Business Manufacturing Co. - PDF Free Download

Business Manufacturing Co. Manufacturers of Equipment for the Electrical and Telecommunications Industries 2017 rev. 04/24/2017

This page intentionally left blank.

Table of Contents Cable Pullers Tensiometers H6000.. 4 HTNS10KEP-D.. 16 H10,000.. 5 HTNS20KEP-D.. 17 H1,000. 6 H400CF 7 Cable Tray Rollers Clamp-On Rollers.. 18 Cable Reel Handling Cross-Tray Rollers. 19 Reel Stands Universal Rollers 20 HCRS05K. 8 HCRS10K. 9 Sheaves and Blocks HCRS15K. 10 Duct Rollers.. 21-22 Radius Duct Rollers. 23 Reel Rollers Quadrant Blocks 24 HCRR15K. 11 Hook Blocks.. 25 HCRR30K. 12 Hook Sheaves.. 26 HCRR45K. 13 Rim Rollers. 27 HCRR60K. 14 HCRR90K. 15 Standard Sheaves 28-29 3

Cable Pullers H6000-DLX HIS Cable Puller H6000 is designed for electrical contractors and electrical utilities. The HIS H6000 is portable and efficient and can be easily transported, set-up, and operated by one person. Two-Speed Drive Motor with Built-In Amp Tension Meter and Momentary Footswitch Pulling Capacity: High Speed: 2,500 lbs. Low Speed: 6,000 lbs. Features: Two-Section High-Stress Frame and Optional Mid- Arm Extension Slip-Type Capstan or Optional Self-Tailing Capstan Optional Lightweight Control Box H6000-DLX with all options Schedule #40 and Optional Schedule #80 Adapters and Tool Box Optional All-Terrain Wheels 4

Cable Pullers H10,000-HD HIS Cable Puller H10,000 is designed for electrical contractors and electrical utilities. The HIS H10,000 is portable and efficient and can be easily transported, set-up, and operated by one person. Two-Speed Drive Motor with Built-In Amp Tension Meter and Momentary Footswitch Pulling Capacity: High Speed: 4,500 lbs. Low Speed: 10,000 lbs. Features: Heavy-Duty Three-Section Extended Reach Frame Convertible to Two-Section Slip-Type Capstan or Optional Self-Tailing Capstan Optional Lightweight Control Box Schedule #40 and Optional Schedule #80 Adapters and Tool Box 5

Cable Pullers H1,000 HIS Cable Puller H1000 is a self-contained, portable unit with a 30 dia. bullwheel. Fast set-up, simply roll machine over hand-hole or vault. Four pneumatic wheels provide easy jobsite mobility. Designed for one-man s transport, setup and operation. Two pulling speeds 75 fpm and 150 fpm, in forward and reverse. High speed for light cable, low speed for heavy cable. H1000-C 30 Bull-Wheel Capstan Combo Puller Two Pulling Speeds: 75 fpm 150 fpm Safety Foot Switch and Ammeter 18 Radius Duct Roller Optional Capstan, Extension Frame, Adapters 6

Cable Pullers H400-CF HIS CABLE FEEDER is designed to be an easy-touse, lightweight cable-pulling assist. HIS CABLE-FEEDER is not designed for multiple small cables. It is designed for larger single cable or multiple cables bundled in one jacket. Cable-Grip is performed by compression of concave wheels. Maximum pulling capacity is 400 Lbs. Pulling force is created by means of a powered belt wrapped around drive wheels. Lower (3) wheels are drive wheels, upper 3 wheels are idler wheels (nonpowered). All wheels are concave. POWER: 110V-11A. Recommend 3,500W CABLE-GRIP: Compression by means of screw WHEELS, Top: Rubber Concave. Oilite Brgs Foot Switch Controller: F&R, Vari- Speed, Ammeter, Fuse, Momentary Foot Switch WHEELS, Base: (2) Aluminum & (1) COGG. Concave with Oilite Bronze Bearings Dimensions: 24 L x 18 W x 18 H Weight: 125Lbs. Housing: Powdercoated Alum. 7

