SZB IT SZE PC SJB SRD SRX ZPAS 05
SZB IT 9 " NETWORK/SERVER CABINETS STANDARD CABINETS WITH FRONT GLASS DOOR WITH METAL SIDES available in constant supply from warehouse 00 kg SCOPE OF DELIVERY - Dismountable frame (bottom plate, top plate, four posts). - Front glass door with metal sides and lock with swing handle; cabinets 45 or 4 U high have a three-point lock, cabinets 4 U high have a single-point lock. - Rear solid steel, shortened door with single-point locks without handle; U cable entry panel with a brush strip, mounted under the shortened door. - Two solid steel side panels with single-point locks. - Two pairs of 9" mounting profiles, stepless adjustable. - Earthing bar and earthing cables for doors and side panels. - Four levelling feet. TECHNICAL DATA Material Frame, side panels, solid steel door, mounting profiles, C-profiles - sheet steel Door with glass - sheet steel, clear mineral safety glass Outriggers - zamak casting Protection degree IP 0 in accordance with EN 6059 (does not apply to brush cable entries). Surface finishing Frame, doors, side panels - powder paint, light grey (RAL 05) Mounting profiles, C-profiles - Al-Zn coated Maximum permissible load See page ADVANTAGES - Cable openings in the top and bottom plates, mm wide, what allows to put thought the power cable with three-phase plug. - All openings in the top and bottom plates blanked with knock-out blanking plates. - U-marking on the mounting profiles. - Maximum opening angle for front door - Possibility to change door opening s direction. - Possibility to put the cabinet directly on the floor (no protruding elements under the cabinet). - Adaptation for bying the cabinets in the rows and Data Box creation (cold/hot aisle - see page 5). ACCESSORIES from page 45 - Roof page 50 - Plinth, castors page 46 - Fan units page 6 - Blanking and cable entry plates page 6 - Power strips page 6 - Shelves page 5 REFERENCE CHART Height [U] 45 U 4 U Width [mm] Depth [mm] RAL colour Catalogue number 00 00 05 WZ-IT-4500-69AA--0 600 600 05 WZ-IT-456060-69AA--0 00 600 00 05 WZ-IT-400-69AA--0 600 05 WZ-IT-4060-69AA--0 00 05 WZ-IT-4600-69AA--0 600 05 WZ-IT-46060-69AA--0 00 05 WZ-IT-400-69AA--0 00 600 05 WZ-IT-4060-69AA--0 4 U 00 05 WZ-IT-4600-69AA--0 600 600 05 WZ-IT-46060-69AA--0 Other available configurations are presented on pages - View on the top plate View on the bottom plate. Under the rear door is mounted U cable entry panel with a brush strip. 06 ZPAS
NETWORK/SERVER CABINETS SZB IT 9 " Hinges enabling opening door by Three-point rod-latch lock with a swing handle Additional holes under the hinges, allowing change the door opening direction Cabinet 600 mm wide Holes for baying cabinets in a row U-marking on the mounting profiles Cabinet 00 mm wide See the video: zpas.pl/qr/f ZPAS 0
SZB IT 9 " NETWORK/SERVER CABINETS STANDARD CABINETS WITH PERFORATED STEEL DOOR available in constant supply from warehouse 60 kg SCOPE OF DELIVERY - Dismountable frame (bottom plate, top plate, four posts). - Front and rear door steel perforated (clearance 0%) with three-point lock with swing handle. - Two solid steel side panels with single-point locks. - Two pairs of 9" mounting profiles, stepless adjustable. - Earthing bar. - Earthing cables for doors and side panels. - Four levelling feet. TECHNICAL DATA Material Frame, side panels, doors, mounting profiles, C-profiles - sheet steel Outriggers - zamak casting Protection degree IP 0 in accordance with EN 6059 (does not apply to brush cable entries). Surface finishing Frame, doors, side panels - powder paint, light grey (RAL 05) or black (RAL 9005) Mounting profiles, C-profiles - Al-Zn coated Maximum permissible load See page ADVANTAGES - Cable openings in the top and bottom plates, mm wide, what allows to put thought the power cable with three-phase plug. - All openings in the top and bottom plates blanked with knock-out blanking plates. - U-marking on the mounting profiles. - Maximum opening angle for front and rear door - Possibility to change door opening s direction. - Possibility to put the cabinet directly on the floor (no protruding elements under the cabinet). - Adaptation for bying the cabinets in the rows and Data Box creation (cold/hot aisle - see page 5). ACCESSORIES from page 45 - Roof page 50 - Plinth, castors page 46 - Fan units page 6 - Blanking and cable entry plates page 6 - Power strips page 6 - Shelves page 5 View on the top plate REFERENCE CHART Height [U] Width [mm] Depth [mm] RAL colour Catalogue number 05 WZ-IT-40-44AA--0 00 00 9005 WZ-IT-40-44AA--6 4 U 05 WZ-IT-460-44AA--0 600 00 9005 WZ-IT-460-44AA--6 Other available configurations are presented on pages - View on the bottom plate 0 ZPAS
NETWORK/SERVER CABINETS SZB IT 9 " Hinges enabling opening door by Three-point rod-latch lock with a swing handle Additional holes under the hinges, allowing change the door opening direction Cabinet 600 mm wide Holes for baying cabinets in a row U-marking on the mounting profiles Cabinet 00 mm wide ZPAS 09
