SEQ. #416-612 MINNESOTA PRICING PAGES (Typed Responses Required) JUNE, 2012 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: AFTERMARKET TRACTOR/SKIDSTEER ATTACHMENTS Titan Machinery Inc. Andy Bethel 6340 County Road 101 E Shakopee, MN 55379 952-445-5400 800-795-9274 952-445-0365 andy.bethel@titanmachinery.com 1.0 Manufacturer's Name Attachment Description Warranty Term (months, years) Discount to be applied to Price List Date & I.D. of Price List Woods SSL Price Pages 1 year 8% 1-Aug-12 2.0 Delivery Charge See Special Terms and Conditions Delivery Starting Point-City, State, Zip Code: Price Per Loaded Mile: NO FLAT RATE ALLOWED Nearest Titan Case Location $ 4.00 3.0 Price for additional Service Manual 4.0 Price for additional Parts Manual Free Free 5.0 Installation - Per Hour (Shop Rate) Installation services may be requested on an "as needed" basis. (See Special Terms and Conditions) $ 105.00 6.0 Extended Warranty Options Use this section to offer performance/warranty options, number these items starting with 6.1, 6.2, etc. (Specify years, miles or hours extended term covers.) Price: $ 6.1 $ 6.2 $
SKID STEER ATTACHMENTS ALITEC SKID STEER ATTACHMENTS (Alitec Discount).............................. 5-2 5-22 Alitec Buckets................................................................... 5-2 5-7 Construction Buckets............................................................. 5-2 5-4 Utility Buckets......................................................................... 5-5 Case -Compatible Skid Steer Loader Buckets............................................. 5-6 High Capacity, Light Material Buckets.................................................... 5-7 Alitec Skid Steer Attachments.................................................... 5-8 5-21 Angle Brooms and Pick-Up Brooms...................................................... 5-8 Cold Planers, Standard-Flow Skid Steer Mounted........................................ 5-9 Cold Planers, High-Flow Skid Steer Mounted..................................... 5-10 5-14 Pavement Saws...................................................................... 5-15 Rock Wheels......................................................................... 5-16 Stump Grinders...................................................................... 5-17 Vibratory Rollers...................................................................... 5-18 Tillers............................................................................... 5-19 Augers, Planetary Drive Skid Steer Mounted........................................... 5-20 Augers, Planetary Drive Compact Excavator and Backhoe Mounted....................... 5-21 Quick Disconnect Coupler Kits (Alitec Discount)....................................... 5-22 WOODS SKID STEER ATTACHMENTS (Woods Discount)........................... 5-23 5-27 Standard-Duty Toothbars........................................................ 5-23 5-24 Pallet Forks.................................................................... 5-25 5-26 Bale Spear........................................................................... 5-26 Manure Forks........................................................................ 5-27 Grapple Fork Attachment.............................................................. 5-27 5-1
ALITEC SKID STEER ATTACHMENTS BUCKETS LPSB-SERIES LOW PROFILE, SHORT BOTTOM CONSTRUCTION BUCKETS Universal coupler system (per SAE J2513) Heavy-duty construction No internal gussets or obstructions Square back for reverse grading Pre-drilled front cutting edge to accept bolt-on reversible cutting edge or bolt-on teeth (sold separately) Short bottom design to provide higher breakout force Optional standard-duty toothbars available (see pages 5-23 5-24) Alitec Gray color BASE BUCKET SHOWN WITH OPTIONAL BOLT-ON CUTTING EDGE MIN. SKID STEER SAE LOAD RATING lbs. 1,500 1,675 1,750 1,925 2,075 2,250 in. 60 63 66 73 78 84 Bucket Profile Model No. Width (in.) SAE Struck Cap. (cu. ft.) SAE Heaped Cap. (cu. ft.) LPSB-60 101444060 60 9.0 11.9 442 $ 989.00 LPSB-63 101444063 63 9.4 12.5 455 1,020.00 19.9 LPSB-66 101444066 66 9.9 13.2 468 1,053.00 LPSB-73 101444073 73 10.9 14.6 510 1,084.00 34.0 LPSB-78 101444078 78 11.7 15.7 540 1,182.00 LPSB-84 101444084 84 12.6 16.9 561 1,236.00 Description 1014175K 60 Bolt-on Cutting Edge Kit 61 $ 199.00 1015267K 63 Bolt-on Cutting Edge Kit 64 214.00 1014176K 66 Bolt-on Cutting Edge Kit 67 204.00 1014177K 73 Bolt-on Cutting Edge Kit 74 221.00 1014178K 78 Bolt-on Cutting Edge Kit 79 239.00 1014179K 84 Bolt-on Cutting Edge Kit 85 272.00 1016060 156-Series Top Pin Bolt-on Shank & Tooth Kit (7 teeth) 60 & 63 45 327.00 1016061 156-Series Top Pin Bolt-on Shank & Tooth Kit (8 teeth) 66 & 73 55 372.00 1016062 156-Series Top Pin Bolt-on Shank & Tooth Kit (9 teeth) 78 & 84 64 433.00 1023950 23-Series Side Pin Bolt-on Shank & Tooth Kit (7 teeth) 60 & 63 45 327.00 1023951 23-Series Side Pin Bolt-on Shank & Tooth Kit (8 teeth) 66 & 73 55 372.00 1023952 23-Series Side Pin Bolt-on Shank & Tooth Kit (9 teeth) 78 & 84 64 433.00 NOTE: All hardware needed to attach accessories to base bucket is supplied in kit. WARNING: Attachment selection and application must not exceed skid steer model rated operating loads or other specific requirements. All Operator s Manual and mounting instructions must be followed. P 5-2
ALITEC SKID STEER ATTACHMENTS BUCKETS (Continued) LPLB-SERIES LOW PROFILE, LONG BOTTOM CONSTRUCTION BUCKETS Universal coupler system (per SAE J2513) Heavy-duty construction No internal gussets or obstructions Square back for reverse grading Pre-drilled front cutting edge to accept bolt-on reversible cutting edge or bolt-on teeth (sold separately) Long bottom design for improved front edge visibilty Optional standard-duty toothbars available (see pages 5-23 5-24) Alitec Gray color BASE BUCKET SHOWN WITH OPTIONAL BOLT-ON TEETH MIN. SKID STEER SAE LOAD RATING lbs. 1,875 1,950 2,050 2,275 2,450 2,625 in. 60 63 66 73 78 84 Bucket Profile Model No. Width (in.) SAE Struck Cap. (cu. ft.) SAE Heaped Cap. (cu. ft.) LPLB-60 101491560 60 10.5 14.4 466 $ 1,159.00 LPLB-63 101491563 63 11.1 15.1 483 1,191.00 19.9 LPLB-66 101491566 66 11.6 15.9 500 1,231.00 LPLB-73 101491573 73 12.8 17.7 534 1,264.00 39.5 LPLB-78 101491578 78 13.7 19.0 591 1,482.00 LPLB-84 101491584 84 14.8 20.5 606 1,594.00 Description 1014175K 60 Bolt-on Cutting Edge Kit 61 $ 199.00 1015267K 63 Bolt-on Cutting Edge Kit 64 214.00 1014176K 66 Bolt-on Cutting Edge Kit 67 204.00 1014177K 73 Bolt-on Cutting Edge Kit 74 221.00 1014178K 78 Bolt-on Cutting Edge Kit 79 239.00 1014179K 84 Bolt-on Cutting Edge Kit 85 272.00 1016060 156-Series Top Pin Bolt-on Shank & Tooth Kit (7 teeth) 60 & 63 45 327.00 1016061 156-Series Top Pin Bolt-on Shank & Tooth Kit (8 teeth) 66 & 73 55 372.00 1016062 156-Series Top Pin Bolt-on Shank & Tooth Kit (9 teeth) 78 & 84 64 433.00 1023950 23-Series Side Pin Bolt-on Shank & Tooth Kit (7 teeth) 60 & 63 45 327.00 1023951 23-Series Side Pin Bolt-on Shank & Tooth Kit (8 teeth) 66 & 73 55 372.00 1023952 23-Series Side Pin Bolt-on Shank & Tooth Kit (9 teeth) 78 & 84 64 433.00 NOTE: All hardware needed to attach accessories to base bucket is supplied in kit. WARNING: Attachment selection and application must not exceed skid steer model rated operating loads or other specific requirements. All Operator s Manual and mounting instructions must be followed. 5-3
