WG 09 TUING 090-0-000 (00 mm) TUING 090-0-000 (00 mm) 000G-0-U() MNIFOL & ELOW (HSSIS SUPPLIE) HORN-IR,LK,TWIN,SHORT 09-0-000 ONNETOR-MLE 0-0-000 VLVE-IR 0-0-000 IRSYS-MNIFOL & ELOW (OTH SUPPLIE WITH HSSIS) OLT 000-0-() WSHER 000E--00() RKET SM-IR HORN (MOUNTE ON K OF OMPRTMENT) OUPLER-QUIK,IR 9-0-000 VLVE-LL, IR 9-0-000 ONNETOR-MLE -0-000 P-SERIES SOLEI-VLVE 09--000 OLT 000-0-U() WSHER 000E--00U() 0009-0-00U() ESSORY IR LINE FROM HSSIS RESERVOIR PRESSURE PROTETION VLVE FIRST USE 0 M-SERIES O T SLE RWING SUPPLY INSTL PRT 09 /9/00
WG 0 WNING RIL 90 G9-0-0T () RIL-WNING -0-HT RIVET -0-HT () RIVET -0-HT () OLT-LG --HT () SETION - SETION - SETION - 000d0,sht FIRST USE 09 P-SERIES O T SLE RWING WNING INSTL P-SERIES PRT 0
WG 0 0'-0" TRTIONER --HT WNING-ELIPSE HRWRE -0-HT WNING-ELIPSE -0-HT N SHT SHT OOR-WNING -0-HT G9-0-0T () N SHT P0L REFREE ELIPSE TUM 000d0,sheet FIRST USE 0 P0L O T SLE RWING WNING INSTL P-SERIES PRT 0
WG RELESE TE WG 0 0-0 WIN ZONE ISION REOR TE FTR-ORIG 0-0 IT FLOOR SM SIEWLL SM SEL 090-0-00 RIL-WNING 0-0-HT (0) TRIM-OVER SIEWLL SM 000G-0-09 (0) RIL-WNING 0-0-HT (9) 0-0-HT () RKET-NHOR -0-HT (/R) 000G-0-09 () RKET-NHOR -0-HT (/R) 000G-0-09 () FOM-PLUG 9-0-000 () HNGER-VLNE SETION - ROOF SM 000G9-0-9 (0) SEL-UL 099-0-000 (REF) SETION - SETION - RKET -0-HT () 000G9-0- RKET 090-0-HT 090-0-HT 000G9-0- RKET -0-HT -0-HT 000G9-0- ROOF SM TPE-SELING -0-HT (000) NGLE-W/HOLES 0--HT () 000G-0-0 () KWLL SM 0 PLTE-W/HOLES --HT () () () 9 () 9 REF 000G9-0- () SETION F-F KWLL SM 9. VIEW TYPIL TO LL OVERLPPING SIE HINGE OORS.. LIGN OLT-STRIKER WITH LTH ON OOR. SETION - FLOOR SM FOM-SEL 09-0-000 () IT ITS ONLY RER P WIN WINNEGO ONLY. LOTE TO IMENSION THT LLOWS OOR TO OPEN PPROXIMTELY. SIEWLL SM. VIEW TYPIL TO LL SIE HINGE OORS EXEPT OVERLPPING SIE HINGE OORS. SETION E-E OPYRIGHT 009 WINNEGO R INUSTRIES, IN.. THIS IS MINL IMENSION JUST THE GS SPRING SUH THT OORS LINE UP IN OPEN POSITION. SEL TPE 9-0-HT (000) FTR HKR ORIG. TE LL IMENSIONS RE. MUST E LOTE WITHIN 0MM OF RIL-WNING SPLIE. RILL ITIONL HOLES N S S REQUIRE. P.E. M.E. SNR IN MILLIMETERS FIRST USE 0 P0L. USE HESIVE PROMOTER -0-000 TO PREP SURFE FOR THE TPE. KWLL SM UNSPEIFIE TOLERNES RE: WHOLE IM (X) MTERIL: ONE-PLE (X.X) TWO-PLE (X.XX). IMENSIONS RE FROM EGE OF OOR UTOUT N TOP OF FETURE STRIP TO UPPER HOLE OF THE LOWER SET OF HOLES, LOSEST TO THE OOR NGLE THIR NGLE PROJETION. RILL.-.9 I. HOLE USING THE HOLES LOTE EITHER SIE OF THE TOOLING HOLES S TEMPLTE. INSTLL RIVET 90-0-HT (/R) SETION G-G O T SLE RWING OY INSTL-SETIONS TES: OF PRT 0 REF:
WG 0 SIEWLL SM FLOOR SM-UPPER 000G9-0- SETION H-H -PILLR SEL PLNE 0 (WITH 0 N GS SPRING) 0 (WITH GS SPRING) HNLE-SSIST 09-0-HT 09-0-HT 0G00--90 () WIN IT GS SPRING MOLING-OY 09-0-HT (9mm) LIP-X MS 09-0-000 99 SETION - RKET,GS-SPRING VIEW J RER P P-ROOF 0 RIL-WNING IT WIN ITS ONLY WINNEGO ONLY 0 90 TO OF RIL-WNING FIRST USE 0 P0L WNING RIN HOLE VEIW K O T SLE RWING OY INSTL-SETIONS PRT 0
WG 0 NGLE-MOUNT,UMPER 0--HT 000G9-0-T () 0 NGLE-MOUNT,UMPER SETION - TPE 0-0-000 (90) 9 SUPPORT-OOR,ENT VIEW - PNEL SM-VLNE RKET-GS SPRING -0-HT 000G9-0-0U () SEL PLNE REF SETION F-F 0 RKET-GS SPRING F 0-0 G SETION - (ROTTE 0 ) G FIRST USE F GS SPRING 9-0-000 VIEW E-E SUPPORT-VLNE 9-0-HT 000G9-0-9 () 0 P0L O T SLE RWING OY INSTL-SETIONS PRT 0
WG 0 0 REF K MOUNT-STRIKER OLT 9-0-HT OLT 000G-0-U () VLNE PNEL SETION G-G PNEL SM-VLENE OLT-STRIKER 9-0-HT K PLTE SM-STIKER OLT 9-0-HT ETIL J P FLOOR FRME TUE SEL PLNE STL-TUE OLT-HOO JUSTING 0-0-000 () 0009-0-00U () RIV 09-0-000 () RKET-GS SPRING -0-HT 000G9-0-0U () SEL PLNE SUPPORT SM-LTH 9-0-HT OLT 000-0-0U() 0009-0-00U() PNEL SM-VLNE SETION N-N 9 PLTE-MOUNT,PIN 00-0-HT OLT 000-0-0U() 0009-0-00U() OLT-HOO JUSTING 0-0-000 () 0009-0-00U () SETION K-K SPRING-GS 9-0-000 N PNEL SM-VLNE RH SIE 0 LH SIE PNEL SM-VLNE OLT-HOO JUSTING 0-0-000 () 0009-0-00U () OLT-STRIKER -0-HT 000-0-00U () N P SETION M-M PLUNGER SM-OLT N MOUNT-STRIKER OLT 9-0-HT 000G9-0-0T () SUPPORT-VLNE OOR -0-HT 000G-0-9 () N SPRING-GS 9-0-000 VIEW L-L 9 OLT 000G-0-U () OLT 000G-0-U () 000G9-0-0T () SEL PNEL FIRST USE 0 P0L VLNE PNEL O T SLE RWING SETION H-H ETIL J OY INSTL-SETIONS PRT 0
WG 0 P FLOOR FRME TUE TUE OLT 000-0-0U () 0009-0-00U () SUPPORT SM 9-0-HT -PN,HE 000G9-0-0U() SUPPORT SM-LTH OLT-HOO JUST 0-0-000 () 0009-0-00U () PNEL SM-VLNE TH-LTH,OOR 00-0-HT SHIM 09-0-HT /R PLUNGER SM-OLT PLUNGER SM PLTE-MOUNT,PIN 00-0-HT OLT 000-0-0U () 0009-0-00U () P OLT-STRIKER -0-HT 000-0-00U () SETION S-S (ROTTE) SETION P-P TUE V -PN,HE 000G9-0-0U() OLT 000-0-0U () 0009-0-00U () SUPPORT SM 9-0-HT PNEL SM-VLNE PLTE-MOUNT,PIN 00-0-HT OLT 000-0-0U () 0009-0-00U () OLT-HOO JUST 0-0-000 () 0009-0-00U () V TH-LTH,OOR 00-0-HT SHIM 09-0-HT /R OLT-STRIKER -0-HT 000-0-00U () SETION V-V FIRST USE 0 P0L O T SLE RWING SETION U-U OY INSTL-SETIONS PRT 0
WG 0 X W W.0 () (STEEL TRIM). () (FIERGLSS TRIM) X EXHUST IFFUSER FOLLOWS EPRTURE NGLE SETION W-W PNEL-TRIM,IFFUSER 9-0-HT RETINER- 9-0-HT () P-,RETINER 9-0-HT () ETIL T 00 9 SETION X-X SETION - FIRST USE 0 P0L VIEW O T SLE RWING OY INSTL-SETIONS PRT 0
