TITGEMEYER n Superstructure Systems
All rights reserved. The technical data quoted in this catalogue, performance descrip - tions, recommendations and instructions e.g. for the installation of the components available from us, are without liability. These are based on our experience. Claims against us as a consequence are expressly excluded as much of the application of our goods remains outside our direct influence. It is a fundamental obligation of the user to ascertain and to decide wether the goods provided by us are appropriate for a particular application. This catalogue is our intellectual property! Disclosure to third parties is prohibited. Reproduction even in part as well as use of our illustrations and TITGEMEYER part-numbering systems is only permitted with our express permission in writing. Subject to change. Supply of goods is in conformity with our delivery and payment conditions. Gebr. TITGEMEYER GmbH & Co. KG Osnabrück
Over 00 years of tradition and expertise At the turn of the century, an ironware wholesale business was established by the two Titgemeyer brothers, Adolf and Fritz, in their hometown of Melle. A few years later, offices were opened in the neighbouring town of Osnabrück. Since then, the business enterprise group TITGEMEYER has continuously developed and is totday a leader in the fields of fastening technology and commercial vehicle equipment. The medium sized family organization is now led by the third generation - always with the aim of supplying the optimum solution for the customer - from single fixings, right up to complex vehicle systems. Fastening Technology The more varied the requirements, the more individual our solution is. The result: an extensive product range of fastening technology systems and solutions. New products are constantly being developed, as the manufacturing industry demands specially designed solutions. TITGEMEYER introduced the POP blind rivet to the German market. Its application revolutionised traditional fastening technology. The TITGEMEYER fastening technology product range Blind Rivets Threaded Inserts Assembly Systems Installation Tools Sealants and Adhesives Vehicle components with style The ideas and wishes of our customers are our benchmark. That is why we carefully develop approved products and systems for the manufacture of modern commercial vehicles. Safety, cost effectiveness and the environment these requirements are all satisfied by our product range. The original and innovative body kit system, GETO Van, is only one of many system solutions available from TITGEMEYER today. The TITGEMEYER commercial vehicle product range Body Kits Chassis Technology Bodywork Components Bodywork Systems Phone: +49 (0)5 4/58 22-0 Fax: +49 (0)5 4/58 22-990 email: export@titgemeyer.com 3
4
Content Superstructure Systems Curtainderisider kits Standard front without lifting roof Standard front with external lifting roof Standard front with internal lifting roof Standard front and Gate Gate without lifting roof Gate with lifting roof Side wall components / Curtain components Side wall components / Slide stanchion Side wall components / Curtain pole extrusion Side wall components / ifting roof systems Side wall components Steel-Series...24.0.0. Aluminium-Series...24.0.0.2 Individual parts...24.0.0.3 Steel-Series...24.0.02. Steel-Series...24.0.03. Accessories...24.0.04. Steel-Series...24.02.0. Aluminium-Series...24.02.0.2 Individual parts...24.02.0.3 Steel-Series...24.02.02. Tensioners...24.03.0. Ratchet...24.03.02. Adaico...24.04.0. Hesterberg...24.04.02. Versus...24.04.03. Pole extrusion...24.05.0. Slot-in profile...24.05.0.4 iftmaster...24.06.0. Axces...24.06.02. Accessories...24.07.0. 5
Content 228 20 04...24.0.0.3 228 20 222...24.0.0.4 228 90 04...24.0.0.3 228 90 222...24.0.0.4 228 95 04...24.0.0.3 228 95 222...24.0.0.4 228 20 04...24.0.0.3 228 20 222...24.0.0.4 228 260 04...24.0.0.3 228 260 222...24.0.0.4 24 784 000...24.0.04.2 24 950 003...24.02.0.3 24 963 00...24.0.0.3 24 963 00...24.0.0.4 24 97 255...24.02.0.3 24 976 255...24.02.0.3 24 989 000...24.0.0.3 24 989 000...24.0.0.4 24 995 000...24.02.0.3 24 995 000...24.02.0.4 24 997 000...24.02.0.3 24 997 000...24.02.0.4 246 00 000...24.0.0.3 246 00 000...24.0.0.4 246 002 000...24.0.0.3 246 002 000...24.0.0.4 246 00 300...24.0.0.3 246 00 300...24.0.0.4 246 0 300...24.0.0.3 246 0 300...24.0.0.4 246 03 300...24.0.0.3 246 04 000...24.0.0.3 246 04 000...24.0.0.4 246 020 000...24.0.0.4 246 022 000...24.0.0.4 246 030 350...24.0.0.3 246 030 350...24.0.0.4 246 040 000...24.0.0.3 246 040 000...24.0.0.4 246 040 000...24.0.04. 246 040 000...24.02.0.3 246 04 000...24.0.0.3 246 04 000...24.0.0.4 246 04 000...24.0.04. 