ALITEC SKID STEER ATTACHMENTS BUCKETS (Continued) HDLP-SERIES HEAVY-DUTY, LOW PROFILE CONSTRUCTION BUCKETS Universal coupler system (per SAE J2513) Heavy-duty, high strength construction No internal gussets or obstructions Square back for reverse grading Pre-drilled front cutting edge to accept bolt-on reversible cutting edge or bolt-on teeth (sold separately) Added wear plates for extended bucket life Optional standard-duty toothbars available (see pages 5-23 5-24) Alitec Gray color BASE BUCKET SHOWN WITH OPTIONAL BOLT-ON TEETH MIN. SKID STEER SAE LOAD RATING lbs. 2,125 2,350 2,525 2,700 in. 66 73 78 84 Bucket Profile Model No. Width (in.) SAE Struck Cap. (cu. ft.) SAE Heaped Cap. (cu. ft.) HDLP-66 101492066 66 11.9 15.8 597 $ 1,360.00 21.2 HDLP-73 101492073 73 13.2 17.6 616 1,435.00 HDLP-78 101492078 78 14.1 18.9 665 1,553.00 37.6 HDLP-84 101492084 84 15.2 20.4 721 1,652.00 Description 1014176K 66 Bolt-on Cutting Edge Kit 67 $ 204.00 1014177K 73 Bolt-on Cutting Edge Kit 74 221.00 1014178K 78 Bolt-on Cutting Edge Kit 79 239.00 1014179K 84 Bolt-on Cutting Edge Kit 85 272.00 1016061 156-Series Top Pin Bolt-on Shank & Tooth Kit (8 teeth) 66 & 73 55 372.00 1016062 156-Series Top Pin Bolt-on Shank & Tooth Kit (9 teeth) 78 & 84 64 433.00 1023951 23-Series Side Pin Bolt-on Shank & Tooth Kit (8 teeth) 66 & 73 55 372.00 1023952 23-Series Side Pin Bolt-on Shank & Tooth Kit (9 teeth) 78 & 84 64 433.00 NOTE: All hardware needed to attach accessories to base bucket is supplied in kit. WARNING: Attachment selection and application must not exceed skid steer model rated operating loads or other specific requirements. All Operator s Manual and mounting instructions must be followed. 5-4
ALITEC SKID STEER ATTACHMENTS BUCKETS (Continued) UT-SERIES UTILITY BUCKETS Universal coupler system (per SAE J2513) Heavy-duty construction No internal gussets or obstructions Square back for reverse grading Pre-drilled front cutting edge to accept bolt-on reversible cutting edge (sold separately) Higher capacity for utility and light material handling Alitec Gray color MIN. SKID STEER SAE LOAD RATING BASE BUCKET SHOWN WITH OPTIONAL BOLT-ON CUTTING EDGE lbs. 1,900 2,075 2,300 2,475 2,650 in. 60 66 73 78 84 Bucket Profile Model No. Width (in.) SAE Struck Cap. (cu. ft.) SAE Heaped Cap. (cu. ft.) UT-60 102400060 60 14.6 18.9 519 $ 1,403.00 UT-66 102400066 66 16.0 20.9 555 1,504.00 26.4 UT-73 102400073 73 17.8 23.2 588 1,570.00 UT-78 102400078 78 19.0 24.9 646 1,643.00 39.5 UT-84 102400084 84 20.5 26.9 677 1,732.00 Description 1014175K 60 Bolt-on Cutting Edge Kit 61 $ 199.00 1014176K 66 Bolt-on Cutting Edge Kit 67 204.00 1014177K 73 Bolt-on Cutting Edge Kit 74 221.00 1014178K 78 Bolt-on Cutting Edge Kit 79 239.00 1014179K 84 Bolt-on Cutting Edge Kit 85 272.00 NOTE: All hardware needed to attach accessories to base bucket is supplied in kit. WARNING: Attachment selection and application must not exceed skid steer model rated operating loads or other specific requirements. All Operator s Manual and mounting instructions must be followed. 5-5
ALITEC SKID STEER ATTACHMENTS BUCKETS (Continued) CASE -COMPATIBLE SKID STEER LOADER BUCKETS Universal coupler system (per SAE J2513) Heavy-duty construction No internal gussets or obstructions Square back for reverse grading Pre-drilled front Case-style cutting edge to accept bolt-on reversible cutting edge (sold separately) Model No. Width (in.) No. of Holes & Hole Spacing SAE Heaped Cap. (cu. ft.) Comparable Alitec Model CSB73 1 102404673 73 CSB84 1 102404684 84 CLB73 2 102404773 73 CLB84 2 102404784 84 CHD73 3 102404873 73 CHD84 3 102404884 84 CUT73 4 102404973 73 CUT84 4 102404984 84 (12) 11/16 Ø holes on 6 centers (9) 11/16 Ø holes on 9.5 centers (12) 11/16 Ø holes on 6 centers (9) 11/16 Ø holes on 9.5 centers (12) 11/16 Ø holes on 6 centers (9) 11/16 Ø holes on 9.5 centers (12) 11/16 Ø holes on 6 centers (9) 11/16 Ø holes on 9.5 centers 14.6 510 LPSB73 $ 1,191.00 16.9 561 LPSB84 1,482.00 17.7 534 LPLB73 1,264.00 20.5 606 LPLB84 1,594.00 17.6 616 HDLP73 1,435.00 20.4 721 HDLP84 1,652.00 23.2 588 UT73 1,570.00 26.9 677 UT84 1,732.00 1. Refer to LPSB-series bucket profile on page 5-2. 2. Refer to LPLB-series bucket profile on page 5-3. 3. Refer to HDLP-series bucket profile on page 5-4. 4. Refer to UT-series bucket profile on page 5-5. Description 52676K 73 Bolt-on Cutting Edge Kit (12) 11/16 Ø holes on 6 centers 74 $ 238.00 1024030K 84 Bolt-on Cutting Edge Kit (9) 11/16 Ø holes on 9-1/2 centers 85 336.00 NOTE: All hardware needed to attach accessories to base bucket is supplied in kit. WARNING: Attachment selection and application must not exceed skid steer model rated operating loads or other specific requirements. All Operator s Manual and mounting instructions must be followed. 5-6
ALITEC SKID STEER ATTACHMENTS BUCKETS (Continued) HC-SERIES HIGH CAPACITY, LIGHT MATERIAL BUCKETS Universal coupler system (per SAE J2513) Heavy-duty construction No internal gussets or obstructions Square back for reverse grading Pre-drilled front cutting edge to accept bolt-on reversible cutting edge (sold separately) Ultra high capacity for light material handling Alitec Gray color MIN. SKID STEER SAE LOAD RATING BASE BUCKET SHOWN WITH OPTIONAL BOLT-ON CUTTING EDGE lbs. 1,575 1,725 1,875 2,000 in. 66 73 78 84 Bucket Profile Model No. Width (in.) SAE Struck Cap. (cu. ft.) SAE Heaped Cap. (cu. ft.) HC-66 102400166 66 25.2 32.0 660 $ 1,863.00 36.5 HC-73 102400173 73 27.9 35.6 690 1,805.00 HC-78 102400178 78 29.8 38.2 758 1,913.00 43.5 HC-84 102400184 84 32.1 41.3 798 2,055.00 Description 1014176K 66 Bolt-on Cutting Edge Kit 67 $ 204.00 1014177K 73 Bolt-on Cutting Edge Kit 74 221.00 1014178K 78 Bolt-on Cutting Edge Kit 79 239.00 1014179K 84 Bolt-on Cutting Edge Kit 85 272.00 NOTE: All hardware needed to attach accessories to base bucket is supplied in kit. WARNING: Attachment selection and application must not exceed skid steer model rated operating loads or other specific requirements. All Operator s Manual and mounting instructions must be followed. 5-7