WG 0 STRP-TTHMENT,FRONT EN 9-0-0 RIVET 000H-0-0R () 000G-0-() NGLE-MOUNT,FRONT EN 9-0-0 000G9-0-0U () NGLE-SUPPORT,MIRROR 9-0-0() OLT 000-0-0() SETION F-F SETION E-E OLT 000-0- () 0009-0-00 () WSHER 000E--00 () -OLT RETINER 9-0-0 () RKET SM-UMPER -0-0 OLT 000-0- WSHER 000E--00() 0009-0-00 RKET SM-UMPER -0-0 OLT 000-0- WSHER 000E--00() 0009-0-00 SPER-UMPER -0-0 () TRIM-PNEL,FIERGLSS 0-0-0 -PNHE 000G0-0-E () HOO OMPT-FRONT 0-0-Y USE WITH PY & P9N USE WITH P0L & P0T KEY 0-0-000 TO E INSTLLE ON KEY RING IN MOTORHOME PLNT. PNEL SM-FRONT,LOWER 0-0-YS RKET SM-UMPER -0-0 OLT 000-0- WSHER 000E--00() 0009-0-00 RKET SM-UMPER -0-0 OLT 000-0- WSHER 000E--00() 0009-0-00 FIRST USE 09 M9 N O T SLE RWING OY PNEL INSTL-FRONT PRT 0 //00
WG 0 TRIM-PNEL,FIERGLSS 0-0-0 -PNHE 000G0-0-E () ETIL H L G E E SETION G-G TRIM-PNEL,FIERGLSS 0--0 -PNHE 000G0-0-E () F F MER TRIM-PNEL,FIERGLSS G 9 ETIL H L 0--0 0--0 -PNHE 000G0-0-E () OF VEHILE RKET-FRONT EN LOWER -PILLER NGLE-MOUNT,UMPER 0--0() -PN,HE 000G9-0-0() -PN,HE 000G9-0-() (THRU STEEL RKET INTO UPPER WIPER SUPPORT TUE) GS SPRING 9-0-000 LL STU 00-0-000 0009-0-00 RKET-FRONT EN NGLE-MOUNT SELPLNE SETION - L VIEO MER SYS W/OLOR MON VIEO MER SYSTEM FIRST USE 09 M9 N NGLE-MOUNT O T SLE RWING 0 SETION - SETION - (PLS) SETION - OY PNEL INSTL-FRONT PRT 0 //00
WG 0 OLT-HOO JUSTING 0-0-000() 0009-0-00U () PNEL-FRONT,LOWER 0-0-0 SUPPORT SM-WIPER 0-0-Y LTH-HOO,FRONT EN 0-0-0() RKET-UMPER,HOO 00-0-0() G 9 TO TOP OF TOP TUE F PLTE SM-SUPPORT,MIRROR 999-0-0 RKETHELMP,JUSTER,LH 99-0-0 0 RKETHELMP,JUSTER,RH 99-0-0 RKET SM-MTG,HLP,UPR,LH -0-0 RKET SM-MTG,HLP,UPR,RH -0-0 () 0 () 9 () 0 () RKET SM-MTG,HLP,LWR,RH -0-0 G SUPPORT SM-FRONT 00-0-0 F RKET SM-FOGLMP,RH 00-0-0 RKET SM-FOGLMP,LH 00-0-0 RKET SM-MTG,HLP,LWR,LH -0-0 FIRST USE 09 M9 N 0 () O T SLE RWING PNEL-FRONT,LOWER PRT 0 //009
WG 0 PLTE-FRONT EN,TTHMENT -0-0() PLTE-FRONT EN,TTHMENT -0-0 RKET-MOUNT,FRONT EN 0-0-0 NGLE-SUPPORT 9-0-0 9 SETION G-G SETION F-F FIRST USE 09 M9N O T SLE RWING PNEL-FRONT,LOWER PRT 0 //009
TE WG ZONE ISION REOR TE FTR-ORIG PULL-LOK -0-0 () LTH 00-0-000 () RKET-LINKGE 0-0-0 0-0-0(SERIL #0L00 ONLY) PNEL-HOO,OUTER 99-0-Y(UP TO 09-0-09) 99-0-0(FTER 09-0-09) RETINER-LTH,HOO -0-0 () SPER-LTH,HOO -0-0 () E E.0 () RKET-LINKGE 0-0-0 WSHER. MOUNT-HOO () 0-0-0 0-0-0(SERIL #0L00 ONLY) 000G9-0-U () MOUNT-HOO 0-0-0 000G9-0-U () FTR HKR P.E. M.E. SNR R ORIG. TE OPYRIGHT 00 WINNEGO INUSTRIES, IN. LL IMENSIONS RE IN MILLIMETERS FIRST USE 09 M-SERIES UNSPEIFIE TOLERNES RE: WHOLE IM (X) MTERIL: ONE-PLE (X.X) TWO-PLE (X.XX) NGLE. 0.0. USE HESIVE RESI -0-000 & HESIVE URTIVE -0-000 FOR ONING PRTS SETION E-E THIR NGLE PROJETION WEIGHT:.0 LS O T SLE RWING. ENTER ON HOLE IN PRT HOO OMPL-FRONT OF PRT 0 REF: //00
WG 0 WSHER 000E-0-00U WSHER 000E-0-00U OLT-SHOULER,HEX 00-0-0 0009-0-00U ERING-LIP 0-0-0. ERING-LIP 0-0-0.9 SETION - ( PLS) RKET-GS SPRING -0-0() -PN,HE 000G9-0-U () ERING-LIP 0-0-0 TUE-LINKGE 0-0-0() OLT-SHOULER,HEX SOKET 00-0-0 WSHER 000E-0-00U SETION - ( SIES) 0009-0-00U SETION - ( PLS) WSHER 000E-0-00U FIRST USE 09 M-SERIES O T SLE RWING HOO OMPL-FRONT PRT 0 //00
R WG UNIT TE RELESE 0--0--0 000-0 P0L 0 0 0 000-0 --- --- --- --- --- WG 000 000-0 P0T.... 000-0 --- --- --- --- --- 000-0 PY.... 000-0 P9N.... EL-LOGO MERIIN LG 9-0-0 () PLTE-FREIGHTLINER SML (HSSIS SUPPLIE) EL-LOGO MXIUM HSSIS 9-0-0 EL-LOGO OME -0-0 () (PSSENGER SIE) (RIVER SIE) 0 () 0 (PSSENGER SIE) 00 (RIVER SIE) EL-LOGO,V LSS 9-0-0 () 9-0-0 () TES: REQUIRE FOR P0L N P0T ONLY. SMLL V LSS LOGO ON FRONT EN N LRGE V LSS LOGO ON SIEWLLS N KWLL. 0 ENTER ON UNIT.. (LRGE) 9 (SMLL) (PSSENGER SIE) (RIVER SIE) EL-LOGO MERIIN SML 9-0-0 0 9. IE UT RYLI FILM TO PROTET UNIT (KIT-PINT PROTETION -0-000). PSSENGER SIE OF UNIT SHOWN, RIVER S SIE OPPOSITE.. EN PNELS OF SLIEOUT ROOMS WILL E PINTE WITH SEOT N LER OT ONLY. THERE WILL E OLORE ESIGN GRPHI ELEMENTS PINTE ON THE EN PNELS.. PPLY SELER OY SEM LER 90-0-000 TO HELP SEURE EGES.. USE -0-000 (00 FT) TO OVER UNSELE ROOF SEMS.. LER OT TO E PPLIE ON ENTIRE UNIT TO PROTET PINT.. TOLERNE FOR IMENSIONS IS +/-0mm. LOGO IS TO E +/- mm ON HORIZONTL PLNE (EN TO EN). EL/EZEL OME -0-0. PPLY FILM-URETHNE PROTETNT 090-0-000 T OTTOM OF ENTRNE OOR TO PENT SUFFMRKS.. PPLY PROTETOR -0-000 TO WTER HETER OOR LTH. 0 00 00 90 () 0 EL/EZEL OME -0-0 EL-HORSEPOWER 0 FLEXSRIPT -0-0 ()(F) EL-HORSEPOWER 0 FLEXSRIPT -0-0 (LT) 0 (PSSENGER SIE) 0 (RIVER SIE) EL-LOGO MERIIN LG 9-0-0 PLTE-FREIGHTLINER LG (HSSIS SUPPLIE) ORIG. TE FIRST USE MTERIL:. 09//0 0 P SER MERIIN SPEIFITION PRINT O T SLE (LT) FRTL,90 0 HP.L SP () FRTL,000 0HP.L -SP (F) FRTL,0 0HP.L -SP (P) MSK FRONT EXT PROTETIVE () EXT FULL OY PINT PKG # (9) EXT FULL OY PINT PKG # () EXT FULL OY PINT PKG # () EXT FULL OY PINT PKG # (H) EXT FULL OY PINT PKG # GRPHIS INSTL - FP OF REF PRT 000 OPYRIGHT 009 WINNEGO INUSTRIES, IN. 0//09
WG 000 () (9) () FIRST USE 00 P-SERIES (MERIIN) SPEIFITION PRINT O T SLE GRPHIS INSTL - FP PRT 000
WG 000 () (H) FIRST USE 00 P-SERIES (MERIIN) SPEIFITION PRINT O T SLE GRPHIS INSTL - FP PRT 000
