High Productivity Vertical Machining Center

High Productivity Vertical Machining Center

VC 430 / VC 510 is designed for high-speed and superior precision machining in a production environment. VC430/ VC510's powerful drives, heavy cutting, column-moving, and unsurpassed rigidity provide exceptional precision and high productivity. Belt driven 00 r/min 6000 r/min* * : VC 510 only std. opt. Swiveling operator's panel Pallet Large pallet dimensions head cooling system std. Large capacity coolant tank with chip pan and box filter Improved screen filter 02

High Productivity Vertical Machining Center Direct-couple driven 12000 r/min Dual contact spindle (BBT40) Work light for set-up std. Roller type LMG Improved rapid traverse with roller type LMG. CAM type ATC ISO #40, 7/24 TAPER ATC time : 1.3s (T-T-T) - 30 Tools - 40 Tools opt. VC 430 model 03

High Speed High speed spindle of high quality and rigidity increases the machine's efficiency and performance. Head The spindle is mounted directly to the Fanuc spindle motor for faster acceleration and deceleration, and to reduce vibration during high speed operation. The powerful 18.5kW (24.8Hp) spindle motor drives the 40 taper tools at speeds up to 00 r/min. Belt Driven 00 r/min 6000 r/min* * : VC 510 only opt. std. Direct-Coupled Driven 12000 r/min opt. Head Cooling System std. The refrigerated spindle cooling system circulates cooling oil to maintain a constant temperature for high accuracy, regardless of the ambient temperature or cutting conditions. Note) Provided as an standard feature in case of 00 & 12000 r/min. Dual Contact (Big plus) std. The dual contact system offers simultaneous dual contact between the machine spindle face and tool holder flange face. Taper contact Flange contact Power-Torque Diagram 117.7 (86.9) Torque : N m(ft lb) 95.5 (70.5) Belt-Driven 00 r/min : 15/18.5 kw (20.1/24.8 Hp) std. 18.5 kw (24.8 Hp) : 30min, S3 60% 15 kw (20.1 Hp) : Cont. (30min, S3 60%) (Cont.) Power : kw(hp) 0 1500 6000 00 speed (r/min) 11 (14.8) 7.5 (10.1) 29.4 N m (21.7 ft lb) 17.5 N m (12.9 ft lb) 23.5 N m 11.9 N m (17.3 ft lb) (8.8 ft lb) Direct-Coupled Driven 12000 r/min : 15/18.5 kw (20.1/24.8 Hp) 167.6 (123.7) 117.6 (86.8) 95.5 (70.5) 90.7 (66.9) 57.2 (42.2) 35.3 (26.1) 28.6 (21.1) 17.6 (13.0) 14.3 (10.6) 12 (8.9) 8.7 (6.4) Torque : N m(ft lb) 1050 1500 2500 4000 5000 00 12000 speed (r/min) opt. Power : kw(hp) 15 Min. 30 Min. Continuous LOW HIGH 18.5 (24.8) 15 (20.1) 11 (14.8) 7.5 (10.1) 6000 r/min* : 11/15 kw (14.8/20.1 Hp) opt. Torque : N m(ft lb) 191.1 (141.0) 140.0 (103.3) 30 Minutes Continuous Power : kw(hp) 15 (20.1) 11 (14.8) 23.9 (17.6) 17.5 (12.9) 0 750 6000 speed (r/min) * : VC 510 only 04

Minimized Non Cutting Time Suitable for high productivity. Tool Magazine The 30 station, automatic tool changer accepts 40 taper tooling. Its reliable double arm system provides a 1.3 second tool-to-tool times. ATC has a bi-directional magazine that automatically takes the shortest path. 30 station 40 station std. opt. Automatic Tool Changer Sophisticated mechanisms that significantly reduce non-cutting time. Tool-to-tool: 1.3 s, Chip-to-chip: 4.3 s Tool change time (T-T-T) Tool change time (C-T-C) 1.3 s 4.3 s Dual Indexing Pallet (APC) The automatic 180 degree indexing pallet table is an integral part of the VC 430 / VC 510. The table mechanism is mounted directly to the bed of the machine on a horizontal plane to enhance the table rigidity. Because the table is stationary during machining, the non-cutting side of the indexing table can be set-up while the workpiece is being machined on the machine side. As an added feature, rotary table cables and work holding hoses can be run down from the sheet metal wall. Model VC 430 VC 510 Pallet change time 5 s 5.5 s Pallet loading capacity Pallet size 2-300 kg (2-661.4 lb) 2-712 475 mm (2-28.0 18.7 inch) 2-350 kg (2-771.6 lb) 2-860 570 mm (2-33.9 22.4 inch) 05

