MA/MA Series Non-Lube NFPA C S MNR MAJ/MAJ ACV MA/MA Contents MA Series -/" to 5" ore... 5-0 MA Series -/" to 5" ore... -5 How to Select a MA or MA Cylinder...6 MA asic Dimensions -/" to 5" ore... 7-8 MA asic Dimensions -/" to 5" ore... 9-0 MA/MA Series K Type Dimensions -/" to 5" ore... MA/MA Series Detailed Dimensions... -8 MA Series 6" and 8" ore... 9- MA asic Dimensions 6" and 8" ore... 5-6 MA K Type Dimensions 6" and 8" ore...7 MA Detailed Dimensions 6" and 8" ore... 8-5 MA Series -/8" ore... 7-59 MAJ/MAJ Series... 60-89 MA/MA ACV... 90-99 MA with... 00-0 MA/MA Standard s... 05-07 MA/MA Accessories... 08-09 Maintenance Section... 0-800.696.665 www.comoso.com
Notes MA/MA Series 800.696.665 www.comoso.com
MA Series Cylinder Features MA/MA Series ndcap Fasteners Zinc plated steel endcap fasteners for tough environments. Stainless steel is available as an option. Seal Carboxylated nitrile rounded-lip rod seal combines low friction with leak-free service and long service life. Piston Standard case-hardened (50-6 Rc), hard chrome plated and polished carbon steel piston rod for reliable performance, long rod seal life and low friction. Grades of stainless steel are available as options. earing and Piston Manufactured from tough, impact-resistant, bearinggrade materials, the composite rod bearing and piston provide excellent wear resistance. Other advantages include noise reduction without the need for bumpers and lower friction than other materials. Aluminum piston with wear band is available for bumper piston seals and other options. Wiper Outboard urethane rod wiper protects the cylinder by removing external debris and adherents from the piston rod during the entire stroke. Piston Seals Carboxylated nitrile rounded-lip piston seals combine low friction with leak-free service and long service life. al bumper piston seals provide additional noise reduction and smooth end-of-stroke deceleration. Piston Assembly High strength steel fastener (composite piston) or piston rod thread (aluminum piston) connects the piston to the rod and is secured in place with anaerobic adhesive. Adjustable Cushions Included as a standard feature. Heads and Caps High-pressure die cast aluminum heads and caps are designed with the most flexible mounting platform. TF mount is standard. Anodized for corrosion resistance. Ports NPTF ports are standard. Magnetic Piston Ring Included as a standard feature for use with a variety of sensors. Cylinder ody xtruded aluminum profile cylinder body offers integrated sensor grooves to minimize sensor installation time, maximize sensor protection and eliminate the need for brackets. Grooves readily accept both Global and Mini-Global Sensors. Single corner lobe of extrusion will accept legacy MA sensor brackets. Anodized and brightdipped for corrosion resistance, maximum seal life and lower friction. MA/MA C S MNR MAJ/MAJ ACV For a complete list of MA options, please see pages 6 and 6. 5 800.696.665 www.comoso.com
MA Model Code for -/" to 5" ore MA/MA Series.00 ore.50.00.50.5.00 5.00 Cushion Head nd C Standard (cushioned head end) lank Noncushioned head end How to Order MA Series Cylinders for -/" to 5" ore MA cylinders can be specified by model number by using the table below. C J MA U A C 6.000 Double Cylinder 5 Specify K only if double rod cylinder is required. Mounting Style Specify mounting style code (see table on following page). Series MA Cylinder Construction lank Standard (extruded body, standard round lobe orientation) * A xtruded body, round lobe orientation rotated 90 degrees from standard * N xtruded body, round lobe orientation rotated 80 degrees from standard * Z xtruded body, round lobe orientation rotated 70 degrees from standard * T Aluminum round tube and carbon steel tie rods and nuts * See Table on page 0. Only applies to -/" to " ore. Ports Standard (NPTF) Seals lank Standard (nitrile seals) Fluorocarbon rod wiper and rod seal only Piston Number Standard (rod code number ) Special Modification Specify S only for special modification other than rod end, and then describe modification in item notes. Stroke Length Specify stroke length required in inches. Cushion Cap nd C Standard (cushioned cap end) lank Non-cushioned cap end Piston Thread Type A Standard (UNF Unified Thread) W SF ritish Fine M Metric (see page 06) Material Code lank Standard Y 7- PH stainless steel J 0 stainless steel S 6 stainless steel Piston Type lank Standard (lipseals and magnetic ring) 5 Lipseals, no magnetic ring 5 Lipseals, no magnetic ring (aluminum piston) Lipseals and magnetic ring (aluminum piston) umper seals, no magnetic ring 6 umper seals and magnetic ring Lipseals, /" thick bumpers both ends H Lipseals, /" thick bumper head end C Lipseals, /" thick bumper cap end D Lipseals and magnetic ring, /" thick bumpers both ends F Lipseals and magnetic ring, /" thick bumper head end R Lipseals and magnetic ring, /" thick bumper cap end How to order MA Series cylinders with sensors: Sensors must be ordered separately and are not mounted to the cylinder prior to shipment.. Cylinder model number must have a Piston Type with a magnetic ring ((blank),, 6, D, F or R).. Please refer to pages M-M9 for sensor part numbers and specifications. Global, Mini-Global, NAMUR and Weld Immune Sensors will fit the MA Series.. Style DD mounts and tie rod versions with Global Sensors will require tie rod bracket P8S-TMA0X. Please refer to page M9 for more information. Piston Thread Style Small male 8 Intermediate male 9 Short female 55 For use with Split Coupler Special (and specify all dimensions required) Addition of /" bumper results in a /" stroke loss per bumper, per end. For example, a 6" stroke cylinder with /" bumpers at both ends (option ) has an effective stroke of 5-/". Used for external chemical compatibility applications, not high temperature. Review Piston Selection Chart on page A to determine proper piston rod diameter. (Note: MA has only one rod diameter per bore size, so proper piston rod diameter from chart result may lead to bore size change). For oversize rod within the same bore size, please see MA section. For additional information regarding this style, refer to page 05. If non-standard Material Code is required with this option, please place an S for special in Special Modification field and specify rod material in the item notes. 5 Double rod cylinders not available with composite piston type. 6 800.696.665 www.comoso.com
MA Mounting Styles for -/" to 5" ore MA/MA Series MA Series Mounting Styles for -/" to 5" ore Mounting Code Standard Mount (NFPA MX5/MS) Tie s xt. Cap nd NFPA Mounting Style TF Style TC Head Rectangular Flange (NFPA MF) Description *Double rod end cylinders can be ordered with head mountings, i.e. KJ (see page 9). Tie s xt. oth nds Style J Style TD Cap Rectangular Flange (NFPA MF) Side Lug Available ore s MA TF MX5/MS Sleeve Nut with Side Tap (standard mount) -/ - 5 T MX0 No Mount (same construction as TF) -/ - 5 T MX5 Sleeve Nut (same construction as TF) -/ - 5 F MS Side Tap (same construction as TF) -/ - 5 J MF Head Rectangular Flange -/ - 5 H MF Cap Rectangular Flange -/ - 5 T MX Tie s xtended Head nd -/ - 5 TC MX Tie s xtended Cap nd -/ - 5 TD MX Tie s xtended oth nds -/ - 5 C MS Side Lug -/ - 5 C MS Side nd Angle -/ - 5 G MS7 Side nd Lug -/ - N N/A ase ar -/ - MP Cap Fixed Clevis -/ - 5 C MP Cap Detachable Clevis -/ - 5 MP Cap Detachable ye -/ - DD MT Intermediate Trunnion -/ - 5 KTF* MDX5/MDS Double nd, TF Mount -/ - 5 Style H Style C Tie s xt. Head nd Style T (NFPA MX) Side nd Angle Style C MA/MA C S MNR MAJ/MAJ ACV (NFPA MX) (NFPA MX) (NFPA MS) (NFPA MS) Side nd Lug ase ar Mount Cap Fixed Clevis Cap Detachable Clevis Style G Style N Style Style C (NFPA MS7) (NFPA MP) (NFPA MP) Cap Detachable ye Intermediate Trunnion Double nd Style Style DD Style KTF (NFPA MP) (NFPA MT) (NFPA MDX0) 7 800.696.665 www.comoso.com
Catalog 0900P- MA General Specifications General Specifications NFPA interchangeable ore sizes -/", ", -/", -/", " and 5" Strokes available in any practical stroke length diameters 5/8" and " end styles standard, specials available Single rod end or double rod ends Cushions standard and adjustable at both ends, optional non-cushioned Operating pressure 50 PSIG (7 ar) maximum air service Cylinder Weights MA Cylinders ore (inch) (inch) Mounting Weight Adders No Mount Single MA ase Wt. Per Inch (lbs.) (lbs.) -/ 5/8.57 0.0 5/8. 0. -/ 5/8.87 0. -/ 5.7 0. 7.5 0.9 5 0.99 0.6 ore Weight (lbs) by Mounting Style (inch) J, H C, G DD C C -/ 0.5 0.5 0.6.70 0. 0.5 0.0 0.76 0.6 065.8 0. 0.5 0.9 -/. 0.8.05.00 0. 0.5 0. -/.76 0.98.8 5.5.6 0.5.06.05.5.0 6.75.6 0.5.9 5 6.6.0.9 8.77 N/A 0.57. MA/MA Series Media dry, filtered air Temperature range -0 F to +65 F (- C to +7 C) Mounting styles 8 standard styles One porting style NPTF RoHS compliant For material options, including seals and piston rods, please see Material Specifications on next page. Standard Cushion Position Mounting Code Position All MA mounts Standard Port s ore NPTF -/ /8 /8 -/ /8 -/ / / 5 / For a guided version of the MA Series, please see the H Series in Section F. 8 800.696.665 www.comoso.com
