Trunnion Mounted Ball Valve MANUAL CONTENTS

Trunnion Mounted Ball Valve MANUAL CONTENTS

M&J Valve was founded in 1962 by Marvin Grove and has been a leader in the pipeline valve industry since its inception. Now part of SPX FLOW, Inc., the M&J Valve brand meets or exceeds the quality standards of our customers and the valve industry. M&J Valve product offering includes slab and expanding through-conduit gate valves, axial surge valves and rotary control valves, piston, ball, and swing check valves. With the M&J Valve brand, SPX FLOW can provide a wide variety of flow control solutions for liquid and gas markets. This combination of products, technical know-how and field experience has allowed for a history of product innovation which has positioned the M&J Valve brand in a leadership position within the valve industry. Finding innovative ways to help the world meet its ever growing demand for energy is a key focus for SPX FLOW. As a multi industry company, we provide creative solutions that serve global energy markets in a myriad of ways. SPX FLOW is helping to meet that demand with a broad range of high quality, custom-engineered systems and components that can also help improve efficiency and reduce the use of natural resources. We also supply a wide range of components from air preheaters to filter systems. SPX FLOW off-the-shelf and customized solutions are supporting all phases of oil, gas and biofuel production, from exploration, extraction and processing to transport and storage. SPX FLOW Trunnion Mounted Ball Valve SPX FLOW, Inc. offers both a two piece and a three piece bolted body design trunnion mounted ball valve with either an external or internal trunnion bearing. This ball valve provides an attractive and cost effective solution for bubble-tight shut off requirements in many oil and gas applications. PRODUCT BENEFITS AND FEATURES: Two and Three Piece Bolted Body The SPX FLOW ball valve offers both a two piece and a three piece bolted body design. The external and internal trunnion bearings reduce the sealing forces and associated high torque, as well as the seat wear of floating ball valve designs. Trunnion Mounted Ball The trunnions are precisely fitted to the ball and TFE lined bearing connected to the body. The bearings absorb the side load generated by pressure acting on the ball. This design feature provides consistent torque and the exact location and support of the ball. Double Block and Bleed The valve possesses double block and bleed capability where the body cavity can be vented with the ball in the fully open or closed position. Vent fittings in the upper body and a combination vent / drain fitting in the bottom of the body provides this functionality. Positive Stem Sealing Using Multiple Seals The SPX FLOW ball valve standard stem seal design uses three seals to ensure a positive seal. The primary stem seal is fire-safe graphite packing. Additionally, two additional elastomer o-ring seals above the primary seal are used. Emergency Seat Sealant Injection Under standard operating conditions the SPX FLOW ball valve does not require any lubrication or routine maintenance. However, in the event the seat seal is damaged during operation, an emergency sealant injection system is provided as a standard on all valves. Sealant can be injected directly to the seat sealing area to effect a temporary emergency seal. Anti-static Continuity for all Components The SPX FLOW ball valve is designed to provide electrical continuity of all valve components to prevent the buildup of a static charge on internal components. Electrical continuity between parts such as the body and ball is ensured using springs. Meets API 6D The through conduit full bore API 6D design assures unrestricted flow and allows both pigging and hot tapping (full bore valves only). 2

Theory of Operation The SPX FLOW ball valve provides both a cast body 2-piece design and a forged body 3-piece design (in class 600 and higher pressures) bolted body trunnion mounted design for those hydrocarbon gas and liquid applications requiring bubble-tight shutoff, fire-safe construction and API 6D certification. Standard features include a positively retained stem, double block and bleed capability, anti-static design, and a standard seat sealant vent and drain feature. The SPX FLOW ball valve is designed to provide ease of operation, low torque, and extended seal life and is available in both full and reduced bore design. The through conduit full bore API 6D design assures unrestricted flow and accommodates both pigging and hot tapping. All SPX FLOW ball valves are bi-directional and may be installed for flow in either direction. They are intended for use in horizontal or vertical pipelines with the valve stem in any configuration. The trunnion mounted design maintains the ball in an exact, fixed position supported by the trunnions. Bearings absorb the side load created by pressure acting on the ball. The seat rings float in the seat pocket and sealing force is generated both by springs and line pressure. The valve has double block and bleed capability in both open and closed position. Cycle tested under the most severe conditions to provide long service life under the toughest conditions, in both high and low and varying pressure and flow conditions. Typical product applications OIL AND GAS PRODUCTION Pressure Control Water Injection Cavern Storage Separator Isolation Off-Shore Platforms GAS GATHERING, GAS PLANTS, GAS TRANSMISSION Metering & Regulating Stations Temperature, Pressure and Flow Control Launcher/Receiver Natural Gas Pipelines Emergency Shut Down Compressor Stations TERMINALS, STORAGE AND DOWNSTREAM CONVERSION Gas Storage Facilities LNG Liquefaction and Gasification Facilities Power Plant Gas Supply LDC Interconnects 3

Product Specifications SEAT SEALING FEATURES This seat design provides excellent sealing capability at both high and low differential pressures. The springs are used to provide an additional mechanical load to energize the seats under low pressure. Wave springs are used in valve sizes 2" through 4" Class 150 & 300 also 2" Class 900 & 1500 while coil springs are used in all other sizes and pressure classes. For low pressure service the springs provide a uniform mechanical force exerted around the entire sealing surface of the seats as they are pressed against the ball. Coil springs are closely spaced around the seat ring in a special groove that allows compression of the springs. These springs are kept evenly spaced by a specially designed stainless steel band which also helps to protect the springs during installation and maintenance. Even spacing of the springs provides a uniform load of the seats on the ball. Fluid and pressure are prevented from leaking past the seat ring by tail O-Ring seals. This tail O-Ring also acts as a piston seal allowing the seat ring to become pressure energized. EMERGENCY SEAT SEAL Under standard operating conditions the M&J ball valve does not require any lubrication or routine maintenance. However, in the event the seat seal is damaged during operation, an emergency sealant injection system is standard on all valves. Sealant can be injected directly to the seat sealing area to affect a temporary emergency seal. If valves are to be buried, or are located in an inaccessible location, the grease sealant fittings can be extended per customer requirements. Sealant Injection Body Seat Holder Spring Sealant Injection Body Seat Holder O-Ring Seat Holder Sealant Injection Fitting Figure 1 Figure 2 Seat Holder O-Ring Seat Ball Spring Seat Ball Body Cap Seat Holder Ball Seat Figure 3 4

