Refrigeration Oils Mineral based refrigeratin oils Semi-Synthetic refrigeration oils Semi Synthetic Refrigeration Oils Pal Synth Ref
REFRIGERATION COMPRESSOR OILS MINERAL OIL BASED PAL FRIZ 12, 22, 32, 46, 68,100 These oils are formulated from selected lube base stocks to provide low pour point, low floe point, good solubility in liquefied refrigerants & good chemical stability. They possess high fluidity at very low temperatures, resist deposit formation & have reduced tendency to foam. These oils ensure higher condenser efficiency and reduced compressor valve maintenance due to less deposits. These oils also imparts antiwear & rust protection properties. PAL FRIZ grades are recommended for a wide range of refrigeration compressor, both reciprocating as well as rotary using conventional refrigerants except sulphur dioxide. These grades are also recommended for the lubrication of hermetically sealed refrigeration compressors. Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water. Environment: Lubricant should not be disposed in drain, soil and water. To be disposed through licensed/authorized collector of lubricants only. 210 Ltr., 50 Ltr., 20 Ltr. Sr.No Properties PAL FRIZ 12 22 32 46 68 100 1. Appearance Clear, brown liquid 2. Kin. Viscosity, cst at 12-14 20-24 30-34 42-46 62-68 90-106 3. Flash Point, C, Min. 140 145 160 160 170 200 4. Pour Point, C, Max. -39-36 -33-30 -27-27 5. TAN, mg KOH/g of oil, Max. 0.05 0.05 0.05 0.05 0.05 0.05
PALSYNTH REF-32,46,68 These are premium quality of semi-synthetic refrigeration oils which are blended with appropriate chemistry of antioxidants, antiwear & E.P. agents so as to impart desired lubrication & cooling properties. Better viscosity / temperature characteristics of products results in improved hydrodynamic lubrication of compressor bearings. PRODUCT FEATURES Low pour point. Very low Freon flock point. High dielectric strength. Compatibility with CFC refrigerants. High chemical stability in the presence of refrigerants. All types of reciprocating, rotary compressors using conventional refrigerants except sulphur dioxide. Hermetically sealed refrigeration compressors. Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water. Environment: Lubricant should not be disposed in drain, soil and water. To be disposed through licensed/authorized collector of lubricants only. 210 Ltr.,50 Ltr. Sr.No. Properties PALSYNTH REF 32 46 68 1. Appearance Clear & bright Clear & bright Clear & bright 2. Kin. Viscosity, cst at 30-35 42-48 60-70 3. Pour Point, C Max. -42-39 -36 4. Flash Point, C, Min. 150 160 160 5. Freon Floc Point, C Max -48-48 -45 6. Dielectric strength, kv 35 35 30
PALSYNTH REF-32,46,68 These are premium quality of semi-synthetic refrigeration oils which are blended with appropriate chemistry of antioxidants, antiwear & E.P. agents so as to impart desired lubrication & cooling properties. Better viscosity / temperature characteristics of products results in improved hydrodynamic lubrication of compressor bearings. PRODUCT FEATURES Low pour point. Very low Freon flock point. High dielectric strength. Compatibility with CFC refrigerants. High chemical stability in the presence of refrigerants. All types of reciprocating, rotary compressors using conventional refrigerants except sulphur dioxide. Hermetically sealed refrigeration compressors. Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water. Environment: Lubricant should not be disposed in drain, soil and water. To be disposed through licensed/authorized collector of lubricants only. 210 Ltr.,50 Ltr. Sr.No. Properties PALSYNTH REF 32 46 68 1. Appearance Clear & bright Clear & bright Clear & bright 2. Kin. Viscosity, cst at 30-35 42-48 60-70 3. Pour Point, C Max. -42-39 -36 4. Flash Point, C, Min. 150 160 160 5. Freon Floc Point, C Max -48-48 -45 6. Dielectric strength, kv 35 35 30