R WG UNIT TE RELESE 09----0 0999-0 P0L.... WG 0999 ZONE ISION REOR TE FTR-ORIG 0999-0 --- --- --- --- --- 0999-0 P0T.... 0999-0 ---- --- --- --- --- 0999-0 PY.... 0999-0 P9N 0 0 00 EL-LOGO W 000--0 () EL-LOGO,JOURNEY,OME,LG 09-0-0 () 0 PLTE-FREIGHTLINER SML (HSSIS SUPPLIE) EL-LOGO,MXUM HSSIS 9-0-0 EL-LOGO OME -0-0 () (PSSENGER SIE) (RIVER SIE) 0 () 0 (PSSENGER SIE) 00 (RIVER SIE) EL-LOGO,EXPRESS 9-0-0 (LRGE) 9-0-0 (SMLL) (PSSENGER SIE) (RIVER SIE) 0 (PSSENGER SIE) 0 (RIVER SIE) TES: REQUIRE FOR P0L N P0T ONLY. SMLL EXPRESS LOGO ON FRONT EN N LRGE EXPRESS LOGOS ON SIEWLLS N KWLL. 0 ENTER ON LOGO.. (LRGE) 9 (SMLL) EL-LOGO,JOURNEY,OME,SML 09-0-0 9. IE UT RYLI FILM TO PROTET UNIT (KIT-PINT PROTETION -0-000). PSSENGER SIE OF UNIT SHOWN, RIVER S SIE OPPOSITE.. EN PNELS OF SLIEOUT ROOMS WILL E PINTE WITH SEOT N LER OT ONLY. THERE WILL E OLORE ESIGN GRPHI ELEMENTS PINTE ON THE EN PNELS.. PPLY SELER OY SEM LER 90-0-000 TO HELP SEURE EGES.. USE -0-000 (00 FT) TO OVER UNSELE ROOF SEMS.. LER OT TO E PPLIE ON ENTIRE UNIT TO PROTET PINT.. TOLERNE FOR IMENSIONS IS +/-0mm. LOGO IS TO E +/- mm ON HORIZONTL PLNE (EN TO EN). EL/EZEL OME -0-0. PPLY FILM-URETHNE PROTETNT 090-0-000 T OTTOM OF ENTRNE OOR TO PENT SUFFMRKS.. PPLY PROTETOR -0-000 TO WTER HETER OOR LTH. 00 00 0 EL/EZEL OME -0-0 0 90 () 0 EL-HORSEPOWER 0 FLEXSRIPT -0-0 ()(F) EL-HORSEPOWER 0 FLEXSRIPT -0-0 (LT) EL-LOGO,JOURNEY,OME,LG 09-0-0 PLTE-FREIGHTLINER LG (HSSIS SUPPLIE) ORIG. TE FIRST USE 09//0 0 P JOURNEY MTERIL: SPEIFITION PRINT O T SLE (LT) FRTL,90 0HP.L SP () FRTL,000 0HP.L -SP (F) FRTL,0 0HP.L -SP (P) MSK FRONT EXT PROTETIVE () EXT FULL OY PINT PKG # (9) EXT FULL OY PINT PKG # () EXT FULL OY PINT PKG # () EXT FULL OY PINT PKG # (H) EXT FULL OY PINT PKG # (L) EXT FULL OY PINT PKG # GRPHIS INSTL - FP OF REF PRT 0999. OPYRIGHT 009 WINNEGO INUSTRIES, IN. 0//09
WG 0999 () (9) () FIRST USE 00 P-SERIES (JOURNEY) SPEIFITION PRINT O T SLE GRPHIS INSTL - FP PRT 0999
WG 0999 () (H) (L) FIRST USE 00 P-SERIES (JOURNEY) SPEIFITION PRINT O T SLE GRPHIS INSTL - FP PRT 0999
WG RELESE TE WG 0 0-0 ZONE ISION REOR TE FTR-ORIG 0-0 SHT SHT UPTE GEOMETRY LER SM 990-0 WS -0 0//0 L LER SM-UPPER -0-0 SEL-RKET 9-0-000() OF VEHILE 9 RIVET -0-0() RIVET -0-0() LER SM-LOWER 990-0-0 FREIGHTLINER OPYRIGHT 009 WINNEGO R INUSTRIES, IN. FTR ORIG. TE HKR LL IMENSIONS RE P.E. IN MILLIMETERS M.E. FIRST USE SNR 0 M-SERIES UNSPEIFIE TOLERNES RE: WHOLE IM (X) MTERIL: ONE-PLE (X.X) TWO-PLE (X.XX) NGLE. 0.0 THIR NGLE PROJETION O T SLE RWING LER INSTL OF PRT 0 REF: //009
WG 0 L OF VEHILE LER SM-UPPER -0-0 SEL-RKET 9-0-000() 9 RIVET -0-0() RIVET -0-0() LER SM-LOWER 990-0-0 WORKHORSE FIRST USE 0 M-SERIES O T SLE RWING LER INSTL PRT 0 //009
RELESE TE WG 09 ZONE ISION REOR TE FTR-ORIG FLOOR SM-LOWER 0-0-XXX X MIRROR SM -0-HT GSKET-MIRROR 0-0-000 9-0-HT () WSHER-'SUNK 9-0-HT () H H NGLE-SUPPORT,TRIM -0-HT () -0-HT () TRIM-OVER 0-0-HT () 000G-0-09 () G G 0 RIL-WNING -0-HT 000G9-0-T (9) RIL-WNING -0-HT () SIEWLL SM-RIGHT 0-0-XXX 0-0-XXX 09 K K FLOOR SM-RER,UPPER 999-0-XXX P SM-ROOF -0-HT RETINER- 9-0-HT()(UP TO 0--0) P-,RETINER 9-0-HT()(UP TO 0--0) 000G9-0-T()(UP TO 0--0) 0G0--0()(FTER 0--0) E F F E J J ROOF SM 0-0-XXX FLOOR SM-UPPER 0-0-XXX FLOOR SM-RER,UPPER 999-0-XXX PLTE-W/HOLES 0-0-HT KWLL SM 09-0-XXX. INSTLL OOR SM-ESS TO E REMOVELE FROM ELOW(THRU HSSIS).. TTH SE OF SUPPORT IRETLY TO FLOOR PLYWOO. SIEWLL SM-LEFT 0-0-XXX 0-0-XXX 09 0. PPLY URETHNE HESIVE TO TOP OF HSSIS FLOOR FRME STRUTURE PER ES00. X MIRROR SM -0-HT 00-0-HT () 09 WIWS - SE-GI X MIRRORS-EXTERIOR W/EFROST 9. MUFLP N/OR ROKGUR TO E 0mm MIN FROM TIRE WHEN INSTLLE. OPYRIGHT 00. FOR SETIONS THRU Z SEE WG 0.. FOR WHEEL LINERS, LUG WRENHES N VLVE EXT. TIGHTENING LUG S SEE RWING -0-000. TRIM-EN P -0-HT () -0-HT () FTR HKR R ORIG. TE WINNEGO INUSTRIES, IN. LL IMENSIONS RE. PRE RILL SIEWLL SKIN EFORE FSTENING WITH S. P.E. M.E. IN MILLIMETERS FIRST USE. TORQUE S TO - FT/LS. TRIM-RETINER -0-HT () SNR UNSPEIFIE TOLERNES RE: WHOLE IM (X) MTERIL: 0 P0L. TUM FROM EGE OF FLOOR ONE-PLE (X.X). PPLY HESIVE-LOTITE 9-0-000 (LUE) TO S. PLS MUFLP OMPL 09-0-XXX () MUFLP OMPL 09-0-XXX () TWO-PLE (X.XX) NGLE THIR NGLE PROJETION. INNER RER WHEELS RE STEEL O T SLE RWING. EXTENSION USE WITH LINER OR LUMINUM WHEELS OY INSTL-PNEL & TRIM TES: OF PRT 09 REF: /0/00
WG 09 09-0 00 SERIES 00 SERIES P SERIES R SERIES 00000 MU FLP-L 0000U OLT 0009000U 090HT PLTE-MUFL ITEM PRT ESRIPTION QTY NUMER FIRST USE 0 MOTORHOMES O T SLE RWING MU FLP OMPL PRT 09 0//009
WG 09 09-0 00 SERIES P SERIES R SERIES 009000 MU FLP-L 0000U OLT 0009000U 090HT PLTE-MUFL ITEM PRT ESRIPTION QTY NUMER FIRST USE 0 S-SERIES O T SLE RWING MU FLP OMPL PRT 09 0//009
-0-0, -0-0 KEY PRT NUMER U/M ESRIPTION VER. 00--00 E GLSS/FLT-W/HET ELEMENT 090 00--00 E GLSS/ONVEX 090 00--0 E TUTOR - ONVEX GLSS 0 00--0 E MOTOR - FLT GLSS 0 00--0 E GLSS/ONVEX-T/HOUSING 09 KIT -0-00 E LIGHT/TURN SIGNL - MER 0-0-00 E OVER/P - OTTOM Q09-0-0 E P - RETNGULR (VELV) 09-0-0 E RKET/MOUNT - MIRROR 0900-0-0 E GSKET/MOUNT - MIRROR 0900-0-0 E SET - /"- X." 00 OPYRIGHT 009 WINNEGO INUSTRIES IN.
