PRICE SCHEDULE 8.0 Sander VENDOR TO PROVIDE FOLLOWING DETAIL Sander - Make and Model Type of sander Warranty Info Falls 1ASD Tailgate 6 & 9" Sanders (Stainless Steel) Under tailgate Center line discharge 2 Years from in service date TOTAL PRICE: See Attached Schedule 8.0-1 8.1 - Installation of Sander PRICE See Attached Schedule 8.0-1 8.2 - List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use as many numbers as needed. See Attached Schedule 8.0-1 Cost per loaded mile for delivery of sander $ 1.50 VENDOR: Bert's Truck Equipment of Moorhead, Inc CONTACT PERSON: Jim McLaughlin ADDRESS: 3804 Hwy 75 North, Po Box 336, Moorhead MN 56561-0336 PHONE NO.:218-233-8681 TOLL FREE:800-232-3787 FAX NO. 218-233-9548 E-MAIL ADDRESS: jimmc@bertsonline.com
Bert's Truck Equipment of Moorhead, Inc 8.0-1Price Schedule for Falls Sanders 23-Jan-17 Falls Tailgate Spreaders 8.0-1 (1) Falls 1ASD-6CD-SS 6" Stainless Steel Tailgate Spreader $ 3,600.00 8.0-1 (2) Falls 1ASD-6CD-SS 6" Stainless Steel Tailgate Spreader (10 or more on Single order, Each) $ 3,420.00 8.0-1 (3) Falls 1ASD-6CDLM-SS 6" Stainless Steel Salt Special Spreader $ 4,495.00 8.0-1 (4) Falls 1ASD-6CDLM-SS 6" Stainless Steel Salt Special Spreader, (10 or more on Single order, Each) $ 4,295.00 8.0-1 (5) Falls 1ASD-SS 9" Stainless Steel Tailgate Spreader (includes berm chute and Poly Spinner) $ 4,272.00 8.0-1 (6) Falls 1ASD-SS 9" MN DOT Stainless Steel Tailgate Spreader Qyt 10 + on a single order each (includes berm chute and Poly Spinner) $ 4,095.00 8.1 (1) Installation of Stainless Steel Sander at Bert's Truck Equipment $ 625.00 Installtion of Dual Spinner sanders at Berts $ 1,025.00 8.1 (2) Installation of Stainless Steel Sander at Little Falls Machine $ 830.00 8.1 (3) Adder for Little Falls machine to install and plumb Dual Flow Valve (Does not include Valve) $ 235.00 Options 8.20 Dual Spinner Option $ 823.00 8.20A Dual Spiiner Option, MN DOT (Qty 10+ Price, Each) $ 790.00 8.22 Dual flow control valve (if not included in Hydraulics) $ 286.00 8.23 Standard Spill shields $ 79.00 8.24 Steel Spill shields for Elliptical Dump Bodies $ 250.00 8.25 Stainless Steel Spill shields for Elliptical Dump Bodies $ 450.00 8.26 Delete berm chute (9 sander) $ (68.00) 8.27 If anti flow cover if not needed $ (48.00) 8.28 4" Auger Flighting on 9" sander ILO 6" $ 310.00 8.29 Body Manifold plate/box for sander connections LH or RH $ 230.00 8.30 Short Hose Kit (included in all Hydraulic Installations) $ 180.00 8.31 Quick Couplers (included in all hydraulic installations) $ 143.00 8.99 Inbound shipping Lttle Falls, MN to Moorhead, MN $ 100.00 Optional controls (see optional hydraulics and options) VENDOR Bert's Truck Equipment Inc. CONTACT PERSON Jim McLaughlin ADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN 56560 PHONE NO. 218-233-8681 TOLL FREE 800-232-3787 FAX NO. 218-233-9548 E-MAIL ADDRESS : jimmc@bertsonline.com
PRICE SCHEDULE 8.0 Sander VENDOR TO PROVIDE FOLLOWING DETAIL Sander - Make and Model Type of sander Warranty Info Swenson Tailgate 6 & 9" Sanders (Carbon & Stainless Steel) Under tailgate Center line discharge 2 Years from in service date TOTAL PRICE: See Attached Schedule 8.0-2 8.1 - Installation of Sander PRICE See Attached Schedule 8.0-2 8.2 - List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use as many numbers as needed. See Attached Schedule 8.0-2 Cost per loaded mile for delivery of sander $ 2.00 VENDOR: Bert's Truck Equipment of Moorhead, Inc CONTACT PERSON: Jim McLaughlin ADDRESS: 3804 Hwy 75 North, Po Box 336, Moorhead MN 56561-0336 PHONE NO.:218-233-8681 TOLL FREE:800-232-3787 FAX NO. 218-233-9548 E-MAIL ADDRESS: jimmc@bertsonline.com
Bert's Truck Equipment of Moorhead, Inc 8.0-2 Price Schedule for Swenson Sanders 17-Aug-15 Swenson Tailgate Spreaders 8.0-2 (1) Swenson Model SAD 6" Carbon Steel (Powered Coated Orange) $ 1,941.00 8.0-2(2) Swenson Model SADS, 304 stainless steel $ 3,226.00 8.0-2 (3) Swenson Model SBD-9 Carbon Steel (Powered Coated Orange) w/berm chute $ 2,857.00 8.0-2 (4) Swenson Model SBD-9S, 304 stainless steel $ 4,130.00 8.0-2 (5) Swenson Model STCC Cross Conveyor spreader Carbon Steel (Powered Coated Orange) $ 5,625.00 8.0-2 (6) Swenson Model STCCS, Cross Conveyor spreader 304 stainless steel $ 8,872.00 8.1 (1) Installation of Swenson Sander at Bert's Truck Equipment $ 700.00 Options 8.20 Reversing Valve $ 586.00 8.21 Spinner Assembly $ 1,939.00 8.22 Storage Legs $ 2,482.00 8.23 4' Motorized Extension $ 3,675.00 8.24 24" Extension Chute $ 387.00 8.25 Light Bar $ 1,169.00 8.26 Standard Spill shields $ 80.00 8.27 Steel Spill shields for Elliptical Dump Bodies $ 250.00 8.28 Stainless Steel Spill shields for Elliptical Dump Bodies $ 450.00 8.29 Manifold plate/box for sander connections $ 230.00 8.30 Short Hose Kit (included in all Hydraulic Installations) $ 195.00 8.31 Quick Couplers (included in all hydraulic installations) $ 150.00 Optional controls (see optional hydraulics and options) VENDOR Bert's Truck Equipment Inc. CONTACT PERSON Jim McLaughlin ADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN 56560 PHONE NO. 218-233-8681 TOLL FREE 800-232-3787 FAX NO. 218-233-9548 E-MAIL ADDRESS : jimmc@bertsonline.com
PRICE SCHEDULE 8.0 Sander VENDOR TO PROVIDE FOLLOWING DETAIL Sander - Make and Model Type of sander Warranty Info Swenson V-box Spreaders Hydraulic & Electric V-Box Hydraulic Insert Sanders 2 Years from in service date TOTAL PRICE: See Attached Schedule 8.0-3 8.1 - Installation of Sander PRICE See Attached Schedule 8.0-3 8.2 - List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use as many numbers as needed. See Attached Schedule 8.0-3 Cost per loaded mile for delivery of sander $ 2.00 VENDOR: Bert's Truck Equipment of Moorhead, Inc CONTACT PERSON: Jim McLaughlin ADDRESS: 3804 Hwy 75 North, Po Box 336, Moorhead MN 56561-0336 PHONE NO.:218-233-8681 TOLL FREE:800-232-3787 FAX NO. 218-233-9548 E-MAIL ADDRESS: jimmc@bertsonline.com
Bert's Truck Equipment of Moorhead, Inc 8.0-3 Price Schedule for Swenson V-Box Spreaders 23-Jan-17 EV100 Series Hydraulic driven spreader Manufactured of 10 gauge carbon steel sides/ends or 12 ga Stainless Steel 82" wide hopper, 56" side Hieght 7 gauge slotted longitudinals for easy gearbox/drive shaft removal (10ga On SS Models) 45 degree side slope Bolt in 6" wide flange (H) beam Drop N Loc top screens 1 1/2" drive shaft, 1 1/4" idler shaft, spring loaded chain take up 7 gauge bolt in replaceable conveyor floor (10 ga on SS Models) Self cleaning pintle style conveyor chain (21,000 lbs. tensile strength per strand) 1 1/2" x 1/4" double welded cross bars Rear chain wiper 12" adjustable in height spinner extension 1 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Powder coated Omaha Orange (carbon steel Units) An optional inverted vee is recommended on hoppers over 12' in length or 62" in height Gear Box Ratio: 25:1, 6 tooth Sprocket, 1/4" thick Crossbars 18" Spinner Disk, Bottom Mount Motor Carbon Steel Spreaders 8.0-3 (1) 8 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 6,987.00 8.0-3 (2) 9 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 7,163.00 8.0-3 (3) 10 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 7,319.00 8.0-3 (4) 11 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 7,698.00 8.0-3 (5) 12 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 8,065.00 8.0-3 (6) 13 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 8,707.00 8.0-3 (7) 14 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 9,386.00 8.0-3 (8) 15 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 9,672.00 Stainless Steel Spreaders 8.0-3 (9) 8 ft Swenson EV 100 V box Spreader, Stainless Steel $ 9,661.00 8.0-3 (10) 9 ft Swenson EV 100 V box Spreader, Stainless Steel $ 10,053.00 8.0-3 (11) 10 ft Swenson EV 100 V box Spreader, Stainless Steel $ 10,347.00 8.0-3 (12) 11 ft Swenson EV 100 V box Spreader, Stainless Steel $ 10,810.00 8.0-3 (13) 12 ft Swenson EV 100 V box Spreader, Stainless Steel $ 11,332.00 8.0-3 (14) 13 ft Swenson EV 100 V box Spreader, Stainless Steel $ 11,985.00 8.0-3 (15) 14 ft Swenson EV 100 V box Spreader, Stainless Steel $ 12,516.00 8.0-3 (16) 15 ft Swenson EV 100 V box Spreader, Stainless Steel 13,045.00 $ The following items are not stainless steel: top screens, spinner disc/fins, conveyor chain, sprockets, gearbox, gatejack, drive shaft, idler shaft, and hydraulic motors.
Stainless steel units are not painted. Note: Recommended material size is 1/2" or smaller. EV150 Series Hydraulic driven spreader Manufactured of 10 gauge carbon steel sides/ends or 12 ga Stainless Steel 82" wide hopper, 56" side Hieght 7 gauge slotted longitudinals for easy gearbox/drive shaft removal (10ga On SS Models) 45 degree side slope Bolt in 6" wide flange (H) beam Drop N Loc top screens 2" drive shaft, 2" idler shaft, spring loaded chain take up to the rear 7 gauge bolt in replaceable conveyor floor (10 ga on SS Models) Self cleaning pintle style conveyor chain (21,000 lbs. tensile strength per strand) 1 1/2" x 3/8" double welded cross bars Rear chain wiper 12" adjustable in height spinner extension 2 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Powder coated Omaha Orange (carbon steel Units) An optional inverted vee is recommended on hoppers over 12' in length or 62" in height Gear Box Ratio: 50:1, 8 tooth Sprocket, 3/8" thick Crossbars 20" Spinner Disk, Top Mount Motor Carbon Steel Spreaders 8.0-3 (17) 8 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 8,153.00 8.0-3 (18) 9 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 8,399.00 8.0-3 (19) 10 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 8,568.00 8.0-3 (20) 11 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 9,276.00 8.0-3 (21) 12 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 9,607.00 8.0-3 (22) 13 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 10,468.00 8.0-3 (23) 14 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 11,291.00 8.0-3 (24) 15 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 11,538.00 Stainless Steel Spreaders 8.0-3 (25) 8 ft Swenson EV 150 V box Spreader, Stainless Steel $ 11,861.00 8.0-3 (26) 9 ft Swenson EV 150 V box Spreader, Stainless Steel $ 12,353.00 8.0-3 (27) 10 ft Swenson EV 150 V box Spreader, Stainless Steel $ 12,768.00 8.0-3 (28) 11 ft Swenson EV 150 V box Spreader, Stainless Steel $ 13,645.00 8.0-3 (29) 12 ft Swenson EV 150 V box Spreader, Stainless Steel $ 14,137.00 8.0-3 (30) 13 ft Swenson EV 150 V box Spreader, Stainless Steel $ 14,991.00 8.0-3 (31) 14 ft Swenson EV 150 V box Spreader, Stainless Steel $ 15,653.00 8.0-3 (32) 15 ft Swenson EV 150 V box Spreader, Stainless Steel $ 16,307.00 The following items are not stainless steel: top screens, spinner disc/fins, conveyor chain, sprockets,
gearbox, gatejack, drive shaft, idler shaft, and hydraulic motors. Stainless steel units are not painted. Note: Recommended material size is 1/2" or smaller. EVA 100 Series Single and Dual Auger Spreaders Hydraulic driven spreader Manufactured of 10 gauge carbon steel sides/ends, or 12 Ga Stainless Steel 84" wide hopper 45 degree side slope 54" Bolt in 6" wide flange (H) beam Drop N Loc top screens 7 gauge bolt in replaceable conveyor floor 7" diameter hard surfaced auger with 3 pitch lengths for even unloading front to back Direct drive 18 HP hydraulic motor 12" adjustable in height spinner extension 1 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Side swing up spinner assembly for easy unloading and storage Rear grease extension Inverted