CENTRIC BUTTERFLY VALVES RFC page 1 F MAIN APPLICATION : Transport and distribution of: - cold and hot industrial water; - saturated vapours; - petroleum products; - fluids charged with solid particles (consistency max. 3%) on condition that the compatibility regarding the corrosion, erosion and safety in work in relation to the design and materials used to be ensured. DESIGN AND WORKING CHARACTERISTICS : - type: - "W" - Wafer ; - "L" - Lug ; - "F" - Flanged ; - shaft : - one-piece ; - two-pieces ; - connecting flanges : - ISO, BS, DIN, ANSI. - overall length: - ISO, BS, DIN; - flanged body STAS 1933/2. - max. liquid flow speed: - 4 m/s for PN1 ; - 5 m/s for PN 16. WORKING TEMPERATURE : Tmax / Tmin 8 C / -1 C - for NBR type rubber ; 12 C / -1 C - for EPDM type rubber. OPERATION : AM - manual with lever ; AR - manual with gear box ; AE electric operation ; AP pneumatic operation. MOUNTING : - indifferent flow direction ; - indifferent mounting position. FACTORY TESTS; TEST PRESSURES; LEAKAGE: - hydraulic tests in conformity with ISO 528 ; - test pressures : - shell - 1.5 x PN (bar); - seat - 1.1 x PN (bar); - maximum allowable leakage at seat test in conformity with ISO 528, grade A. INQUIRY AND ORDER FORM It is recommended to fill up the technical sheet of agreement.
CENTRIC BUTTERFLY VALVE PN16 IRIS TYPE RF, IRIS 16 page 2 F Wafer (W) Lug (L) DESIGN CHARACTERISTICS: - design : SR ISO 1631; - overall length: ISO 5752, S 2, BS 28 S2; - connecting dimensions: - PN 16, PN1 - ISO 75-2; BS EN 192-2; DIN 251; - cls. 125/15 - ANSI B16.1 / ANSI B16.5. MATERIALS : - body: - cast iron EN GJL 25 SR EN 1561-99 - BS 1452, GG 25 DIN 1691; - ductile iron EN GJS 5-7 SR EN 1563-99 - BS 2789, GGG 5 DIN 1693, on request; - disc: - ductile iron EN GJS 5-7 SR EN 1563-99, GGG 5 DIN 1693 chromium plated on the sealing outline; - on special request: - ductile iron EN GJS 5-7 SR EN 1563-99 - BS 2789, GGG 5 DIN 1693 + rubber; - stainless steel 2MoNiCr175-316 S2 BS 1449 - X2CrNiMo18.12 DIN 1744-316L AISI; - bronze CuAl9T; - shaft: - min. 11.5% Cr stainless steel - 41 S21 BS 156 - X2Cr13 DIN 1744 42 AISI; - sleeve: - rubber: - NBR (Tmax / Tmin)= 8 C / -1 C) - EPDM(Tmax / Tmin) = 12 C / -1 C) SEATS : - disc / sleeve : - ductile iron chromium plated on the outline / rubber; - bronze / rubber; - stainless steel / rubber; - rubber/rubber. (dimensions mm) A B mm inch short neck long neck short neck long neck D H L Connecting flanges (kg) ISO ANSI d3 d4 d5 d6 b h b1 t Wafer short long Lug d1 nxd2 nxm d1 nxd2 nxm neck neck 5 2 172 215 12 145 15 43 125 4x18 4xM16 12.6 2.5 2.7 3.4 65 21/2 18 227 18 155 12 145 139.7 4x2 4x5/8-2.8 3.1 3.9 46 11UNC 8 3 221 264 122 165 14 38 16 152.4 14 9.5 28 3.2 3.5 4.8 1 4 254 294 14 18 158 52 18 19.5 8x2 8x5/8-5 3 9 7 9.5 8x18 8xM16 4.2 4.6 6.9 11UNC 125 5 289 334 15 195 191 21 215.9 16 12.5 6.3 6.8 8.4 15 6 34 346 168 21 215 33 56 24 8x22 8xM2 241.3 8x23 8x3/4-3 22 16 6 3.5 8.4 9 13.2 1UNC 8x22 8xM2 8x23 2 8 383 41 213 24 272 39 6 295 298.4 12x3/4-28 12512 11.5 2 33 8 4 16.5 17.2 21.8 12x22 12xM2* 12x23 1UNC * - for PN 1 For confirmation, please use the technical sheet of agreement (FTC 9 or FTC 23)