-0-0 KEY PRT NUMER U/M ESRIPTION VER. 00--00 E GLSS/FLT-W/HET ELEMENT 090 00--00 E GLSS/ONVEX 090 00--0 E GLSS/ONVEX-T/HOUSING 09 KIT -0-00 E LIGHT/TURN SIGNL - MER 0-0-00 E KIT( VR LK)ROUN/OVL -0-00 E P/SE - LK - PKG OF Q090-0-00 E MOTOR OPYRIGHT 009 WINNEGO INUSTRIES IN.
WG 9 0 STPLE (/R) NGLE-PLSTI -0-HT EXTERIOR 9 SETION - () TOOLING HOLE 9 X SLOT 0 0 00 HNNEL-KWLL 0-0-000 HNNEL-KWLL 0-0-000 9 0 () MFG HOLE EXTERIOR 0 90 9 TUM NGLE 0--0 HNNEL-KWLL 0-0-000 TRIM NGLE --0 TOP OF HSSIS RIL SETION - 0 VEHILE FIRST USE 0 P0T O T SLE RWING. THRU EXTERIOR SURFE N FOM. KWLL SM PRT 9
WG TRIM-RER,P -0-0 000G-0- () PNEL SM-RER P 90-0-0 TRIM-RER,P 090-0-0 000G-0- () MOLING-TRIM 099-0-0 (REF LENGTH ) 000G-0- () TRIM-RER,P 090-0-0 000G-0- () MOLING-TRIM 099-0-0 (REF LENGTH ) E SHIEL-ENGINE,RH,FRTLNR 0-0-0 000G9-0-0 () P0L P0T ETIL G SHIEL-ENGINE,TR,FRTLNR 0-0-0 000G9-0-0 () ETIL SHIEL-ENGINE,LH,FRTLNR 0-0-0 000G9-0-0 () F F E OOR OMPL-RER ENGINE 909-0-W FIRST USE 0 P0L O T SLE RWING RER P INSTL PRT //009
WG 000G9-0-0() (TOP) 000G-0-0() (TM) 0.0 KWLL (REF) -/-0X/ PTH 000G-0- () WSHER-SPRING,ONIL -0-000 () ETIL G.0 SPRING-GS 9-0-000 RKET SM-GS SPRING 9-0-0 -PN,HE 000G9-0- () ETIL RKET-UMPER,HITH 9-0-0 OLT-HEX-SER FLG 000-0-() 0009-0-00 WSHER 9-0-0 P0L P0T NGLE-MOUNT,WHEEL LIP 9-0-0(UP TO 0--09) 9-0-0(FTER 0--09) 000G9-0-0 () OLT-HOO JUSTING 0-0-000 () 0009-0-00 () RKET SM-LTH,RH 9-0-0 -PN,HE 000G9-0- () RKET SM-LTH,LH 9-0-0 -PN,HE 000G9-0- ().0 SETION E-E (LH OPPOSITE) ( PLS). 9.0 FIRST USE 0 P0L SETION F-F O T SLE RWING. FSTEN FREIGHTLINER SUPPLIE TRNSMISSION RESERVOIR N PLTE TO KWLL S SHOWN. RER P INSTL TES: PRT //009
WG 909 ETIL.. ETIL 909-0 SETION - 90000 KEY & LOK 0009000U 9000XXX PNEL SM-O 00HT HINGE-TRUNK 0HT RKET-GS 000G90U -PN,HE 0 900000 LTH SM-TW 90XXX GRILLE SM- ITEM PRT NUMER ESRIPTION QTY FIRST USE 0 P-SERIES O T SLE RWING OOR OMPL-RER ENGINE PRT 909
WG ROOM SM-SLIEOUT SLUG SM-SLIEOUT PNEL SM-SLIEOUT,RH PNEL SM-SLIEOUT,LH RELESE TE WG 0 0-0 0--XXX 0--XXX 9--XXX 9--XXX ZONE ISION REOR TE FTR-ORIG 0-0 0--XXX 0--XXX 9--XXX 9--XXX 09. PREP SURFE WITH ISOPROPYL LOHOL 9000-0-000.. STOP LOK TO E POSITIONE IN HOLES ESIGNTE FOR 0" STROKE LENGTH. ROOM SM-SLIEOUT (SEE T). SEE ES000 FOR SLIEOUT ROOM ONSTRUTION.. MXIMUM RUNNING MPS T TO EXEE 0 MPS WITHOUT SLIE ROOM OVER N MPS WITH OVER T F. 0. FOR MNUL RETRT ISONNET V WIRING TO THE MOTOR, RELESE THE MOTOR RKE, N RETRT USING /" SOKET T THIS LOTION. 9. TRIM PLSTI ORNERS SO THT THEY RE HIEN UNER RPET.. UL SEL TO OTTOM OF FLOOR SM-UPPER THRU RER LEG OF SEL.. LOTE FOM OVER RIN HOLES IN EXTRUSION. OVER SM 0--WK0 000G9-0-0U () WSHER 00-0-000 () RKET SM 0-0-0 PLTE SM 99-0-0 () 0009-0-00 (). LMP OR WIRE TIE LL HOSES T 900mm INTERVLS MX. & WHERE NEESSRY TO PENT HOSES FROM ONTTING MOVING PRTS OR HET PROUING ITEMS.. LL HOSES MUST HVE 0mm MIN. RIUS TO VOI KINKS OR FLOW RESTRITIONS. OVER LL HOSES FULL LENGTH ELOW OH FLOOR WITH ONUIT 09-09-000. TORQUE LL OLTS PER ES00 UNLESS OTHERWISE SPEIFIE. (SEE TLE ELOW) SIZE / - 0 (.0) / - (.) / - (.) / - (.) / - (.00) TORQUE VLUE (FT-LS) (IN-LS) (FT-LS) (FT-LS) (FT-LS) (FT-LS) OVER SM 0--UJ 000G9-0-0U () WSHER 00-0-000 () RKET SM 0-0-0 PLTE SM 99-0-0 () 0009-0-00 () SET ELT INSTL 9--XXX SET ELT INSTL 9--XXX Z 0 0 W 09 WIWS - SE-GI. USE POLY-LER 00-0-000 N TTH IT USING WSHER 0-0-000 TO PROTET THE SLIEOUT FLOOR. W L INETTE INING TLE/HIRS 0. POSITION SEL FLUSH WITH LOWER TRIM N TIGHT GINST INNER TRIM. E Z LOUNGE HIRS- EURO LETHER LOUNGE SETING-THETER STYLE 9. S NT E REUSE. NY TIME IS REMOVE IT MUST E ISRE N REPLE WITH NEW TO INSURE THE THRES SEL. 0 RESTESY SGL F LH 0X RESTESY SGL UL LH 0X 0 RESTESY UL F LH 0X. USE 000G9-0-0S TO HOL EH EN OF TRIM. RESTESY UL UL LH 0X. SEE SELNT MNUL. OPYRIGHT 009 WINNEGO. LOOSEN OLTS TO LLOW ROOM TO MOVE SIE TO SIE ON THE MOUNTING RKETS UNTIL IT IS ENTERE IN THE OPENING. TIGHTEN FTER LL JUSTMENTS RE OMPLETE. FTR R ORIG. TE INUSTRIES, IN.. LOOSEN JM S N JUST OLT TO MOVE ROOM UP OR OWN TO E ENTERE IN THE SIEWLL OPENING. TIGHTEN FTER LL JUSTMENTS RE OMPLETE.. THIS IS MINL IMENSION; THE PRTS SHOUL E JUSTE S REQUIRE FROM THERE.. THE RETRTE LENGTH IS JUSTE Y THREING THE STOP OLT IN OR OUT UNTIL THE OUTSIE WLL OF THE ROOM SELS GINST THE SIEWLL. RKET-WIRE RRIER -0-0 (INSTLL WITH RKET SM) RKET SM 9-0-0 () OLT 000-0-0 () 000-0- () WSHER 000E--00 () 0009-0-00 () 0009-0-00 () HKR P.E. M.E. SNR UNSPEIFIE TOLERNES RE: WHOLE IM (X) ONE-PLE (X.X) TWO-PLE (X.XX) MTERIL: LL IMENSIONS RE IN MILLIMETERS FIRST USE 0 P0L NGLE. THE EXTENE LENGTH IS JUSTE Y TURNING THE LOK S ON THE PISTON ROS IN OR OUT UNTIL THE SLIEOUT ROOM SELS GINST THE SIEWLL. SLIEOUT-ELETRI 00-0-000 () THIR NGLE PROJETION O T SLE RWING. FOR ITIONL INFORMTION SEE WIRE INSTLLTION FRONT EN N THE LEVELING JK INSTLLTION RWINGS. SLIEOUT OMPL-FRT,LH TES: OF PRT 0 REF: /9/009