ALITEC SKID STEER ATTACHMENTS BROOMS Universal skid steer quick coupler mount (per SAE J2513) 32-inch diameter, quick change broom core Standard 6- and 7-foot brush; 30-degree angle, left or right Mechanical or hydraulic angle adjustment Heavy-duty construction, including hydraulic components Double versatility of existing equipment by using equipment already at a job site Hydraulic flow requirement: 12 25 gpm @ 2000 3000 psi AB-SERIES ANGLE BROOMS Model No. Description Width (in.) 1026750 AB720-2 72 Sweeping Path, mechanical angle adjustment 72 922 $ 6,263.00 1026751 AB840-2 84 Sweeping Path, mechanical angle adjustment 84 915 6,830.00 1022255 AB720H-2 72 Sweeping Path, hydraulic angle adjustment 72 874 7,910.00 1022256 AB840H-2 84 Sweeping Path, hydraulic angle adjustment 84 937 8,477.00 1031220 Harness, Hydraulic Angle Broom 7 $ 353.00 NOTES: Includes hydraulic couplers, per ISO standard 16028. Additional hydraulic couplers available. See Quick-Disconnect Coupler Kits on page 5-22. Hydraulic broom angle models include electro-hydraulic valve for cylinder actuation. Must order 1031220 harness to complete. Two sweeping directions forward and reverse 26-inch broom diameter Bolt-on cutting edge to scrape hard packed mud before sweeping Lightweight construction allows mounting on skid steers with lighter lift capabilities Optional gutter broom for sweeping next to curbs or other vertical surfaces Hydraulic flow requirement: 12 25 gpm @ 2000 3000 psi Bucket capacity: 13.9 cu.ft. for PB600-2; 16.8 cu.ft. for PB720-2y PB-SERIES PICK-UP BROOMS Model No. Description Width (in.) 1027500 PB600-2 60 Sweeping Path, sweeps in both directions, includes bolt-on edge 66 928 $ 4,622.00 1027501 PB720-2 72 Sweeping Path, sweeps in both directions, includes bolt-on edge 78 1040 5,047.00 1016016 Gutter Broom Poly Black 92 $ 1,381.00 NOTES: Includes hydraulic couplers, per ISO standard 16028. Additional hydraulic couplers available. See Quick-Disconnect Coupler Kits on page 5-22. WARNING: Attachment selection and application must not exceed skid steer model rated operating loads or other specific requirements. All Operator s Manual and mounting instructions must be followed. 5-8
ALITEC SKID STEER ATTACHMENTS COLD PLANERS COLD PLANER FOR STANDARD-FLOW SKID STEERS Operates on standard auxiliary hydraulics Hydraulic side-shift (up to 22 inches) Manual depth (up to 5 inches) Manual tilt Front and rear wheels Universal quick-attach brackets (per SAE J2513) Low speed, high torque drive motor Hydraulic hoses and QD couplers (per ISO 16028) included Pick removal tool Powder coat paint Welded to American Welding Society standards APPLICATIONS: Curb cuts (wedge cuts) Butt joints Pothole repair Milling of frost heaves in pavement Re-establish proper drainage characteristics of pavement Texture pavement for skid resistance Remove asphalt around manholes and storm drains prior to overlay Traffic stripe removal Mill small areas inaccessible by larger dedicated planers BASE UNIT Model No. Description Flow (gpm) / Pressure (psi) CP12LFA Cold Planer 13 23 / 1500 3000 Drum Width (in.) No. of Picks Max. Tilt 12 36 ±19 1300 $ 11,111.00 1031206 Fine Finish Drum Assembly $ 8,947.00 CD6012X12LF 6 Step Drum Assembly (Converts 12 cutting width to 6 ) 1,959.00 WK26 Water Kit 26 Gallon Tank (Gravity feed) 46 1,173.00 WK50 Water Kit 50 Gallon Tank (Gravity feed) 100 1,392.00 NOTES: Specify make, model, flow and pressure of skid steer when ordering. Additional QD couplers available for older models. See Quick-Disconnect Coupler Kits on page 5-22. 5-9
ALITEC SKID STEER ATTACHMENTS COLD PLANERS (Continued) COLD PLANERS FOR HIGH-FLOW SKID STEERS Hydraulic depth up to 6 inches 22-inch Hydraulic side-shift Top center pivot design Front and rear cast wheels Dual depth cylinders Universal quick-attach hitch (per SAE J2513) Double reduction planetary drive Debris guards Hydraulic hoses included Top accessible drum Pick removal tool Powder coat paint Welded to American Welding Society standards OPTIONAL Electro-hydraulic controls for tilt, depth and side-shift Electric wiring harness to match host machine APPLICATIONS: For asphalt and concrete applications Curb cuts (wedge cuts) Butt joints Pothole repair Milling of frost heaves in pavement Re-establish proper drainage characteristics of pavement Texture pavement for skid resistance Remove asphalt around manholes and storm drains prior to overlay Traffic stripe removal (fine finish) Mill small areas inaccessible by larger dedicated planers Full depth utility cuts prior to installation or repair of gas, sewer and water lines Bridge deck planing due to weight restrictions of larger planers BASE UNIT Model No. CP16ATDALITEC Description Cold Planer for skid steer models with dualcircuit auxiliary hydraulics. Includes electric solenoid valve for remote cylinder actuation. Wiring harness sold separately. Flow (gpm) / Pressure (psi) Drum Width (in.) No. of Picks Max. Tilt 22 32 / 2000 3500 16 44 ±15 1750 $ 17,718.00 OPTIONAL BASE UNIT MODEL CONFIGURATIONS CP16AMH Same as CP16ATDALITEC except with manual controls for auxiliary circuit actuation. 1750 $ 21,653.00 CP16AMHXT Same as CP16AMH except for skid steers with auxiliary pump outputs of >32 gpm. 1750 21,653.00 CP16AMHXTP Same as CP16AMH except for skid steers with auxiliary pump outputs of >32 gpm & >3500 psi. 1750 21,653.00 CP16ATDXT Same as CP16ATDALITEC except for skid steers with auxiliary pump outputs of >32 gpm. 1750 17,718.00 CP16ATDXTP Same as CP16ATDALITEC except for skid steers w/auxiliary pump outputs of >32 gpm & >3500 psi. 1750 17,718.00 CP16ATD/S/C Same as CP16ATDALITEC model except for skid steers with single-circuit auxiliary hydraulics. 1750 17,718.00 ADDITIONS TO BASE UNIT MODELS EQUIPPED WITH ELECTRIC CONTROLS (Order One) Wiring harness to fit pre-wired skid steers (Single-circuit and dual-circuit applications) 1.2 $ 139.00 E0066 Wiring harness complete with magnetic base control box (Dual-circuit application) 3.4 347.00 E0042 Wiring harness complete with joystick control (Single-circuit application) 4.5 1,039.00 1031207 Fine Finish Drum Assembly $ 10,483.00 CD2516X16 2-1/2 Step Drum Assembly (Converts 16 cutting width to 2-1/2 ) 5,964.00 CD4016X16 4 Step Drum Assembly (Converts 16 cutting width to 4 ) 1,680.00 CD6016X16 6 Step Drum Assembly (Converts 16 cutting width to 6 ) 137 4,473.00 CD1216X16 12 Step Drum Assembly (Converts 16 cutting width to 12 ) 5,076.00 WK26 Water Kit 26 Gallon Tank (Gravity feed) 46 1,173.00 WK50 Water Kit 50 Gallon Tank (Gravity feed) 100 1,392.00 Skid Steer High-Flow Planers continued on following page. 5-10
