Crawler Excaator R 926 Copact Engine 129 kw / 17 HP Stage I Operating Weight 2,4 29, kg Bucket Capacit. 3
Engine 129 kw / 17 HP Stage I Operating Weight 2,4 29, kg Bucket Capacit. 3 2 R 926 Copact Litronic Perforance Efficienc Perforance, precision and responsieness High leel of productiit for a lower oerall operating cost
Reliabilit Cofort Maintainabilit Result of ongoing iproeents Spacious, ergonoic and with high-isibilit Siplified dail checks, longer aintenance interals R 926 Copact Litronic 3
Perforance Perforance, Precision and Responsieness 4 R 926 Copact Litronic
High Productiit for Extraction and Loading Boasting a rotation radius of 1.7 at the rear and until 1.9 at the front, the R 926 Copact is perfectl stable and suitable for the narrowest of worksites. The exceptional hdraulic perforance of Liebherr excaators eans shorter work ccles and higher productiit for extraction and loading. The Liebherr Sste Tool-Manageent The Tool-Manageent function akes it eas to change tools thanks to the tool recognition RFID sste. The prograed pressure and flow alues are aailable fro the oent the hdraulic tool is changed. This increases productiit thanks to the shorter fitting ties. A Wide Range of Attachents The R 926 excaator is suitable for all tpes of works, thanks to a wide range of Liebherr tools. Different sticks can be cobined with a ariet of boos (onoblock, offset onoblock and luffing boos). Finall, an optional leelling blade copletes the ersatilit of the achine. Then, to ake toolchanging easier, Liebherr offers a SWA quick-change attachent and the LiKUFIX sste as options. Cutting-Edge Technolog for Top-Leel Perforance The R 926 crawler excaator incorporates Liebherr s Positie Control hdraulic sste. This sste is controlled b Liebherr electronics, using strategicall-positioned sensors. All of the achine s work is therefore faster, ore accurate and fluid. What s ore, as the two hdraulic pup circuits can operate either separatel or in unison, this optiises the energ anageent of the R 926. Intelligent Operating Modes Sensitie Mode: for accurate lifting work Econo ode: for an econoic and ecological operation. Recoended for noral working conditions Power Mode: for powerful excaation capacities in difficult applications Full Power Mode: especiall designed for higher power, ideal for extree applications A D924 Liebherr Engine that is Een Cleaner and with Enhanced Perforance New otor coplies with the European Stage I exhaust gas eission regulations thanks to its oxidation catalst technolog and SCR urea injection The ost cutting-edge technolog with the Coon-Rail sste without EGR ale and particle filter Autoatic idling optiises energ efficienc An Accurate and Efficient Dozer Blade Radial fan blade Different blade lengths aailable Exeplar dozing accurac and qualit Onl two lubrication points Integral protection of clinder rods as standard Fitted tie-down rings R 926 Copact Litronic
Efficienc High Leel of Productiit for a Lower Oerall Operating Cost 6 R 926 Copact Litronic
Multi-Purpose The R 926 Copact is a ulti-purpose achine that can be used for a great ariet of purposes: its copact structure eans it is perfect for worksites where space is restricted, such as town centres, roadworks or narrow forest tracks. What s ore, it is capable of perforing the traditional work of a standard crawler excaator, such as earth-oing, pipelaing, deolition and aterial-handling works. Eas Access All the aintenance points hae been designed for eas access and to shorten interention ties. The gull-wing hood openings allow all operations to be perfored fro the ground. The operations can be carried out in coplete safet, whether the concern the air filter, the fuel filters, the engine oil filter and the radiators or the checking of engine oil leels. Copact Equipent The kineatics of the attachents especiall designed for the R 926 Copact allow for effectie operations, een at heights, thanks to the boo joint being er close to the achine s centre of rotation. The total rotation radius can be equal to 1.9. Intelligent Energ Manageent The integrated engineering of Liebherr s sstes allows constant onitoring of the fuel consuption and the urea solution thanks to the effectie anageent of the engine and hdraulics. The new diesel engine, the new DOC / SCR exhaust after-treatent sste, autoatic idling / engine speed increase, electronic engine speed sensing regulation and Regeneration Plus are just soe of the eleents that contribute towards better energ anageent. This consuption control greatl reduces the discharge of toxic gases into the atosphere while iniizing operating costs. Autoatic Centralised Lubrication Sste as Standard Full autoated centralised lubrication sste as standard for rapid aintenance, less anual lubrication and shorter achine downtie Coers all the lubrication points of the uppercarriage and equipent, other than the connecting link (optional) Adequate lubrication of each joint guaranteed, for a longer serice life of the oing parts Safet aspect: the lubrication can be perfored without the operator haing to leae the cab LiKUFIX and Tool-Manageent Ideal for worksites requiring tool changes Mechanical and hdraulic coupling of tools possible without leaing the cab Optiised excaator operation with autoatic tool change sste Intelligent Tool-Manageent option, for autoatic tool detection, pressure and corresponding flow adjustent Liebherr Lubricants Liebherr lubricants are speciall deeloped for application in Liebherr earth oing and aterial handling achines and guarantee a long working life whilst siultaneousl deliering the highest possible perforance Being designed especiall for our Liebherr achines, Liebherr lubricants contribute significantl to lowering our operating and aintenance costs R 926 Copact Litronic 7