L RKET SM-HIR,HOL OWN 09-0-0 000G9-0-U () ( TO FLOOR SM-SLIEOUT) RKET SM-HIR,HOL OWN 09-0-0 () E 000G9-0-U () ( TO FLOOR SM-SLIEOUT) WG 0 9 FROM TUM TRIM-SEL 99--0 000G-0- () RETINER 90--0 ROOF SM-SLIEOUT -0-0 9 TRIM-FETURE-UPPER -0-0 () 9-0-0 (0) LTH SM-TRVEL -0-0 000G9-0-0T () E OVER-ORNER -0-0 () ORNER-KEY 0-0-0 () WNING SM --0 OVER-TRIM,SLIEOUT -0-0 -0-0 000G9-0-U (9) PNEL SM-SLIEOUT,RH (SEE T) 000G-0- () E SLUG SM-SLIEOUT (SEE T) 9 FILM 09-9-0 () (0) PNEL SM-SLIEOUT,LH (SEE T) 000G-0- () TRIM-SEL,INNER 9--0 000G-0- () F G TRIM-KIT EXTERIOR 9-- 9-0-0 () INSERT 0-0- 9 P-TUE -0-0 000G-0-0 () F LOK-SEL 0-0-0()(UP TO 0-0-09) 0-0-0()(FTER 0-0-09) 000G9-0-U () TRIM-FETURE,LOWER 0-0-0 9-0-0 () 9 P EN,TRIM 9-0-0 9-0-0 000G9-0-0 () (FROM EGE OF SLUG) G RKET-MOUNT,SLIEOUT ROOM 0-0-0 OLT 000-0- () -ROSS OWEL -0-0 () OLT 000-0- () (FROM EGE OF SLUG) RKET-MOUNT,SLIEOUT ROOM 0-0-0 OLT 000-0- () -ROSS OWEL -0-0 () OLT 000-0- () 9 FOM PLUG 0-9-000 () TRIM-FETURE,LOWER 0-0-0 9-0-0 () TRIM-SEL,INNER 9--0 000G-0- () P-TUE -0-0 000G-0-0 () ROOM SM-SLIEOUT (SEE T) FLOOR SM-SLIEOUT -0-0 E LOUNGE HIRS- EURO LETHER L INING TLE/HIRS 9 EXTERIOR PINT-I FIRST USE 0 P0L ROLLER SM 0-0-0() 000G9-0- (9) RMP SM-SLIEOUT -0-Y () () 000G-0- () O T SLE RWING SLIEOUT OMPL-FRT,LH PRT 0 /9/009
WG 0 SIEWLL SM SLUG SM-SLIEOUT SLUG SM-SLIEOUT PNEL SM-SLIEOUT PNEL SM-SLIEOUT WNING SM SEL TRIM SM-SLIEOUT -0-000 SEL 0-0-000 000G-0-0U (EXT)() 000G9-0-0U () SEL SEL-TRINGLE 0-0-000 (900) (PPLY ROSS TOP & OWN OTH SIES) 9 ROOF SM-SLIEOUT TRIM SM-SLIEOUT -0-000G-0-0U (EXT)(9) 000G9-0-0U (9) SEL SIEWLL SM TRIM SM-SLIEOUT -- 000G-0-0U (EXT)(9) 000G9-0-0U (9) ROOF SM-SLIEOUT SLUG SM-SLIEOUT RETINER --0 000G9-0-9 (9) SIEWLL SM RETINER --0 000G9-0-9 (9) SETION - WNING RKET -0-0 () WNING-SPER --0 () 000G9-0-T (0) SETION - SETION - SETION - SELNT WRP LUMINUM ROUN ORNER PNEL SM-SLIEOUT FLOOR SM-SLIEOUT ROOF SM-SLIEOUT OVER SM-RMP 09--0 000G-0- () (S MUST E 'SUNK mm ELOW SURFE OF PLSTI) PNEL SM-SLIEOUT SETION F-F SETION E-E RKET-LOSEOUT,SLIEOUT 00-0-0 000G9-0-0T () RKET-LOSEOUT,SLIEOUT 00-0-0 000G9-0-0T () SETION GH-GH (ROTTE) J SLUG SM-SLIEOUT FOM -0-000() HESIVE 0-0-000 SEL-FLOOR -0-000 (00) FLOOR SM-SLIEOUT MIN FLOOR GH GH STRIP-POLYETHYLENE 09-0-000 STPLE FLOOR SM-UPPER 9-0-HT () 000G-0-U () 000G9-0- () SEL RETINER 9-0-0 000G9-0- () (RH SIE ONLY) FIRST USE 0 P0L O T SLE RWING SETION G-G RMP-SLIEOUT 0--0 VIEW J (OTH ENS OF SEL) SLIEOUT OMPL-FRT,LH PRT 0 /9/009
WG 0 TPE-UHMW 0-0-0 ROOF SM-SLIEOUT TRIM SM-SIEWLL 9TTO--000 (0MM) LIGN WITH TOP OF TRIM SM SIEWLL TRIM SM-SLIEOUT SETION - ROOF SM-SLIEOUT TPE-OULE SIE " -0-000() () 9 PLSTI-S,OIL 09-09-0 ().0 RPET-HEMME -9-XXX P 0-0-000 () TUE-RIN -0-0 WIRE TIE 00-0-000 SPEE FLT 0-0-000 (PPLY SELNT ROUN SIEWLL OPENING INSTLL TUE WITH EXTERIOR HOLE FING OWN.) 90.0 TPE-OULE SIE " -0-000 () SETION - SLUG SM-SLIEOUT FIRST USE 0 P0L O T SLE RWING SETION - SLIEOUT OMPL-FRT,LH PRT 0 /9/009
WG 0 FLOOR SM-SLIEOUT FLOOR SM-UPPER 9 0 0009-0-00 () SETION EE-EE ROTTE 90 (TRVEL) EE RRIER -0-0 RIVET -0-0() E TUM E RKET-WIRE RRIER REF. SETION E-E SETION EF-EF (TYPIL OTH RMS) -- 9 REF 90 REF.0 EE.0 -- FIRST USE 0 P0L O T SLE RWING 0 EF 0 EF SLIEOUT OMPL-FRT,LH PRT 0 /9/009
WG ROOM SM-SLIEOUT SLUG SM-SLIEOUT RELESE TE WG 0 0-0 0--XXX 0--XXX ZONE ISION REOR TE FTR-ORIG 0-0 0--XXX 0--XXX 09 ROOM SM-SLIEOUT (SEE T). STOP LOK TO E POSITIONE IN HOLES ESIGNTE FOR 0" STROKE LENGTH.. MXIMUM RUNNING MPS T TO EXEE 0 MPS WITHOUT SLIE ROOM OVER N MPS WITH OVER T F. 0. FOR MNUL RETRT ISONNET V WIRING TO THE MOTOR, RELESE THE MOTOR RKE, N RETRT USING /" SOKET T THIS LOTION. 9. SEE ES000 FOR SLIEOUT ROOM ONSTRUTION. JUST THE IR RM MOUNT TO HIEVE mm OF FLL IN THE RM RM WHEN EXTENE.. USE 000G9-0-T TO HOL PNEL EGES.. THE VLVES ON THE HYRULI PUMP MUST E OPEN TO MNULLY RETRT ROOM.. FOR MNUL RETRT REMOVE SET N TURN RO WITH WRENH -0-000 LOKWISE ON EH RM EVENLY UNTIL ROOM IS FULLY RETRTE. RO MUST E FULLY UNE TO LLOW ROOM TO OPERTE. WRENH IS LOTE IN THE INFO SE.. LMP OR WIRE TIE LL HOSES T 900mm INTERVLS MX. & WHERE NEESSRY TO PENT HOSES FROM ONTTING MOVING PRTS OR HET PROUING ITEMS.. LL HOSES MUST HVE 0mm MIN. RIUS TO VOI KINKS OR FLOW RESTRITIONS. OVER LL HOSES FULL LENGTH ELOW OH FLOOR WITH ONUIT 09-09-000 SET ELT INSTL 9--XXX Q OVER SM 0-9-O 000G9-0-0U () WSHER 00-0-000 () RKET-RM 0-0-0 PLTE SM 99-0-0 () 0009-0-00 (). TORQUE LL OLTS PER ES00 UNLESS OTHERWISE SPEIFIE. (SEE TLE ELOW) SIZE TORQUE VLUE (FT-LS) / - 0 (.0) (IN-LS) / - (.) (FT-LS) / - (.) (FT-LS) / - (.) (FT-LS) / - (.00) (FT-LS). USE POLY-LER 00-0-000 N TTH IT USING WSHER 0-0-000 TO PROTET THE SLIEOUT FLOOR. 