ALITEC SKID STEER ATTACHMENTS COLD PLANERS (Continued) COLD PLANERS FOR HIGH-FLOW SKID STEERS (Continued) BASE UNIT Model No. Description Flow (gpm) / Pressure (psi) Drum Width (in.) No. of Picks Max. Tilt CP18ATDALITEC Cold Planer for skid steer models with dualcircuit auxiliary hydraulics. Includes electric solenoid valve for remote cylinder actuation. Wiring harness sold separately. 25 32 / 2000 3500 18 48 ±15 1801 $ 18,281.00 OPTIONAL BASE UNIT MODEL CONFIGURATIONS CP18AMH Same as CP18ATDALITEC except with manual controls for auxiliary circuit actuation. 2000 $ 17,718.00 CP18AMHXT Same as CP18AMH except for skid steers with auxiliary pump outputs of >32 gpm. 2000 17,718.00 CP18AMHXTP Same as CP18AMH except for skid steers with auxiliary pump outputs of >32 gpm & >3500 psi. 2000 17,718.00 CP18ATDXT Same as CP18ATDALITEC except for skid steers with auxiliary pump outputs of >32 gpm. 2000 18,281.00 CP18ATDXTP Same as CP18ATDALITEC except for skid steers w/auxiliary pump outputs of >32 gpm & >3500 psi. 1718 18,281.00 CP18ATD/S/C Same as CP18ATDALITEC model except for skid steers with single-circuit auxiliary hydraulics. 1798 18,281.00 CP18ATDXTS/C Same as CP18ATDXT except for skid steers with single-circuit auxiliary hydraulics. 1726 18,281.00 ADDITIONS TO BASE UNIT MODELS EQUIPPED WITH ELECTRIC CONTROLS (Order One) Wiring harness to fit pre-wired skid steers (Single-circuit and dual-circuit applications) 1.2 $ 139.00 E0066 Wiring harness complete with magnetic base control box (Dual-circuit application) 3.4 347.00 E0042 Wiring harness complete with joystick control (Single-circuit application) 4.5 1,039.00 1031208 Fine Finish Drum Assembly $ 15,714.00 CD2518X16 2-1/2 Step Drum Assembly (Converts 18 cutting width to 2-1/2 ) 225 6,618.00 CD4018X16 4 Step Drum Assembly (Converts 18 cutting width to 4 ) 1,737.00 CD6018X16 6 Step Drum Assembly (Converts 18 cutting width to 6 ) 2,261.00 CD1218X16 12 Step Drum Assembly (Converts 18 cutting width to 12 ) 2,783.00 1011298 Paint Stripe Removal Drum (18 cutting width) 15,537.00 WK26 Water Kit 26 Gallon Tank (Gravity feed) 46 1,173.00 WK50 Water Kit 50 Gallon Tank (Gravity feed) 100 1,392.00 Skid Steer High-Flow Planers continued on following page. 5-11
ALITEC SKID STEER ATTACHMENTS COLD PLANERS (Continued) COLD PLANERS FOR HIGH-FLOW SKID STEERS (Continued) BASE UNIT Model No. Description Flow (gpm) / Pressure (psi) Drum Width (in.) No. of Picks Max. Tilt CP24ATDALITEC Cold Planer for skid steer models with dualcircuit auxiliary hydraulics. Includes electric solenoid valve for remote cylinder actuation. Wiring harness sold separately. 28 32 / 2200 3500 24 62 ±15 1919 $ 19,967.00 OPTIONAL BASE UNIT MODEL CONFIGURATIONS CP24AMH Same as CP24ATDALITEC except with manual controls for auxiliary circuit actuation. 2300 $ 19,407.00 CP24AMHXT Same as CP24AMH except for skid steers with auxiliary pump outputs of >32 gpm. 2300 19,407.00 CP24AMHXTP Same as CP24AMH except for skid steers with auxiliary pump outputs of >32 gpm & >3500 psi. 2300 19,407.00 CP24ATDXT Same as CP24ATDALITEC except for skid steers with auxiliary pump outputs of >32 gpm. 2300 19,967.00 CP24ATDXTS/C Same as CP24ATDALITEC except for skid steers with auxiliary pump outputs of >32 gpm & singlecircuit 2300 19,967.00 auxiliary hydraulics. CP24ATDXTP Same as CP24ATDALITEC except for skid steers w/auxiliary pump outputs of >32 gpm & >3500 psi. 2032 19,967.00 CP24ATD/S/C Same as CP24ATDALITEC model except for skid steers with single-circuit auxiliary hydraulics. 1906 19,967.00 ADDITIONS TO BASE UNIT MODELS EQUIPPED WITH ELECTRIC CONTROLS (Order One) Wiring harness to fit pre-wired skid steers (Single-circuit and dual-circuit applications) 1.2 $ 139.00 E0066 Wiring harness complete with magnetic base control box (Dual-circuit application) 3.4 347.00 E0042 Wiring harness complete with joystick control (Single-circuit application) 4.5 1,039.00 1031209 Fine Finish Drum Assembly $ 17,090.00 CD2524X16 2-1/2 Step Drum Assembly (Converts 24 cutting width to 2-1/2 ) 3,748.00 CD4024X16 4 Step Drum Assembly (Converts 24 cutting width to 4 ) 1,937.00 CD6024X16 6 Step Drum Assembly (Converts 24 cutting width to 6 ) 2,372.00 CD1224X16 12 Step Drum Assembly (Converts 24 cutting width to 12 ) 3,098.00 CD1624X16 16 Step Drum Assembly (Converts 24 cutting width to 16 ) 3,479.00 1011321 Paint Stripe Removal Drum (24 cutting width) 17,419.00 WK26 Water Kit 26 Gallon Tank (Gravity feed) 46 1,173.00 WK50 Water Kit 50 Gallon Tank (Gravity feed) 100 1,392.00 Skid Steer High-Flow Planers continued on following page. 5-12
ALITEC SKID STEER ATTACHMENTS COLD PLANERS (Continued) COLD PLANERS FOR HIGH-FLOW SKID STEERS (Continued) BASE UNIT Model No. Description Flow (gpm) / Pressure (psi) Drum Width (in.) No. of Picks Max. Tilt CP30ATDALITEC Cold Planer for skid steer models with dualcircuit auxiliary hydraulics. Includes electric solenoid valve for remote cylinder actuation. Wiring harness sold separately. 30 32 / 2500 3500 30 74 ±15 2450 $ 23,033.00 OPTIONAL BASE UNIT MODEL CONFIGURATIONS CP30AMH Same as CP30ATDALITEC except with manual controls for auxiliary circuit actuation. 2450 $ 22,480.00 CP30AMHXT Same as CP30AMH except for skid steers with auxiliary pump outputs of >32 gpm. 2450 22,480.00 CP30AMHXTP Same as CP30AMH except for skid steers with auxiliary pump outputs of >32 gpm & >3500 psi. 2450 22,480.00 CP30ATDXT Same as CP30ATDALITEC except for skid steers with auxiliary pump outputs of >32 gpm. 2450 23,033.00 CP30ATDXTP Same as CP30ATDALITEC except for skid steers w/auxiliary pump outputs of >32 gpm & >3500 psi. 2450 23,033.00 CP30ATD/S/C Same as CP30ATDALITEC model except for skid steers with single-circuit auxiliary hydraulics. 2450 23,033.00 ADDITIONS TO BASE UNIT MODELS EQUIPPED WITH ELECTRIC CONTROLS (Order One) Wiring harness to fit pre-wired skid steers (Single-circuit and dual-circuit applications) 1.2 $ 139.00 E0066 Wiring harness complete with magnetic base control box (Dual-circuit application) 3.4 347.00 E0042 Wiring harness complete with joystick control (Single-circuit application) 4.5 1,039.00 CD2530X16 2-1/2 Step Drum Assembly (Converts 30 cutting width to 2-1/2 ) $ 1,657.00 CD4030X16 4 Step Drum Assembly (Converts 30 cutting width to 4 ) 2,054.00 CD6030X16 6 Step Drum Assembly (Converts 30 cutting width to 6 ) 2,459.00 CD1230X16 12 Step Drum Assembly (Converts 30 cutting width to 12 ) 3,236.00 CD1630X16 16 Step Drum Assembly (Converts 30 cutting width to 16 ) 3,600.00 CD2430X16 24 Step Drum Assembly (Converts 30 cutting width to 24 ) 4,685.00 WK26 Water Kit 26 Gallon Tank (Gravity feed) 46 1,173.00 WK50 Water Kit 50 Gallon Tank (Gravity feed) 100 1,392.00 NOTES: Specify make, model, flow and pressure of skid steer when ordering. Hydraulic couplers sold separately. See Quick-Disconnect Coupler Kits on page 5-22. Skid Steer High-Flow Planers continued on following page. 5-13
ALITEC SKID STEER ATTACHMENTS COLD PLANERS (Continued) COLD PLANERS FOR HIGH-FLOW SKID STEERS (Continued) Hydraulic depth up to 8 inches 22-inch Hydraulic side-shift Heavy-duty skid shoes Top center pivot design Front and rear cast wheels Dual depth cylinders Universal quick-attach hitch Double reduction planetary drive Debris guards Hydraulic hoses included Pick removal tool Powder coat paint Welded to American Welding Society standards OPTIONAL Electro-hydraulic controls for tilt, depth and side-shift Electric wiring harness to match host machine APPLICATIONS: For asphalt and concrete applications Curb cuts (wedge cuts) Butt joints Pothole repair Milling of frost heaves in pavement Re-establish proper drainage characteristics of pavement Texture pavement for skid resistance Remove asphalt around manholes and storm drains prior to overlay Mill small areas inaccessible by larger dedicated planers Full depth utility cuts prior to installation or repair of gas, sewer and water lines Bridge deck planing due to weight restrictions of larger planers BASE UNIT Model No. CP40G Description Cold Planer for skid steer models with dualcircuit auxiliary hydraulics. Includes electric solenoid valve for remote cylinder actuation. Wiring harness sold separately. Flow (gpm) / Pressure (psi) Drum Width (in.) No. of Picks Max. Tilt > 33 / 3000 40 94 ±10 3200 $ 28,689.00 OPTIONAL BASE UNIT MODEL CONFIGURATIONS CP40P Same as CP40G except for skid steers with auxiliary pump outputs of >3,500 psi. 3200 $ 28,689.00 CP40S/C Same as CP40G except for skid steers with single-circuit auxiliary hydraulics. 