Cable Reel Stands HCRS-05K HIS Cable Reel Stand HCRS-05K spins cable reel by the central mandrel rather than the outer rim. For this reason the HCRS-05K works well with wooden reels and lighter reels. Can be provided as: (non-powered unit shown) Powered (110V-11A) or Non-Powered With or without Brake With or without Drive Disk Brake - 16 5,000 Lb. Capacity Optional Features: Drives: Variable Frequency Drive (VFD) with Low-Voltage Hand or Foot Controller Standard Electric Motor Drive Reel Guides: Stepped or Tapered - Aluminum or Steel Variable Frequency Drive Spherical Roller Bearings - Instead of Standard Oilite Bronze Bearings Fork Lift Tubes Parallel to Cable Payout - Instead of Perpendicular Lifting Hook-Plates Welded to Frame Center Spindle Support Hand Controller in Addition to Standard Foot Controller Personnel Guards - Ends Only or All Around - Retractable Provides Smoother Operation of the Variable Speed Allows for Full Torque and Range of Speed Hydraulic Drive 8

Cable Reel Stands HCRS-10K HIS Cable Reel Stand HCRS-10K spins cable reel by the central mandrel rather than the outer rim. For this reason the HCRS-10K works well with wooden reels and lighter reels. Can be provided as: (powered unit shown) Powered (110V-11A) or Non-Powered With or without Brake With or without Drive Disk Brake - 16 10,000 Lb. Capacity Optional Features: Drives: Variable Frequency Drive (VFD) with Low-Voltage Hand or Foot Controller Standard Electric Motor Drive Reel Guides: Stepped or Tapered - Aluminum or Steel Variable Frequency Drive Spherical Roller Bearings - Instead of Standard Oilite Bronze Bearings Fork Lift Tubes Parallel to Cable Payout - Instead of Perpendicular Lifting Hook-Plates Welded to Frame Center Spindle Support Hand Controller in Addition to Standard Foot Controller Personnel Guards - Ends Only or All Around - Retractable Provides Smoother Operation of the Variable Speed Allows for Full Torque and Range of Speed Hydraulic Drive 9

Cable Reel Stands HCRS-15K HIS Cable Reel Stand HCRS-15K spins cable reel by the central mandrel rather than the outer rim. For this reason the HCRS-15K works well with wooden reels and lighter reels. The HCRS- 15K is self-contained and easily mounts on a trailer. Can be provided as: Powered (110V-11A) or Non-Powered With or without Brake With or without Drive (powered unit shown) 15,000 Lb. Capacity Disk Brake - 16 Optional Features: Drives: Variable Frequency Drive (VFD) with Low-Voltage Hand or Foot Controller Reel Guides: Stepped or Tapered - Aluminum or Steel Spherical Roller Bearings - Instead of Standard Oilite Bronze Bearings Fork Lift Tubes Parallel to Cable Payout - Instead of Perpendicular Lifting Hook-Plates Welded to Frame Center Spindle Support Hand Controller in Addition to Standard Foot Controller Personnel Guards - Ends Only or All Around - Retractable Standard Electric Motor Drive Variable Frequency Drive Provides Smoother Operation of the Variable Speed Allows for Full Torque and Range of Speed Hydraulic Drive 10

Cable Reel Rollers HCRR-15K HIS Cable Reel Roller HCRR-15K is selfcontained and handles large reels and multiple reels easily and costeffectively. Includes: Heavy Duty Milwaukee Gear Drive and Motor with forward, reverse, and variable speed control 15,000 Lb. CAPACITY Safety Foot Switch with Ammeter, Forward and Reverse Toggle Switch, and Motor Speed Knob Control Optional Features: VFD (Variable Frequency Drive) Drive with Low- Voltage Hand or Foot Controls Nylon Bushings for Center of Reel Adjustable Guide-Disks for Rollers Adjustable Spindle-Support Arms Disk Brake - Typically Mounted on Drive Roller Dual Motor Drives Hand Controller in Addition to Standard Foot Controller No Power Drive Additional Hook-Plates Retractable Drive Motor for Free-Wheeling (*Recommended Addition of Brake) Operator s Guards - Ends Only or All Around - Retractable Support for Footage Counter or Fairlead Cable- Guide 11