Reliabilit Result of Ongoing Iproeents 8 R 926 Copact Litronic
Accuratel-Sized Mechanical Structures The R 926 Copact is a er robust, powerful and reliable achine, ideal for all tpes of works, including difficult applications. The attachents are fitted with oulded steel parts, strategicall positioned on the joints. Furtherore, thanks to the continuous optiisation and ssteatic nuerical siulation of the structures, the can achiee the long serice life our custoers require. Qualit in the Minutest Details The hdraulic, electric and lubrication lines are laid out to ensure optiu operating safet and the peranent uptie of the achine. The top-coat applied prior to assebl, as well as the surface treatent of the parts ensures a axiu protection against corrosion. A Robust X-shaped design for iproed stress distribution and a longer serice life Eas to aintain thanks to the wide openings under the track rollers and the fastening of the steps to the ertical side of the track carriers aried range of optional features such as dozing blade, rubber track pads or a fitted tool box to adapt to all tpes of worksites The Cab Operator s Protection The cab is fitted with a roll-oer protection sste (ROPS), pursuant to ISO standard 12117-2. Inisible, it allows the operator to work in coplete tranquilit. Autoatic Operation Monitoring The operator can concentrate full on the task: the integrated on-board electronics ensure a constant readjustent to preset alues. The operator can also access the operating paraeters ia the onitoring displa. Liebherr Ke Coponents A perfect haronisation of the achine s eleents for worksite applications The ain echanicall-welded structures, (undercarriage, attachent and uppercarriage) designed b Liebherr Manufactured b Liebherr: hdraulic pups pup reducer translation echanis swing echanis swing ring electronic coponents Liebherr Genuine Parts 98 % aailabilit fro central warehouse Oernight serice* Online docuentation sste Reliable suppl for ears to coe, een after series production has stopped * Aailabilit depends on product and countr R 926 Copact Litronic 9
Cofort Spacious, Ergonoic and with High-isibilit 1 R 926 Copact Litronic
A First Class Work Space In this new cab, the operator has a pneuatic seat with longitudinal and ertical pneuatic daping as standard, an enlarged space and a er cofortable work enironent. Depending on the operator s needs, the Liebherr Preiu seat can be chosen as an option. This seat offers axiu seating cofort thanks to its pneuatic lubar support, its electronic weight-actuated height adjustor as well as its airconditioning with actiated charcoal and built-in fan. 7" Colour Touch Screen A true control panel, this Liebherr designed and anufactured robust and reliable touch screen (ingress protection IP 6) offers nuerous adjustent and onitoring options, such as the fuel consuption and urea solution dela, airconditioning, tool control, radio, etc. And thanks to its highresolution ideo copatibilit, it can also displa the iages fro the rear and side backup caera. Low Noise Leel and ibrations To increase the operator s cofort and productiit, the noise leel inside the operator s cab is exceptionall low. The cab is ounted on iscoelastic riets to full absorb ibrations. The rubber flanges that support the pipes also actiel participate in reducing external noise. Large Storage Spaces Storage spaces behind the seat, with optional chiller for keeping drinks cool at all ties Full retractable windscreen, stowable under the roof 12 plug for operating the optional chiller and all other tpes of appliances Optional foot-rest aailable for enhanced cofort especiall when working on inclines Ergonoic and Precise Josticks Sensitie josticks with proxiit sensors allow greater responsieness while resuing rp and engine idling Ergonoical josticks positioned for greater cofort during work and ore accurate oeent The proportional control allows a er fine anoeurabilit for a sensitie, accurate and ore fluid operation of hdraulic tools High isibilit Rear iew and right hand side iew onitoring caera sealessl integrated for isibilit and heightened operating safet Optiised design of the whole uppercarriage gies the operator a wider field of ision R 926 Copact Litronic 11
Maintainabilit Siplified Dail Checks, Longer Maintenance Interals 12 R 926 Copact Litronic