3473 28,689.00 ADDITIONS TO BASE UNIT MODELS (Order One) Wiring harness to fit pre-wired skid steers (Single-circuit and dual-circuit applications) 1.2 $ 139.00 E0066 Wiring harness complete with magnetic base control box (Dual-circuit application) 3.4 347.00 E0042 Wiring harness complete with joystick control (Single-circuit application) 4.5 1,039.00 1022803 16 Step Drum Assembly (Converts 40 cutting width to 16 ) 667 $ 8,081.00 WK26 Water Kit 26 Gallon Tank (Gravity feed) 46 1,173.00 WK50 Water Kit 50 Gallon Tank (Gravity feed) 100 1,392.00 NOTES: Specify make, model, flow and pressure of skid steer when ordering. Hydraulic couplers sold separately. See Quick-Disconnect Coupler Kits on page 5-22. 5-14
ALITEC SKID STEER ATTACHMENTS PAVEMENT SAWS PS-SERIES PAVEMENT SAWS 9-inch cutting depth Hydraulic side-shift up to 22 inches Manual depth control Hydraulic hoses included Pick removal tool Powder coat paint Optional electric wiring harness Welded to American Welding Society standards APPLICATIONS: Asphalt patch cuts Create expansion joints in pavement Pavement cuts for traffic loops Utility or municipal public works projects BASE UNIT Model No. Description Flow (gpm) / Pressure (psi) No. of Picks Max. Cutting Depth (in.) Max. Cut. Width (in.) PS915MD Pavement Saw for skid steer models with auxiliary hydraulics. Includes manual selector valve for remote cylinder actuation. Unit is equipped with manual depth control. 25 42 / 2250 3500 36 9 1-1/2 1300 $ 10,614.00 PS915HD Same as PS915MD except with hydraulic depth control and electric solenoid valve for remote cylinder actuation. Wiring harness sold separately. 25 42 / 2250 3500 36 9 1-1/2 1300 11,028.00 PS915HDS/C Same as PS915HD except for skid steers with single-circuit auxiliary hydraulics. 25 42 / 2250 3500 36 9 1-1/2 1300 11,028.00 PS925MD Pavement Saw for skid steer models with auxiliary hydraulics. Includes manual selector valve for remote cylinder actuation. Unit is equipped with manual depth control. 25 42 / 2250 3500 28 9 2-1/2 1300 11,166.00 PS925HD Same as PS925MD except with hydraulic depth control and electric solenoid valve for remote cylinder actuation. Wiring harness sold separately. 25 42 / 2250 3500 28 9 2-1/2 1300 11,578.00 PS925HDS/C Same as PS925HD except for skid steers with single-circuit auxiliary hydraulics. 25 42 / 2250 3500 28 9 2-1/2 1300 11,578.00 PS945MD Pavement Saw for skid steer models with auxiliary hydraulics. Includes manual selector valve for remote cylinder actuation. Unit is equipped with manual depth control. 25 42 / 2250 3500 33 9 4-1/2 1400 11,716.00 PS945HD Same as PS945MD except with hydraulic depth control and electric solenoid valve for remote cylinder actuation. Wiring harness sold separately. 25 42 / 2250 3500 33 9 4-1/2 1400 12,130.00 PS945HDS/C Same as PS945HD except for skid steers with single-circuit auxiliary hydraulics. 25 42 / 2250 3500 33 9 4-1/2 1400 12,130.00 ADDITIONS TO BASE UNIT MODELS EQUIPPED WITH HYDRAULIC DEPTH (Order One) Description Wiring harness to fit pre-wired skid steers (Single-circuit and dual-circuit applications) 1.2 $ 139.00 E0066 Wiring harness complete with magnetic base control box (Dual-circuit application) 3.4 347.00 E0042 Wiring harness complete with joystick control (Single-circuit application) 4.5 1,039.00 NOTES: Specify make, model, flow and pressure of skid steer when ordering. All Pavement Saw models require a case drain. Hydraulic couplers sold separately. See Quick-Disconnect Coupler Kits on page 5-22. 5-15
ALITEC SKID STEER ATTACHMENTS ROCK WHEELS Electro-hydraulic controls: depth and sideshift Hydraulic side-shift up to 22 inches Hydraulic depth adjustment Universal quick-attach brackets (per SAE J2513) Double reduction planetary drive Hydraulic hoses included Pick removal tool Electrical wiring harness Powder coat paint Welded to American Welding Society standards BASE UNIT Model No. RW1225ALITEC RW1225ALITECS/C RW1245ALITEC RW1245ALITECS/C RW1825ALITEC RW1825ALITECS/C RW1845ALITEC RW1845ALITECS/C RW2425ALITEC RW2425ALITECS/C RW2445ALITEC RW2445ALITECS/C Description Rock Wheel for skid steer models with dualcircuit auxiliary hydraulics. Same as RW1225ALITEC except for skid steers with single-circuit auxiliary hydraulics. Rock Wheel for skid steer models with dualcircuit auxiliary hydraulics. Same as RW1245ALITEC except for skid steers with single-circuit auxiliary hydraulics. Rock Wheel for skid steer models with dualcircuit auxiliary hydraulics. Same as RW1825ALITEC except for skid steers with single-circuit auxiliary hydraulics. Rock Wheel for skid steer models with dualcircuit auxiliary hydraulics. Same as RW1845ALITEC except for skid steers with single-circuit auxiliary hydraulics. Rock Wheel for skid steer models with dualcircuit auxiliary hydraulics. Same as RW2425ALITEC except for skid steers with single-circuit auxiliary hydraulics. Rock Wheel for skid steer models with dualcircuit auxiliary hydraulics. Same as RW2445ALITEC except for skid steers with single-circuit auxiliary hydraulics. RW-SERIES ROCK WHEELS APPLICATIONS: Asphalt patch cuts Create expansion joints in roadways Utility cuts for gas, sewer, water, electrical, cable installation and repair Optimum Flow (gpm) / Pressure (psi) 24 47 / 2000 3500 24 47 / 2000 3500 24 47 / 2000 3500 24 47 / 2000 3500 26 47 / 2500 3500 26 47 / 2500 3500 26 47 / 2500 3500 26 47 / 2500 3500 30 47 / 3000 3500 30 47 / 3000 3500 30 47 / 3000 3500 30 47 / 3000 3500 No. of Picks Max. Cut. Depth (in.) Cutting Width (in.) 32 12 2-1/2 1600 $ 17,643.00 32 12 2-1/2 1600 17,643.00 38 12 4-1/2 1650 18,056.00 38 12 4-1/2 1650 18,056.00 44 18 2-1/2 1800 19,020.00 44 18 2-1/2 1800 19,020.00 44 18 4-1/2 1850 19,574.00 44 18 4-1/2 1850 19,574.00 54 24 2-1/2 2000 19,606.00 54 24 2-1/2 2000 19,606.00 57 24 4-1/2 2545 20,146.00 57 24 4-1/2 2545 20,146.00 ADDITIONS TO BASE UNIT MODELS EQUIPPED WITH HYDRAULIC DEPTH (Order One) Wiring harness to fit pre-wired skid steers (Single-circuit and dual-circuit applications) 1.2 $ 139.00 E0066 Wiring harness complete with magnetic base control box (Dual-circuit applications) 3.4 347.00 E0042 Wiring harness complete with joystick control (Single-circuit applications) 4.5 1,039.00 WK26 Water Kit 26 Gallon Tank (Gravity feed) 46 $ 1,173.00 WK50 Water Kit 50 Gallon Tank (Gravity feed) 100 1,392.00 NOTES: Specify make, model, flow and pressure of skid steer when ordering. All Rock Wheel models require a case drain. Hydraulic couplers sold separately. See Quick-Disconnect Coupler Kits on page 5-22. 5-16
