Port Air Operated Valve Series SYA000/000/7000 How to Order A, B port size Thread type Thread piping (Inch size) - Rc Symbol Port size Applicable series Symbol Port size Applicable series F G SYA000 N for ø 2 " N NPT SYA000 01 1 8 SYA000 N7 for ø1 4 " T NPTF 02 1 4 SYA7000 N for ø 2 " Except for (Metric size) N7 for ø1 4 " SYA000 Symbol Port size Applicable series N9 for ø 16 " C4 for ø4 N7 for ø1 4 " SYA000 SYA7000 C6 for ø6 N9 for ø 16 " C4 for ø4 C6 for ø6 SYA000 Series C8 for ø8 SYA000 C8 for ø8 SYA000 SYA7000 C10 for ø10 7 SYA7000 Body ported Base mounted Base mounted SYA 1 20 C6 SYA 1 Series SYA000 SYA000 SYA 7 1 Type of actuation 2 single 1 2 4 2 double closed center exhaust center 40 40 Symbol - 00 02 0 - F N T Port size P, R port thread type Rc G NPT NPTF Port size Without sub-plate Without sub-plate (Pilot port: expect for RC) 1 4 With sub-plate 8 With sub-plate Bracket - Without bracket With foot bracket F1 (2 single only) F2 With side bracket P, R port thread type - F N T Port size Rc G NPT NPTF Symbol Port size Applicable series - Without sub-plate 01 1 8 With sub-plate SYA000 02 1 4 With sub-plate SYA000 pressure center 18
SYA000/000/7000 Specifications Fluid Operating pressure range MPa 2 single 2 double 2 single 2 double Pilot pressure range Note 1) MPa Ambient and fluid temperature ( C) (Manual operation) Lubrication Mounting orientation Impact/Vibration resistance (m/s 2 ) Note 2) Air 0.1 to 0.7 0.1 to 0.7 0.2 to 0.7 (0.7 x P + 0.1) to 0.7P: Operating pressure range 0.1 to 0.7 0.2 to 0.7 Max. 60 Non-locking push type Not required Unrestricted 10/0 Note 1) In case of single type, be certain that pressure within operating pressure range be supplied to supply port, because return pressure is introduced from supply port {1(P)} for activation. Note 2) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve and armature, when pilot signal is ON and OFF. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between 8. and 2000 Hz. Test was performed to axis and right angle directions of the main valve and armature when pilot signal is ON and OFF. (Value in the initial state) Caution For Safety Instructions and Common Precautions, refer to back page 1 through to 1. How to Order Manifold Base Same manifolds as series SY (Non plug-in style) are prepared. (For 20, 41, 42 and 4 Types) Pilot Pressure Range (Single pilot) SSYA Fill the same as SSY. 7 Specify the part numbers for valves and options together beneath the manifold base part number. <Example> SSYA-42-0-02 1 set (Type 42, station manifold base part no.) SYA140 1 set (Single air operated valve part no.) SYA240 1 set (Double air operated valve part no.) SY000-26-20A-Q 1 set (Blanking plate assembly part no.) The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc. Note) When single body ported air operated valves are ordered, manifold mounting bolts and gaskets are not included. Order them separately if necessary. (For details, refer to page 6.) 7 Pilot pressure MPa Pilot pressure range Operating pressure MPa 184