Siplified Dail Checks The dail checks were taken into account fro the start of the design, to ake the sipler, ore accessible and shorter. The fuel or diesel exhaust fluid leels, for exaple, can be checked ia the displa in the operator s cab. The full-autoatic central lubrication sste can sae precious interention tie, while guaranteeing that the excaator is in optiu operating condition and has a long life. Longer Serice Interals The frequenc of the serice interals is optiised to guarantee that each part is operating optiall and that the aintenance operations are onl perfored as necessar. Whether it is the interal for changing the hdraulic oil, which can be up to 8, hours, or for changing the engine oil, eerthing has been taken into account to reduce the frequenc of interentions and thus liit the achine s downtie and reduce costs. LiDAT Data Transfer Sste Coplete fleet anageent, all fro one source Optiized econoical perforance of the achine park thanks to detailed iew of the distribution of operating states and ties Reports on capacit coitent and the use of the achine park can be called up dail ia the Web portal Precise location of the achine Regional deliitation and fixed downties increase safet and reliabilit A Maintenance-Free Exhaust Gas Treatent The exhaust gas treatent is carried out in copliance with the Stage I standards, without the use of a particle filter or EGR ale. This results a axiu reliabilit in an output with no loss of productiit linked to the regeneration of this filter and, of course, there is no aintenance tie or cost for spare parts associated with this technolog. Expert Adice and Serice Proisions Liebherr offers an expert adice serice. Qualified personnel will help ou ake the appropriate decisions to eet our needs: sales arguents based on the terrain, serice agreeents, adantageous repair alternaties, original parts anageent, and reote data transfer for fleet anageent. Hdraulic Reseroir Stop ale Eas and quick isolation of the oil circuit between hdraulic reseroir and hdraulic sste No drainage of fluid necessar for serice or repair work on the hdraulic sste Central Lubrication Sste The full-autoatic central lubrication sste, fitted as standard, allows for rapid aintenance: it saes tie-consuing indiidual lubricating and downtie All the lubrication points on the superstructure of the undercarriage and the attachent hdraulics are supplied, with the exception of the connecting plate Engine oil leel isible on displa Coolant and swing gearbox oil leels isible fro the operator seat R 926 Copact Litronic 13
Long Lie Progress with the R 926 Copact ariet of Robust Attachents Cast steel joints for greater stress resistance Parts hae a long serice life thanks to the autoated lubrication, fitted as standard Wide choice of attachents to adapt the excaator to the custoer s needs Kineatics and equipent speciall designed for the R 926 Copact A Multi-Purpose Tool Holder Wide range of specific Liebherr buckets and tools Patented Liebherr Z tooth sste for increased productiit SWA LiKUFIX quick coupling for greater flexibilit (optional) A Reliable Reliable and robust X-undercarriage that is eas to tie down thanks to the integrated eelets Maintenance-free trael gear sste and lifetie-lubricated track rollers for eas aintenance Seeral dozer blades aailable (optional) Rubber track pads for urban use (optional) 14 R 926 Copact Litronic
A er Cofortable Operator s Workstation Spacious and air-conditioned work space for increased productiit Pneuatic seat with longitudinal and ertical pneuatic daping as standard 7" high resolution, eas-to-use, colour touch screen Full retractable window screen The Latest Technologies for Higher Perforance New Stage I engine technolog with oxidation catalst and SCR urea sste without EGR ale and particle filter Autoatic idling / engine speed increase Liebherr Positie Control hdraulic sste for ore accurate and fluid oeents Shorter Maintenance Tie Copletel new aintenance concept with eleents within ar s reach, accessible fro the ground Filters grouped together for shorter aintenance interentions Adequate lubrication guaranteed thanks to autoatic centralised lubrication sste, fitted as standard Motor oil leel accessible fro ground-leel for checking and filling Shut-off ale at the outlet of the hdraulic tank R 926 Copact Litronic 1
Technical Data Engine Rating per ISO 9249 Torque Model Tpe Bore Stroke Displaceent Engine operation Exhaust gas treatent Option Cooling sste Air cleaner Fuel tank Urea tank Electrical sste oltage Batteries Alternator Engine idling Hdraulic Sste 129 kw (17 HP) at 1,9 RPM 682 N at 1,4 RPM Liebherr D924 A7-4 4 clinder in-line 14 132 l 4-stroke diesel Coon-Rail turbo-charged and after-cooler SCR with urea injection eission standard stage I / Tier 4 Final particle filter water-cooled and integrated otor oil cooler dr-tpe air cleaner with pre-cleaner, priar and safet eleents 331 l 4 l 24 2 x 13 Ah / 12 three-phase current 28 / 14 A sensor controlled Hdraulic Controls Power distribution Sero circuit Attachent and swing Chassis Additional functions ia control ales with integrated safet ales, siultaneous and independent actuation of chassis, swing drie and attachent proportional ia jostick leers with proportionall functioning foot pedals or adjusted with a plugable leer speed pre-selection proportional