ANTI-BLOWOUT STEM DESIGN AND STEM SEAL A positively retained anti-blowout stem is standard on all SPX FLOW ball valves. This feature allows the top works to be removed with the valve under pressure. The standard stem seal design utilizes three seals to ensure stem seal integrity. The primary seal is a backseated design using reinforced TFE. This seal is combined with a secondary inner seal and an externally replaceable outer seal. A port with a check fitting is provided between the inner and outer seals. This port allows seal integrity testing and venting prior to outer seal removal and replacement. TRUNNION DESIGN The M&J ball valve is a trunnion mounted design. The trunnions are fitted into TFE lined bearing blocks supported within the valve body. The trunnions are an integral part of the ball and precisely locate and support the ball while ensuring low, consistent torque. DOUBLE BLOCK AND BLEED FEATURE The M&J ball valve is designed to allow for double block and bleed. The body cavity can be vented with the ball in either the full-open or full-closed position. This is possible with pressure on either or both the upstream or downstream sides of the valve. The valve body is furnished with a vent fitting located in the upper half of the body center section. There is a pipe plug in the bottom of the body for draining. FIRE TEST QUALIFICATIONS The SPX FLOW ball valve has been designed to comply with international standards. This includes fire testing per ISO 10497. Fire test qualified design and certification can be provided when specified. VALVE BODY PRESSURE RELIEF When the SPX FLOW ball valve is in service, the flow media can be isolated and contained within the body cavity when the valve is closed. During this time, the flow media can expand and contract due to temperature variations. Thus, as the temperature rises, the fluid expands, increasing the pressure in the body cavity. In order to avoid over-pressuring the body cavity, the M&J ball valve seats are designed to self relieve the over-pressure, allowing the flow media to vent through the seat into the pipeline. This self-relieving feature is standard on all M&J ball valves. VALVE END CONNECTIONS The SPX FLOW ball valve can be supplied with a variety of end connections including RTJ and Raised Face flanged end, weld end, or flanged by weld end. Standard face to face dimensions are per API-6D. End flanges are supplied to meet B16.5, B16.47 Type A, or MSS- SP44 depending on valve size. SPX FLOW ball valves standard weld end on carbon steel body valves made from either A216 WCB or ASTM A105 having a specified minimum yield strength (SMYS) of 36,000 psi. This material can be field welded and matches the material of most common flanges. The standard weld preparation is bored to match the specified mating pipe. The bevel thickness is 1.5 times the mating pipe thickness allowing direct welding to mating pipe having a SMYS of 52,000 psi or less. Welding to higher strength pipe may require transition pieces (pups) or a change in specification of the valve end material. Consult SPX FLOW for special end connections on M&J Valve products including flanges and weld ends to match your requirements. 5

Service Information SPARE PARTS While the SPX FLOW ball valve is designed to provide trouble free service, we recommend that spare parts be inventoried in operations having numerous valves of a given size for customers having an in-house maintenance program. Having spare parts on site will help to reduce downtime and maintain valves so that they provide years of service. For those customers without in-house service capabilities, spare parts and factory service RECOMMENDED SPARE PARTS NUMBER OF SIMILAR VALVES TO BE SUPPORTED PART <10 11-20 21-30 31-40 Ball 0 1 2 3 Seat Assembly 0 2 4 6 Stem 0 1 2 3 O-Rings 1 set 2 sets 4 sets 6 sets Coil 0 2 sets 4 sets 6 sets Gear Box 0 0 1 1 Vent Fitting 1 1 2 2 Thrust Washer 2 4 4 6 Bearing 2 2 4 4 personnel can be obtained directly from the factory. Please provide the valve serial number when contacting SPX FLOW. The serial number can be found on the nameplate and is also stamped on the valve body, Identifying the serial number will expedite any request and ensure that correct information is provided. Warranty SPX FLOW warrants all original M&J Valve equipment to be free from defects in workmanship and material, provided that such equipment was properly selected for the service intended, properly installed, and not misused. M&J Valve equipment which is returned transportation prepaid within 12 months from date of installation or 18 months from date of shipment, whichever expires first and if found by SPX FLOW's inspection to be defective in workmanship or material will be repaired or replaced, at SPX FLOW s option, free of charge and return-shipped lowest cost transportation prepaid. NOTE: With exception to the warranty set forth above, SPX FLOW makes no express or implied warranties, no warranty of merchantability, no warranty of fitness of purpose, and no other warranties which extend beyond the description on the face hereof. NAMEPLATE Nameplates on SPX FLOW and M&J ball valves provide all of the information necessary to identify the valve when contacting the factory for assistance or spare parts. 6

Cut-Away View 2-PIECE BALL VALVE TRUNNION-MOUNTED 22 24 21 14 59 32 09 52 13 30 10 07 05 44 54 08 04 34 03 09 11 2 05 06 33 42 1 06 53 38 33 35 34 36 27 ITEM NO. PART MATERIAL 1 Body A216-WCB 2 Cap A216-WCB 3 Ball A351-CF8 4 Stem A276-304 5 Body O-Ring HNBR 6 Seat RTFM 7 Stem O-Ring HNBR 8 Stem Bush DU-BEARING 9 Back Seat RTFE 10 Packing GRAPHITE 11 Body/Cap Bolt A193-B7M 12 Body/Cap Nut A194-2HM 13 Gland A276-304 14 Gland Bolt A4135+H1150 20 Antistatic Device 316L SS 21 Gear Box C.S 22 Gear Box Bolt A193-B7M 24 Key A1045 ITEM NO. PART MATERIAL 27 Body Gasket GRAPHITE 30 Gland Bush RTFE 32 Housing A276-304 33 Trunnion A276-304 34 Trunnion Gasket 304SS+GRAPHITE 35 Trunnion Bush DU-BEARING (CS+PTFE) 36 Trunnion O-Ring HNBR 38 Trunnion Bolt A193-B7M 40 Seat Holder A351-CF8 41 Seat Holder O-Ring HNBR 42 Seat Holder O-Ring HNBR 44 Spring INCONEL X-750 52 Vent A1020+Zn. 53 Drain A1020+Zn. 54 Seal Injection A1020+Zn. 55 Support Leg C.S 59 Housing O-Ring HNBR 7