MA Material Specifications and s MA/MA Series Material Specifications Standard Temperatures and Applications Head and cap...lack anodized aluminum alloy Head and cap screws...zinc plated steel alloy Cylinder body...clear anodized aluminum alloy Piston rod...case-hardened, chrome plated carbon steel seal...carboxylated nitrile (Nitroxile) wiper...molythane bearing...composite Needle valve inserts...composite Piston...Composite (standard) Aluminum alloy (optional) Piston seals...carboxylated nitrile (Nitroxile) Piston bearing...composite (for standard piston) MolyGard (for aluminum piston) Magnetic ring...plastic-bound magnetic material Other Standard s Material and Part Changes Cylinder seal options umper piston seal options Piston rod material options Fluorocarbon rod wiper and rod seal for external chemical compatibility Other seal options available, please consult factory Carboxylated nitrile (Nitroxile) for standard temperatures Case-hardened, chrome plated carbon steel (standard) 7- PH stainless steel, chrome plated 0 stainless steel, chrome plated 6 stainless steel, chrome plated (for stainless steel without chrome plating, please consult factory) Piston fastener...zinc plated steel alloy (for composite piston) Piston rod for aluminum piston O-rings...Nitrile nd seals...nitrile Cushion seals...urethane Cushion needle valves...composite Tie-rods/studs...lackened carbon steel (some mounts) Tie-rod nuts...steel alloy, SA J995 Grade 8 (some mounts) MA/MA C S MNR MAJ/MAJ ACV /" thick Urethane bumpers option 9 800.696.665 www.comoso.com
MA/MA ody Orientations MA/MA Series MA/MA xtruded Cylinder ody Orientation s* Standard lank A Z N * Only applies to -/" to " ore 0 800.696.665 www.comoso.com
MA Series Cylinder Features MA/MA Series ndcap Fasteners Zinc plated steel endcap fasteners for tough environments. Stainless steel is available as an option. Seal Carboxylated nitrile rounded-lip rod seal combines low friction with leak-free service and long service life. Wiper Outboard urethane rod wiper protects the cylinder by removing external debris and adherents from the piston rod during the entire stroke. Piston Standard case-hardened (50-6 Rc), hard chrome plated and polished carbon steel piston rod for reliable performance, long rod seal life and low friction. Grades of stainless steel are available as options. Piston Seals Carboxylated nitrile rounded-lip piston seals combine low friction with leak-free service and long service life. al bumper piston seals provide additional noise reduction and smooth end-of-stroke deceleration. Gland/earing Threaded bronze rod gland is externally removable, without cylinder disassembly, for easy maintenance. Machined flats permit the use of common tools for removal and installation. s include HI LOAD design for side load conditions and metallic wiper design for extremely tough rod contaminant/adherent applications. Piston Manufactured from tough, impact-resistant, bearinggrade materials, the composite piston provides excellent wear resistance. Other advantages include noise reduction without the need for bumpers and lower friction than other materials. Aluminum piston with wear band (shown) is available for bumper piston seals, hydraulic service and other options. For a complete list of MA options, please see pages and 6. Adjustable Cushions Available Heads and Caps High-strength aluminum heads and caps are designed with the most flexible mounting platform. TF mount is standard. Using our proprietary extrusion, we can offer customization of the endcaps for unique designs, including extra ports, duplex, tandem and many special mountings. Anodized for corrosion resistance. Piston Assembly High strength steel fastener or piston rod thread connects the piston to the rod and is secured in place with anaerobic adhesive. Ports NPTF ports are standard. Other port styles available. Magnetic Piston Ring Included as a standard feature for use with a variety of sensors. Cylinder ody xtruded aluminum profile cylinder body offers integrated sensor grooves to minimize sensor installation time, maximize sensor protection and eliminate the need for brackets. Grooves readily accept both Global and Mini- Global Sensors. Single corner lobe of extrusion will accept legacy MA sensor brackets. Anodized and bright-dipped for corrosion resistance, maximum seal life and lower friction. MA/MA C S MNR MAJ/MAJ ACV 800.696.665 www.comoso.com
MA Model Code for -/" to 5" ore MA/MA Series.00 ore.50.00.50.5.00 5.00 Double Cylinder Specify K only if double rod cylinder is required. Cushion Head nd lank Non-cushioned head end C Cushioned head end (n/a for.50" bore with " rod or ML) How to Order MA Series Cylinders for -/" to 5" ore MA cylinders can be specified by model number by using the table below. J MA U A 6.000 Mounting Style Specify mounting style code (see table on following page). Series MA Air service ML Hydraulic service Ports U NPTF R SPP SPT T SA Seals lank Standard (nitrile seals) V Fluorocarbon seals Fluorocarbon rod wiper and rod seal only 5 Low temperature seals M Metallic rod wiper, nitrile seals 6 Piston Number Specify rod code number for required diameter. 8, Stroke Length Specify stroke length required in inches. Cushion Cap nd lank Non-cushioned cap end C Cushioned cap end (not available for ML) Piston Thread Type A Standard (UNF Unified Thread) W SF ritish Fine M Metric (see page 06) Cylinder Construction lank Standard (extruded body, standard round lobe orientation) * A xtruded body, round lobe orientation rotated 90 degrees from standard * N xtruded body, round lobe orientation rotated 80 degrees from standard * Z xtruded body, round lobe orientation rotated 70 degrees from standard * T Aluminum round tube and carbon steel tie rods and nuts * See Table on page 0. Only applies to -/" to " ore. Piston Type lank Standard (lipseals and magnetic ring) Lipseals, no magnetic ring Lipseals, no magnetic ring (aluminum piston) Lipseals and magnetic ring (aluminum piston) (standard for ML) umper seals, no magnetic ring 6 umper seals and magnetic ring Lipseals, /" thick bumpers both ends H Lipseals, /" thick bumper head end C Lipseals, /" thick bumper cap end D Lipseals and magnetic ring, /" thick bumpers both ends F Lipseals and magnetic ring, /" thick bumper head end R Lipseals and magnetic ring, /" thick bumper cap end Not available with Linear Position Sensor (). Piston Types (blank),, and 6 not available for ML. Piston Types (blank) and not available for oversize rod numbers and. Seals option V only available with Piston Types and. Seals option only available with Piston Types and. Addition of /" bumper results in a /" stroke loss per bumper, per end. For example, a 6" stroke cylinder with /" bumpers at both ends (option ) has an effective stroke of 5-/". Reed and solid-state sensors only available with standard seals or options and M. See footnote. 5 Used for external chemical compatibility applications, not high temperature. 6 If fluorocarbon seals are required with this option, please place an S for special in the Special Modification field and specify the fluorocarbon seals and metallic rod wiper in the item notes. 7 For Linear Position Sensor (), please include the following information for the Special Modification item notes: Specia Modification Specify S only for special modification other than rod end, and then describe modification in item notes. (Includes MA with Linear Position Sensor ) 7 Piston Thread Style Small male 8 Intermediate male 9 Short female 55 For use with Split Coupler 9 Special (and specify all dimensions required) Material and Gland Code lank Standard rod and gland H Standard rod and HI LOAD gland Y 7- PH stainless steel rod and standard gland Z 7- PH stainless steel rod and HI LOAD gland J 0 stainless steel rod and standard gland 0 K 0 stainless steel rod and HI LOAD gland 0 S 6 stainless steel rod and standard gland 0 T 6 stainless steel rod and HI LOAD gland 0 a. Sensor part number (see pages 00-0) b. Sensor position c. Port position (if other than position ) d. Length of stop tubing, gross stroke and net stroke (if required) Also, Piston Type option (blank),, 6, D, F or R is required. 