90102 DL Series.qxp:DL Catalog 4/19/10 8:15 AM Page 1 DL Series Tubular Lock Copyright 2004-2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
90102 DL Series.qxp:DL Catalog 4/19/10 8:15 AM Page 2 Table of Contents DL Tubular Locks..................................................................... 1 Simplí Roseless Trim and RDL Series Locks.......................................... 2 Studio Collection Levers........................................................... 3 4 Ordering Gramercy Series Levers..................................................... 5 Coastal Series Levers & Roses....................................................... 6 Standard Levers & Finishes........................................................... 7 Architectural Specifications.......................................................... 8 MicroShield As part of their promise to provide innovative solutions to their customers, ASSA ABLOY Group companies offer the MicroShield technology, a silver-based antimicrobial coating designed to stem the spread of germs and bacteria. MicroShield is a trademark of Yale Security Inc., an ASSA ABLOY Group company. MicroShield Coating On The Cover: Simplí Roseless Trim with MQ lever Revolutionary finish coating available on all SARGENT product lines, utilizes a silver-based antimicrobial compound from Agion Technologies As an integral part of the finish coating, MicroShield lasts for the life of the hardware MicroShield coating permanently suppresses the growth of bacteria, algae, fungus, mold and mildew. It is effective against a broad spectrum of bacteria. Non-toxic and completely safe. The Agion antimicrobial compound is EPA and NSF approved and FDA listed for use in medical and food preparation equipment. Applications: Anywhere there is need for a clean environment (hospitals, laboratories, schools, medical centers, daycare, food processing etc.) The Agion antimicrobial is not intended as a substitute for good hygiene. Coated products must still be cleaned to insure the surfaces will be free of destructive microbes. ASSA ABLOY makes no representations or warranties, express or implied, as to the efficacy of the Agion antimicrobial. A copy of the Agion warranty is available upon request. Agion is a registered trademark of Agion Technologies, Inc., Wakefield, MA, USA
90102 DL Series.qxp:DL Catalog 4/19/10 8:15 AM Page 1 Specifications, Functions & Options Description Series & Function Both levers retract latch Ideal for closets & bedrooms DLU15 Passage Set DL Series Tubular Lock The DL Series tubular lock is designed for ease of installation with the quality you expect from the SARGENT name. The DL Series exceeds the expectations of the most demanding architects and design professionals. All Studio Collection and Coastal Series levers, as well as standard levers, can be used with the DL. Ideal interior applications include hotel guest rooms, high-end apartments, and condominiums. Blank rose outside Lever retracts latch I/S lever always retracts latch O/S lever retracts latch, except when locked by inside push button Closing door unlocks outside lever Includes emergency release Ideal for bathrooms & home offices Lever always rigid No latch included Ideal for pantries & closets Surface Mounted* Levers always rigid No latch included Ideal for sliding doors Through-bolted DLU15-3 Communicating Set DLU65 Privacy Set DLU93 Single Lever Pull DLU94 Double Lever Pull General Information For doors 1-3 8" (35mm) to 1-3 4" (44mm) thick standard 2-3/4" Backset standard with square corner front, 2-1/4'" x 1-1/8" (specify 20- for 2- backset) ANSI Standard 161 Door Prep (Except 93 & 94) Latchbolt brass 1 2" (12.7mm) projection Specify hand of lock on order; easily field reversible Warranty: 1 Year * DLU93 Single Lever Pulls are recommended for use on solid wood or metal doors Available Options 12 UL Listed for 3 hour Fire Rated doors 13 Lockset x Front & Strike with 1/4" Radius and 2- Backset 14 505 Full lip strike 20 2-3 8" backset latch with square corner front 2-1/4" x 1" front 28 Strike #808. Lip length 1-1 4" 31 1-7 8" to 2" thick door only centered in door SG- TB WBS MicroShield an antimicrobial powder coat Through-bolting for DLU93 Function Wrought Box Strike How to Order : Series Function Rose Lever Finish DL U15 TO MM 26D 1