regulation ia foot pedals or ini- jostick Hdraulic sste Hdraulic pup for attachent and trael drie Max. flow Max. pressure Pup anageent Hdraulic tank Hdraulic sste Hdraulic oil filter Cooling sste MODE selection Engine speed and perforance setting Tool Control Transission Swing ring Lubrication R 926 Copact Litronic Liebherr, ariable displaceent, swashplate double pup 2 x 223 l/in. 3 bar electronic pup anageent ia the integrated sste controlling (CAN-BUS) snchronous to the control block. Open circuit for the rotation 13 l ax. 36 l 1 ain return filter with integrated partial icro filtration (1 µ) copact cooler, consisting of a water cooler, sandwiched with hdraulic oil cooler, gearbox oil cooler, fuel cooler and after-cooler cores and hdrostaticall drien fan adjustent of engine and hdraulic perforance ia a ode pre-selector to atch application, e.g. for especiall econoical and enironentall friendl operation or for axiu digging perforance and hea-dut jobs stepless alignent of engine output and hdraulic power ia engine speed 1 preadjustable pup flows and pressures for add-on tools Swing Drie Drie Swing speed Swing torque Holding brake 16 Positie Control dual circuit hdraulic sste for independent and need-based quantit allotent ia the hdraulic pups; sensor-guided features high sste dnaics and sensitiit proided b inte grated sste controlling Liebherr swashplate otor with integrated brake ale and torque control Liebherr copact planetar reduction gear Liebherr, sealed race ball bearing swing ring, internal teeth 1 RPM stepless 84 kn wet ulti-disc (spring applied, pressure released) Liebherr central lubrication sste
Operator s Cab Cab Operator s seat Control sste Operation and displas Air-conditioning Refrigerant Global waring potential Quantit at 2 C * CO2 equialent ibration eission Hand / ar ibrations Whole-bod ibrations ROPS safet cab structure (roll-oer protection sste) with indiidual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a sliding window (can be opened on both sides), large stowing and depositing possibilities, shock- absorbing suspension, sounddaping insulating, tinted lainated safet glass, separate window shades for the sunroof window and windscreen, cigarette lighter and 12 plug, cup holder Cofort seat, airsprung with autoatic weight adjustent, ertical and longitudinal seat daping including consoles and josticks. Seat and arrests adjustable separatel and in cobination, seat heating as standard, folding console josticks with ar consoles and swiel seat large high-resolution operating unit, selfexplanator, colour displa with touchscreen, ideo- copatible, nuerous setting, control and onitoring options, e.g. air conditioning control, fuel consuption, achine and tool paraeters autoatic air-conditioning, recirculated air function, fast de-icing and deisting at the press of a button, air ents can be operated ia a enu. Recirculated air and fresh air filters can be easil replaced and are accessible fro the outside. Heating-cooling unit, designed for extree outside teperatures, sensors for solar radiation, inside and outside teperatures (countr- dependent) the air conditioning sste contains fluorinated greenhouse gases R134a 1,43 1,22 g 1.7 t LC Drie Transission Maxiu trael speed Net drawbar pull on crawler Option Track coponents Track rollers / Carrier rollers Tracks Track pads Holding brake Brake ales Lashing ees gauge 2,38 Liebherr swashplate otors with integrated brake ales on both sides Liebherr copact planetar reduction gear low range k/h high range k/h 27 kn 226 kn B6, aintenance-free 9/2 sealed and greased triple grouser wet ulti-disc (spring applied, pressure released) integrated into trael otor integrated Attachent Hdraulic clinders Bearings Lubrication Liebherr clinders with special seal-sste, shock protection sealed, low aintenance Liebherr central lubrication sste < 2. /s2, according with ISO 349-1:21 confors to technical report ISO/TR 2398:26 Measuring inaccurac according with standard EN 1296:1997 * alid for standard achine without operator s cab eleation and without height adjustable cab R 926 Copact Litronic 17
Diensions A D W H2 H1 H C K P Q S B G X D1 R472 N L U D I J F L U U1 18 R 926 Copact Litronic B B2 G R472
LC LC with blade A 2,98 C 3,8 D 1,7 F H1) 3,41 2) H1 3,7 H2 2,3 I J K 1,7 L 3,838 P 9 Q 46 S 2,38 U 4,7 U1 N 6 7 7 8 9 B 2,98 3,8 3,13 3,18 3,28 B2 G 2,92 2,92 3,123) 3,223) 3,223) 1) ounted handrail 2) unounted handrail 3) width with reoable steps Stick Mono boo length 2.3,6,3,1 W 2.3 3, 3, 3, X 2.3 9, 9, 9, D14) 2.3 2,1 2, 1,9 D1) 2.3 2,2 2.64 2,1 2, 4) without quick coupler with bucket ) with quick coupler and bucket 6 2,98 3, 2,92 7 3,8 3,1 2,92 Two-piece boo Mono boo offset 6,,8, 3, 3,1 3,1 9,3 9,4 9,4 2, 1,9 1,9 2,1 2, 1,9,7,4,1 2,9 2,9 2,9 9, 9, 9, 2,2 2,1 2, 2,3 2,2 2,1 7 3,13 3,123) 8 3,18 3,223) 2,98 3,8 1,7 1,18 3,41 3,7 2,3 67 1,43 1,7 3,838 9 46 2,38 4,7,44 9 3,28 3,223) R 926 Copact Litronic 19