0. POSITION SEL FLUSH WITH LOWER TRIM N TIGHT GINST INNER TRIM. 9. S NT E REUSE. NY TIME IS REMOVE IT MUST E ISRE N REPLE WITH NEW TO INSURE THE THRES SEL.. USE 000G9-0-0S TO HOL EH EN OF TRIM. OVER SM 0--UJ 000G9-0-0U () WSHER 00-0-000 () RKET-RM 0-0-0 PLTE SM 99-0-0 () 0009-0-00 () 09 WIWS - SE-GI Q SOF/SLEEPER-ULTRLETHER HP. SEE SELNT MNUL. OPYRIGHT 009 WINNEGO. LOOSEN OLTS TO LLOW ROOM TO MOVE SIE TO SIE ON THE MOUNTING RKETS UNTIL IT IS ENTERE IN THE OPENING. TIGHTEN FTER LL JUSTMENTS RE OMPLETE. FTR R ORIG. TE INUSTRIES, IN.. LOOSEN JM S N JUST OLT TO MOVE ROOM UP OR OWN TO E ENTERE IN THE SIEWLL OPENING. TIGHTEN FTER LL JUSTMENTS RE OMPLETE. HKR P.E. LL IMENSIONS RE IN MILLIMETERS M.E. FIRST USE. THIS IS MINL IMENSION; THE PRTS SHOUL E JUSTE S REQUIRE FROM THERE.. THE RETRTE LENGTH IS JUSTE Y THREING THE STOP OLT IN OR OUT UNTIL THE OUTSIE WLL OF THE ROOM SELS GINST THE SIEWLL. SLIEOUT-ELETRI 00-0-000 SLIEOUT-ELETRI 00-0-000 SNR UNSPEIFIE TOLERNES RE: WHOLE IM (X) ONE-PLE (X.X) TWO-PLE (X.XX) NGLE MTERIL: 0 P0L. THE EXTENE LENGTH IS JUSTE Y TURNING THE LOK S ON THE PISTON ROS IN OR OUT UNTIL THE SLIEOUT ROOM SELS GINST THE SIEWLL. THIR NGLE PROJETION O T SLE RWING. FOR ITIONL INFORMTION SEE WIRE INSTLLTION FRONT EN N THE LEVELING JK INSTLLTION RWINGS. SLIEOUT OMPL-FRT,RH TES: OF PRT 0 REF: /9/009
WG 0 SUPPORT SM-ROOF -0-0 TRIM-SEL 900-0-0 000G-0- () ROOF SM-SLIEOUT -0-0 000G-0- () K L L FROM TUM TRIM-FETURE,UPPER -0-0 () (90) 9-0-0 (9) 9 OVER-ORNER -0-0 () ORNER-KEY 0-0-0 () K WNING SM --0 LTH SM -0-0 000G9-0-0T() OVER-LTH 9-0-0 000G-0-T () E PNEL SM-SLIEOUT 90--XXX 000G-0- () E PNEL SM-SLIEOUT 90-0-XXX 000G-0- () TRIM-SEL,INNER 9--0 000G-0- () F G TRIM-KIT EXTERIOR 9-0- INSERT 0-0- (0) 9-0-0() 9 H TRIM-SEL,INNER 9--0 000G-0- () H F 9 TRIM-FETURE,LOWER 00-0-0 () 9-0-0 () LOK-SEL 0-0-0()(UP TO 0-0-09) 0-0-0()(FTER 0--09) 000G9-0-U () 0 RKET-MOUNT,SLIEOUT 0-0-0 OLT 000-0- () -ROSS OWEL -0-0 () OLT 000-0- () SLUG SM-SLIEOUT (SEE T) G RKET-MOUNT,SLIEOUT 0-0-0 OLT 000-0-U () -ROSS OWEL -0-0 () OLT 000-0- () EN PS 9-0-0 (LH) 9-0-0 (RH) 000G9-0-0 () FOM LOK 0-9-000 () ROLLER SM-GLIE 0-0-0 () RKET SM-ROLLER 09-0-0 () 000G9-0-0T () WSHER 000E-0-00 () ( PER ROLLER, ON EH EN OF SHFT.) LUMER-RIUS -0- SEL-SIGHT SHIEL -0-0 (0) 000G9-0-U (0) OVER-WIRE -0-0 000G9-0-U () FLOOR SM-SLIEOUT -0-0 FIRST USE ROOM SM-SLIEOUT (SEE T) 0 P0L O T SLE RWING SLIEOUT OMPL-FRT,RH PRT 0 /9/009
WG 0 SLUG SM-SLIEOUT SLUG SM-SLIEOUT SIEWLL SM SEL WNING RKET -0-0 () WNING SPER --0 () 000G9-0-T (0) 9 RETINER 90-0-0 000G9-0-09 () TRIM-SIEWLL -0-000 SEL 0-0-000 000G9-0-0U () 000G-0-0U ()(EXT) ROOF SM-SLIEOUT SEL SLUG SM-SLIEOUT PNEL SM-SLIEOUT TRIM-SIEWLL -- 000G-0-0U (EXT)() 000G9-0-0U () RETINER --0 G9-0-9 (9) PNEL SM-SLIEOUT TRIM-SIEWLL -0-000G9-0-0U () 000G-0-0U ()(EXT) RETINER --0 000G9-0-9 (9) SETION - SEL SIEWLL SM M SEL-TRINGLE 0-0-000 (0) (PPLY ROSS TOP & OWN OTH SIES) M SETION - ROOF SM-SLIEOUT SLUG SM-SLIEOUT SETION - SETION - 9 WRP LUMINUM ROUN ORNER OVER-LTH,TRVEL REF 9RPT-0-000 SELNT ROOF SM-SLIEOUT PNEL SM-SLIEOUT FLOOR SM-SLIEOUT PNEL SM-SLIEOUT LUMER-EV SIE 099-K-00 () SETION E-E SETION F-F TUE-RIN -0-0 SETION K-K WIRE TIE 00-0-000 SPEE FLT 0-0-000 (PPLY SELNT ROUN SIEWLL OPENING. INSTLL TUE WITH EXTERIOR HOLE FING OWN.) 0 9RPT-0-000 9 0 0 SIEWLL TRIM SM TPE-UHMW 0-0-HT 00 SLIEOUT-FLOOR SLUG SM-SLIEOUT SETION L-L ROTTE SLIEOUT-SLUG SEL-SLIEOUT 0-0-000 (00) PLTE-SEL 0-0-0(FTER --09) 000G-0-0 ()(FTER --09) 0 () FLOOR SM-SLIEOUT J J SEL-SIGHT SHIEL REF SETION J-J SETION H-H NGLE -0-0(FTER --09) -0-0(FTER --09) -0-0(FTER --09) 000G-0-U()(FTER --09) SETION G-G FLOOR SM-UPPER RKET-ZEE -0-0 () 000G9-0-U () SETION M-M RIN PN 0-0-0 () 000G-0- () FIRST USE 0 P0L O T SLE RWING SLIEOUT OMPL-FRT,RH PRT 0 /9/009
WG 0 0009-0-00U () SLUG SM-SLIEOUT FLOOR SM-SLIEOUT RKET-WIRE RRIER -0-0 0009-0-00U () () () RRIER-LE -0-0 (UP TO 09-0-09) -0-0 (FTER 09--09) RIVET -0-0() RKET SM 9-0-0 () OLT 000-0-0 () 0009-0-00 () OLT 000-0- () 0009-0-00 () SETION - NGLE-FORME -0-0 000G9-0-0U () SETION - SETION - (TYPIL OTH RMS) -- REF 9 REF.0.0 -- FIRST USE 0 0 P0L O T SLE RWING 0 SLIEOUT OMPL-FRT,RH PRT 0 /9/009