Cut-Away View 3-PIECE BALL VALVE TRUNNION-MOUNTED ITEM NO. PART MATERIAL 1 Body A105N 2 Cap A105N 3 Ball A351-CF8 4 Stem A276-304 A182-304 5 Body O-Ring HNBR 6 Seat DEVLON 7 Stem O-Ring HNBR 8 Stem Bush DU BEARING (CS+PTFE) 9 Back Seat RTFE 10 Packing GRAPHITE 11 Body/Cap Bolt A193-B7M 12 Body/Cap Nut A194-2HM 13 Gland A1045 14 Gland Bolt A4135+H1150 20 Anti-Static 316L SS 21 Gear Box CS 22 Gear Box Bolt A193-B7M 23 Gear Box Nut A194-2HM 24 Key A1045 27 Body Gasket GRAPHITE ITEM NO. PART MATERIAL 28 Gland O-Ring HNBR 29 Gland Gasket GRAPHITE 30 Gland Bush DU BEARING (CS+PTFE) 31 Gland Pin A1045 40 Seat Holder A351-CF8 41 Seat Holder O-Ring HNBR 43 Seat Holder Gasket GRAPHITE 44 Spring X-750 45 Bearing Plate A1045 56 Bearing Plate Bush DU BEARING (CS+PTFE) 47 Bearing Plate Liner RTFE 48 Bearing Plate Pin A1045 49 Mounting Plate A1045 50 Mounting Plate Bolt A4135+ H1150 51 Mounting Plate Pin A1045 52 Vent A1020+Zn. 53 Drain A1020+Zn. 54 Sealant Injection A1020+Zn. 55 Sporting Leg CS 56 Lifting Lug CS 8

Optional Materials PART CAST STAINLESS SOUR (NACE) CAST SOUR LOW TEMP (NACE) FORGED STAINLESS SOUR (NACE) FORGED SOUR LOW TEMP (NACE) Body A351-CF8M (316SS) A352-LCC A182-F316 A350-LF2 Cap A351-CF8M (316SS) A352-LCC A182-F316 A350-LF2 Ball A351-CF8M (316SS) A351-CF8 (304SS)* A351-CF8M (316SS) A351-CF8 (304SS)* Stem A276-316 / A182-316 A276-304 / A182-304* A276-316 / A182-316 A276-304 / A182-304* Stud Bolt/Nut A193-B8 / A193-B8 A193-B7M / A194-2HM A193-B8 / A193-B8 A320-L7M / A194-7M Body-Cap O-Ring HNBR HNBR HNBR HNBR Body-Cap Gasket Graphite Graphite Graphite Graphite Seat Holder A351-CF8M (316SS) A351-CF8 (304SS)* A351-CF8M (316SS) A351-CF8 (304SS)* Seat DEVLON DEVLON DEVLON DEVLON Seat Holder O-Ring- 1 HNBR HNBR HNBR HNBR Seat Holder O-Ring-2 HNBR HNBR HNBR HNBR Seat Holder Gasket Graphite Graphite Graphite Graphite Spring INCONEL X-750 INCONEL X-750 INCONEL X-750 INCONEL X-750 Bearing Plate Bush DU+PTFE DU+PTFE DU+PTFE DU+PTFE Anti-Static Ball & Spring ASTM A276-316L ASTM A276-316L ASTM A276-316L ASTM A276-316L Stem Bush DU+PTFE DU+PTFE DU+PTFE DU+PTFE Thrust Washer RTFE RTFE RTFE RTFE Stem O-Ring HNBR HNBR HNBR HNBR Packing Graphite Graphite Graphite Graphite Mounting Plate A351-CF8M (316SS) A352-LCC A351-CF8M / A182- F316 A350-LF2 Thrust Bearing RTFE RTFE RTFE RTFE Vent Plug 316SS A1020+Zn 316SS A1020+Zn Sealant Injection 316SS A1020+Zn (316SS Ball Check) 316SS A1020+Zn (316SS Ball Check) * A351-CF8M (316SS) is available 9

Trunnion Dimensional Data CLASS 150 SIZE Ød L-RF L-RTJ L-BW H WEIGHT In mm In mm In mm In mm In mm In mm Lbs. kg 2 50 2 50 7 178 7.5 190.5 8.5 216 4.4 113 39.6 18 3 2 80 50 2 51 8 203 8.5 216 11 283 4 113 57.2 26 3 80 3 76 8 203 8.5 216 11 283 8 195 88 40 4 3 100 80 3 76 9 229 9.5 241 12 305 8 195 132 60 4 100 4 100 9 229 9.5 241 12 305 8 208 176 80 6 4 150 100 4 102 16 394 16.0 406 18 457 8 208 275 125 6 150 6 150 16 394 16.0 406 18 457 11 283 352 160 8x6 200x150 6 152 18 457 18.5 470 20.5 521 9.8 250 462 210 8 200 8 200 18 457 18.5 470 20.5 521 11.0 280 556.6 253 10x8 250x200 8 203 21 533 21.5 546 22 559 11 280 726 330 10 250 10 250 21 533 21.5 546 22 559 13 340 851.4 387 12x10 300x250 10 254 24 610 24.5 622 25 635 13 340 1045 475 12 300 12 300 24 610 24.5 622 25 635 15 370 1232 560 14x12 350x300 12 303 27 686 27.5 699 30 762 15 370 1408 640 14 350 14 337 27 686 27.5 699 30 762 15 390 1672 760 16x14 400x350 14 337 30 762 30.5 775 33 838 15 390 2002 910 16 400 16 387 30 762 30.5 775 33 838 17 430 2200 1000 18x16 450x400 16 387 34 864 34.5 876 36 914 17 430 2420 1100 18 450 18 438 34 864 34.5 876 36 914 19 490 2673 1215 20x16 500x400 16 387 36 914 36.5 927 39 991 17 430 3256 1480 20 500 20 489 36 914 36.5 927 39 991 22 550 3850 1750 24x20 600x500 20 489 42 1067 42.5 1080 45 1143 22 550 5500 2500 24 600 24 589 42 1067 42.5 1080 45 1143 25 640 6798 3090 10

