- A THRD. 0.51.00 CLEARANCE FOR BUSHING Ø3.58 Ø.141 () HOLES.50 5.16.03 TRAVEL 3.15.14 C * Refer to page 3 for switch details 1.7.500 MAX "L" 1 3 0.4 041-TMG450 Metal Shaft, Bushing Mount with Insulated Plate, Type T So lder Lug Terminals, 041 Switch 5.56.19 11.89.468 1.7.500 MOUNTING SUR FACE 1.57.06 0±0.05 0±0.05.437±.00.437±.00 Ø3.8 3/8-3 UNEF- A THRD. 0.51.00 CLEARANCE FOR BUSHING Ø3.58 Ø.141 () HOLES.50 5.16.03 TRAVEL 3.15.14 C 1.7.500 MAX * Refer to page 3 for 041 switch detail "L" 1 3 0.4 7-9 015 CTS Corporation. All rights reserved. Information subject to change. 04/9/15
050-T450 Metal Shaft, Bushing Mount, Solder Lug terminals, 050 Switch 1.5 (4).060 9.5.374 5.6.0 A MOUNTING SURFACE L * Refer to Ordering Information for switch details.08±0.08.08±.003 Ø3.8 0.4.016.06±.003.06±.003 3.±0.13.15±.005 Ø.4.094 () 1.7.500 MAX 3/8-3 UNEF- A THRD. 1 3 0.4 C * Refer to page 3 for 050 switch detail TGC-TMG450 Metal Shaft, Bushing Mount with Insulated Plate, Type T Solder Lug Terminals, TGC Switch HOLES.4 x 3..010 x.16.516.64.5 1.7.500.50 MOUNTING SURFACE "L".08±0.08.08±.003 Ø3.8 Ø3.4.91.06±.003.06±.003 3.15.14 C 3/8-3 UNEF-A THRD. 1 3 0.4 * Refer to page for TGC switch detail Shaft Trim Options 9.53.375 8.74.344 1.57.06.50.50 3.96.156 5.99.36 5.99.36 1.57.06 4 TEETH 1.17.046 8-9 015 CTS Corporation. All rights reserved. Information subject to change. 04/9/15