Cable Reel Rollers HCRR-30K HIS Cable Reel Roller HCRR-30K is selfcontained and handles large reels and multiple reels easily and costeffectively. Includes: Heavy Duty Milwaukee Gear Drive and Motor with forward, reverse, and variable speed control 30,000 Lb. CAPACITY Safety Foot Switch with Ammeter, Forward and Reverse Toggle Switch, and Motor Speed Knob Control Optional Features: VFD (Variable Frequency Drive) Drive with Low- Voltage Hand or Foot Controls Nylon Bushings for Center of Reel Adjustable Guide-Disks for Rollers Adjustable Spindle-Support Arms Disk Brake - Typically Mounted on Drive Roller Dual Motor Drives Hand Controller in Addition to Standard Foot Controller No Power Drive Additional Hook-Plates Retractable Drive Motor for Free-Wheeling (*Recommended Addition of Brake) Operator s Guards - Ends Only or All Around - Retractable Support for Footage Counter or Fairlead Cable- Guide 12

Cable Reel Rollers HCRR-45K HIS Cable Reel Roller HCRR-45K is selfcontained and handles large reels and multiple reels easily and costeffectively. Includes: Heavy Duty Milwaukee Gear Drive and Motor with forward, reverse, and variable speed control 45,000 Lb. CAPACITY Safety Foot Switch with Ammeter, Forward and Reverse Toggle Switch, and Motor Speed Knob Control Optional Features: VFD (Variable Frequency Drive) Drive with Low- Voltage Hand or Foot Controls Nylon Bushings for Center of Reel Adjustable Guide-Disks for Rollers Adjustable Spindle-Support Arms Disk Brake - Typically Mounted on Drive Roller Dual Motor Drives Hand Controller in Addition to Standard Foot Controller No Power Drive Additional Hook-Plates Retractable Drive Motor for Free-Wheeling (*Recommended Addition of Brake) Operator s Guards - Ends Only or All Around - Retractable Support for Footage Counter or Fairlead Cable- Guide 13

Cable Reel Rollers HCRR-60K HIS Cable Reel Roller HCRR-60K is selfcontained and handles large reels and multiple reels easily and costeffectively. Includes: Heavy Duty Milwaukee Gear Drive and Motor with forward, reverse, and variable speed control 60,000 Lb. CAPACITY Safety Foot Switch with Ammeter, Forward and Reverse Toggle Switch, and Motor Speed Knob Control Optional Features: VFD (Variable Frequency Drive) Drive with Low- Voltage Hand or Foot Controls Nylon Bushings for Center of Reel Adjustable Guide-Disks for Rollers Adjustable Spindle-Support Arms Disk Brake - Typically Mounted on Drive Roller Dual Motor Drives Hand Controller in Addition to Standard Foot Controller No Power Drive Additional Hook-Plates Retractable Drive Motor for Free-Wheeling (*Recommended Addition of Brake) Operator s Guards - Ends Only or All Around - Retractable Support for Footage Counter or Fairlead Cable- Guide 14

Cable Reel Rollers HCRR-90K HIS Cable Reel Roller HCRR-90K is selfcontained and handles large reels and multiple reels easily and costeffectively. Includes: Heavy Duty Milwaukee Gear Drive and Motor with forward, reverse, and variable speed control 90,000 Lb. CAPACITY Safety Foot Switch with Ammeter, Forward and Reverse Toggle Switch, and Motor Speed Knob Control Optional Features: VFD (Variable Frequency Drive) Drive with Low- Voltage Hand or Foot Controls Nylon Bushings for Center of Reel Adjustable Guide-Disks for Rollers Adjustable Spindle-Support Arms Disk Brake - Typically Mounted on Drive Roller Dual Motor Drives Hand Controller in Addition to Standard Foot Controller No Power Drive Additional Hook-Plates Retractable Drive Motor for Free-Wheeling (*Recommended Addition of Brake) Operator s Guards - Ends Only or All Around - Retractable Support for Footage Counter or Fairlead Cable- Guide 15