SYA000/000/7000 Flow Characteristics/Weight Model/Series SYA 20 (Body ported) Valve model Type of actuation 2 Single Double SYA 20- Exhaust center Pressure center 2 Single Double SYA 20-C4 Exhaust center Pressure center 2 Single Double SYA 20-C6 Exhaust center Pressure center Pilot Port size port size (Nominal size) P, EA, EB A, B Note) ( ): denotes normal. * These values have been calculated according to ISO68 and represent the flow rate measured in standard conditions at an upstream pressure of 0.6 MPa (relative pressure) and a differential pressure of 0.1MPa. C4 One-touch fitting for ø4 C6 One-touch fitting for ø6 Flow characteristics 1 4/2 (P A/B) 4/2 / (A/B EA/EB) C (dm /(s bar)) b Cv Q[l/min(ANR)]* C (dm /(s bar)) b Cv Q[l/min(ANR)]* 0.61 0.48 0.47 0.72 0.9 0.6 0.76 0.76 0.6 0.44 0.46 0.42 0.16 0.1 0.1 0.0 (0.41) 0.48 (0.) 0.1 (0.11) 0.29 0.28 0. 0.18 0.1 0.16 0.76 (0.46) 0.42 (0.4) 0.21 (0.12) 0.0 0. 0.2 0.19 0.24 0.16 0.77 (0.49) 0.4 (0.4) 0.21 (0.1) 171 17 10 14 (108) 182 148 166 210 (120) 19 2 167 201 (16) 0.64 0.47 0.4 0.4 0.4 0.4 0.0 0.29 0.9 0. 0.18 0.1 0.47 (0.44) 0.41 (0.7) 0.1 (0.12) 0.47 0.64 0.9 0.1 0.17 0.1 0.42 (0.41) 0.4 (0.7) 0.11 (0.11) 0.9 0.6 0.60 0.64(0.42) 0.61 0.1 0.17 0.16 0.1 (0.6) 0.17 (0.11) 0.4 0.16 181 11 129 (117) 11 167 10 110 (109) 149 176 16 164 (111) 19 Weight (g) 7 9 44 46 48 40 42 44 Model/Series SYA 40 (Base mounted) Valve model Type of actuation Pilot port size (Nominal size) Port size 2 Single Double SYA 40-01 Exhaust 1 8 center Pressure center Note 1) ( ): denotes normal. Note 2) [ ]: Without sub-plate. 1 4/2 (P A/B) 4/2 / (A/B EA/EB) C (dm / (s bar) ) b Cv Q[l/min(ANR)]* C (dm /(s bar) ) b Cv Q[l/min(ANR)]* Weight (g) Flow characteristics Note 1) 1.0 0.0 0.24 24 1.1 0.0 0.26 280 69 (4) 71 (6) 0.77 0.28 0.18 19 0.8 0.0 0.19 216 0.7 1.2 (0.1) 0.1 0.18 0.24 (0.4) 0.29 (0.14) * These values have been calculated according to ISO68 and represent the flow rate measured in standard conditions at an upstream pressure of 0.6 MPa (relative pressure) and a differential pressure of 0.1MPa. 187 294 (144) 1.1 (0.) 0.89 0.26 (0.2) 0.24 (0.16) 0.47 0.24 27 (164) 2 7 (8) Note 2) 18
SYA000/000/7000 Flow Characteristics/Weight Model/Series SYA 40 (Body ported) Valve model SYA 20-01 SYA 20-C4 SYA 20-C6 SYA 20-C8 Type of actuation 2 2 2 2 Single Double Single Double Single Double Single Double Note) [ ]: denotes normal. Pilot Port size port size (Nominal size) P, EA, EB A, B x 0.8 Model/Series SYA 40 (Base mounted) Model/Series SYA7 20 (Body ported) Model/Series SYA7 40 (Base mounted) 1 8 Rc 1 8 C4 One-touch fitting for ø4 C6 One-touch fitting for ø6 C8 One-touch fitting for ø8 Pilot Valve model Type of actuation port size (Nominal size) Port size 2 Single Double SYA 40-02 x 0.8 1 4 Note 1) [ ]: denotes the normal. Note 2) ( ): denotes without sub-plate. Valve model SYA7 20-02 SYA7 20-C8 SYA7 20-C10 Pilot Port size Type of actuationport size (Nominal size) P, EA, EB A, B 2 Single Double 1 4 2 2 Single Double Single Double Note) [ ]: denotes normal. 1 8 P port: 1 4 EA, EB port : 1 8 C8 One-touch fitting for ø8 C10 One-touch fitting for ø10 Pilot Valve model Type of actuation port size (Nominal size) Port size 2 Single Double SYA7 40-02 1 8 1 4 SYA7 40-0 2 Single Double 1 8 Note 1) [ ]: denotes the normal. Note 2) ( ): denotes without sub-plate. 