WG ROOM SM-SLIEOUT SLUG SM-SLIEOUT RELESE TE WG 0 0-0 0--XXX 0--XXX ZONE ISION REOR TE FTR-ORIG 0-0 0--XXX 0--XXX 09 ROOM SM-SLIEOUT (SEE T). TORQUE TO 0 FT-lb.. JUST UMPER HEIGHT SO THT E WILL OPERTE SMOOTHLY. JUST SO THT E FRME IS FLT.. TORQUE LL OLTS PER ES00 UNLESS OTHERWISE SPEIFIE. (SEE TLE ELOW) SIZE / - 0 (.0) / - (.) / - (.) TORQUE VLUE (FT-LS) (IN-LS) (FT-LS) (FT-LS) / - (.) (FT-LS) / - (.00) (FT-LS). USE POLY-LER 00-0-000 N TTH IT USING WSHER 0-0-000 TO PROTET THE SLIEOUT FLOOR. FRME SM-SUPPORT,SLIEOUT 90--0 000G9-0-U () 0. POSITION SEL FLUSH WITH LOWER TRIM N TIGHT GINST INNER TRIM. 9. S NT E REUSE. NY TIME IS REMOVE IT MUST E ISRE N REPLE WITH NEW TO INSURE THE THRES SEL. 09 WIWS - SE-GI. USE 000G9-0-0S TO HOL EH EN OF TRIM.. SEE SELNT MNUL.. LOOSEN S TO LLOW ROOM TO MOVE SIE TO SIE ON THE MOUNTING RKETS UNTIL IT IS ENTERE IN THE OPENING. TIGHTEN FTER LL JUSTMENTS RE OMPLETE. SLIEOUT-HY,P 99-0-000 () SUPPORT SM-ROLLER -0-0 () OLT 000-0-0 () FTR R ORIG. TE OPYRIGHT 00 WINNEGO INUSTRIES, IN.. JUST S TO MOVE ROOM UP OR OWN TO E ENTERE IN THE SIEWLL OPENING. TIGHTEN FTER LL JUSTMENTS RE OMPLETE. HKR P.E. LL IMENSIONS RE IN MILLIMETERS M.E. FIRST USE. THIS IS MINL IMENSION; THE PRTS SHOUL E JUSTE S REQUIRE FROM THERE. SNR 0 P0L. THE RETRTE LENGTH IS JUSTE UNTIL THE OUTSIE TRIM OF THE ROOM SELS GINST THE OUTSIE OF THE SIEWLL SLIEOUT MEHNISM 00-0-000 UNSPEIFIE TOLERNES RE: WHOLE IM (X) ONE-PLE (X.X) TWO-PLE (X.XX) NGLE MTERIL:. THE EXTENE LENGTH IS JUSTE UNTIL THE INSIE TRIM OF THE ROOM SELS GINST THE INSIE OF THE SIEWLL. THIR NGLE PROJETION O T SLE RWING. FOR ITIONL INFORMTION SEE WIRE INSTLLTION FRONT EN N THE LEVELING JK INSTLLTION RWINGS. SLIEOUT OMPL-RER,RH TES: OF PRT 0 REF: //00
WG 0 G TRIM-SEL,INNER 900-0-0 000G-0- (9) G ROOF SM-SLIEOUT 90-0-G0 000G-0- (9) TRIM-FETURE,UPPER -0-0 () 9-0-0 () 9 PNEL SM-SLIEOUT -0-XXX 000G-0- () TRIM KIT EXTERIOR 9-- 9 9-0-0 () INSERT 0-0- (9) 9-0-0() 9 FILM 9 09-9-0 ( OTH SIES) TRIM-SEL,INNER 9--0 000G-0- () TRIM-SEL,INNER 9--0 000G-0- () F SLUG SM-SLIEOUT (SEE T) E PNEL SM-SLIEOUT -0-XXX 000G-0- () F OVER-ORNER -0-0 () ORNER-KEY 0-0-0 () E TRIM-FETURE,LOWER 00-0-0 () 9-0-0 () 9 FLOOR SM-SLIEOUT -0-0 PLUG-PLSTI LK 9-0-0() TPE-OULE SIE -0-000(MM)() (WRP TPE ROUN PLUG TO SEUREIT) ROOM SM-SLIEOUT (SEE T) 9 EXTERIOR PINT-I FIRST USE 0 P0L O T SLE RWING SLIEOUT OMPL-RER,RH PRT 0 //00
WG 0 SIEWLL SM WNING SM -0-0 SEL RETINER 90-0-0 000G9-0-09 (9) SLUG SM-SLIEOUT SLUG SM-SLIEOUT TRIM SM -0-000 SEL 0-0-000 000G9-0-0U (0) 000G-0-0U (9)(EXT) PNEL SM-SLIEOUT PNEL SM-SLIEOUT WNING RKET -0-0 () WNING-SPER --0 () 000G9-0-T (0) ROOF SM-SLIEOUT SLUG SM-SLIEOUT TRIM SM --(UP TO 0-0-0) --(FTER 0-0-0) 000G9-0-0U () 000G-0-0U ()(EXT) RETINER -0-0 000G9-0-9 () SEL SIEWLL SM SEL SIEWLL SM TRIM SM -9-(UP TO 0-0-0) --(FTER 0-0-0) 000G9-0-0U () 000G-0-0U ()(EXT) RETINER -0-0 000G9-0-9 () SETION - SETION - SETION - SELNT WRP LUMINUM ROUN ORNER SLUG SM-SLIEOUT PNEL SM-SLIEOUT ROOF SM-SLIEOUT FLOOR SM-SLIEOUT FLOOR SM-SLIEOUT PNEL SM-SLIEOUT SETION - SETION E-E SEL SIEWLL SM TRIM SM -0-000G9-0-U (0) WSHER-W/NEOPRENE 9-0-0 (0) NGLE-W/HOLES --HT SEL-TRINGLE 0-0-000 (000) (PPLY ROSS TOP & OWN OTH SIES) SETION F-F ROOF SM-SLIEOUT SETION G-G FIRST USE 0 P0L O T SLE RWING SLIEOUT OMPL-RER,RH PRT 0 //00
WG 0 SLIEOUT MEHNISM FRME SM-SLIEOUT 000G-0-U () FLOOR SM FROM TUM 9 REF 000G-0-U () 000G-0-0 () 9RPT-0-000 0 9RPT-0-000 FLOOR SM-SLIEOUT OLT 000-0-0U () OLT 0009-0-00U () WSHER 000E--00 () 0 0009-0-00U () FRME SM-SLIEOUT 9RPT-0-000 SETION - SETION - FIRST USE 0 P0L O T SLE RWING SLIEOUT OMPL-RER,RH PRT 0 //00
//00 OUTER TRIM OUTER TRIM INNER TRIM SEL LIP INNER TRIM LIP SEL OUTER TRIM 0G0-0-0 () OUTER TRIM-SIEWLL,SLIEOUT --0 (WHT) -0-0 (LK) INNER TRIM LIP-S TYPE 9-0-000 () 000G9-0-0 () SEL SEL-SLIEOUT 9-0-0 INNER TRIM-SIEWLL,SLIEOUT 0--0 (WHT) 0--0 (LMON) FWELL SW VIEW TRIM SM-SLIEOUT,SIE
//00 OUTER TRIM OUTER TRIM OUTER TRIM INNER TRIM INNER TRIM SEL LIP LIP SEL OUTER TRIM-SIEWLL,SLIEOUT --0 (WHT) -0-0 (LK) 0G0-0-0 () OUTER TRIM SEL-SLIEOUT 9-0-0 LIP-S TYPE 9-0-000 () INNER TRIM 000G9-0-0 () INNER TRIM-SIEWLL,SLIEOUT 0--0 (WHT) 0--0 (LMON) VIEW SEL FWELL SW TRIM SM-SLIEOUT,SIE
-0-0 KEY PRT NUMER U/M ESRIPTION VER. -0-0 E LIMIT - SWITH 99-0-0 E OVER/OOT - SEL 0-0-00 E MOTOR/LH - F/TRVEL LOK 0-0-0 E RKET/MOUNTING - MOTOR 0-0-0 KEY PRT NUMER U/M ESRIPTION VER. -0-0 E LIMIT SWITH 99-0-00 E MOTOR R - F/LH TRVEL LOK 0-0-0 E RKET/MOUNTING - MOTOR 0-0-00 E OVER/OOT - SEL 0-0-0 E EZEL F/MIN HOUSING OPYRIGHT 009 WINNEGO INUSTRIES IN.