Trunnion Dimensional Data CLASS 300 SIZE Ød L-RF L-RTJ L-BW H WEIGHT In mm In mm In mm In mm In mm In mm Lbs. kg 2 50 2 50 8.5 216 9.1 232 8.5 216 4.3 110 46.2 21 3 2 80x50 2 51 11.1 283 9.1 232 11.1 283 4.3 110 68.2 31 3 80 3 76 11.1 283 11.7 298 11.1 283 6.5 165 105.6 48 4 3 100x80 3 76 12.0 305 11.7 298 12.0 305 6.5 165 154 70 4 100 4 100 12.0 305 12.6 321 12.0 305 8.3 210 198 90 6x4 150x100 4 102 15.9 403 12.6 321 18.0 457 8.3 210 297 135 6 150 6 150 15.9 403 16.5 419 18.0 457 9.8 250 396 180 8x6 200x150 6 152 19.8 502 20.4 518 20.5 521 9.8 250 528 240 8 200 8 200 19.8 502 20.4 518 20.5 521 11.0 280 594 270 10x8 250x200 8 203 22.4 568 23.0 584 22.0 559 11.0 280 946 430 10 250 10 250 22.4 568 23.0 584 22.0 559 13.4 340 1100 500 12x10 300x250 10 254 25.5 648 26.1 664 25.0 635 13.4 340 1342 610 12 300 12 300 25.5 648 26.1 664 25.0 635 14.6 370 1474 670 14x12 350x300 12 303 30.0 762 30.6 778 30.0 762 14.6 370 1760 800 14 350 14 337 30.0 762 30.6 778 30.0 762 15.4 390 2035 925 16x14 400x350 14 337 33.0 838 33.6 854 33.0 838 15.4 390 2420 1100 16 400 16 387 33.0 838 33.6 854 33.0 838 16.9 430 2750 1250 18x16 450x400 16 387 36.0 914 36.6 930 36.0 914 16.9 430 3080 1400 18 450 18 438 36.0 914 36.6 930 36.0 914 19.3 490 3498 1590 20x16 500x450 16 387 39.0 991 39.8 1010 39.0 991 16.9 430 3630 1650 20 500 20 489 39.0 991 39.8 1010 39.0 991 21.7 550 4840 2200 24x20 600x500 20 489 45.0 1143 45.9 1165 45.0 1143 21.7 550 6160 2800 24 600 24 589 45.0 1143 45.9 1165 45.0 1143 25.2 640 7480 3400 11

Trunnion Dimensional Data CLASS 600 SIZE Ød L-RF L-RTJ L-BW H WEIGHT In mm In mm In mm In mm In mm In mm Lbs. kg 2 50 2 50 11.5 292 11.6 295 11.5 292 4.3 110 68 31 3 2 80x50 2 51 14.0 356 14.1 359 14.0 356 4.3 110 86 39 3 80 3 76 14.0 356 14.1 359 14.0 356 6.5 165 132 60 4 3 100x80 3 76 17.0 432 17.1 435 17.0 432 6.5 165 165 75 4 100 4 100 17.0 432 17.1 435 17.0 432 8.3 210 242 110 6x4 150x100 4 102 22.0 559 22.1 562 22.0 559 8.3 210 330 150 6 150 6 150 22.0 559 22.1 562 22.0 559 9.8 250 550 250 8x6 200x150 6 152 26.0 660 26.1 664 26.0 660 9.8 250 638 290 8 200 8 200 26.0 660 26.1 664 26.0 660 11.3 288 1056 480 10x8 250x200 8 203 31.0 787 31.1 791 31.0 787 11.3 288 1210 550 10 250 10 250 31.0 787 31.1 791 31.0 787 13.5 343 1650 750 12x10 300x250 10 254 33.0 838 33.1 841 33.0 838 13.5 343 1760 800 12 300 12 300 33.0 838 33.1 841 33.0 838 14.9 378 2200 1000 14x12 350x300 12 303 35.0 889 35.1 892 35.0 889 14.9 378 2420 1100 14 350 14 337 35.0 889 35.1 892 35.0 889 15.5 394 2376 1080 16x14 400x350 14 337 39.0 991 39.1 994 39.0 991 15.5 394 2376 1080 16 400 16 387 39.0 991 39.1 994 39.0 991 17.3 440 3300 1500 18x16 450x400 16 387 43.0 1092 43.1 1095 43.0 1092 17.3 440 3630 1650 18 450 18 438 43.0 1092 43.1 1095 43.0 1092 19.7 500 4510 2050 20x16 500x450 16 387 47.0 1194 47.2 1200 47.0 1194 17.3 440 4576 2080 20 500 20 489 47.0 1194 47.2 1200 47.0 1194 21.7 551 5720 2600 24x20 600x500 20 489 55.0 1397 55.4 1406 55.0 1397 21.7 551 7040 3200 24 600 24 589 55.0 1397 55.4 1406 55.0 1397 25.2 640 10340 4700 12

Trunnion Dimensional Data CLASS 900 SIZE Ød L-RF L-RTJ L-BW H WEIGHT In mm In mm In mm In mm In mm In mm Lbs. kg 2 50 2 49 14.5 368 14.6 371 14.5 368 4.3 110 105.6 48 3 2 80x50 2 49 15.0 381 15.1 384 15.0 381 4.3 110 114.4 52 3 80 3 74 15.0 381 15.1 384 15.0 381 6.5 165 176 80 4 3 100x80 3 74 18.0 457 18.1 460 18.0 457 6.5 165 209 95 4 100 4 100 18.0 457 18.1 460 18.0 457 8.3 210 308 140 6x4 150x100 4 100 24.0 610 24.1 613 24.0 610 8.3 210 451 205 6 150 6 150 24.0 610 24.1 613 24.0 610 9.8 250 792 360 8x6 200x150 6 150 29.0 737 29.1 740 29.0 737 9.8 250 968 440 8 200 8 201 29.0 737 29.1 740 29.0 737 11.3 288 1276 580 10x8 250x200 8 201 33.0 838 33.1 841 33.0 838 11.3 288 1518 690 10 250 10 252 33.0 838 33.1 841 33.0 838 13.5 343 2200 1000 12x10 300x250 10 252 38.0 965 38.1 968 38.0 965 13.5 343 2530 1150 12 300 12 303 38.0 965 38.1 968 38.0 965 14.9 378 3300 1500 13