Wafer (W) CENTRIC BUTTERFLY VALVE PN1 ISO TYPE A - A B operated with gear box RF ISO/1-1 page 3 F Lug (L) DESIGN CHARACTERISTICS: - design : SR ISO 1631; - overall length: ISO 5752, S 2, BS 28 S2; - connecting dimensions: - PN 1 - ISO 75-2; BS EN 192-2; DIN 251; - cls. 125/15 - ANSI B16.1 / ANSI B16.5. MATERIALS : - body: - cast iron EN GJL 25 SR EN 1561-99 - BS 1452, GG 25 DIN 1691; - ductile iron EN GJS 5-7 SR EN 1563-99 - BS 2789, GGG 5 DIN 1693, on request; - disc: - ductile iron EN GJS 5-7 SR EN 1563-99, GGG 5 DIN 1693 chromium plated on the sealing outline; - on special request: - stainless steel 2MoNiCr175-316 S2 BS 1449 - X2CrNiMo18.12 DIN 1744-316L AISI; - bronze CuAl9T ; - shaft: - min. 11.5% Cr stainless steel - 41 S21 BS 156 - X2Cr13 DIN 1744 42 AISI; - sleeve: - rubber: - NBR (Tmax / Tmin)= 8 C / -1 C) - EPDM (Tmax / Tmin) = 12 C / -1 C) (dimesions mm) Overall dimensions Connecting flanges ISO ANSI mm inch A B C D L L1 dc l d1 nxd3 nxm d1 nxd3 nxm 25 1 472 275 37 68 73 235 89 35 12xM 361.9 12x7/8-15 12x22 12x26 3 12 543 31 358 78 83 282 16 4 2 431.8 9UNC Dimensions of driving shaft H h1 d4 b1 t Connecting dimesions of gear box Flanges ISO5211/1 d 2 d5 d6 d7 Driving Torque (kg) (danm) Wafer Lug Kv* (m³/h) 25 4 35 28 8 4 1 3 19.6 28.7 37 F1 2 12 7 11.5 3 46 4 32 1 5 5 45 29.8 42 58 For confirmation, please use the technical sheet of agreement. (FTC 9 or FTC 23)
CENTRIC BUTTERFLY VALVE PN1 ISO / 1 TYPE RFC,ISO/1-1 page 4 F Lug (L) Disc in open position a-a for 5 6 DESIGN CHARACTERISTICS: - design : SR ISO 1631; - overall length: ISO 5752, S 2, BS 28 S2; - connecting dimensions: - PN 1 - ISO 75-2; BS EN 192-2; DIN 251; - cls. 125/15 - ANSI B16.1 / ANSI B16.5. MATERIALS : - body: - cast iron EN GJL 25 SR EN 1561, GG 25 DIN 1691; - ductile iron EN GJS 5-7 SR EN 1563, GGG 5 DIN 1693 on special request; - disc: - ductile iron EN GJS 5-7 SR EN 1563, GGG 5 DIN 1693 chromium plated on the sealing outline; - shaft: - min. 11.5% Cr stainless steel - 41 S21 BS 156 - X2Cr13 DIN 1744-42 AISI;. - sleeve: - rubber: - NBR (Tmax / Tmin)= 8 C / -1 C) - EPDM (Tmax / Tmin) = 12 C / -1 C) - ESZ / EPDM 7 type (Tmax / Tmin) = 12 C / -1 C) SEATS : - disc / sleeve : - ductile iron chromium plated on the outline / rubber. Overall dimensions Connecting flanges ISO ANSI mm inch A B g d1 L L1 Dp k d1 nxd3 nxm f d1 nxd3 nxm f 35 14" 