90102 DL Series.qxp:DL Catalog 4/19/10 8:15 AM Page 2 Simpli Roseless Trim and RDL Locks Information and Functions Description Series & Function Both levers retract latch Ideal for closets & bedrooms RDLU15 Passage Set Simplí Roseless Trim and RDL Tubular Locks This elegant trim by SARGENT seamlessly unifies the lever and the door. Compatible with most Studio Collection and Coastal Series designer levers, Simplí creates a flawless aesthetic vision on any door opening. Simpli is offered on the RDL Series tubular lock, which was specially designed to accept the roseless trim. In addition to the RDL Series, Simpli is also available with the R8200 Series mortise locks and Harmony R8200 Series mortise locks. RDL Series with Simpli trim is available with all DL functions Simpli roseless trim is available with Coastal Series (except C) and Studio Collection levers (except MC, MK, ML, MN, MP, MT and Gramercy levers) Selected levers return within ½" of the door face Simpli roseless trim is not compatible with DL latches; can only be used with RDL locks Blank rose outside Lever retracts latch I/S lever always retracts latch O/S lever retracts latch, except when locked by inside push button Closing door unlocks outside lever Includes emergency release Ideal for bathrooms & home offices Lever always rigid No latch included Ideal for pantries & closets Through-bolted Levers always rigid No latch included Ideal for sliding doors Through-bolted RDLU15-3 Communicating Set RDLU65 Privacy Set RDLU93 Single Lever Pull RDLU94 Double Lever Pull General Information For doors 1-3 4" (44mm) thick RDL is UL Listed for 3 hour Fire Rated doors 2-3/4" Backset standard with square corner front, 2-1/4'" x 1-1/8" (specify 20- for 2- backset) Latchbolt brass 1 2" (12.7mm) projection Specify hand of lock on order; easily field reversible Warranty: 1 Year Note: Special door prep templates required. This product is not compatible with 160/161 cylindrical lock preparations 2 Available Options 1 For doors 1- (35mm) Thick 13 Lockset x Front & Strike with 1/4" Radius and 2- Backset 14 505 Full lip strike 20 2-3 8" backset latch with square corner front 2-1/4" x 1" front 28 Strike #808. Lip length 1-1 4" SG- WBS MicroShield an antimicrobial powder coat Wrought Box Strike How to Order R: Series Function Rose Lever Finish RDL U15 R MM 26D Note: Roseless trim requires the use of RDL locks. Use the letter R for the Rose when specifying roseless trim.
90102 DL Series.qxp:DL Catalog 4/19/10 8:15 AM Page 3 Studio Collection Levers Aventura Series Odéon Series MC MA 5-136.56mm 2-13/32" 61.34mm MN 4-17/32" 115.09mm 2-1/8" 53.97mm 5-136.13mm 5-5/32" 130.90mm MB 2-1/2" 63.75mm MH 2-3/4" 69.87mm 4-11/16" 118.80mm 5-7/32" 132.25mm ME 2-17/32" 64.26mm MK 3" 76.08mm 2-3/4" 69.81mm MF 4-111.13mm 2-25/32" 70.99mm MS 2-21/32" 67.29mm 5-136.28mm 2-15/32" 62.34mm 5-1/2" 139.83mm 5-1/16" 128.97mm MG 2-15/32" 62.59mm MU 3-1/16" 78.10mm MI MW* 5-13/32" 137.03mm 5" 2-19/32" 65.79mm 2-1/2" 63.5mm * Lever returns within 1/2" (13mm) of door face Not available with Simplí roseless trim Mv NS* NU* MX* 2-15/16" 2-7/8" 2-7/8" 5-1/8" 129.85mm 5-1/4" 5-1/4" 5-5/16" 2-7/8" 73.02mm 3
90102 DL Series.qxp:DL Catalog 4/19/10 8:15 AM Page 4 Studio Collection Levers Centro Series MC 5" 127.03mm 2-1/4" 57.03mm Notting Hill Series MQ 5-3/32" 129.66mm 2 5/16" 58.36mm 5-136.40mm 4-23/32" 119.99mm MD 2-17/32" 64.52mm MR 2 27/32" 71.88mm 4-13/16" 121.85mm 4-31/32" 125.94mm MJ 2-1/2" 63.13mm MT 2-17/32" 64.58mm MP 4-13/32" 111.76mm 2 3/16" 55.75mm MM 5-1/8" 130.03mm 2-3/4" 69.87mm 5-1/8" 5- ND* 2-3/4" MY* 2-15/16" 5-5/16" NJ* 2-11/16" Gramercy Series** 5 1/4" 133.35mm Rialto Series MO ML MZ* * Lever returns within 1/2" (13mm) of door face Not available with Simplí roseless trim ** The Gramercy levers are customized; refer to page 5 for ordering information 4 2-7/8" 4-5/16" 109.61mm 4-19/32" 116.73mm 5-1/8" 2-15/32" 62.47mm 2-21/32" 67.80mm RCM RAL REM RAM RAS RAW 5 1/4" 133.35mm 5 1/4" 133.35mm 5 1/4" 133.35mm 5 1/4" 133.35mm 5 1/4" 133.35mm 3 3/32" 78.58mm 3 3/32" 78.58mm 3 3/32" 78.58mm 3 3/32" 78.58mm 3 3/32" 78.58mm 3 3/32" 78.58mm