246 04 000...24.02.0.3 246 042 000...24.0.0.3 246 042 000...24.0.0.4 246 042 000...24.0.04. 246 042 000...24.02.0.3 246 043 000...24.0.0.3 246 043 000...24.0.0.4 246 043 000...24.0.04. 246 043 000...24.02.0.3 246 049 000...24.0.0.3 246 230 00...24.0.0.4 246 23 00...24.0.0.3 246 502 000...24.02.0.3 246 507 000...24.02.0.3 246 508 000...24.02.0.3 246 5 000...24.0.0.3 246 52 000...24.0.0.3 246 523 350...24.02.0.3 246 523 35...24.02.0.3 250 023 000...24.04.03. 250 024 000...24.04.03. 250 998 06...24.04.03.2 250 998 07...24.04.03.3 250 998 08...24.04.03.3 250 998 023...24.04.03.2 250 998 024...24.04.03.3 50 340 000...24.07.0.2 606 73 000...24.07.0. 606 26 000...24.07.0. 606 29 780...24.07.0. 606 26 009...24.07.0.3 606 26 04...24.07.0.3 606 26 020...24.07.0.3 606 26 056...24.07.0.3 606 263 009...24.07.0.3 606 263 04...24.07.0.3 606 263 020...24.07.0.3 606 302 000...24.07.0.2 606 304 000...24.07.0.3 606 350 00...24.04.0. 606 356 00...24.04.0.2 606 356 002...24.04.0.2 606 358 00...24.04.0.3 606 358 002...24.04.0.3 606 359 00...24.04.0.2 606 38 00...24.07.0.2 606 502 000...24.03.02. 606 503 000...24.03.02. 606 504 000...24.03.02.2 606 505 000...24.03.02.2 606 506 000...24.03.02.2 606 507 000...24.03.02.2 606 56 00...24.03.02. 606 57 00...24.03.02. 606 58 000...24.03.02.2 606 532 00...24.03.0. 606 534 000...24.03.0.3 606 535 000...24.03.0.3 606 536 00...24.03.0. 606 544 00...24.03.0.2 606 545 000...24.03.0.2 606 55 000...24.03.0.4 606 554 000...24.03.0.4 606 555 000...24.03.0.4 606 557 289...24.05.0.2 606 557 340...24.05.0.2 606 558 339...24.05.0.2 606 562 000...24.05.0.3 606 563 000...24.05.0.2 606 564 000...24.05.0.3 606 565 000...24.05.0. 606 567 300...24.05.0. 606 567 330...24.05.0. 606 568 300...24.05.0.3 606 568 330...24.05.0.3 606 569 300...24.05.0.4 606 569 330...24.05.0.4 606 577 000...24.05.0.2 606 663 000...24.06.0. 606 76 000...24.06.02. 606 720 000...24.06.02. 607 00 000...24.04.02.2 607 0 000...24.04.02.2 607 0 000...24.04.02.0 607 02 000...24.04.02.9 607 02 000...24.04.02.0 607 02 000...24.04.02. 607 03 000...24.04.02.9 607 03 000...24.04.02.0 607 03 000...24.04.02. 607 04 000...24.04.02. 607 05 000...24.04.02.4 607 05 000...24.04.02.0 607 06 000...24.04.02.4 607 06 000...24.04.02.5 607 06 000...24.04.02.9 607 06 000...24.04.02.0 607 07 000...24.04.02.5 607 08 000...24.04.02. 607 0 000...24.04.02.5 607 000...24.04.02.3 607 2 000...24.04.02.3 607 3 000...24.04.02.2 607 4 000...24.04.02.2 607 6 000...24.04.02. 607 7 000...24.04.02. 607 7 000...24.04.02.9 607 2 000...24.04.02.2 607 30 000...24.04.02.2 607 30 00...24.04.02.2 607 30 002...24.04.02.3 607 32 000...24.04.02.4 607 32 000...24.04.02.5 6
24.0.0. Standard front without lifting roof Steel-Series Cantrail bracket Suitable for aluminium cantrails with an overall height of 55 or 00 mm Optional Centre stanchions on request, in the case of DIN EN 2642, standard front, supplied as standard Corner stanchion profile KT-coated, black Filling Plywood or primed aluminium profiles Anchor point in accordance with DIN EN 2640 Diameter: 52 mm Item: 040 mm from the lower edge post Optional Pockets The number and position is based on a 50 mm grid. The side loading length is not affected. Page 24.0.04. Reinforcement angle for bolts Optional Batten store Kick plate Internal, 625 mm high Optional Double bracket for bulkheads with centre posts Master gauge for bolts integrated in the column
24.0.0.2 Standard front without lifting roof Aluminium-Series Cantrail bracket Suitable for aluminium cantrails with an overall height 00 mm 85 28 65 35 20 30 Corner stanchion profile KT-coated, black Filling primed aluminium profiles Anchor point in accordance with DIN EN 2640 Diameter: 52 mm Item: 040 mm from the lower edge post Support for slot-in boards The number and position is based on a 50 mm grid. The side loading length is not affected. Page 24.0.04.2 Reinforcement angle for bolts Master gauge for bolts integrated in the column Kick plate Internal, 625 mm high