592 37 18 413 78 82 316 129 46 16x22 16xM2-476.2 12x29 12x1-8UNC - 4 16" 665 35 47 12 16 375 142 515 16x26 16xM24-539.8 16x29 16x1-8UNC - 5 2" 768 4 58 127 131 468 18 62 16x26+ 4xM24 2xM24 3 635 16x33 + 2x11/8-7UNC 38 25 4x11/8-7UNC 6 24" 89 46 69 154 158 556 211 725 16x3+ 4xM27 2xM27 34 749.3 16x36 + 2x11/4-7UNC 41 4x11/4-7UNC Dimensions of driving shaft Connecting dimensions of gear box Driving ~ (kg) Kv* Flange torque H l b h d R d4 d5 Wafer Lug (m³/h) ISO5211/1 (danm) 35 8 56 1 35 F 12 15 125 14 1 57 67 82 5 4 8 63 12 42 F 14 175 14 18 18 9 12 115 5 23 127 142 172 85 7 16 6 55 F 16 21 165 22 6 36 225 248 245 * Kv specific flow rate. For confirmation, please use the technical sheet of agreement (FTC 9 or FTC 23)
CENTRIC BUTTERFLY VALVE PN1 ISO / 1 TYPE AND PN 16 IRIS TYPE, MANUALLY OPERATED RFC ISO/1-1 AM page 5 F Manual operation with lever Manual operation with gear box Operation with lever Operation with gearbox Net Weight Handwheel (kg) Net Weight A B (kg) A B Lever C E Wafer RMS C G M1 N Dr driving Wafer Type short long short long short long Lug type short long short long torque short long Lug neck neck neck neck neck neck neck neck neck neck (danm) neck neck 5 172 215 12 145 3 3.2 3.9 172 215 12 145 4.4 4.6 5.3 LMC/ 65 18 227 18 155 3.3 3.6 4.4 18 227 18 155 4.7 5 5.8 Al 38 58 8 221 264 122 165 3.7 4 5.3 221 264 122 165 5.1 5.4 6.7 265 Q 52 13 4 5 14 1 254 294 14 18 4.7 5.1 7.4 254 294 14 18 6.1 6.5 8.8 135 125 LMC 289 334 15 195 7.3 7.7 9.3 289 334 15 195 8.2 8.7 1.3 15 325 34 346 168 21 33 62 9.4 1 14 34 346 168 21 1.3 1.9 15.1 2 LMC 383 41 213 24 39 75 18.2 18.9 23.5 Q1 383 41 213 24 56 145 5 55 27 19.1 19.8 24.4 43 25 - - - - - - - - - - 472 275 24.1 33.2 Q2A 65 19 65 62 215 8 3 - - - - - - - - - - 543 31 34.3 46.5 35 - - - - - - - - - - RMS3 592 37 1 235 99 9 25 5 72 82 4 - - - - - - - - - - RMS4 665 35 114 279 126 14 4 8.2 111.3 123.3 5 - - - - - - - - - - RMS5 768 4 317 14 5 11.8 164.2 179.2 RMS5 12 16 6 - - - - - - - - - 89 46 45 191 4 11.3 274 297 /C1 For confirmation, please use the technical sheet of agreement (FTC 9 or FTC 23 )
CENTRIC BUTTERFLY VALVE PN1 ISO / 1 TYPE AND PN 16 IRIS TYPE, ELECTRICALLY OPERATED RFC,ISO/1-1 RF IRIS 16 AE page 6 F ELECTRIC ACTUATOR: - standard equipped with NOTOR actuator in the following variants: - normal (N) with electric switch box; - antiex (Ex) with electric switch box; - energetic () without electric switch box. Mechanism Type Notor s characteristics stroke A B nominal output motor Gearbox Notor duration short long short long E H H1 M N1 L1 L2 Dr torque speed power type Type (sec) neck neck neck neck (danm) rot/min (kw) 1 254 294 14 18 125 RMS1 21 289 334 15 195 78 388 59 53 91 15 3 28.18 34 346 168 21 2 N1A/ 383 41 213 24 236 236 18 25 C 27 472 