Multilink Transportation Power Solutions For Traffic, Intelligent Transportation Systems (ITS), Surveillance and Security Applications MULTILINK IS THE CHOICE WHEN SAFETY MATTERS. GoMultilink.com GoMultilink.com. Place an order: TrafficSales@GoMultilink.com. 440.731.6210
Line Interactive and Online Emergency Power Solutions Safety and Reliability Matters Uninterrupted power is not an option for security conscious agencies; it is a mission requirement. Mission critical applications require a clean, uninterrupted supply of power. Multilink Uninterruptible Power Supplies (UPS), available in both single and double conversion models, are the respected choice for quality, value, reliability and American innovation. Multilink is the choice when safety matters. While other UPS manufacturers force you to choose either single conversion or double conversion systems, Multilink s Emergency Power solutions include the best of both technologies. We understand that different needs require different solutions and we provide both single and double conversion power solutions for a wide variety of applications that require safety and reliability, including: Traffic Intersections and Tolling Adaptive Traffic Corridors Intelligent Transportation Systems Variable and Dynamic Message Systems Highway, Urban and Rural Surveillance Border Crossings and High Value Data What is the difference between single and double conversion? Most all UPS units utilize some type of primary AC input, such as commercial utility power. When that power source is interrupted stored energy, usually a battery bank, or alternative energy source, often a generator, flows through a UPS inverter to replace the lost source. A single conversion system typically converts DC battery power to AC, thus single conversion, when the primary source is interrupted. A double conversion system, on the other hand, is continuously converting AC input sources to DC in a complex power conditioning phase, then delivering modified AC output power, thus double conversion. Both have cost and operational benefits which should be weighed for each intended application. Unlike others, however, Multilink s systems bring the most advanced engineering and support to both types of emergency power. GoMultilink.com. Place an order: TrafficSales@GoMultilink.com. PH. 440.731.6210
Line Interactive and Online Emergency Power Solutions Online Double Conversion The Multilink EP ITS series of uninterruptable power supplies serve as electrical firewalls between incoming power and the valuable and sensitive electronic equipment you rely upon for the safety of your citizens and vital security interests. Online Double Conversion UPS systems offer the highest quality of continuously conditioned power to the critical load. Advanced design circuitry ensures no-break operation during load transfers from normal mode to the bypass mode and back, and complete independence of the output voltage and frequency from a wide range of input voltage and frequency. To make the operation fast, safe and efficient Multilink uses Insulated Gate Bipolar Transistor (IGBT) technology, which is used in sophisticated particle and plasma physics operations. Many consider Double Conversion the most complete topology in terms of load protection, regulation and performance. Two models are available, the EP ITS 1100. with 1kVA output, and the EP ITS 2100, with 2kVA output. Line Interactive Single Conversion The Multilink EP 2200 series of Line Interactive, Single Conversion UPS provides unparalleled reliability and value. Like all Multilink power products the EP 2200 series allows for a wide range of input voltages to accommodate sags and brownouts and a specially designed buck-boost transformer to maintain steady output under varied conditions. With intuitive onboard system software for programming, control and monitoring, the available internet interface modules makes the EP 2200 series one of the most user friendly, remotely accessible UPSs on the market. Configured with either screw terminal connectors, or Caltrans specified Anderson connectors, the EP 2200 series is powerful, flexible and efficient. Available in 120v and 240v configurations. GoMultilink.com. Place an order: TrafficSales@GoMultilink.com. 440.731.6210