High Rigidity Stable bed and column assemblies are designed for high speed and heavy duty machining. Rigid Body The one piece bed is a rigid, heavily ribbed, Meehanite casting that remains stable under the heaviest cutting conditions. Fine grained Meehanite cast iron is used for its excellent vibration absorbing characteristics. The VC 430 / VC 510 features a superior traveling column design. The table, and therefore the workpieces, remains stationary during machining. This design provides a uniform load to the guideways, ball screws and motors. Travel Axes (X/Y/Z) VC 430 560 / 430 / 570 mm (22.0 / 16.7 / 22.4 inch) VC 510 762 / 516 / 570 mm (30.0 / 20.3 / 22.4 inch) Rapid Traverse Linear motion guideways and high speed servo motors apply high rapid axis movement. This reduces non-cutting time and machining time for greater productivity. Model unit VC 430 VC 510 X-axis m/min (ipm) 40 (1574.8) 40 (1574.8) Y-axis m/min (ipm) 40 (1574.8) 40 (1574.8) Z-axis m/min (ipm) 36 (1417.3) 32 (1259.8) Interface for Additional Equipment Connection Example of Additional Axis Interface An additional hydraulic unit may be required according to rotary table specifications. Recommended rotary table size Connection Example of Fixture Interface Hydraulic VC 430 Ø170 mm (6.7 inch) VC 510 Ø200 mm (7.9 inch) Pneumauic Fixture check list (for hydraulic / pneumatic fixtures) Pressure source Hydraulic P/T A/B Pneumatic P/T A/B Number of ports 1pair (2-PT 3/8" port) 2pair (4-PT 3/8" port) 3pair (6-PT 3/8" port) 4pair (8-PT 1/4" port) Hydraulic power unit Supply scope : User Doosan (Please check the below detail specification, if you want Doosan to supply.) Use Doosan standard unit 24 L/min (6.3 gal/min) / 50 bar Special requirement L/min (gal/min) at MPa (psi) Contact Doosan for more information 06

Advanced Performance & Units Coolant System The large capacity coolant tank is located on rollers. The coolant tank is isolated from the machine bed to prevent heat transfer and associated thermal distortion. Providing high volume flood coolant as a standard feature. Through Coolant opt. The large-scale cutting oil pump and tank are located away from the machine's main body to prevent heat transfer. The pump generates 60 HZ power when measured at the pump outlet. The main axis cutting oil device (T-S-C) is available as an option. Flood Coolant std. Coolant Chiller opt. The coolant chiller lowers coolant temperature, helping to cool both the workpiece and tool during the machining operation. When using insoluble cutting oils, a coolant chiller is recommended to cool heated oil and preserve machining precision. Coolant chiller Coolant tank Lubrication A lubrication system provides automatic lubrication to all guideways and ball screws. The way oil is delivered by piston distributors which precisely meter the volume. A low level alarm prevents the machine from restarting. Rigid Tapping A standard rigid tapping function allows synchronized, high-speed tapping with a standard collet chuck. This eliminates the need for special tap holders. The tapping depth can be accurately controlled. Operating Panel 1. Swivelling operating console An easy-to-use operation panel which can swivel from 0-90 2. The ATC operating button is accessible from the main panel. This can give much easier Magazine : CW operation and maintenance Magazine : CCW for ATC. 3. Portable MPG Portable MPG makes a workpiece setting easier for the operator. 07