Trunnion Dimensional Data CLASS 1500 SIZE Ød L-RF L-RTJ L-BW H WEIGHT In mm In mm In mm In mm In mm In mm Lbs. kg 2 50 2 49 14.5 368 14.6 371 14.5 368 4.3 110 110 50 3 2 80x50 2 49 18.5 470 18.6 473 18.5 470 4.3 110 154 70 3 80 3 74 18.5 470 18.6 473 18.5 470 6.6 167 213.4 97 4 3 100x80 3 74 21.5 546 21.6 549 21.5 546 6.6 167 264 120 4 100 4 100 21.5 546 21.6 549 21.5 546 7.0 179 440 200 6x4 150x100 4 100 27.8 705 28.0 711 27.8 705 7.0 179 627 285 6 150 6 144 27.8 705 28.0 711 27.8 705 10.2 260 1056 480 8x6 200x150 6 144 32.8 832 33.1 841 32.8 832 10.2 260 1232 560 8 200 8 192 32.8 832 33.1 841 32.8 832 12.0 304 1804 820 10x8 250x200 8 192 39.0 991 39.4 1000 39.0 991 12.0 304 2244 1020 10 250 9 239 39.0 991 39.4 1000 39.0 991 14.3 363 3300 1500 12x10 300x250 9 239 44.5 1130 45.1 1146 44.5 1130 14.3 363 3850 1750 12 300 11 287 44.5 1130 45.1 1146 44.5 1130 16.4 417 4840 2200 14

Actuator Mounting Dimensions CLASS 150/300 Size Ød W T1 T2 L1 L2 L3 ØG ØC1 C2 ØD N1 * N H1 H2 In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm 2x2 0.79 20 0.55 14 0.08 2 0.35 9 0.55 14 0.75 19 0.69 17.5 3x2 0.79 20 0.55 14 0.08 2 0.35 9 0.55 14 0.75 19 0.69 17.5 3x3 1.18 30 0.79 20 0.08 2 0.71 18-1.18 30 1.00 25.5 4x3 1.18 30 0.79 20 0.08 2 0.71 18-1.18 30 1.00 25.5 4x4 1.18 30 0.79 20 0.08 2 0.71 18-1.18 30 1.00 25.5 6x4 1.18 30 0.79 20 0.08 2 0.71 18-1.18 30 1.00 25.5 CLASS 600 M8 M8 M12 M12 M8 M8 M8 M8 1.50 38 2.76 70 2.44 62 3.54 90 1.50 38 2.76 70 2.44 62 3.54 90 1.57 40 4.02 102 3.15 80 4.92 125 1.57 40 4.02 102 3.15 80 4.92 125 1.57 40 4.02 102 3.15 80 4.92 125 1.57 40 4.02 102 3.15 80 4.92 125 Size Ød W T1 T2 L1 L2 L3 ØG ØC1 C2 ØD N1 * N H1 H2 In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm 2x2 0.79 20 0.55 14 0.08 2 0.35 9 0.55 14 0.75 19 0.69 17.5 3x2 0.79 20 0.55 14 0.08 2 0.35 9 0.55 14 0.75 19 0.69 17.5 3x3 1.18 30 0.79 20 0.08 2 0.71 18-1.18 30 1.00 25.5 4x3 1.18 30 0.79 20 0.08 2 0.71 18-1.18 30 1.00 25.5 4x4 1.18 30 0.79 20 0.08 2 0.71 18-1.18 30 1.00 25.5 6x4 1.18 30 0.79 20 0.08 2 0.71 18-1.18 30 1.00 25.5 CLASS 900 M8 M8 M8 M8 1.50 38 4.02 102 3.90 99 4.92 125 1.50 38 4.02 102 3.90 99 4.92 125 1.57 40 4.02 102 3.15 80 4.92 125 1.57 40 4.02 102 3.15 80 4.92 125 1.57 40 4.02 102 3.15 80 4.92 125 1.57 40 4.02 102 3.15 80 4.92 125 Size Ød W T1 T2 L1 L2 L3 ØG ØC1 C2 ØD N1 * N H1 H2 In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm 2x2 1.18 30 0.79 20 0.08 2 0.35 9 0.00 0 0.77 19.5 0.47 12 3x2 0.79 20 0.55 14 0.08 2 0.35 9 0.00 0 0.77 19.5 0.47 12 3x3 1.18 30 0.79 20 0.08 2 0.71 18 0.00 0 0.77 19.5 0.47 12 4x3 1.18 30 0.79 20 0.08 2 0.71 18 0.00 0 0.77 19.5 0.47 12 1.69 43 4.02 102 3.90 99 4.92 125 1.69 43 4.02 102 3.90 99 4.92 125 1.69 43 4.02 102 3.90 99 4.92 125 1.69 43 4.02 102 3.90 99 4.92 125 15

