The VATORC 50-SN Series 3/4/5-Way Sanitary Ball Valve The 50-SN is a true multi-way Ball valve with balanced seat construction. Porting and shut-off capabilities can reduce the number of process valves required in a piping system. This full port valve is available in a number of flow configurations with both clamp and tube butt weld end connections. Multi-Position ever Handle ISO 5 Mounting Pad Clamp, Tube or Extended Tube Butt Weld Ends Positioning Pin High-Cycle, ive-oaded Stem Packing Multiple Flow Configurations Full Port Construction Standard Features and Benefits Balanced 4-Seat or 5-Seat Construction Unlike two-seated diverter valves and other multi-port valves on the market, the 50-SN series has four seats (five seats in bottom entry valves) for positive shut-off in the closed position. This true multi-port function can reduce the number of valves required in a process system, and provides engineers greater design flexibility Trunnion Mounted Ball ( / - 4 ) ateral forces in a 3-way valve can cause unwanted seat distortion. Stem/ball isolation prevents side loading and wear of downstream seats improving performance and service life ISO 5 Mounting Pad High-Cycle, ive-oaded Stem Packing Dynamic loading on stem packing ensures a tight seal through varying pressure and temperature conditions, extending service life and reducing maintenance costs Blow-Out-Proof Stem Stem is bottom loaded to prevent removal when valve is in service Full Port Design Full port construction improves flow characteristics for greater process efficiencies 5 Ra Internal Surface Finish Options 4- or 5-way construction with multiple flow patterns Clamp, tube butt weld, extended tube butt weld, or compression end connections Finer internal surface finishes available 50-SN Pressure / Temperature Chart (TFM Seats) 00 000 800 600 400 00 / - -/ - 3-4 0-0 0 00 00 300 400 450 Temperature ( F) Operating Conditions Temperature range (TFM): -0 F ~ 400 F Maximum pressure (TFM): 000 PSI (/ - ), 800 PSI (-/" - ") 600 PSI (3" - 4") Specifications All valves shell and seat tested to ANSI/ASME B6.34 and API 598 All materials comply with applicable ASTM material specifications All soft wetted parts comply with FDA CFR Title Part 77
/" ~ " W OP (B.C.) 3 4 7 6 M 8 0 5 9 8 5 0 Valve Components # Part Name Material Qty. Body A35 Gr. CF8M End Cap A35 Gr. CF8M 3 3 Blind End Cap A35 Gr. CF8M 4 Ball 36SS 5 Stem 36SS 6 Seat TFM 4 7 Body Seal TFM 4 8 Thrust Washer PEEK A A' 9 Stem Packing Set TFM 0 Packing Gland 304SS Belleville Washer 30SS 4 9 3 4 Gland Nut 304SS 3 Gland Nut ock Washer 304SS 4 Stop Plate 304SS 5 Positioning Pin 304SS 6 Handle 304SS 7 Handle Nut 304SS 8 Handle Cover Vinyl 9 Body Bolt 304SS 6 0* Stem Set Pin 36SS * Trunnion Bearing TFM * Trunnion Bolt 304SS 4 3* Trunnion 36SS 4* Trunnion Seal TFM Part numbers 0 to 4 are for / - size only 4 3 6 A - A' View, Port Flow 7 Dimensions (Inches) Size C / BW EW M H G B D T E F P W ISO 5 Pattern Weight (lbs) / 4.00 5.87 5.7 3/4 5.00 7.4 5.7 6.00 9.00 7.80 / 7.5 0.00 9.84 8.50.00.0 3.07 0.47 0.47 0.37 3.07 0.47 0.79 0.6 3.60 0.55 0.98 0.87 5.0 0.7.50.37 6.0 0.87.00.87 0.35 0.7 0.44.97 M6 0.35 0.7 0.44.97 M6 0.43.06 0.5.76 M8 0.55.79 0.73 4.0 M0 0.67.0 0.85 4.0 M0 F05 4.00 F05 5.00 F07 9.00 F0 0.00 F0 30.0
Flow Pattern Options No. Turn 3 Way - Side Entry, T-Port 3 Way - Side Entry, -Port Positions 0 90 A & B 0 90 B & C 03 90 C & D 04 90 D & A 80 A & B & C 3 80 B & C & D 34 80 C & D & A 4 80 D & A & B 4 Position D 3 No. Turn Positions 0 90 A & B 3 Way - Bottom Entry, 80 -Port 3 Way - Bottom Entry, 90 Angle Port 0 90 A & B 0 90 A & B 0 90 B & C 80 A & B & C 4 Way - Bottom Entry, -Port 4 Way - Side Entry, Double -Port No. Turn Positions 0 90 A & B 0 90 B & C 80 A & B & C No. Turn Positions 0 00 90 360 A & B All 4 Way - Bottom Entry, Double -Port 5 Way - Bottom Entry, Angle Port 0 90 A & B 0 90 A & B 3 Way - Bottom Entry, 80 T-Port 3 Way - Bottom Entry, 80 Double -Port 0 90 A & B 0 90 A & B
"" Port Flow Valve Components f# Part Name Material Qty. Body A35 Gr. CF8M End Cap (small) A35 Gr. CF8M 3 A Blind End Cap (large) A35 Gr. CF8M 3 Ball 36SS 4 Stem 36SS 5 Seat TFM 4 6 Body Seal (small) TFM 3 6A Body Seal (large) TFM I hrust Washer PEI::.K 8 Stem Packing Set TFM 9 Packing Gland 304SS 0 Belleville Washer 30SS 4 Gland Nut 304SS Gland Nut ock Washer 304SS 3 Stop Plate 304SS 4 Positioning Pin 304SS 5 Handle Drive Coupling 304SS 6 Pipe Handle 304SS 7 Handle Bolt 304SS 8 Stem Bearing PEEK 9 Body Bolt 304SS 0 0 Seat Retainer 36SS 4 Seat Retainer ().Ring Viton90 4 Stem Set Pin 36SS 3 Trunnion Bearing PEEK 4 Trunnion Seal PEEK 5 Tf\Jnnion 36SS 6 Trunnion Bolt 304SS 4 Dimensions (Inches) ISO 5 Weight Size M H D B s E F p w C / BW EW Pattern (lbs) 3 0.50.00.00 7.50.87.9 0.87.3 0.94 4.0 M0 F0 57.00 4.50 4.00 3.00 8.0 3.83 3.78 0.87.5 0.90 4.0 M0 F0 75.00