WG 9 9-0-00 () 9-0-00 () SET ELT 0-0-HT() RKET SM-RESTRINT 09-0-HT PLTE-RESTRINT 000-0-HT PLTE 000-0-HT RKET 09-0-HT OLT -0-0U() 0-0-HT() OLT -0-0 () ETIL V OLT -0-0U() WSHER E-0-00U() ETIL OLT -0- () SET ELTS 0-0-HT () -HEX LOK,NYLON /X0 0-0-00 OR -HEX W/NYL FLG,/-0 ZN 0-0-HT OLT-RRIGE -0-0U () OLT-ELEVTOR -0-0U() 9-0-00U() RKET SM-MOUNTING 0-0-HT WSHER E-0-00U 0-0-HT () ELT SM PLTE-KING -0-HT G-0-U () PLTE SM 0-0-HT G9-0-U SET ELTS 0-0-HT () ETIL V OLT -0-U () 9-0-00U () RKET SM-MOUNTING 0-0-HT PLTE-RESTRINT 000-0-HT RKET SM-RESTRINT 09-0-HT SET ELTS 0-0-HT () SET ELT 0-0-HT X 0" LK 0-0-HT X 90" LK RKET SM-MOUNTING 0-0-HT FIRST USE 0 MOTORHOMES O T SLE RWING SET ELT INSTL PRT 9
WG 9 ETIL (OTH ENS OF TOP TRIM) ETIL (VERTIL TRIM WITH MITER UT ENS) SEL (REF) 0 TOP TRIM 9--HT SEL (REF) F F TOP RETINER TRIM 90--HT TOP TRIM SLUG HEIGHT LEFT HN VERTIL TRIM 0--HT TOP RETINER TRIM LEFT HN VERTIL RETINER TRIM 0--HT SLUG LENGTH RIGHT HN VERTIL TRIM 0--HT ETIL (TOP TRIM) (VIEWE FROM THE KSIE OF THE TRIM) VERTIL TRIM RIGHT HN VERTIL RETINER TRIM 0--HT OTTOM TRIM (S REQUIRE) 9--HT ETIL (VERTIL TRIM WITH STRIGHT UT ENS) VERTIL RETINER TRIM STNR TRIM KIT (VIEWE FROM THE EXTERIOR OF THE SLIEOUT ROOM) ETIL (OTH ENS OF OTTOM TRIM) ETIL (LL MITER UT VERTIL TRIM) (VIEWE FROM THE KSIE OF THE TRIM) VERTIL RETINER TRIM SEL 9-0-000 (TOTL LENGTH - SEE T) OTTOM TRIM INSTLL SEL TIGHT TO THIS FETURE ON THE LUMINUM TRIM. RETINER TRIM VERTIL TRIM SEL (REF) EXTERIOR TRIM SETION F-F OTTOM SEL 9-0-000 0 ETIL (OTTOM TRIM) VIEWE FROM THE KSIE OF THE TRIM) ETIL (LL STRIGHT UT VERTIL TRIM) (VIEWE FROM THE KSIE OF THE TRIM) FIRST USE 00 MOTORHOMES O T SLE RWING TRIM KIT-EXTERIOR,SLIEOUT PRT 9
WG 9 TOP TRIM 9--HT TOP TRIM (SEON PIEE) 9--HT ETIL SHT (OTH ENS OF TOP TRIM) TOP RETINER TRIM 90--HT ETIL E SHT (TOP TRIM WITH STRIGHT UT ENS T THE SPLIE JOINT) TOP RETINER TRIM (SEON PIEE) 90--HT ETIL SHT (VERTIL TRIM WITH MITER UT ENS) LEFT HN VERTIL TRIM 0--HT RIGHT HN VERTIL TRIM 0--HT LH VERTIL RETINER TRIM 0--HT RH VERTIL RETINER TRIM 0--HT TRIM KIT - WITH SPLIE TOP TRIM (VIEWE FROM THE EXTERIOR OF THE SLIEOUT ROOM) ETIL SHT (VERTIL TRIM WITH STRIGHT UT ENS) O T SPLIE SEL. TTH SEL TO LONGEST TOP TRIM PIEE PRT ONLY. LEVE THE REMINER OF THE SEL LOOSE TO E TTHE URING INSTLLTION OF LUMINUM TRIM. SEL (REF) SEL (REF) TOP EXTERIOR TRIM TOP EXTERIOR TRIM TOP RETINER TRIM TOP RETINER TRIM ETIL E FIRST USE 00 MOTORHOMES (SPLIE IN TOP TRIM.) (SHOWN FROM THE KSIE OF TRIM.) O T SLE RWING TRIM KIT-EXTERIOR,SLIEOUT PRT 9
RELESE TE WG ZONE ISION REOR TE FTR-ORIG OUTER TRIM REF ( LENGTH OF OUTER TRIM ) OUTER TRIM INNER TRIM INNER TRIM SEL (LENGTH OF SEL) SEL. MIN (OTH ENS) OUTER TRIM-SIEWLL,SLIEOUT 9-0-HT 0G0-0-0 () OUTER TRIM LIP-S TYPE 9-0-000 () SEL-SLIEOUT 9-0-HT 000G9-0-0U () INNER TRIM R OPYRIGHT 009 WINNEGO INUSTRIES, IN. FTR ORIG. TE LENGTHS SHOUL E IN 0 mm INREMENTS PER STNR SLIEOUT ROOM LENGTHS EFINE IN ES000. OUTER TRIM MUST E ENTERE ON THE INNER TRIM WITHIN.0. TOLERNE ON THE LIP SPING IS 00.0 MM. VIEW INNER TRIM-SIEWLL,SLIEOUT 9-0-HT 0.0 SEL HKR P.E. M.E. SNR UNSPEIFIE TOLERNES RE: WHOLE IM (X) ONE-PLE (X.X). TWO-PLE (X.XX) MTERIL: LL IMENSIONS RE IN MILLIMETERS FIRST USE 0 SLIEOUTS LOTE LIPS T EH EN N SPE EQULLY LONG THE INNER TRIM. NGLE THIR NGLE PROJETION PPLY S T EH EN N ONE IN THE MILE OF THE OUTER TRIM. O T SLE RWING PPLY THROUGH SEL SO THT IT HOLS THE SEL IN PLE ON THE INNER TRIM. TRIM SM-SLIEOUT,TOP,SGL WIPE TES: OF PRT REF:
RELESE TE WG ZONE ISION REOR TE FTR-ORIG OUTER TRIM REF ( LENGTH OF OUTER TRIM ) OUTER TRIM INNER TRIM INNER TRIM SEL (LENGTH OF SEL) SEL. MIN (OTH ENS) OUTER TRIM-SIEWLL,SLIEOUT 9-0-HT 0G0-0-0 () OUTER TRIM LIP-S TYPE 9-0-000 () SEL-SLIEOUT 9-0-HT 000G9-0-0U () INNER TRIM OPYRIGHT 009 WINNEGO R INUSTRIES, IN. FTR ORIG. TE LENGTHS SHOUL E IN 0 mm INREMENTS PER STNR SLIEOUT ROOM LENGTHS EFINE IN ES000. OUTER TRIM MUST E ENTERE ON THE INNER TRIM WITHIN.0. INNER TRIM-SIEWLL,SLIEOUT 9-0-HT VIEW 0.0 SEL HKR P.E. M.E. SNR UNSPEIFIE TOLERNES RE: WHOLE IM (X) MTERIL: LL IMENSIONS RE IN MILLIMETERS FIRST USE 0 SLIEOUTS TOLERNE ON THE LIP SPING IS 00.0 MM. ONE-PLE (X.X) TWO-PLE (X.XX). LOTE LIPS T EH EN N SPE EQULLY LONG THE INNER TRIM. NGLE THIR NGLE PROJETION PPLY S T EH EN N ONE IN THE MILE OF THE OUTER TRIM. O T SLE RWING PPLY THROUGH SEL SO THT IT HOLS THE SEL IN PLE ON THE INNER TRIM. TRIM SM-SLIEOUT,TOP,LONG WIPE TES: OF PRT REF: