DWR 6010 Vibration proof resistance 8mm Moveable 1/4"BSP compression fitting. Mounting direct or with a thermowell depending on the application. Available with relevant marine Type DWR 6010 DWR 6022 Vibration proof resistance conical shaped tip from 12 to 8mm. Precision Pt100 detector Moveable 1/2" BSP compression fitting (optional 3/4" BSP). Type DWR 6022 DWR6030 Vibration proof resistance temperature sensor, 12mm with a reduced tip of 9mm has a Type DWR 6030 DWR 6040 Vibration proof resistance conical shaped tip from 12 to 8mm. Precision Pt100 detector 600 C. All parts in contact with Type DWR 6040
DWR 6041 Vibration proof resistance 8mm Moveable 1/4"BSP compression fitting. Mounting direct or with a thermowell depending on the application. Available with relevant marine Type DWR 6041 DWR6043 Vibration proof resistance temperature sensor, 12mm with a reduced tip of 9mm has a Type DWR 6043 DWR 6042 Vibration proof resistance thickwall 12mm (10mm. diameter optional) straight insertion tube with a Moveable 1/2"BSP ( optional 3/4"BSP ) compression fitting. Type DWR 6042 DWR 6055 Vibration proof resistance vibration test 2, ENV4. Solid drilled SS316 thermowell 18mm conical shaped to 12mm at the tip. Replaceable temperature sensor (DWR6050). Pt100 detector class B Temperatures up to 600 C. The sensor is delivered Fixed insertion length to be specified. Process connection 1/2"BSP (optional 3/4"BSP). Type DWR 6055
DWR 6050 Replacement resistance Heavy-duty temperature replacement sensor for DWR6055. This temperature sensor with 10mm shaft has a reduced tip of 6mm. Pt100 detector connected in a 3 or to IEC 751 class B. Maximum temperature 600 C. The sensor is delivered with armoured heatresistant cable, length to be specified. Lloyds vibration test 2. Type DWR 6050 DWR 6060 Bearing resistance sensor for measuring bearing 3mm mineral insulated temperature sensor has a precision Pt100 detector connected in a 3 or to IEC 751 class B. Maximum temperature 250 C. All parts in contact with the media are made of stainless steel 316. The sensor is delivered with a heat-resistant silicon cable, length to be specified. Length up to 30 meter. Two moveable 1/4"BSP compression fittings. Available with relevant marine Type DWR 6060 DWR 6070 Oil- and watertemperature resistance designed for measuring cooling water, lubrication oil, hydraulic oil and refrigeration installations for marine applications. Pt100 (optional Pt1000) detector class B. Temperature range -50 C to 250 C. Lloyds vibration test 2 ENV4. Protection pocket made from one piece machined bar, insertion length 50mm. Diameter 11mm. All parts in contact with the media are made of stainless steel 316. The process connection is 1/2"BSP. Direct connected silicon cable, 240 C Type DWR 6070
RV2094 Wall mounted Resistance Wall mounted resistance designed tomeasure ambient temperatures incold and wet areas, such as coldstorage rooms and freezers.precision platinumdetector accuracy to IEC 751class A or class B or 1/5A. Temperaturerange -30 C to 60 C. Pt100 sensor connected in a 4 wire system. Ingressprotection IP67.Closed 6mm, 316SS acidproofprotection tube. lengtjh 80mm Samac coated wallmounted connectionbox with cable gland. Available with a tansmitter 4-20mA or 0-10 Volt transmitter. Type RV2094 DWR 6080 Cargo resistance Resistance designed to measure temperatures in cold and wet areas, such as cargo compartments, refrigerated cargo vessels, cold storage rooms and tanks. This temperature sensor has a. Standard connected in a 3 or to IEC 751 class A or optional IEC 751 1/6 class B. Temperature range -30 C to 60 C. The protective stainless steel 316 sheath is covered with a shock absorbing and isolating rubber jacket. Stainless steel 316 welded eyelet. Flexible rubber insulated connection cable, length can be specified. Type DWR 6080 DWR 6090 Penetration resistance (USDA) Penetration resistance for temperature measurement in semi-solid products. This temperature sensor has a. Standard connected in a 3 or to IEC 751 class A or optional IEC 751 1/6 class B. Temperature range -30 C to 60 C. All stainless steel 316 sheath and grip. For penetration the sensor has a needle tip. The sensor protection tube dimmensions are 70 x 6mm. Flexible PVC insulated connection cable, length can be specified. Special for insertion in cold or frozen provisions, to measure or for controlling during transport we manufacture a USDA version wit an accuracy of ±0.05 C at 0 C, which is available in any cable length required. Type DWR 6090
Powered by TCPDF (www.tcpdf.org) Pt100 Sensors for Ships DWR 6095 Air resistance Wall mounted resistance designed to measure ambient temperatures in cold and wet areas, such as cold storage rooms and freezers. Precision wire-wound platinum detector accuracy to IEC 751 class A or class B. Temperature range -30 C to 60 C. Pt100 sensor connected in a 3 or optional 4 wire system. Ingress protection IP65. Perforated 15mm, 316SS acid-proof protection tube. Brass wallmounted connectionbox with cable gland. Available with all relevant marine Type DWR 6095 DWR 6120 Vibration proof resistance designed to measure cooling water, lubrication oil, hydraulic oil and refrigeration installations in marine applications. Lloyds vibration test 2, ENV4. Precision wire-wound Pt100 detector connected in a 2, 3 or 4 wire system. Accuracy to IEC 751 class B standard, optional class A, 1/3DIN or 1/10DIN. Temperature range: -200 C to 600 C. Closed-end 9mm 316SS acid-proof protection tube. Welded processconnection 1/2"BSP. Aluminium connectionhead DIN B. Cable gland M20x1.5mm included. Replaceable 6mm measuring insert model MI6140. Can be delivered with head mounted transmitter. Insertion length as required. Type DWR 6120 DWR 6130 Vibration proof resistance designed to measure cooling water, lubrication oil, hydraulic oil and refrigeration installations in marine applications. Lloyds vibration test 1. Precision wire-wound Pt100 detector Connected in a 2, 3 or 4 wire class B standard, optional class A, 1/3DIN or 1/10DIN. Temperature range: -200 C to 600 C. Closedend 9mm 316SS acid-proof protection tube with head extension. Welded processconnection 1/2"BSP. Aluminium connectionhead DIN B. Cable gland M20x1.5mm included. Replaceable 6mm measuring insert model MI6140. Can be delivered with head mounted transmitter. Insertion length as required. MI 6140 Replacement resistance Spring loaded vibrationproof Pt100 insert. Detector connected in a 3 or optional 4 wire system. Accuracy to IEC 751 class B. Maximum temperature 600 C. Diameter 6.0mm (3mm, 4.5mm, 6.4mm and 8mm optional) Mineral insulated, 316SS sheathed. Suits B-type connection head. Max. connection wire diameter 3mm. Optional with 4-20mA transmitter. Lloyds vibration test 1. Type MI 6140 Type DWR 6130