275 RMS2 84 75 75 97 3 28 543 31 45 35 RMS3 8 25.37 33 592 37 1 9 99 124 4 RMS4 36 665 35 114 14 126 133 5 RMS5 N2A/ 54 768 4 14 2 19.75 12 36 496 16 148 325 24 6 RMS5/C1 C 18 89 46 191 Net Weight (kg) Net Weight (kg) Wafer Lug Wafer Lug N O Ex short long short long short long N O Ex N O Ex N O Ex neck neck neck neck neck neck 1 51 51.4 32 32.4 59 59.4 48.2 29.2 56.2 3 9 71 98 76.4 57.4 84.4 125 52 52.3 33 33.3 58 58.3 5 31 56 35 18 89 114 116 97 122 15 53.5 54.1 34.5 35.1 61.5 62.1 51.4 32.4 59.4 4 137 118 143 161.5 142.5 167.5 2 58.1 58.8 39.2 39.9 66.1 66.8 56 37 64 5 25.6 186.6 213 23.6 211.6 238 25 7 51 78 66.2 47.2 74.2 6 336.6 317.6 344 366.6 347.6 374 For confirmation, please use the technical sheet of agreement. (FTC 9 or FTC 15 )
CENTRIC BUTTERFLY VALVE PN1 ISO / 1 TYPE AND PN 16 IRIS TYPE, ELECTRICALLY OPERATED RFC,ISO/1-1 RF IRIS 16 AE page 7 F Direct electric operation with UNIC actuator Wafer (W) Actuator s characteristics A B ~ (kg) Actuator Stroke type Maximum Electric motor duration C H H1 E E1 K K1 x Wafer torque Power (sec) short long short long short long Lug Type (danm) (kw) neck neck neck neck neck neck 5 UNIC.5 4.8 15 172 215 12 145 45 13 75 157.5 82.5 113 62 4.5 4.7 6.4 65 18 227 18 155 4.8 5.1 5.9 8 221 264 122 165 5 7.5 7.8 9.1 1 UNIC1 1.2 254 294 14 18 129 95 27 98 121 67 8.5 8.9 11.2 mono- 55 26 125 phazed 289 334 15 195 1.6 11.1 12.7 15 UNIC2 2.3 3 34 346 168 21 65 17.4 18 22.2 2 383 41 213 24 26.5 27.2 31.8 25 UNIC4 4 14.5 18 256 123 155.5 93 7.9 472 275 29.8 38.7 3 UNIC6 6 543 31 8 17 145 38 181.5 24 135-49.8 62 For confirmation, please use the technical sheet of agreement. (FTC 9 + FTC 15)
CENTRIC BUTTERFLY VALVE PN1 ISO / 1 TYPE AND PN 16 IRIS TYPE, PNEUMATICALLY OPERATED RFC,ISO/1-1 RF IRIS-16 AP page 8 F Pneumatic operation with DPP type mechanism for 5 3 for 35 6 Wafer (W) Mechanism A B ~(kg) type short long short long H K L N F s Wafer Lug neck neck neck neck short neck long neck 5* 172 215 12 145 1.5 1.7 11.4 65* DPP6 18 227 18 155 15 5 153 36 16 1.8 11.1 11.9 8* 221 264 122 165 11.2 11.5 12.8 1* 254 294 14 18 15.2 15.6 17.9 DPP1 12 56 159 48 19 125* 289 334 15 195-17.3 17.8 19.4 15* DPP2 34 346 168 21 25.6 26.2 3.4 15 7 165 45 22 2* 383 41 213 24 33.7 34.4 39 25 DPP5 472 275 48.1 57.2 185 9 169 58 27 3* 543 31 58.3 7.5 35 DPP125 592 37 66 96 78 66 428 114 124 4 DPP25 665 35 685 125 12 685 493 185 197-5 768 4 127 272 287 DPP5 275 143 82 575 6 89 46 154 37 393 *RF-IRIS PN16 For confirmation, please use the technical sheet of agreement. (FTC 9)