24.0.0.3 Standard front without lifting roof Individual parts GETO Sider Curtainsider bulkhead with centre post To retrofit a centre post, you will need the following items: Items: 3, 4, 7, 6 6 3 / 5 7 9 4 / 5 0 8 2 3 4 4 2 3 6 Overview of individual parts GETO Sider Curtainsider bulkhead with centre post Item Description Bulkhead column ST III 3000 mm right 2 Bulkhead column ST III 3000 mm left 3 Middle column ST III 3000 mm 4 Bulkhead mounting bracket ST III without lifting roof right 5 Bulkhead mounting bracket ST III without lifting roof left 6 Bulkhead strut ST III - C 00 x 2550 mm, for centre post 7 U bracket for fasteners ST III 8 Hitches ST III right and left 3500 mm 9 Batten pocket ST III right 0 Batten pocket ST III left Batten storage ST III right 2 Batten storage ST III left 3 "Z profile" bottom member for bulkhead ST III 4 Reinforcement ST III length 00 mm right and left 5 Sliding arm M0, galvanised 6 Kick strip 058 x 625 x 2 mm, galvanised, for Al panel 72 Aluminium angle bracket 20 x 30 x 2500 mm, canted Not shown 2 S25: Top end profile 5 x 056 mm, RA 900 Not shown 2 S25: Bottom end profile 85 mm x 056 mm, RA 900 Not shown 2 S25: Centre profile 75 x 056 mm, RA 900 Not shown 2 S25: Centre profile 00 x 056 mm, RA 900 Not shown 2 S25: Centre profile 200 x 056 mm, RA 900 For versions without a centre post, the bulkhead strut can be used once the centre mounting hole has been drilled. 2 For aluminium bulkhead panels Each 2 3 3 2 3 4 2 4 2 2 as needed as needed as needed Article No. 246 00 300 246 0 300 246 03 300 246 00 000 246 002 000 246 5 000 246 049 000 246 030 350 246 040 000 246 04 000 246 042 000 246 043 000 246 52 000 246 04 000 24 963 00 246 23 00 24 989 000 228 20 04 228 260 04 228 20 04 228 90 04 228 95 04
24.0.0.4 Standard front without lifting roof Individual parts GETO Sider Curtainsider bulkhead without centre post 5 3 / 3 5 7 4 / 3 8 2 6 2 9 2 0 4 Overview of individual parts GETO Sider Curtainsider bulkhead without centre post Item 2 3 4 5 6 7 8 9 0 2 3 4 5 Not shown 2 Not shown 2 Not shown 2 Not shown 2 Not shown 2 Description Bulkhead column ST III 3000 mm right Bulkhead column ST III 3000 mm left Bulkhead mounting bracket ST III without lifting roof right Bulkhead mounting bracket ST III without lifting roof left Bulkhead strut C 00 x 2550 mm Hitches ST III right and left 3500 mm Batten pocket ST III right Batten pocket ST III left Batten storage ST III right Batten storage ST III left Z profile bottom member, -piece, for bulkhead ST III Reinforcement ST III length 00 mm right and left Sliding arm M0, galvanised Kick strip 2240 x 625 x 2 mm, galvanised, for Al panel Aluminium angle bracket 20 x 30 x 2500 mm, canted S25: Top end profile 5 x 2236 mm, RA 900 S25: Bottom end profile 85 mm x 2236 mm, RA 900 S25: Centre profile 75 x 2236 mm, RA 900 S25: Centre profile 00 x 2236 mm, RA 900 S25: Centre profile 200 x 2236 mm, RA 900 Each 2 3 3 2 4 2 as needed as needed as needed Article No. 246 00 300 246 0 300 246 00 000 246 002 000 246 020 000 246 030 350 246 040 000 246 04 000 246 042 000 246 043 000 246 022 000 246 04 000 24 963 00 246 230 00 24 989 000 228 20 222 228 260 222 228 20 222 228 90 222 228 95 222
24.0.02. Standard front with external lifting roof Steel-Series Cantrail bracket Suitable for aluminium cantrails with an overall height of 00 mm Alternatively: profile with a different overall height of 75 mm. Optional Centre stanchions on request, in the case of DIN EN 2642, standard front, supplied as standard Corner stanchion profile KT-coated, black Filling Plywood or primed aluminium profiles Anchor point in accordance with DIN EN 2640 Diameter: 52 mm Position: 040 mm from the lower post edge Manual lifting roof system iftmaster 770N maximum lift 400 mm Axces maximum lift 500 mm Optional Pockets The quantity and position are based on a 50 mm grid. The side loading length is not affected. Page 24.0.04. Reinforcement angle for bolts Optional Batten store Guard plate Internal, 625 mm high Double brackets for bulkheads with centre posts Master gauge for bolts integrated into the column
24.0.02.2 Standard front with external lifting roof Steel-Series
24.0.03. Standard front with internal lifting roof Steel-Series Cantrail bracket Suitable for aluminium cantrails with an overall height of 00 mm Alternatively: profile with a different overall height of 75 mm. Optional Centre stanchions on request, in the case of DIN EN 2642, standard front, supplied as standard Corner stanchion profile KT-coated, black Filling Plywood or primed aluminium profiles Anchor point in accordance with DIN EN 2640 Diameter: 52 mm Position: 040 mm from the lower edge posts Manual lifting roof system iftmaster 770N maximum lift 400 mm Axces maximum lift 500 mm Optional Pockets The quantity and position are based on a 50 mm grid. Page 24.0.04. Reinforcement angle for bolts Optional Batten store Guard plate Internal, 625 mm high Double brackets for bulkheads with centre posts Master gauge for bolts integrated into the column
24.0.03.2 Standard front with internal lifting roof Steel-Series
24.0.04. Standard front and Gate Accessories Pockets Fitted on request using a 50 mm grid sheet Surface: electro galvanised Article No. 246 04 000 left 246 040 000 right 20 00 35 5,5 2 28 28 Batten store Fitted on request sheet Surface: electro galvanised Article No. 246 043 000 left 246 042 000 right 20 5 200 5 250 5 500 2,5 28 2 28