8 Review Piston Selection Chart on page A to determine proper piston rod diameter. 9 For additional information regarding this style, refer to page 05. If nonstandard Material and Gland Code is required with this option, please place an S for special in Special Modification field and specify Material and Gland Code in the item notes. 0 Not available for ML. If a stop tube is required, specify gross stroke (net stroke + stop tube) in the model number, then place an S for special in the Special Modification field and specify the stop tube length in the item notes. Not available with Piston Types (blank) and. Double rod cylinders not available with composite piston type. How to order MA/ML Series cylinders with sensors: Sensors must be ordered separately and are not mounted to the cylinder prior to shipment.. Cylinder model number must have a Piston Type with a magnetic ring ((blank),, 6, D, F or R).. Please refer to pages M-M9 for sensor part numbers and specifications. Global, Mini-Global, NAMUR and Weld Immune Sensors will fit the MA/ML Series.. Style DD mounts and tie rod versions with Global Sensors will require tie rod bracket P8S-TMA0X. Please refer to page M9 for more information. 800.696.665 www.comoso.com
MA Mounting Styles for -/" to 5" ore MA/MA Series MA Series Mounting Styles for -/" to 5" ore NFPA Available ore s Mounting Mounting Description MA/ML- MA/ML- Code MA/ML Style w/o Stop Tube w/stop Tube TF MX5/MS Sleeve Nut with Side Tap (standard mount) -/ - 5* - 5-5 T MX0 No Mount (same construction as TF) -/ - 5-5 - 5 T MX5 Sleeve Nut (same construction as TF) -/ - 5-5 - 5 F MS Side Tap (same construction as TF) -/ - 5* - 5-5 J MF Head Rectangular Flange -/ - 5-5** - 5 H MF Cap Rectangular Flange -/ - 5-5** - 5** T MX Tie s xtended Head nd -/ - 5 - - 5 TC MX Tie s xtended Cap nd -/ - 5 - - TD MX Tie s xtended oth nds -/ - 5 - - C MS Side Lug -/ - 5-5 - 5 C MS Side nd Angle -/ - 5-5 - 5 G MS7 Side nd Lug -/ - * - - N N/A ase ar -/ - * - - MP Cap Fixed Clevis -/ - 5-5** - 5** C MP Cap Detachable Clevis -/ - 5-5** - 5** MP Cap Detachable ye -/ - 5-5** - 5** D MT Head Trunnion -/ - 5* - 5-5 D MT Cap Trunnion -/ - 5-5** - 5** DD MT Intermediate Trunnion -/ - 5 - - KTF*** MDX5/MDS Double nd, TF Mount -/ - 5-5 - 5 * Mounts TF, F, G, N and D not available for -/" bore with " rod. ** May interfere with mounting. Please provide clearance for Linear Position Sensor overhang (see page 0). Standard Mount Head Rectangular Flange Cap Rectangular Flange Tie s xt. Head nd (NFPA MX5/MS) Tie s xt. Cap nd (NFPA MX) Side nd Lug Style TF Style TC Style G (NFPA MF) Tie s xt. oth nds (NFPA MX) ase ar Mount Style J Style TD Style N (NFPA MF) Side Lug (NFPA MS) Cap Fixed Clevis Style H Style C Style (NFPA MX) Side nd Angle (NFPA MS) Cap Detachable Clevis Style T Style C Style C MA/MA C S MNR MAJ/MAJ ACV (NFPA MS7) Cap Detachable ye Head Trunnion (NFPA MP) Cap Trunnion (NFPA MP) Intermediate Trunnion Style Style D Style D Style DD (NFPA MP) (NFPA MT) (NFPA MT) (NFPA MT) Double nd Style KTF ***Double rod end cylinders can be ordered with head mountings, i.e. KJ (see page ). (NFPA MDX0) 800.696.665 www.comoso.com
Catalog 0900P- MA and ML General Specifications General Specifications NFPA interchangeable ore sizes -/", ", -/", -/", " and 5" Strokes available in any practical stroke length diameters 5/8", " and -/8" end styles standard, specials available Single rod end or double rod ends Cushions optional and adjustable at either end or both ends (n/a for ML Hydraulic Version) Operating pressure MA = 50 PSIG (7 ar) maximum air service ML = 00 PSIG (7 ar) maximum hydraulic service Cylinder Weights MA/ML Cylinders MA/MA Series Media MA = dry, filtered air ML = filtered hydraulic oil Temperature range -0 F to +65 F (- C to +7 C) with standard seals -0 F to +50 F (- C to + C) with fluorocarbon seals option -50 F to +50 F (-6 C to +66 C) with low temperature seals option Mounting styles 0 standard styles RoHS compliant For material options, including seals, piston rods and glands, please see Material Specifications on next page. Standard Cushion Position ore (inch) (inch) No Mount Single MA/ML ase Wt. (lbs.) Mounting Weight Adders Per Inch (lbs.) No Mount Double ase Wt. (lbs.) Per Inch (lbs.) -/ 0.65.7 0.0.6 0.8 0.65.0 0..05 0.0.00.99 0.5. 0.58 -/ 0.65.5 0..96 0..00.06 0.7 5.7 0.60 -/.00 6.5 0. 7.65 0.6.75 7.9 0.6.6.05.00 8.80 0.9 0. 0.7.75 0.9 0.69.7. 5.00.0 0.6 5.8 0.8.75.7 0.8 8.89. Mounting Code Position All except D, D, DD D, D, DD Standard Port s ore NPTF SPT SPP SA -/ /8 Rc/8 G/8 6 /8 Rc/8 G/8 6 -/ /8 Rc/8 G/8 6 -/ / Rc/ G/ 0 / Rc/ G/ 0 5 / Rc/ G/ 0 ore Weight (lbs) by Mounting Style (inch) J, H D, D C, G DD C C -/ 0.5 0.50 0.5 0.6.70 0. 0.5 0.0 0.76 0.50 0.6 065.8 0. 0.5 0.9 -/. 0.50 0.8.05.00 0. 0.5 0. -/.76 0.50 0.98.8 5.5.6 0.5.06.05 0.50.5.0 6.75.6 0.5.9 5 6.6 0.50.0.9 8.77.6 0.57. For a guided version of the MA or ML Series, please see the H Series in Section F. 800.696.665 www.comoso.com
MA and ML Material Specifications MA/MA Series Material Specifications Standard Temperatures and Applications Head and cap...lack anodized aluminum alloy Head and cap screws...zinc plated steel alloy Cylinder body...clear anodized aluminum alloy Piston rod...case-hardened, chrome plated carbon steel seal...carboxylated nitrile (Nitroxile) wiper...molythane bearing (gland)...ronze alloy Piston...Composite (standard) Aluminum alloy (optional) Piston seals...carboxylated nitrile (Nitroxile) Piston bearing...composite (for standard piston) MolyGard (for aluminum piston) MA s Material and Part Changes High temperatures All seals and wiper are (-0 F to +50 F) fluorocarbon Aluminum piston only (without magnetic ring) ML Hydraulic Version Material and Part Changes Hydraulic service Aluminum piston only Hydraulic service (general) (all temperatures) Cushions and bumper piston seals not available (high temp) Hydraulic service (std temp) Polyurethane TS-000 rod seal and nitrile piston seals (for hydraulic use) Magnetic ring...plastic-bound magnetic material Piston fastener...zinc plated steel alloy (for composite piston) Piston rod for aluminum piston O-rings...Nitrile nd seals...nitrile Cushion seals...urethane Cushion needle valves...stainless steel Tie-rods/studs...lackened carbon steel (some mounts) Tie-rod nuts...steel alloy, SA J995 Grade 8 (some mounts) Low temperatures (-50 F to +50 F) seal, piston seals, o-rings and end seals are low temperature-rated nitrile Aluminum piston only Fluorocarbon TS-000 rod seal; wiper and all seals are fluorocarbon (for hydraulic use) MA/MA C S MNR MAJ/MAJ ACV Other Standard s Material and Part Changes Cylinder seal options Fluorocarbon for high Piston rod temperatures or chemical material options compatibility Other seal options available, please consult factory umper piston seal options (MA only, n/a for ML) /" thick Urethane bumpers option Carboxylated nitrile (Nitroxile) for standard temperatures Fluorocarbon for high temperatures or chemical compatibility HI LOAD gland option Metallic rod scraper option Case-hardened, chrome plated carbon steel (standard) 7- PH stainless steel, chrome plated 0 stainless steel, chrome plated (n/a for ML) 6 stainless steel, chrome plated (n/a for ML) (for stainless steel without chrome plating, please consult factory) Composite bearing pressed into bronze alloy gland Dual high strength bronze wipers with PTF (5/8" rod only) or fluorocarbon energizer 5 800.696.665 www.comoso.com