Photo coming soon EP ITS 1100 Ultraconditioned Emergency Power The Multilink EP ITS 1100 online Double Conversion UPS represents the most comprehensive approach to conditioned emergency power for critical Intelligent Transportation Systems (ITS), Homeland Security and Mission Critical applications. Designed to endure rugged outdoor conditions in the most demanding environments, the Multilink EP ITS is in a class by itself. The EP ITS 1100 is designed as a 36V supply, utilizing a 3 battery string. The EP ITS 1100 converts incoming AC power to DC power through an advanced rectifier, then reconverts the DC power to AC power through the inverter module, supplying clean, consistent AC power to the load. Each system comes standard with Ethernet monitoring and specially designed software. Technology Advantages Instantaneous transfer to stored energy mode in the event of an AC input supply failure Continuous protection of load by the advanced inverter, whether it originates from the AC input supply or from the battery bank Isolation of the load from the upstream distribution system, eliminating transmission of any upstream fluctuations such as spikes and over voltages to the load Specifications Extremely wide input-voltage tolerances and precise regulation of the output voltage Superior performance levels under steadystate and transient conditions Advanced cooling design for years of operations, and investment protection Insulated Gate Bipolar Transistor (IGBT) technology GoMultilink.com. Place an order: TrafficSales@GoMultilink.com. PH. 440.731.6210
Photo coming soon EP ITS 2100 Ultraconditioned Emergency Power The Multilink EP ITS 2100 online Double Conversion UPS represents the most comprehensive approach to conditioned emergency power for critical Intelligent Transportation Systems (ITS), Homeland Security and Mission Critical applications. Designed to endure rugged outdoor conditions in the most demanding environments, the Multilink EP ITS is in a class by itself. Available in two output models to meet any application. The EP ITS 2100 converts incoming AC power to DC power through an advanced rectifier, then reconverts the DC power to AC power through the inverter module, supplying clean, consistent AC power to the load. Each system comes standard with Ethernet monitoring and specially designed software. Technology Advantages Instantaneous transfer to stored energy mode in the event of an AC input supply failure Continuous protection of load by the advanced inverter, whether it originates from the AC input supply or from the battery bank Isolation of the load from the upstream distribution system, eliminating transmission of any upstream fluctuations such as spikes and over voltages to the load Specifications Extremely wide input-voltage tolerances and precise regulation of the output voltage Superior performance levels under steadystate and transient conditions Advanced cooling design for years of operations, and investment protection Insulated Gate Bipolar Transistor (IGBT) technology GoMultilink.com. Place an order: TrafficSales@GoMultilink.com. 440.731.6210
EP 2200-T High Efficiency Transportation Power The Multilink EP 2200-T was designed with the demanding needs of traffic applications in mind. In the event of an interruption to the input load the Multilink EP 2200-T provides emergency power so quickly that traffic controllers, signals, cameras and peripherals continue to operate normally. The system operates as a parallel connection of the UPS inverter with the AC supply. The specially designed inverter is operational to provide output voltage conditioning and battery charging. If the utility input power drops, spikes or fails, the inverter and stored energy continuity of power to crucial applications. The high efficiency design maximizes inverter phase operation. Technology Advantages High efficiency design for greater battery runtime Specially designed buck/boost transformer and inverter system to accept a wide range of input voltages while providing clean, stable output power Advanced Multilink conditioning to provide superior transient voltage protection Temperature compensated battery charging Designed for a wide range of agency compliance, including Caltrans Available with standard screw terminal connectors or optional recessed Anderson connectors Optional internal communication card and monitoring software for advanced web access Specifications GoMultilink.com. Place an order: TrafficSales@GoMultilink.com. PH. 440.731.6210
EP 2200-E High Efficiency Transportation Power The Multilink EP 2200-E is engineered for markets requiring 220v 240v Output at either 50hz or 60Hz. The rugged unit can be factory or user configured for 220v, 230v, or 240v. As is the case with other Multilink systems, the EP 2200-E provides stable emergency power so that traffic controllers, signals, cameras and peripherals continue to operate normally. The EP 2200-E provides superior Brownout Protection, boosting Output voltage during Brownout conditions and other incidents of low Input. This feature is also beneficial for the unit s generator mode, allowing a variety of input options for the most demanding environments and conditions. Technology Advantages Superior Brownout Protection boost feature designed for safe operation in the presence of input power fluctuation MOV Transient Suppression Efficient design for long battery runtime Specifications Optional RS 232 communication card for Ethernet connection Superior cooling mechanisms and wide temperature operation range for extended life in harsh conditions Versatile output voltage 220v - 240v GoMultilink.com. Place an order: TrafficSales@GoMultilink.com. 440.731.6210