vee Powder coated Omaha Orange Spinner Disc: 18" Mild Steel Motor Mount: Bottom Carbon Steel 8.0-3 (33) 8 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 8,153.00 8.0-3 (34) 9 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 8,322.00 8.0-3 (35) 10 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 8,484.00 8.0-3 (36) 11 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 8,976.00 8.0-3 (37) 12 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 9,230.00 8.0-3 (38) 13 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 9,884.00 8.0-3 (39) 14 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 10,622.00 8.0-3 (40) 15 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 10,953.00 8.0-3 (41) 8 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 12,022.00 8.0-3 (42) 9 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 12,522.00 8.0-3 (43) 10 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 12,930.00 8.0-3 (44) 11 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 13,807.00 8.0-3 (45) 12 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 14,299.00 8.0-3 (46) 13 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 14,960.00 8.0-3 (47) 14 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 15,814.00 8.0-3 (48) 15 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 16,476.00 8.0-3 (49) Upcharge for Dual Auger ILO Single Auger $ 1,150.00
VBEL Series Electric V-Box Spreader Electrically driven spreader Manufactured of 10 gauge carbon steel sides/ends 82" wide hopper 7 gauge slotted longitudinals for easy gearbox/drive shaft removal 45 degree side slope Bolt in 6" wide flange (H) beam Drop N Loc top screens 1 1/2" drive shaft, 1 1/4" idler shaft, spring loaded chain take up 7 gauge bolt in replaceable conveyor floor Self cleaning pintle style conveyor chain (21,000 lbs. tensile strength per strand) 1 1/2" x 1/4" double welded cross bars Rear chain wiper 12" adjustable in height spinner extension 1 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Powder coated Omaha Orange Standard inverted vee on all spreaders 2 motor variable speed controller Standard flip up spinner Wiring harness included All standard v-box options available Chain Drive Motor: 1/2 HP Spinner Motor:1/2 HP Cross Bars:1/4" thick 8.0-3 (50) 10 ft Swenson VBEL Electric V box Spreader, Carbon Steel, Factory Orange $ 12,614.00 8.0-3 (51) 12 ft Swenson VBEL Electric V box Spreader, Carbon Steel, Factory Orange $ 13,999.00 8.0-3 (52) 10 ft Swenson VBEL Electric V box Spreader, Stainless Steel $ 17,230.00 8.0-3 (53) 12 ft Swenson VBEL Electric V box Spreader, Stainless Steel $ 18,691.00 Installtion of V Box Sanders 8.10 (1) Installtion of Hydraulic V- Box sanders $ 635.00 0.80 (2) Installtion of Electric V- Box sanders $ 635.00