Cylinder Selection MA/MA Series How to Select a MA or MA Cylinder Parker cylinders are available based on air or hydraulic operating pressure. The many styles, sizes and optional features available assure that your application requirements are precisely met. To select a cylinder, follow these simple steps: Step - Determine the correct cylinder bore size necessary to achieve required force using the available operating pressure. Step - Determine the series cylinder to use, based on operating pressure. Step - Turn to the appropriate cylinder selection section. Select the mounting style that fits your installation needs. Determine the bore and rod sizes available for the model you select. Then complete model selection. - Choose a rod end style and the desired rod end accessories. - the cylinder to meet your application requirements. Step - Consider the following conditions which may require further modifications to the cylinder you have selected. Application Condition Quick Starts or Stops Long Push Stroke High-column Loading Long Push Stroke Long Horizontal Stroke High Operating Temperatures Check the Following General s and Modifications MA Non-Cushioned (adjustable cushions standard) Non-Magnetic piston (magnetic ring standard) Piston umper Seals Piston umpers (/" thick) Port Relocation (cushions will follow) Double nd nd Modifications Materials (grades of stainless steel) Fluorocarbon Wiper and Seal only Mixed Mountings Round Tube and Tie Construction Stainless Steel Fasteners/Tie s Hydro-Check unit for smooth hydraulic control Air Cylinder/Valve Combination (ACV) Adjustable Point Sensors (order separately) lock version (see MAJ) MA Adjustable Cushions Non-Magnetic Piston (magnetic ring standard) Piston umper Seals Piston umpers (/" thick) Port and Adjustable Cushion Relocation Port Thread Styles Multiple Ports Confirm that determined thrust is sufficient to accelerate or decelerate cylinder and load within prescribed distance. al cushions should be used to reduce shock during deceleration, check that peak pressures will be within tolerable limits. Check whether stop tube (MA with aluminum piston only) is required to prevent excessive bearing loads and wear. Determine if standard size piston rod is strong enough to accommodate intended load. See Application ngineering section for recommendations. Determine if standard size piston rod is strong enough to accommodate intended load. For temperatures between 65 F and 50 F use MA or ML cylinder with high temperature seals. MA (continued) Special Heads, Caps, Pistons and Mounts Double nd Oversize Diameters nd Modifications Materials (grades of stainless steel) Fluorocarbon Wiper and Seal only Fluorocarbon Seals (all cylinder seals) Metallic Wiper HI LOAD Gland Assembly Stop Tube Mixed Mountings Round Tube and Tie Construction Stainless Steel Fasteners/Tie s Shock Absorber on Cap nd NuCushion umpers LCTROFLUOR Coating Hydro-Check unit for smooth hydraulic control Air Cylinder/Valve Combination (ACV) Adjustable Point Sensors (order separately) Continuous Linear Position Sensing () High Temperature Service (to +50 F) Low Temperature Service (to -50 F) Hydraulic Service (ML) (00 PSIG) lock version (see MAJ) 6 800.696.665 www.comoso.com
MA Single Dimensioned Drawings MA/MA Series MA Single Dimensioned Drawings for -/" to 5" ore (Styles TF, T, T and F) Y DD DH (Hex ) ØMM MA Cylinder Dimensions Styles TF, T, T and F TN TH NT Thread, ND Deep Tapped Mtg. Holes G G ØNA WF G J C C XT KK or CC A LAF WF VF C P + Stroke SN + Stroke LF + Stroke ZJ + Stroke VS D Wrench Flats ØMM ØS For dimensions of all standard rod end styles, please see page 8. S = pilot diameter VS = length of pilot diameter R MA/MA C S MNR MAJ/MAJ ACV Thread +.000 ore No. Dia. MM Style 8 CC Style & 9 KK A AA G G -.00 S C C C D DD DH (NPTF) G -/ 5/8 /-0 7/6-0 0.750.00 0.56 0.7. 0.85.000 0.500 / /-8 /.000 /8.8 5/8 /-0 7/6-0 0.750.600 0.56 0.6. 0.85.8 0.7 / 5/6-5/6.500 /8.75 -/ 5/8 /-0 7/6-0 0.750.00 0.56 0.6. 0.85.7 0.7 / 5/6-5/6.000 /8. -/ 7/8- /-6.5.900 0.700 0.500.99 0.50.50 0.88 7/8 /8- /8.750 /.59 7/8- /-6.5.700 0.700 0.500.99 0.50.50 0.88 7/8 /8- /8.500 /.59 5 7/8- /-6.5 5.800 0.78 0.5.99 0.50.50 0.975 7/8 /-0 / 5.500 /.59 ore No. Dia. MM J LAF NA ND NT R +.005 -.005 TH TN VF VS WF XT Y Add Stroke LF P SN ZJ -/ 5/8 0.98.750 0.56 0.75 /-0.0 0.99 0.65 0.65 -.000.98.875.65..50.65 5/8 0.98.750 0.56 0.8 5/6-8.80. 0.875 0.65 0.50.000.98.875.65..50.65 -/ 5/8 0.98.750 0.56 0.65 /8-6.90.9.50 0.65 0.50.000.98.98.750.75.75.750 -/.5.500 0.98 0.750 /-.760.868.500 0.865 0.50.75.8.8.50.65.65 5.65.5.500 0.98 0.750 /-.0..06 0.865 0.50.75.8.8.50.65.65 5.65 5.9.500 0.98 0.98 5/8-.00.7.688 0.865 0.50.75.8.8.500.875.875 5.875 7 800.696.665 www.comoso.com
nd Dimensions -/" to 5" ore MA/MA Series MA nd Dimensions -/" to 5" ore Thread Style (NFPA Style SM) Small Male A LAF WF VF VS Thread Style 8 (NFPA Style IM) Intermediate Male A LAF WF VF VS C C ØNA ØMM ØS ØNA ØMM ØS KK D Wrench Flats CC D Wrench Flats Thread Style 9 (NFPA Style SF) Short Female Thread Style 55 For use with Split Coupler (see page 05 for more information) D Wrench Flats C WF VF VS ØMM R/6 VF VS ØNA ØMM ØS Ø AM ØS KK A ØAF A AD WG Groove Has /6" Internal Radii At Corners Thread Style - Special Thread Special threads, rod extensions, rod eyes, blanks, etc. are also available. To order, specify Style and give desired dimensions for KK or CC, A and W or WF. If otherwise special, please supply dimensioned sketch. Applies to all rod ends: S = pilot diameter VS = length of pilot diameter nd Dimensions Thread +.000 ore Dia. Style 8 Style & 9 -.00 No. MM CC KK A AD A AF AM S C D LAF NA VF VS WF WG -/ 5/8 /-0 7/6-0 0.750 0.65 0.50 0.75 0.570. 0.85 /.750 0.56 0.65 -.000.750 5/8 /-0 7/6-0 0.750 0.65 0.50 0.75 0.570. 0.85 /.750 0.56 0.65 0.50.000.750 -/ 5/8 /-0 7/6-0 0.750 0.65 0.50 0.75 0.570. 0.85 /.750 0.56 0.65 0.50.000.750 -/ 7/8- /-6.5 0.98 0.75 0.688 0.950.99 0.50 7/8.500 0.98 0.865 0.50.75.75 7/8- /-6.5 0.98 0.75 0.688 0.950.99 0.50 7/8.500 0.98 0.865 0.50.75.75 5 7/8- /-6.5 0.98 0.75 0.688 0.950.99 0.50 7/8.500 0.98 0.865 0.50.75.75 8 800.696.665 www.comoso.com
MA Single Dimensioned Drawings MA/MA Series MA Single Dimensioned Drawings for -/" to 5" ore (Styles TF, T, T and F) TN TH±.00 NT Thread, ND Deep Tapped Mtg. Holes DD DH (Hex ) ØMM MA Cylinder Dimensions Styles TF, T, T and F Thread ore Dia. Style 8 Style & 9 No. MM CC KK A AA -/ -/ -/ 5 WF Y XT G G G C P + Stroke SN + Stroke LF + Stroke ZJ + Stroke C J ØNA A KK or CC D Wrench Flats LAF WF VF C R ØMM D Wrench Flats For dimensions of all standard rod end styles, please see page 0. -/" bore with " rod is T mount, F mount not available -/" bore with " rod cannot have a cushion at head end +.000 -.00 G G C C C D D DD DH (NPTF) 5/8 /-0 7/6-0 0.750.00. 0.56 0.7 0.85.000 0.500 / /-8 /.000 /8.8 7/8- /-6.5.00.99 0.56 0.7 0.50 0.500 7/8 -/8 /-8 /.000 /8.8 5/8 /-0 7/6-0 0.750.600. 0.56 0.6 0.85.000 0.56 / 5/6-5/6.500 /8.75 7/8- /-6.5.600.99 0.56 0.6 0.50.000 0.56 7/8 -/8 5/6-5/6.500 /8.75 5/8 /-0 7/6-0 0.750.00. 0.56 0.6 0.85.000 0.59 / 5/6-5/6.000 /8. 7/8- /-6.5.00.99 0.56 0.6 0.50.000 0.59 7/8 -/8 5/6-5/6.000 /8. 7/8- /-6.5.900.99 0.700 0.500 0.50.88 0.79 7/8 -/8 /8- /8.750 /.59 -/8 -/- -.65.900.999 0.700 0.500 0.65.88 0.79 -/8-7/8 /8- /8.750 /.59 7/8- /-6.5.700.99 0.700 0.500 0.50.88 0.79 7/8 -/8 /8- /8.500 /.59 -/8 -/- -.65.700.999 0.700 0.500 0.65.88 0.79 -/8-7/8 /8- /8.500 /.59 7/8- /-6.5 5.800.99 0.78 0.5 0.50.88 0.8 7/8 -/8 /-0 / 5.500 /.59 -/8 -/- -.65 5.800.999 0.78 0.5 0.65.88 0.8 -/8-7/8 /-0 / 5.500 /.59 Ø G MA/MA C S MNR MAJ/MAJ ACV ore -/ -/ -/ 5 No. Dia. MM J LAF NA ND NT R +.00 -.00 TH TN VF WF XT Y Add Stroke LF P SN ZJ 5/8 0.98.750 0.56 0.75 /-0.0 0.99 0.65 0.65.000.98.875.65..50.65 0.98.500 0.98 - -.0 0.99-0.865.75 -.50.65. - 5.000 5/8 0.97.750 0.56 0.8 5/6-8.80. 0.875 0.65.000.98.875.65..50.65 0.97.500 0.98 0.75 5/6-8.80. 0.875 0.865.75..50.65..50 5.000 5/8 0.98.750 0.56 0.65 /8-6.90.9.50 0.65.000.98.98.750.75.75.750 0.98.500 0.98 0.65 /8-6.90.9.50 0.865.75...750.75.75 5.5.5.500 0.98 0.750 /-.760.868.500 0.865.75.8.8.50.65.65 5.65 /8.5.50. 0.750 /-.760.868.500 0.990.65.688.688.50.65.65 5.875.5.500 0.98 0.750 /-.0..06 0.865.75.8.8.50.65.65 5.65 -/8.5.50. 0.750 /-.0..06 0.990.65.688.688.50.65.65 5.875.9.500 0.98 0.98 5/8-.00.7.688 0.865.75.8.8.500.875.875 5.875 -/8.9.50. 0.98 5/8-.00.7.688 0.990.65.688.688.500.875.875 6.5 9 800.696.665 www.comoso.com
nd Dimensions -/" to 5" ore MA/MA Series MA nd Dimensions -/" to 5" ore Thread Style (NFPA Style SM) Small Male LAF Thread Style 8 (NFPA Style IM) Intermediate Male LAF A WF VF A WF VF C C ØNA ØMM Ø ØNA ØMM Ø KK D Wrench Flats D Wrench Flats CC D Wrench Flats D Wrench Flats Thread Style 9 (NFPA Style SF) Short Female Thread Style 55 For use with Split Coupler (see page 05 for more information) D Wrench Flats C WF VF ØMM R/6 VF VS ØNA ØMM Ø Ø AM ØMM Ø KK A D Wrench Flats ØAF A AD WG D Wrench Flats Groove Has /6" Internal Radii At Corners nd Dimensions ore -/ -/ -/ 5 Thread +.000 No. Dia. MM Style 8 CC Style & 9 KK A AD A AF AM -.00 C D D LAF NA VF WF WG 5/8 /-0 7/6-0 0.750 0.65 0.50 0.75 0.570. 0.85 /.750 0.56 0.65.000.750 7/8- /-6.5 0.98 0.75 0.688 0.950.99 0.50 7/8 -/8.500 0.98 0.865.75.75 5/8 /-0 7/6-0 0.750 0.65 0.50 0.75 0.570. 0.85 /.750 0.56 0.65.000.750 7/8- /-6.5 0.98 0.75 0.688 0.950.99 0.50 7/8 -/8.500 0.98 0.865.75.75 5/8 /-0 7/6-0 0.750 0.65 0.50 0.75 0.570. 0.85 /.750 0.56 0.65.000.750 7/8- /-6.5 0.98 0.75 0.688 0.950.99 0.50 7/8 -/8.500 0.98 0.865.75.75 7/8- /-6.5 0.98 0.75 0.688 0.950.99 0.50 7/8 -/8.500 0.98 0.865.75.75 -/8 -/ - -.65.06 0.75 0.875.0.999 0.65 -/8-7/8.50. 0.990.65.750 7/8- /-6.5 0.98 0.75 0.688 0.950.99 0.50 7/8 -/8.500 0.98 0.865.75.75 -/8 -/ - -.65.06 0.75 0.875.0.999 0.65 -/8-7/8.50. 0.990.65.750 7/8- /-6.5 0.98 0.75 0.688 0.950.99 0.50 7/8 -/8.500 0.98 0.865.75.75 -/8 -/ - -.65.06 0.75 0.875.0.999 0.65 -/8-7/8.50. 0.990.65.750 Thread Style - Special Thread Special threads, rod extensions, rod eyes, blanks, etc. are also available. To order, specify Style and give desired dimensions for KK or CC, A and W or WF. If otherwise special, please supply dimensioned sketch. 0 800.696.665 www.comoso.com