CENTRIC BUTTERFLY VALVE PN1 ISO / 1 TYPE AND IRIS TYPE, PNEUMATICALLY OPERATED WITH SINGLE- (RDF) AND DOUBLE-ACTING (RD) ACTUATOR RFC, ISO/1-1 RF IRIS-16 APR page 9 F Wafer (W) supply On special request, may be equipped with: - electric limit position signalizer; - pneumatic or electropneumatic positioner; - solenoid control valve: - 3/2 way for RDF actuator; - 5/2 way for RD actuator. Minimum operation pressure: 4 bar. Max working pressure for 3 = 6 bar. A B short long short long neck neck neck neck 5* 172 215 12 145 C 45 Operation with single-acting actuator Tip E H H1 K K1 G x 25 472 275 RDF- 84.8 85.5 46.2 5 3 543 31 8 16-2 835 283 224 24 19 95 1 RD8 495 218 18 168 154 56.4 61.4 RDF- 5-2 ~(kg) Operation with double-acting actuator ~(kg) 26.7 27.4 29 Wafer short long neck neck Lug Tip E H H1 K K1 G x Wafer short long neck neck 26 96 68 71 65 G1/8 19 5.5 5.9 6.4 RD5 18 96 68 71 65 G1/8 19 5 5.4 5.9 1* 254 294 14 18 55 65* 18 227 18 155 RDF- 9 9.4 1.1 5.5 5.8 6.6 8* 221 264 122 165 5 1-3 34 122 94 9 76 9.7 1.3 11.3 8.7 9.3 1.3 RDF- 2-2 44 138 11 18 94 13.8 14.2 16.5 RD1 26 122 94 9 76 9.3 1 12 2* 383 41 213 24 125* 289 334 15 195 RDF- 23 23.5 25 13.3 13.7 15.3 485 182 144 138 124 RD2 31 138 11 18 94 15* 34 346 168 21 65 4-2 G1/4 24 24.5 25.1 26.6 G1/4 24 14.8 15.1 16.9 RDF- 63 218 18 168 154 44.6 45.3 47 RD4 394 182 144 138 124 7 8-2 Lug For confirmation, please use the technical sheet of agreement. (FTC 9)
CENTRIC BUTTERFLY VALVE PN1 ISO / 1 TYPE AND PN 16 IRIS TYPE, OPERATED WITH FLOAT RFC,ISO/1-1 RF IRIS-16 APL page 1 F Flow direction short neck Overall dimensions ~(kg) A B Wafer short C E G I short long neck long neck long neck neck neck 5* 172 215 12 145 52 26 174 28 14.5 14.7 15.4 65* 18 227 18 155 184 3 15.8 16.1 16.9 8* 221 264 122 165 194 28 19.2 19.5 2.8 54 32 1* 254 294 14 18 29 35 21.2 21.6 23.9 125* 289 234 15 195 224 37 35.3 35.8 37.4 575 4 15* 34 346 168 21 24 39.9 4.5 44.7 39 2* 383 41 213 24 72 48 28 51 51.7 56.3 25 644 125 855 55 325 42 66.6 75.7 3 746 15 99 62 36 48 14.8 117 35 845 175 112 68 35 157 167 65 4 942 2 125 74 45 198 21 5 1132 254 15 85 481 8 282 297 6 131 3 174 95 576 81 45 428 * - RF IRIS PN 16 Lug For confirmation, please use the technical sheet of agreement. (FTC 14)
CENTRIC BUTTERFLY VALVE PN1 RFC-1 page 11 F Flanged (F) Wafer (W) DESIGN CHARACTERISTICS: - connecting flanges: - PN 1 - ISO 75-2; BS EN 192-2; DIN 251. MATERIALS : - body: - cast iron EN GJL 25 SR EN 1561, GG 25 DIN 1691; - ductile iron EN GJS 5-7 SR EN 1563, GGG 5 DIN 1693 on special request; - disc: - cast iron EN GJL 25 SR EN 1561, GG 25 DIN 1691; chromium plated on the sealing outline; - shaft: - min. 11.5% Cr stainless steel - 41 S21 BS 156 - X2Cr13 DIN 1744-42 AISI; - sleeve: - rubber: - NBR type (Tmax/Tmin) : 8 C / -1 C) - EPDM type (Tmax/Tmin) : 12 C / -1 C) - ESZ / EPDM 7 type (Tmax / Tmin) : 12 C / -1 C) SEATS : disc / sleeve : - ductile iron chromium plated on the outline / rubber. L d1 G dc l A B mm inch Wafer Flanged Wafer