24.0.04.2 Standard front and Gate Accessories Support for slot-in boards Fitted on request using a 50 mm grid sheet Surface: electro galvanised Article No. 24 784 000
24.02.0. Gate without lifting roof Steel-Series Roof strap fastening Suitable for aluminium roof straps with an overall height of 55 or 00 mm Corner post profile KT-coated, black Anchor point Diagonal bracing 2 mm rod steel Optional Pockets The quantity and position are based on a 50 mm grid. The side loading length is not affected. Page 24.0.04. Anchor point Diagonal bracing Diameter 30 mm Optional Batten store Master gauge for bolts integrated into the column Reinforcement angle
24.02.0.2 Gate without lifting roof Aluminium-Series Roof strap fastening Suitable for aluminium roof straps with an overall height of 00 mm Corner post profile Aluminium, RA 900 Anchor point Diagonal bracing 2 mm rod steel Optional Pockets The quantity and position are based on a 50 mm grid. The side loading length is not affected. Page 24.0.04. Anchor point Diagonal bracing Diameter 30 mm Master gauge for bolts integrated into the column Reinforcement angle
24.02.0.3 Gate without lifting roof Individual parts GETO Sider Curtainsider rear frame without integrated components 2 / 3 3 / 6 5 7 4 / 6 8 9 2 0 Overview of individual parts GETO Sider Curtainsider rear frame without integrated components Item 2 3 4 5 Alternative to item 5 6 7 8 9 0 2 3 4 Description Rear frame post 26 x 35 x 3500 mm right Rear frame post 26 x 35 x 3500 mm left Rear frame mounting bracket ST III without lifting roof right Rear frame mounting bracket ST III without lifting roof left Rear frame member C 20 x 2500 mm sliding roof Rear frame member C 00 x 2500 mm fixed roof (Item: not needed for this version) Sliding arm for rear frame ST III Batten pockets ST III right Batten pockets ST III left Batten storage ST III right Batten storage ST III left Centre bolt, electrogalvanised Rear frame cover rubber, black 2800 mm Aluminium cover strip for Item 2 2800 mm Rear frame member C 20 x 2500 mm fixed roof Each as needed 2 3 3 2 Article No. 246 523 350 246 523 35 246 508 000 246 507 000 24 97 255 24 976 255 246 502 000 246 040 000 246 04 000 246 042 000 246 043 000 24 950 003 24 995 000 24 997 000
24.02.0.4 Gate without lifting roof Individual parts Rubber cover profile on rear top end member Adjust the rubber cover profile incl. attachment rail after laying the roof sheet, then drill holes and mount using blind rivets. The sides of the front member will need to be adapted to match the local structural conditions. Rubber cover profile black ength: 2800 mm Article No. 24 995 000 Cover strip black ength: 2800 mm Article No. 24 997 000
24.02.02. Gate with lifting roof Steel-Series Roof strap fastening Suitable for aluminium roof straps with an overall height of 55 or 00 mm. With a "high profile" the overall height is 75 mm. Corner post profile KT-coated, black Anchor point Diagonal bracing 2 mm rod steel alternative "high profile" Optional Pockets The quantity and position are based on a 50 mm grid. The side loading length is not affected. Page 24.0.04. Manual lifting roof system iftmaster 770N maximum lift 400 mm Axces maximum lift 500 mm Anchor point Diagonal bracing Diameter 30 mm Optional Batten store Master gauge for bolts integrated into the column Reinforcement angle
24.02.02.2 Gate with lifting roof Steel-Series
24.03.0. Side wall components / Curtain components Tensioners Curtainsider tensioners mini-30 With square drive, 2 mm Closed housing Self-locking For use on the left or right Surface: primed Weight: approx. 0.55 kg/each Article No. 606 532 00 Accessories Crank handle, Article No. 606 555 000 ower curta pole extrusion adapter, Article No. 606 563 000 Curta pole extrusion with pressed-on adapter, Article No. 606 557 290 and 606 557 340 Curtainsider tensioners Compact 73 x 40 With slot drive Closed housing Self-locking For use on the left or right Surface: primed Weight: approx. 0.8 kg/each Article No. 606 536 002 40 5 ø 25 0 2 23 4 +0,5 0 23 29 ø 7 3 6 6 6 M 6 6 Accessories Crank handle, Article No. 606 55 000 ower curta pole extrusion adapter, Article No. 606 562 000/ 606 577 000 Curta pole extrusion with pressed-on adapter, Article No. 606 558 339 40 73
24.03.0.2 Side wall components / Curtain components Tensioners Curtainsider tensioners Compact 78 x 50 With slot drive Closed housing Self-locking For use on the left or right Surface: primed Weight: approx.. kg/each Article No. 606 544 00 Accessories Crank handle, Article No. 606 555 000 ower curta pole extrusion adapter, Article No. 606 562 000 / 606 577 000 Curta pole extrusion with pressed-on adapter, Article No. 606 558 339 Curtainsider cardan tensioners Jumbo With 2 mm square drive Closed housing Self-locking Symmetrical design For use on the left or right With handwheel operation Surface: galvanised Weight: approx 4. kg/each Article No. 606 545 000 Accessories Handwheel, Article No. 606 554 000 ower curta pole extrusion adapter, Article No. 606 563 000 Curta pole extrusion with pressed-on adapter, Article No. 606 557 290 and 606 557 340
24.03.0.3 Side wall components / Curtain components Tensioners Curtainsider tensioners Compact 78 X 40 With slot drive Semi-open Self-locking For use on the left or right Surface: galvanised Weight: approx. 0.8 kg/each Article No. 606 535 000 Accessories Crank handle, Article No. 606 55 000 ower curta pole extrusion adapter, ArticleNo. 606 562 000 / 606 577 000 Curta pole extrusion with pressed-on adapter, Article No. 606 558 289 and 606 558 339 Curtainsider tensioners Compact 78 x 40 With square drive, 2 mm Semi-open Self-locking For use on the left or right Surface: galvanised Weight: approx. 0.8 kg/each Article No. 606 534 000 Accessories Crank handle, Article No. 606 55 000 ower curta pole extrusion adapter, Article No. 606 563 000 Curta pole extrusion with pressed-on adapter, Article No. 606 557 340 Tensioner, bolted, Article No. 606 534 00 / 606 534 002 Tensioner holder, Article No. 246 520 000 / 246 520 00
24.03.0.4 Side wall components / Curtain components Tensioners Curtainsider handwheel with dowel pin Fits clamping mechanism, Article No. 606 545 000 Material: Aluminium Weight: approx. 0.24 kg/each Article No.606 554 000 Curtainsider crank handle With 4 mm square drive Fits tensioners, Article No. 606 534 000 / 606 534 00 / 606 534 002 and 606 535 000 / 606 535 00 / 606 535 002 and 606 536 002 Surface: galvanised Weight: approx. 0.45 kg/each Article No. 606 55 000 Curtainsider crank handle With two square drives Size of open-end 0 mm and 4 mm Fits tensioners, Article No. 606 532 00 / 606 544 00 Surface: galvanised Weight: approx. 0.3 kg/each Article No. 606 555 000
24.03.02. Side wall components / Curtain components Ratchet Curtainsider ratchet tensioner 40 mm deep With slot drive Surface: galvanised Weight: approx. 2.2 kg/each Article No. 606 56 00 for front right / rear left 606 57 00 for front left / rear right Accessories Bottom curtain pole extrusion adapter, Article No. 606 562 000 Curtain pole extrusion with press-on adapter, Article No. 606 558 339 Tensioner holder, Article No. 246 520 000 / 246 520 00 Carry bag for ratchet tensioner, Article No. 246 52 000 / 246 52 00 Figure on the left Curtainsider ratchet tensioner 40 mm deep With 2 mm square drive Material: Cast steel Surface: Dacromet coating Weight: approx..55 kg/each Article No. 606 502 000 for front right / rear left 606 503 000 for front left / rear right Accessories Bottom curtain pole extrusion adapter, Article No. 606 562 000 Curtain pole extrusion with press-on adapter, Article No. 606 557 290, 606 557 340 Tensioner holder, Article No. 246 520 000 / 246 520 00 Carry bag for ratchet tensioner, Article No. 246 52 000 / 246 52 00 Figure on the left 242 520 000 242 520 00 246 52 000 246 52 00
24.03.02.2 Side wall components / Curtain components Ratchet Curtainsider ratchet tensioner 40 mm deep With slot drive Material: Cast steel Surface: Dacromet coating Weight: approx..55 kg/each Article No. 606 504 000 for front right / rear left 606 505 000 for front left / rear right Accessories ower curta pole extrusion adapter, Article No. 606 562 000 / 606 577 000 Curta pole extrusion with pressed-on adapter, Article No. 606 558 339 Figure on the left Curtainsider universal ratchet tensioner 47 mm deep With slot drive Material: 606 506 000 - Steel, galvanised 606 58 000 - Stainless steel Weight: approx..2 kg/each Article No. 606 506 000 Steel 606 58 000 Stainless steel Accessories ower curta pole extrusion adapter, Article No. 606 562 000 Curta pole extrusion with pressed-on adapter, Article No. 606 558 339 Curtainsider universal ratchet tensioner 4 mm deep With square drive, galvanised Weight: approx..2 kg/each Article No. 606 507 000 Accessories ower curta pole extrusion adapter, Aricle No. 606 563 000 Curta pole extrusion with pressed-on adapter, Article No. 606 557 340
24.04.0. Side wall components / Slide stanchion Adaico Curtainsider slide stanchion Adaico 3000 mm With solid wedge made of full steel Without chassis pocket, cap profile made of QStE 380 Surface: KT-coated Colour: black Weight: approx 22.5 kg/each Article No. 606 350 00 Accessories Curtainsider chassis pocket, Article No. 606 359 00 Batten pocket, Article No. 606 356 00 and 606 356 002 Batten store, Article No. 606 358 00 and 606 358 002
24.04.0.2 Side wall components / Slide stanchion Adaico Chassis pocket For Adaico slide stanchion, Article No. 606 350 00 and 606 35 000 Surface: KT-coated Colour: black Weight: approx. 0.65 kg/each Article No. 606 359 00 Batten pocket For Adaico slide stanchion, Article No. 606 350 00 and 606 35 000 Surface: KT-coated Colour: black Weight: approx 0.2 kg/each Article No. 606 356 00 left 606 356 002 right
24.04.0.3 Side wall components / Slide stanchion Adaico Batten store For Adaico slide stanchion, Article No. 606 350 00 and 606 35 000 Surface: primed Weight: approx. 0.4 kg/each Article No. 606 358 00 left 606 358 002 right
24.04.0.4 Side wall components / Slide stanchion Adaico
24.04.02. Side wall components / Slide stanchion Hesterberg Curtainsider slide stanchion Code Hestal 2475.5 mm long CS stanchion 900 With stores Without pockets Surface: KT-coated Colour: black Weight: approx. 2.6 kg/each Article No. 607 7 000 Curtainsider slide stanchion Code Hestal 2475.5 mm long CS stanchion 900 Without stores Without pockets Surface: KT-coated Colour: black Weight: approx. 9.5 kg/each Article No. 607 6 000 Accessories Batten pocket, Article No. 607 03 000 Batten store, Article No. 607 04 000 Chassis bracket, Article No. 607 02 000 Spare parts Safety slide, Article No. 607 30 003 Pressure spring for safety slide, Article No. 607 30 004 Rivet, Article No. 607 30 004 Modifications in keeping with current version of EN 2642:2007 As opposed to EN 2642:2002: Box bodies classified by strength rating Code standard bodywork Code X reinforced bodywork
24.04.02.2 Side wall components / Slide stanchion Hesterberg Curtainsider slide stanchion Code X Hestal 2475 mm long CS stanchion 90 With stores Without pockets Surface: KT-coated Colour: black Weight: approx. 23. kg/each Article No. 607 0 000 Curtainsider slide stanchion Code X Hestal 2475 mm long CS stanchion 90 Without stores Without pockets Surface: KT-coated Colour: black Weight: approx. 2.0 kg/each Article No. 607 00 000 Accessories Batten pocket, Article No. 607 03 000 Batten store, Article No. 607 04 000 Chassis bracket, Article No. 607 02 000
24.04.02.3 Side wall components / Slide stanchionn Hesterberg CURTAINSIDER slide stanchion long Code X Hestal 2825 mm long CS stanchion 90 With stores Without pockets Surface: KT-coated Colour: black Weight: approx. 24.7 kg/each Article No. 607 2 000 CURTAINSIDER slide stanchion long Code X Hestal 2825 mm long CS stanchion 90 Without stores Without pockets Surface: KT-coated Colour: black Weight: approx. 22.6 kg/each Article No. 607 000 Accessories Batten pocket, Article No. 607 03 000 Batten store, Article No. 607 04 000 Chassis bracket, Article No. 607 02 000
24.04.02.4 Side wall components / Slide stanchion Hesterberg Sliding pillar brackets (offset) Code and X Hestal For Quadro / Plano cantrails CS bracket 9. Surface: KT-coated Colour: black Weight: approx. 4.6 kg/each Article No. 607 06 000 Spare parts Role sword, Article No. 607 33 000 Sliding pillar brackets (straight) Code and X Hestal For Alto cantrails CS bracket 9.2 Surface: KT-coated Colour: black Weight: approx. 4.6 kg/each Article No. 607 32 000 Spare parts Role sword, Article No. 607 09 000 Reinforcing profile For X pillars, used in conjunction with a Hestal bracket Surface: KT-coated Colour: black Weight: approx. 3.5 kg/each Article No. 607 05 000
24.04.02.5 Side wall components / Slide stanchion Hesterberg Telescopic element for sliding pillars Complete with accessories For X pillars Hestal For Quadro cantrails CS bracket 92.5 Surface: KT-coated Colour: black Weight: approx. 2.5 kg/each Article No. 607 0 000 Telescopic element for sliding pillars Complete with accessories Hestal For Alto cantrails CS bracket 92.3 Surface: KT-coated Colour: black Weight: approx. 9.5 kg/each Article No. 607 07 000 Overview of sliding pillars and cantrails Telescopic element for sliding pillars (offset) Telescopic element for sliding pillars (straight) Sliding pillar brackets (offset) Sliding pillar brackets (straight) Quadro 607 0 000 With lifting roof Alto 607 07 000 Quadro 607 06 000 Without lifting roof Alto 607 32 000 Plano 607 06 000
24.04.02.6 Side wall components / Slide stanchion Hesterberg Shown with straight bracket and max. and min. length to be reached.
24.04.02.7 Side wall components / Slide stanchion Hesterberg Shown with telescoping element and max. and min. length to be reached.
24.04.02.8 Side wall components / Slide stanchion Hesterberg Shown with offset bracket and max. and min. length to be reached.
24.04.02.9 Side wall components / Slide stanchion Hesterberg Variomaster Code sliding pillar Variomaster Code sliding pillars are provided as individual items. They will need to be adapted to the local structural conditions and installed accordingly. 2 4 Overview of individual parts - Variomaster Code sliding pillar Pos. 2 3 4 Description CS sliding pillar 900- with depot on right and left, without batten pockets CS carriage, offset 9. CS chassis bracket 90.0 for welding or bolting Curtain bag, KT-coated Piece/ pillars 6 2 pillars 2 2 2 2 Article No. 607 7 000 607 06 000 607 02 000 607 03 000 3
24.04.02.0 Side wall components / Slide stanchion Hesterberg Variomaster Code X sliding pillar The Variomaster Type 90 sliding pillar (Code X) with reinforcing profile is required in order to meet the structural requirements of the certified application as defined in DIN EN 2642 Code X Annex A. 2 4 Overview of individual parts - Variomaster Code X sliding pillar Pos. Description Piece/ pillars 2 pillars Article No. 2 607 0 000 2 3 4 Not shown CS sliding pillar 900-X with depot on right and left, without batten pockets CS carriage, offset 9. CS chassis bracket 90.0 for welding or bolting Curtain bag, KT-coated Reinforcing profile 6 2 2 2 2 607 06 000 607 02 000 607 03 000 607 05 000 3
24.04.02. Side wall components / Slide stanchion Hesterberg Flat batten pocket Surface: KT-coated Colour: black Weight: approx. 0.27 kg/each Article No. 607 03 000 Flat batten storage Surface: KT-coated Colour: black Weight: approx..05 kg/each Article No. 607 04 000 Chassis bracket For bolting or welding CS stanchion 90 Weight: approx. 0.6 kg/each Article No. 607 02 000 Tracing of points CS stanchion 90 Weight: approx. 0,33 kg/each Article No. 607 08 000
24.04.02.2 Side wall components / Slide stanchion Hesterberg Chassis bracket bolting or welding CS stanchion 902 Weight: approx. 0.62 kg/each Article No. 607 2 000 Dropside catch 60 mm CS stanchion 900 Weight: approx. 0.5 kg/each Article No. 607 3 000 left 607 4 000 right Telescoping catch CS stanchion 900 Weight: approx. 0.2 kg/each Article No. 607 30 000 End-stop panel CS stanchion 900 Weight: approx. 0. kg/each Article No. 607 30 00
24.04.02.3 Side wall components / Slide stanchion Hesterberg Tensioning cable for telescoping element CS stanchion 900 Weight: approx. 0.06 kg/each Article No. 607 30 002
24.04.02.4 Side wall components / Slide stanchion Hesterberg
24.04.03. Side wall components / Slide stanchion Versus Curtainsider carriage for sliding pillars Versus Compatible with Quadro and Alto cantrails Surface: galvanised Weight: approx 4 kg/each Article No. 250 023 000 Curtainsider carriage for sliding pillars Versus Compatible with Alto 50 / 50V2 / 83 cantrails Surface: galvanised Weight: approx 3.8 kg/each Article No. 250 024 000
24.04.03.2 Side wall components / Slide stanchion Versus Curtainsider carriage for sliding pillars Versus Compatible with Quadro / Plano cantrails Material: Aluminium (with plastic rollers) Weight: approx. 0.89 kg/each Article No. 250 998 06 Curtainsider carriage for sliding pillars Versus Compatible with Alto / Kubus cantrails Material: Aluminium (with steel rollers) Weight: approx. 0.85 kg/each Article No. 250 998 023
24.04.03.3 Side wall components / Slide stanchion Versus Curtainsider carriage plate for sliding pillars Versus Compatible with Quadro / Plano / Kubus cantrails Surface: galvanised Weight: approx.38 kg/each Article No. 250 998 07 Curtainsider carriage plate for sliding pillars Versus Compatible with Alto 50 / 50V2 / 83 cantrails Surface: galvanised Weight: approx.38 kg/each Article No. 250 998 024 Fitting bolt with nut to install the the carriage plate and carriage Versus Weight: approx. 0.086 kg/each Article No. 250 998 08
24.04.03.4 Side wall components / Slide stanchion Versus
24.05.0. Side wall components / Curtain pole extrusion Pole extrusion Curtainsider curta pole extrusion adapter 27 top Fits curta pole extrusion, Article No. 606 567 300 / 606 567 330 Material: Brass Weight: approx 0.5 kg/eachh Article No. 606 565 000 Curtainsider push/draw/plug-in tube 27 With keder slot ength: 3000 / 3300 mm Material: Aluminium Surface: mill finish Weight: approx. 0.7 kg/m Article No. 606 567 300 3000 mm 606 567 330 3300 mm Accessories Upper curta pole extrusion adapter, Article No. 606 565 000 ower curta pole extrusion adapter, square, Article No. 606 563 000 ower curta pole extrusion adapter, Article No. 606 577 000
24.05.0.2 Side wall components / Curtain pole extrusion Pole extrusion Curtainsider curta pole extrusion adapter, bottom, 27 Fits: Push/draw type, Article No. 606 567 000 Tensioners, Article No. 606 532 00 / 606 534 000 / 606 534 00 / 606 534 002 / 606 545 000 Ratchets with 2 mm square drive, Article No. 605 502 000 / 606 503 000 Material: Brass Weight: approx 0.5 kg/each Article No. 606 563 000 Curtainsider curta pole extrusion adapter, bottom, 27 Fits: Push/draw type, Article No. 606 567 300 / 606 567 330 Tensioners, Article No. 606 535 000, 606 536 00, 606 544 000 Ratchets with a slot-head drive, minimum slot width 0 mm, Article No. 606 504 000 / 606 505 000 / 606 56 00 / 606 57 00 Material: Brass Weight: approx 0.5 kg/each Article No. 606 577 000 Curtainsider 27 curtain pole extrusion with press-on adapter Article No. 606 557 289 square Article No. 606 557 340 square Article No. 606 558 339 slotted