MA K-type for -/" to 5" ore MA/MA Series To determine dimensions for a double rod end cylinder, first refer to the desired single rod end mounting style cylinder shown in this catalog section. After selecting the necessary dimensions from that drawing, return to this page and supplement the single rod end dimensions with those shown in the drawings and dimension table below. Note that double rod end cylinders have a head dimension G MA K-type for -/" to 5" ore ØMM ØMM WF Y nd # nd # MA K-type for -/" to 5" ore WF Y G ZM + ( X Stroke) LG + Stroke PK + Stroke nd # nd # G ZM + ( X Stroke) LG + Stroke PK + Stroke at both ends, and that LG replaces LF, PK replaces P, etc. The double rod end dimensions differ from, or are in addition to, those for single rod cylinders. When a double rod end cylinder has two different rod ends, please clearly state which rod end is to be available at which head end. G G Mounting Styles for Single Models C C D DD F G J N T T TD T TF Corresponding Mounting Styles for Double Models KC KC KD KDD KF KG KJ KN KT KT KTD KT KTF Double rod cylinders not available with composite piston type. MA/MA C S MNR MAJ/MAJ ACV Cylinder Dimensions K-type ore -/ -/ -/ 5 Dia. Add Stroke Add X Stroke No. MM (NPTF) G WF Y LG PK SAK XAK SSK SNK SK XK ZM 5/8 /8.8.000.875.5.75 6.5 6.5.75.50 6.75 6.50 6.5 /8.8.75.50.5.75 6.500 6.500.75 5.760 5/8 /8.75.000.875.5.75 6.5 6.5.75.50 6.750 6.8 6.5 /8.75.75.50.5.75 6.5 6.500.75.50 6.750 6.8 6.875 5/8 /8..000.98.50.75 6.50 6.50.500.75 7.5 6.688 6.50 /8..75..50.75 6.50 6.65.500.75 7.5 7.06 7.000 /.59.75.8.750.65 7.50 7.75.750.65 7.750 7.65 7.500 -/8 /.59.65.688.750.65 7.50 7.65.750.65 7.750 7.875 8.000 /.59.75.8.750.65 7.50 7.75.750.65 8.000 7.750 7.500 -/8 /.59.65.688.750.65 7.50 7.65.750.65 8.000 8.000 8.000 /.59.75.8.98.8 7.688 7.688.56.8 7.688 -/8 /.59.65.688.98.8 7.688 7.98.56.8 8.88 Replaces Dimension LF P SA XA SS SN S X On Single Mounting Styles All Styles C C TF, F G All 800.696.665 www.comoso.com
Dimensions -/" to 5" ore MA/MA Series Head Rectangular Flange Style J (NFPA MF) R UF F Holes LA W L + Stroke TF F ZJ + Stroke Note: Style J has a W dimension instead of WF and a LA dimension instead of LAF because of the flange installation. Please use dimensions W and LA regarding rod ends only for Style J. For reference, WF = W + F and LA = W + A. Cap Rectangular Flange Style H (NFPA MF) UF F Holes R ZJ + Stroke ZF + Stroke F TF Cylinder Dimensions Styles J and H ore -/ -/ -/ 5 No. Dia. MM A F F LA R TF UF W Add Stroke L ZF ZJ 5/8 0.750.000 0.75 0..75.0.750.75 0.65.000 5.000.65.5.000 0.75 0..5.0.750.75.000.000 5.75 5.000 5/8 0.750.500 0.75 0.75.75.80.75.5 0.65.000 5.000.65.5.500 0.75 0.75.5.80.75.5.000.000 5.75 5.000 5/8 0.750.000 0.75 0.75.75.90.875.65 0.65.5 5.5.750.5.000 0.75 0.75.5.90.875.65.000.5 5.500 5.5.5.750 0.65 0.8.875.760.688 5.500 0.750.875 6.50 5.65 -/8.65.750 0.65 0.8.65.760.688 5.500.000.875 6.500 5.875.5.500 0.65 0.8.875.0 5.8 6.50 0.750.875 6.50 5.65 -/8.65.500 0.65 0.8.65.0 5.8 6.50.000.875 6.500 5.875.5 5.500 0.65 0.56.875.00 6.65 7.65 0.750 5.5 6.500 5.875 -/8.65 5.500 0.65 0.56.65.00 6.65 7.65.000 5.5 6.750 6.5 800.696.665 www.comoso.com
Dimensions -/" to 5" ore MA/MA Series Tie s xt. Head nd Style T (NFPA MX) DD K R ZJ + Stroke MA/MA Tie s xt. Cap nd Style TC (NFPA MX) Tie s xt. oth nds Style TD (NFPA MX) R R DD ZJ + Stroke ZJ + Stroke DD K DD K C S MNR MAJ/MAJ ACV Cylinder Dimensions Styles T, TC and TD ore -/ -/ -/ 5 No. Dia. MM DD K R Add Stroke ZJ 5/8.000 /-8.000 0.50.0.65.000 /-8.000 0.50.0 5.000 5/8.5 5/6-.500 0..80.65.5 5/6-.500 0..80 5.000 5/8.5 5/6-.000 0..90.750.5 5/6-.000 0..90 5.5.75 /8-.750 0.75.760 5.65 -/8.75 /8-.750 0.75.760 5.875.75 /8-.500 0.75.0 5.65 -/8.75 /8-.500 0.75.0 5.875.8 /-0 5.500 0.8.00 5.875 -/8.8 /-0 5.500 0.8.00 6.5 800.696.665 www.comoso.com
Dimensions -/" to 5" ore MA/MA Series Side Lug Style C for MA (NFPA MS) LH S Holes ST SW SW ST SW SW TS XS SS + Stroke US ZJ + Stroke Side Lug Style C for MA/ML (NFPA MS) S Holes LH ±.00 SW SW SW TS US ST SW XS SW SS + Stroke ZJ + Stroke SW Cylinder Dimensions Style C ore -/ -/ -/ 5 No. Dia. MM LH S ST ST ST SW SW TS US XS Add Stroke SS ZJ 5/8.000 0.99 0.8 0.500.000 0.0 0.75 0.95.750.500.75.875.65.000 0.99 0.8 0.500.000 0.0 0.75 0.95.750.500.750.875 5.000 5/8.500. 0.8 0.500.50 0.0 0.75 0.95.50.000.75.875.65.500. 0.8 0.500.50 0.0 0.75 0.95.50.000.750.875 5.000 5/8.000.9 0.8 0.500. 0.0 0.75 0.95.750.500.75.000.750.000.9 0.8 0.500. 0.0 0.75 0.95.750.500.750.000 5.5.750.868 0.56 0.750.500 0.88 0.500 0.688.750 5.750.875.50 5.65 -/8.750.868 0.56 0.750.500 0.88 0.500 0.688.750 5.750.5.50 5.875.500. 0.56 0.750.500 0.88 0.500 0.688 5.500 6.500.875.50 5.65 -/8.500. 0.56 0.750.500 0.88 0.500 0.688 5.500 6.500.5.50 5.875 5.500.7 0.8.000.500 0.50 0.688 0.98 6.875 8.50.06.5 5.875 -/8 5.500.7 0.8.000.500 0.50 0.688 0.98 6.875 8.50..5 6.5 800.696.665 www.comoso.com
Dimensions -/" to 5" ore MA/MA Series Side nd Angle* Style C (NFPA MS) ZA + Stroke XA + Stroke Note: Dim S Is For The Holes In The Mount (Not The Screw To Screw Dim) Cylinder Dimensions Style C ore -/ -/ -/ 5 No. Side nd Lug Style G (NFPA MS7) GH T R S T T AH AT AO O AL A M AT F SA + Stroke *Maximum recommended pressure for this mount is 50 PSIG Dia. MM A A AH AL AL AO AT F S Z + Stroke X + Stroke (Note: Mtg Hole To ) S + Stroke (Note: Mtg Hole To Mtg Hole) AL L A 6Holes AO Add Stroke SA XA ZA 5/8 0.8.75.88.000.000 0.75 0.5.000 0.75.50 6.000 5.65 6.000 0.8.75.88.000.000 0.75 0.5.000 0.75.50 6.000 6.000 6.75 5/8 0.8.75.8.000.000 0.75 0.5.500 0.75.750 6.000 5.65 6.000 0.8.75.8.000.000 0.75 0.5.500 0.75.750 6.000 6.000 6.75 5/8 0.8.75.65.000.000 0.75 0.5.000 0.75.50 6.5 5.750 6.5 0.8.75.65.000.000 0.75 0.5.000 0.75.50 6.5 6.5 6.500 0.56.875.98.50.50 0.500 0.5.750 0.65.750 7.75 6.875 7.75 -/8 0.56.875.98.50.50 0.500 0.5.750 0.65.750 7.75 7.5 7.65 0.56.50.875.50 0.500 0.5.500.500 7.75 6.875 7.75 -/8 0.56.50.875.50 0.500 0.5.500.500 7.75 7.5 7.65 0.688.000.750.75.75 0.65 0.88 5.500 0.65.50 7.875 7.50 7.875 -/8 0.688.000.750.75.75 0.65 0.88 5.500 0.65.50 7.875 7.500 8.5 O MA/MA C S MNR MAJ/MAJ ACV Cylinder Dimensions Style G ore -/ -/ -/ No. Dia. MM L M O T GH R Add Stroke S X Z 5/8.000 0.8 0.750.5 0.50 0.56 0.99.0 5.500 5.75 5.65 5/8.500 0. 0.98. 0. 0.688..80 5.875 5.56 5.875.500 0. 0.98. 0. 0.688..80 5.875 5.98 6.50 5/8.000 0..06.8 0. 0.8.9.90 6.50 5.8 6.5.000 0..06.8 0. 0.8.9.90 6.50 6.88 6.500.750 0.06 0.875.500 0.75.000.868.760 6.65 6.500 6.875 -/8.750 0.06 0.875.500 0.75.000.868.760 6.65 6.750 7.5.500 0.06.000.65 0.75.88..0 6.875 6.65 7.000 -/8.500 0.06.000.65 0.75.88..0 6.875 6.875 7.50 5 800.696.665 www.comoso.com
Dimensions -/" to 5" ore MA/MA Series ase ar Mount Style N for MA LH A Holes ST SW TS US SW XS SU SS + Stroke ZJ + Stroke SU SW ase ar Mount Style N for MA LH A Holes ±.005 ST SW TS US SW XS SU SS + Stroke ZJ + Stroke SU SW Note: Fasteners for N base bar mount have been applied with removable threadlocking compound and torqued to bottom of endcaps. Cylinder Dimensions Style N ore -/ -/ -/ No. Dia. MM A LH ST SU SW TS US XS Add Stroke SS ZJ 5/8 0.8.000. 0.50.5 0.75.750.500.75.875.65 5/8 0.8.500.9 0.50.5 0.75.50.000.75.875.65 0.8.500.9 0.50.5 0.75.50.000.750.875 5.000 5/8 0.8.000.868 0.75.5 0.75.750.500.75.000.750 0.8.000.868 0.75.5 0.75.750.500.750.000 5.5 0.56.750.68 0.500.50 0.500.750 5.750.875.50 5.65 -/8 0.56.750.68 0.500.50 0.500.750 5.750.5.50 5.875 0.56.500.7 0.500.50 0.500 5.500 6.500.875.50 5.65 -/8 0.56.500.7 0.500.50 0.500 5.500 6.500.5.50 5.875 6 800.696.665 www.comoso.com