ALITEC SKID STEER ATTACHMENTS STUMP GRINDERS SG-SERIES STUMP GRINDERS 90 hydraulic swing control 16-inch below grade hydraulic depth control 14-inch hydraulic head extension Universal quick attach bracket (per SAE J2513) Hydraulic hoses included QD couplers included (SG20 & SG40 models only) Adjustable manual control valve Debris guard Removable wheel shroud Powder coat paint Welded to American Welding Society standards Shipped fully assembled OPTIONAL Electro-hydraulic controls for depth, swing and extend Electric wiring harness to match host machine APPLICATIONS: Stump grinding in residential, commercial and agricultural areas BASE UNIT Model No. Description Case Drain No. of Bits Flow (gpm) / Pressure (psi) SG20B Stump Grinder for skid steer models with auxiliary hydraulics, manual control. Equipped with 3-spool hydraulic valve for depth, swing & telescoping function control. No 24 12 25 / 2000 3000 922 $ 7,015.00 SG20BES/C Same as SG20B except for skid steers with single-circuit auxiliary hydraulics and electric control. No 24 12 25 / 2000 3000 922 7,360.00 SG40B Stump Grinder for skid steer models with auxiliary hydraulics, manual control. Equipped with 3-spool hydraulic valve for depth, swing & telescoping function control. No 24 20 30 / 2000 3500 922 7,239.00 SG40BE Same as SG40B except for skid steers with dual-circuit auxiliary hydraulics and electric control. No 24 20 30 / 2000 3500 922 7,582.00 SG40BES/C Same as SG40B except for skid steers with single-circuit auxiliary hydraulics and electric control. No 24 20 30 / 2000 3500 922 7,582.00 SG60B Stump Grinder for skid steer models with auxiliary hydraulics, manual control. Equipped with 3-spool hydraulic valve for depth, swing & telescoping function control. Yes 24 30 46 / 2000 5000 1050 9,046.00 SG60BE Same as SG60B except for skid steers with dual-circuit auxiliary hydraulics and electric control. Yes 24 30 46 / 2000 5000 1050 9,368.00 SG60BES/C Same as SG60B except for skid steers with single-circuit auxiliary hydraulics and electric control. Yes 24 30 46 / 2000 5000 1050 9,368.00 ADDITIONS TO BASE UNIT MODELS EQUIPPED WITH ELECTRIC CONTROLS (Order One) Product Code Description Wiring harness to fit pre-wired skid steers (Single-circuit and dual-circuit applications) 1.2 $ 139.00 E0066 Wiring harness complete with control box (Dual-circuit applications) 3.4 347.00 E0042 Wiring harness complete with joystick control (Single-circuit applications) 4.5 1,039.00 S ) NOTES: Specify make, model, flow and pressure of skid steer when placing order. Hydraulic hoses and flat-faced couplers included with stump grinder. Other styles of quick-disconnect couplers available, see Quick Disconnect Coupler Kits on page 5-22. 5-17
ALITEC SKID STEER ATTACHMENTS VIBRATORY ROLLERS VR-SERIES VIBRATORY ROLLERS Operates on standard auxiliary hydraulics Shaft bearings lubricated in oil bath Smooth or sheepsfoot padded drum ±15 free floating pivot Drum scraper bar Universal quick attach brackets (per SAE J2513) Hydraulic hoses and QD couplers included Powder coat paint Welded to American Welding Society standards Shipped fully assembled APPLICATIONS: Compact sand, gravel or dirt prior to asphalt or concrete overlay Suited for compaction of sand, gravel or dirt when backfilling against new foundations and other concrete structures BASE UNIT Flow (gpm) / Model No. Description Pressure (psi) VR48ASALITEC Vibratory Roller with 48 Smooth Drum 11 23 / 1500 3200 1181 $ 10,578.00 VR48APALITEC Vibratory Roller with 48 Padded Drum 11 23 / 1500 3200 1320 11,179.00 VR66ASALITEC Vibratory Roller with 66 Smooth Drum 11 23 / 1500 3200 1704 11,516.00 VR66APALITEC Vibratory Roller with 66 Padded Drum 11 23 / 1500 3200 1733 12,291.00 VR73ASALITEC Vibratory Roller with 73 Smooth Drum 11 23 / 1500 3200 1762 12,709.00 VR73APALITEC Vibratory Roller with 73 Padded Drum 11 23 / 1500 3200 1862 13,379.00 VR84ASALITEC Vibratory Roller with 84 Smooth Drum 11 23 / 1500 3200 1783 14,462.00 VR84APALITEC Vibratory Roller with 84 Padded Drum 11 23 / 1500 3200 1998 14,996.00 1012104 Hydraulic Priority Flow Kit * 21 $ 623.00 * Required for skid steers with more than 23 gpm. NOTES: Specify make, model, flow and pressure of skid steer when ordering. Additional QD couplers available for older models. See Quick-Disconnect Coupler Kits on page 5-22. 5-18
ALITEC SKID STEER ATTACHMENTS TILLERS TL-SERIES TILLERS Standard-flow and high-flow models Adjustable to 6-inch depth Universal quick attach bracket (per SAE J2513) Dual drive motor Hydraulic hoses and QD couplers included Recessed drive motors Powder coat paint Welded to American Welding Society standards Shipped fully assembled APPLICATIONS: Mix soils for improved seed beds, soil stabilization Till construction sites Till prior to landscaping BASE UNIT Product Code Description Min. Flow (gpm) / Pressure (psi) Cutting Width (in.) No. of Tines TL52AALITEC Tiller 12 40 / 1800 3000 52 24 510 $ 5,950.00 TL73AALITEC Tiller 18 40 / 2000 3000 73 36 750 6,491.00 TL84AALITEC Tiller 24 60 / 3000 4000 84 40 825 7,842.00 S NOTES: Specify make, model, flow and pressure of skid steer when ordering. Additional QD couplers available for older models and higher flow applications. See Quick-Disconnect Coupler Kits on page 5-22. 5-19
ALITEC SKID STEER ATTACHMENTS AUGERS AUGERS, PLANETARY DRIVE SKID STEER MOUNTED Hydraulic drive unit Universal quick-attach bracket (per SAE J2513) 2-inch hex output shaft 2-9/16-inch round output shaft Hydraulic hoses and QD couplers (per ISO standard 16028) included on HA15 & HA20 models Hydraulic hoses included on HA30 & HA35 models All auger bit diameters are suitable for each auger model Powder coat paint Welded to American Welding Society standards Shipped fully assembled APPLICATIONS: Drill holes for posts, deck footers, trees, signs, shrubs and soil sampling BASE UNIT Description Case Drain Output Flow Range (gpm) Pressure Range (psi) HA15E E Series Auger Planetary Drive No hex 15 25 1500 3750 329 $ 2,621.00 HA20E E Series Auger Planetary Drive No hex 20 30 1500 3750 329 2,838.00 HA20ER E Series Auger Planetary Drive No round 20 30 1500 3750 329 2,838.00 HA30E E Series Auger Planetary Drive Yes hex 30 40 1500 5000 490 4,502.00 HA35E E Series Auger Planetary Drive Yes hex 35 45 1500 5000 495 4,829.00 OPTIONS TO BASE UNIT MODELS 2-9/16 Round Collar 2 Hex Collar Description No. of Teeth Per Auger FA6 FAH6 Double Flighted Auger 6 dia. x 50 long 2 54 $ 320.00 FA9 FAH9 Double Flighted Auger 9 dia. x 50 long 4 80 484.00 FA12 FAH12 Double Flighted Auger 12 dia. x 50 long 4 104 521.00 FA15 FAH15 Double Flighted Auger 15 dia. x 50 long 5 117 598.00 FA18 FAH18 Double Flighted Auger 18 dia. x 50 long 6 137 699.00 FA24 FAH24 Double Flighted Auger 24 dia. x 50 long 8 214 888.00 FA30 FAH30 Double Flighted Auger 30 dia. x 50 long 10 280 1,042.00 FA36 FAH36 Double Flighted Auger 36 dia. x 50 long 12 385 1,390.00 FA24TR FAH24TR Double Flighted Tree Auger 12 /24 dia. x 50 long 9 209 961.00 FA30TR FAH30TR Double Flighted Tree Auger 15 /30 dia. x 50 long 11 240 1,101.00 FA36TR FAH36TR Double Flighted Tree Auger 18 /36 dia. x 50 long 12 315 1,279.00 OPTIONAL FEX12 Extension Round, 12 25 $ 376.00 FEX24 Extension Round, 24 40 415.00 FEX48 Extension Round, 48 49 692.00 FEXH12 Extension Hex, 12 25 277.00 FEXH24 Extension Hex, 24 45 415.00 FEXH48 Extension Hex, 48 49 692.00 S0100550 Converter Hex to Round 23 347.00 S0100551 Converter Round to Hex 23 347.00 NOTES: Specify make, model, flow and pressure of skid steer when ordering. QD coupler kits available for most skid steer models. See Quick-Disconnect Coupler Kits on page 5-22. Large diameter augers may not provide sufficient clearance on some skid steers with short-coupled mounts. 5-20