Options for Options For Swenson Hydraulic and Electric V-Box Spreaders 18 HP Kolher Gas Engine Package 8.20 EVRGH (carbon steel Units) $ 5,058.00 8.21 EVRGH- SS (Stainless Steel units $ 7,003.00 Leg Stands Carbon Steel 8.22 8 FT $ 2,101.00 8.23 9 FT $ 1,938.00 8.23 10 FT $ 2,334.00 8.24 11 FT $ 2,451.00 8.24 12 FT $ 2,568.00 8.25 13 FT $ 2,685.00 8.25 14 FT $ 2,801.00 8.26 15 FT $ 2,918.00 8.26 16 FT $ 4,032.00 8.27 Factory Installation of Leg Stand $ 117.00 Leg Stands Stainless Steel 8.28 8 FT $ 3,813.00 8.29 9 FT $ 3,969.00 8.29 10 FT $ 4,124.00 8.30 11 FT $ 4,280.00 8.30 12 FT $ 4,436.00 8.31 13 FT $ 4,591.00 8.31 14 FT $ 4,747.00 8.32 15 FT $ 4,903.00 8.32 16 FT $ 4,032.00 8.33 Factory Installation of Leg Stand $ 117.00 Inverted Vee (Carbon Steel) 8.34 8 FT $ 288.00 8.35 9 FT $ 288.00 8.36 10 FT $ 460.00 8.37 11 FT $ 460.00 8.38 12 & 13 FT $ 502.00 8.39 14 FT $ 537.00 8.40 15 FT $ 537.00 Inverted Vee (Stainless Steel) 8.41 8 FT $ 627.00 8.42 9 FT $ 627.00 8.43 10 FT $ 718.00 8.44 11 FT $ 718.00 8.45 12 & 13 FT $ 740.00 8.46 14 FT $ 776.00 8.47 15 FT $ 776.00
Rubber Side Shield (Carbon) 8.48 8 FT $ 732.00 8.49 9 FT $ 732.00 8.50 10 FT $ 744.00 8.51 11 FT $ 744.00 8.52 12 FT $ 927.00 8.53 13 FT $ 956.00 8.54 14 FT $ 1,059.00 Rubber Side Shield (Stainless) 8.55 8 FT $ 1,180.00 8.56 9 FT $ 1,307.00 8.57 10 FT $ 1,338.00 8.58 11 FT $ 1,463.00 8.59 12 FT $ 1,534.00 8.60 13 FT $ 1,670.00 8.61 14 FT $ 1,720.00 Hydraulic Hose Kits 8.62 8' thru 11' $ 1,440.00 8.63 12' thru 15' $ 1,245.00 8.64 Dual Motor Short Hose Kit $ 354.00 8.65 Single Motor HYD Hose Kit up to 11' $ 643.00 8.66 Single Motor Short Hose Kit $ 141.00 8.67 Single Flow Control Valve (Fluid Contrl) $ 351.00 8.68 Dual Flow Control Valve (Fluid Control) $ 448.00 8.69 Valve Stand Kit $ 97.00 Reservoir Kits 8.70 7 GAL RESERVOIR KIT $ 701.00 8.71 15 GAL RESERVOIR KIT $ 906.00 STAINLESS STEEL LIGHT BAR 8.72 Stop, Turn, Tail Lights $ 1,323.00 8.73 Stop, Turn, Tail & Flashing Lights $ 1,354.00 8.74 Stop, Turn, Tail & Strobe Lights $ 1,634.00 8.75 Stop, Turn, Tail & Back UP Lights $ 1,478.00 8.76 4" Pedestal Mount Work Light $ 132.00
ACCESSORIES 8.77 Chassis Mtg Kit 8' - 11'- v-box length $ 206.00 8.78 Chassis Mtg Kit 12' - 15'- v-box length $ 288.00 8.79 Slip In Nylon Strap Kit (4 total) $ 280.00 8.80 Slip In Nylon Strap Kit (4 total SS Mtg) $ 303.00 8.81 Tailgate Latch $ 233.00 8.81-2 SS Tailgate Latch kit $ 585.00 8.82 Frnt Bearing Grease Ext. to Rear Manifld $ 249.00 8.83 Chain Oiler, Gravity (1 gal capacity) $ 241.00 8.84 Chain Oiler SS, Gravity (1 gal capacity) $ 295.00 8.85 Chain Oiler Poly Tank, Gravity (1 gal capacity) $ 241.00 8.86 Spill Shield, 8" Overhang, 80" Width $ 207.00 8.87 Spill Shield SS, 8" Overhang, 80" Width $ 351.00 8.88 Spill Shield, 12" Overhang, 80" Width $ 383.00 8.89 Spill Shield SS, 12" Overhang, 80" Width $ 506.00 8.90 Full Cabshield 80" Width $ 695.00 8.91 Full Cabshield SS 80" Width $ 1,053.00 8.92 Winch for Swing Up Spinner Assembly $ 611.00 8.93 Winch for Side Swing Up Spinner Assy $ 429.00 8.94 Observation Platform $ 747.00 8.95 Observation Platform (Stainless Steel) $ 1,167.00 8.96 Observation Platform for Units 64" or Higher $ 765.00 8.97 Observation Platform SS for Units 64" or Higher $ 1,245.00 Catwalks (Carbon Bodies) 8.98 8 & 9 FT $ 630.00 8.99 10 & 11 FT $ 708.00 8.100 12 & 13 FT $ 871.00 8.101 14 & 15 FT $ 1,011.00 Catwalks (Stainless Steel Bodies) 8.102 8 & 9 FT $ 1,478.00 8.103 10 & 11 FT $ 1,790.00 8.104 12 & 13 FT $ 1,945.00 8.105 14 & 15 FT $ 2,334.00 Swenson V-Box Spreader Upcharges ILO Standard Equipment Low Temp Belt over Chain 8.106 8 FT $ 1,891.00 8.107 9 FT $ 2,132.00 8.108 10 FT $ 2,140.00 8.109 11 FT $ 2,568.00 8.110 12 FT $ 2,996.00 8.111 13 FT $ 3,385.00 8.112 14 FT $ 3,179.00
8.113 15 FT $ 3,548.00 3/8" CROSSBAR in lieu of 1/4" 8.114 8 FT $ 94.00 8.115 9 FT $ 118.00 8.116 10 FT $ 125.00 8.117 11 FT $ 133.00 8.118 12 FT $ 141.00 8.119 13 FT $ 152.00 8.120 14 FT $ 176.00 8.121 15 FT $ 196.00 CROSSBAR EVERY LINK 8.122 8 FT $ 273.00 8.123 9 FT $ 304.00 8.124 10 FT $ 351.00 8.125 11 FT $ 402.00 8.126 12 FT $ 449.00 8.127 13 FT $ 487.00 8.128 14 FT $ 538.00 8.129 15 FT $ 585.00 BELT SEALERS 8.130 8 FT $ 176.00 8.131 9 FT $ 214.00 8.132 10 FT $ 214.00 8.133 11 FT $ 229.00 8.134 12 FT $ 229.00 8.135 13 FT $ 273.00 HEAVY DUTY TOP SCREENS LATERAL BARS 8.136 8 FT $ 351.00 8.137 9 FT $ 429.00 8.138 10 FT $ 506.00 8.139 11 FT $ 584.00 8.140 12 FT $ 662.00 8.141 13 FT $ 740.00 8.142 14 FT $ 818.00 8.143 15 FT $ 895.00 8.144 16 FT $ 973.00 STAINLESS STEEL TOP SCREENS 8.145 8 FT $ 1,401.00 8.146 9 FT $ 1,790.00 8.147 10 FT $ 1,868.00 8.148 11 FT $ 1,946.00 8.149 12 FT $ 2,141.00 8.150 13 FT $ 2,491.00 8.151 14 FT $ 2,569.00 8.152 15 FT $ 2,666.00
8.153 16 FT $ 2,744.00 METAL SIDE SPILL SHIELDS (2 per) 8.154 8 FT $ 234.00 8.155 9 FT $ 253.00 8.156 10 FT $ 273.00 8.157 11 FT $ 292.00 8.158 12 FT $ 331.00 8.159 13 FT $ 331.00 8.160 14 FT $ 351.00 8.161 16 FT $ 390.00 STAINLESS STEEL SIDE SPILL SHIELDS (2 per) 8.162 7 FT $ 390.00 8.163 8 FT $ 623.00 8.164 9 FT $ 623.00 8.165 10 FT $ 623.00 8.166 11 FT $ 857.00 8.167 12 FT $ 779.00 8.168 13 FT $ 857.00 8.169 14 FT $ 857.00 8.170 15 FT $ 857.00 8.171 16 FT $ 934.00 ROLLER CHAIN 8.172 9 & 10 FT $ 335.00 8.173 11 & 12 FT $ 507.00 8.174 13 & 14 FT $ 677.00 7 GAUGE SS FLOOR 8.175 9 FT $ 210.00 8.176 10 FT $ 265.00 8.177 11 FT $ 288.00 8.178 12 FT $ 331.00 8.179 13 FT $ 393.00 8.180 14 FT $ 429.00 FROM 12 GA STAINLESS STEEL to 10 GA SS 8.181 8 FT $ 666.00 8.182 9 FT $ 868.00 8.183 10 FT $ 1,070.00 8.184 11 FT $ 1,272.00 8.185 12 FT $ 1,360.00 8.186 13 FT $ 1,474.00 8.187 14 FT $ 1,588.00 8.188 15 FT $ 1,676.00 DEDUCT: TOP SCREEN 8.189 9 FT $ 247.00 8.190 10 FT $ 260.00 8.191 11 FT $ 273.00 8.192 12 FT $ 287.00 8.193 13 FT $ 334.00 8.194 14 FT $ 347.00 8.195 15 FT $ 360.00
8.196 16 FT $ 374.00 8.197 Swenson PPSII Percision Placement System $ 4,895.00 VENDOR Bert's Truck Equipment, Inc. CONTACT PERSON Jim McLaughlin ADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN 56561-0336 PHONE NO. 218-233-8681 TOLL FREE 800-232-3787 FAX NO. 218-233-9548 E-MAIL ADDRESS jimmc@bertsonline.com
PRICE SCHEDULE 8.0 Sander VENDOR TO PROVIDE FOLLOWING DETAIL Sander - Make and Model Type of sander Warranty Info Swenson V-box Spreaders Hydraulic & Electric V-Box Hydraulic Insert Sanders 2 Years from in service date TOTAL PRICE: See Attached Schedule 8.0-4 8.1 - Installation of Sander PRICE See Attached Schedule 8.0-4 8.2 - List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use as many numbers as needed. See Attached Schedule 8.0-4 Cost per loaded mile for delivery of sander $ 2.00 VENDOR: Bert's Truck Equipment of Moorhead, Inc CONTACT PERSON: Jim McLaughlin ADDRESS: 3804 Hwy 75 North, Po Box 336, Moorhead MN 56561-0336 PHONE NO.:218-233-8681 TOLL FREE:800-232-3787 FAX NO. 218-233-9548 E-MAIL ADDRESS: jimmc@bertsonline.com