Dimensions -/" to 5" ore Cap Fixed Clevis Style (NFPA MP) MA/MA Series Note: For maximum swivel angle of mount with rear mounting plate, see Cylinder Accessories on page 08. ØCD LR MR XC + Stroke ZC + Stroke F L CW CW C MA/MA Cap Detachable Clevis Style C (NFPA MP) Cap Detachable ye* Style (NFPA MP) XD + Stroke ZD + Stroke XD + Stroke ZD + Stroke F F L L ØCD MR ØCD MR CW CW C C C S MNR MAJ/MAJ ACV Cylinder Dimensions Styles, C and ore -/ -/ -/ 5 No. Dia. MM C +.000 +.00 -.00 +.00 CD CD CW F L LR L MR MR MR *Not available for 5" bore MA, please specify MA Add Stroke XC XD ZC ZD ZD 5/8 0.750 0.50 0.500 0.500.000 0.75 0.75 0.750 0.750 0.65 0.500 0.65 5.75 5.750 6.000 6.50 6.75 0.750 0.50 0.500 0.500.000 0.75 0.75 0.750 0.750 0.65 0.500 0.65 5.750 6.5 6.75 6.65 6.750 5/8 0.750 0.50 0.500 0.500.500 0.75 0.75 0.750 0.750 0.65 0.500 0.65 5.75 5.750 6.000 6.50 6.75 0.750 0.50 0.500 0.500.500 0.75 0.75 0.750 0.750 0.65 0.500 0.65 5.750 6.5 6.75 6.65 6.750 5/8 0.750 0.50 0.500 0.500.000 0.75 0.75 0.750 0.750 0.65 0.500 0.688 5.500 5.875 6.5 6.75 6.56 0.750 0.50 0.500 0.500.000 0.75 0.75 0.750 0.750 0.65 0.500 0.688 5.875 6.50 6.500 6.750 6..50 0.75 0.750 0.65.750 0.65 0.65.000.50 0.98 0.750 0.875 6.875 7.500 7.8 8.50 8.75 -/8.50 0.75 0.750 0.65.750 0.65 0.65.000.50 0.98 0.750 0.875 7.5 7.750 8.06 8.500 8.65.50 0.75 0.750 0.65.500 0.65 0.65.000.50 0.98 0.750 0.875 6.875 7.500 7.8 8.50 8.75 -/8.50 0.75 0.750 0.65.500 0.65 0.65.000.50 0.98 0.750 0.875 7.5 7.750 8.06 8.500 8.65.50 0.75 0.750 0.65 5.500 0.65 0.65.000.50 0.98 0.750 0.875 7.5 7.750 8.06 8.500 8.65 -/8.50 0.75 0.750 0.65 5.500 0.65 0.65.000.50 0.98 0.750 0.875 7.75 8.000 8. 8.750 8.875 7 800.696.665 www.comoso.com
MA/MA Series (Revised 08-5-) Catalog 0900P- Dimensions -/" to 5" ore Head Trunnion* Style D (only for MA/ML) (NFPA MT) UT ØTD TL XG ZJ + Stroke TL *Not available for -/" bore with " rod Cap Trunnion Style D (only for MA/ML) (NFPA MT) UT ØTD TL Intermediate Trunnion Style DD (NFPA MT) XJ + Stroke ZJ + Stroke TL UM D UV ØTD TL TL XI TM ZJ + Stroke Cylinder Dimensions Styles D, D and DD ore / -/ -/ 5 No. Dia. MM 5/8.000 5/8 Note: Tie rod nuts for Style DD have a slot instead of internal hex. D +.000.00 TD Add Stroke TL TM UM UT UV.50.000.000.500.500.000.500.000.50.000.000.500.500.000.500.500.000.000.000 5.000.500.500.500.000.000.000 5.000 5/8.000.500.000.000.500.000.500.000.000.750.000.000 -/8.750.000.500 -/8 XG Min. XI XJ ZJ.750.06.5.65.500.7.50 5.000.000.750.5.5.65.500.000.5.500.500 5.000 5.500 5.000.500.750.09.50.750.500 5.500 5.000.500.5.69.65 5.5.000.500 6.500 5.750.50.50.969 5.000 5.65.000.000.500 6.500 5.750.50.500.9 5.50 5.875.000.000.000 5.50 7.50 6.500 5.000.50.969 5.000 5.65.500.000.000.000 5.50 7.50 6.500 5.000.500.9 5.50 5.875 5.500.000.000.000 6.50 8.50 7.500 6.000.50.969 5.50 5.875 -/8 5.500.000.000.000 6.50 8.50 7.500 6.000.500.9 5.500 6.5 8 800.696.665 www.comoso.com
MA Features 6" and 8" ore MA Series 6" and 8" ore Piston Standard case-hardened (50-6 Rc), hard chrome plated and polished carbon steel piston rod for reliable performance, long rod seal life and low friction. Grades of stainless steel are available as options. Wiper Outboard urethane rod wiper protects the cylinder by removing external debris and adherents from the piston rod during the entire stroke. Heads and Caps High-strength aluminum heads and caps are anodized for corrosion resistance. We can offer customization of the endcaps for unique designs, including extra ports, duplex, tandem and many special mountings. Piston Seals (hidden) Carboxylated nitrile rounded-lip piston seals combine low friction with leak-free service and long service life. Gland/earing Threaded bronze rod gland is externally removable, without cylinder disassembly, for easy maintenance. Machined flats permit the use of common tools for removal and installation. s include HI LOAD design for side load conditions and metallic wiper design for extremely tough rod contaminant/ adherent applications. Piston Assembly (hidden) Aluminum piston with wear band increases service life and eliminates metalto-metal contact. al magnetic piston ring for use with a variety of sensors. Anaerobic adhesive is used to permanently lock and seal the piston to the rod. Tie Construction Steel tie rods and nuts for heavy-duty use. Stainless steel is available as an option. Ports NPTF ports are standard. Other port styles available. Adjustable Cushions Available Cylinder ody Hard anodized aluminum for corrosion resistance, maximum seal life and lower friction. MA/MA C S MNR MAJ/MAJ ACV Seal (hidden) Carboxylated nitrile rounded-lip rod seal combines low friction with leakfree service and long service life. For a complete list of MA options, please see pages 0 and. 9 800.696.665 www.comoso.com
MA Model Code 6" and 8" ore MA Series 6" and 8" ore 6.00 ore 6.00 8.00 Double Cylinder Specify K only if double rod cylinder is required. Cushion Head nd lank Non-cushioned head end C Cushioned head end (not available for ML) How to Order MA Series Cylinders for 6" and 8" ore MA cylinders can be specified by model number by using the table below. J MA U A.000 Mounting Style Specify mounting style code (see table on following page). Series MA Air service ML Hydraulic service Piston Type lank Standard (lipseals, no magnetic ring) Lipseals and magnetic ring Ports U NPTF R SPP SPT T SA Reed and solid-state sensors only available with standard seals or options and M. Used for external chemical compatibility applications, not high temperature. If fluorocarbon seals are required with this option, please place an S for special in the Special Modification field and specify the fluorocarbon seals and metallic rod wiper in the item notes. For Linear Position Sensor (), please include the following information for the Special Modification item notes: a. Sensor part number (see pages 00-0) b. Sensor position c. Port position (if other than position ) d. Length of stop tubing, gross stroke and net stroke (if required) Also, Piston Type is required. 5 Review Piston Selection Chart on page A to determine proper piston rod diameter. 6 For additional information regarding this style, refer to page 05. If non-standard Material and Gland Code is required with this option, please place an S for special in Special Modification field and specify Material and Gland Code in the item notes. 7 Not available for ML. 8 If a stop tube is required, specify gross stroke (net stroke + stop tube) in the model number, then place an S for special in the Special Modification field and specify the stop tube length in the item notes. Seals lank Standard (nitrile seals) V Fluorocarbon seals Fluorocarbon rod wiper and rod seal only Low temperature seals M Metallic rod wiper, nitrile seals Piston Number Specify rod code number for required diameter. 5 Special Modification Specify S only for special modification other than rod end, and then describe modification in item notes. (Includes MA with Linear Position Sensor ) Piston Thread Style Small male 8 Intermediate male 9 Short female 55 For use with Split Coupler 6 Special (and specify all dimensions required) Stroke Length Specify stroke length required in inches. 8 Cushion Cap nd lank Non-cushioned cap end C Cushioned cap end (not available for ML) Piston Thread Type A Standard (UNF Unified Thread) W SF ritish Fine M Metric (see page 06) Material and Gland Code lank Standard rod and gland H Standard rod and HI LOAD gland Y 7- PH stainless steel rod and standard gland Z 7- PH stainless steel rod and HI LOAD gland J 0 stainless steel rod and standard gland 7 K 0 stainless steel rod and HI LOAD gland 7 S 6 stainless steel rod and standard gland 7 T 6 stainless steel rod and HI LOAD gland 7 How to order 6"-8" ore MA/ML Series cylinders with sensors: Sensors must be ordered separately and are not mounted to the cylinder prior to shipment.. Cylinder model number must have Piston Type.. Please refer to pages M-M9 for sensor part numbers and specifications. Global, NAMUR and Weld Immune Sensors will fit the 6"-8" ore MA/ML Series.. Tie rod bracket P8S-TMA0X will be required for Global Sensors. Please refer to page M9 for more information. 0 800.696.665 www.comoso.com
MA Series Mounting Styles MA Series 6" and 8" ore MA Series Mounting Styles 6" and 8" ore NFPA Available ore s Mounting Mounting MA/ML- MA/ML- Code Style Description MA/ML w/o Stop Tube w/stop Tube T MX0 No Mount 6-8 6-8 6-8 J MF Head Rectangular Flange 6 6* 6 H MF Cap Rectangular Flange 6 6* 6* T MX Tie s xtended Head nd 6-8 - 6-8 TC MX Tie s xtended Cap nd 6-8 - - TD MX Tie s xtended oth nds 6-8 - - T MX5 Sleeve Nut 6-8 6-8 6-8 TF MX5/MS Sleeve Nut with Side Tap 6-8 6-8 6-8 C MS Side Lug 6-8 6-8 6-8 F MS Side Tap 6-8 6-8 6-8 C MS Side nd Angle 6-8 6-8 6-8 MP Cap Fixed Clevis 6-8 6-8* 6-8* C MP Cap Detachable Clevis 6-8 6-8* 6-8* MP Cap Detachable ye 6 6* 6* D MT Head Trunnion 6-8 6-8 6-8 D MT Cap Trunnion 6-8 6-8* 6-8* DD MT Intermediate Trunnion 6-8 - - J M Head Square 8-8 H M Cap Square 8 - - KT** MDX0 Double nd, No Mount 6-8 6-8 6-8 * May interfere with mounting. Please provide clearance for Linear Position Sensor overhang (see page 0). ** Double rod end cylinders can be ordered with head mountings, i.e. KJ (see page 7). No Mount Head Rectangular Flange Cap Rectangular Flange Tie s xt. Head nd (NFPA MX0) Tie s xt. Cap nd (NFPA MX) Side Tap Style T Style TC Style F (NFPA MF) Tie s xt. oth nds (NFPA MX) Side nd Angle Style J Style TD Style C (NFPA MF) Sleeve Nut (NFPA MX5) Cap Fixed Clevis Style H Style T Style (NFPA MX) Side Lug (NFPA MS) Cap Detachable Clevis Style T Style C Style C MA/MA C S MNR MAJ/MAJ ACV (NFPA MS) Cap Detachable ye (NFPA MS) Head Trunnion (NFPA MP) Cap Trunnion (NFPA MP) Intermediate Trunnion Style Style D Style D Style DD (NFPA MP) (NFPA MT) (NFPA MT) (NFPA MT) Head Square Cap Square Double nd Style KT Style J Style H (NFPA M) (NFPA M) (NFPA MDX0) 800.696.665 www.comoso.com