ALITEC SKID STEER ATTACHMENTS AUGERS (Continued) AUGERS, PLANETARY DRIVE COMPACT Alitec Discounts EXCAVATOR Apply AND BACKHOE MOUNTED Hydraulic drive unit Attach cradle Planetary drive 2-inch hex output shaft Hydraulic hoses included All auger bit diameters are suitable for each auger model Powder coat paint Welded to American Welding Society standards BASE UNIT Description APPLICATIONS: Drill holes for posts, deck footers, trees, signs, shrubs and soil sampling Case Drain Output Flow Range (gpm) Pressure Range (psi) HA15EBOA * E Series Auger Planetary Drive No hex 15 25 1500 3750 320 $ 2,621.00 HA20EBOA * E Series Auger Planetary Drive No hex 20 30 1500 3750 320 2,838.00 HA30EBOA * E Series Auger Planetary Drive Yes hex 30 40 1500 5000 460 4,502.00 HA35EBOA * E Series Auger Planetary Drive Yes hex 35 45 1500 5000 465 4,829.00 * Auger mounting bracket required, see below. OPTIONS TO BASE UNIT MODELS Description 2 Hex Collar FAH6 Double Flighted Auger 6 dia. x 50 long 54 $ 320.00 FAH9 Double Flighted Auger 9 dia. x 50 long 80 484.00 FAH12 Double Flighted Auger 12 dia. x 50 long 104 521.00 FAH15 Double Flighted Auger 15 dia. x 50 long 117 598.00 FAH18 Double Flighted Auger 18 dia. x 50 long 137 746.00 FAH24 Double Flighted Auger 24 dia. x 50 long 214 888.00 FAH30 Double Flighted Auger 30 dia. x 50 long 280 1,010.00 FAH36 Double Flighted Auger 36 dia. x 50 long 385 1,390.00 FAH24TR Double Flighted Tree Auger 12 /24 dia. x 50 long 209 961.00 FAH30TR Double Flighted Tree Auger 15 /30 dia. x 50 long 240 1,101.00 FAH36TR Double Flighted Tree Auger 18 /36 dia. x 50 long 315 1,279.00 AUGER MOUNTING BRACKETS 1023257 Wain-Roy 1/8 yd. XLS-series (For Rigid Quick Couplers) 100 $ 909.00 1003090 Wain-Roy 1/4 yd. Original-series (For Rigid & Swinger Quick Couplers) 187 1287.00 1003091 Wain-Roy 1/2 yd. Original-series (For Rigid & Swinger Quick Couplers) 215 1365.00 NOTE: Wain-Roy XLS-series couplers will accept Original-series auger mounting brackets. OPTIONAL FEX12 Extension 12, Round 25 $ 376.00 FEX24 Extension 24, Round 40 415.00 FEX48 Extension 48, Round 49 692.00 FEXH12 Extension 12, Hex 25 277.00 FEXH24 Extension 24, Hex 45 415.00 FEXH48 Extension 48, Hex 49 692.00 S0100550 Converter Hex to Round 23 347.00 S0100551 Converter Round to Hex 23 347.00 NOTES: Specify make, model, flow and pressure of host machine when ordering. QD coupler kits available for most skid steer models. See Quick-Disconnect Coupler Kits on page 5-22.. 5-21
WOODS / ALITEC QUICK-DISCONNECT COUPLER KITS STANDARD-FLOW HIGH-FLOW WITH NO AUXILIARY HIGH-FLOW WITH AUXILIARY Make Description Price Description Price Description Price Bobcat Case VINTAGE VINTAGE HC357 HC243 HC211 HC279 HC211 Cat 1014197 Daewoo Gehl VINTAGE HC211 HC400 (#12 SAE O-Ring) Shpg. Wt. - 1.7 lbs. Poppet (#10 SAE O-Ring) Shpg. Wt. - 1.0 lbs. Ag Ball Valve (1/2-14 NPT) Shpg. Wt. - 0.9 lbs. (#10 SAE O-Ring) Shpg. Wt. - 1.6 lbs. Ag Ball Valve (1/2-14 NPT) Shpg. Wt. - 0.9 lbs. (#10 SAE O-Ring) Shpg. Wt. - 1.7 lbs. Ag Ball Valve (1/2-14 NPT) Shpg. Wt. - 0.9 lbs. (#12 SAE O-Ring) Shpg. Wt. - 1.7 lbs. $ 111.00 HC355 111.00 111.00 111.00 HC212 (#8 & #12 SAE O-Ring) Shpg. Wt. - 2.4 lbs. (#10 & #12 SAE O-Ring) Shpg. Wt. - 4.1 lbs. $ 175.00 HC356 245.00 1013825 111.00 HC278 109.00 1014196 111.00 HC212 111.00 1014195 HC305 (#8 & #12 SAE O-Ring) Shpg. Wt. - 3.4 lbs. (#10 & #12 SAE O-Ring) Shpg. Wt. - 4.1 lbs. (#8 & #12 SAE O-Ring) Shpg. Wt. - 2.4 lbs. Poppet & Ag Ball (#12 SAE O-Ring & 1/2-14 NPT Ball) Shpg. Wt. - 2.2 lbs. HC209 336.00 HC538 245.00 HC209 168.00 HC398 209.00 (#6, #8 & #12 SAE O-Ring) Shpg. Wt. - 3.2 lbs. (#8, #10 & #12 SAE O-Ring) Shpg. Wt. - 4.3 lbs. (#10 & #12 SAE O-Ring) Shpg. Wt. - 5.6 lbs. & Ag Ball (#10 & #12 SAE O-Ring & 1/2-14 NPT Ag Ball) Shpg. Wt. - 4.9 lbs. (#8, #10 & #12 SAE O-Ring) Shpg. Wt. - 5.0 lbs. (#10 & #12 SAE O-Ring & 1/2-14 NPT Ag Ball) Shpg. Wt. - 4.9 lbs. (#8 & #12 SAE O-Ring) Shpg. Wt. - 4.0 lbs. $ 277.00 487.00 415.00 347.00 382.00 347.00 277.00 John Deere HC310 (#12 SAE O-Ring) Shpg. Wt. - 1.6 lbs. 111.00 1013826 (#6 & #12 SAE O-Ring) Shpg. Wt. - 3.1 lbs. 209.00 1014198 (#6 & #12 SAE O-Ring) Shpg. Wt. - 4.6 lbs. 402.00 Komatsu 1013835 (#12 SAE O-Ring) Shpg. Wt. - 1.6 lbs. 175.00 1013833 (#12 SAE O-Ring) Shpg. Wt. - 3.8 lbs. 347.00 1013834 (#12 SAE O-Ring) Shpg. Wt. - 5.2 lbs. 487.00 New Holland HC310 (#12 SAE O-Ring) Shpg. Wt. - 1.6 lbs. 111.00 HC308 (#8 & #12 SAE O-Ring) Shpg. Wt. - 1.9 lbs. 243.00 1014199 (#8 & #12 SAE O-Ring) Shpg. Wt. - 4.3 lbs. 402.00 Scat Trak HC243 Poppet (#10 SAE O-Ring) Shpg. Wt. - 1.0 lbs. 111.00 HC537 (#12 SAE O-Ring) Shpg. Wt. - 4.6 lbs. 415.00 5-22
WOODS SKID STEER ATTACHMENTS TOOTHBARS CETB-SERIES STANDARD-DUTY TOOTHBARS Toothbar for farm and small loaders and most skid loaders Includes fasteners to attach to any skid loader bucket without a bolt-on edge installed 1/2- x 4-inch high strength steel Shanks are high strength steel Model/ Inside Bucket Width (in.) No. of Teeth CETB400 40 to 40-3/8 5 46 $ 427.00 CETB440 44 to 44-3/8 5 49 427.00 CETB445 44-1/2 to 44-7/8 5 49 427.00 CETB450 45 to 45-3/8 5 49 427.00 CETB455 45-1/2 to 45-7/8 5 49 427.00 CETB460 46 to 46-3/8 5 49 427.00 CETB465 46-1/2 to 46-7/8 6 49 427.00 CETB470 47 to 47-3/8 6 49 427.00 CETB475 47-1/2 to 47-7/8 6 55 427.00 CETB480 48 to 48-3/8 6 55 427.00 CETB485 48-1/2 to 48-7/8 6 49 427.00 CETB490 49 to 49-3/8 6 49 427.00 CETB495 49-1/2 to 49-7/8 6 49 427.00 CETB500 50 to 50-3/8 6 49 427.00 CETB505 50-1/2 to 50-7/8 6 50 427.00 CETB510 51 to 51-3/8 6 50 427.00 CETB515 51-1/2 to 51-7/8 6 50 427.00 CETB520 52 to 52-3/8 6 50 427.00 CETB525 52-1/2 to 52-7/8 6 50 427.00 CETB530 53 to 53-3/8 6 50 427.00 CETB535 53-1/2 to 53-7/8 6 60 427.00 CETB540 54 to 54-3/8 6 50 427.00 CETB545 54-1/2 to 54-7/8 6 50 427.00 CETB550 55 to 55-3/8 6 50 427.00 CETB555 55-1/2 to 55-7/8 6 50 427.00 CETB560 56 to 56-3/8 7 50 456.00 CETB565 56-1/2 to 56-7/8 7 52 456.00 CETB570 57 to 57-3/8 7 52 456.00 CETB575 57-1/2 to 57-7/8 7 52 456.00 CETB580 58 to 58-3/8 7 54 456.00 CETB585 58-1/2 to 58-7/8 7 54 456.00 CETB590 59 to 59-3/8 7 58 456.00 CETB595 59-1/2 to 59-7/8 7 59 456.00 NOTE: For 1000 Series loader buckets, order 1 less than size of bucket for toothbar. 5-23