Topworks Data CLASS 150 Size ØS H T1 T2 Key N D ØG ISO MTG ØC ØD In In mm In mm In mm In mm In mm In mm In mm In mm Flange In mm In mm 6x6 1.38 35 2.56 65 0.12 3 0.98 25 0.39x0.31 10 8 0.16 4 0.59 15 3.39 86 F12 4.92 125 6.89 175 8x6 1.38 35 2.56 65 0.12 3 0.98 25 0.39x0.31 10 8 0.16 4 0.59 15 3.39 86 F12 4.92 125 6.89 175 8x8 1.57 40 2.56 65 0.16 4 0.98 25 0.47x0.31 12 8 0.16 4 0.75 19 3.98 101 F14 5.51 140 6.89 175 10x8 1.57 40 2.56 65 0.16 4 0.98 25 0.47x0.31 12 8 0.16 4 0.75 19 3.98 101 F14 5.51 140 6.89 175 10x10 2.17 55 3.11 79 0.20 5 0.87 22 0.63x0.39 16 10 0.16 4 0.87 22 5.16 131 F16 6.50 165 8.27 210 12x10 2.17 55 3.11 79 0.20 5 0.87 22 0.63x0.39 16 10 0.16 4 0.87 22 5.16 131 F16 6.50 165 8.27 210 12x12 2.17 55 3.11 79 0.20 5 0.87 22 0.63x0.39 16 10 0.16 4 0.87 22 5.16 131 F16 6.50 165 8.27 210 14x12 2.17 55 3.11 79 0.20 5 0.87 22 0.63x0.39 16 10 0.16 4 0.87 22 5.16 131 F16 6.50 165 8.27 210 14x14 2.56 65 4.33 110 0.20 5 0.98 25 0.71x0.43 18 11 0.31 8 0.75 19 6.34 161 F20 8.07 205 10.04 255 16x12 2.17 55 3.11 79 0.20 5 0.87 22 0.63x0.39 16 10 0.16 4 0.87 22 5.16 131 F16 6.50 165 8.27 210 16x14 2.56 65 4.33 110 0.20 5 0.98 25 0.71x0.43 18 11 0.31 8 0.75 19 6.34 161 F20 8.07 205 10.04 255 16x16 2.76 70 4.53 115 0.20 5 1.06 27 0.79x0.47 20 12 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 18x18 3.15 80 4.53 115 0.20 5 1.06 27 0.87x0.55 22 14 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 20x16 2.76 70 4.53 115 0.20 5 1.06 27 0.79x0.47 20 12 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 20x18 3.15 80 4.53 115 0.20 5 1.06 27 0.87x0.55 22 14 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 20x20 3.35 85 4.92 125 0.20 5 1.18 30 0.98x0.55 25 14 0.31 8 0.87 22 9.09 231 F30 11.73 298 13.78 350 24x20 3.35 85 4.92 125 0.20 5 1.18 30 0.98x0.55 25 14 0.31 8 0.87 22 9.09 231 F30 11.73 298 13.78 350 24x24 3.94 100 5.12 130 0.20 5 1.38 35 1.10x0.63 28 16 0.31 8 0.87 22 9.09 231 F30 11.73 298 13.78 350 26x26 4.33 110 5.91 150 0.20 5 1.57 40 1.26x071 32 18 0.31 8 1.30 33 10.28 261 F35 14.02 356 16.34 415 30x24 3.94 100 5.12 130 0.20 5 1.38 35 1.10x0.63 28 16 0.31 8 0.87 22 9.09 231 F30 11.73 298 13.78 350 16

Topworks Data CLASS 300 Size ØS H T1 T2 Key N D ØG ISO MTG ØC ØD In In mm In mm In mm In mm In mm In mm In mm In mm Flange In mm In mm 6x6 1.57 40 2.95 75 0.16 4 0.98 25 0.47x0.31 12x8 0.16 4 0.75 19 3.98 101 F14 5.51 140 6.89 175 8x6 1.57 40 2.95 75 0.16 4 0.98 25 0.47x0.31 12x8 0.16 4 0.75 19 3.98 101 F14 5.51 140 6.89 175 8x8 1.57 40 2.95 75 0.20 5 0.98 25 0.47x0.31 12x8 0.16 4 0.87 22 5.16 131 F16 6.50 165 8.27 210 10x8 1.57 40 2.95 75 0.20 5 0.98 25 0.47x0.31 12x8 0.16 4 0.87 22 5.16 131 F16 6.50 165 8.27 210 10x10 2.17 55 3.11 79 0.20 5 0.91 23 0.63x0.39 16x10 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 12x10 2.17 55 3.11 79 0.20 5 0.91 23 0.63x0.39 16x10 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 12x12 2.17 55 3.11 79 0.20 5 0.91 23 0.63x0.39 16x10 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 14x12 2.17 55 3.11 79 0.20 5 0.91 23 0.63x0.39 16x10 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 14x14 2.56 65 4.33 110 0.20 5 0.98 25 0.71x0.43 18x11 0.31 8 0.75 19 6.34 161 F20 8.07 205 10.04 255 16x12 2.17 55 3.11 79 0.20 5 0.91 23 0.63x0.39 16x10 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 16x14 2.56 65 4.33 110 0.20 5 0.98 25 0.71x0.43 18x11 0.31 8 0.75 19 6.34 161 F20 8.07 205 10.04 255 16x16 2.76 70 4.53 115 0.20 5 1.06 27 0.79x0.43 20x11 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 18x18 3.15 80 4.53 115 0.20 5 1.06 27 0.87x0.55 22x14 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 20x16 2.76 70 4.53 115 0.20 5 1.06 27 0.79x0.47 20x12 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 20x18 3.15 80 4.53 115 0.20 5 1.06 27 0.87x0.55 22x14 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 20x20 3.35 85 4.92 125 0.20 5 1.18 30 0.98x0.55 25x14 0.31 8 0.87 22 9.09 231 F30 11.73 298 13.78 350 24x20 3.35 85 4.92 125 0.20 5 1.18 30 0.98x0.55 25x14 0.31 8 0.87 22 9.09 231 F30 11.73 298 13.78 350 24x24 3.94 100 5.12 130 0.20 5 1.38 35 1.10x0.63 28x16 0.31 8 0.87 22 9.09 231 F30 11.73 298 13.78 350 26x26 4.33 110 5.91 150 0.20 5 1.57 40 1.26x071 32x18 0.31 8 1.30 33 10.28 261 F35 14.02 356 16.34 415 30x24 3.94 100 5.12 130 0.20 5 1.38 35 1.10x0.63 28x16 0.31 8 0.87 22 9.09 231 F30 11.73 298 13.78 350 17