Tensiometers HTNS10KEP HIS Tensiometer HTNS10KEP is designed to help monitor cable pulling tensions. Digital Display of pulling force with numeric printout with three data points per line. Force Time Rope Selection General Purpose : 0 to 10,000 Lbs. Numeric Print-Out Data Logger Built-In Alarm to Preset Alarm Points with an Enunciator or Cable Pulling Limits Digital Display of Pulling Force with Numeric Print- Out Data Logger can Save All Information that is Printed Out 16

Tensiometers HTNS20KEP HIS Tensiometer HTNS20KEP is designed to help monitor cable pulling tensions. Digital Display of pulling force with numeric printout with three data points per line. Force Time Rope Selection Extremely High Voltage Cable : 0 to 20,000 Lbs. Numeric Print-Out Data Logger Built-In Alarm to Preset Alarm Points with an Enunciator or Cable Pulling Limits Digital Display of Pulling Force with Numeric Print- Out Data Logger can Save All Information that is Printed Out 17

Cable Tray Guides Cable Tray Rollers HIS Cable Tray Roller HB1A-6 is a 6 Split-box type cable roller guide designed to quickly and easily clamp-on to the side of the cable tray and hinge to open and close to allow cable to pass through. Aluminum Base Casting Quick Tee-Handle Clamp-On 6 Zinc Plated or Stainless Steel Rollers 3/8 Locking Pin for Locking and Unlocking Unit HIS Cable Tray Roller HB1A-12 is a 12 Split-box type cable roller guide designed to quickly and easily clamp-on to the side of the cable tray and hinge to open and close to allow cable to pass through. Aluminum Base Casting Quick Tee-Handle Clamp-On 12 Zinc Plated or Stainless Steel Rollers 3/8 Locking Pin for Locking and Unlocking Unit 18

Cable Tray Guides Cross-Tray Rollers HIS Cross-Tray Roller HB4A is an Inside Vertical Riser Roller designed for guiding cable inside vertical risers for cable installation in tray. Aluminum Base Casting Alloy Aluminum Sheave Heat-Treated for Hardness (shown with 10 x 5 Alloy Aluminum Sheave) HIS Cross-Tray Roller HB5A is a Horizontal Elbow Roller designed for guiding cable around horizontal elbows for cable installation in tray. Aluminum Base Casting Alloy Aluminum Sheave Heat-Treated for Hardness HIS Cross-Tray Roller HB6A/7A is an Outside Vertical Riser Roller designed for guiding cable outside vertical risers or for straight runs for cable installation in tray. Three individual units make up the low profile cross-tray roller assembly Aluminum Base Casting 6 Zinc Plated or Stainless Steel Rollers 3/8 Locking Pin for Locking and Unlocking Unit HIS Cross-Tray Roller HB9A is an Outside Vertical Riser Roller designed for guiding cable outside vertical risers or for straight runs for cable installation in tray. A single unit makes up the assembly. Aluminum Base Casting 6 Zinc Plated or Stainless Steel Rollers 3/8 Locking Pins for Locking and Unlocking Unit 19

Cable Tray Guides Universal Roller HIS Universal Cable Tray Roller HB1A-9 is a hybrid roller guide between the splitbox design of the HIS HB1A and the size of the HIS HB9A, and can also be used on horizontal elbows. Can be Mounted on the Cross-Bar Can be Extended Above or Below Cable Tray with a Cross-Bar and Extended Tray Clamps Can be Mounted on the side of the Cable Tray using the Quick Side-Tray Clamp 20

