Early Birds Your GM Muscle Car Headquarters 1 800 463 0546 Visit www.early-birds.ca for most up-to-date catalog this copy was generated July 12 2018 GTO / Interior / Seat Parts & Belts Picture Product name Description SKU CAD 1964-1965 GM A Body Bucket Seat Adjuster & Pull Back New 1964-65 GM A body bucket seat adjuster and pull back GTPPZSAS645 Springs springs. This set of springs is for one bucket seat only. 25.99 1964-1965 GM Bucket Seat Hinge Assembly Washer Set - 1964-1965 G.M A body bucket seat hinge assembly washer set. GTREMGTO-MIS-2 8pc These are new made in america compressed cardboard washers 25 that go on both sides of the seat arm and help prevent the seat upholstery from warring at the spot where the seat back attaches to the seat bottom. An important detail item that is often missing. 15.99 1964-1965 GTO Seat Adjustment Knob (with Bucket & Bench This item is a premium product made in the U.S.A Seats). - Priced/Each GTTP2033 40.99 1964-1965 Seat Track Chrome Adjustment Knob New 1964-65 seat track chrome adjustment knob. Chrome GTPPZ457 plated die cast with set screw just like factory fits all GM cars with bucket and bench seats. 20.99 1964-1965 Trunk Divider Board Machine-stamped laminated fiberboard die-cut like the originals. GTREMCVL-TKD-0 05 37.99 1964-1965 Trunk Divider Jute The jute backing is recommended because it provides insulation GTREMCVL-TDJ-0 from noise and moisture. 05 33.99 1964-1966 Front Standard Seat Belts (Black) - PR New 1964-66 GM cars standard front retractable seat belt set in GTPPZSBS646 black with the carriage emblem. 472.99 1964-1966 Seat Belt Bolt (Cadmium Plated) - 1 1/4" New seat belt bolt cadmium plated with 13/16Ó Head and is 1 GTPPZBB63 _Ó long Ð used on front and rear seat belt retractors) 7.99 1964-1966 Seat Belt Bolt (Chrome Plated) - 1 1/2" New seat belt bolt chrome plated fine thread with 13/16" head GTPPZBB64 and is 1 _Ó long 9.99 Early Birds Order Hotline: 1 800 463 0546 Page 1/10
1964-1966 Standard Seat Lap Belt (Front/Rear) New 1964-66 GM cars front or rear seat lap belt in black with GTPPZLB646 carriage emblem. 125.99 1964-1972 20 Webbing Chrome Push Buckle (Black) GTDSB-20FLP 24.00 1964-1972 90 Degree End Bracket GTDSB-90BR 7.00 1964-1972 Bucket Seat Conversion Brackets Convert bucket seats to mount where a bench seat was removed GTPGBMB0001 with these quality, easy-to-install brackets. A pair includes 2 bucket seat brackets and mounting hardware. 47.99 1964-1972 Oval Seatback Bumpers (w/insert) - PR Includes steel inserts and screwsñone pair per seat (two pairs for GTPGSB8200 bucket seats, one pair for bench). Replace old bumpers that allow your seats to lean back too far, causing breaking and bending of the seat hinges and frame. 1964-1972 Oval Seatback Bumpers (w/o insert) - PR One pair per seat (two pairs for bucket seats, one pair for bench). GTFSSB65 Replace old bumpers that allow your seats to lean back too far, causing breaking and bending of the seat hinges and frame. 9.99 1964-1972 POWER BUCKET SEAT BRACKET Factory set of brackets. If you are installing a power bucket seat GTPPIN6680Z in your 1964 / 1965 / 1966 / 1967 / 1968 / 1969 / 1970 / 1971 / 1972 GM Chevelle / El Camino / Cutlass / 442 / W30 / W31 / GTO / LeMans / Skylark or GS this is a must for you. They must be welded to the floor. 110.99 1964-1972 Retractable 3 Point Seat Belt W/Chrome Latch (Black) GTDSB-R3LB 150.00 1964-1972 Retractable 3 Point Seat Belt W/Push Button GTDSB-R3PB 150.00 1964-1972 Round Seatback Bumpers (w/o insert) - PR For models with round seat back bumper GTFSSB61 8.99 1964-1972 Seat Belt W/Lift Latch (60" Belts) GTDSB-N2LB 44.00 Page 2/10