Backhoe Bucket with Mono Boo and Counterweight t ft 3 12 R474 Digging Enelope with quick coupler Stick length Max. digging depth Max. reach at ground leel Max. duping height Max. teeth height 11 1 3 9 8 2 2 7 Forces 6 without quick coupler Max. digging force (ISO 61) Max. breakout force (ISO 61) Max. digging force (SAE J1179) Max. breakout force (SAE J1179) 1 4 1 1 2 3 2.3 6.2 6. 6.8 9.2 9.4 9.7 7.9 8.1 1.7 1.9 11.1 kn kn kn kn 1 12 14 113 12 2 11 14 1 12 3 12 14 97 12 3 2 Operating Weight and Ground Pressure 1 The operating weight includes the basic achine with counterweight t, ono boo, stick, quick coupler SWA 48 and bucket.8 3 (63 kg). LC Pad width 6 7 7 8 9 Weight kg 2,4 2,9 26,1 26,2 26,6 Ground pressure kg/c2.1.4.42.39.3-1 - -2-3 -1 LC with blade Pad width 6 7 7 8 9 Weight kg 27,1 27,6 27,8 27,9 28,4 Ground pressure kg/c2..48.4.42.38-4 -1 - -6-2 1-7 -2-8 11 1 3 9 3 8 7 2 6 2 2 3 4 1 3 1 2 1 ft Weight4) Weight 3) Capacit ISO 741 Cutting width Buckets Machine stabilit per ISO 167* (7 % of tipping capacit) LC- (with track pads 6 ) LC- with blade (with track pads 6 ) Stick length () without quick coupler with quick coupler 2.3 2.3 Stick length () without quick coupler with quick coupler 2.3 2.3 HD2) STD1) 3 kg kg 6. 48 1 8.6 2 1,.8 6 63 1,2 1. 68 71 1,4 1.1 7 78 1,2 1.2 89 92 1,4 1.3 8 88 1,4 9 98 6. 4 7 8.6 8 61 1,.8 67 7 1,2 1. 77 8 1,4 1.1 8 88 1,2 1.2 97 1, 1,4 1.3 93 96 1,4 1,9 1,12 * Indicated loads are based on ISO 167, at axiu reach, and a be swung 36 on fir and een ground 1) Standard bucket with teeth Uni 3-3 2) HD bucket with teeth Uni 3-3 3) Bucket for direct ounting 4) Bucket for ounting to quick coupler Other buckets aailable upon request Max. aterial weight = 2. t/3, = 1.8 t/3, = 1.6 t/3, = t/3, = 1.2 t/3 2 R 926 Copact Litronic
Lift Capacities with Mono Boo, Counterweight t and Track Pads 6 7.4* 7.4* 8.7* 8.7* 12.2* 12.2* 11.4* 11.4* 1.2* 1.2* * * 7.4* 7.4* 8.7* 8.7* 12.2* 12.2* 11.4* 11.4* 1.2* 1.2* * * 6.8* 6.8* 7.2* 7.2* 8.4* 7.1 9.9* 6.6 1.9* 6.4 1.8* 6.4 9.9* 6. 8.1*.2. 4.7 4.4 6.4* 6.8* * 8. * * 6.8* 6.8* 7.2* 7.2* 8.2 8.4* 7.6 9.9* 7.1 1.9* 6.9 1.8* 6.9 9.9* 7. 8.1*.3 4.7 4.7 6.4* 6.8* * 8.* 8. * * 3.7 3.6 7.* * 3.6 4.4 4.6* 7.* * 4.6 3.8 4.7 4.6* 7.* *.3* * 6.1* * 4.6* 7.* *.3* * 6.1* * 4.6* 6.7 7.4 7.6 7. 6.7 7.4 7.6 7..* * 3.8 2.8 3.7 *.* * 4.1 4. *.* * 4.1* 4.1* * 4.7*. * *.* * 4.1* 4.1* * 4.7* * * 4.4 6.2 7.3 8. 8.3 8.3 8.1 7.6 6.7.2 4.4 6.2 7.3 8. 8.3 8.3 8.1 7.6 6.7.2 LC 9. 9. Stick LC with blade LC with blade LC Stick 2.3 9. 9. 7.3* 7.3* 11.2* 11.2* * * 1.8* 1.8* 11.1* 11.1* 7.* 7.* 7.3* 7.3* 11.2* 11.2* * * 1.8* 1.8* 11.1* 11.1* 7.* 7.* 6.4* 6.4* 6.8* 6.8* 8.* 7.2 9.6* 6.7 1.7* 6.4 1.9* 6.4 1.1* 6. 8.* * *.2. 6.1* 6.6* 7.3* 7.9* 7.6* 6.3* 6.4* 6.4* 6.8* 6.8* 8.* 8.* 9.6* 7.2 1.7* 6.9 1.9* 6.9 1.1* 7. 8.* * * 4.9 4.7 4.6 4.7 6.1* 6.6* 7.3* 7.9* 7.9 7.6* 6.3* * 3.8 3.7 3.6 * * 4.9* 4. 4..* * 4.9* 3.7 3.6 4.4.* * 4.9* 4.7* 4.7* 4.9*.3 *.* * 4.9* 4.7* 4.7* 4.9*.2 *.* 3.8 7. 8. 8.1 7.3 6.4 3.8 7. 8. 8.1 7.3 6.4 LC with blade LC Stick 9. 9. Height 1.3* 1.3* 6.2* 6.2* 1.3* 1.3* 11.9* 11.9* 8.2* 8.2* 1.3* 1.3* 6.2* 6.2* 1.3* 1.3* 11.9* 11.9* 8.2* 8.2* * * 6.4* 6.4* 7.6* 7.6* 7.3 9.3* 6.7 * 6.4 1.9* 6.3 1.3* 6.4 8.9* 6.2* 6.2* 4.9*.3 4.2 4.9* * 6.4* 7.1* 6.7* * * 6.4* 6.4* 7.6* 7.6* 9.3* 7.2 * 6.9 1.9* 6.8 1.3* 6.9 8.9* 6.2* 6.2* 4.9* 4.9 4.7 4.6 4.6 4.9* * 6.4* 7.1* 7.9 6.7* Can be slewed through 36 * 3.8 3.7 3.6 * In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The load alues are quoted in tons (t) at stick end (without bucket), and a be swung 36 on fir and een ground. Adjacent alues are alid for the undercarriage when in the longitudinal position. Capacities are alid for 6 wide track pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit (indicated ia *). Without bucket c linder, link and leer the lift capacities will increase b 28 kg. Lifting capacit of the excaator is liited b achine stabilit and hdraulic capacit. According to European Standard, EN 474-: In the European Union excaators hae to be equipped with an oerload warning deice, a load diagra and autoatic safet check ales on hoist clinders and stick clinder(s), when the are used for lifting operations which require the use of lifting accessories. R 926 Copact Litronic 21
Backhoe Bucket with Two-Piece Boo and Counterweight t ft 3 12 R47 1 3 9 8 2 2 Forces 6 without quick coupler Max. digging force (ISO 61) Max. breakout force (ISO 61) Max. digging force (SAE J1179) Max. breakout force (SAE J1179) 4 1 1 2 3 2.3 6. 6.8 7.1 9. 9.7 8.2 8.4 8.6 11.2 11.4 11.7 7 1 Digging Enelope with quick coupler Stick length Max. digging depth Max. reach at ground leel Max. duping height Max. teeth height 11 kn kn kn kn 1 12 14 113 12 2 11 14 1 12 3 12 14 97 12 3 2 Operating Weight and Ground Pressure 1 The operating weight includes the basic achine with counterweight t, two-piece boo, stick, quick coupler SWA 48 and bucket.8 3 (63 kg). LC Pad width 6 7 7 8 9 Weight kg 26, 27, 27,2 27,3 27,7 Ground pressure kg/c2.3.47.44.41.37-1 - -2-3 -1 LC with blade Pad width 6 7 7 8 9 Weight kg 28,2 28,7 28,9 29, 29, Ground pressure kg/c2.7..47.44.4-4 -1 - -6-2 1-7 -2-8 11 1 3 9 3 8 7 2 6 2 4 1 2 3 3 1 2 1 ft Weight4) Weight 3) Capacit ISO 741 Cutting width Buckets Machine stabilit per ISO 167* (7 % of tipping capacit) LC- (with track pads 6 ) LC- with blade (with track pads 6 ) Stick length () without quick coupler with quick coupler 2.3 2.3 Stick length () without quick coupler with quick coupler 2.3 2.3 HD2) STD1) 3 kg kg 6. 48 1 8.6 2 1,.8 6 63 1,2 1. 68 71 1,4 1.1 7 78 1,2 1.2 89 92 1,4 1.3 8 88 1,4 9 98 6. 4 7 8.6 8 61 1,.8 67 7 1,2 1. 77 8 1,4 1.1 8 88 1,2 1.2 97 1, 1,4 1.3 93 96 1,4 1,9 1,12 * Indicated loads are based on ISO 167, at axiu reach, and a be swung 36 on fir and een ground 1) Standard bucket with teeth Uni 3-3 2) HD bucket with teeth Uni 3-3 3) Bucket for direct ounting 4) Bucket for ounting to quick coupler Other buckets aailable upon request Max. aterial weight = 2. t/3, = 1.8 t/3, = 1.6 t/3, = t/3, = 1.2 t/3, = not authorised 22 R 926 Copact Litronic