Catalog 0900P- MA and ML General Specifications General Specifications NFPA interchangeable ore sizes 6" and 8" Strokes available in any practical stroke length diameters -/8" and -/" end styles standard, specials available Single rod end or double rod ends Cushions optional and adjustable at either end or both ends (n/a for ML Hydraulic Version) Operating pressure MA = 50 PSIG (7 ar) maximum air service ML = 00 PSIG (7 ar) maximum hydraulic service MA Series 6" and 8" ore Media MA = dry, filtered air ML = filtered hydraulic oil Temperature range -0 F to +65 F (- C to +7 C) with standard seals -0 F to +50 F (- C to + C) with fluorocarbon seals option -50 F to +50 F (-6 C to +66 C) with low temperature seals option Mounting styles 0 standard styles RoHS compliant For material options, including seals, piston rods and glands, please see Material Specifications on next page. Cylinder Weights MA/ML Cylinders Standard Cushion Position ore (inch) 6 8 (inch) No Mount Single MA/ML ase Wt. (lbs.) Per Inch (lbs.) No Mount Double ase Wt. (lbs.) Per Inch (lbs.).75 0.50 0.87 5.65.0.75.6. 0..8.75 5.50.5.5.68.75 7.6.5 5.90.0 Mounting Code Position All except D, D, DD D, D, DD Standard Port s ore NPTF SPT SPP SA Mounting Weight Adders ore Weight (lbs) by Mounting Style (inch) J, H D, D C DD C C 6 0.7..9 5.88 5.5.9 0.69.8 8 N/A..9 7.8 5.0 N/A 0.67 7. 6 / Rc/ G/ 8 / Rc/ G/ 800.696.665 www.comoso.com
MA and ML Material Specifications MA Series 6" and 8" ore Material Specifications Standard Temperatures and Applications Head and cap...lack anodized aluminum alloy Piston fastener...piston rod for aluminum piston Cylinder body...clear hard-coat anodized O-rings...Nitrile aluminum alloy nd seals...nitrile Piston rod...case-hardened, chrome Cushion seals...urethane plated carbon steel Cushion needle valves...rass cushion needle valves seal...carboxylated nitrile (Nitroxile) Tie-rods...lackened carbon steel wiper...molythane Tie-rod nuts...steel alloy, SA J995 Grade 8 bearing (gland)...ronze alloy Piston...Aluminum alloy Piston seals...carboxylated nitrile (Nitroxile) Piston bearing...molygard Magnetic ring...plastic-bound magnetic material MA s Material and Part Changes High temperatures All seals and wiper are (-0 F to +50 F) fluorocarbon Aluminum piston only (without magnetic ring) ML Hydraulic Version Material and Part Changes Hydraulic service Cushions not available Hydraulic service (general) (high temp) Hydraulic service (std temp) Polyurethane TS-000 rod seal and nitrile piston seals (for hydraulic use) Low temperatures (-50 F to +50 F) Other Standard s Material and Part Changes Cylinder seal options Fluorocarbon for high temperatures or chemical compatibility Other seal options available, please consult factory HI LOAD gland option Metallic rod scraper option seal, piston seals, o-rings and end seals are low temperature-rated nitrile Fluorocarbon TS-000 rod seal; wiper and all seals are fluorocarbon (for hydraulic use) Composite bearing pressed into bronze alloy gland Dual high strength bronze wipers with fluorocarbon energizer MA/MA C S MNR MAJ/MAJ ACV Piston rod material options Case-hardened, chrome plated carbon steel (standard) 7- PH stainless steel, chrome plated 0 stainless steel, chrome plated (n/a for ML) 6 stainless steel, chrome plated (n/a for ML) (for stainless steel without chrome plating, please consult factory) 800.696.665 www.comoso.com
Cylinder Selection MA Series 6" and 8" ore How to Select a 6" - 8" ore MA Cylinder Parker cylinders are available based on air or hydraulic operating pressure. The many styles, sizes and optional features available assure that your application requirements are precisely met. To select a cylinder, follow these simple steps: Step - Determine the correct cylinder bore size necessary to achieve required force using the available operating pressure. Step - Determine the series cylinder to use, based on operating pressure. Step - Turn to the appropriate cylinder selection section. Select the mounting style that fits your installation needs. Determine the bore and rod sizes available for the model you select. Then complete model selection. - Choose a rod end style and the desired rod end accessories. - the cylinder to meet your application requirements. Step - Consider the following conditions which may require further modifications to the cylinder you have selected. Application Condition Quick Starts or Stops Long Push Stroke High-column Loading Long Push Stroke Long Horizontal Stroke High Operating Temperatures Check the Following Confirm that determined thrust is sufficient to accelerate or decelerate cylinder and load within prescribed distance. al cushions should be used to reduce shock during deceleration, check that peak pressures will be within tolerable limits. Check whether stop tube is required to prevent excessive bearing loads and wear. Determine if standard size piston rod is strong enough to accommodate intended load. See Application ngineering section for recommendations. Determine if standard size piston rod is strong enough to accommodate intended load. For temperatures between 65 F and 50 F use MA cylinder with high temperature seals. General s and Modifications: Adjustable Cushions Magnetic Piston Port and Adjustable Cushion Relocation Port Thread Styles Multiple Ports Special Heads, Caps, Pistons and Mounts Double nd Oversize Diameters nd Modifications Materials (grades of stainless steel) Stainless Steel Tie s and Nuts Fluorocarbon Wiper and Seal only Fluorocarbon Seals (all cylinder seals) Metallic Wiper HI LOAD Gland Assembly Stop Tube Mixed Mountings Shock Absorber on Cap nd Air Cylinder/Valve Combination (ACV) Adjustable Point Sensors (order separately) Continuous Linear Position Sensing () High Temperature Service (to +50 F) Low Temperature Service (to -50 F) Hydraulic Service (ML) (00 PSIG) lock version (see MAJ) 800.696.665 www.comoso.com
MA Series Single Dimensions MA Series 6" and 8" ore MA Series Single Dimensions 6" and 8" ore A LAF WF VF C Y ØNA KK or CC D Wrench Flats ØMM D Wrench Flats Ø MA/MA For dimensions of all standard rod end styles, please see page 6. R ØMM WF G P+Stroke LF + Stroke ZJ + Stroke J K C S MNR MAJ/MAJ ACV Cylinder Dimensions Style T ore 6 8 Thread +.000 No. Dia. MM Style 8 CC Style & 9 KK A AA -.00 C D D (NPTF) G -/8 -/ - -.65 6.900.999 0.65 -/8-7/8 6.500 /.90 -/ -/ - -/ -.000 6.900.7 0.760 -/ -/6 6.500 /.90 -/8 -/ - -.65 9.00.999 0.65 -/8-7/8 8.500 /.80 -/ -/ - -/ -.000 9.00.7 0.760 -/ -/6 8.500 /.80 ore 6 8 No. Dia. MM J K LAF NA R VF WF Y Add Stroke LF P ZJ -/8.0 0.8.50..880 0.990.65.8 5.000.5 6.65 -/.0 0.8.875.688.880.5.875.06 5.000.5 6.875 -/8.0 0.56.50. 6.0 0.990.65.750 5.5.50 6.750 -/.0 0.56.875.688 6.0.5.875.000 5.5.50 7.000 5 800.696.665 www.comoso.com
nd Dimensions 6" and 8" ore MA Series 6" and 8" ore MA nd Dimensions 6" and 8" ore s Thread Style (NFPA Style SM) Small Male LAF Thread Style 8 (NFPA Style IM) Intermediate Male LAF A WF VF A WF VF C C ØNA ØMM Ø ØNA ØMM Ø KK D Wrench Flats D Wrench Flats CC D Wrench Flats D Wrench Flats Thread Style 9 (NFPA Style SF) Short Female Thread Style 55 For use with Split Coupler (see page 05 for more information) D Wrench Flats C WF VF ØMM R/6 VF VS ØNA ØMM Ø Ø AM ØMM Ø KK A D Wrench Flats ØAF A AD WG D Wrench Flats Groove Has /6" Internal Radii At Corners nd Dimensions ore 6 8 Thread +.000 No. Dia. MM Style 8 CC Style & 9 KK A AD A AF AM -.00 C D D LAF NA VF WF WG -/8 -/ - -.65.06 0.75 0.875.0.999 0.65 -/8-7/8.50. 0.990.65.750 -/ -/ - -/ -.000. 0.500.5.700.7 0.760 -/ -/6.875.688.5.875.5 -/8 -/ - -.65.06 0.75 0.875.0.999 0.65 -/8-7/8.50. 0.990.65.750 -/ -/ - -/ -.000. 0.500.5.700.7 0.760 -/ -/6.875.688.5.875.5 Thread Style - Special Thread Special threads, rod extensions, rod eyes, blanks, etc. are also available. To order, specify Style and give desired dimensions for KK or CC, A and W or WF. If otherwise special, please supply dimensioned sketch. 6 800.696.665 www.comoso.com
