COBRAHEAD The Induction Cobrahead Series can be used in a variety of roadway lighting applications. All of the luminaires The Induction in this Cobrahead Series operate Series well can in cold be temperatures used in a variety with an of Instant roadway On/re-strike lighting applications. capability and are All suitable fixtures for in the use Induction in wet locations Cobrahead (IP65). Series The long operate life and well superior in cold lumen temperatures maintenance with of induction an instant significantly reduce maintenance costs and provide a considerable reduction in the total cost of ownership. ON/re-strike capability and are suitable for use in wet locations (IP 65). The long life and superior lumen maintenance of Induction significantly reduces maintenance costs and provides a considerable reduction in the total cost of ownership. APPLICATIONS Freeways Highways APPLICATIONS - Freeways Public Entrances Highways Off-Street Areas Roadway Lighting Public Entrances Intended to Replace HID Off-Street Areas Roadway Lighting ELECTRICAL ELECTRICAL - Ambient Temperature Rating: -4 F to 04 F -20 C to 40 C Ambient Temperature Rating: -20 C to 40 C Operating Frequency: 250 khz Output Frequency: 250 khz Generator Type: Class P Type Outdoor Generator Type: Class P Type Outdoor THD %: <0% THD %: < 0% Instant On Instant On No Noise Compared to HID Systems No Noise Compared to HID Systems No Lumen Output Variation Over a Wide Range of No Variation Over a Wide Range of Temperatures Temperatures and Through Voltage Fluctuations and Through Voltage Fluctuations Pre-Wired Output Connector (Plug and Play) CSA: 208V-347V Pre-Wired Output Connector CE: 208V-240V 7 (323) fulham.com 599-5000 5000 CHARACTERISTICS Low Lumen Depreciation: >70% Lumen Maintenance at 60,000 Hours Standard CHARACTERISTICS Kevin Temperature - is 5000K: Provides a Cooler Color Temperature Wide Low Range Lumen of Depreciation, Color Temperature >70% at Options 60,000 Available: Hours 2700K 6500K Pre-Wired Standard Input Kevin Connector Temperature is 5000K: Provides a Cooler Temperature CRI Wide > 80 Range of Color Temperature Options Available: 2720K 6500K Vibration Pre-Wired and Input Shock Connector Resistant: No Filament High Quality CRI COMPLIANCE Vibration and Shock Resistant: No Filament UL listed UL 598 (E363375) cul listed UL 598 (E363375) FCC COMPLIANCE Part 8-A - Surge UL listed Immunity UL 598 IEC (E363375) 6000-4-5: Class 4 CSA/CE: cul listed Refer UL to 598 Product's (E363375) CSA/CE Wattage Options FCC Part 8-A CONTACT Surge Immunity FULHAM IEC CLIENT 6000-4-5: SERVICES Class FOR: 4 Luminaires with a full range of lamp color temperatures between 2700K 6500K Lamps specifically designed for use in extreme cold applications or environments Dimming options Replacement components (generators & lamps) also sold separately Color options for finish: Gray, Black, White, Dark Bronze, Green WARRANTY Five-year limited warranty available for Induction Lighting System. See page 43. Check with sales representative for availability. Consult with your sales representative for availability.
CH0 INTEGRATED CAST INDUCTION GENERATOR 40W - 250W INTEGRATED CAST INDUCTION GENERATOR 40W - 250W PHOTOCELL_BLUE (BLUE) LAMP TYPE/WATTAGES Compact Structure, Corrosion Resistant Tubular Tubular Induction Induction Lamps Lamp Available: Available: 40W, 40W, 55W, 55W, Die Standard Cast Aluminum Powder Coated Alloy Housing Finish: Gray 70W, 70W, 80W, 80W, 00W, 00W, 20W, 20W, 50W, 50W, 200W, 200W, 250W 250W Streamlined Corrosion Resistant Contour for High Wind Resistance Adjustable Die Cast Aluminum Projection Alloy Angle Housing Sealed Streamlined Die Cast Contour Generator for High Wind Resistance Clear Clear Flat Tempered Tempered Glass Glass Lens Lens Adjustable Separate Generator Projection and Angle Lamp Compartment or High Curved Purity Polycarbonate Hydro-Formed Lens Aluminum Reflector is Sealed Engineered Die Cast for Generator Reliability & Easy Maintenance Pole Separate Mounted: Generator Diameter and.97-2.63 Lamp Compartment Engineered Photocell (Optional) for Reliability & Easy Maintenance Adjustable Pole Mounted: Installation Diameter Angle:.97"-2.63" 4-Step Adjustable Tempered Glass Installation Lens Angle: 4-Step Hydro-Formed Optional Polycarbonate Aluminum Lens Reflector NOTE: (Photocell Consult with NOT your included) CE WATTAGE OPTIONS sales representative for lead time. 2 Application option is only available for the Circular 70W, 80W, CE: and 40W, 00W 55W, 70W, 80W, 00W, 20W, 50W, 200W, 250W TYPE SERIES LAMP WATTAGE LENS OPTIONS NOTE: CH=COBRAHEAD Consult with 0=0 your SERIES sales representative T-TUBULAR 040=40W for availability. G=GLASS BLANK=500K 055=55W P=POLYCARBONATE 27=2700K TYPE SERIES LAMP 070=70W WATTAGE LENS 30=3000K 080=80W 40=4000K 00=00W 055 = 55W BLANK 60=6000K = 5000K 20=20W 65=6500K 0 = 0 SERIES T = TUBULAR 50=50W P = POLYCARBONATE 200=200W 50 = 50W Z = CE 250=250W = 250W Example: CH-0-T040-G (Cobrahead, 0 0 Series, Tubular, 40W, Glass Lens, 5000K) Example: CH-0-T250-P-60 (Cobrahead, 0 0 Series, Series, Tubular, Tubular, 250W, 250W, Polycarbonate Lens, Lens, 6000K) 6000K) CH02 Compact Structure, Corrosion Resistant Die Standard Cast Aluminum Powder Coated Alloy Housing Finish: Gray Stainless Corrosion Steel Resistant Screw and Clamp Aluminum Die Cast Aluminum Reflector Alloy Housing Curved Stainless Tempered Steel Screw Glass and Lens Clamp Seal Pole Pole Mounted: Diameter.50-2.36.50"-2.36" Photocell Preinstalled (Optional) Photocell Receptacle Clear Curved Tempered Glass Lens Vacuum Coated Aluminum Reflector 40W, 70W, 80W, 00W Circular Clear Flat Induction Tempered Lamp Glass Available: Lens 40W, High Reflectivity 70W, 80W, Vacuum 00W Coated IP Symmetric RATING Hydroformed Aluminum Reflector Type IP43: V Suitable Distribution for Damp Location CE WATTAGE OPTIONS CE: 40W, 70W, 80W,00W NOTE: Consult with your sales representative for lead time. PROFILE CIRCULAR INDUCTION INDUCTION GENERATOR 2 Application option is only available for the Circular 70W, 80W, and 00W ORDERING OPTIONS CIRCULAR 40W - 00W INDUCTION TYPE SERIES LAMP WATTAGE LENS OPTIONS 40W BULB - INDUCTION 00W CH=COBRAHEAD 02=02 SERIES C-CIRCULAR 040=40W G=GLASS BLANK=500K MOUNTING 85W HEIGHT 070=70W 27=2700K 8 to 5 080=80W 30=3000K = 3000K 02 = 02 SERIES 00=00W 40=4000K 60=6000K Z = CE 65=6500K Example: CH-02-C040-G (Cobrahead, 02 Series, Circular, 40W, Glass Lens, 5000K) Example: Example: CH-02-C040-G CH-02-C00-G-60 (Cobrahead, (Cobrahead, 02 Series, 02 Series, Circular, Circular, 40W, 00W, Glass Glass Lens, Lens, 5000K) 6000K) Example: CH-02-C00-G-60 (Cobrahead, 02 Series, Circular, 00W, Glass Lens, 6000K) Actual performance Actual performance may differ may as differ a result as a of result end-user of end-user environment environment and application. and application. Specifications Specifications subject subject to change to change without without notice. notice. www.fulham.com 323 599 5000 8
CH03 Compact Structure Seal Die Cast Generator Hydro-Formed Aluminum Reflector Tempered Glass Lens Pole Mounted: Diameter.97" 40W, 70W, 80W Bulb Induction Lamp Available: 55W Clear Tempered Glass Lens Type V Distribution 40W - 80W BULB INDUCTION 55W 03 = 03 SERIES B = BULB 055 = 55W Example: CH-03-C040-G (Cobrahead, 03 Series, Circular, 40W, Lamp with Glass Lens) Example: CH-03-C080-G-60 (Cobrahead, 03 Series, Circular, 80W, Glass Lens, 6000K) CH04 The Induction Canopy Series Compact can be Structure used in a variety of commercial Polycarbonate applications Lens including The long life and