Lift Capacities with Two-Piece Boo, Counterweight t and Track Pads 6 8.1* 8.1* 9.4* 13.6* 13.8* 14.1 1 1 1 7.6* 8.1* 8.1* 9.4* 13.6* 13.8* 14.7 14.4 1 13.8 7.6* 8.1* 8.1* 9.4* 13.6* 13.8* 1.2* 16.6* 16.9* 1* 7.6* 8.1* 8.1* 9.4* 13.6* 13.8* 1.2* 16.6* 16.9* 1* 7.6* 8.1* 8. 7.9 7.2 6.8 6. * 8.1* 9.2* 1.3* * 1.6* 1.9* 9.* *.3. 4.6 4.1 6.8* 7.2* 7.6* * * * 8.1* 8.4 8.3 8.3 7.4 7. * 8.1* 9.2* 1.3* * 1.6* 1.9* 9.* *.3. 4.6 6.8* 7.2* 7.6* * * * 3.7 3.7 * 6.* 2.8 2.8 3.8 2.3* 6.* * 4.2 4.1 2.3* 6.* *.2*.3*. 4.9* 4.2* 2.3* 6.* *.2*.3*.2.2 4.9* 4.2* 2.3* 7. 8.1 8.1 7.9 7.4 6.4 4.9 7. 8.1 8.1 7.9 7.4 6.4 4.9 4.2* 2.6 2. 2. 2.7 * 4.2* 3.7 2.7 2.8 * 4.2* 4.* 4.1* 4.2* 4.6 4.7* 4.2* * 4.2* 4.* 4.1* 4.2* 4.6* 4.7 4.7* 4.2* * 4.9 6.6 8.3 8.6 8.7 8. 7.9 7.1 4.9 6.6 8.3 8.6 8.7 8. 7.9 7.1 LC 9. 9. Stick LC with blade LC with blade LC Stick 2.3 9. 9. 7.4* 7.* 1* 13.8* 14. 1 1 12.8 9.8* 7.4* 7.* 1* 13.8* 14.7* 1 1 13.8 9.8* 7.4* 7.* 1* 13.8* 14.9* 16.4* 16.8* 16.2* 9.8* 7.4* 7.* 1* 13.8* 14.9* 16.4* 16.8* 16.2* 9.8* 7.1* * 8. 7.9 7.9 7.2 6.8 6. * 7.1* * 8.9* 1.1* * 1.6* 1.8* 1.1* *.3 4.7 4.1 * 6.6* 7.* * * * 6.2* 7.1* * 8.4 8.3 8.2 7.4 7. * 7.1* * 8.9* 1.1* * 1.6* 1.8* 1.1* * * 4.7 * 6.6* 7.* * * * 6.2* *.2* 3.8 3.7 3.6 *.2* * 3.7 2.8 2.6 2.7 2.8* * 3.8 2.8* * 4.6* 4.6* 4.7 4.2* 2.8* * 4.6* 4.6* 4.9 4.2* 2.8* 4.4 6.3 7.4 8. 8.3 8.4 8.2 6.8.3 4.4 6.3 7.4 8. 8.3 8.4 8.2 6.8.3 LC with blade LC Stick 9. 9. Height 6.4* 12.4* 1* 1* 13.7 1 12.8 11.6* 6.4* 12.4* 1* 14.7* 16.1* 16.7* 16.* 11.6* 6.4* 12.4* 1* 14.6 14.7 14. 13.7 11.6* 6.4* 12.4* 1* 14.7* 16.1* 16.7* 16.* 11.6* * 6.4* 7.* 8.1 7.9 7.3 6.9 6. 6.4 * 6.4* 7.* 8. 8.2 8.2 7.4 7.1 6.* * 6.4* 7.* 8.6* 9.8* 1.4* * 1.7* * 6.* * 6.4* 7.* 8.6* 9.8* 1.4* * 1.7* * 6.* 4.4 4.1 * 6.4* 6.8* 7.3* 7.9* 6.8* 3.6 3.6 4.6* * * 4.7 * 6.4* 6.8* 7.3* 7.9* 6.8* 3.8 3.6 4.6* * * Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The load alues are quoted in tons (t) at stick end (without bucket), and a be swung 36 on fir and een ground. Adjacent alues are alid for the undercarriage when in the longitudinal position. Capacities are alid for 6 wide track pads with adjusting clinder in optial position. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit (indicated ia *). Without bucket clinder, link and leer the lift capacities will increase b 28 kg. Lifting capacit of the excaator is liited b achine stabilit and hdraulic capacit. According to European Standard, EN 474-: In the European Union excaators hae to be equipped with an oerload warning deice, a load diagra and autoatic safet check ales on hoist clinders and stick clinder(s), when the are used for lifting operations which require the use of lifting accessories. R 926 Copact Litronic 23
Backhoe Bucket with Mono Boo Offset and Counterweight t ft 3 12 R476 11 with quick coupler Stick length Max. digging depth Max. reach at ground leel Max. duping height Max. teeth height 1 with stick 2.3 2 with stick 3 with stick at ax. attachent offset with ertical ditch walls 1 3 9 8 2 7 2 6 1 4 1 3 2 Digging Enelope without quick coupler Max. digging force (ISO 61) Max. breakout force (ISO 61) Max. digging force (SAE J1179) Max. breakout force (SAE J1179) -1-1 -2 2 3-3 -1 4 with stick 2.3 with stick 6 with stick with set straight boo Forces 1 4 6 2,3 2,6 2,9 6,2 6, 6,8 9,2 9,4 9,7 7,8 8, 8,2 1,8 11, 11,2 kn kn kn kn 4 12 14 113 12 11 14 1 12 6 12 14 97 12-4 -1 Operating Weight and Ground Pressure - -6-2 4-7 -2-8 11 1 9 3 7 2 6 2 4 1 3 1 The operating weight includes the basic achine with counterweight t, ono boo offset, stick, quick coupler SWA 48 and bucket.8 3 (63 kg). 2 1 ft 24 3 8 6 LC Pad width 6 7 7 8 9 Weight kg 26,2 26,7 26,9 27, 27, Ground pressure kg/c2.2.4.43.4.36 24 LC with blade Pad width 6 7 7 8 9 Weight kg 28, 28, 28,7 28,8 29,2 2 Ground pressure kg/c.6.49.46.43.39 3º Weight4) Weight 3) Capacit ISO 741 Cutting width Buckets Machine stabilit per ISO 167* (7 % of tipping capacit) LC- (with track pads 6 ) LC- with blade (with track pads 6 ) Stick length () without quick coupler with quick coupler 2.3 2.3 Stick length () without quick coupler with quick coupler 2.3 2.3 HD2) STD1) 3 kg kg 6. 48 1 8.6 2 1,.8 6 63 1,2 1. 68 71 1,4 1.1 7 78 1,2 1.2 89 92 1,4 1.3 8 88 1,4 9 98 6. 4 7 8.6 8 61 1,.8 67 7 1,2 1. 77 8 1,4 1.1 8 88 1,2 1.2 97 1, 1,4 1.3 93 96 1,4 1,9 1,12 * Indicated loads are based on ISO 167, at axiu reach, and a be swung 36 on fir and een ground 1) Standard bucket with teeth Uni 3-3 2) HD bucket with teeth Uni 3-3 3) Bucket for direct ounting 4) Bucket for ounting to quick coupler Other buckets aailable upon request Max. aterial weight = 2. t/3, = 1.8 t/3, = 1.6 t/3, = t/3, = 1.2 t/3 24 R 926 Copact Litronic