Machining Capacity 2 mm Provides high productivity and high accuracy in a variety of machining 3 mm (0.08 in.) operations (0.12 in.) 64 15 mm mm (2.52 (0.59 in.) in.) Face mill Carbon steel (SM45C) 2 mm ø80mm (3.15 in.) Face mill (6Z) (0.08 in.) Face mill ø80mm (3.15 in.) Face mill (6Z) Gray casting (GC25) Face mill 15 mm (0.59 in.) ø80mm (3.15 in.) Face mill (6Z) Aluminum (AL6061) 2 mm (0.08 in.) 3 mm (0.12 in.) 5 mm (0.2 in.) Ø51 mm (2 in.) 2 mm (0.08 in.) Machining rate speed 432 cm 3 /min (26.4 in 3 /min) 1500 r/min 3 mm (0.12 in.) 2700 mm/min (106.3 ipm) Machining rate speed 15 mm (2.52(0.59 in.) in.) 691 cm 3 /min (42.2 in 3 /min) 1500 r/min 3600 mm/min (141.7 ipm) Machining rate speed 1785 cm 3 /min (109 in 3 /min) 1500 r/min Ø51 mm (2 in.) 5580 mm/min (219.7 ipm) End mill Carbon steel (SM45C) U-drill Carbon steel (SM45C) Tap Carbon steel (SM45C) ø30mm (1.2 in.) Endmill (6Z) 5 mm (0.2 in.) 3 mm (0.12 in.) 15 mm (2.52 (0.59 in.) in.) 5 mm (0.2 in.) Ø51 mm (2 in.) Machining rate 36 cm 3 /min (2.2 in 3 /min) Machining rate 172 cm 3 /min (10.5 in 3 /min) Tool M30 x P3.5 speed 222 r/min speed 750 r/min speed 212 r/min 80 mm/min (3.1 ipm) 84 mm/min (3.3 ipm) 742 mm/min (29.2 ipm) 5 mm (0.2 in.) Ø51 mm Machining Accuracy (2 in.) For 64 increased mm repeatability and reliability Designed for exceptionally high accuracy and minimal thermal displacement and vibration. Roundness 6.0 μm Model : VC 430 / VC 510 Material : A7075F Tool : Endmill ø12mm (ø0.5 in.) (4 blades) Roughness Ra 0.2 μm speed : 00 r/min : 1500 mm/min (59.1 ipm) Machining results may differ from those shown here, reflecting differences in environmental and machining conditions. 08

External Dimensions VC 430 Unit : mm (inch) Top View Front View Side View 530 (20.9) 460 (18.1) OIL COOLER (WITH TOP COVER) 2890 (113.8) 107 (4.2) 1085 (42.7) 1805 (42.7) 365 (14.4) 720 (28.3) R400 (15.7) R760 (29.9) 337 (13.3) 1312 (51.7) 3110 (122.4)(WITH TOP COVER) 3030 (119.2)(DIRECT DRIVE TYPE) 2738 (107.8) (BELT DRIVE TYPE) 2150 (84.6) 588 (23.1) 560 (22.0) X STROKE 690 (27.2) DOOR OPEN 710 (28.0) 1422 (56.0) 1125 (44.3) 570 (22.4) Z-stroke 150 (5.9) 430 (16.9) Y-stroke 610 (24.0) Door open 910 (35.8) 208 (8.2) [40 tool] 2150 (84.6) 425 2575 (101.4) [30 tool] (16.7) 2783 (109.6) [40 tool] 68 (2.7) 1015 (40.0) 1185 (46.7) 91 (3.6) 2200 (86.6) 1046 (41.2) 91 (3.6) 2200 (86.6) 2391 (94.1) 946 (37.2) 450 (17.7) 1565 (61.6) 875 (34.4) VC 510 Top View Front View Side View 440 (17.3) 150 (5.9) 390 (15.4) Oil cooler TOP COVER(OPTION) 420 (16.5) 1392 (54.8) 768 (30.2) 3260 (128.3) 2002 (78.8) 415 (16.3) 1258 (49.5) 843 (33.2) R400 (15.7) R760 (29.9) 338 (13.3) 1312 (51.7) 3250 (127.9) (WITH TOP COVER) 3130 (123.2) (DIRECT DRIVE TYPE) 2830 (111.4) (BELT DRIVE TYPE) 560 (22.0) 2270 (89.4) 762 (30.0) X Stroke 1095 (43.1) Door open 980 (38.5) 700 (27.6) 2903 (114.3) [40 tool] 2695 (106.1) [30 tool] 425 (16.7) 2270 (89.4) 2939 (115.7) 940 (37.0) 146 (5.7) 1285 (50.6) 2580 (101.6) 1295 (51.0) 1 (43.3) 91 (3.6) 2580 (101.6) 1 (43.3) Table VC 430 VC 510 Tool Shank BT40 16.6 TAPER GAGE LINE 56 (2.2) 25 (1.0) 165 (6.5) 365 ±0.05 (14.4 ±0.002) 165 (6.5) 365 ±0.05 (14.4 ±0.002) 25 (1.0) 570 (22.4) 412 (16.2) 1340 (52.8) 412 (16.2) 570 (22.4) 30 (1.2) ø63 ø53 10 7/24 TAPER M16 x P2.0 ø44.45 ø17 22.6 22.6 16.1 56 (2.2) 58-M16 TAP ø1200 (47.2) 712 (28.0) 2-ø42(1.7)F7 84-M16x2 TAP 1180 (46.5) 2-ø30 F7 58 (2.3) 212 (8.3) ø1400 (55.1) 212 58 (8.3) (2.3) 30 (1.2) 860 (33.9) 60 L 2 65.4 ø23 ø7 HOLE M16 x P2.0 ø14 15 23 2 4 25 29 ø17 30 ø19 (DIN shape) Pull Stud installation required with 15 degrees as the standard 09