Topworks Data CLASS 600-900 Size ØS H T1 T2 Key N D ØG ISO MTG ØC ØD In In mm In mm In mm In mm In mm In mm In mm In mm Flange In mm In mm 6x6 1.77 45 3.15 80 0.16 4 1.18 30.47x.35 14x9 0.16 4 0.87 22 5.16 131 F16 6.50 165 8.27 210 8x6 1.77 45 3.15 80 0.16 4 1.18 30.47x.35 14x9 0.16 4 0.87 22 5.16 131 F16 6.50 165 8.27 210 8x8 2.36 60 3.15 80 0.20 5 1.18 30.71x.43 18x11 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 10x8 2.36 60 3.15 80 0.20 5 1.18 30.71x.43 18x11 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 10x10 2.95 75 3.74 95 0.20 5 1.18 30.79x.47 20x12 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 12x10 2.95 75 3.74 95 0.20 5 1.18 30.79x.47 20x12 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 12x12 2.95 75 4.13 105 0.20 5 1.18 30.79x.47 20x12 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 14x12 2.95 75 4.13 105 0.20 5 1.18 30.79x.47 20x12 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 14x14 2.95 75 4.33 110 0.20 5 1.18 30.79x.47 20x12 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 16x12 2.95 75 4.13 105 0.20 5 1.18 30.79x.47 20x12 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 16x14 2.95 75 4.33 110 0.20 5 1.18 30.79x.47 20x12 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 16x16 3.35 85 3.94 100 0.20 5 1.18 30.98x.55 25x14 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 18x18 3.54 90 4.72 120 0.20 5 1.18 30.98x.55 25x14 0.31 8 0.87 22 9.09 231 F30 11.73 298 13.78 350 20x16 3.35 85 3.94 100 0.20 5 1.18 30.98x.55 25x14 0.31 8 0.75 19 7.91 201 F25 10.00 254 11.81 300 20x18 3.54 90 4.72 120 0.20 5 1.18 30.98x.55 25x14 0.31 8 0.87 22 9.09 231 F30 11.73 298 13.78 350 20x20 3.94 100 6.69 170 0.20 5 1.18 30 1.10x.63 28x16 0.31 8 1.30 33 10.28 261 F35 14.02 356 16.34 415 24x20 3.94 100 6.69 170 0.20 5 1.18 30 1.10x.63 28x16 0.31 8 1.30 33 10.28 261 F35 14.02 356 16.34 415 24x24 4.33 110 6.69 170 0.20 5 1.38 35 1.26x.71 32x18 0.31 8 1.30 33 10.28 261 F35 14.02 356 16.34 415 26x26 4.72 120 7.09 180 0.20 5 1.57 40 1.26x.71 32x18 0.31 8 1.54 39 11.85 301 F40 15.98 406 18.70 475 30x30 5.12 130 7.87 200 0.20 5 1.77 45 1.42x.79 36x20 0.47 12 1.54 39 14.61 371 F48 19.02 483 22.05 560 30x24 4.33 110 6.69 170 0.20 5 1.38 35 1.26x.71 32x18 0.31 8 1.30 33 10.28 261 F35 14.02 356 16.34 415 CLASS 1500 Size ØS H T1 T2 Key N D ØG ISO MTG ØC ØD In In mm In mm In mm In mm In mm In mm In mm In mm Flange In mm In mm 2 1.10 28 1.77 45 0.12 3 0.79 20 0.31x0.28 8x7 0.16 4 0.55 14 3.39 86 F12 4.92 125 5.91 150 3 1.10 28 1.77 45 0.12 3 0.79 20 0.31x0.28 8x7 0.16 4 0.55 14 3.39 86 F12 4.92 125 5.91 150 4 1.38 35 2.17 55 0.12 3 0.79 20 0.39x0.31 10x8 0.16 4 0.55 14 3.39 86 F12 4.92 125 5.91 150 6 1.77 45 3.15 80 0.16 4 1.18 30 0.55x0.35 14x9 0.16 4 0.87 22 5.16 131 F16 6.50 165 8.27 210 8 2.36 60 3.15 80 0.20 5 1.18 30 0.71x0.43 18x11 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 10 2.95 75 3.74 95 0.20 5 1.18 30 0.79x0.47 20x12 0.31 8 0.75 19 6.34 161 F20 8.07 205 9.84 250 18

Torque Chart ASME CLASSES 150 1500 MOP TORQUE Ball Valve Torque Chart - Trunnion mounted ball valve. Torque and MAST in in-lb. Pressure in pounds per square inch. PRESSURE (PSIG) SIZE CLASS 150 CLASS 300 CLASS 600 CLASS 900 CLASS 1500 MAST MAST MAST MAST in mm (0psi) (285psi) (740psi) (1480psi) (2220psi) (3705psi) MAST 2 50 260 347 1736 738 1736 1302 1736 1823 3906 2777 3906 3 75 443 955 5989 1823 5989 2777 5989 3454 7985 4496 7985 4 100 868 1389 5989 2430 5989 5538 7291 7195 9461 10068 14148 6 150 2604 4600 14148 7291 14148 13019 20224 14755 20224 22133 27688 8 200 5208 6944 14148 12151 14148 16925 47825 26039 47825 39058 93479 10 250 6076 11197 36888 14755 36888 19529 93479 27775 93479 41662 113443 12 300 10416 13540 36888 21439 36888 28643 93479 50255 136096 14 350 15623 21699 47825 29164 47825 48606 93479 85581 221591 16 400 23435 29511 76033 42964 76033 56418 136096 100597 221591 18 450 32983 42096 113443 58153 113443 97646 221591 179147 486753 20 500 33851 44440 136096 80113 136096 102420 221591 177585 486753 24 600 38624 77249 189910 99816 189910 138874 294847 213258 675448 26 650 47738 118477 294847 190952 294847 320538 907454 461322 1292048 28 700 65097 133927 486753 213519 486753 342498 907454 508626 1292048 30 750 78117 149289 486753 231746 486753 403602 1292048 32 800 91136 169426 675448 254573 675448 422177 1292048 34 850 107627 174460 675448 279397 675448 453944 1292048 36 900 114571 196420 675448 294413 675448 487968 1292048 40 1000 134534 239297 907454 329131 907454 585267 1772378 42 1050 140176 253966 907454 368710 907454 603234 1772378 The above torque values do not contain service factors. Soaking effects and/or particle matter in the valve may cause an increase in the torque. For intermediate pressure use the torque expressions for the stated pressure range. The re-seat torque is taken as 0.75 times the break torque. (18 over 0.8 times) For power operation, multiply all of the above values by a factor of 1.25 or customer specified factor whichever is larger. For operating temperatures between -20 F to -50 F (-29 C to -46 C) multiply these values by 1.20. Actuator selection should be made on customer experience and appropriate service factors. 19