MA K-type / nds 6" and 8" ore To determine dimensions for a double rod end cylinder, first refer to the desired single rod end mounting style cylinder shown in this catalog section. After selecting the necessary dimensions from that drawing, return to this page and supplement the single rod end dimensions with those shown in the drawings and dimension table below. Note that double rod end cylinders have a head dimension MA Series 6" and 8" ore G at both ends, and that LG replaces LF, PK replaces P, etc. The double rod end dimensions differ from, or are in addition to, those for single rod cylinders. When a double rod end cylinder has two different rod ends, please clearly state which rod end is to be available at which head end. MA Series K-type Drawing 6" and 8" ore ØMM WF Y ZM + ( x Stroke) nd # nd # Cylinder Dimensions Style KT ore 6 8 G LG + Stroke PK + Stroke G K Mounting Styles for Single Models C C D DD F J T T TD T TF Corresponding Mounting Styles for Double Models KC KC KD KDD KF KJ KT KT KTD KT KTF Dia. Add Stroke Add X Stroke No. MM (NPTF) G K WF Y LG PK SAK XAK SSK SNK ZM -/8 /.90 0.8.65.8 5.500.5 8.50 8.500.5.5 8.750 -/ /.90 0.8.875.06 5.500.5 8.50 8.750.5.5 9.50 -/8 /.80 0.56.65.750 5.500.50 9.5 8.98.5.5 8.750 -/ /.80 0.56.875.000 5.500.50 9.5 9.88.5.5 9.50 Replaces Dimension LF P SA XA SS SN On Single Mounting Styles All Styles C C F, TF All MA/MA C S MNR MAJ/MAJ ACV 7 800.696.665 www.comoso.com
Dimensions 6" and 8" ore MA Series 6" and 8" ore Head Rectangular Flange Style J (NFPA MF) (only 6" ore) UF F Holes W ZJ + Stroke R LA F L + Stroke TF Note: Style J has a W dimension instead of WF and a LA dimension instead of LAF because of the flange installation. Please use dimensions W and LA regarding rod ends only for Style J. For reference, WF = W + F and LA = W + A. Cap Rectangular Flange Style H (NFPA MF) (only 6" ore) L+Stroke UF F Holes R ZJ + Stroke ZF + Stroke F TF Cylinder Dimensions Styles J and H ore 6 No. Dia. MM A F F LA R TF UF W Add Stroke L ZF ZJ -/8.65 6.500 0.750 0.56.500.880 7.65 8.65 0.875 5.750 7.75 6.65 -/.000 6.500 0.750 0.56.5.880 7.65 8.65.5 5.750 7.65 6.875 8 800.696.665 www.comoso.com
Dimensions 6" and 8" ore MA Series 6" and 8" ore Tie s xt. Head nd Style T (NFPA MX) ØAA R DD ZJ + Stroke K MA/MA Tie s xt. Cap nd Style TC (NFPA MX) Tie s xt. oth nds Style TD (NFPA MX) ØAA ØAA R DD ZJ + Stroke K D D C S MNR MAJ/MAJ ACV R ZJ + Stroke K Cylinder Dimensions Styles T, TC and TD ore 6 8 No. Dia. MM AA DD K R Add Stroke ZJ -/8 6.900.8 /-0 6.500 0.8.880 6.65 -/ 6.900.8 /-0 6.500 0.8.880 6.875 -/8 9.00. 5/8-8 8.500 0.56 6.0 6.750 -/ 9.00. 5/8-8 8.500 0.56 6.0 7.000 9 800.696.665 www.comoso.com
Dimensions 6" and 8" ore MA Series 6" and 8" ore Sleeve Nut Style T (NFPA MX5) AA DD Thread, G Deep, 8 Places R G ZJ + Stroke G Cylinder Dimensions Style T ore 6 8 No. Dia. MM AA G DD R Add Stroke ZJ -/8 6.900 0.500 /-0 6.500.880 6.65 -/ 6.900 0.500 /-0 6.500.880 6.875 -/8 9.00 0.60 5/8-8 8.500 6.0 6.750 -/ 9.00 0.60 5/8-8 8.500 6.0 7.000 0 800.696.665 www.comoso.com
Dimensions 6" and 8" ore MA Series 6" and 8" ore Side Lug Style C (NFPA MS) Cylinder Dimensions Style C ore 6 8 Side Tap Style F (NFPA MS) No. Dia. MM LH±.00 SW SW SW SW TS US DD S Holes ST +/-.00 LH S ST SW TS US XS TH ±.00 XS SW SW SS + Stroke ZJ + Stroke Add Stroke -/8 6.500. 0.8.000 0.688 7.875 9.50..65 6.65 -/ 6.500. 0.8.000 0.688 7.875 9.50.56.65 6.875 -/8 8.500. 0.8.000 0.688 9.875.50..750 6.750 -/ 8.500. 0.8.000 0.688 9.875.50.56.750 7.000 SS ZJ MA/MA C S MNR MAJ/MAJ ACV TN NT Thread, ND Deep Tapped Mounting Holes XT SN + Stroke ZJ + Stroke Cylinder Dimensions Style F ore 6 8 No. Dia. MM ND NT +/-.00 TH TN XT SN Add Stroke -/8 6.500.5 /-0..50.8.5 6.65 -/ 6.500.5 /-0..50.06.5 6.875 -/8 8.500.5 /-0..500.8.50 6.750 -/ 8.500.5 /-0..500.06.50 7.000 ZJ 800.696.665 www.comoso.com
Dimensions 6" and 8" ore MA Series 6" and 8" ore Side nd Angle* Style C (NFPA MS) AH ZA + Stroke XA + Stroke A 6 Holes AT S Note: Dim. S Is For The Holes In The Mount (Not The Tie To Tie Dim.) AO AL A AT F SA + Stroke AL AO *Maximum recommended pressure for this mount is 50 PSIG Cylinder Dimensions Style C ore 6 8 No. Dia. MM A A AH AL AO AT F S Add Stroke SA XA ZA -/8 0.8.5.50.75 0.65 0.88 6.500 0.750 5.50 8.500 8.000 8.65 -/ 0.8.5.50.75 0.65 0.88 6.500 0.750 5.50 8.500 8.50 8.875 -/8 0.8.8.50.8 0.688 0.50 8.500 7.5 8.750 8.56 9.50 -/ 0.8.8.50.8 0.688 0.50 8.500 7.5 8.750 8.8 9.500 800.696.665 www.comoso.com
Dimensions 6" and 8" ore Cap Fixed Clevis Style (NFPA MP) MA Series 6" and 8" ore Note: For maximum swivel angle of mount with rear mounting plate, see Cylinder Accessories on page 08. ØCD LR MR XC + Stroke ZC + Stroke F L CW C CW MA/MA Cap Detachable Clevis Style C (NFPA MP) Cylinder Dimensions Styles and C ore 6 8 XD + Stroke ZD + Stroke +.000 Add Stroke No. Dia. MM C -.00 CD CW F L LR L MR MR XC XD ZC ZD - /8.500.00 0.750 6.500 0.750 0.750.50.500.5.000 8.5 8.875 9.50 9.875 -/.500.00 0.750 6.500 0.750 0.750.50.500.5.000 8.75 9.5 9.500 0.5 -/8.500.00 0.750 8.500 0.750 0.750.50.500.5.000 8.50 9.000 9.75 0.000 -/.500.00 0.750 8.500 0.750 0.750.50.500.5.000 8.500 9.50 9.65 0.50 ØCD F L MR CW C CW C S MNR MAJ/MAJ ACV Cap Detachable ye Style (NFPA MP) ØCD MR Cylinder Dimensions Style ore 6 XD + Stroke ZD + Stroke +.00 Add Stroke No. Dia. MM C +.00 CD F L MR XD ZD -/8.500.000 6.500 0.750.500.5 8.875 0.000 -/.500.000 6.500 0.750.500.5 9.5 0.50 F L C 800.696.665 www.comoso.com
Dimensions 6" and 8" ore MA Series 6" and 8" ore Head Trunnion Style D (NFPA MT) ØTD TL UT TL XG ZJ + Stroke Cap Trunnion Style D (NFPA MT) ØTD XJ ZJ + Stroke TL UT TL Intermediate Trunnion Style DD (NFPA MT) D UV ØTD TL TM TL UM XI ZJ + Stroke Cylinder Dimensions Style D, D and DD ore 6 8 No. Dia. MM D +.000 -.00 TD TL TM UM UT UV XG Min. XI Add Stroke -/8 6.500.500.75.75 7.65 0.75 9.50 7.000.65.8 5.875 6.65 -/ 6.500.500.75.75 7.65 0.75 9.50 7.000.875 5.06 6.5 6.875 -/8 8.500.500.75.75 9.750.500.50 9.500.65.750 6.000 6.750 -/ 8.500.500.75.75 9.750.500.50 9.500.875 5.000 6.50 7.000 XJ ZJ 800.696.665 www.comoso.com
Dimensions 6" and 8" ore MA Series 6" and 8" ore Head Square Style J (NFPA M) (only 8" ore) T Ø Holes G ZJ + Stroke MA/MA Cap Square Style H (NFPA M) (only 8" ore) Cylinder Dimensions Styles J and H ore 8 No. XK + Stroke Dia. MM G J T J Add Stroke XK ZJ -/8 8.500 0.688.80.0 7.570 5. 6.750 -/ 8.500 0.688.80.0 7.570 5.56 7.000 T Ø Holes C S MNR MAJ/MAJ ACV 5 800.696.665 www.comoso.com
Notes MA -/8" ore 6 800.696.665 www.comoso.com
-/8" ore MA Cylinder Features MA -/8" ore Wiper Outboard urethane rod wiper protects the cylinder by removing external debris and adherents from the piston rod during the entire stroke. earing This composite rod bearing is designed for side load. Wear resistance far exceeds commonly-used bronze rod bearings. Piston Hard chrome plated and polished carbon steel piston rod for reliable performance, long rod seal life and low friction. Grades of stainless steel are available as options. Seal Inboard nitrile rod lipseal combines low friction with leak-free service and long service life. Piston Seals Nitrile piston lipseals combine low friction with leak-free service and long service life. al bumper piston seals provide additional noise reduction and smooth end-of-stroke deceleration. Adjustable Cushion Spacers Available Heads and Caps Steel alloy heads and caps are black zinc-plated for corrosion resistance ndcap Fasteners Zinc-plated steel endcap fasteners (and tie rods for some mounts) for heavy-duty use. Stainless steel is available as an option. Piston Assembly Aluminum piston with wear band increases service life and eliminates metal-to-metal contact. Anaerobic adhesive is used to permanently lock and seal the piston to the rod. Ports /8" NPTF ports are standard. Magnetic Piston Ring Included as a standard feature for use with a variety of sensors. Cylinder ody xtruded aluminum profile cylinder body offers integrated sensor grooves to minimize sensor installation time, maximize sensor protection and eliminate the need for brackets. Grooves readily accept Mini- Global Sensors. Anodized and bright-dipped for corrosion resistance, maximum seal life and lower friction. A few mounts require anodized aluminum tube and steel tie rod construction (tie rod brackets for sensors available). MA/MA C S MNR MAJ/MAJ ACV For a complete list of MA options, please see pages 8 and 5. 7 800.696.665 www.comoso.com