1964-1972 Seat Belt W/Lift Latch (74" Belts) - Black GTDSBL-BK74 44.00 1964-1972 Seat Belt W/Lift Latch (Retractable W/12 Sleeve & 7 Boot) GTDSB-R2LB 80.00 1964-1972 Seat Belt W/Push Button (60" Belts) GTDSB-N2PB 34.00 1964-1972 Seat Belt W/Push Button (Retractable W/12 Sleeve & 7 Boot) GTDSB-R2PB 80.00 1965-1966 Seat Belt Buckle Insert Stamped metal StageCoach insert for all GM standard seat belt GTPPBA6566A buckles 9.99 1965-1966 SEAT BELT RETRACTOR (DELUXE) This is an accessory seat belt retractor. It is used on lap belts that GTPPIN10681Z don't have the factory covered retractors. The roller is spring loaded and winds up the belt when you release the buckle. It is universal and fits a wide variety of belts no larger than 1 7/8" wide, 47.99 1965-1967 Seat Belt Anchor - Chrome New seat belt anchor chrome plated GTPPZSB100 25.99 1965-1967 Seat Belt Anchor - Stainless New stainless seat belt anchor with clear plastic - 2-1/4" long GTPPZSB102 23.99 1965-1970 Deluxe & Some Standard Seat Belt Retractor Fits most all GM cars with deluxe seat belts or metal buckle style GTPPZSRC6571A Cover RCF-300 belts. You can check your original, it will be marked with RCF300 All seat belt retractor covers are injection molded like factory original and come in black abs plastic with proper texture & codes 1965-1971 Seat Belt Tongue - Deluxe New seat belt tongue for deluxe seat belts with small hole GTPPZSB99 23.99 1965-1971 Seat Belt Tongue - Standard New seat belt tongue for standard seat belts with large hole GTPPZSB98 23.99 1966 Seat Track Chrome Adjustment Knob New 1966 GM seat track chrome adjustment knob. Chrome GTPPZ456 plated die cast with set screw just like factory fits all GM cars with bucket and bench seats. Page 3/10 25.99
1966-1967 Push Button with Stagecoach Emblem New push button with gold stagecoach emblem GTPPZSB103 1966-1967 Trunk Divider Board Machine-stamped laminated fiberboard die-cut like the originals. GTREMCVL-TKD-0 15 37.99 1966-1967 Trunk Divider Jute The jute backing is recommended because it provides insulation GTREMCVL-TDJ-0 from noise and moisture. 10 33.99 1966-1968 Deluxe Seat Belt Buckle Stainless Cover New stainless buckle cover 1966-1970 GM A-Body Bucket Seat Mounting Bracket Set Excellent quality reproduction manufactured to duplicate the GTAM407-3466-S original in both fit and appearance. 78.99 1966-1972 Bucket Seat Chrome Strip End Cap - Ea Stainless steel reproductions of the end caps used with our GTPGDK15500 seatback and base chrome strip kit 6.99 1966-1972 Bucket Seat Chrome Strip End Cap Kit - 12PC Stainless steel reproductions of the end caps used with our GTTWJ-3205 seatback and base chrome strip kit 28.99 1966-1972 Bucket Seat Extenders - Driver Side New bucket seat extenders. GM factory accessory puts the driver GTPPZBEL662 side seat back about 2 and gives you a little more leg room 125.99 1966-1972 Bucket Seat Headrest Guide Set These injection-molded plastic reproduction headrest guides GTD1402C install inside the seat to keep the headrest posts in line and allow smooth operation when raising or lowering your headrest. Sold as a complete set, the guides come with headrest lock covers and hardware for one bucket seat. 70.00 1966-1972 Bucket Seat Headrests Headrest Mounting Set Complete kit does 2 headrests 89.99 1966-1972 Bucket Seat Tracks Designed for bucket seats two per car. Authentically reproduced GTPGCH24738-LH with proper spring operated adjustments.includes black knob 173.99 1966-1972 Chrome Bucket Seat Trim - PR This precisely reproduced chrome piping set is more pliable GTTWJ-3202 (installation is a snap) and is priced dramatically lower than the 42.99 Page 4/10 GTPPZSB97 GTPGC210384
factory-molded version. This high-quality set has a factory original appearance once installed. Will do 2 seats 1966-1972 GM A Body Bucket Seat Adjuster & Pull Back New 1966-72 GM A body bucket seat adjuster and pull back GTPPZSAS6672 Springs springs. This set of springs is for one bucket seat only. 20.99 1966-1972 GM Bucket Seat Headrest Pebble Grain Inner This is the inner trim panel that mounts on the bottom of the GTPPZIN4321Z Trim Cover - Ea bucket seat headrest. They use two plastic clips to hold them on (not included). These are the correct pebble grain. Sold Individually.Fits: 1966-72 GM cars with two post style bucket seats 20.99 1966-1972 Seat Bottom Spring - EA Excellent quality reproduction manufactured to duplicate the GTD1402K original in both fit and appearance. Fits right or left side 117.00 1967-1968 Bucket Seat Release Button Reproduction of the original seat back lock buttons produced with GTTWJ-5214 the correct chrome finish 44.99 1967-1972 Hardtop Shoulder Harness Plastic Cover New 1967-72 GM cars shoulder harness plastic cover that GTPPZSHC6772 mounts at the end of the seat belt at the headliner, and covers the bolts at the headliner. This part is commonly dry rotted or missing. Comes black - paint to match and fits hardtop models only, left or right side. Fits 1967-69 Camaro and Firebird models, 1967-72 Chevelle, Cutlass / 442, Skylark/GS, GTO/Judge, Nova, Impala, Grand Prix, most full size and all other GM cars that had shoulder harness. 