8 ( ) ( ) ( ) ( ) ( ) Flow characteristics Note) 1 4/2 (P A/B) 4/2 / (A/B EA/EB) C [dm /(s bar)] b Cv Q[l/min(ANR)]* C [dm /(s bar)] b Cv Q[l/min(ANR)]* 1.9 0. 0.49 499 2.4 0.9 0.61 648 1.7 1. 2.2 [0.91] 0.7 0.74 0.7 0.78 [0.71] 1. 1. 1. 1.7 [0.80] 1.9 1.6 1.4 2.2 [1.6] C [dm /(s bar)] 2.4 1.8 1.4. [0.84] 0.4 0.44 0.46 [0.8] 0.4 0.40 0.6 0.44 [0.7] 0. 0.1 0. 0.1 [0.47] 0.21 0.29 0.8 0.2 [0.44] 0.4 0.41 0.61 [0.28] 0.20 0.19 0.19 0.21 [0.18] 0. 0. 0. 0.42 [0.2] 0.4 0.9 0.9 0.6 [0.44] 1.8 2. [1.] 1.8 0.8 0.84 0.84 [0.84] 0.84 2.0 1.6 1.8 [1.4] 1.7 2. 1.7 2.0 [1.] 1.8 0. 0.2 [0.4] 0.8 0.64 0.7 0.64 [0.] 0.7 0.7 0.2 0. [0.7] 0. 0.29 0.8 0.7 [0.40] 0.41 0.46 0.9 [0.40] 0.46 0.0 0.28 0.0 [0.27] 0.27 0.2 0.9 0.44 [0.] 0.44 0.7 0.46 0.2 [0.4] 0.0 Note 1) Flow characteristics 1 4/2 (P A/B) 4/2 / (A/B EA/EB) b Cv Q[l/min(ANR)]* C [dm /(s bar)] b Cv Q[l/min(ANR)]* 0.41 0.64 68 2.8 0.29 0.66 707 0.47 0.0 0. 0.44 0.6 [0.60] 0.8 [0.28] 1.8.0 [1.2] 1.8 0.40 0. [0.48] 0.40 0.47 0.72 [0.7] 0.48 Flow characteristics 1 4/2 (P A/B) 4/2 / (A/B EA/EB) C [dm /(s bar) ] b Cv Q[l/min(ANR)]* C [dm /(s bar) ] b Cv Q[l/min(ANR)]* 4.1 0.2 0.9 999. 0. 0.81 8 2.9 2. 4. [2.4].2 2.6 2.4. [2.4].8 2.8 2..8 [2.4] C [dm /(s bar)] 4.1.0 2.6. [2.] 4.9.0 2.6. [2.] 0.1 0.70 0.9 0.6 0.2 [0.2] 0.97 [0.61] 0.26 0.77 0.24 0.6 0.2 0.7 0.28 [0.22] 0.78 [0.7] 0.26 0.86 0.27 0.67 0.2 0.9 0.2 [0.1] 0.89 [0.61] 2.4.4 [2.1] 2.2.2 2.4 2.6 [1.9] 2.2.2 2.4 2.7 [2.0] 2. 0.8 0. [0.8] 0.9 0.7 0.1 0.42 [0.46] 0.4 0.4 0.21 0.8 [0.8] 0.8 0.6 0.82 [0.4] 0.8 0.82 0.62 0.70 [0.6] 0.60 0.82 0.9 0.70 [0.6] 0.61 Note 1) Flow characteristics 1 4/2 (P A/B) 4/2 / (A/B EA/EB) b Cv Q[l/min(ANR)]* C [dm /(s bar)] b Cv Q[l/min(ANR)]* 0.41 1.1 112 4.1 0.29 1.0 106 0.4 0.80 0.42 0.71 0.9 [0.49] 1. [0.6] 0.29 1.2 0.40 0.80 0.42 0.71 0.1 [0.1] 1. [0.64] 47 420 626 [287] 209 201 198 219 [189] 89 7 4 [229] 48 404 7 67 [448] 2.6 4.7 [1.7] 2.2 4. 2.6 4.8 [1.7] 2. 0.41 0. [0.48] 0.49 0.27 0.4 0. [0.48] 0.4 0.72 1.1 [0.49] 0.6 1.1 0.7 1.1 [0.49] 0.66 47 644 [417] 48 28 26 281 [2] 26 412 47 [7] 441 81 46 [411] 49 Weight (g) * These values have been calculated according to ISO68 and represent the flow rate measured in standard conditions at an upstream pressure of 0.6 MPa (relative pressure) and a differential pressure of 0.1MPa. 16 40 87 [270] 490 778 [47] 490 8 64 69 82 87 9 76 82 87 68 74 79 Weight Note 2) (g) 10 (42) 110 (47) 11 (2) * These values have been calculated according to ISO68 and represent the flow rate measured in standard conditions at an upstream pressure of 0.6 MPa (relative pressure) and a differential pressure of 0.1MPa. 742 67 1048 [618] 794 67 92 829 [81] 94 699 616 97 [614] 644 89 [6] 94 82 614 718 [41] 74 8 78 724 [6] 617 Weight (g) 12 177 186 18 18 192 1 180 * These values have been calculated according to ISO68 and represent the flow rate measured in standard conditions at an upstream pressure of 0.6 MPa (relative pressure) and a differential pressure of 0.1MPa. 84 718 141 [670] 128 816 718 16 [682] 712 12 [492] 641 112 74 1261 [492] 649 189 Weight Note 2) (g) 240 (111) 286 (17) 294 (16) 240 (111) 286 (17) 294 (16) * These values have been calculated according to ISO68 and represent the flow rate measured in standard conditions at an upstream pressure of 0.6 MPa (relative pressure) and a differential pressure of 0.1MPa. 186