24.05.0.3 Side wall components / Curtain pole extrusion Pole extrusion Curtainsider curta pole extrusion adapter 35 top Fits curta pole extrusion, Article No. 606 568 330 Material: Brass Weight: approx 0. kg/each Article No. 606 564 000 Curtainsider push/draw/plug-in tube 35 With keder slot ength: 3000 / 3300 mm Material: Aluminium Surface: mill finish Weight: approx..6 kg/m Article No. 606 568 300 3000 mm 606 568 330 3300 mm Accessories Upper curta pole extrusion adapter, Article No. 606 564 000 ower curta pole extrusion adapter, Article No. 606 562 000 Curtainsider curta pole extrusion adapter, bottom, 35 Fits: Push/draw type, Article No. 606 568 300 / 606 568 330 Push/draw type, Article No. 606 535 000 / 606 536 00 / 606 544 00 Ratchets with a slot-head drive, minimum slot width 0 mm, Article No. 606 504 000 / 606 505 000 / 606 56 00 / 606 57 00 Material: Brass Weight: approx 0. kg/each Article No. 606 562 000
24.05.0.4 Side wall components / Curtain pole extrusion Slot-in profilele Curtainsider tarpaulin slot-in profile ength: 3000 / 3300 mm Material: Aluminium Weight: approx. 0.98 kg/m Article No. 606 569 300 3000 mm 606 569 330 3300 mm
24.06.0. Side wall components / ifting roof systems iftmaster iftmaster 770N manual 2750 mm Manually adjusts the roof height With permanent lowering Infinitely variable lifting with single strokes The roof structure can be raised by up to 500 mm provided that the roof weighs no more than 000 kg Retrofitting of lifting option possible Surface: KT-coated Colour: black Weight: approx. 6.0 kg/each Article No. 606 663 000 Retrofit kit for lifting option x oval-head screw, Article No. 606 652 000 x alignment shoe, Article No. 606 563 000 Spare parts ifting mechanism, Article No. 606 654 000
24.06.0.2 Side wall components / ifting roof systems iftmaster
24.06.02. Side wall components / ifting roof systems Axces Axces lifting roof system Manually adjusts the roof height With permanent lowering Infinitely variable lifting with single strokes The roof structure can be raised by up to 500 mm provided that the roof weighs no more than 000 kg (approx. 6 strokes using the hand pump) Retrofitting of lifting option possible Axces lifting mechanism Installation dimensions / cross-section 60 x 30 mm. Can be fitted to the relevant support profile with rivets or screws. Axces-Hydraman For operation from one side only. Hydraulic cylinder with integrated hand pump and operator controls. (Hand pump incl. lifting cylinder) Weight: 5. kg Article No. 606 720 000 Installation kit (Connectors incl. sliding arm and guide profile) Weight:.5 kg Article No. 606 76 000 Installation kit for height adjuster (Connectors incl. sliding arm, guide profile and height adjuster) Weight: 2.5 kg Article No. (currently unavailable) 0 X
24.06.02.2 Side wall components / ifting roof systems Axces Installation diagram for Axces-Hydraman Without roof height adjuster With roof height adjuster Hydraman Installation kit Hydraman Installation kit Height adjuster Hydraman Hand pump incl. lifting cylinder Hydraman Hand pump incl. lifting cylinder
24.07.0. Side wall components Accessories Curtainsider running rail, tarpaulin ength: 7000 mm Material: Aluminium Surface: mill finish Weight: approx..79 kg/m Article No. 606 73 000 Accessories Curtainsider pelmet Black, Article No. 606 26 009 / 606 26 04 / 606 26 020 / 606 26 056 Grey, Article No. 606 263 009 / 606 263 04 / 606 263 020 Curtainsider running rail ength: 7800 mm Surface: galvanised Weight: approx. 2.38 kg/m Article No. 606 26 000 Accessories Curtainsider tarpaulin track roller, Article No. 606 38 00 Curtainsider running rail with groove ength: 7800 mm Surface: galvanised Weight: approx. 3.0 kg/m Article No. 606 29 780 Accessories Curtainsider pelmet Black, Article No. 606 26 009 / 606 26 04 / 606 26 020 / 606 26 056 Grey, Article No. 606 263 009 / 606 263 04 / 606 263 020 Curtainsider tarpaulin track roller, Article No. 606 38 00
24.07.0.2 Side wall components Accessories Curtainsider running rail ength: 6000 mm Surface: galvanised Weight: approx. 2.5 kg/m Article No. 50 340 000 Accessories Curtainsider tarpaulin track roller, Article No. 606 302 000 / 606 304 000 Curtainsider track roller Single pair Fits Curtainsider steel running rail, Article No. 606 26 000 / 606 29 780 Surface: galvanised Weight: approx 0.22 kg/each Article No. 606 38 00 Curtainsider track roller Single pair Fits Curtainsider steel running rail, Article No. 50 340 000 Weight: approx 0.2 kg/each Article No. 606 302 000
24.07.0.3 Side wall components Accessories Curtainsider bogey wagon Double-pair Fits Curtainsider steel running rail, Article No. 50 340 000 Surface: galvanised Weight: approx 0.35 kg/each Article No. 606 304 000 Curtainsider exterior pelmet Fits Curtainsider running rail and cover frame profiles with groove, Article No. 606 080 000/ 606 73 000 / 606 29 000 Weight: approx. 0.85 kg/m Article No. 606 26 009 black, roller length 9 m 606 26 04 black, roller length 4 m 606 26 020 black, roller length 20 m 606 26 056 black, roller length 56 m 606 26 009 grey, roller length 9 m 606 263 04 grey, roller length 4 m 606 263 020 grey, roller length 20 m
24.07.0.4 Side wall components Accessories
The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy! Designs are subject to change. Our design proposals are non-binding! TITGEMEYER, GETO Van and POP are trademarks, registered trademarks or product names belonging to the respective title holder. Gebr. TITGEMEYER GmbH & Co. KG Hannoversche Straße 97 (Navigation: Hettlicher Masch 2) 49084 Osnabrück, Germany P.O. Box 43 20 49033 Osnabrück, Germany Phone: +49 (0)5 4/58 22-0 Fax: +49 (0)5 4/58 22-990 email: export@titgemeyer.com www.titgemeyer.com