15.99 1967-1972 Plastic Standard Seat Belt Cover New factory replacement seat belt plastic cover. These fit all GM GTPPZSSC672BK cars with standard seat belts. Kit includes plastic cover and push button. Fits 1967-1972 Chevelle / Nova / Cutlass / 442 / W-30 / GTO / LeMans / Skylark / El Camino / Camaro / Monte Carlo / Firebird / Impala models. 20.99 1967-1972 Seat Adjuster Knob (Black) - Ea Seat adjuster knob, black. Sold each GTFSSAK687 13.99 1967-1972 Seat Adjuster Knob (Black) - PR Seat adjuster knob, black. Sold in pairs GTFSSAK687P 26.99 1967-1972 Seat Adjuster Knob (Chrome) - Ea Seat adjuster knob, chrome. Sold each GTFSSAK687C 13.99 Page 5/10
1967-1972 Seat Adjuster Knob (Chrome) - PR Seat adjuster knob, chrome. Sold in pairs 1967-1972 Seat Belt Anchor Bolts - Cad Plated 1 11/16"- EA The bolts are the factory-sized 13/16" and fit and function just like GTPGPP00229 the originals. 40.99 1967-1972 Seat Belt Bolt (Silver Cadmium Plated) - 1 1/4" New seat belt bolt coarse thread with 13/16Ó head. Used on all GTPPZ809 applications that use 1 1/4Ó long bolt - no shoulder. 6.99 1967-1972 Seat Belt Bolt - Cadmium Plated - 1 1/2" New seat belt bolt cadmium plated coarse thread with 13/16 GTPPZBB60 head - used on applications that use 1 ½ Long Bolts 6.99 1967-1972 Seat Belt Bolt - Cadmium Plated - 1 1/4" New seat belt bolt cadmium plated coarse thread with 13/16 GTPPZBB62 head - used on applications that use 1 ¼ Long Bolts 6.99 1967-1972 Seat Belt Bolt - Chrome Plated New seat belt bolt chrome plated coarse thread with 13/16 head GTPPZBB61 used on cars that use chrome plated headed bolts 9.99 1967-1972 Seat Hinge Arm Fastener Clip (Pair) Original special fastener clip for front seat hinge arm covers. Four GTHQW690A required per car. 6.99 1968-1969 Seat Belt Retractor Button Knob Seat belt retractor button finish knob comes in black GTPPZRB689B 15.99 1968-1971 Push Button with GM Emblem New push button with silver GM emblem GTPPZSB104 1968-1972 Bucket Seat Headrest Lock Assembly - Ea Includes escutcheon and lock. Mounts to the top of the seat to GTD1402J finish the edge where the headrest slides into the seat. - A complete set of four will do two bucket seats. 22.00 1968-1972 GM Cars GM Style Lap Seat Belt - Ea New GM style lap seat belt fits 1968-72 Chevrolet Impala, GTPPZ102LBLK Chevelle, El Camino; Monte Carlo, Buick Skylark, GS; Oldsmobile Cutlass, 442; and Pontiac GTO, LeMans. Sold as individually. 1968-1972 GM Front Seat Belt Set (w/retractors) - PR New GM style front seat belt set fits 1968-72 Chevrolet Impala, GTPPZ102FBLK Chevelle, El Camino; Monte Carlo, Buick Skylark, GS; 3 Page 6/10 GTFSSAK687CP 26.99
Oldsmobile Cutlass, 442; and Pontiac GTO, LeMans. Sold as Pair. 1968-1972 SEAT TRACK LH 2PC/SET 2 Piece seat track set GTD1561 132.00 1968-1972 SEAT TRACK RH 2PC/SET 2 Piece seat track set GTD1560 132.00 1968-1972 Standard Seat Belt Retractor Cover ROBBINS Fits most all GM cars with standard and plastic buckles. You can GTPPZSRC6872A 6715 Code check your original, it will be marked with ROBBINS 6715. All seat belt retractor covers are injection molded like factory original and come in black abs plastic with proper texture and codes 1968-1972 Trunk Divider Board & Jute (OE Style) This premium die-stamped fiberboard is guaranteed to fit and GTREMCVL-TKD-0 function exactly like the factory originals. The complete kit, with 40 jute divider backing, is recommended for a quality installation 1968-1972 Trunk Divider Board (Convertible) Machine-stamped laminated fiberboard die-cut like the originals. GTREMCVL-TKD-0 45 34.99 1968-1972 Trunk Divider Board (Coupe) Machine-stamped laminated fiberboard die-cut like the originals. GTREMCVL-TKD-0 35 36.99 1968-1972 Trunk Divider Jute (Convertible) The jute backing is recommended because it provides insulation GTREMCVL-TDJ-0 from noise and moisture. 