SYA000/000/7000 Series SYA000: Body Ported 2 single SYA120- C4, N (-F2) C6, N7 Foot bracket C4, N SYA120- -F1 C6, N7 ø1. () (2 ø.2 for mounting) (P, EA, EB port) 2 ø1. die-cast hole (For manifold gasket ing) Applicable tubing O.D.: ø4, ø" ø6, ø/2" 2 ø.2 2 ø2.2 SYA120-187
SYA000/000/7000 Series SYA000: Body Ported 2 double C4, N SYA220- (-F2) C6, N7 ø1. () 2 ø1. die-cast hole (For manifold gasket ing) (P, EA, EB port) SYA220- Applicable tubing O.D.: ø4, ø" ø6, ø/2" 2 ø2.2 closed center / exhaust center / pressure center SYA 4 20- C4, N (-F2) C6, N7 ø1. () 2 ø1. die-cast hole (For manifold gasket ing) (P, EA, EB port) SYA 4 20- Applicable tubing O.D.: ø4, ø" ø6, ø/2" 2 ø2.2 188
SYA000/000/7000 Series SYA000: Base Mounted 2 single SYA140-01 2 ø.2 2 double SYA240-01 2 ø.2 189
SYA000/000/7000 Series SYA000: Base Mounted closed center / exhaust center / pressure center SYA 440-01 2 ø.2 x 0.8 190
SYA000/000/7000 Series SYA000: Body Ported 2 single SYA120- ø1.8 () C4, N C6, N7 C8, N9 (-F2) Foot bracket SYA120- C4, N C6, N7 C8, N9 -F1 2 ø1. die-cast hole (For manifold gasket ing) (P, EA, EB port) 2 ø.2 Normal override 2 ø.2 Applicable tubing O.D.: ø4, ø/2" ø6, ø/16" ø8, ø" 2 ø.2 SYA120-01 191
SYA000/000/7000 Series SYA000: Body Ported 2 double C4, N SYA220- C6, N7 (-F2) C8, N9 ø1.8 () (P, EA, EB port) SYA220-01 2 ø2.2 die-cast hole (For manifold gasket ing) 2 ø.2 Applicable tubing O.D.: ø4, ø/2" ø6, ø" ø8, ø/16" closed center / exhaust center / pressure center C4, N SYA 4 20- C6, N7 (-F2) C8, N9 ø1.8 () SYA 4 20-01 2 ø2.2 die-cast hole (For manifold gasket ing) (P, EA, EB port) 2 ø.2 2- Applicable tubing O.D.: ø4, ø/2" ø6, ø" ø8, ø/16" 2 ø.2 192
SYA000/000/7000 Series SYA000: Base Mounted 2 single SYA140-02 2 ø4. 2 double SYA240-02 2 ø4. x 0. 19
SYA000/000/7000 Series SYA000: Base Mounted closed center / exhaust center / pressure center SYA 4 40-02 2 ø4. 194
SYA000/000/7000 Series SYA7000: Body Ported 2 single SYA7120- C8, N9 (-F2) ø1.8 () C10, N11 (P port) Foot bracket SYA7120- C8, N9 C10, N11 -F1 2 ø2.2 die-cast hole (For manifold gasket ing) (EA, EB port) 2 ø4.2 Applicable tubing O.D.: ø8, ø/16" ø10, ø/8" 2 ø4.2 SYA7120-02 19
SYA000/000/7000 Series SYA7000: Body Ported 2 double C8, N9 SYA7220- ø1.8 () C10, N11 (P port) 2 ø2.2 die-cast hole (For manifold gasket ing) (EA, EB port) SYA7220-02 Applicable tubing O.D.: ø8, ø/16" ø10, ø/8" 2 ø4.2 closed center / exhaust center / pressure center C8, N9 SYA7 20- ø1.8 () 4 C10, N11 (P port) 2 ø2.2 die-cast hole (For manifold gasket ing) (EA, EB port) SYA7 4 20-02 Applicable tubing O.D.:ø8, ø/16" ø10, ø/8" 2 ø4.2 196
SYA000/000/7000 Series SYA7000: Base Mounted 2 single 02 SYA7140-0 /8, 2 ø4. 2 double 02 SYA7240-0 /8, 2 ø4. 197
SYA000/000/7000 Series SYA7000: Base Mounted closed center / exhaust center / pressure center SYA7 4 40-02 0 /8, 2 ø4. 198