Ball Valve Model Number Key Valve Type Rating Seat Material Operator B Ball N Standard 15 ASME 150 P PTFE (TFM-1600) L Lever 30 ASME 300 R RPTFE (GLASS 15%) G Worm Gear 60 ASME 600 D DEVLON * B Bare Stem 90 ASME 900* K PEEK X Special 150 ASME 1500* T Metal+TungCarbide* 250 ASME 2500* X RTFM Glass+Graphite Operator Blank Import D Domestic* BN F38 60 IA D A R 8 G D Classification End Connection Size R2 Reduced Split Body 7 Floating ball- Graphite + O-Ring packing (Fire Safe) R3 Reduced Split Body(3P)* F2 Full Split Body F3 Full Split Body(3P) 8 Body & Trim Material A A351-CF8 B A351-CF8M F A216-WCB H A352-LCC I A105N* J A350-LF2* N A182-F316* O A182-F316L* P A182-F51* Trunnion mounted- O-Ring + Graphite packing (Fire Safe) Seals A Graphite+HNBR B Graphite+Viton GLT B Butt Weld F Flat Face R Raised Face J Ring Joint X Special 1 1(25) 2 2(50) 3 3(80) 4 4(100) 5 5(125) 6 6(150) 8 8(200) 10 10(250) 12 12(300)* 14 14(350)* 16 16(400)* 18 18(450)* 20 20(500)* 22 22(550)* 24 24(600)* 26 26(650)* 28 28(700)* 30 30(750)* 32 32(800)* 34 34(850)* 36 36(900)* 40 40(1000)* 46 46(1150)* * Denotes only available in Trunnion Ball Valves. FOR EXAMPLE BN-F38-60IA-DAR-8GD 8" API 6D Monogrammed NACE MR0175 Compliant, 3-Pc End Entry Trunnion Ball Valve, Full Port, Class 600, A105N CS Body, 304 Trim, Devlon Seat, HNBR Seals, RFF, Gear, Domestic 20

Pressure / Temperature Rating F C 21

Other M&J Valve Branded Products EXPANDING GATE VALVES The M&J Model EG valves are full-bore through-conduit valves with rising stem, parallel expanding gate and segment for tight mechanical seal and positive shut-off, both upstream and downstream, under both low and high differential pressure. This valve provides a superior bidirectional mechanical seal because the two-piece gate assembly expands against the seating areas in open or closed position. The greater the torque, the tighter the seal. The result is an extremely heat-resistant seal, unaffected by line pressure or vibration. Key Features Increased throughput full-bore unrestricted flow Tight seal in all flow conditions; bi-directional mechanical sealing Can replace two valves; double block and bleed capability Long, leak-free service life; protected seat design Easy to operate and maintain Sizes 2" and larger in all ANSI classes COMPACT EXPANDING GATE VALVE The M&J Model CEG valves are full- or reduced-opening, non-through-conduit valves with rising stem, parallel expanding gate and segment for tight mechanical seal and positive shut-off, both upstream and downstream, under both low and high differential pressure. This design has proven performance in applications worldwide, such as isolation valves in power plants, ESD valves in production, block valves in process systems, high-temperature valves in refineries, and pipeline valves in critical areas. Key Features Superior sealability through use of two-piece parallel expanding gate Double block and bleed Traps pressure in body cavity when in closed position Pressure gauge seating; long seat life Stem seal s chevron rings ensure sealing integrity In-line maintenance Sizes 4" and larger, Classes 150 and 300 DANFLO SURGE RELIEF VALVES DANFLO surge relief valves are engineered to track unabated surge (wave pressure transients), open quickly and then close without slamming shut. The speed of response in surge valves is defined as the valve s ability to relieve peak wave surge flow in the time stated in a hydraulic transient surge analysis. Although this time varies with each application, timed responses of 100 milliseconds or less are not unusual. DANFLO surge relief valves meet these criteria. Key Features High flow capacities (Cv) achieve required surge protection with smaller and/or fewer valves, saving both installation cost and weight Fast response rapid opening/closing without slamming shut enables tracking of the surge Additional reserve flow capacity accommodates unforeseen transient surge flow Set pressure test port to meet DOT periodic-testing requirements PERFORMANCE LEADER IN THRU-CONDUIT GATE VALVES M-303 M&J VALVE SLAB GATE VALVE Expanding Gate Valve Compact Expanding Gate Valve Swing Check Valve 22

SPX FLOW and Quality Policy SPX FLOW is committed to providing to providing products and services that meet or exceed API and customer requirements, and strive to constantly improve customer satisfaction through employee participation. ISO/API Certificates Houston, TX Large Valve CNC Robotic Welder 23

Trunnion Mounted Ball Valve Based in Charlotte, North Carolina, SPX FLOW, Inc. (NYSE:FLOW) is a leading global supplier of highly engineered flow components, process equipment and turn-key systems, along with the related aftermarket parts, serving the food and beverage, power and energy and industrial end markets. For more information, please visit www.spxflow.com. SPX FLOW, INC. 8800 Westplain Dr. Houston, TX 77041 P: (800) 231-3690 or (281)469-0550 F: (281) 894-1332 E: mjvalve@spxflow.com SPX FLOW, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction, and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Please contact your local sales representative for product availability in your region. For more information, visit www.spxflow.com. The green and are trademarks of SPX FLOW, Inc. MJ-1964-US Version 01/2016 Issued 01/2016 COPYRIGHT 2016 SPX FLOW, Inc.