20 28.99 1968-1972 Trunk Divider Jute (Coupe) The jute backing is recommended because it provides insulation GTREMCVL-TDJ-0 from noise and moisture. 15 29.99 1968-1974 Seat Belt Anchor - Stainless New stainless seat belt anchor with clear rubber - 2" long 23.99 GTPPZSB101 1969 Bucket Seat Headrest Escutcheons (Premium Quality) - Premium quality reproductions of the original headrest locks GTTWJ-5426 PR produced with the correct finish. One pair does one seat 53.99 1969 SEAT EMBLEM & REINFORCEMENT BRACKET - EA 39.99 the correct two piece chrome and brushed emblem with steel GTPPZSE69C reinforcement. The outer decorative emblem mounts on the seat Page 7/10
cover, and the reinforcement mounts on the inner cover. It has the tabs that go through the vinyl seat cover and bend onto the reinforcement. Made exactly like GM. You can now replace your old, dull pitted emblem with this new one. Sold each. 1969-1971 DELUXE SEAT BELT BUCKLE COVER - LARGE This is the deluxe interior large buckle cover. It is the correct GTPPZSB2571 brushed finish. Fits most all 69 70 and 71 deluxe interior seat belts. The size of this cover is 2 9/16" x 2 1/8". You can now replace your rusted or pitted cover with this new show quality cover. 1969-1971 New Front Deluxe Seat Belt Set In Black (Small New factory deluxe front seat belt set with GM small buckle. This GTPPZDLXR69BLK 519.99 Buckle W/Retractor) - PR is an OEM replacement set that is used with bucket or bench seats. Other colors available. Fits 1969-71 Chevelle, 1970-71 Monte Carlo, 1969-71 GTO/LeMans, 1969-71 Skylark/GS, 1969-71 El Camino, 1969-71 Cutlass/442, 1969-71 Impala, LeSabre, Delta 88, 98 and 1969-71 Grand Prix. This sale is for black only and is sold as a pair only. 1969-1972 Bucket Seat Release Button Reproduction of the original seat back lock buttons produced with GTTWJ-5212 the correct chrome finish 36.99 1969-1972 DELUXE SEAT BELT BUCKLE COVER - SMALL This is the deluxe interior small buckle cover. It is the correct GTPPZSB2572 brushed finish. Fits most all 69 70 71 72 and 73 deluxe interior seat belts. The size of this cover is 1 3/4" x 1 1/2". You can now replace your rusted or pitted cover with this new show quality cover. 1969-1972 Deluxe Seat Belt Retractor Covers RCF-400 Code Fits most GM cars with Deluxe seat belts. All seat belt retractor GTPPZSRC6972A covers are injection molded like factory original and come in black abs plastic with proper texture and codes 1969-1972 Seat Back Lock Assembly This seatback lock assembly is complete and ready to bolt into GTD1402B your original or reproduction seat frame. The assembly features the full lock mechanism, which includes the protective cover and the original style release button. The assembly will work on either left or right side seatsñrequires one per seat. 172.00 1969-1972 SEATFRAME ASSEMBLY (W/SPRING) - RH/LH Excellent quality reproduction manufactured to duplicate the GTD1402A original in both fit and appearance. 682.00 1970-1972 Bucket Seat Headrest Escutcheons (Premium Premium quality reproductions of the original headrest locks GTTWJ-5428 Quality) - PR produced with the correct finish. One pair does one seat 45.99 1971-1972 Seat Belt Retractor Covers w/access Doors New seat belt retractor covers with access doors for Robbins GTPPZIN3200Z (Robbins 3200) - PR 3200. You can check your original by extending out the seat belt and looking at the tag. These covers are sold in pairs.fits: Most Page 8/10
1971-74 GM Cars Page 9/10
Early Birds specializes in hard-to-find GTO parts and has been serving you for over 25 years. Call us at 1 800 463 0546 Mon - Fri 9:00 AM - 4:00 PM (EST) - we know our cars! Fax your order: (416) 630 8794 Our Mailing Address: Early Birds 25 Saunders Road, Unit 9 Barrie, Ontario L4N 9A7 Canada Page 10/10