superior lumen Die Cast maintenance Aluminum Alloy Housing of Induction significantly Symmetric Hydroformed reduces maintenance Aluminum Reflector costs and provides a considerable Seal Die reduction Cast Generator in the total cost of ownership. Type V Distribution Hydro-Formed Aluminum Reflector Polycarbonate Lens APPLICATIONS - CHARACTERISTICS - Low Lumen Depreciation, >70% at 60,000 Hours Pole Mounted: Diameter.97" Parking Structures Standard Kevin Temperature is 5000K: Provides a Cooler Temperature Convenience Stores Wide Range of Color Temperature Options Available: 2720K 6500K Gas Stations Pre-Wired Input Connector Banks 40W, 70W, 80W Pharmacy Drive Thru Canopies COMPLIANCE - Bulb Induction Lamp Available: 55W UL listed UL 598 (E363375) ELECTRICAL - cul listed UL 598 (E363375) FCC Part 8-A Surge Immunity IEC 6000-4-5: Class 4 Ambient Temperature Rating: -20 C to 40 C SEALED Constant DIE CAST Wattage INDUCTION Output GENERATOR With Less Than 3% Variance Output Frequency: 250 khz TYPE SERIES LAMP WATTAGE 40W - Generator 80W Type: Class P Type Outdoor BULB INDUCTION THD %: < 0% B = BULB 055 = 55W 55W Pre-Wired Output Connector LENS 04 = 04 SERIES P = POLYCARBONATE parking structures, convenience stores, gas stations, banks and pharmacy drive-thru canopies. Example: CH-04-C040-P (Cobrahead, 04 Series, Circular, 40W, Lamp with Polycarbonate Lens) Example: CH-04-C080-P-65 (Cobrahead, 04 Series, Circular, 80W, Lamp with Polycarbonate Lens, 6500K) Actual performance may differ as a result of end-user environment and application. Specifications Check subject with sales to change representative without notice. for availability. 9 (323) fulham.com 599-5000 5000
BASIC COLLECTION - COBRAHEAD SERIES CH05 Compact Structure Profile Generator Stainless Steel Screw and Cap Pole Mounted: Diameter.5"-2.36" Clear Curved Tempered Glass Lens Type V Distribution 40W, 70W 40W - 70W TYPE SERIES LAMP WATTAGE CH06 05 = 05 SERIES Example: CH-05-C040-G (Cobrahead, 05 Series, Circular, 40W, Glass Lens, 5000K) Example: CH-05-C070-G-60 (Cobrahead, 05 Series, Circular, 70W, Glass Lens, 6000K) Profile Generator Pole Mounted: Diameter 2.63" Tempered Glass Lens: Up to 90% Light Transmission Rate 70W, 80W, 00W, 20W,50W 70W - 50W 0' to 25' LENS TYPE SERIES 06 = 06 SERIES LAMP WATTAGE T = TUBULAR 50 = 50W LENS Example: CH-06-T070-G (Cobrahead, 06 Series, Tubular, 70W, Glass Lens, 5000K) Example: CH-06-T50-G-60 (Cobrahead, 06 Series, Tubular, 50W, Glass Lens, 6000K) Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice. 323 599 5000 www.fulham.com 0
CH07 Slim Structure Streamlined Contour for High Wind Resistance Sealed Die Cast Generator Generator Directly Mounted to Housing for Reliability and Easy Maintenance Pole Mounted: Diameter.50"-2.36" 70W, 80W, 00W, 20W, 50W, 200W, 250W Clear Flat Tempered Glass Lens CE/CSA WATTAGE OPTIONS CE: 200W, 250W CSA: 00W, 50W, 200W, 250W 70W - 250W 07 = 07 SERIES T = TUBULAR 50 = 50W 250 = 250W J = CSA Z = CE Example: CH-07-T070-G (Cobrahead, 07 Series, Tubular, 70W, Glass Lens, 5000K) Example: CH-07-T250-G-60 (Cobrahead, 07 Series, Tubular, 250W, Glass Lens, 6000K) CH08 Slim Structure Streamlined Contour for High Wind Resistance Sealed Die Cast Generator Generator Directly Mounted to Housing for Reliability and Easy Maintenance Pole Mounted: Diameter.50"-2.36" 20W, 50W, 200W, 250W Clear Curved Polycarbonate Lens CE/CSA WATTAGE OPTIONS CE: 200W, 250W CSA: 50W, 200W, 250W 20W - 250W 08 = 08 SERIES T = TUBULAR 50 = 50W 250 = 250W P = POLYCARBONATE J = CSA Z = CE Example: CH-08-T20-P (Cobrahead, 08 Series, Tubular, 20W, Polycarbonate Lens, 5000K) Example: CH-08-T250-P-60 (Cobrahead, 08 Series, Tubular, 250W, Polycarbonate Lens, 6000K) Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice. (323) 599-5000 5000