90102 DL Series.qxp:DL Catalog 4/19/10 8:15 AM Page 5 Ordering Gramercy Series Levers Elements of Gramercy Series Levers (DL Series Only) grip grip insert shank shank shank REM RCM RAM, RAW, RAS, RAL Lever Part Number Shank Finish* Insert Grip Finish Plain REM With Raised Band RCM Polished stainless (629) n/a With Metallic Insert RAM Polished stainless (629) With Wood Insert With Santoprenne Insert With Leather Insert RAW RAS RAL * Rose and escutcheon finish is designated by shank finish selected Grip finish must match shank finish n/a Satin stainless (630) Birch (BH) Black (BK) Black (BK) or brown (BN) Polished stainless (629) To order Gramercy Series levers with SARGENT products, see the examples below. When specifying finish, use the last two digits of the BHMA standard finish code, i.e. use 29 for polished stainless, BHMA finish 629. How to Order DL Series Locks with Gramercy Levers Options Series Function Roses Lever Select from page 2 DL Select from page 2 Select from page 6 Leather insert Shank Finish* Polished or satin stainless Insert Finish Black or brown Grip Finish Polished or satin stainless 28- DL U65 TO RAL 29 BN 29 Gramercy Levers are available with O, CO & TO roses; DLU93 & DLU94 functions are also available with CR, LN & TR roses. 5
90102 DL Series.qxp:DL Catalog 4/19/10 8:15 AM Page 6 Coastal Series Levers & Roses Coastal Series (DL & RDL Series) C - Coronado Not availlable with Simpli roseless trim 2" 63mm 5-1/4" 133mm DL Tubular Lock Roses 5" TO Rose CO Rose G - Gulfport 2-15/16" 74mm R - Rockport 2-3/4" 70mm 4-3/4" 121mm O Rose 5" Additional Roses for DLU93 and DLU94 Functions Only S - Sanibel 3-7/16" 87mm Y - Yarmouth 6 2-15/16" 74mm 5" TR Rose LN Rose Simpli Roseless Trim.810 1.500 CR Rose 1.500
90102 DL Series.qxp:DL Catalog 4/19/10 8:16 AM Page 7 Standard Levers and Finishes Standard Levers (DL Series Only) 5 5-1/4 133mm MC A 2-15/16 51mm J 2-13/16 71mm 5 5 MD B 2-5/8 67mm L 2-3/8 60mm 4-1/2" 114mm 5-1/2 140mm MJ E 2-1/2 64mm P 2-1/2 67mm 4-1/2" 114mm 4-1/2 114mm MP F 2-3/4 67mm W 2-1/2 64mm Finishes for RDL & DL Series SARGENT Description BHMA 03 Polished brass, clear coated 605 04 Satin brass, clear coated 606 09 Polished bronze, clear coated 611 10 Satin bronze, clear coated 612 10B Oxidized bronze, oil rubbed 613 10BL Oxidized satin bronze, clear coated 614 14 Polished nickel, clear coated 618 15 Satin nickel, clear coated 619 20D Statuary dark bronze, clear coated 624 26 Polished chrome 625 26D Satin chrome 626 32 Polished stainless steel 629 32D Satin stainless steel 630 7
90102 DL Series.qxp:DL Catalog 4/19/10 8:16 AM Page 8 Architectural Specifications DL Exploded View Patent Pending RDL Exploded View Architectural Specifications 2.0 Tubular Locksets A. Locksets shall be either standard tubular (DL Series) or roseless tubular (RDL Series) as manufactured by SARGENT Manufacturing Company, New Haven, CT. B. Locks shall be non-handed with bi-directional lever operation. C. The DL Series locks mount in a standard ANSI 161 door preparation (2-1/8 inch dia.) without additional through-bolt preps. RDL Series require special custom door preparation. D. Lockset levers shall be made of solid material with no plastic fillers. E. Locks shall have a 2-3/4" (70mm) backset standard, with 2- (60mm) offered as an option. F. Strikes shall be non-handed with a curved lip. G. Locks shall have a one year limited warranty. 8
90102 DL Series.qxp:DL Catalog 4/19/10 8:16 AM Page 9
90102 DL Series.qxp:DL Catalog 4/19/10 8:16 AM Page 10 SARGENT Manufacturing Company 100 Sargent Drive New Haven, CT 06511 USA 800-727-5477 www.sargentlock.com Founded in the early 1800s, SARGENT is a market leader in locksets, cylinders, door closers, exit devices, electro-mechanical products and access control systems for new construction, renovation, and replacement applications. The company s customer base includes commercial construction, institutional, and industrial markets. Copyright 2004-2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. 90102:C -4/10