Lift Capacities with Mono Boo Offset, Counterweight t and Track Pads 6 * * 8.* 8.* 9.* 9.* 12.3* 12.3* 11.* 11.* 8.6* 8.6* * * 8.* 8.* 9.* 9.* 12.3* 12.3* 11.* 11.* 8.6* 8.6* 6.9* 6.9* 7.3* 7.3* 8.3* 6.7 9.6* 6.1 1.3* 1.* 9.* 7.1*. 4.4 4.1 4. 6.3* 6.7* 7.2* 7.6* 7.4 6.9*.2* 6.9* 6.9* 7.3* 7.3* 8. 8.3* 7.2 9.6* 6.6 1.3* 6.4 1.* 6.4 9.* 6. 7.1* 4.4 6.3* 6.7* 7.2* 7.6* * 6.9*.2* 7.* * 4.1 2.8 4. 3.6* 7.* * 4.4 3.6 4.4 3.6* 7.* * * *.3.3 *.2* 3.6* 7.* * * *.2 *.2* 3.6* 6.7 7.4 7.6 7. 6.7 7.4 7.6 7. * 4.4* 3.6 2.7 2.6 2.6 2.8 * * 4.4* 2.8 2.8 3.7 * * 4.4* 4.2* * * 4.6 4.7.2 * * * 4.4* 4.2* * * 4.7.3* * * 4.4 6.2 7.3 8. 8.3 8.4 8.1 7.6 6.7.2 4.4 6.2 7.3 8. 8.3 8.4 8.1 7.6 6.7.2 LC 9. 9. Stick LC with blade LC with blade LC Stick 2.3 9. 9. 7.1* 7.1* 7.4* 7.4* 1* 1* * * 1.7* 1.7* 9.* 9.* * * 7.1* 7.1* 7.4* 7.4* 1* 1* * * 1.7* 1.7* 9.* 9.* * * 6.* 6.* 6.9* 6.9* 8.* 6.8 9.4* 6.2 1.2* 1.1* 9.2* 7.6* 4.4* 4.4* 4.2 4. 6.1* 6.* 7.1* * 7.4 7.* * 6.* 6.* 6.9* 6.9* 8.* 8.* 7.3 9.4* 6.7 1.2* 6.4 1.1* 6.3 9.2* 6.4 7.6* 4.4* 4.4*.2 4.2 6.1* 6.* 7.1* * * 7.* * * 3.6 * *.* 2.8 2.7 2.7 3.7 4.1* *.* 4.2 4. 4.1* *.* 4.9. * * 4.1* *.* *. * * 4.1* 3.8 7. 8. 8.1 7.9 7.3 6.4 3.8 7. 8. 8.1 7.9 7.3 6.4 LC with blade LC Stick 9. 9. Height 6.3* 6.3* 1.6* 1.6* 6.1* 6.1* 1.2* 1.2* 1.4* 1.4* 6.6* 6.6* 6.3* 6.3* 1.6* 1.6* 6.1* 6.1* 1.2* 1.2* 1.4* 1.4* 6.6* 6.6* 6.1* 6.1* 6.* 6.* 7.6* 7.6* 7. 9.1* 6.2 1.1* 1.2* 9.* 8.*.2*.2*.*.2 4.9 4.2 3.8.* * 6.3* 6.9* 7.4* 7.4 7.1* * 6.1* 6.1* 6.* 6.* 7.6* 7.6* 9.1* 6.7 1.1* 6.4 1.2* 6.3 9.* 6.4 8.*.2*.2*.*.3 4.9 4.2 4.2.* * 6.3* 6.9* 7.4* * 7.1* * Can be slewed through 36 *.3.3 3.6 * * * In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The load alues are quoted in tons (t) at stick end (without bucket), and a be swung 36 on fir and een ground. Adjacent alues are alid for the undercarriage when in the longitudinal position. Capacities are alid for 6 wide track pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit (indicated ia *). Without bucket c linder, link and leer the lift capacities will increase b 28 kg. Lifting capacit of the excaator is liited b achine stabilit and hdraulic capacit. According to European Standard, EN 474-: In the European Union excaators hae to be equipped with an oerload warning deice, a load diagra and autoatic safet check ales on hoist clinders and stick clinder(s), when the are used for lifting operations which require the use of lifting accessories. R 926 Copact Litronic 2
Aailable Tools Rigid Ditch Cleaning Bucket GRL 9, for direct ounting Cutting width Capacit 3 Weight kg GRL 9, for ounting to quick coupler SWA 48 Cutting width Capacit 3 Weight kg R338 1,. 4 2,.4 41 2,.7 6 2,1.8 28 1,. 43 2,.7 2 2, 1.2 64 2,4.8 61 2,4.8 86 Ditch Cleaning Bucket GRL 9, 2 x tiltable, for direct ounting Cutting width 1,6 1,6 Capacit 3..8 Weight kg 6 79 GRL 9, 2 x tiltable, for ounting to quick coupler SWA 48 Cutting width 1,6 2, Capacit 3.8. Weight kg 8 69 R337 2,. 61 2,.7 8 2, 1. 87 2,2.8 8 2,4.8 87 2, 1. 94 2,2 1.1 98 2,2 1.4 1, 2,2 1.4 1, 2,4 1.2 1, Tilt Bucket R339 SL 9, 2 x tiltable, for direct ounting Cutting width 1, Capacit 3 1.2 Weight kg Weight in HD-ersion kg 87 SL 9, 2 x tiltable, for ounting to quick coupler SWA 48 Cutting width 1, Capacit 3 1.2 Weight kg Weight in HD-ersion kg 97 1,6.8 7 1,6 1. 81 1,6.8 82 1,6 1. 89 1,6 1.3 97 1,6 1,12 GM 1B, earthoing shell, for ounting to quick coupler SWA 48 Cutting width 32 4 Capacit 3.17.22 Weight kg 77 7 6.3 86 8.4 91 1,.6 97 Sorting Grab perforated Clashells H1287 H1121 ribbed SG 2, for ounting to quick coupler SWA 48 Cutting width 8 Capacit 3. Weight kg 1,1 Tiltrotator LH-TR 2, for ounting to quick coupler SWA 48 Weight kg 72 Rotation 36 Tilt 2 x 26 R 926 Copact Litronic 1,.6 1,18 8. 1, stone tong 1,.7 1,1 8. 1,24
Standard Equipent Chain guide 1 piece Lashing eelets Sprocket with dirt ejector Track rollers, lifetie-lubricated Tracks, sealed and greased Trael gear (B6) Uppercarriage Engine hood with gas spring opening Handrail Manual ain switch Non slip surfaces Serice doors, lockable Sound insulation Swing brake lock, aintenance-free Swing drie oil tank Tool set 29 pieces Hdraulic Sste Filter with integrated fine filter area Liebherr hdraulic oil Magnetic rod Positie Control sste with 2 independent circuits Pressure storage for controlled lowering of equipent with engine turned off Pressure test ports for hdraulic Shut-off ale between hdraulic tank and pups Work ode selector Engine Coon-Rail injection sste Confor with stage I / Tier 4 Final eission standard DOC / SCR exhaust gas after-treatent sste Engine idling / engine speed increase, autoatic, proxiit sensor-controlled Fixed geoetr turbo charger Fuel fine filter Fuel pre-filter and water separator Intercooler Stepless adjustable engine speed Operator s Cab 7" colour ultifunction displa with touchscreen Air conditioning, autoatic, positie pressure entilation Air filter box cabin accessible fro the ground Cigarette lighter Coat hook Cup