HIS Duct Rollers are designed to assist in guiding cables INTO ducts or conduit and help reduce Cable -Scuffing on the edge of duct or conduit. The Slotted-Duct Adapter assists in removing this tool from the cable, once the cable is pulled into place. Available with all standard sheave materials. Sheaves & Blocks Duct Rollers HDR1.5-3x3A#40-MINI HDR2-3x3A#40-MINI HDR2.5-3x3A#40-MINI HDR3-3x3A#40-MINI HIS HDR2-6x5 2 Standard Duct Roller Duct Size: 2 Sheave Size: 6 x 5 HDR2-6x5A#40 HDR2-6x5AS#40 HDR2-6x5N#40 HIS HDR3-6x5 3 Standard Duct Roller Duct Size: 3 Sheave Size: 6 x 5 HDR3-6x5A#40 HDR3-6x5AS#40 HDR3-6x5N#40 HIS HDR4-6x5 4 Standard Duct Roller Duct Size: 4 Sheave Size: 6 x 5 HDR4-6x5A#40 HDR4-6x5AS#40 HDR4-6x5N#40 HIS HDR4-10x5 4 Standard Duct Roller Duct Size: 4 Sheave Size: 10 x 5 HIS HDR4-12x5 4 Standard Duct Roller Duct Size: 4 Sheave Size: 12 x 5 HDR4-10x5N#40 HDR4-12x5AS#40 21

Sheaves & Blocks Radius Duct Rollers HIS Radius Duct Roller HDR9R creates a large bend radius at a 90 degree angle for FEEDING or PULLING cable. The HDR9R is available with a 3 frame with (4) 3 x 3 aluminum sheaves. The 3 frame supports 1, 1.25, 2, 2.5 and 3 Duct Adapters. HIS Radius Duct Rollers protect side-wall pressure of cable when pulling cable out of ducts. Alloy Aluminum or Nylatron Sheaves HIS Radius Duct Roller HDR12R creates a large bend radius at a 90 degree angle for FEEDING or PULLING cable. The HDR12R is available with a 3, 5 or 7 frame and supports a wide variety of Duct Adapters. HIS Radius Duct Rollers protect side-wall pressure of cable when pulling cable out of ducts. Alloy Aluminum or Nylatron Sheaves HIS Radius Duct Roller HDR18R creates a large bend radius at a 90 degree angle for FEEDING or PULLING cable. The HDR18R is available with a 3, 5 or 7 frame and supports a wide variety of Duct Adapters. HIS Radius Duct Rollers protect side-wall pressure of cable when pulling cable out of ducts. Alloy Aluminum or Nylatron Sheaves HIS Radius Duct Roller HDR24R creates a large bend radius at a 90 degree angle for FEEDING or PULLING cable. The HDR24R is available with a 3, 5 or 7 frame and supports a wide variety of Duct Adapters. HIS Radius Duct Rollers protect side-wall pressure of cable when pulling cable out of ducts. Alloy Aluminum or Nylatron Sheaves 23

Sheaves & Blocks Quadrant Blocks Mini Series Standard Series Heavy Duty Series HQB18R-3x3A 3 Frame HQB24R-6x5A 5 Frame HQB36R-12x7A 7 Frame HIS Quadrant Blocks are designed for FEEDING or PULLING cable whenever a large bend radius is required. Quadrant Blocks can be used underground, at vault rim or in cable tray. The multi-sheave unit is available in 3, 5 and 7 widths and 9, 12, 18, 24, 36, 48 and 60 radius. HIS Quadrant Blocks are available with Aluminum, Aluminum / Chromoly Steel or Nylatron sheaves. Also available in 8 widths 24

Sheaves & Blocks Hook Blocks HIS Hook Block HHB-18/24/36R is a 3-sheave unit with an adjustable center sheave. As the center sheave is adjusted, the bend radius is also adjusted. 18 Radius Available in 5 or 7 Widths (3) Alloy Aluminum Sheaves 5-Ton Capacity Powder-Coated Steel Frame HIS Hook Block is a 3-sheave unit with an adjustable center sheave. As the center sheave is adjusted, the bend radius is also adjusted. Placing the center sheave at the lowest position creates a 36 bend radius and a 120 degree bend angle, resulting in a less sharp angle. Placing the center sheave at the middle position creates a 24 bend radius at a 105 degree angle. Placing the center sheave at the top position creates an 18 bend radius at a 90 degree bend angle. HIS Hook Blocks are used for guiding cable as required and typically not used for pulling cable around 90 degree bends. 25