Traffic and ITS Power Transfer Devices Single Conversion UPS Applications. Multilink Power Transfer Devices combine the best of Manual Bypass and Power Transfer Switch design in one rugged product. The Multilink PTD 2200 is a highly reliable, safe and durable Power Transfer Device. Like its associated UPS models, the EP 2200-T and EP 2200-Caltrans models, the PTD 2200 can be ordered with a screw terminal strip or Anderson connectors. Provides for uninterrupted power loads to ITS, Traffic or Surveillance cabinets during maintenance or replacement of UPS Enables safe removal of power or replacement without disrupting the power load Enables alternative power sources Double Conversion UPS Applications. For use with our EP ITS- 1100 and EP ITS-2100 double conversion UPS models the Multilink PDT-ITS is a programmable automatic transfer switch designed to meet tight space requirements. Safely switches UPS power mode back to utility input from auxiliary operations Allows UPS removal, service or replacement without disrupting load Allows use of alternative energy sources, such as portable generators Multilink has an appropriate Power Transfer Device for all traffic and ITS applications GoMultilink.com. Place an order: TrafficSales@GoMultilink.com. PH. 440.731.6210
Multilink MultiMax UPS Batteries Advanced 105AH AGM Batteries Designed Specifically for UPS Systems Designed For Critical Applications Multilink s MultiMax UPS Batteries utilize advanced Valve- Traffic and ITS UPS Regulated Lead-Acid (VRLA) AGM (Absorbed Glass Mat) design for superior power, battery life Tolling & Border Stations and product safety. Designed Critical Surveillance for use in the most critical Traffic Operations Centers emergency power conditions, MultiMax batteries feature a Cable (CATV) UPS one-way pressure relief valve Network Operations Centers system which allows oxygen produced on the positive plate to be absorbed by the negative plate, suppressing negative plate hydrogen production. As a result, water (H 2 O) is produced and the battery maintains operational moisture. MultiMax Battteries never need to be opened or watered, providing years of trouble free service. And, they re powerful. A four battery string is engineered to last 11 hours against a 400W load. The MultiMax has a power rating of 105 AH Capacity with a 20 Hour Rate at 5.1 Amp average, allowing a four-battery string to provides hours of emergency power, exceeding agency specifications. Thermally welded case-to-cover bond to ensure a leak-proof seal UL1778, UL924 and UL94 V-2 Compliant Multi-cell design for ease of installation and maintenance Threaded brass terminal inserts eliminate connection re-torque requirements Absorbent Glass Mat (AGM) technology for efficient gas recombination (over 99%) and freedom from electrolyte maintenance Can be used upright, side or end mounted Flame-arresting one-way pressure relief vents for safety and long life Flame Retardant polypropylene case and cover compliant with UL 1778 GoMultilink.com. Place an order: TrafficSales@GoMultilink.com. 440.731.6210
Multilink BBS, ITS and SPECIALTY Cabinets Multilink BBS, ITS and specialty cabinets provide the maximum in quality construction, durability and value. For applications ranging from Advanced Adaptive Traffic and Border Protection power solutions to Surveillance and Tolling, Multilink is the respected name in outdoor enclosures. All Multilink cabinets are designed and manufactured in the United States from the highest quality materials. Multilink designs and manufactures a full range of enclosures to offer functionality, security, and protection against harsh conditions and and criminal activity. Choose from among the cabinets listed below, or contact your sales professional for a custom quote. A = Cabinet Height B = Cabinet Width C = Cabinet Depth D = Height Of The Door E = Width Of The Door ITS equipment - Intelligent Transportation Systems BBS Battery Backup Systems Border Patrol Surveillance equipment DMS Dynamic Message Signs VMS Variable Message Signs TTS - Travel Time Systems Highway surveillance systems Remote outpost powering, Power huts Specially designed, environmentally controlled cabinets for harsh regions of North and South America, the Persian Gulf and polar installations F = Vertical Distance Between The Mounting Holes In The Ground Mount Application G = Horizontal Distance Between The Mounting Holes In The Ground Mount Application H = Height Of Rack Rail Assembly J = Width Of Rack Rail Assembly K = Depth Of Rack Rail Assembly L = Cntr To Cntr Dist. B/W The Holes Of The Rack Rails/ Mounting Hole Dist. Of The Eqpt GoMultilink.com. Place an order: TrafficSales@GoMultilink.com. PH. 440.731.6210
Multilink Transportation Power Solutions FOR TRAFFIC, INTELLIGENT TRANSPORTATION SYSTEMS (ITS) AND NATIONAL SECURITY MULTILINK IS THE CHOICE WHEN SAFETY MATTERS. GoMultilink.com 580.Ternes Lane Elyria, OH 44035 PH. 440.731.6210. PH. 440.731.6210 GoMultilink.com Place an order: TrafficSales@GoMultilink.com Copyright 2014 Multilink Inc. All rights reserved Specifications subject to change without notice