WOODS SKID STEER ATTACHMENTS TOOTHBARS (Continued) CETB-SERIES STANDARD-DUTY TOOTHBARS (Continued) Model/ Inside Bucket Width (in.) No. of Teeth CETB600 60 to 60-3/8 7 59 $ 456.00 CETB605 60-1/2 to 60-7/8 7 59 456.00 CETB610 61 to 61-3/8 7 59 456.00 CETB615 61-1/2 to 61-7/8 7 59 456.00 CETB620 62 to 62-3/8 7 60 456.00 CETB625 62-1/2 to 62-7/8 7 60 456.00 CETB630 63 to 63-3/8 7 62 456.00 CETB635 63-1/2 to 63-7/8 7 61 456.00 CETB640 64 to 64-3/8 7 61 456.00 CETB645 64-1/2 to 64-7/8 7 64 456.00 CETB650 65 to 65-3/8 8 64 489.00 CETB655 65-1/2 to 65-7/8 8 64 489.00 CETB660 66 to 66-3/8 8 66 489.00 CETB665 66-1/2 to 66-7/8 8 67 489.00 CETB670 67 to 67-3/8 8 67 489.00 CETB675 67-1/2 to 67-7/8 8 68 489.00 CETB680 68 to 68-3/8 8 68 489.00 CETB685 68-1/2 to 68-7/8 8 69 489.00 CETB690 * 69 to 69-3/8 8 69 489.00 CETB695 * 69-1/2 to 69-7/8 8 70 489.00 CETB700 * 70 to 70-3/8 8 70 489.00 CETB705 * 70-1/2 to 70-7/8 8 71 489.00 CETB710 * 71 to 71-3/8 8 71 489.00 CETB715 * 71-1/2 to 71-7/8 8 72 489.00 CETB720 * 72 to 72-3/8 8 72 489.00 CETB725 * 72-1/2 to 72-7/8 8 73 489.00 CETB730 * 73 to 73-3/8 8 73 489.00 CETB735 * 73-1/2 to 73-7/8 8 74 489.00 CETB740 * 74 to 74-3/8 8 74 489.00 CETB745 * 74-1/2 to 74-7/8 8 75 489.00 CETB750 * 75 to 75-3/8 8 75 489.00 CETB755 * 75-1/2 to 75-7/8 8 75 489.00 CETB760 * 76 to 76-3/8 9 76 523.00 CETB765 * 76-1/2 to 76-7/8 9 77 523.00 CETB770 * 77 to 77-3/8 9 77 523.00 CETB775 * 77-1/2 to 77-7/8 9 78 523.00 CETB780 * 78 to 78-3/8 9 78 523.00 CETB785 * 78-1/2 to 78-7/8 9 79 523.00 CETB790 * 79 to 79-3/8 9 79 523.00 CETB795 * 79-1/2 to 79-7/8 9 80 523.00 CETB800 * 80 to 80-3/8 9 80 523.00 CETB805 * 80-1/2 to 80-7/8 9 81 523.00 CETB810 * 81 to 81-3/8 9 81 523.00 CETB815 * 81-1/2 to 81-7/8 9 82 523.00 CETB820 * 82 to 82-3/8 9 82 523.00 CETB825 * 82-1/2 to 82-7/8 9 83 523.00 CETB830 * 83 to 83-3/8 9 83 523.00 CETB835 * 83-1/2 to 83-7/8 9 84 523.00 CETB840 * 84 to 84-3/8 9 84 523.00 CETB845 * 84-1/2 to 84-7/8 9 85 523.00 5-24
WOODS SKID STEER ATTACHMENTS PALLET FORKS PF-SERIES GENERAL PURPOSE FREE SWINGING PALLET FORKS FULL HEIGHT FRAME Designed for use on skid steer and compact tractor applications Free pivoting fork tine design Infinite fork spacing no lock positions Hitch compatible to SAE J2513 universal quick-attach standards Optional step kit for right or left side entry Standard height back guard for improved load stability Painted Alitec Gray Fork Rating @ 24 From Fork Tine Model No. Description Fork Face (lbs.) Size (in.) PF2042S 1022532 Pallet Fork General Purpose 2000 1.4 x 4 x 42 280 $ 1,002.00 1019880 Foot Step Kit 3 $ 41.00 1027925 Case 1800-Series Guide Kit 4 58.00 PF-SERIES STANDARD-DUTY AND HEAVY-DUTY PALLET FORKS LOW-GUARD FRAME Before use, host machine must comply with FOPS (Falling Object Protective Structure) requirements Designed for use on compact wheel loader and compact tractor applications Double rail-type lockdown fork tines 16-3/8 to 40-3/8 fork tine spacing (6 increments) Hitch compatible to SAE J2513 universal quick-attach standards Optional step kit for right or left side entry Integrated load point for tie-down and lifting purposes Low height back guard for added fore-and-aft clearance with host machine Safety lock plate prevents fork tines from disengaging from frame Painted Alitec Gray Model No. Description Fork Rating @ 24 From Fork Face (lbs.) Fork Tine Size (in.) PF4036SLG 1027945 Pallet Fork Standard-Duty 4000 1.4 x 4 x 36 347 $ 1,097.00 PF4042SLG 1027946 Pallet Fork Standard-Duty 4000 1.4 x 4 x 42 378 1,172.00 PF4048SLG 1022720 Pallet Fork Standard-Duty 4000 1.4 x 4 x 48 392 1,235.00 PF6048SLG 1022722 Pallet Fork Heavy-Duty 6000 1.6 x 4 x 48 476 1,541.00 1019883 Foot Step Kit 4 $ 33.00 1022017 Lift Clevis Kit 3 20.00 WARNING: Attachment selection and application must not exceed skid steer model rated operating loads or other specific requirements. All Operator s Manual and mounting instructions must be followed.. 5-25
WOODS SKID STEER ATTACHMENTS PALLET FORKS (Continued) & BALE SPEAR PF-SERIES STANDARD-DUTY AND HEAVY-DUTY PALLET FORKS FULL HEIGHT FRAME Designed for use on skid steer and compact tractor applications (PF6048S not recommended for compact tractor application) Double rail-type lockdown fork tines 16-3/8 to 40-3/8 fork tine spacing (6 increments) Hitch compatible to SAE J2513 universal quick-attach standards Optional step kit for right or left side entry Integrated load point for tie-down and lifting purposes Standard height back guard for improved load stability Safety lock plate prevents fork tines from disengaging from frame Painted Alitec Gray Model No. Description Fork Rating @ 24 From Fork Face (lbs.) Fork Tine Size (in.) PF4036S 1022778 Pallet Fork Standard-Duty 4000 1.4 x 4 x 36 394 $ 1,075.00 PF4042S 1022779 Pallet Fork Standard-Duty 4000 1.4 x 4 x 42 409 1,150.00 PF4048S 1022780 Pallet Fork Standard-Duty 4000 1.4 x 4 x 48 428 1,213.00 PF6048S 1022775 Pallet Fork Heavy-Duty 6000 1.6 x 4 x 48 625 1,518.00 1019883 Foot Step Kit 4 $ 33.00 1022017 Lift Clevis Kit 3 20.00 BS-SERIES BALE SPEAR Lift capacity: 2,000 4,000 lbs Single spear (1030889): 49 inches x 2-inch diameter main spear; tapered, drop forged, high strength alloy steel; penetrates solid core bales Three spears (1021837): 43 inches x 1-3/4-inch diameter; tapered, drop forged, high strength alloy steel; penetrates solid core bales Model No. Description Width (in.) Maximum Lift Capacity (lbs.) BS2049S 1030889 Single Bale Spear 45 2000 207 $ 855.00 1021837 Bale Spear with 3 Tines for Large Bales 4000 250 1,197.00 NOTE: BS2049S Bale Spear is not for use on Kioti quick-attach loaders or New Holland hydraulic skid steer couplers. WARNING: Attachment selection and application must not exceed skid steer model rated operating loads or other specific requirements. All Operator s Manual and mounting instructions must be followed. 5-26
WOODS SKID STEER ATTACHMENTS MANURE FORKS & GRAPPLE FORK ATTACHMENT MF-SERIES MANURE FORKS Replaceable round teeth Various tooth spacing Sturdy, reinforced design for extra strength Model No. Description Width (in.) Quantity Teeth Optional* Add l Teeth MF6000 52756 60 Manure Fork 60 8 7 349 $ 1,989.00 MF6600 52757 66 Manure Fork 66 9 8 377 2,122.00 MF7200 52758 72 Manure Fork 72 10 9 410 2,259.00 NOTE: The MF6000, MF6600, and MF7200 Manure Forks are designed to accept our GF3000 Grapple Fork Attachment. Please see page 5-27 for price and specifications. GF3000 AGRICULTURAL GRAPPLE FORK ATTACHMENT Attaches to MF6000, MF6600, & MF7200 manure forks Fork opens to 35 inches for large agricultural handling jobs Pivot points may be lubricated for long life Model No. Description GF3000 52753 Agricultural Grapple Attachment attaches to either MF6000, MF6600 or MF7200 Manure Fork Width (in.) 49-1/4 260 $ 2,122.00 HOSE KITS** Description 54401 1/4 Hose 4 4 $ 162.00 54402 1/4 Hose 5 5 175.00 54403 1/4 Hose 6 5 188.00 ** Hose Kits do not include QD couplers. WARNING: Attachment selection and application must not exceed skid steer model rated operating loads or other specific requirements. All Operator s Manual and mounting instructions must be followed. 5-27