Sheaves & Blocks Hook Sheaves HIS Hook Sheaves are designed to be easy to use and durable. The high capacity load rating assures top performance in the field. HIS Hook Sheaves are available in 3, 5, 7 and 8 widths and are available with alloy aluminum, alloy aluminum with Chromoly steel center or Nylatron. HIS Sheaves are 356-alloy aluminum heat-treated to T6 hardness. 14, 22 and 26 diameter sheaves have a 3.75 extra-deep cable well. HIS Hook Sheaves feature CROSBY hooks with a safety latch. (shown HHS18x24x7T) 26

Sheaves & Blocks Rim Rollers HIS Rim Roller HRR-6x5A is a single sheave, lightweight high-strength sheave-type cable guide. Use this tool for cable feed-in or cable pull-out. Housing: Powder-Coated Steel Sheave: 6 x 5 Bend-Radius: 1.5 HIS Rim Roller HRR-D12x7A is a double sheave, lightweight high-strength sheave-type cable guide. Use this tool for cable feed-in or cable pull-out for vaults and hand-holes. Protects cable from scuffing on rim of vault. Pull force locks unit to edge of vault. Can be used for large diameter cable Housing: Powder-Coated Steel (2) Sheaves: 12 x 7 Available in 5 and 7 widths HIS Rim Roller HRRSTL-12R is specifically designed for pulling wire line. Designed to guide cable INTO vault when feeding cable or OUT of vault when pulling cable. The HRRSTL-12R is provided with (2) vertical guide rollers and (2) heavy-duty horizontal Force Rollers, with an option to add up to two more Force Rollers. Powder-Coated Steel Housing. Force Roller Options: Chromoly Steel, Alloy Aluminum, Nylatron (Shown with (3) Chromoly Steel Heavy-Duty Force Rollers) HIS Rim Roller HRRSTL-18R is specifically designed for pulling wire line. Designed to guide cable INTO vault when feeding cable or OUT of vault when pulling cable. The HRRSTL-18R is provided with (2) vertical guide rollers and (3) heavy-duty horizontal Force Rollers, with an option to add up to two more Force Rollers. Powder-Coated Steel Housing. Force Roller Options: Chromoly Steel, Alloy Aluminum, Nylatron (Shown with (5) Nylatron Heavy-Duty Force Rollers) 27

Sheaves & Blocks Standard Sheaves HIS Standard Sheave 6x5A 6 x 5 Alloy Aluminum Sheave Heat-Treated HIS Standard Sheave 6x5AS 6 x 5 Alloy Aluminum Sheave with Chromoly Steel center HIS Standard Sheave 6x5AN 6 x 5 Nylatron Sheave HIS Standard Sheave 10x5A 10 x 5 Nylatron Sheave HIS Standard Sheave 12x5AS 12 x 5 Alloy Aluminum Sheave with Chromoly Steel center 28

Sheaves & Blocks Standard Sheaves HIS Standard Sheave 12x5N 12 x 5 Nylatron Sheave HIS Standard Sheave 12x7A 12 x 7 Alloy Aluminum Sheave Heat-Treated HIS Standard Sheave 12x7AS 12 x 7 Alloy Aluminum Sheave with Chromoly Steel center HIS Standard Sheave 12x7N 12 x 7 Nylatron Sheave 29

Business Manufacturing Co. Manufacturers of Equipment for the Electrical and Telecommunications Industries HIS Cable Pulling Products are manufactured by us in our modern facility in El Cajon, California. The most advanced manufacturing technologies are employed for efficiency and accuracy, ensuring quality, reliable products at affordable prices. was started in 1976 by John (Jack) Ireton with one product, a revolutionary cable puller. Since then, our company has grown to offer almost 300 products for all sorts of cable installation. The philosophy Jack instilled in the company remains: To create a high quality product with unique features that stands up against the most rigorous field conditions and continues to perform year after year, with minimal maintenance Remember, if you don t see what you are looking for in this catalog, just ask. HIS Business Mfg. Co. 1180 No. Johnson Ave. El Cajon, CA 92020 (800) 292-9831 Fax: (619) 447-4695 Visit us on the web: hizbiz.com Email us: sales@hizbiz.com Made in the U.S.A.