Bert's Truck Equipment of Moorhead, Inc 8.0-4 Price Schedule for Bonnell V-Box Spreaders 23-Jan-17 Bonnell V-Box Spreaders Bonnell V-Box construction: CS models, 10-gauge carbon steel sides and ends, S2 models, 12-gauge 201 stainless steel sides and ends. Sides sloped 45, 82 body width, 50-62 body height (other heights available), CS models, 7-gauge longsills, 7-gauge replaceable floor. S2 models, 10-gauge longsills, 10-gauge replaceable floor. 24 wide conveyor longsills of 7-gauge steel, 22.5 wide pintle type conveyor with 3/8 x 1-1/2 crossbars every 4.5, 1-1/2 drive shaft, 8-tooth sprockets, 50:1 gear box drive, 1-1/2 idler shaft spring loaded & adjusted. Standard duty top screens. Optional inverted-v - not included. 18 carbon steel spinner disc with replaceable fins. Note: CS and S2 models include 18 carbon steel disc. Swing up spinner assembly with 4 external baffles and 2 internal baffles. Note: CS models are carbon steel, S2 units are 201 stainless steel Carbon steel units - painted orange - standard Stainless steel units - not painted. Note: most bolt on items are painted black - standard. Section Item MODEL NUMBER MATERIAL LENGTH HEIGHT CA/CT CUBIC YARDS WEIGHT Price Carbon Steel Price 201 Stainless Steel 8.0-4 0.01 BV-950 (CS/S2) 9 50 72 4.9 2,220 $ 8,101.00 $ 11,681.00 8.0-4 0.02 BV-956 (CS/S2) 9 56 72 6 2,305 $ 8,200.00 $ 11,837.00 8.0-4 0.03 BV-962 (CS/S2) 9 62 72 7.1 2,395 $ 8,296.00 $ 11,989.00 8.0-4 0.04 BV-1050 (CS/S2) 10 50 84 5.5 2,385 $ 8,259.00 $ 12,000.00 8.0-4 0.05 BV-1056 (CS/S2) 10 56 84 6.7 2,480 $ 8,359.00 $ 12,161.00 8.0-4 0.06 BV-1062 (CS/S2) 10 62 84 7.9 2,575 $ 8,459.00 $ 12,318.00 8.0-4 0.07 BV-1150 (CS/S2) 11 50 96 6.1 2,525 $ 8,649.00 $ 12,507.00 8.0-4 0.08 BV-1156 (CS/S2) 11 56 96 7.4 2,625 $ 8,752.00 $ 12,673.00 8.0-4 0.09 BV-1162 (CS/S2) 11 62 96 8.7 2,725 $ 8,857.00 $ 12,836.00 8.0-4 0.10 BV-1250 (CS/S2) 12 50 108 6.6 2,695 $ 8,916.00 $ 12,966.00 8.0-4 0.11 BV-1256 (CS/S2) 12 56 108 8.1 2,800 $ 9,178.00 $ 13,138.00 8.0-4 0.12 BV-1262 (CS/S2) 12 62 108 9.5 2,905 $ 9,132.00 $ 13,312.00 8.0-4 0.13 BV-1350 (CS/S2) 13 50 96 7 2,835 $ 9,463.00 $ 13,564.00 8.0-4 0.14 BV-1356 (CS/S2) 13 56 96 8.6 2,945 $ 9,581.00 $ 13,747.00 8.0-4 0.15 BV-1362 (CS/S2) 13 62 96 10.4 3,055 $ 9,698.00 $ 13,928.00 8.0-4 0.16 BV-1450 (CS/S2) 14 50 108 7.8 3,005 $ 10,151.00 $ 14,141.00 8.0-4 0.17 BV-1456 (CS/S2) 14 56 108 9.5 3,120 $ 10,277.00 $ 14,342.00 8.0-4 0.18 BV-1462 (CS/S2) 14 62 108 11.2 3,235 $ 10,408.00 $ 14,524.00 8.0-4 0.19 BV-1550 (CS/S2) 15 50 120 8.3 3,145 $ 10,441.00 $ 14,715.00 8.0-4 0.20 BV-1556 (CS/S2) 15 56 120 10.2 3,265 $ 10,571.00 $ 14,913.00 8.0-4 0.21 BV-1562 (CS/S2) 15 62 120 12 3,385 $ 10,703.00 $ 15,114.00 Auger Units 8.0-4 0.22 BVA-948 (CS/S2) 9 48 72 5 2,215 $ 8,725.00 $ 12,494.00 8.0-4 0.23 BVA-954 (CS/S2) 9 54 72 6.1 2,305 $ 9,066.00 $ 12,658.00 8.0-4 0.24 BVA-960 (CS/S2) 9 60 72 7.3 2,395 $ 9,171.00 $ 12,818.00 8.0-4 0.25 BVA-1048 (CS/S2) 10 48 84 5.5 2,385 $ 9,134.00 $ 12,831.00 8.0-4 0.26 BVA-1054 (CS/S2) 10 54 84 6.8 2,480 $ 9,236.00 $ 13,000.00 8.0-4 0.27 BVA-1060 (CS/S2) 10 60 84 8.2 2,575 $ 9,337.00 $ 13,167.00