holder Eergenc haer Engine oil leel onitoring on touchscreen Fuel and AdBlue consuption and leel indicators on touchscreen Headlights on cab, front, halogen, 2 pieces Hdraulic suspension Ipact-resistant roof window Interior light LiDAT Mechanical hour eters, readable fro outside the cab and fro the ground Operator seat Cofort with longitudinal and ertical daping Preparation for radio installation Rain hood oer front window opening Rear iew onitoring caera Rear window eergenc exit Reariew irror Retractable seat belt 1 Right hand side iew onitoring caera Right window and windshield with lainated safet glass Roll-down sun blinds (front and roof windows) ROPS safet cab structure (ISO 12117-2) Rubber floor at Sliding windows in cab door Storage bin Storage nets Storage spaces Tiltable console left Tinted windows Windscreen, totall or partiall retractable Wiper / washer Attachent Boo clinders oil regeneration Headlight on boo, right, halogen, 1 piece Liebherr central lubrication sste, full-autoatic (except connecting link for bucket kineatics) Load ale for hoist clinders (on distributor) Load ale for stick clinder (on distributor) Stick clinder oil regeneration Non-exhaustie list, please contact us for further inforation. R 926 Copact Litronic 27
Options Uppercarriage Additional headlights on uppercarriage, front, halogen or LED, 2 pieces, protections included Aber beacons on counterweight, LED, 2 pieces Botto protection for uppercarriage Cab walkwa, foldable Electric socket on uppercarriage (24 ) Extended tool set 4 pieces (incl. tool box) Fine filter protection grid for radiator Fuel anti-theft deice Pre-heating sste for fuel (24 ) Preparation for achine guidance sste Refuelling pup (electrical) Reersible fan drie Special painting Hdraulic Sste Bpass filter for hdraulic oil Filter for hdraulic haer return flow Liebherr hdraulic oil, adapted for extree cliate conditions Liebherr hdraulic oil, biodegradable Engine Air pre-filter with cclonic dust trap Autoatic engine shut-down after idling Engine shut-down self-tier Particle filter Operator s Cab 4-points seat belt Acoustic trael alar Additional headlights cab, front and / or rear, halogen or LED, 2 pieces Adjustable intensit headlights (LED) Aber beacon on cabin Auxiliar heater prograable Botto windscreen wiper Cool box (12 ) Dark tinted windows Electronic iobilizer Eergenc stop button in cab Falling objects protection structure FOPS Operator s Cab Fire extinguisher First-aid box Follow e hoe headlights Footrest Front guard protection structure FGPS Front guard protection structure FGPS swielable Handrests Headlights on cab, front, LED, 2 pieces Ipact-resistant 1 piece windscreen Integral protection guard FGPS + FOPS Liebherr proportional control (ini-josticks 2 axis) Light rail on cab Operator seat Preiu with integrated entilation and low frequenc ibrations filtration Radio Cofort Bluetooth Retractable seat belt 76, orange colour Roof window wiper Seat belt indicator Skiew 36 Special painting Sun isor Sunshield on cab roof Switchable high-pressure control Windscreen botto protection guard Attachent Additional headlight on boo, left, halogen or LED, 1 piece Autoatic lubrication sste for connecting link Botto protection for stick Eelet on stick Floating boo Headlight on boo, right, LED, 1 piece Headlights protection High pressure circuit Hoist clinder stroke liitation, adjustable Hdraulic circuit for grapple Leak return line for tools Liebherr bucket range Liebherr quick coupler SWA 48, hdraulic or echanical Liebherr tooth sste LIKUFIX for quick coupler SWA 48 Load holding ale for bucket clinder Lubricant hoses protection on stick Mediu pressure circuit Mono boo Mono boo offset Oerload warning deice Preparation for weighing sste Protection for piston rod, adjusting clinder Protection for piston rod, bucket clinder Safet check ales for hoist clinder Safet check ales for stick clinder Securit for hoist clinders Special painting Stick 2.3 Stick Stick Stick clinder stroke liitation, adjustable Tool Control, 1 tool adjustents selectable oer the displa Tool Manageent, autoatic tool recognition (in cobination with LIKUFIX) Two-piece boo Non-exhaustie list, please contact us for further inforation. Options and / or special attachents, supplied b endors other than Liebherr, are onl to be installed with the knowledge and approal of Liebherr in order to retain warrant. Liebherr-France SAS 2 aenue Joseph Re, B.P. 9287, FR-68 Colar Cedex S +33 389 21 3 3, Fax +33 389 21 37 93 www.liebherr.co, E-Mail: info.lfr@liebherr.co www.facebook.co/liebherrconstruction Printed in Geran b Eberl RG-BK LFR/SP-12233131-1-1.18_enGB All illustrations and data a differ fro standard equipent. Subject to change without notice. All indicated loads are based in accordance with ISO 9248. Chain guide 3 pieces Dozer blade Drawbar pull increase Lockable storage copartent Reinforced coer and base plate for undercarriage centre section Rubber track pads Special painting Steps, wide ersion Track pads triple grouser 6 Track pads triple grouser 7 Track pads triple grouser 7 Track pads triple grouser 8 Track pads triple grouser 9 Trael gear, reinforced (D6C)