SZB IT 9 " NETWORK/SERVER CABINETS A-A section (00 mm deep cabinet) B-B section (00 mm deep cabinet) DESIGN 0 0. Frame s post. Frame s bottom plate 4. Frame s top plate 5. Adjustable feet 6. C-profile. Outrigger. Mounting profile 9. Earthing bar. Knock-out blanking plate 0 x 0 mm. Knock-out blanking plate 0 x mm A-A section B-B section Note: The cabinet in the drawing is shown without any panels or doors. 4 Front wiev (600 mm wide cabinet) 4 Front wiev (00 mm wide cabinet) Side wiev Side wiev (00 mm deep cabinet) A A B B W = 600 W = 00 D = 600 D = 00 5 9" mounting profile. n x 44.45.5 44.45 6. 5 0 49 H HU C C D D 6 6 5-5 C-C section 9 D-D section 9 DU max = D - 0 D = 600 465 465 C-C section (00 mm deep cabinet) D-D section (00 mm deep cabinet) DU max = D - 0 D = 00.5 00 ZPAS
NETWORK/SERVER CABINETS SZB IT 9 " Przekrój M-M (szafa o głębokości 00 mm) Przekrój N-N (szafa o głębokości 00 mm) DESIGN 0 Przekrój M-M (szafa o głębokości 00 mm) 0 4 0 0 0 0 Przekrój N-N (szafa o głębokości 00 mm) 0. Frame s post. Frame s middle post. Frame s bottom plate 4. Frame s top plate 5. Adjustable feet 6. C-profile. Outrigger. Mounting profile 9. Earthing bar. Knock-out blanking plate 0 x 0 mm. Knock-out blanking plate 0 x mm. Knock-out blanking plate 0 x mm Note: The cabinet in the drawing is shown without any panels or doors. Widok z przodu (szafa o szerokości 600 mm) 4 Widok z przodu (szafa o szerokości 00 mm) Widok z boku (szafa o głębokości 00 mm) Widok z boku (szafa o głębokości 00 mm) M M N N H HU O O P P 6 6 L = 600 L = 00 G = 00 G = 00 5 Belka nośna 9" 6, 5,5, 44,45 n x 44,45,5 5-5 Przekrój O-O (szafa o głębokości 00 mm) 9 Przekrój P-P (szafa o głębokości 00 mm) GU max = G - 0 GU max = G - 0 Przekrój O-O (szafa o głębokości 00 mm) G = 00 G = 00 Przekrój P-P (szafa o głębokości 00 mm) 49 0 465 465 ZPAS 0
SZB IT 9 " NETWORK/SERVER CABINETS CABINET CONFIGURATOR REFERENCE CHART Width W [mm] 00 600 Depth D [mm] Reference number 00-4500 400 00 400 0 600-45060 4060 060 4060 60 00 40 450 40-40 - 00 40 450 40 - - - 00-45600 4600 600 4600 600 600-456060 46060 6060 46060 6060 00 460 4560 460-460 - 00 460 4560 460 - - - Usable height HU [U = 44.45 mm] 4 U 45 U 4 U U 4 U U Frame height H [mm] 6 096 96 56 6 96 Note: Cabinets available in constant supply from warehouse are listed and described on pages 6-9. CATALOGUE NUMBER OF SZB IT CABINET WZ-IT-XXXXXX-XXXX-X-XXX F R LS RS Reference number specifies the cabinet s overall dimensions (see reference chart). Cabinet's colour: 0 - RAL 05 6 - RAL 9005 F - FRONT R - REAR Door or panel types: 0 - without door or without panel - single-leaf solid steel door with lock with swing handle - double-leaf solid steel door with lock with swing handle 4 - single-leaf perforated door (0% clearance) with lock with swing handle 5 - double-leaf perforated door (0% clearance) with lock with swing handle 6 - glass door with metal sides and lock with swing handle - steel door with glass and lock with swing handle 9 - solid steel, shortened door with single-point locks without handle and U cable entry panel with a brush strip, mounted under the shortened door A - solid steel panel with single-point locks Maximum door opening angle:,, 4, 5, 6, 9 Type of lock with handle: Layout of mounting profiles or mounting angles inside the cabinet: - two pairs of 9" mounting profiles and one pair of middle mounting profiles - two pairs of 9" mounting profiles - two pairs of 9" mounting angles LS - LEFT SIDE RS - RIGHT SIDE Side panel types: 0 - without any panel A - solid steel door with single-point locks B - perforated steel panel (0% clearance) with single-point locks Note: The delivery of each SZB IT cabinet (except for elements listed in cat. no.) includes the following: four levelling feet, earthing bar and earthing cables for door and side panels. Other equipment (roof, plinth, castors, blanking and cable entry plates, shelves etc.) are ordered separately - see pages 45-). Cabinets height: -4 U - three-point rod-latch lock Cabinets height: -4 U - single-point lock -4 U -4 U Maximum load capacity for SZB IT cabinets The maximum weight of equipment mounted in SZB IT cabinets is: 00 kg* - for cabinets depth 600 or 00 mm for all heights based on levelling feet, plinth or directly on the floor - for cabinets depth 00 mm and height 4U based on levelling feet, plinth or directly on the floor 60 kg* - for cabinets depth 00 or 00 mm based on levelling feet, plinth or directly on the floor (except height 4U) 50 kg - for cabinet with castors type 50 500 kg - for cabinet with castors type 00 *) Declared carrying capacity is valid if maintaining the maximum distance between mounting profiles on the depth and even loading. 0 ZPAS
NETWORK/SERVER CABINETS SZB IT 9 " CABINET CONFIGURATOR AVAILABLE DOOR TYPES AND PANELS [] Single-leaf solid steel door [] Double-leaf solid steel door [4] Single-leaf perforated door (0% clearance) [5] Double-leaf perforated door (0% clearance) [6] Glass door with metal sides [] Steel door with glass [9] Solid steel, shortened door + U cable entry panel with a brush strip [A] Solid steel panel ZPAS 0