8.0-4 0.28 BVA-1148 (CS/S2) 11 48 96 6.1 2,525 $ 9,528.00 $ 13,369.00 8.0-4 0.29 BVA-1154 (CS/S2) 11 54 96 7.5 2,625 $ 9,632.00 $ 13,544.00 8.0-4 0.30 BVA-1160 (CS/S2) 11 60 96 8.9 2,725 $ 9,739.00 $ 13,716.00 8.0-4 0.31 BVA-1248 (CS/S2) 12 48 108 6.7 2,695 $ 9,837.00 $ 13,853.00 8.0-4 0.32 BVA-1254 (CS/S2) 12 54 108 8.3 2,800 $ 9,947.00 $ 14,036.00 8.0-4 0.33 BVA-1260 (CS/S2) 12 60 108 9.8 2,905 $ 10,056.00 $ 14,221.00 8.0-4 0.34 BVA-1348 (CS/S2) 13 48 96 6.9 2,835 $ 10,390.00 $ 14,582.00 8.0-4 0.35 BVA-1354 (CS/S2) 13 54 96 8.6 2,945 $ 10,509.00 $ 14,681.00 8.0-4 0.36 BVA-1360 (CS/S2) 13 60 96 10.3 3,055 $ 10,628.00 $ 14,891.00 8.0-4 0.37 BVA-1448 (CS/S2) 14 48 108 7.4 3,005 $ 10,910.00 $ 15,100.00 8.0-4 0.38 BVA-1454 (CS/S2) 14 54 108 9.2 3,120 $ 11,053.00 $ 15,302.00 8.0-4 0.39 BVA-1460 (CS/S2) 14 60 108 11.1 3,235 $ 11,181.00 $ 15,504.00 8.0-4 0.40 BVA-1548 (CS/S2) 15 48 120 7.9 3,145 $ 11,181.00 $ 15,569.00 8.0-4 0.41 BVA-1554 (CS/S2) 15 54 120 9.6 3,265 $ 11,343.00 $ 15,778.00 8.0-4 0.42 BVA-1560 (CS/S2) 15 60 120 11.5 3,385 $ 11,474.00 $ 15,989.00 8.1 Installtion of Bonnell Spreaders $ 635.00 Options 8.2 Light Bar Assembly. Plastic/poly enclosure - 69 wide, bolt on (4) L.E.D. $ 666.00 stop/turn/taillights and ICC ID Marker lights, wire harness with pigtail and 7-prong trailer plug 8.21 Light Bar Assembly. Stainless steel enclosure - 78 wide, bolt on (4) L.E.D. $ 956.00 stop/turn/taillights and ICC ID Marker lights, wire harness with pigtail and 7-prong trailer plug 8.22 BV2-002313 900 Leg Storage Stand - Carbon Steel Only (black) (limited to spreader models) $ 4,195.00 8.23 BON-003373 15 Short hose kit includes Pioneer 4004PH $ 150.00 Quick-disconnect couplers (two sets) and (four) 1/2 hoses. 8.24 Sensored Motor SM Conveyor-Sensored motor (in lieu of standard motor) $ 320.00 (Not available on BVA model) Bonnell recommends using external sensors PREWET OPTIONS: 8.25 LDS-TG100-EMB/NQF 215 Electric Spray System with one 100-gallon polyethylene tank and $ 3,095.00 mounting hardware for under tailgate spreader. Carbon steel hardware 8.26 LDS-VB90-EMB/NQF 125 Electric Spray System with one 90-gallon polyethylene tank and $ 2,227.00 mounting hardware for V-Box spreader. Carbon steel hardware 8.27 LDS-VB135-EMB/NQF 170 Electric Spray System with one 135-gallon polyethylene tank and $ 2,305.00 mounting hardware for V-Box spreader. Carbon steel hardware 8.28 LDS-VB270-EMB/NQF 340 Electric Spray System with two 135-gallon polyethylene tank and $ 2,725.00 mounting hardware for V-Box spreader. Carbon steel hardware 8.29 INSTALLATION Factory installation of V-Box Pre-Wet System 1-Tank System $ 346.00 8.3 2-Tank System $ 390.00 VENDOR Bert's Truck Equipment, Inc. CONTACT PERSON Jim McLaughlin ADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN 56561-0336 PHONE NO. 218-233-8681 TOLL FREE 800-232-3787 FAX NO. 218-233-9548 E-MAIL ADDRESS jimmc@bertsonline.com