Flanged Wafer Flanged Wafer Flanged Wafer Flanged 7 28" 1145 54 175 8 895 565 4 659 585 253 166 35 8 32" 1235 585 2 9 115 65 56 754 697 29 215 9 36 1442 7 225-1 - 755-847 - 325-1 4" 154 74 25 35 111 123 78 67 941 99 362 312 12 48" 192 89 275 4 133 1445 888 75 1161 116 452.5 388 Connecting flanges Dimensions of driving shaft a Wafer Flanged x d2 nxd3 + n1xm nxd3 + n1xm Wafer Flanged H h d5 k t 7 7 84 2x3 + 4xM27 16x3 + 8xM27 35 4 68 145 8 2 7.5 8 8 95 2x33 + 4xM3 16x33 + 8xM3 75 4 9-15 24x33 + 4xM3-45 88 16 11 25 9 1 1 116 24x36 + 4xM33 2x36 + 8xM33 45 95 12 123 138 28x39 + 4xM36 24x39 + 8xM36 5 5 17 14 125 32 11 ξ Dimensions of gear box connection Driving torque ~(kg) Head loss ~(danm) c b a1 f M1 x1 Wafer Flanged factor 7 4 711 386.5 65 17 8 13.35 8 44 79 57 763 M2 3 9-189 61 -.36 245 14 1 5 2 121 799 126.35 12 27 65 12 M3 4 151 171 1982.38 For confirmation, please use the technical sheet of agreement. (FTC 9)
CENTRIC BUTTERFLY VALVE PN1 MANUALLY OPERATED WITH GEAR BOX RFC-1-AM page 12 F Gear box type A B K E C Dr N a Wafer Flanged Hanwheel driving torque ~(danm) ~(kg) Wafer Flanged 7 1145 54 4 55 725 BM 1 8 1235 585 115 246 394 5 17 2 56 613 883 9 1442 7-84 - BM 16 1 154 74 125 253 594 63 215-25 67 129 149 12 BMC 3 192 89 156 34 83 936 28 75 4 221 2353 For confirmation, please use the technical sheet of agreement. (FTC 9)
CENTRIC BUTTERFLY VALVE PN1 ELECTRICALLY OPERATED RFC-1 AE page 13 F NOTOR mechanism Intermediate mechanism BMC type ELECTRIC OPERATION: - standard equipping with NOTOR actuator in the following variants: - normal (N) with electric switch box; - antiex (Ex) with electric switch box; - energetic () without electric switch box. Type of actuator Gear box type Notor type Nominal torque (danm) Notor s characteristics Output speed (rot/min) Motor power (kw) Stroke duration ~(sec) A B E K H 7 1145 54 BMC 1 12 36.75 19 8 1235 585 246 115 99 9 1442 7 1 BMC 16 N2A/C 2 24 1.1 326 154 74 253 125 123 12 BMC 3 34 192 89 34 136 1455, ~(kg) a Wafer Flanged Wafer Flanged N Ex N Ex 7 4 675.1 656.1 682.5 839.6 874.6 91 8 56 858.6 839.6 866 151.6 132.6 159 9 - - 962 942.6 969 - - - 1 67 115.6 1131.6 1158 1611.6 1592.6 1619 12 75 2166.6 2147 2174 2438.6 2419.6 2446 For confirmation, please use the technical sheet of agreement. (FTC 9 + FTC 15)
CENTRIC BUTTERFLY VALVE PN1 OPERATED WITH FLOAT RFC-1-APL page 14 F Flow direction Overall dimensions ~(kg) A B C E F l Wafer Flanged 8 1665 4 221 112 141 128 118 12 1 28 5 2665 1281 197 162 162 25 12 2343 6 311 143 2215 1934 1994 395 For confirmation, please use the technical sheet of agreement. (FTC 14)