Machine Specifications Travels Table Automatic tool changer Automatic pallet changer Motor Power source Tank capacity Machine Dimensions Features Unit VC 430 VC 510 X-axis (longitudinal movement of table) mm (inch) 560 (22.0) 762 (30.0) Y-axis (cross movement of saddle) mm (inch) 430 (16.9) 516 (20.3) Z-axis (vertical movement of spindle head) mm (inch) 570 (22.4) Distance from spindle nose to table top mm (inch) 150~720 (5.9 ~ 28.3) 210 ~ 780 (8.3 ~ 30.7) Distance from spindle center to column guideway mm (inch) 495 (19.5) 530 (20.9) Rapid traverse rate (X / Y / Z) m/min (ipm) 40 / 40 / 36 (1574.8 / 1574.8 / 1417.3) 40 / 40 / 32 (1574.8 / 1574.8 / 1259.8) Cutting feedrate mm/min (ipm) 18000 (708.7) 16000 (629.9) Pallet size mm (inch) 2-712 x 475 (2-28.0 x 18.7) 2-860 x 570 (2-33.9 x 22.4) Pallet loading capacity kg (Ib) 2-300 (2-661.4) 2-350 (2-771.6) Max. workpiece height mm (inch) 460 (18.1)* 520 (20.5) Pallet surface - 2-29-M16 x P2.0 42-M16 x P2.0 Taper Max. spindle speed r/min 00 {12000} 00 {6000, 12000} taper - ISO #40 7/24 Taper Max. spindle torque N. m (ft. lb) 117.7 {167.6} (86.9 {123.7}) 117.7 {191.1, 167.6} (86.9 {141.0, 123.7}) Type of tool shank - MAS403 BT40 Tool storage capacity ea 30 {40} Max. tool diameter mm (inch) 80 {76} (3.2 {3.0}) Max. tool diameter without adjacent tools mm (inch) 125 (4.9) Max. tool length mm (inch) 220 (8.7)** / 300 (11.8)*** Max. tool weight kg (Ib) 8 (17.6) Tool change time (tool-to-tool) s 1.3 Tool change time (chip-to-chip) s 4.3 Number of pallet ea 2 Pallet change time s 5 5.5 motor (30min.) kw (Hp) 18.5 (24.8) {00, 12000 r/min} 15 (20.1) {6000 r/min} Feed motor (X / Y / Z) kw (Hp) 4.0 / 4.0 / 4.0 (5.4 / 5.4 / 5.4) Electric power supply (rated capacity) kva 40.3 {00, 12000 r/min} 35.1 {6000 r/min} Compressed air supply MPa 0.54 Coolant tank capacity L (galon) 300 (79.3) 420 (111.0) Lubrication tank capacity (available) L (galon) 2 (0.53) Machine dimension (L x W x H) mm (inch) 2960 x 2370 x 3110 (116.5 x 93.3 x 122.4) 3260 x 2580 x 3250 (128.3 x 101.6 x 127.9) Machine weight kg (Ib) 7800 (17196) 9200 (20282.2) * : For large scale structure installation and tool interference, please consult with the technical department of Doosan ** : Avaliable in pallet changer, *** : Avaliable in tool magazine, Note : { } are optional. Standard Feature Optional Feature APC guard for safety Installation parts 4th axis preparation Oil skimmer ATC guard for safety Assembly & operation tools Coolant tank & chip pan Door interlock Full enclosure splash guard Signal tower (red, yellow, green) head cooling system Rigid tapping Work light Automatic front door Automatic power off Automatic tool measurement Automatic workpiece measurement Chip conveyor & chip bucket Pneumatic line for work fixture system Rotary table Shower coolant Test bar Through spindle coolant Hydraulic line for work fixture system The specifications and information above-mentioned may be changed without prior notice. For more details, please contact Doosan. 10