RESILIENT SEATED CENTRIC BUTTERFLY VALVE PN1 RFCC-1 page 15 F For operation with LMC type actuator E For operation with RMS type actuator DESIGN CHARACTERISTICS: - design SR ISO 1631; - connecting flanges: - PN 1 - ISO 75-2; BS EN 192-2; DIN 251. MATERIALS : - body: - cast iron EN GJL 25 SR EN 1561, GG 25 DIN 1691; - ductile iron EN GJS 5-7 SR EN 1563, GGG 5 DIN 1693, on special request; - disc-shaft: - carbon steel + min. 11.5% Cr stainless steel - 41 S21 BS 156 - X2Cr13 DIN 1744-42 AISI; - sleeve: - rubber: - NBR type (Tmax / Tmin): 8 C / -1 C) - EPDM type (Tmax / Tmin): 12 C / -1 C) - ESZ / EPDM 7 type (Tmax / Tmin): 12 C / -1 C) SEATS : - disc / sleeve : - rubber / rubber. MOUNTING BETWEEN FLANGES : PN 1 ISO-75-1 tip A,B. Overall length Connecting flanges mm inch A B b d1 L L1 dc l d2 nxd3 Driving torque ~(danm) Net weight ~(Kg) ξ Head loss factor 5 2 171 17 17 43 47 34 6 125 2 2.5.45 65 2½ 2 126 127 46 51 54 14 145 4x18 3 3.6.4 8 3 212 127 142 46 51 7 19 16 4 4.1 13 1 4 244 137 16 52 57 9 26 18 5 7.1.3 8x18 125 5 282 16 192 56 61 118 38 21 8 7.8.25 15 6 31 17 218 56 61 147 52 24 13 9.5 8x23 2 8 41 235 273 6 65 197 68 295 21 16.7 25 1 46 26 18.2 328 68 73 248 93 35 12x23 32 21.7 5 65 8 1 125 15 2 25 Dimensions of driving shaft Dimensions of gear box connection H h1 b1 t d4 h2 b2 Flange ISO 5211/1 D d5 d6 d7 14 38 28 9.5 25 5 3 F 7 9 7 55 9.5 16 12.5 33 3 16 3 6 3.5 22 4 35 2 35 8 4 28 F 1 12 12 7 11.5 For confirmation, please use the technical sheet of agreement. (FTC 9)
RESILIENT SEATED BUTTERFLY VALVE PN1 RFCC-1 page 16 F DESIGN CHARACTERISTICS : - design SR ISO 1631; - connecting dimensions: - PN 1 - ISO 75-2; BS EN 192-2; DIN 251. MATERIALS : - body : - cast iron EN GJL 25 SR EN 1561, GG 25 DIN 1691 ; - ductile iron EN GJS 5-7 SR EN 1563, GGG 5 DIN 1693 - on special request; - disc+shaft : carbon steel+min. 11.5%Cr stainless steel - 41 S21 BS 156 - X2Cr13 DIN 1744-42 AISI; - sleeve: - rubber: - NBR type (Tmax / Tmin): 8 C / -1 C) - EPDM type (Tmax / Tmin): 12 C / -1 C) - ESZ / EPDM 7 type (Tmax / Tmin): 12 C / -1 C) SEATS : disc / sleeve - rubber / rubber. MOUNTING BETWEEN FLANGES : PN 1 ISO-75-1 type A,B Connecting Overall dimensions dimensions mm. inch. A B b d1 L L1 dc l d2 n x d3 Driving torque ~(danm) Dimensions of driving shaft Connecting dimensions of gear box H l1 b1 h d4 Flange ISO 5211/1 D d5 d7 3 46 4 8 32 F12 15 125 14 35 56 1 5 35 8 4 63 12 42 F14 175 14 18 5 85 7 16 6 55 F16 21 165 22 Net ξ weight Head loss ~(kg) factor 3 12" 515 28 15 372 78 82 292 114 4 16x22 5 32.2 35 14" 596 31 18 434 78 82 338 13 46 16x26 1 48 4 16" 677 345 489 12 16 391 151 515 2x26 145 69.17 25 5 2" 815 41 594 127 131 488 189 62 2x3 2 1.15 For confirmation, please use the technical sheet of agreement. (FTC 9)
RESILIENT SEATED CENTRIC BUTTERFLY VALVE PN1 MANUALLY OPERATED RFCC-1 AM page 17 F Manual operation with lever Manual operation with gear box Lever type Operation with lever A B C E M Net weight ~(Kg) Gear box type Operation with gear box Handwheel Net driving A B C G M1 N Dr weight torque ~(Kg) (danm) 5 171 17 3 171 17 4.6 65 LMC/Al 2 126 4.1 2 126 5.7 38 58 265 8 265 212 127 4.5 212 127 6.2 Q 5 13 4 5 135 14 1 244 137 7.5 244 137 9.2 125 282 16 8.8 282 16 1 15 LMC 325 31 17 33 62 325 1.5 31 17 11.6 2 LMC 43 41 235 4 43 18.5 Q 1 41 235 56 19 5 55 27 19.7 25 23.5 46 26 215 26.5 Q 3 2 A 65 19 65 62 8 515 28 37 35 RMS 3 596 31 1 235 99 9 25 5 63.5 4 RMS 4 677 345 114 273 126 14 4 8.2 91 5 RMS 5 815 41 12 317 14 16 5 11.8 138 For confirmation, please use the technical sheet of agreement. (FTC 9)
RESILIENT SEATED BUTTERFLY VALVE PN 1, ELECTRICALLY OPERATED RFCC-1-AE page 18 F Direct electric operation with UNIC type actuator mm inch A B C 5 2" 227 17 65 2 1/2" 256 126 45 8 3" 268 127 5 1 4" 3 137 125 5" 338 16 55 15 6" 366 17 65 2 8" 48 235 7 25 1" 53 26 8 Actuator characteristics Stroke Net Actuator Maximum Electric motor duration H H1 E E1 K K1 x weight type torque Power Type (sec.) ~ (kg) (danm) (kw) 5.8 4.5 UNIC.5 4 15 13 75 157.5 82.5 113 62 65.8 5.6 8.2 8.6 1 UNIC 1 1.2 mono- 129 95 27 98 121 67 26 11.6 125.2 phased 12.3 3 15 UNIC 2 2.3 18.5 14.5 18 256 123 155.5 93 2 UNIC 4 4.9 26.2 25 UNIC 6 6.9 17 145 38 181.5 24 135-41.7 For confirmation, please use the technical sheet of agreement. (FTC 9 + FTC 15)
RESILIENT SEATED BUTTERFLY VALVE PN 1 ELECTRICALLY OPERATED RFCC-1-AE page 19F L2 ELECTRIC ACTUATOR: - standard equipped with NOTOR actuator in the following variants: - normal (N) with electric switch box; - antiex (Ex) with electric switch box; - energetic () without electric switch box. Actuator type Gear box type Notor type Notor s characteristics Nominal Output Motor torque speed power (danm) (rot/min) (kw) Stroke duration ~(sec) A B L E M N1 d1 3 3 515 28 75 1 372 RMS 3 N1 A/C 8 25.37 35 33 596 31 9 118 82 434 4 RMS 4 2 19.75 32 677 345 1 144 13 125 489 N2 A/C 5 RMS 5 12 36.75 23 815 41 125 147 125 16 594 H H1 Dr ~(Kg) N Ex 3 89 7 95 35 236 45 18 15 86 111 4 139 12 145 5 36 496 24 213.6 194.6 221 For confirmation, please use the technical sheet of agreement. (FTC 9 + FTC 15)
RESILIENT SEATED BUTTERFLY VALVE PN1, PNEUMATICALLY OPERATED RFCC-1-AP page 2 F Pneumatic operation with DPP type for 5 3 for 35 5 Minimum pressure of driving agent: 4 bar. Actuator type A B H K L N F s ~(Kg) 5 171 17 1.7 65 DPP6 2 126 15 5 153 36 16 11.8 8 212 127 12.3 1 244 137 18.3 DPP1 12 56 159 48-19 125 282 16 19 15 31 17 15 7 165 45 22 27 DPP2 27 41 235 45.2 185 9 169 58 27 25 46 26 5.6 DPP5 3 515 28 428 95 66 96 78 66 35 DPP125 596 31 15-4 DPP25 677 345 685 125 12 685 493 164 5 DPP5 815 41 275 143 127 82 575 245 For confirmation, please use the technical sheet of agreement. (FTC 9)