NC Unit Specifications DOOSAN Fanuc i series AXES CONTROL - Controlled axes 3 (X, Y, Z) - Simultaneous controlled axes Positioning (G00) / Linear interpolation (G01) : 3 axes Circular interpolation (G02, G03) : 2 axes - Backlash compensation - Follow up - Least command increment 0.001mm (0.0001 inch) - Least input increment 0.001mm (0.0001 inch) - Machine lock all axes / Z axis - Mirror image Reverse axis movement (setting screen and M-function) - Stored pitch error compensation Pitch error offset compensation for each axis - Stored stroke check 1 Overtravel controlled by software - Absolute pulse coder - Position switch INTERPOLATION & FEED FUNCTION - 2nd reference point return G30 - Circular interpolation G02, G03 - Cylinderical interpolation G07.1 - Dwell G04 - Exact stop check G09, G61 (mode) - Feed per minute - override (10% increments) 0-200 % - Helical interpolation - Jog override (10% increments) 0-200 % - Linear interpolation G01 - Manual handle feed 1 unit - Manual handle feedrate 0.1 / 0.01 / 0.001 mm - Override cancel M48 / M49 - Positioning G00 - Rapid traverse override F0 (fine feed), 25 / 50 / % - Reference point return G27, G28, G29 - Skip function G31 SPINDLE & M-CODE FUNCTION - M- code function M 3 digits - orientation - serial output - speed command S5 digits - speed override (10% increments) 10-150 % TOOL FUNCTION - Tool nose radius compensation G40, G41, G42 - Number of tool offsets 400 ea - Tool length compensation G43, G44, G49 - Tool life management - Tool number command T2 digits - Tool offset memory C Geometry / Wear and Length / Radius offset memory - Tool position offset G45 - G48 PROGRAMMING & EDITING FUNCTION - Absolute / Incremental programming G90/G91 - Automatic Coordinate system setting - Background editing - Canned cycle G73, G74, G76, G80 - G89, G99 - Circular interpolation by radius programming - Custom macro B - Addition of custom macro common variables # - #199, #500 - #999 - Decimal point input - Extended part program editing - Reader / puncher interface RS - 232C - Inch / metric conversion G20 / G21 - Label skip - Local / Machine coordinate system G52 / G53 - Maximum commandable value ±99,999.999 mm (±9,999.9999 inch) - No. of Registered programs 400 ea - Optional block skip - Optional stop M01 - Part program storage 1280m [512 kb] - Palyback - Program number O4-digits - Program protect - Program stop / end M00 / M02,M30 - Rigid tapping G84, G74 - Sub program Up to 4 nesting - Tape code ISO / EIA Automatic discrimination - Thread cutting - Work coordinate system G54 - G59 OTHERS FUNCTIONS (Operation, Setting & Display, etc) - 3rd / 4th reference return - Additional work coordinate system G54.1 P1-48 (48 pairs) - AICC1 (AI Contour Control 1) with Hardware : 40 block preview - Alarm display - Alarm history display - Automatic corner override G62 - Clock function - Coordinate rotation G68, G69 - Cycle start / Feed hold - Display of PMC alarm message Message display when PMC alarm occurred - Machine condition selection function - Embeded ethernet - Dry run - Graphic display Tool path drawing - Help function - High speed skip function (only NC function) - Loadmeter display - Look ahead control G08 - MDI / DISPLAY unit 8.4" Color TFT LCD, keyboard for data input (small), soft-keys - Memory card interface - Operation functions Tape / Memory / MDI / Manual - Operation history display - Optional angle chamfering / corner R - Polar coordinate command G15 / G16 - Programmable data input Tool offset and work offset are entered by G10, G11 - Programmable mirror image G50.1 / G51.1 - Run hour and part number display - Scaling G50, G51 - Search function Sequence NO. / Program NO. - Self - diagnostic function - Servo setting screen - Single block - Single direction positioning G60 - Stored stroke check 2 OPTIONAL SPECIFICATIONS - Additional controlled axes 4 axes in total - AICC II (AI Contour Control II) with Hardware : 200 block preview - Fast Data server - Fast Ethernet 11

http://www.doosaninfracore.com/machinetools/ Head Office Doosan Tower 20th FL., 18-12, Euljiro-6Ga, Jung-Gu, Seoul, Korea -730 Tel : ++82-2-3398-8693 / 8671 / 8680 Fax : ++82-2-3398-8699 Doosan Infracore America Corp. 19A Chapin Rd. Pine Brook, NJ 07058, U.S.A. Tel : ++1-973-618-2500 Fax : ++1-973-618-2501 Doosan Infracore Germany GmbH Emdener Strasse 24 D-41540 Dormagen Germany Tel : ++49-2133-5067- Fax : ++49-2133-5067-001 Doosan Infracore Yantai Co., LTD 13 Building, 140 Tianlin Road, Xuhui District, Shanghai, China (200233) Tel : ++86-21-6440-3384 (808, 805) Fax : ++86-21-6440-3389 EN 140829SU - The specifications and information above-mentioned may be changed without prior notice. - For more details, please contact Doosan.